ZH
RU
ES

Epoxy polymer material

Epoxy polymer material, Total:499 items.

In the international standard classification, Epoxy polymer material involves: Test conditions and procedures in general, Analytical chemistry, Reinforced plastics, Testing of metals, Environmental testing, Mining equipment, Rubber and plastics products, Plastics, Protection of and in buildings, Railway engineering in general, Materials and articles in contact with foodstuffs, Mechanical testing, Furniture, Medical equipment, Footwear, Installations in buildings, Construction materials, Bridge construction, Paints and varnishes, Materials for aerospace construction, Refractories, Sports equipment and facilities, Pharmaceutics, Medical sciences and health care facilities in general, Cellular materials, Wastes, Insulating materials, Information sciences. Publishing, Products of the chemical industry, Equipment for the chemical industry, Raw materials for rubber and plastics, Construction industry, Production in the chemical industry, Protection against fire, Space systems and operations, Welding, brazing and soldering, Environmental protection, Shipbuilding and marine structures in general, Solar energy engineering, Occupational safety. Industrial hygiene, Printed circuits and boards, Ceramics, Corrosion of metals, Construction technology, Fluid storage devices, Electronic component assemblies, Rails and railway components, Optics and optical measurements, Electrical accessories, Road engineering, Aerospace electric equipment and systems.

Group Standards of the People's Republic of China, Epoxy polymer material

T/CSCP 0011-2017 Atmospheric Environment Corrosion Test of Polymer Materials
T/CSTM 00043.4-2018 Atmospheric corrosion test— Part 4: Exposure corrosion tests of polymeric materials
T/NHXY 2-2019 PA polymer composite shoe toplift
T/CECS 10152-2021 Polymer mineral impermeable material
T/CNCIA 01005-2018 Definition of low VOCs content high solids, ultra high solids and solvent-free epoxy coating
T/CNCIA 01005-2022 Technical requirement for low VOCs content high solid/ultra high solid and solvent-free epoxy coatings
T/CAMDI 106-2023 Guidelines for the control of polymeric materials for use in medical devices
T/CECS 1044-2022 Technical standards for large-scale 3D printing of polymer composite materials
T/GZHG 026-2022 Modified anhydrous phosphogypsum for polymer road pipe network materials
T/CECS 603-2019 Technical specification for application of water based rubber polymer composite waterproof material
T/GAMA 19-2021 Additive manufacturing—Test method for shape memory properties of polymer materials—Bending testing
T/GAMA 20-2021 Additive manufacturing—Driving method for shape memory of polymer materials —UV thermal driving method
T/HAEPCI 095-2021 Technical specification for green-design product assessment- Polymer material-cover panel
T/SSPI 002-2021 Fast and intuitive test method of mildew resistance properties of macromolecular material products
T/QGCML 1380-2023 General Guide to Construction Technical Services of Reactive Polymer Materials for Coal Mines
T/ESD 3012-2023 Antistatic performance requirements for thermoplastic intrinsically static dissipative polymer materials

Korean Agency for Technology and Standards (KATS), Epoxy polymer material

KS M 9721-2017 Determination of PAHs (polycyclic aromatic hydrocarbons) in polymer materials
KS M 1072-2016(2021) Determination of TBBPA(Tetrabromobisphenol-A) and HBCD(Hexabromocyclododecan) in polymer materials
KS M 1072-2016 Determination of TBBPA(Tetrabromobisphenol-A) and HBCD(Hexabromocyclododecan) in polymer materials
KS G ISO 14359-2009(2019) Winter-sports equipment－Marking of parts made of polymer materials
KS M 1065-2005 Determination of mercury in polymer material, metallic material andelectronics by CV－AAS, AFS and ICP－AES/MS
KS B 5552-2004 Impact testing machines for plastic matelials－Instrumentation
KS P ISO 6474-2:2021 Implants for surgery — Ceramic materials — Part 2: Composite materials based on a high purity alumina matrix with zirconia reinforcement
KS P ISO 6474-1:2021 Implants for surgery — Ceramic materials —Part 1: Ceramic materials based on high purity alumina
KS M 1072-2008 Determination of TBBPA(Tetrabromobisphenol-A) and HBCD(Hexabromocyclododecan) in polymer materials
KS M 1991-2015 Determination of phthalates contents in polymer materials
KS M 1991-2016 Determination of phthalates contents in polymer materials
KS M 1991-2016(2021) Determination of phthalates contents in polymer materials
KS M 1063-2005 Determination of lead(Pb) and cadmium(Cd) in polymer materials byICP/AES, ICP－MS and AAS
KS M 1083-2019 Determination of tris(2-chloroethyl) phosphate(TCEP) in polymer materials
KS L 3128-3-2013 Chemical analysis of refractory products－Part 3：High alumina refractories
KS L ISO 21079-3-2012(2017) Chemical analysis of refractories containing alumina, zirconia, and silica－Refractories containing 5 % to 45 % of ZrO2(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spec
KS M ISO 14855-1:2013 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting condition ― Method by analysis of evolved carbon dioxide ― Part 1: General method
KS M ISO 14855-1:2010 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions-Method by analysis of evolved carbon dioxide-Part 1:General method
KS L ISO 21079-3-2012(2022) Chemical analysis of refractories containing alumina, zirconia, and silica－Refractories containing 5 % to 45 % of ZrO2(alternative to the X-ray fluorescence method)－Part 3：Flame atomic absorption spec
KS C IEC 61190-1-1-2006(2021) Attachment materials for electronic assembly－Part 1－1：Requirements for soldering fluxes for high-quality interconnections in electronics assembly
KS M ISO 11542-1:2006 Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials－Part 1：Designation system and basis for specifications
KS C IEC 61190-1-2-2006(2016) Attachment materials for electronic assembly－Part 1－2：Requirements for solder pastes for high-quality interconnections in electronics assembly
KS C IEC 61190-1-1-2006(2016) Attachment materials for electronic assembly－Part 1－1：Requirements for soldering fluxes for high-quality interconnections in electronics assembly
KS C IEC 61190-1-2:2021 Attachment materials for electronic assembly —Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly
KS M ISO 11542-1-2006(2021) Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials－Part 1：Designation system and basis for specifications
KS M ISO 11542-2-2011(2021) Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 11542-2-2011(2016) Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties
KS M ISO 11542-1-2006(2016) Plastics－Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials－Part 1：Designation system and basis for specifications
KS C IEC 61190-1-1:2006 Attachment materials for electronic assembly－Part 1－1：Requirements for soldering fluxes for high-quality interconnections in electronics assembly
KS C IEC 61249-4-1-2012(2022) Materials for printed boards and other interconnecting structures－Part 4-1：Sectional specification set for prepreg materials, unclad(for the manufacture of multilayer boards)－Epoxide woven E-glass pre
KS M ISO 11542-2:2011 Plastics-Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials-Part 2:Preparation of test specimens and determination of properties

Professional Standard - Electron, Epoxy polymer material

SJ/T 11125-1997 Encapsulation materials of expoy series for use in electronic components
SJ/T 11124-1997 Encapsulation materials of expoy series powder for use in electronic components
SJ/T 10633-1995 Atomic-absorption spectrophotometry of impurties in alumina for electron ceramic raw materials
SJ/T 10633-2022 Atomic absorption spectrophotometry of impurities in alumina, the raw material for electronic ceramics

Professional Standard - Commodity Inspection, Epoxy polymer material

SN/T 3549-2013 Food contact materials.Polymers.Determination of epoxidised soybean oil in food simulants.Gas chromatography-mass spectrometry
SN/T 2808-2011 Determination of 3-chloro-1,2 propylene oxide in food simulants of polymer materials in food contact materials for export Gas chromatography-mass spectrometry
SN/T 3042-2011 Food contact materials for export. Determination of antioxidants in polymers. Gas chromatography
SN/T 2823-2011 Determination of certain epoxy derivatives NOGE and its hydroxyl and chlorinated derivatives that are restricted in polymer materials for export food contact materials
SN/T 2274-2009 Rules for the inspection of food contact materials.Polymer materilas
SN/T 2274-2015 Food Contact Materials Inspection Regulations Polymer Materials
SN/T 3481.2-2014 Food contact materials.Polymers.Determination of hexabromocyclododecane.Part 2:Gas chromatography-mass spectrometry
SN/T 3481.1-2013 Food contact materials.Polymer materials.Determination of hexabromocyclododecane.Part 1:LC-MS/MS method
SN/T 4269-2015 Food contact materials.Polymer.Determination of 2-hydroxy-4-methoxy-benzophenon in food simulants.High performance liquid chromatography
SN/T 2940-2011 Food contact materials for export.Polymer materials.Determination of alkyl phenolic antioxidants in food simulants.Gas chromatography
SN/T 2809-2011 Food contact materials for export.Polymers.Determination of overall migration at high temperatures
SN/T 2888-2011 Determination of antimony in high-density polyethylene, a food contact material for export, by atomic fluorescence spectrometry
SN/T 3875-2014 Food contact materials.Polymers.Determination of azodicarbonamide content.High performance liquid chromatography
SN/T 3049-2011 Food contact materials for export. Polymers. Determination of tricresyl phosphate. High performance liquid chromatography
SN/T 3938-2014 Food contact materials.Polymers.Determination of organotin compounds.Gas chromatography-mass spectrometry
SN/T 3547-2013 Food contact materials.Polymers determination of styrene monomer.Gas chromatography
SN/T 2811-2011 Determination of extracts in polymer materials and rubber products of export food contact materials
SN/T 2282-2009 Food contact materials.Polyer materials.Determination of 2,2-bis(4-hydroxyphenyl)propane(Bisphenol A)in food simulants.HPLC method
SN/T 2741-2010 Determination of isocyanate content in polymer materials in food contact materials for import and export-University liquid chromatography method
SN/T 2928.1-2011 Method for identification type of waste polymer materials.Part 1:Waste plastics
SN/T 2183-2009 Food contact materials.Polymer materials.Determination of formaldehyde in food simuants.Spectrophotometry
SN/T 2183-2008 Food contact materials.Polymer materials.Determination of formaldehyde in food simuants.Spectrophotometry
SN/T 2184-2009 Food contact materials.Polymer materials.Determination of terephthalic acid in food simulants.HPLC
SN/T 2281-2009 Food contact materials.Polymer materials.Determination of acrylamide in food simulants.HPLC method
SN/T 2184-2008 Food contact materials.Polymer materials.Determination of terephthalic acid in food simulants.HPLC
SN/T 3047-2011 Food contact materials for export. Polymers. Determination of the migration of lactic acid. High performance liquid chromatography
SN/T 2812-2011 Determination of extracts from olefin polymers in polymer materials for export food contact materials
SN/T 2815-2011 Determination of Polyoxymethylene Polyoxymethylene Extract in High Molecular Materials for Export Food Contact Materials
SN/T 4322-2015 Determination of bisphenol A residues in food contact materials polymer materials by enzyme-linked immunosorbent assay
SN/T 3180-2012 Food contact materials.Polymers.Determination of residual solvent in plastic film.Gas chromatography
SN/T 3651-2013 Food contact materials.Polymers.Determination of laurolactam in food simulants.High performance liquid chromatography
SN/T 3652-2013 Food contact materials.Polymers.Determination of diphenyl carbonate in food simulants.High performance liquid chromatography(HPLC)
SN/T 2550-2010 Food contact materials.Polymer materials.Determination of 1,3-benzenedimethanamine in food simulants.HPLC metheod
SN/T 2821-2011 High performance liquid chromatography for the determination of benzaldehyde in food simulants of polymer materials in food contact materials for export
SN/T 3145-2011 Food contact materials for export.Polymers.Determination of extractives in acrylonitrile-butadiene-styrene copolymers, polyethylene phthalate polymers, ethylene-vinyl acetate copolymers and their products
SN/T 3041-2011 Food contact materials for export. Polymers. Determination of boric acid and sodium retraborate. ICP-MS method
SN/T 2825-2011 Determination of total volatile extractables in polymer materials, acrylic plastics, food contact materials for export
SN/T 3878-2014 Food contact materials.Polymers.Determination of azodicarbonamide in food simulants.High performance liquid chromatography
SN/T 3045-2011 Food contact materials for export. Polymers. Determination of migrat harmful aromatic amines. HPLC
SN/T 2810-2011 Determination of diphenyl sulfone and 4,4'-dichlorodiphenyl sulfone in polymer materials for export food contact materials by high performance liquid chromatography
SN/T 4010-2014 Food contact materials.Polymer materials.Determination of formaldehyde in food simulants.Liquid chromatography
SN/T 3877-2014 Food contact materials.Polymers.Determination of the 2-aminobenzamide in food simulants.High performance liquid chromatography
SN/T 2597-2010 Determination of lead,cadmium,chromium,arsenic,antimony,germanium migration quantity in polymer for food contact materials.Inductively coupled plasma atomic emission spectometry method
SN/T 3046-2011 Food contact materials for export. Polymers. Determination of 1，1-d ichloroethylene. Headspace gas chromatography
SN/T 2334-2009 Test method for total migration of food contact materials polymer materials in olive oil total immersion method
SN/T 2814-2011 Determination of extracts from gaskets used for export food contact materials, polymer materials, food container seals
SN/T 4268-2015 Food contact materials.Polymer materials.Determination of 2,4-dihydroxybenzophenone in food simulants.High performance liquid chromatography
SN/T 2928.3-2011 Method for identification type of waste polymer materials.Part 3:Waste fibers
SN/T 2928.2-2011 Method for identification type of waste polymer materials.Part 2:Waste rubbers
SN/T 3876-2014 Food contact materials.Polymers.Determination of 2,4-Diamino-6-hydroxypyrimidine in simulants.High performance liquid chromatography
SN/T 3048-2011 Food contact materials for export. Polymers. Determination of the degree of 1，4-diphenyl-1，3-butadiene(DPBD) transfer. High performance liquid chromatography
SN/T 4267-2015 Food contact materials.Polymer materials.Determination of 2,4-Diamino-6-phenyl-1,3,5-triazine in food simulants.High performance liquid chromatography
SN/T 2735-2010 Food contact materials.Polymers.Test methods for overall migration into olive oil food simulants by pouch
SN/T 2891-2011 Determination of chromium, zirconium, vanadium and hafnium in polymer materials polyethylene and polypropylene for export food contact materials Inductively coupled plasma atomic emission spectrometry
SN/T 2197-2009 Food contact materials.Polymer materials.Determination of acrylonitrile in food and food simulants.Gas chromatography
SN/T 2197-2008 Food contact materials.Polymer materials.Determination of acrylonitrile in food and food simulants.Gas chromatography
SN/T 4266-2015 Food contact materials.Polymer materials.Determination of 2,4,4'-Trichloro-2'-hydroxydiphenyl Ether(Triclosan) in food simulants.High performance liquid chromatography
SN/T 3388-2012 Food contact materials.Polymer.Determination of benzophenone and 4-methylbenzophenone in food simulants.High performance liquid chromatography
SN/T 2335-2009 Test method for total migration of food contact materials polymer materials in water-based food simulants Total immersion method
SN/T 2551-2010 Food contact materials.Polymer materials.Determination of 3,3-bis(3-methyl-4-hydroxyphenyl)-2-indoline in food simulants.HPLC method
SN/T 2819-2011 High performance liquid chromatography for the determination of BADGE, BFDGE and their hydroxyl and chlorinated derivatives in food simulants of polymer materials in food contact materials for export
SN/T 2817-2011 Test method for total migration in polymer materials olive oil simulant of food contact materials for export Test pool method
SN/T 3766-2014 General requirements of extraction technology for hazardous organisms in polymer parts of electrical and electronic products
SN/T 4121-2015 Food contact materials.Polymers.Determination of phthalates in olive oil simulant.Gas chromatography/mass spectrometer
SN/T 2333-2009 Food contact materials.Polymer materials.Determination of vinyl acetate in food stimulants by gas chromatography/mass spectrometry
SN/T 2820-2011 Food contact materials for export.Polymers.Test methods for overall migration into aqueous food simulants by cell
SN/T 2893-2011 Food contact materials for export.Polymers.Determination of primary aromatic amines in food simulants.Gas chromatography-mass spectrometry
SN/T 2895-2011 Food contact materials for export. Polymers. Determination of vinylidene chroride in food simulants. Headspace gas chromatography
SN/T 3052-2011 Food contact materials for export. Polymers. Determination of tricresyl phosphate in polyvinylchloride. Gas chromatography
SN/T 2283-2009 Food contact materials.Polymer materials.Determination of caprolactam and caprolactam in food simulants.Gas chromatography method
SN/T 3387-2012 Food contact materials.Polymer.Determination of dimethylaminoethanol in food simulants.Gas chromatography
SN/T 3548-2013 Food contact materials.Polymer materials.Determination of phosphates plasticizer.Gas chromatography-mass spectrometry (GC-MS) method
SN/T 2738-2010 Food contact materials for export.Polymers.Determination of ultraviolet-absorbance in food simulants of PMMA
SN/T 3386-2012 Food contact materials.Polymers.Test methods for overall migration into mixtures of 14C-labelled synthetic triglycerides
SN/T 3183-2012 Food contact materials.Polymers.Determination of methyl methacrylate in polymethyl methacrylate.Gas chromatography
SN/T 2894-2011 Determination of methyl methacrylate in food simulants of polymer materials for export food contact materials Gas chromatography-mass spectrometry

RU-GOST R, Epoxy polymer material

GOST R 56806-2015 Polymer composites. Identification of polymer composites in electronic databases
GOST R 56740-2015 Polymer composites. Method for determination of translaminar fracture toughness characteristic of polymer composite laminates and pultruded polymer composites
GOST R 56787-2015 Polymer composites. Nondestructive testing
GOST R 56807-2015 Polymer composites. Recording of mechanical test data of polymer composites in electronic databases. General requirements
GOST R 56796-2015 Polymer composites. Prepregs. Method for determination of constituent content of prepreg
GOST R 56795-2015 Polymer composites. Shearography of polymer composite materials, sandwich core materials and filament-wound pressure vessels
GOST R 54928-2012 Pedestrian bridges for polymer composites. Specifications
GOST R 56763-2015 Polymer composites. Method for determination of tensile strength of sandwich core materials
GOST 33348-2015 Polymer composites. Production of plates from prepregs for preparation of test specimens
GOST R 56800-2015 Polymer composites. Determination of tensile properties of unreinforced and reinforced materials
GOST R 56789-2015 Polymer composites. Prepreg. Method for determination of volatiles content in prepreg
GOST R ISO 6474-1-2014 Implants for surgery. Ceramic materials. Part 1. Ceramic materials based on high purity alumina
GOST R 56782-2015 Polymer composites. Prepregs. Determenation of constituent content of prepreg by Soxhlet extraction
GOST R 52021-2015 Epoxy resins and related materials. Methods for determination of chlorine mass fraction
GOST R 52021-2003 Epoxy resins and related materials. Methods for determination of mass percentage of chlorine
GOST R 56788-2015 Polymer composites. Test method open-hole compressive strength of polymer matrix composite laminates
GOST 33119-2014 Polymer composites constructions for foot-bridges. Specifications
GOST R 56760-2015 Polymer composites. Identification of fibers, fillers and core materials in computerized materials property databases
GOST R 56739-2015 Polymer composites. Method for determination of water migration in sandwich construction cores
GOST R 56792-2015 Polymer composites. Test method on stratifying with winding on drum
GOST 33347-2015 Polymer composites. Production of plates by pressing for preparation of test specimens
GOST R 56764-2015 Polymer composites. Method for measurement of thickness of sandwich construction cores
GOST R ISO 6474-2-2014 Implants for surgery. Ceramic materials. Part 2. Composite materials based on a high-purity alumina matrix with zirconia reinforcement
GOST R 56814-2015 Polymer composites. Ultrasonic testing of sandwich constructions face sheet and core material
GOST R 56811-2015 Polymer composites. Radiography of the outer layers and the material of the inner layer of the sandwich constructions
GOST R 56808-2015 Polymer composites. Method for determination interlaminar fracture toughness of unidirectional-reinforced composites
GOST R 56810-2015 Polymer composites. Test method for flexural flat samples
GOST R 56813-2015 Polymer composites. Guide for preparation of flat panel testing and machining
GOST R 55073-2012 Resistance polymer composites for repairing industrial pipe-line. Specifications
GOST 33350-2015 Polymer composites. Production of plates by transfer moulding for preparation of test specimens
GOST 33345-2015 Polymer composites. Production of plates for preparation of test specimens. General technical requirements
GOST R 58022-2017 Polymer composite crossarms. Method for determination of flexural mechanical properties
GOST R 56785-2015 Polymer composites. Test method for tensile of flat specimens
PNST 60-2015 Polymer soextrusion film modified nanocomposites. General specifications
GOST 33346-2015 Polymer composites. Production of plates by contact and spray-up moulding for preparation of test specimens
GOST R 56786-2015 Polymer composites. Method for determination of shear strength in the plane of the reinforcement
GOST R 56772-2015 Polymer composites. Method for determination static energy absorption properties of honeycomb sandwich core materials
GOST R 57218-2016 Electromagnetic compatibility for electronic equipment. Composites the polymeric radar absorbing. General technical requirements
GOST R 56798-2015 Polymer composites. Method for determination the mechanical characteristics of sandwich constructions flexural
GOST R 56812-2015 Polymer composites. Method for determination of mechanical characteristics in combined loading compression
GOST R 56799-2015 Polymer composites. Method of definition of mechanical characteristics at shear on samples with V-notched cut
GOST R 56815-2015 Polymer composites. Method for determination specific work of exfoliation in tearing off conditions GIC
GOST R 56774-2015 Polymer composites. Determination of two-dimensional mechanical characteristics of bending sandwich constructions subjected to a distributed load
GOST R 59180-2021 Automobile roads of general use. Polymeric materials applied for waterproofing bridge deck. Test methods
GOST R 59179-2021 Automobile roads of general use. Polymeric materials applied for waterproofing bridge deck. Technical regulations

Japanese Industrial Standards Committee (JISC), Epoxy polymer material

JIS Z 2282:1996 Method of cyclic oxidation testing at elevated temperatures for metallic materials
JIS K 7201:1995 Testing method for flammability of polymeric materials using the oxygen index method
JIS K 6953-1:2011 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 1: General method
JIS R 1751-1:2013 Fine ceramics (advanced ceramics, advanced technical ceramics).Test method for air purification performance of photocatalytic materials under indoor lighting environment -- Part 1: Removal of nitric oxide
JIS K 6936-1:2007 Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
JIS K 6936-2:2007 Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Epoxy polymer material

GB/T 20644.2-2006 Specific environmental condition-Guidance for choosing-Part2:Polymer materials
GB 18173.1-2000 Polymer water-proof materials-Part 1:Water-proof sheet
GB 18173.1-2006 Polymer water-proof materials.Part 1:Water-proof sheet
GB 18173.1-2012 Polymer water-proof materials.Part 1:Water-proof sheet
GB/T 26696-2011 Polymer board for furniture
GB 18173.2-2000 Polymer water-proof materials Part 2:Waterstop
GB 18173.2-2014 Polymer water-proof materials.Part 2:waterstop
GB/T 6900.8-1986 Fireclay and high-alumina refractories--Determination of calcium oxide and magnesium oxide content--Atomic absorption spectrophotometric method
GB/T 6900.9-1986 Fireclay and high-alumina refractories--Determination of potassium oxide and sodium oxide content--Atomic absorption spectrophotometric method
GB 6900.8-1986 Clay, high alumina refractories chemical analysis methods atomic absorption spectrophotometry determination of calcium oxide, magnesium oxide content
GB 6900.9-1986 Clay, high alumina refractories chemical analysis methods atomic absorption spectrophotometry determination of potassium oxide, sodium oxide content
GB/T 36264-2018 Test method for tensile strength of fiber composites under ultrahigh temperature and oxidizing environment
GB/T 20643.3-2006 Special environmental condition-Environmental test method-Part3:Artificial environmental test method and guidance-Polymer material
GB/T 42618-2023 Additive manufacturing—Design—Laser-based powder bed fusion of polymers
GB/T 18173.3-2014 Polymer water-proof materials.Part 3:Hydrophilic expasion rubber
GB/T 18173.3-2002 Polymer water--Proof materials Part 3: Hydrophilic expasion rubber
GB/T 23296.9-2009 Food contact materials.Polymer.Determination of acrylamide in food simulants.High performance liquid chromatography
GB/T 23296.10-2009 Food contact materials.Polymer.Determination of terephthalic in food simulants.High performance liquid chromatography
GB/T 23296.25-2009 Food contact materials.Polymer.Determination of 1,3-benzenedimethanamine in food simulants.High performance liquid chromatography
GB/T 23296.12-2009 Food contact materials.Polymer.Determination of 11-aminoundecanoic acid in food simulants.High performance liquid chromatography
GB/T 6901.8-1986 Silica refractories--Determination of calcium oxide content--Atomic absorption spectrophotometric method
GB/T 6901.9-1986 Silica refractories--Determination of potassium oxide and sodium oxide content--Atomic absorption spectrophotometric method
GB/T 6900.5-1986 Fireclay and high-alumina refractories--Determination of titanium dioxide content--Hydrogen peroxide photometric method
GB 6900.5-1986 Clay, high alumina refractories chemical analysis method hydrogen peroxide photometric determination of titanium dioxide content
GB/T 23296.14-2009 Food contact materials.Polymer.Determination of vinyl chloride in food simulants.Gas chromatography
GB/T 23296.8-2009 Food contact materials.Polymer.Determination of acrylonitrile in food simulants.Gas chromatography
GB/T 23296.2-2009 Food contact materials.Polymer.Determination of 1,3-butadiene in food simulants.Gas chromatography
GB/T 23296.19-2009 Food contact materials.Polymer.Determination of vinyl acetate in food simulants.Gas chromatography
GB/T 23296.15-2009 Food contact materials.Polymer.Determination of 2,4,6-triamino-1,3,5-triazine(melamine)in food simulants.High performance liquid chromatography
GB/T 6900.4-1986 Fireclay and high-alumina refractories--Determination of aluminium oxide content--EDTA volumetric method
GB/T 6900.6-1986 Fireclay and high-alumina refractories--Determination of calcium oxide content--EDTA volumetric method
GB 6900.4-1986 Clay, high alumina refractory chemical analysis method EDTA volumetric method for determination of alumina content
GB/T 6901.8-2004 Chemical analysis of silica refractories-Part 8:Determination of calcium oxide and magnesium oxide-Atomic absorption spectrophotometric method
GB/T 6901.9-2004 Chemical analysis of silica refractories-Part 9:Determination of potassium oxide and sodium oxide-Atomic absorption spectrophotometric method
GB/T 23296.6-2009 Food contact materials.Polymer.Determination of 4-methyl-1-pentene in food simulants.Gas chromatography
GB/T 23296.23-2009 Food contact materials.Polymer.Determination of 1,1,1-trimethylolpropane in food simulants.Gas chromatography
GB/T 23296.26-2009 Food contact materials.Polymer.Determination of formaldehyde and hexamethylenetetramine in food simulants.Spectrophotometry
GB/T 18173.4-2010 Polymer water-proof materials.Part 4:Rubber gasket for shield-driven tunnel
GB 18173.4-2010 Polymer water-proof materials.Part 4:Rubber gasket for shield-driven tunnel
GB/T 2423.33-2005 Environmental testing for electric and electronic products Part 2:Test Method Test Kca:High concentration sulfur dioxide
GB/T 23296.16-2009 Food contact materials.Polymer.Determination of 2,2-bis(hydroxyphenyl) propane(bisphenol A)in food simulants.High performance liquid chromatography
GB/T 23296.21-2009 Food contact materials.Polymer.Determination of maleic acid and maleic anhydride in food simulants.High performance liquid chromatography
GB/T 6901.10-1986 silica refractories--Determination of manganese oxide content--Atomic absorption spectrophotometric method
GB/T 5070.12-2002 Chemical analysis of magnesia chromite refractories--Part 12: Determination of potassium oxide and sodium oxide--Atomic absorption spectrophotometric method
GB/T 23296.17-2009 Food contact materials.Polymer.Determination of 1,2-diaminoethane and 1,6-diaminohexane in food simulants.Gas chromatography
GB/T 23296.18-2009 Food contact materials.Polymer.Determination of monoethylene glycol and diethylene glycol in food simulants.Gas chromatography
GB/T 23296.4-2009 Food contact materials.Polymer.Determination of 1-octene and tetrahydrofuran in food simulants.Gas chromatography
GB/T 21461.1-2008 Plastics.Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials.Part 1:Designation system and basis for specifications
GB 6900.11-1986 The white ceramic standard plate for colorimetry and photometry
GB/T 6900.10-1986 Fireclay and high-alumina refractories--Determination of manganese oxide content--Ammonium persulfate photometric method
GB/T 6900.11-1986 Fireclay and high-alumina refractories--Determination of phosphorous pentoxide content--Molybdenum blue photometric method
GB/T 23296.20-2009 Food contact materials.Polymer.Determination of caprolactam salt in food simulants.Gas chromatography
GB/T 23296.5-2009 Food contact materials.Polymer.Determination of dimethylaminoethanol in food simulants.Gas chromatography
GB/T 21461.2-2008 Plastics.Ultra-high-molecular-weight polyethylene(PE-UHMW)moulding and extrusion materials.Part 2:Preparation of test specimens and determination of properties
GB/Z 21738-2008 Fundamental structures of one dimensional nano-materials.High resolution transmission electron microscopy characterization
GB/T 5069.13-2001 Chemical analysis of magnesia and magnesia-alumina refractory materials--Flame atomic absorption spectrometric method for determination of potassium oxide and sodium oxide content
GB/T 6900.2-1986 Fireclay and high-alumina refractories--Determination of silicon dioxide content--Gravimetric-molybdenum blue photometric method
GB 6900.2-1986 Clay, high-alumina refractories chemical analysis method gravimetric - molybdenum blue photometric method for determination of silica content

American Society for Testing and Materials (ASTM), Epoxy polymer material

ASTM F641-98a Standard Specification for Implantable Epoxy Electronic Encapsulants
ASTM F641-98a(2003) Standard Specification for Implantable Epoxy Electronic Encapsulants
ASTM F641-09 Standard Specification for Implantable Epoxy Electronic Encapsulants
ASTM F641-09(2014) Standard Specification for Implantable Epoxy Electronic Encapsulants
ASTM D6712-01(2009) Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
ASTM D6712-01 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
ASTM D4020-05 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
ASTM D4020-11 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
ASTM G21-13 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM D4020-18 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
ASTM D7290-06(2011) Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications

Hebei Provincial Standard of the People's Republic of China, Epoxy polymer material

DB13/T 1511-2012 Polymer reinforcement materials for mining
DB13/T 1081.22-2009 Food packaging materials and plastic products - Part 22: Determination of ethylene oxide and propylene oxide content
DB13/T 5127.10-2019 Determination of Toxic and Hazardous Substances in Implantable Medical Device Polymer Material Extracts by Gas Chromatography for Migration of Ethylene Oxide
DB13/T 1081.20-2009 Plastics for food packaging materials and products - Part 20: Determination of epichlorohydrin content

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Epoxy polymer material

GB/T 18173.1-2012 Polymer water-proof materials - Part 1：Water-proof sheet
GB/T 18173.2-2014 Polymer water-proof materials―Part 2: waterstop
GB/T 5019.12-2017 Specification for insulating materials based on mica— Part 12：Glass fabric backup epoxy dry mica tape with high porosity

Professional Standard - Building Materials, Epoxy polymer material

JC/T 2679-2022 Waterproof material for sloping roof Polymer flashing material

Professional Standard - Railway, Epoxy polymer material

TB/T 2927-2015 Polymer insularors for rails
TB/T 2927-1998 Polymer material rail insulation
TB/T 2927-1998/XG1-2006 Polymer material rail insulation

Professional Standard-Safe Production, Epoxy polymer material

AQ/T 1087-2020 Polymer materials for water plugging in coal mines
AQ 1089-2011 Polymer material for consolidating coal and rock in mine
AQ/T 1089-2020 Polymer materials for strengthening coal and rock mass in coal mines
AQ/T 1089-2011 Polymer materials for strengthening coal and rock mass in coal mines
AQ 1087-2011 Technical specification of coal mine water shutoff polymer
AQ 1090-2011 Polymer foaming material for filling and sealing in coal mine
AQ/T 1090-2020 Polymer foam material for coal mine filling and sealing
AQ/T 1090-2011 Polymer foam material for coal mine filling and sealing
AQ 1088-2011 Technical specification of coal mine spraying polymer for sealing ventilation
AQ/T 1088-2011 Technical conditions of polymer materials for coal mine spraying plugging
AQ 1117-2020 Management specification for the safe use of polymer materials for grouting in coal mines
AQ 1116-2020 General safety technical specifications for polymer materials used in coal mine reinforcement, water shutoff, filling and spraying

国家质量监督检验检疫总局, Epoxy polymer material

SN/T 3184-2012 Food contact materials Determination of bis(hydroxyphenyl)methane-bis(2,3-epoxypropyl) ether in polymer food simulants Gas chromatography-mass spectrometry
SN/T 2816-2011 Test method for total migration of polymeric materials for exported food contact materials at low temperatures
SN/T 2824-2011 Guidelines for Selection of Total Migration Test Conditions and Methods of Polymer Materials for Exported Food Contact Materials
SN/T 4765-2017 Determination of hexachloro-1,3-butadiene in polymer materials for food contact materials by gas chromatography-mass spectrometry
SN/T 2818-2011 Test method for total migration in olive oil simulants of polymer materials for exported food contact materials Filling method
SN/T 2822-2011 Determination of the interface temperature between plastic and food during the heating process of exported food contact materials, polymer materials, plastics and products in microwave ovens or traditional furnaces

ES-AENOR, Epoxy polymer material

UNE 53-216-1991
UNE 53-184-1990
UNE 53-234-1992 Plastics. Flexible cellular polymeric materials. Determination of tear strength
UNE 53-171-1990
UNE 53-170-1990
UNE 53-366-1985
UNE 53-493-1991
UNE 135-360-1994 Vertical road traffic signs. Signing of guiding traffic. Junction marker in the polymeric material. Characteristics, dimensions and test methods

Military Standard of the People's Republic of China-General Armament Department, Epoxy polymer material

GJB 10078-2021 Specification for mesh polymer explosion suppression materials

British Standards Institution (BSI), Epoxy polymer material

PD IEC/TS 62788-7-2:2017 Measurement procedures for materials used in photovoltaic modules. Environmental exposures. Accelerated weathering tests of polymeric materials
PD IEC TS 63209-2:2022 Photovoltaic modules. Extended-stress testing. Polymeric component materials
PD IEC/TS 62788-2:2017 Measurement procedures for materials used in photovoltaic modules. Polymeric materials. Frontsheets and backsheets
BS 1000[678]:1981 Universal Decimal Classification - English full edition - Industries based on macromolecular materials - Rubbers - Plastics
BS EN ISO 22526-2:2021 Plastics. Carbon and environmental footprint of biobased plastics - Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
BS EN IEC 62788-6-2:2020 Measurement procedures for materials used in photovoltaic modules - General tests. Moisture permeation testing of polymeric materials
19/30398777 DC BS EN IEC 62788-1-1. Measurement procedures for materials used in photovoltaic modules. Part 1-1. Encapsulants. Polymeric materials used for encapsulants
BS EN ISO 14855-1:2012 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide. General method
BS EN ISO 14855-1:2007 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - General method
19/30394473 DC BS EN IEC 62788-2-1. Measurement procedures for materials used in photovoltaic modules. Part 2-1. Polymeric materials. Frontsheet and backsheet. Safety requirements
BS EN 61249-2-7:2002 Materials for interconnection structures - Sectional specification set for reinforced base materials, clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad
BS EN ISO 11542-2:1999 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Preparation of test specimens and determination of properties
BS EN ISO 11542-1:2001 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Designation system and basis for specifications
BS EN 61249-2-39:2013 Materials for printed boards and other interconnecting structures. Reinforced base materials clad and unclad. High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-fre

Professional Standard - Traffic, Epoxy polymer material

JT/T 901-2014 Polymer materials sliding plate for bridge bearings

Liaoning Provincial Standard of the People's Republic of China, Epoxy polymer material

DB21/T 2617-2016 Polymer material aluminum composite radiator
DB21/T 2838-2017 On-site test method for core material thickness of polymer waterproof material composite sheet (FS2)
DB21/T 2839-2017 Test method for mineral filler content in polymer waterproof material composite sheet (FS2)
DB21/T 2837-2017 On-site test method for mass per unit area of polymer waterproof material composite sheet (FS2)

交通运输部, Epoxy polymer material

JT/T 901-2023 Polymer material skateboard for bridge supports

IN-BIS, Epoxy polymer material

IS 1527-1972

SAE - SAE International, Epoxy polymer material

SAE AMS3733C-2015 Potting Compound@ Epoxy Two Part@ Highly Filled@ Heat Cure@ High Compressive Strength
SAE AMS3915A-2015 Advanced Composites Prepreg - Nominal 250 degree F Cure - Glass Fiber and Epoxy Resin, 7781 Weave Fabric
SAE AMS3914A-2015 Advanced Composites Prepreg - Nominal 250 °F Cure - 12K Tow Carbon Fiber and Epoxy Resin, Plain Weave Fabric

Professional Standard - Medicine, Epoxy polymer material

YY/T 1294.2-2015 Implants for Surgery—Ceramic materials—Part 2:Composite materials based on a high purity alumina matrix with zirconia reinforcemen

Society of Automotive Engineers (SAE), Epoxy polymer material

SAE AMS3915-2013 Advanced Composites Prepreg - Nominal 250 degree F Cure - Glass Fiber and Epoxy Resin, 7781 Weave Fabric
SAE AMS3733B-1993 (Noncurrent)Potting Compound, Epoxy Two Part, Highly Filled, Heat Cure, High Compressive Strength
SAE AMS2980/5-2006 Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Material Specification: Carbon Fiber Fabrics, Plain Weave, 193 g/m2, and Epoxy Resin
SAE AMS2980/5A-2014 Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Material Specification: Carbon Fiber Fabrics, Plain Weave, 193 g/m2, and Epoxy Resin
SAE AMS6562-2023 Medium Temperature, Out-of-Autoclave, Oven-Vacuum-Bag Cure Epoxy Resin Impregnated Fiber Reinforced Composite Materials
SAE AMS3914-2012 Advanced Composites Prepreg - Nominal 250 °F Cure - 12K Tow Carbon Fiber and Epoxy Resin, Plain Weave Fabric
SAE AMS2980/5A-2021 Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 5 - Carbon Fiber Fabrics, Plain Weave, 193 g/m2, and Epoxy Resin
SAE AMS2980B-2021 Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 0 - Introduction
SAE AMS2980/1B-2021 Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 1 - General Requirements
SAE AMS3970/6-2011 Carbon Faber Fabric Repair Prepreg, 120 °C (205 \MDF)Vacuum Curing - Part 6: Material Specification: Carbon Fiber Fabric Reinforced Epoxy Prepreg for Repair, Plain Weave Fabric, 190 g/m<(hoch)2>, Adhesive Film for Repair and Non-Structural Glass Fiber Fab
SAE AMS6562/1-2023 Medium Temperature, Out-of-Autoclave, Oven-Vacuum-Bag Cure Epoxy Resin Impregnated Fiber Reinforced Composite Materials, Type 35, Class 4, Grade 293, Style 7781
SAE AMS2980A-2006 Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 0 - Introduction
SAE AMS2980B-2014 Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material, Part 0 - Introduction
SAE AMS2980-1996 Technical Specification: Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 0 - Introduction
SAE AMS2980-2000 TECHNICAL SPECIFICATION: CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL PART 0 - INTRODUCTION
SAE AMS2980/4B-2021 Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 4 - Purchasing Specification - Resin
SAE AMS2980/2B-2021 Carbon Fiber Fabric and Epoxy Resin Wet Lay-up Repair Material Part 2 - Qualification Program
SAE AMS2980/3B-2021 Carbon Fiber Fabric and Epoxy Resin Wet Lay-Up Repair Material Part 3 – Purchasing Specification - Fabric

Jilin Provincial Standard of the People's Republic of China, Epoxy polymer material

DB22/T 2203-2014 High-performance liquid chromatography for the determination of triclosan in food contact materials polymer materials

SE-SIS, Epoxy polymer material

SIS SS 87 564 62-1989 Dental materials — Determination of colour stability of dental polymeric materials
SIS SS-EN 27 491-1992 Dentistry — Dental materials — Determination of colour stability of dental polymeric materials

International Organization for Standardization (ISO), Epoxy polymer material

ISO 6474-2:2012 Implants for surgery - Ceramic materials - Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement
ISO 6474-1:2010 Implants for surgery - Ceramic materials - Part 1: Ceramic materials based on high purity alumina
ISO 6474-2:2019 Implants for surgery — Ceramic materials — Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement
ISO 6474-1:2019 Implants for surgery — Ceramic materials — Part 1: Ceramic materials based on high purity alumina
ISO 14624-4:2003 Space systems - Safety and compatibility of materials - Part 4: Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environments
ISO 22526-2:2020 Plastics — Carbon and environmental footprint of biobased plastics — Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
ISO 14855-1:2005 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method
ISO 11114-3:2010 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere
ISO 14855-1:2005/Cor 1:2009 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method; Technical Corrigendum 1
ISO 11542-1:2001 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 21304-1:2019 Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications
ISO 17168-1:2018 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment - Part 1: Removal of nitric oxide

Association Francaise de Normalisation, Epoxy polymer material

NF ISO 14359:1997 Équipements de sports d'hiver - Marquage des parties en matières polymères
NF S94-064-2:2012 Implants for surgery - Ceramic materials - Part 2 : composite materials based on a high-purity alumina matrix with zirconia reinforcement.
NF ISO 6474-1:2019 Implants chirurgicaux - Matériaux céramiques - Partie 1 : matériaux céramiques à base d'alumine de haute pureté
NF EN 61249-2-39:2013 Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 2-39 : matériaux de base renforcés, plaqués et non plaqués - Feuilles stratifiées en tissu de verre de type E époxyde et non époxyde à haute performance, plaqué...
XP D25-201-22*XP CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22 : determination of ethylene oxide and propylene oxide in plastics
NF S94-064-1*NF ISO 6474-1:2019 Implants for surgery - Ceramic materials - Part 1 : ceramic materials based on high purity alumina
NF S94-064-2*NF ISO 6474-2:2019 Implants for surgery - Ceramic materials - Part 2 : composite materials based on a high-purity alumina matrix with zirconia reinforcement
XP CEN/TS 13130-22:2005 Matériaux et objets en contact avec les denrées alimentaires - Substances dans les matières plastiques soumises à des limitations - Partie 22 : détermination des oxydes d'éthylène et de propylène dans les matières plastiques
NF EN ISO 22526-2:2021 Plastiques - Empreinte carbone et environnementale des plastiques biosourcés - Partie 2 : empreinte carbone des matériaux, quantité (masse) de CO2 captée dans l'air et incorporée dans les molécules de polymères
NF ISO 6474-2:2019 Implants chirurgicaux - Produits céramiques - Partie 2 : matériaux composites à matrice alumine de haute pureté renforcée par des grains de zircone
NF EN ISO 14720-2:2013 Essais des matières premières pour produits réfractaires - Dosage du soufre dans les matières premières non oxydantes sous la forme de poudre et de granulés - Partie 2 : spectrométrie d'émission optique avec plasma induit par haute fréquence ...
NF EN ISO 17348:2017 Industries du pétrole et du gaz naturel - Choix des matériaux pour tubes de cuvelage et de production et équipements de fond en environnement à haute teneur en CO2
NF EN 61249-2-19:2002 Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 2-19 : matériaux de base renforcés, plaqués et non plaqués - Feuilles multicouches de fibre de verre linéaire cohérente avec résine époxyde pour hautes températ...
NF EN 61249-2-40:2013 Matériaux pour circuits imprimés et autres structures d'interconnexion - Partie 2-40 : matériaux de base renforcés, plaqués et non plaqués - Feuilles stratifiées en tissu de verre de type E époxyde non halogéné à haute performance, plaquée...
NF C26-113-5*NF EN 60371-3-5:2006 Insulating materials based on mica - Part 3 : specifications for individual materials - Sheet 5 : glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI)
NF C26-183-2/A1*NF EN 60893-3-2/A1:2012 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2 : specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins
XP D25-201-20*XP CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20 : determination of epichlorohydrin in plastics
NF EN 60371-3-6/A1:2007 Spécification pour les matériaux isolants à base de mica - Partie 3 : spécifications pour matériaux particuliers - Feuille 6 : papier de mica renforcé de verre avec un agglomérant en résine époxyde à l'état B
NF EN 60371-3-5:2006 Matériaux isolants à base de mica - Partie 3 : spécifications pour matériaux particuliers - Feuille 5 : papier de mica renforcé de verre avec un agglomérant en résine époxyde pour post-imprégnation (VPI)
NF EN 60371-3-6:1995 Spécification pour les matériaux isolants à base de mica - Partie 3 : spécifications pour matériaux particuliers - Feuille 6 : papier de mica renforcé de verre avec un agglomérant en résine époxyde à l'état B.
NF B40-675-2*NF EN ISO 14720-2:2013 Testing of ceramic raw and basic materials - Determination of content of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2: inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after
NF E29-648-3*NF EN ISO 11114-3:2011 Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3 : autogenous ignition test for non-metallic materials in oxygen atmosphere
NF C93-780-2-39*NF EN 61249-2-39:2013 Materials for printed boards and other interconnecting structures - Part 2-39 : reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-cla
NF C90-700-1-2:2002 Attachment materials for electronic assembly - Part 1-2 : requirements for solder pastes for high-quality interconnections in electronics assembly.
NF C90-700-1-1*NF EN 61190-1-1:2002 Attachment materials for electronic assembly - Part 1-1 : Requirements for soldering fluxes for high-quality interconnections in electronics assembly
NF EN 61190-1-2:2014 Matériaux de fixation pour les assemblages électroniques - Partie 1-2 : exigences relatives aux pâtes à braser pour les interconnexions de haute qualité dans les assemblages de composants électroniques
NF EN 61190-1-1:2002 Matériaux de fixation pour les assemblages électroniques - Partie 1-1 : exigences relatives aux flux de brasage pour les interconnexions de haute qualité dans les assemblages de composants électroniques
NF C26-183-2*NF EN 60893-3-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2 : specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins.
NF C26-113-6/A1*NF EN 60371-3-6/A1:2007 Specification for insulating materials based on mica - Part 3 : specifications for individual materials - Sheet 6 : glass-backed mica paper with a B-stage epoxy resin binder
NF EN 60371-3-4/A1:2007 Spécification pour les matériaux isolants à base de mica - Partie 3 : spécifications pour matériaux particuliers - Feuille 4 : papier de mica renforcé d'un film polyester avec un agglomérant en résine époxyde à l'état B
NF T51-230-1:2001 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1 : designation system and basis for specifications.

BELST, Epoxy polymer material

STB 1333.0-2002 Polymer products for building. The method of determination of longevity on an activation energy of thermal - oxidizing destruction of polymer materials
STB 4.230-98 Product-quality index system. Building. Polymer finishing material and products. Nomenclature of characteristics

Professional Standard - Supply and Marketing Cooperative, Epoxy polymer material

GH/T 1344-2021 Management specification for waste polymer materials processing base

Anhui Provincial Standard of the People's Republic of China, Epoxy polymer material

DB34/T 2726-2016 Management specification for waste polymer materials processing base
DB34/T 2334-2015 Test method for safety performance of polymer materials used in coal mines to strengthen coal and rock mass

Xinjiang Provincial Standard of the People's Republic of China, Epoxy polymer material

DB65/T 3604-2014 Dry heat atmospheric exposure test method for polymer materials

AENOR, Epoxy polymer material

UNE 53199:2015 Plastics. Polymeric materials, cellular flexible. Determination of solvents swelling
UNE-CEN/TS 13130-22:2006 EX Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics
UNE-CEN/TS 13130-20:2006 EX Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics

KR-KS, Epoxy polymer material

KS P ISO 6474-2-2021 Implants for surgery — Ceramic materials — Part 2: Composite materials based on a high purity alumina matrix with zirconia reinforcement
KS P ISO 6474-1-2021 Implants for surgery — Ceramic materials —Part 1: Ceramic materials based on high purity alumina
KS C IEC 61190-1-2-2021 Attachment materials for electronic assembly —Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly
KS C IEC 61249-4-2-2008 Materials for printed boards and other interconnecting structures－Part 4－2：Sectional specification set for prepreg materials, unclad－Multifunctional epoxide woven E-glass prepreg of defined flammabili

CEN - European Committee for Standardization, Epoxy polymer material

PD CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics
PD CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics
EN ISO 21304-1:2019 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications

Danish Standards Foundation, Epoxy polymer material

DS/CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics
DS/EN 61249-2-39:2013 Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad
DS/CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics
DS/EN ISO 11114-3:2011 Gas cylinders – Compatibility of cylinder and valve materials with gas contents – Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere
DS/EN ISO 21079-3:2008 Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively
DS/ISO 12856-2:2020 Railway applications – Polymeric composite sleepers, bearers and transoms – Part 2: Product testing
DS/EN 61190-1-2:2007 Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly
DS/ISO 21304-2:2021 Plastics – Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties
DS/EN 61190-1-1:2002 Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly
DS/EN ISO 11542-1:2001 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications

German Institute for Standardization, Epoxy polymer material

DIN CEN/TS 13130-22:2005-05 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics; German version CEN/TS 13130-22:2005
DIN EN 61249-2-39:2013-09 Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-c...
DIN EN 1890:2006 Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide English version of DIN EN 1890:2006-09
DIN 51604-1:2020 FAM-testing fluid for polymer materials - Composition and requirements - Part 1: Testing Fluid A
DIN 51604-1:2020-02 FAM-testing fluid for polymer materials - Composition and requirements - Part 1: Testing Fluid A
DIN CEN/TS 13130-22:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 22: Determination of ethylene oxide and propylene oxide in plastics; German version CEN/TS 13130-22:2005
DIN EN ISO 14720-2:2013 Testing of ceramic raw and basic materials - Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Part 2: Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning in
DIN ISO 4638:1993-07 Polymeric materials, cellular flexible; determination of air flow permeability; identical with ISO 4638:1984
DIN 51604-2:2020 FAM-testing fluid for polymer materials - Composition and requirements - Part 2: Testing Fluid B, containing methanol
DIN 51604-2:2020-02 FAM-testing fluid for polymer materials - Composition and requirements - Part 2: Testing Fluid B, containing methanol
DIN EN 60371-3-5 Berichtigung 1:2007 Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5 : Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI) (IEC 60371-3-5:2005); German version EN 60371-3-5:2006, Corrigenda to DIN EN 60
DIN EN ISO 14855-1:2007 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method (ISO 14855-1:2005) English version of DIN EN ISO 14855-1:2007-11
DIN EN ISO 14855-1:2008 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method (ISO 14855-1:2005); German version EN ISO 14855-1:2007
DIN CEN/TS 13130-20:2005-05 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics; German version CEN/TS 13130-20:2005
DIN EN 61190-1-2:2014-11 Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly (IEC 61190-1-2:2014); German version EN 61190-1-2:2014 / Note: DIN EN 61190-1-2 (2007-11) remains valid al...
DIN EN 60371-3-5:2006 Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 5 : Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI) (IEC 60371-3-5:2005); German version EN 60371-3-5:2006
DIN 51604-3:2020 FAM-testing fluid for polymer materials - Composition and requirements - Part 3: Testing Fluid C, methanol containing lower layer
DIN EN 61190-1-2:2007 Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly (IEC 61190-1-2:2007); German version EN 61190-1-2:2007
DIN CEN/TS 13130-20:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 20: Determination of epichlorohydrin in plastics; German version CEN/TS 13130-20:2005
DIN 16783-2:1991 Ultra-high molecular weight polyethylene (PE-UHMW) moulding materials; preparation of test specimens and determination of properties
DIN 51604-3:2020-02 FAM-testing fluid for polymer materials - Composition and requirements - Part 3: Testing Fluid C, methanol containing lower layer
DIN EN ISO 21304-1:2019-08 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21304-1:2019); German version EN ISO 21304-1:2019

American National Standards Institute （ANSI), Epoxy polymer material

ANSI/ASTM D6712:2001 Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
ANSI/ASTM D4020:2001 Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials (08.02)

国家市场监督管理总局、中国国家标准化管理委员会, Epoxy polymer material

GB/T 40260-2021 Test method for determining gas permeability of polymer membrane materials
GB/T 38231-2019 Corrosion of metals and alloys—Test method for thermal-cycling exposure oxidation testing under high-temperature corrosion conditions for metallic materials

Professional Standard - Chemical Industry, Epoxy polymer material

HG/T 4375-2012 Modified material of ultra-high molecular weight polyethylene for pipe lining

HU-MSZT, Epoxy polymer material

MSZ 7254-1968

ES-UNE, Epoxy polymer material

UNE-EN 61249-2-39:2013 Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-c...
UNE-EN ISO 22526-2:2022 Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020)
UNE-EN 61190-1-2:2014 Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly (Endorsed by AENOR in July of 2014.)
UNE-EN 61190-1-1:2002 Attachment materials for electronic assembly -- Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly (Endorsed by AENOR in November of 2002.)
UNE-EN 61249-4-1:2008 Materials for interconnecting structures -- Part 4-1: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability. (Endorsed by AENOR in September of 2008.)
UNE-EN 60371-3-7:1995/A1:2006 Specification for insulating materials based on mica -- Part 3: Specifications for individual materials -- Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping (IEC 60371-3-7:1995/A1:2006). (Endorsed by AENOR in Mar...
UNE-EN ISO 21304-1:2020 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 21304-1:2019)

Professional Standard - Aerospace, Epoxy polymer material

QJ 10014.4-2011 Space systems.Safety and compatibility of materials.Part 4:Determination of upward flammability of materials in pressurized gaseous oxygen or oxygen-enriched environment
QJ/Z 164.1-1986 Thermal aging test method for polymer materials Aging test guidelines
QJ/Z 164.2-1986 Data processing specification for thermal aging test method of polymer materials

NEMA - National Electrical Manufacturers Association, Epoxy polymer material

NEMA C29.14A-2019 Composite Insulators Guy (Strain) Insulator Type (Ultra-Violet Light Resistant Polymer Material Covered Rod Type)

CN-STDBOOK, Epoxy polymer material

图书 3-9736 Safety and Reliability Standard Manual of Polymer Building Materials

Association of German Mechanical Engineers, Epoxy polymer material

DVS 2226-4-1998 Testing of joints on waterproof sheeting made of polymer materials - Creep tension test on polyethylene

European Committee for Standardization (CEN), Epoxy polymer material

EN 1890:2006 Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide
EN 1890:1999 Surface Active Agents - Determination of Cloud Point of Non-Ionic Surface Active Agents Obtained by Condensation of Ethylene Oxide
EN ISO 22526-2:2021 Plastics - Carbon and environmental footprint of biobased plastics - Part 2: Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule (ISO 22526-2:2020)
EN 12582:1999 Surface active agents - Determination of the polyethylene glycol content according to molar mass in non-ionic surface active agents (ethoxylated) by HPLC/ELSD
EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
prEN 868-6-1992 Packaging materials for sterilization of wrapped goods; part 6: paper for the manufacture of packs for medical use for sterilization by ethylene oxide of irradiation; requirements and tests
prEN 30993-7-1993 Biological testing of medical and dental materials and devices; part 7: ethylene oxide sterilization residuals (ISO/DIS 10993-7)

United States Navy, Epoxy polymer material

NAVY QPL-24613-33-2007 DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC

Underwriters Laboratories (UL), Epoxy polymer material

UL SUBJECT 746R-2014 Outline of Investigation for Restricted Use Substances in Polymeric Materials (Issue 1)

BR-ABNT, Epoxy polymer material

ABNT NBR 15804-1-2010 Polymeric materials for medical applications Part 1- Specification for polycarbonate resin

未注明发布机构, Epoxy polymer material

BS EN ISO 22526-2:2021(2022) Plastics — Carbon and environmental footprint of biobased plastics Part 2 : Material carbon footprint, amount (mass) of CO2 removed from the air and incorporated into polymer molecule
SAE AMS3970/6-2016 Carbon Faber Fabric Repair Prepreg, 120 °C (205 \MDF)Vacuum Curing - Part 6: Material Specification: Carbon Fiber Fabric Reinforced Epoxy Prepreg for Repair, Plain Weave Fabric, 190 g/m<(hoch)2>, Adhesive Film for Repair and Non-Structural Glass Fiber Fab
BS EN ISO 11542-2:1998(2007) Plastics — Ultra - high - molecular - weight polyethylene (PE - UHMW) moulding and extrusion materials — Part 2 : Preparation oftest specimens and determination ofproperties

海关总署, Epoxy polymer material

SN/T 5155-2019 Testing methods for food contact materials: Determination of crotonic acid content in polymeric material food simulants by high performance liquid chromatography
SN/T 5323-2021 Determination of the migration amount of parabens in food contact materials, polymer materials, plastics, liquid chromatography-tandem mass spectrometry
SN/T 5309-2021 Determination of nonylphenol and octylphenol in food contact materials polymeric materials food simulants liquid chromatography-tandem mass spectrometry

Lithuanian Standards Office , Epoxy polymer material

LST EN 61249-2-39-2013 Materials for printed boards and other interconnecting structures -- Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-cla
LST EN 61249-4-18-2014 Materials for printed boards and other interconnecting structures -- Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (
LST EN 61249-4-19-2014 Materials for printed boards and other interconnecting structures -- Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of define
LST EN ISO 21079-3:2008 Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) - Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively

European Committee for Electrotechnical Standardization（CENELEC）, Epoxy polymer material

EN 61249-2-39:2013 Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad
EN 61190-1-2:2014 Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly
EN 61249-4-19:2013 Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non-halogenated epoxide woven E-glass prepreg of defined
EN 61249-4-18:2013 Materials for printed boards and other interconnecting structures - Part 4-18: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance epoxide woven E-glass prepreg of defined flammability (v

PL-PKN, Epoxy polymer material

PN K02505-1993 Rolling stock. Concentration carbon monoxide and carbon dioxide emitted by pyrolysis or combustion of materials. Requirements and tests

CZ-CSN, Epoxy polymer material

CSN 72 6026 Cast.3-1990 Refractories. Magnesite and magnesi- te-lime materials. Determination of Si- licon dioxide. Gravimetric, photome- tric and atomic absorption methods.

International Electrotechnical Commission (IEC), Epoxy polymer material

IEC 60317-3-4:1992 Specification for insulating materials based on mica - Part 6:Specification for individual materials - Polyester film - backed mica paper with a B-stage epoxy resin binder
IEC 60371-3-4:1992 Specification for insulating materials based on mica; part 3: specifications for individual materials; sheet 4: polyester film-backed mica paper with a B-stage epoxy resin binder
IEC 61249-2-39:2012 Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad
IEC 61190-1-2:2002 Attachment materials for electronic assembly - Part 1-2: Requirements for solder pastes for high-quality interconnections in electronics assembly
IEC 60371-3-7:1995/COR1:1995 Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping
IEC 60371-3-5:1992 Specification for insulating materials based on mica; part 3: specifications for individual materials; sheet 5: glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI)
IEC 60371-3-7:1995 Insulating materials based on mica - Part 3: Specifications for individual materials - Sheet 7: Polyester film mica paper with an epoxy resin binder for single conductor taping
IEC 61249-4-19:2013 Materials for printed boards and other interconnecting structures - Part 4-19: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - High performance non- halogenated epoxide woven E-glass prepreg of define
IEC 61190-1-1:2002 Attachment materials for electronic assembly - Part 1-1: Requirements for soldering fluxes for high-quality interconnections in electronics assembly
IEC 61190-1-2:2014 Attachment materials for electronic assembly - Part 1-2: Requirements for soldering paste for high-quality interconnects in electronics assembly

Professional Standard - Machinery, Epoxy polymer material

JB/T 10442.3-2004 Insulating paper coaded with resin binder forming rhombic pattern for electrical purposes Part 3:Individual materials Insulating paper coaded with epoxy resin binder forming rhombic pattern
JB/T 7777.5-1995 Silver tin oxide indium oxide electrical contact material chemical analysis method flame atomic absorption spectrometry Determination of nickel, zinc and indium content
JB/T 7777.5-2008 Test methods for chemical analysis of silver-tin oxide-indium oxide electric contact material.Part 5:Determination of nickel,zinc and indium contents
JB/T 7774.4-1995 Silver zinc oxide electrical contact material chemical analysis method flame atomic absorption spectrometry determination of nickel content
JB/T 7776.3-1995 Methods for chemical analysis of silver cadmium oxide electrical contact materials - Determination of zinc content by flame atomic absorption spectrometry
JB/T 7774.5-1995 Methods of chemical analysis of silver zinc oxide electrical contact materials - Determination of magnesium content by flame atomic absorption spectrometry
JB/T 7774.6-1995 Methods of chemical analysis of silver zinc oxide electrical contact materials - Determination of cadmium content by flame atomic absorption spectrometry
JB/T 7776.2-1995 Methods for chemical analysis of silver cadmium oxide electrical contact materials - Determination of cadmium content by flame atomic absorption spectrometry
JB/T 7776.4-1995 Methods of chemical analysis of silver cadmium oxide electrical contact materials - Determination of nickel content by flame atomic absorption spectrometry
JB/T 7776.7-1995 Methods for chemical analysis of silver cadmium oxide electrical contact materials - Determination of magnesium content by flame atomic absorption spectrometry

Fujian Provincial Standard of the People's Republic of China, Epoxy polymer material

DB35/T 2073-2022 Technical Guidelines for Recycling and Resource Utilization of Waste Polymer Materials in Industrial Parks

国家能源局, Epoxy polymer material

NB/T 51069-2017 Test method for thermal safety performance of polymer materials used in coal mine reinforcement of coal and rock mass

工业和信息化部, Epoxy polymer material

HG/T 5225-2017 Antistatic halogen-free flame retardant ultra-high molecular weight polyethylene pipe lining special material

CENELEC - European Committee for Electrotechnical Standardization, Epoxy polymer material

EN 60371-3-5:1995 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 5: Glass-Backed Mica Paper with an Epoxy Resin Binder for Post-Impregnation (VPI)
EN 61190-1-2:2002 Attachment Materials for Electronic Assembly Part 1-2: Requirements for Solder Pastes for High-Quality Interconnections in Electronic Assembly
EN 61190-1-2:2007 Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly
HD 352.3.6 S1-1994 Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 6: Glass-Backed Mica Paper with a B-Stage Epoxy Resin Binder

GOSTR, Epoxy polymer material

GOST R IEC 61190-1-1-2020 Materials for electronic modules. Part 1-1. Requirements for soldering fluxes for high-quality interconnections in electronics assembly
GOST R ISO 14624-4-2010 Space systems. Safety and compatibility of materials. Part 4. Determination of upward flammability of material in pressurized gaseous or oxygen-enriched environments

Professional Standard - Agriculture, Epoxy polymer material

SN/T 5079-2018 Determination of four kinds of fluorescent whitening agents in food simulants of polymer materials in food contact materials by liquid chromatography-mass spectrometry/mass spectrometry

European Association of Aerospace Industries, Epoxy polymer material

AECMA PREN 2002-2-1999 Aerospace Series Metallic Materials Test Methods Part 2: Tensile Testing at Elevated Temperature Edition P3
AECMA PREN 2002-2-2003 Aerospace Series Metallic Materials Test Methods Part 2: Tensile Testing at Elevated Temperature Edition P 3