ZH

RU

ES

Low temperature test pool

Low temperature test pool, Total:107 items.

In the international standard classification, Low temperature test pool involves: Fuel cells, Aircraft and space vehicles in general, Environmental testing, Electrical accessories, Road vehicles in general, Galvanic cells and batteries, Rectifiers. Convertors. Stabilized power supply, Leather technology, Energy and heat transfer engineering in general, Fibre optic communications, Rubber, Road vehicle systems, Lubricants, industrial oils and related products, Agricultural machines, implements and equipment, Radiation protection, Electromechanical components for electronic and telecommunications equipment, Refractories, Electricity. Magnetism. Electrical and magnetic measurements, TESTING, ELECTRICAL ENGINEERING, Installations in buildings.


Group Standards of the People's Republic of China, Low temperature test pool

  • T/GHDQ 47-2019 Technical conditions of fuel cell stack life test at subzero environment for fuel cell vehicles in frigid regions
  • T/CSAE 122-2019 Test methods for cold startperformancesof fuel cell electric vehicles under sub-zero temperature
  • T/GDCKCJH 054-2022 Technical performance and test method of low temperature rechargeable lithium ion battery for outdoor energy storage
  • T/BSRS 089-2022 Technical requirements on liquid effluent discharge for pool-type low-temperature heating reactor

SE-SIS, Low temperature test pool

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Low temperature test pool

  • GB/T 33979-2017 Test methods for proton exchange membrane fuel cell power system at subzero environment
  • GB/T 33861-2017 Testing method of energy efficiency for temperature test chambers

CZ-CSN, Low temperature test pool

Military Standards (MIL-STD), Low temperature test pool

Standard Association of Australia (SAA), Low temperature test pool

  • AS 60068.2.40:2003 Environmental testing - Tests - Test Z/AM: Combined cold/low air pressure tests
  • AS 1774.1:2000 Refractories and refractory materials - Physical test methods - Determination of cold compressive strength

PT-IPQ, Low temperature test pool

  • NP ISO 3383:1999 Rubber General directions for achieving elevated or subnormal temperaturas for test purposes

GM Daewoo, Low temperature test pool

British Standards Institution (BSI), Low temperature test pool

  • BS EN IEC 62984-3:2020 High-temperature secondary batteries - Sodium-based batteries. Performance requirements and tests
  • BS EN 60068-2-1:2007 Environmental testing - Tests - Test A. Cold
  • BS EN IEC 62984-2:2020 High-temperature secondary batteries - Safety requirements and tests
  • BS EN 60068-3-2:1999 Environmental testing. Guidance. Combined temperature/low air pressure tests
  • BS 903-A29:1997 Physical testing of rubber - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
  • 19/30359901 DC BS EN 62984-3-1. High temperature secondary batteries. Part 2. Safety requirements and tests of cells and batteries
  • BS EN 60068-2-39:2016 Tracked Changes. Environmental testing. Tests. Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
  • BS ISO 789-12:2000 Agricultural tractors. Test procedures - Low temperature starting
  • BS ISO 2921:2019 Rubber, vulcanized. Determination of low-temperature characteristics. Temperature-retraction procedure (TR test)
  • BS ISO 2921:2011 Rubber, vulcanized. Determination of low-temperature retraction (TR test)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Low temperature test pool

  • GB/T 31035-2014 Test methods for proton exchange membrane fuel cell stack at subzero environment
  • GB/T 10589-2008(英文版) Specifications for low temperature test chambers
  • GB/T 7758-1987 Rubber, vulcanized--Determination of low temperature characteristics--Temperature-retraction procedure(TR test)
  • GB/T 7758-2002 Rubber,vulcanized--Determination of low-temperature characteristics--Temperature-retraction procedure (TR test)
  • GB/T 10590-1989 Specification for low temperature/low air pressure test chambers

Professional Standard - Electron, Low temperature test pool

  • SJ/T 10459-1993 Measurement method for temperature coefficients of solar cell
  • SJ 2858-1988 Method for measurement of thermoelectric refrigeration modules properties--Test method for temperature difference and maximum cold side temperature
  • SJ/T 10212-1991 Testing equipment,high and low temperature/low air pressure Y60600-G

工业和信息化部, Low temperature test pool

  • YD/T 4152-2022 Low-temperature valve-regulated lead-acid battery for communication

(U.S.) Telecommunications Industries Association , Low temperature test pool

Japanese Industrial Standards Committee (JISC), Low temperature test pool

  • JIS K 6542:1974 Testing methods for cold resistance of leather
  • JIS K 6261-3:2017 Rubber, vulcanized or thermoplastic -- Determination of low-temperature properties -- Part 3: Low temperature stiffening (Gehman test)
  • JIS K 6261-4:2017 Rubber, vulcanized or thermoplastic -- Determination of low-temperature properties -- Part 4: Low-temperature retraction (TR test)
  • JIS S 3200-2:1997 Equipment for water supply service -- Test method of low temperature resistant

IPC - Association Connecting Electronics Industries, Low temperature test pool

PL-PKN, Low temperature test pool

  • PN C04237-05-1991 Rubber test methods at Iow temperatur? Determination of stiffening (Gehman test)
  • PN H04311-1967 S?a?ic ?ensile testing of me?als at Iow temperatures
  • PN-EN IEC 62984-3-2021-01 E High-temperature secondary batteries - Part 3: Sodium-based batteries - Performance requirements and tests (IEC 62984-3:2020)

GM Global, Low temperature test pool

  • GMW 14692-2012 Methods of Test for Sound Deadener Pads; Test for Low Temperature Resistance Issue 2; English

Association Francaise de Normalisation, Low temperature test pool

ES-UNE, Low temperature test pool

  • UNE-EN IEC 62984-3:2020 High-temperature secondary batteries - Part 3: Sodium-based batteries - Performance requirements and tests (Endorsed by Asociación Española de Normalización in July of 2020.)
  • UNE-EN IEC 62984-2:2020 High-temperature secondary batteries - Part 2: Safety requirements and tests (Endorsed by Asociación Española de Normalización in June of 2020.)
  • UNE-EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests

RO-ASRO, Low temperature test pool

American National Standards Institute (ANSI), Low temperature test pool

Society of Automotive Engineers (SAE), Low temperature test pool

TIA - Telecommunications Industry Association, Low temperature test pool

Korean Agency for Technology and Standards (KATS), Low temperature test pool

  • KS M ISO 2921-2014(2019) Rubber, vulcanized — Determination of low-temperature retraction (TR test)
  • KS R 0016-1971(2010) Method of high and low temperature test for automobile parts
  • KS C IEC 60068-2-39:2018 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
  • KS C 0277-2013 Background information, Section 0ne -Cold and dry heat tests

Professional Standard - Aerospace, Low temperature test pool

  • QJ 1402-1988 Test method for low temperature thermal conductivity of metals
  • QJ 20027-2011 Test method for thermal conductivity of thermal conductive grease at low temperature
  • QJ 1086-1986 Cryogenic temperature measurement specification for liquid rocket engine test
  • QJ 968-1986 Test method for low temperature specific heat capacity of solid materials
  • QJ 1521-1988 Test method for deep low temperature specific heat capacity of solid materials

Indonesia Standards, Low temperature test pool

YU-JUS, Low temperature test pool

  • JUS N.C0.056-1980 Testing offlacible cords and cables. Elasticity at low temperatures
  • JUS N.A5.901-1984 Basic environmental testing procedures. Test Z/AMD: Combined sequential cold, low air pressure, and damp heat test

SAE - SAE International, Low temperature test pool

ECIA - Electronic Components Industry Association, Low temperature test pool

  • 364-59-1988 TP-59 Low Temperature Test Procedure for Electrical Connectors

American Society for Testing and Materials (ASTM), Low temperature test pool

  • ASTM D5133-01 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
  • ASTM E1311-89(2004) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems

GOSTR, Low temperature test pool

  • GOST R IEC 62984-3-2020 High-temperature secondary batteries. Part 3. Sodium-based batteries. Performance requirements and test methods

SG-SPRING SG, Low temperature test pool

  • SS 11 Pt.17-1986 Methods Of Sampling And Test For Oils And Fats Part 17 : Cold Test

BE-NBN, Low temperature test pool

  • NBN T 31-022-1985 Rubber, vulcanized - Low température stiffening (Gehman test) - Determination
  • NBN T 31-031-1985 Rubber, vulcanized - Determinationof low temperature characteristics- Temperature-re-traction procedure(TR test)

TR-TSE, Low temperature test pool

  • TS 3047-1978 METHOD OF TEST FOR TEMPERATURE LIMIT OF BRITTLENESS FOR VULCANIZED RUBBERS

International Organization for Standardization (ISO), Low temperature test pool

  • ISO 2921:2005 Rubber, vulcanized - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
  • ISO 1432:1976 Title missing - Legacy paper document
  • ISO 2921:1975 Title missing - Legacy paper document
  • ISO 2921:2011 Rubber, vulcanized - Determination of low-temperature retraction (TR test)
  • ISO 1432:1982 Rubber, vulcanized — Low temperature stiffening (Gehman test) — Determination

Lithuanian Standards Office , Low temperature test pool

European Committee for Electrotechnical Standardization(CENELEC), Low temperature test pool

  • EN IEC 62984-2:2020 High-temperature secondary batteries - Part 2: Safety requirements and tests

KR-KS, Low temperature test pool

  • KS C IEC 60068-2-39-2018 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests

International Electrotechnical Commission (IEC), Low temperature test pool

  • IEC 60068-2-39:2015 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests

Professional Standard - Aviation, Low temperature test pool

  • HB 5237-1983 Determination of low temperature properties of vulcanized rubber - Test method for retraction temperature (TR test)

AT-ON, Low temperature test pool

  • ONORM C 9436-1994 Testing of elastomers - Determination of compression set under constant deflection at normal temperature, at higher and low temperatures

Jilin Provincial Standard of the People's Republic of China, Low temperature test pool

  • DB22/T 3410-2022 Low-temperature performance requirements and test methods for traction batteries for pure electric vehicles in alpine regions

VN-TCVN, Low temperature test pool

  • TCVN 3939-1984 Metals.Method for testing the impact strength at low temperature

AENOR, Low temperature test pool

  • UNE-ISO 2921:2017 Rubber, vulcanized. Determination of low temperature retraction (TR test)




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved