ZH
RU
ES

Instruments for the determination of specific rotation

Instruments for the determination of specific rotation, Total:343 items.

In the international standard classification, Instruments for the determination of specific rotation involves: Products of the chemical industry, Cinematography, Products of the textile industry, Glass, Coatings and related processes used in aerospace industry, Metalliferous minerals, Radiation protection, Plastics, Optics and optical measurements, Optical equipment, Vibrations, shock and vibration measurements, Paint ingredients, Testing of metals, Construction industry, Linear and angular measurements, Nuclear energy engineering, Crude petroleum, Gears, Radiation measurements, Metrology and measurement in general, Measurement of volume, mass, density, viscosity, Construction technology, Surface treatment and coating, Rubber, Waxes, bituminous materials and other petroleum products, Construction materials, General methods of tests and analysis for food products, Air quality, Optoelectronics. Laser equipment, Cereals, pulses and derived products, Measurement of fluid flow, Medical equipment, Electrical wires and cables, Analytical chemistry, Soil quality. Pedology, Inks. Printing inks, Vocabularies, Industrial automation systems, Standardization. General rules, Environmental testing, Electrical engineering in general, Protection against fire, Thermodynamics and temperature measurements, Non-destructive testing, Lubricants, industrial oils and related products, CONSTRUCTION MATERIALS AND BUILDING, Acoustics and acoustic measurements, Fuels, Electromagnetic compatibility (EMC), Electricity. Magnetism. Electrical and magnetic measurements, Mechanical testing, Aids for disabled or handicapped persons, Ceramics, Rotating machinery, Protection against dangerous goods, Audio, video and audiovisual engineering.

Group Standards of the People's Republic of China, Instruments for the determination of specific rotation

T/FDCA 004-2020 Cosmetics—Determination of viscosity—Rotational rheometer method
T/CSTM 00277.2-2022 Evaluation of stability for analytical instruments Part 2: Evaluation based on the precision of intra-laboratory determination results

RU-GOST R, Instruments for the determination of specific rotation

GOST 8910-1975 Measuring instruments of film length. Assumed perforation. Gear ratios
GOST R ISO 105-J02-1999 Textiles. Tests for colour fastness. Part J02. Instrumental assessment of relative whiteness
GOST ISO 2954-1997 Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity
GOST 14618.9-1978 Essential oils, aromatics and their intermediates. Method for determination of angle of optical rotation and specific rotation value of polarization flat
GOST R ISO 105-A06-1999 Textiles. Tests for colour fastness. Part A06. Instrumental determination of 1/1 standard depth of colour
GOST R 51368-1999 Climatic environment stability test methods for machines, instruments and other industrial products. Test for stability influence of temperature
GOST R ISO 105-A05-1999 Textiles. Tests for colour fastness. Part A05. Instrumental assessment of change in colour for determination of grey scale rating
GOST 8.141-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means, measuring specific heat of solid bodies within temperature range of 273,15 up to 700 K
GOST 8.159-1975 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring specific heat-conduction of solid frames in the range of temperatures 400-1800 K
GOST 8.176-1985 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring specific heat-conduction of solid frames in the range of temperature 1800-3000 K
GOST 8.178-1985 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means, measuring specific heat of solids at temperature from 90 to 273,15 K
GOST R 51369-1999 Climatic environment stability test methods machines, instruments and other industrial products. Test for influence of humidity
GOST 30805.16.4.2-2013 Electromagnetic compatibility of technical equipment. Uncertainty in electromagnetic compatibility measurements
GOST 8.661-2018 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring surface flatness parameters of optical surfaces up to 200 mm
GOST IEC 61262-6-2011 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 6. Determination of the contrast ratio and veiling glare index
GOST R 8.797-2012 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring the heat flux surface density in the range from 1 to 10000 W/m2
GOST R 8.766-2011 State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring mass concentration dissolving in water gasses (oxygen, hydrogen)
GOST 8.609-2012 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring of impulse electric and magnetic field strengths with duration of edges up to 20 ps

American Society for Testing and Materials (ASTM), Instruments for the determination of specific rotation

ASTM C729-05 Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM A833-08a(2014) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM C729-11(2022) Standard Test Method for Density of Glass by the Sink-Float Comparator
ASTM D5002-18 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-19 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-18e1 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer
ASTM C204-00 Standard Test Method for Fineness of Hydraulic Cement by Air Permeability Apparatus
ASTM C204-05 Standard Test Method for Fineness of Hydraulic Cement by Air Permeability Apparatus
ASTM C204-11 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM D6531-00(2019) Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
ASTM D2983-22 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D2983-21 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer
ASTM D7454-08 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7454-14 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D7454-14e1 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D8210-19a Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-20 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-18 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-19 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-19b Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM D8210-22 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer
ASTM C490-07 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-09 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-10 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-17 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM D7212-06 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

Society of Automotive Engineers (SAE), Instruments for the determination of specific rotation

SAE ARP4252A-2006 Instrumental Methods of Determining Surface Cleanliness
SAE ARP4252A-2017 Instrumental Methods of Determining Surface Cleanliness
SAE ARP4252-1995 INSTRUMENTAL METHODS OF DETERMINING SURFACE CLEANLINESS

British Standards Institution (BSI), Instruments for the determination of specific rotation

BS ISO 21283:2018 Iron ores. Determination of specific surface area. Test method using air-permeability apparatus (Blaine)
ISO 179-1:2023 Plastics. Determination of Charpy impact properties - Non-instrumented impact test
BS EN ISO 179-2:2020 Plastics. Determination of Charpy impact properties - Instrumented impact test
BS ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity
BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS 7334-7:1992 Measuring instruments for building construction - Methods for determining accuracy in use of instruments when used for setting out
BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
BS 4675-2:1978 Mechanical vibration in rotating machinery - Requirements for instruments for measuring vibration severity
BS 7334-6:1992 Measuring instruments for building construction - Methods for determining accuracy in use of laser instruments
BS 7334-3:1990 Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments
BS IEC 60692:1999 Nuclear instrumentation. Density gauges utilizing ionizing radiation. Definitions and test methods
BS IEC 61336:1996 Nuclear instrumentation. Thickness measurement systems utilizing ionizing radiation. Definitions and test methods
BS EN 13302:2010 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
BS EN 13302:2018*BS 2000-505:2018 Bitumen and bituminous binders - Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus
18/30377401 DC BS EN ISO 179-2. Plastics. Determination of Charpy impact properties. Part 2. Instrumented impact test
BS EN ISO 105-A06:1997 Textiles. Tests for colour fastness. Instrumental determination of 1/1 standard depth of colour
BS ISO 10216:2017 Anodizing of aluminium and its alloys. Instrumental determination of image clarity of anodic oxidation coatings. Instrumental method
BS ISO 10216:2010 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method
21/30426752 DC BS ISO 24477. Vacuum technology. Vacuum gauges. Specifications, calibration and measurement uncertainties for spinning rotor gauges
22/30449754 DC BS EN ISO 179-1. Plastics. Determination of Charpy impact properties. Part 1. Non-instrumented impact test
BS DD ISO/TS 21749:2005 Measurement and uncertainty for metrological applications - Repeated measurements and nested experiments
BS EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Method of traceability for measuring instruments through reference to the international standard instrument
BS 7334-2:1990 Measuring instruments for building construction - Methods for determining accuracy in use: measuring tapes
BS EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
BS IEC 61336:1998 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods
18/30377599 DC BS EN 61034-1 AMD2. Measurement of smoke density of cables burning under defined conditions. Part 1. Test apparatus
BS EN 61262-6:1995 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment.. Determination of the contrast ratio and veiling glare index
BS EN 55016-4-2:2004 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Uncertainty in EMC measurements
BS ISO 9370:1997 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method
BS EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface prof
BS EN ISO 7971-2:2019 Tracked Changes. Cereals. Determination of bulk density, called mass per hectolitre. Method of traceability for measuring instruments through reference to the international standard instrument
BS DD CEN/TS 1071-7:2003 Advanced technical ceramics. Methods of test for ceramic coatings. Determination of hardness and Young's modulus by instrumented indentation testing
BS EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Method for the calibration of ISO surface profile comparators and for the determination of surface prof
BS PD CEN/TR 16013-2:2010 Workplace exposure — Guide for the use of direct-reading instruments for aerosol monitoring Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters

International Electrotechnical Commission (IEC), Instruments for the determination of specific rotation

IEC TR 62461:2015 Radiation protection instrumentation - Determination of uncertainty in measurement
IEC 62089:2001 Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters
IEC 61563:2001 Radiation protection instrumentation - Equipment for measuring specific activity of gamma-emitting radionuclides in foodstuffs
IEC 61874:1998 Nuclear instrumentation - Geophysical borehole instrumentation to determine rock density ("density logging")
IEC 61562:2001 Radiation protection instrumentation - Portable equipment for measuring specific activity of beta-emitting radionuclides in foodstuffs
IEC 61262-6:1994 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6: Determination of the contrast ratio and veiling glare index
CISPR/TR 16-4-1-2009 Specification for radio disturbance and immunity measuring apparatus and methods – Part 4-1: Uncertainties, statistics and limit modelling – Uncertainties in standardized EMC tests

Japanese Industrial Standards Committee (JISC), Instruments for the determination of specific rotation

JIS B 7901:1998 Geodetic instruments -- Levels -- Field procedures for determining accuracy
JIS B 7909:1998 Geodetic instruments -- Theodolites -- Field procedures for determining accuracy
JIS H 8686-2:2013 Anodizing of aluminium and its alloys.Instrumental determination of image clarity of anodic oxidation coatings.Instrumental method

Korean Agency for Technology and Standards (KATS), Instruments for the determination of specific rotation

KS B ISO 2954:2014 Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
KS C IEC 61563-2009(2019) Radiation protection instrumentation－Equipment for measuring specific activity of gamma-emitting radionuclides in foodstuffs
KS M ISO 179-2-2012(2022) Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS M ISO 179-2-2012(2017) Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS B ISO 12857-2-2002(2022) Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part 2：Theodolites
KS B ISO 12857-1-2002(2022) Optics and optical instruments－Geodetic instruments－Field procedures for determining accuracy－Part 1：Levels
KS K ISO 16322-1:2019 Textiles — Determination of spirality after laundering — Part 1: Percentage of wale spirality change in knitted garments
KS M ISO 179-1-2012(2017) Plastics－Determination of Charpy impact properties－Part 1：Non-instrumented impact test
KS M ISO 179-1:2022 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
KS C IEC 61563:2009 Radiation protection instrumentation－Equipment for measuring specific activity of gamma-emitting radionuclides in foodstuffs
KS C IEC 61562-2005(2020) Radiation protection instrumentation－Portable equipment for measuring specific activity of beta-emitting radionuclides in foodstuffs
KS D ISO 10216:2012 Anodizing of aluminium and its alloys-Instrumental determination of image clarity of anodic oxidation coatings-Instrumental method
KS B ISO 8322-8-2002(2022) Building construction－Measuring instruments－Procedures for determining accuracy in use－Part 8：Electronic distance－measuring instruments up to 150 m
KS K ISO 105-A06:2008 Textiles-Tests for colour fastness-Instrumental determination of 1/1 standard depth of colour
KS K ISO 105-A06:2014 Textiles — Tests for colour fastness — Instrumental determination of 1/1 standard depth of colour
KS C IEC 61562:2005 Radiation protection instrumentation－Portable equipment for measuring specific activity of beta-emitting radionuclides in foodstuffs
KS D ISO 10216-2012(2017) Anodizing of aluminium and its alloys－Instrumental determination of image clarity of anodic oxidation coatings－Instrumental method
KS D ISO 10216-2012(2022) Anodizing of aluminium and its alloys－Instrumental determination of image clarity of anodic oxidation coatings－Instrumental method
KS B ISO 8322-8:2002 Building construction－Measuring instruments－Procedures for determining accuracy in use－Part 8：Electronic distance－measuring instruments up to 150 m
KS K ISO 105-A05:2019 Textiles — Tests for colour fastness — Part A05: Instrumental assessment of change in colour for determination of grey scale rating
KS C IEC 60846-1-2014(2019) Radiation protection instrumentation — Ambient and/or directional dose equivalent(rate) meters and/or monitors for beta, X and gamma radiation — Part 1: Portable workplace and environmental meters and
KS C IEC 61034-1:2020 Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus
KS M ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface profile comparators and for the determination of surface
KS F 2437-2019 Standard test method for dynamic modulus of elasticity, dynamic modulus of rigidity and dynamic Poisson’s ratio of concrete specimens by forced resonance apparatus
KS C IEC 61094-8:2017 Electroacoustics — Measurement microphones — Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison
KS C IEC 61094-8-2017(2022) Electroacoustics — Measurement microphones — Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison
KS B ISO 11990-2015(2020) Optics and optical instruments ― Laser and laser-related equipment ― Determination of laser resistance of tracheal tube shafts
KS M ISO 8503-4:2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surf
KS P ISO 17190-9:2011 Urine-absorbing aids for incontinence－Test methods for characterizing polymer-based absorbent materials－Part 9：Gravimetric determination of density
KS C CISPR TR 16-4-1-2012(2017) Specification for radio disturbance and immunity measuring apparatus and methods－Part 4-1：Uncertainties, statistics and limit modelling－Uncertainties in standardized EMC tests
KS B ISO 10360-3:2004 Geometrical Product Specifications(GPS)-Acceptance and reverification tests for coordinate measuring machines(CMM)-Part 3:CMMs with the axis of a rotary table as the fourth axis
KS B ISO 10360-3:2014 Geometrical Product Specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 3: CMMs with the axis of a rotary table as the fourth axis
KS M ISO 8503-4-2012(2017) Preparation of steel substrates before application of paints and related products－Surface roughness characteristics of blast-cleaned steel substrates－Part 4：Method for the calibration of ISO surface p

PL-PKN, Instruments for the determination of specific rotation

PN C04243-1972 Plastics Determination of flexural streng?hby Dynstat apparatus
PN ISO 8322-2:1993 Building construction. Measuring instruments. Procedures for determining accuracy in use. Part 1: Measuring tapes
PN ISO 8322-1:1993 Building construction. Measuring instruments. Procedures for determining accuracy in use Part 1. Theory
PN Z04097 Arkusz 06-1974 Air purity protection Tests for size composition of dust Determination of particie size of dust with the aid of rotary separator
PN-EN ISO 14253-5-2016-01 P Geometrical product specifications (GPS) -- Inspection by measurement of workpieces and measuring equipment -- Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Instruments for the determination of specific rotation

GB/T 6688-1986 Determination of relative strength of dyes(Instrumental method)
GB/T 13824-2015 Mechanical vibration requirements of rotating and reciprocating machines for vibration severity measuring instruments
GB/T 9338-1988 Method of instrumental measurement of whiteness of fluorescent whitening agents
GB/T 6688-2008 Dyestuffs.Determination of relative strength and color difference.Instrumental method
GB/T 9338-2008 Fluorescent whitening agents.Determination of relative whiteness.Instrumental measurement
GB/T 16990-1997 Textiles--Tests for colour fastness--Instrumental determination of 1/1 standard depth of colour
GB/T 42567.3-2023 Reference conditions and procedures for testing industrial and process measurement transmitters—Part 3: Specific procedures for temperature transmitters

SAE - SAE International, Instruments for the determination of specific rotation

SAE ARP4252B-2017 Instrumental Methods of Determining Surface Cleanliness

Professional Standard - Machinery, Instruments for the determination of specific rotation

JB/T 5996-1992 Roundness measurement Assessment of accuracy of three-point measuring method and the measurement instrument used

European Committee for Electrotechnical Standardization（CENELEC）, Instruments for the determination of specific rotation

CLC IEC/TR 62461:2019 Radiation protection instrumentation - Determination of uncertainty in measurement
EN 55016-4-2:2011 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty (Incorporates Amendment A1: 2014)
EN 61262-6:1994 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 6: Determination of the Contrast Ratio and Veiling Glare Index

VN-TCVN, Instruments for the determination of specific rotation

TCVN 6372-1998 Mechamcal vibration of rotating and reciprocating machinery.Requirements for instruments for measuring vibration severity

TR-TSE, Instruments for the determination of specific rotation

TS 2779-1977 Mechanical Vibration Of Eotafing ind Reciprocating Machinery Requirements For Instruments For Measuring Vibration Severity
TS 2216-1976 CLASSIFICAITON OF INSTRUMENTS AND DEVICES FOR MEASUREMENT AND EVALUATION OF THE GEOMETRICAL PARAMETERS OF SURFACE FINISH
TS 2329-1976 GENERAL METHODS OF TEST FOR PIGMENTS PART — XII VISUAL COMPARISON OF HUE OF POWDERED WHITE P?GMENT (HOLLOW CONE METHOD)

International Organization for Standardization (ISO), Instruments for the determination of specific rotation

ISO 2954:1975 Mechanical vibration of rotating and reciprocating machinery; Requirements for instruments for measuring vibration severity
ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity
ISO/FDIS 179-1 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
ISO 8322-4:1991 Building construction — Measuring instruments — Procedures for determining accuracy in use — Part 4: Theodolites
ISO 21283:2018 Iron ores - Determination of specific surface area - Test method using air-permeability apparatus (Blaine)
ISO 8322-6:1991 Building construction; measuring instruments; procedures for determining accuracy in use; part 6: laser instruments
ISO 8322-8:1992 Building construction; measuring instruments; procedures for determining accuracy in use; part 8: electronic distance-measuring instruments up to 150 m
ISO 8322-5:1991 Building construction; measuring instruments; procedures for determining accuracy in use; part 5: optical plumbing instruments
ISO 105-A06:1995 Textiles - Tests for colour fastness - Part A06: Instrumental determination of 1/1 standard depth of colour
ISO 9339-1:1996 Optics and optical instruments - Contact lenses - Determination of the thickness - Part 1: Rigid contact lenses
ISO 1878:1974 Title missing - Legacy paper document
ISO 1878:1983 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
ISO 7971-2:2019 Cereals — Determination of bulk density, called mass per hectolitre — Part 2: Method of traceability for measuring instruments through reference to the international standard instrument
ISO 9339-2:1998 Optics and optical instruments - Contact lenses - Determination of thickness - Part 2: Hydrogel contact lenses
ISO 105-A05:1996/Cor 2:2005 Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating; Technical Corrigendum 2
ISO 17190-9:2001 Urine-absorbing aids for incontinence - Test methods for characterizing polymer-based absorbent materials - Part 9: Gravimetric determination of density
ISO 9339-2:1998/Cor 1:2000 Optics and optical instruments - Contact lenses - Determination of thickness - Part 2: Hydrogel contact lenses; Technical Corrigendum 1
ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
ISO 8503-4:1988 Preparation of steel substrates before application of paints and related products; surface roughness characteristics of blast-cleaned steel substrates; part 4: method for the calibration of ISO surface profile comparators and for the determination of surf
ISO 8322-10:1995 Building construction — Measuring instruments — Procedures for determining accuracy in use — Part 10: Difference between non-glass reflectors and electronic distance-measuring prisms (traditional glas

Indonesia Standards, Instruments for the determination of specific rotation

SNI 05-4533-1998 Instruments for the measurement of surface roughness by the profile method- Contact (stylus) instrumens of progressive profile transformation - Profile recording instrument
SNI ISO 179-1:2011 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test

CZ-CSN, Instruments for the determination of specific rotation

CSN 80 0204-1976 Determination of cotton fíbre length by rneans of meehanical instrumenta
CSN ISO 2954:1994 Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity

Association Francaise de Normalisation, Instruments for the determination of specific rotation

NF EN ISO 179-2:2020 Plastiques - Détermination des caractéristiques au choc Charpy - Partie 2 : essai de choc instrumenté
NF E90-100*NF ISO 2954:2016 Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity
NF T51-035-2/A1:2012 Plastics - Determination of Charpy impact properties - Part 2 : instrumented impact test - Amendment 1 : précision data.
NF EN ISO 105-A06:1997 Textiles - Essais de solidité des teintures - Partie A06 : détermination instrumentale de la profondeur de teinte standard 1/1.
XP X43-043*XP CEN/TS 17021:2018 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
XP X43-321:2018 Qualité de l'air - Émissions de sources fixes - Détermination de la concentration massique d'ammoniac par des techniques instrumentales
XP X43-322:2018 Air quality - Stationary source emission - Determination of the mass concentration of formaldehyde by instrumental techniques
NF G07-010-6*NF EN ISO 105-A06:1997 Textiles. Tests for colour fastness. Part A06 : instrumental determination of 1/1 standard depth of colour.
NF X10-301:1970 MEASUREMENT OF WATER FLOW IN OPEN CHANNELS BY VELOCITY AREA METHODSUSING PROPELLER CURRENT METERS.
XP S31-115-1:2019 Acoustics - Assessment method of measurement uncertainties in environment acoustics - Part 1 : influence of measuring instruments
NF E90-301:1978 Mechanical vibration of large rotating machines with rotational frequencies from 10 S-1 to 200 S-1. Measurement and evaluation of vibration severity in situ.
NF EN 61262-6:1994 Appareils électromédicaux - Caractéristiques des intensificateurs électro-optiques d'image radiologique partie 6 : détermination du rapport de contraste et du voile lumineux
NF C32-073-1:1993 MEASUREMENT OF SMOKE DENSITY OF ELECTRIC CABLES BURNING UNDER DEFINED CONDITIONS. PART 1 : TEST APPARATUS.
NF G07-010-5*NF EN ISO 105-A05:1997 Textiles. Tests for colour fastness. Part A05 : instrumental assessment of change in colour for determination of grey scale rating.
NF C97-338*NF EN 61094-8:2013 Measurement microphones - Part 8 : methods for determining the free-field sensitivity of working standard microphones by comparison
NF T35-503-4*NF EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4 : method for the calibration of ISO surface profile comparators and for the determination of s
NF T35-503-4:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates. Part 4 : method for the calibration of ISO surface profile comparators and for the determination of sur
NF V03-719-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2 : method of traceability for measuring instruments through reference to the international standard instrument.
NF C91-016-4-2*NF EN 55016-4-2:2012 Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2 : uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty
NF ISO 25597:2014 Émissions de sources fixes - Méthode d'essai pour la détermination de la concentration en masse de PM 2,5 et PM 10 dans les gaz émis à la cheminée en utilisant des échantillonneurs cyclone et une dilution d'échantillon
NF EN ISO 7971-2:2019 Céréales - Détermination de la masse volumique, dite masse à l'hectolitre - Partie 2 : méthode de raccordement des instruments de mesure à l'étalon international
NF A03-155-2:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2 : verification and calibration of testing machines.
NF A03-155-3*NF EN ISO 14577-3:2015 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks
NF A03-155-3:2003 Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3 : calibration of reference blocks.
NF E10-201-5*NF EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5 : uncertainty in verification testing of indicating measuring instruments
NF C32-073-1:2000 Common test methods for cables under fire conditions - Measurement of smoke density of cables burning under defined conditions - Part 1 : apparatus.

KR-KS, Instruments for the determination of specific rotation

KS K ISO 16322-1-2019 Textiles — Determination of spirality after laundering — Part 1: Percentage of wale spirality change in knitted garments
KS M ISO 179-1-2022 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
KS K ISO 105-A05-2019 Textiles — Tests for colour fastness — Part A05: Instrumental assessment of change in colour for determination of grey scale rating
KS C IEC 61034-1-2020 Measurement of smoke density of cables burning under defined conditions — Part 1: Test apparatus
KS M ISO 8503-4-2021 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surf
KS C IEC 60034-14-2008(2023) Rotating electrical machines－Part 14：Mechanical vibration of certain machines with shaft heights 56 mm and higher－Measurement, evaluation and limits of vibration severity

Danish Standards Foundation, Instruments for the determination of specific rotation

DS/ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity
DS/EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
DS/ISO/TR 16153:2005 Piston-operated volumetric instruments - Determination of uncertainty for volume measurements made using the photometric method
DS/ISO 10216:2011 Anodizing of aluminium and its alloys - Instrumental determination of image clarity of anodic oxidation coatings - Instrumental method
DS/EN ISO 9396:2000 Plastics - Phenolic resins - Determination af the gel time at a given temperature using automatic apparatus
DS/EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument
DS/ISO 1878:1989 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish
DS/EN ISO 105-A06:1998 Textiles - Tests for colour fastness - Part A06: Instrumental determination of 1/1 standard depth of colour
DS/EN ISO 105-A05:1998 Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating
DS/EN 61262-6:2013 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6: Determination of the contrast ratio and veiling glare index
DS/EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su
DS/EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su

AT-ON, Instruments for the determination of specific rotation

ONORM M 6773-2001 Surface texture of tooth flanks - Roughness parameters, determination of roughness parameters using stylus instruments, measuring instruments and measuring conditions
ONORM M 7535-5-1997 Testing of waste gases of furnace Systems - Measuring equipment for the determination of the combustion temperature of gases - Requirements, testing, marking of conformity

American National Standards Institute （ANSI), Instruments for the determination of specific rotation

BS EN ISO 179-1:2023 Plastics. Determination of Charpy impact properties Non-instrumented impact test (British Standard)
ANSI/ASTM D4591:2001 Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ANSI/ASA S1.15-8-2021 American National Standard Electroacoustics - Measurement microphones - Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison

German Institute for Standardization, Instruments for the determination of specific rotation

DIN EN ISO 179-1:2010-11 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010); German version EN ISO 179-1:2010 / Note: To be replaced by DIN EN ISO 179-1 (2022-05).
DIN ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity (ISO 2954:2012)
DIN ISO 2954:2012-10 Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity (ISO 2954:2012)
DIN 18724:1990 Geodetic instruments; precision of levels and theodolites from technical data
DIN IEC 61336:1999-05 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
DIN 53523-2:1991 Determination of Mooney viscosity of rubber; test apparatus
DIN EN ISO 105-A06:1997 Textiles - Tests for colour fastness - Part A06: Instrumental determination of 1/1 standard depth of colour (ISO 105-A06:1995); German version EN ISO 105-A06:1997
DIN EN ISO 105-A06:1997-07 Textiles - Tests for colour fastness - Part A06: Instrumental determination of 1/1 standard depth of colour (ISO 105-A06:1995); German version EN ISO 105-A06:1997
DIN 12803-2:1981 Laboratory glassware; alcoholometry; alcoholometers for the alcoholic strength by volume
DIN IEC 61336:1999 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
DIN EN ISO 7971-2:2019-06 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2019); German version EN ISO 7971-2:2019
DIN EN ISO 7971-2:2019 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2019)
DIN EN ISO 179-1:2023-10 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2023); German version EN ISO 179-1:2023
DIN EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
DIN EN ISO 14253-5:2016-12 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015); German version EN ISO 14253-5:2015
DIN EN ISO 105-J05:2007-07 Textiles - Tests for colour fastness - Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02) (ISO 105-J05:2007); German version EN ISO 105-J05:2007
DIN 53436-1:1981 Producing thermal decomposition products from materials in an air stream and their toxicological testing; decomposition apparatus and determination of test-temperature
DIN EN ISO 105-A05:1997-07 Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating (ISO 105-A05:1996, including Technical Corrigendum 1:1997); German version EN ISO 105-A05:1997
DIN EN 61262-6:1995-09 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6: Determination of the contrast ratio and veiling glare index (IEC 61262-6:1994); German version EN 61262-6:1994
DIN 33899-3:2014 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers
DIN EN ISO 14253-2:2011 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO 1425
DIN EN 61094-8:2013 Measurement microphones - Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison (IEC 61094-8:2012); German version EN 61094-8:2012 + AC:2013
DIN EN 61034-1:2006 Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus (IEC 61034-1:2005); German version EN 61034-1:2005

未注明发布机构, Instruments for the determination of specific rotation

DIN EN ISO 179-1:2001 Plastics – Determination of Charpy impact properties – Part 1: Non-instrumented impact testing
BS IEC 61336:1996(1999) Nuclear instrumentation — Thickness measurement systems utilizing ionizing radiation — Definitions and test methods
DIN EN ISO 8503-4:1995 Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the DIN determination of surface profile using a stylus instrument
BS 7334-2:1990(1999) Measuring instruments for building construction — Part 2 : Methods for determining accuracy in use : Measuring tapes Copyright
BS EN ISO 9339-1:1998 Optics and optical instruments — Contact lenses — Determination ofthe thickness — Part 1 : Rigid contact lenses
YY 0457.6-2003 Medical electrical equipment. Characteristics of photoelectric X-ray image intensifiers. Part 6: Determination of contrast and glare coefficient

RO-ASRO, Instruments for the determination of specific rotation

STAS 7239-1965
STAS SR ISO 8322-6:1995 Building construction - Measuring instriiments- Procedures for determining sccuracy in use. Part 6: Laser instruments
STAS 10351-1975 PULPS FOR PAPER INDUSTRY Determination of drainage speed with Schopper—Riegler apparatus
STAS 5730/4-1987 Surfaces condition RULES FOR THE MEASURE- MENT OF SURFACE ROUGHNESS USING STYLUS INSTRUMENTS
STAS SR ISO 8322-8:1995 Bullding construction - Measuring instrumenta - Procedures for determining accuracy in use. Part 8: Electronic distance measuring instruments up to 150 m.
STAS SR ISO 8322-7:1995 Building construction - Measuring instruments- Procedures for determining accuracy in use. Part 7: Instruments when use for setting out
STAS SR ISO 8322-5:1995 Building construction - Measuring instrumenta- Procedues for determining accuracy in use. Part 5: Optical plumbing instruments

American Society of Mechanical Engineers (ASME), Instruments for the determination of specific rotation

ASME PTC 19.1-1985 Instruments and apparatus - Part 1: Measurement uncertainty
ASME PTC 19.17-1965 Instruments and apparatus - Part 17: Determination of the viscosity of liquids
ASME PTC 19.16-1965 Instruments and apparatus - Part 16: Density Determinations solids and liquids

BE-NBN, Instruments for the determination of specific rotation

NBN-ISO 8322-7:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 7 : Instruments when used for setting oui
NBN-ISO 8322-8:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 8 : Electronic distance-measuring instruments up to 150 m
NBN-ISO 8322-3:1992 Building construction - Measuring instruments - Procedures for determining accuracy in use -Part 3 : Optical levelling instruments

National Metrological Verification Regulations of the People's Republic of China, Instruments for the determination of specific rotation

JJG(核工) 13-1991 Method for measuring the specific activity of B radioactive solution with 4πβ flow gas proportional counter standard device
JJG(核工) 12-1991 Test method for specific activity of radioactive solution using single-tube liquid scintillation counter standard device

AENOR, Instruments for the determination of specific rotation

UNE-EN ISO 179-2:2000 PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 2: INSTRUMENTED IMPACT TEST (ISO 179-2:1997)
UNE-EN ISO 179-1:2011 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
UNE-EN ISO 105-A06:1998 TEXTILES. TESTS FOR COLOUR FASTNESS. PART A06: INSTRUMENTAL DETERMINATION OF 1/1 STANDARD DEPTH OF COLOUR. (ISO 105-A06:1995).
UNE 40162-4:1975 PRECISION OF THE RESULTS OF THE TEST IN THE "AIR-FLOW" APPARATUS TO DETERMINE AVERAGE DIAMETER OF WOOL FIBRES.
UNE-EN ISO 9396:2001 Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus. (ISO 9396:1997)
UNE-EN ISO 7971-2:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2009)
UNE-EN ISO 179-2:2000/A1:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test - Amendment 1: Precision data (ISO 179-2:1997/Amd 1:2011)
UNE-EN 61094-8:2013 Measurement microphones. Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison
UNE-EN ISO 105-A05:1998 TEXTILES. TESTS FOR COLOUR FASTNESS. PART A05: INSTRUMENTAL ASSESSMENT OF CHANGE IN COLOUR FOR DETERMINATION OF GREY SCALE RATING (ISO 105-A05:1996, INCLUDING TECHNICAL CORRIGENDUM 1:1997).
UNE-EN 61262-6:1996 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 6: DETERMINATION OF THE CONTRAST RATIO AND VEILING GLARE INDEX.
UNE 40162-3:1975 CORRECTION OF ATMOSPHERIC PRESSURE AND TEMPERATURE IN MEASUREMENTS MADE WITH "AIR-FLOW" APPARATUS TO DETEMINE AVERAGE DIAMETER OF WOOL FIBRES.
UNE-EN ISO 105-J05:2008 Textiles - Tests for colour fastness - Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02) (ISO 105-J05:2007)
UNE-EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
UNE-EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Instruments for the determination of specific rotation

GB/T 34790-2017 Inspenction of grain and oils—Determination of water activity of grains—Instrumental method
GB/T 36053-2018 Evaluation of thickness, density and interface width of thin films by X-ray reflectometry—Instrumental requirements, alignment and positioning, data collection, data analysis and reporting

European Committee for Standardization (CEN), Instruments for the determination of specific rotation

PD CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
EN ISO 179-1:2023 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2023)
FprEN ISO 179-1 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO/FDIS 179-1:2023)
EN ISO 9339-1:1998 Optics and Optical Instruments - Contact Lenses - Determination of the Thickness - Part 1: Rigid Contact Lenses ISO 9339-1:1996
EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2009)
EN ISO 105-A06:1997 Textiles - Tests for Colour Fastness - Part A06: Instrumental Determination of 1/1 Standard Depth of Colour ISO 105-A06: 1995
EN ISO 9339-2:1998 Optics and Optical Instruments - Contact Lenses - Determination of Thickness - Part 2: Hydrogel Contact Lenses ISO 9339-2:1998
EN ISO 8503-4:1995 Preparation of Steel Substrates Before Application of Paints and Related Products - Surface Roughness Characteristics of Blast -Cleaned Steel Substrates - Part 4: Method for the Calibration of ISO Surface Profile Comparators and for the Determination of
EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
EN 13205-5:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015)
PD CEN/TS 1071-7:2003 Advanced technical ceramics Methods of test for ceramic coatings Part 7: Determination of hardness and Young磗 modulus by instrumented indentation testing

Lithuanian Standards Office , Instruments for the determination of specific rotation

LST EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
LST EN ISO 105-A06:2000 Textiles - Tests for colour fastness - Part A06: Instrumental determination of 1/1 standard depth of colour (ISO 105-A06:1995)
LST EN ISO 9396:2001 Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus (ISO 9396:1997)
LST EN ISO 7971-2:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2009)
LST EN ISO 179-2:2000/A1:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test - Amendment 1: Precision data (ISO 179-2:1997/Amd.1:2011)
LST EN ISO 105-A05:2000 Textiles - Tests for colour fastness - Part A05: Instrumental assessment of change in colour for determination of grey scale rating (ISO 105-A05:1996, including Technical Corrigendum 1:1997)
LST EN 61262-6-2001 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 6: Determination of the contrast ratio and veiling glare index (IEC 61262-6:1994)
LST EN ISO 105-J05:2007 Textiles - Tests for colour fastness - Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCONO2) (ISO 105-J05:2007)
LST EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of su
LST EN ISO 8503-3:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su

SE-SIS, Instruments for the determination of specific rotation

SIS SS 11 03 40-1983 Hardness test - Vickers test HV 0,2 to HV100- Direct verification of testing machines
SIS SS-ISO 8503-4:1992 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast- cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for

The American Road & Transportation Builders Association, Instruments for the determination of specific rotation

AASHTO TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument
AASHTO T 153-2007 Standard Method of Test for Fineness of Hydraulic Cement by Air Permeability Apparatus
AASHTO M 210-2010 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210-2011 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210-2012 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210M/M 210-2014 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO R 70-2016 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO T 153-2002 Standard Method of Test for Fineness of Hydraulic Cement by Air Permeability Apparatus HM-22; Part IIA; ASTM Designation: C 204-00

Standard Association of Australia （SAA）, Instruments for the determination of specific rotation

AS 2001.4.A05:2004 Method of test for textiles - Colourfastness tests - Instrumental assessment of the change in colour for determination of grey scale rating
AS 1289.5.8.8:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using proportion of water
AS 1289.5.8.9:1998 Methods of testing soils for engineering purposes - Soil compaction and density tests - Nuclear surface moisture-density gauges - Water content of a standard moisture block using comparison against primary blocks

ZA-SANS, Instruments for the determination of specific rotation

SANS 61034-1:2006 Measurement of smoke density of cables burning under defined conditions Part 1: Test apparatus

CEN - European Committee for Standardization, Instruments for the determination of specific rotation

EN ISO 7971-2:2019 Cereals - Determination of bulk density@ called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument

AASHTO - American Association of State Highway and Transportation Officials, Instruments for the determination of specific rotation

TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument (Revision 1)
M 210-2009 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210M/M 210-2014 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2010 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2006 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2011 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2012 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
R 70M/R 70-2018 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
R 70-2016 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2003 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete (ASTM Designation C 490-00a)

HU-MSZT, Instruments for the determination of specific rotation

MSZ 11029/18-1984

ES-AENOR, Instruments for the determination of specific rotation

UNE 20-180-1986

ES-UNE, Instruments for the determination of specific rotation

UNE-EN ISO 7971-2:2019 Cereals - Determination of bulk density, called mass per hectolitre - Part 2: Method of traceability for measuring instruments through reference to the international standard instrument (ISO 7971-2:2019)
UNE-EN ISO 14253-5:2015 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) (Endorsed by AENOR in November of 2015.)

NL-NEN, Instruments for the determination of specific rotation

NEN 11034-1-1993 Insulated electric cables.Measurement of smoke density when burned under defined conditions.Part 1:Test apparatus(IEC 1034-1:1990)
NVN 2824-1994 Air quality.Ambient air.Determination of the concentration of nitric acid,hydrochloric acid,ammonia and sulphur dioxide as gases.Rotating denuder method

SG-SPRING SG, Instruments for the determination of specific rotation

SS 373 Pt.5-1994 Specification for optics and optical instruments - contact lenses Part 5: Determination of thickness of rigid contact lenses

Acoustical Society of America (ASA), Instruments for the determination of specific rotation

ASA S1.15 PART 8-2021 American National Standard Electroacoustics - Measurement microphones - Part 8: Methods for determining the free-field sensitivity of working standard microphones by comparison

Professional Standard - Medicine, Instruments for the determination of specific rotation

YY/T 0457.6-2003 Medical electrical equipment-Characteristics of electro-optical X-ray image intensifiers-Part 6:Determination of the contrast ratio and veiling glare index

国家市场监督管理总局、中国国家标准化管理委员会, Instruments for the determination of specific rotation

GB/T 18779.5-2020 Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 5: Uncertainty in verification testing of indicating measuring instruments

CENELEC - European Committee for Electrotechnical Standardization, Instruments for the determination of specific rotation

EN 55016-4-2:2004 Specification for radio disturbance and immunity measuring apparatus and methods Part 4-2: Uncertainties@ statistics and limit modelling Uncertainty in EMC measurements
EN 50268-1:1999 Common Test Methods for Cables under Fire Conditions - Measurement of Smoke Density of Cables Burning under Defined Conditions - Part 1: Apparatus

NZ-SNZ, Instruments for the determination of specific rotation

NZS 4402.6.3.1:1986 Methods of Testing Soils for Civil Engineering Purposes Part 6.3: Soil Strength Tests - Determination of the Unconfined Compressive Strength of Cohesive Soil Test 6.3.1: Standard Method Using Laboratory Apparatus

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, Instruments for the determination of specific rotation

ITU-T P.65-1993 Objective Instrumentation for the Determination of Loudness Ratings - Telephone Transmission Quality Objective Electro-Acoustical Measurements (Study Group XII) 8 pp