ZH
RU
ES

3. Results and Analysis

3. Results and Analysis, Total:338 items.

In the international standard classification, 3. Results and Analysis involves: Aircraft and space vehicles in general, Water quality, Coals, Fuels, Particle size analysis. Sieving, Analytical chemistry, Products of the chemical industry, Laboratory medicine, Non-ferrous metals, Nuclear energy engineering, Quality, Protection against crime, Plastics, Tobacco, tobacco products and related equipment, Beverages, Fibre optic communications, Equipment for petroleum and natural gas industries, Character sets and information coding, Structures of buildings, Vocabularies, Metrology and measurement in general, Petroleum products in general, Radiation measurements, Graphical symbols, Environmental protection, Ferrous metals, Industrial automation systems, Lubricants, industrial oils and related products, Astronomy. Geodesy. Geography, Test conditions and procedures in general, Testing of metals, General methods of tests and analysis for food products, Air quality, Microbiology, Fertilizers, Insulating materials, Non-destructive testing, Products of the textile industry, Electrical engineering in general, Insulating fluids, Electricity. Magnetism. Electrical and magnetic measurements, Transformers. Reactors, Acoustics and acoustic measurements, Textile fibres, Road engineering.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, 3. Results and Analysis

GB/T 32454-2015 Flight evaluation of launch vehicle
GB/T 15445-1995 Graphical representation of results of particle size analysis
GB/T 42462-2023 Guidelines for Confirmation of Chromatographic Analysis Results of Cosmetics
GB 15445-1995 Graphical representation of particle size analysis results
GB/T 15445.1-2008 Representation of results of particle size analysis.Part 1:Graphical representation
GB/Z 27426-2022 Guidance on monitoring validity of the results for chemical analysis laboratory
GB/T 15445.4-2006 Representation of results of particle size analysis - Part 4: Characterization of a classification process
GB/T 6379.1-2004 Accuracy(trueness and precision)of measurement methods and results Part 1:General principles and definitions
GB/T 15445.5-2011 Representation of results of particle size analysis.Part 5:Methods of calculations relating to particle size analyses using logarithmic normal probability distribution
GB/T 15445.2-2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distibutions
GB/T 6379.6-2009 Accuracy(trueness and precision)of measurement methods and results.Part 6:Use in practice of accuracy values
GB/T 2910.8-2009 Textiles.Quantitative chemical analysis.Part 8:Mixtures of acetate and triacetate fibres(method using acetone)
GB/T 2910.9-2009 Textiles.Quantitative chemical analysis.Part 9:Mixtures of acetate and triacetate fibres(method using benzyl alcohol)
GB/T 6379.3-2012 Accuracy(trueness and precision) of measurement methods and results.Part 3:Intermediate measures of the precision of a standard measurement method
GB/T 6379.2-2004 Accuracy(trueness and precision)of measurement methods and results-Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method
GB/T 21223-2007 Guide for the statistical analysis of ageing test data.Methods based on mean values of normalement diatributed test results

AT-ON, 3. Results and Analysis

ONORM M 6247-2001 Water analysis - Expression of results in waste waste water analysis
ONORM M 6246-1996 Water analysis - Expression of results in drinking water analysis
ONORM S 7001-1983 Testing of leather; volume of Chemical analysis and presenta- tion of results
OENORM EN 15522-2-2021 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses

RO-ASRO, 3. Results and Analysis

STAS 398-1992 Solid fues. Symbole relating to the analytical characteristics and factors for the recalculation of analysis results
STAS 12689-1988 Analysis techniques for system reliability PROCEDURE FOR FAILURE MODE AND EFFECTS ANALYSIS
STAS ISO 3406:1992 Tobacco and tobacco products. Expression of analytical test results

Professional Standard - Aerospace, 3. Results and Analysis

QJ 2119-1991 Application and Analysis of Transponder and Supersonic Wind Tunnel Missile Force Test Results
QJ 3291-2007 Ground (ship) air missile flight test requirements and result analysis and evaluation
QJ 2435.2-1993 Analysis of flight test results of ground (ship) to air missile and evaluation of state of independent loop missile
QJ 2435.3-1993 Analysis of flight test results of surface (ship) to air missile and evaluation of closed loop missile state
QJ 2712.1-1995 Analysis and Evaluation of Ground-to-Surface Ballistic Missile Flight Test Result and Developmental Flight Test
QJ 2712.2-1995 Analysis and Evaluation of Flight Test Result of Surface-to-Surface Ballistic Missile Type Qualification Flight Test
QJ 2712.3-1995 Analysis and Evaluation of Ground-to-Surface Ballistic Missile Flight Test Results Sampling Flight Test for Batch Production
QJ 1425-1988 Analysis of flight test results of liquid rocket power system
QJ 2263-1992 Analysis Method of Flight Test Result of Surface-to-Air Missile Guidance and Control System
QJ 1385A-2006 Analysis Method of Warhead Flight Mechanics Results of Surface-to-Surface Missile Flight Test
QJ 1385-1988 Analysis Method of Warhead Flight Mechanics Results of Surface-to-Surface Missile Flight Test

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, 3. Results and Analysis

GB/T 35985-2018 Calculation of analyses to different bases for coal
GB/T 15445.6-2014 Representation of results of particle size analysis—Part 6: Descriptive and quantitative representation of particle shape and morphology
GB/T 2910.25-2017 Textiles—Quantitative chemical analysis—Part 25：Mixtures of polyester and certain other fibres（method using trichloroacetic acid and chloroform）
GB/T 35656-2017 Guideline for verification and validation of chemical analysis method and internal quality control—Method on reporting qualitative test reports

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., 3. Results and Analysis

ASHRAE BN-97-1-3-1997 Simulation Results and Analysis of Eight Ventilation Control Strategies in VAV Systems
ASHRAE 3781-1994 Simulation and Performance Analysis of Triple-Effect Absorption Cycles
ASHRAE 4714-2004 Domestic Hot Water End Use Analysis Methods and Preliminary Results (RP-1172)
ASHRAE LV-11-007-2011 Hot-Water Distribution System Piping Heat Loss Factors—Phase III: Test Results
ASHRAE SF-98-27-3-1998 Analytical Model for Hot-Gas Defrosting of a Cylindrical Coil Cooler: Part II - Model Results and Conclusions
ASHRAE HI-02-11-2-2002 Early Dection of Insulation Breakdown in Low-Voltage Motors@ Part II: Analysis Results (RP-1078)
ASHRAE LV-11-008-2011 Hot-Water Distribution System Piping Time@ Water@ and Energy Waste—Phase III: Test Results
ASHRAE MN-00-5-3-2000 Comparative Analysis of Life-Cycle Costs of Geothermal Heat Pumps and Three Conventional HVAC Systems

Standard Association of Australia （SAA）, 3. Results and Analysis

AS 1038.16:2005 Coal and coke - Analysis and testing - Assessment and reporting of results
AS 4932.1:2001 Representation of results of particle size analysis - Graphical representation
ISO 9276-1:1998/Cor.1:2004 Representation of results of particle size analysis — Part 1: Graphical representation TECHNICAL CORRIGENDUM 1

BE-NBN, 3. Results and Analysis

American Society for Testing and Materials (ASTM), 3. Results and Analysis

ASTM D596-01(2018) Standard Guide for Reporting Results of Analysis of Water
ASTM D596-91(1995) Standard Guide for Reporting Results of Analysis of Water
ASTM D596-01 Standard Guide for Reporting Results of Analysis of Water
ASTM D596-01(2006) Standard Guide for Reporting Results of Analysis of Water
ASTM D596-01(2011) Standard Guide for Reporting Results of Analysis of Water
ASTM D6956-17 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
ASTM D6956-03 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
ASTM E1950-98 Standard Practice for Reporting Results from Methods of Chemical Analysis
ASTM D5754-95(2000) Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements-Trilinear Diagrams for Two or More Analyses
ASTM D5754-95(2006) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace ElementsTrilinear Diagrams for Two or More Analyses
ASTM D6956-11 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
ASTM E853-01 Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Results, E706(IA)
ASTM E853-87(1995)e1 Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Results, E706(IA)
ASTM E1950-10 Standard Practice for Reporting Results from Methods of Chemical Analysis
ASTM E1950-17 Standard Practice for Reporting Results from Methods of Chemical Analysis
ASTM D6543-14 Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers
ASTM D7372-21 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
ASTM D6543-20e1 Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers
ASTM D933-84(1999) Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
ASTM D933-84(2007) Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
ASTM D7372-07 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
ASTM E853-01(2008) Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Results, E706(IA)
ASTM D933-84(2003) Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
ASTM D7372-12 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
ASTM D7372-17 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
ASTM D933-20 Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
ASTM E1323-89(2002) Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM E1950-98(2003) Standard Practice for Reporting Results from Methods of Chemical Analysis
ASTM E1323-15 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM D933-84(2012) Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
ASTM E853-13 Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Results
ASTM E1006-21 Standard Practice for Analysis and Interpretation of Physics Dosimetry Results from Test Reactor Experiments
ASTM D5738-95(2006) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace ElementsDiagrams for Single Analyses
ASTM D4025-97 Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
ASTM D4025-97(2003) Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
ASTM D4025-08 Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
ASTM E1006-96 Standard Practice for Analysis and Interpretation of Physics Dosimetry Results for Test Reactors, E 706(II)
ASTM D7874-13 Standard Guide for Applying Failure Mode and Effect Analysis lpar;FMEArpar; to In-Service Lubricant Testing
ASTM D5738-95(2000) Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements-Diagrams for Single Analyses
ASTM D7235-10 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM E1323-89(1994)e1 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM E1323-15(2020) Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM E1763-06 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
ASTM D4025-08a Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
ASTM E1323-09 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ASTM D5877-95(2000) Standard Guide for Displaying Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements-Diagrams Based on Data Analytical Calculations
ASTM E1763-98 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
ASTM E1763-98(2003) Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
ASTM E853-18 Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Neutron Exposure Results
ASTM E853-23 Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Neutron Exposure Results
ASTM D3180-89(2002) Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
ASTM D4025-18 Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
ASTM D4025-08a(2013) Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection
ASTM D5877-95(2005) Standard Guide for Displaying Results of Chemical Analyses of Groundwater for Major Ions and Trace ElementsDiagrams Based on Data Analytical Calculations
ASTM E3016-18 Standard Guide for Establishing Confidence in Digital and Multimedia Evidence Forensic Results by Error Mitigation Analysis
ASTM E3016-15e1 Standard Guide for Establishing Confidence in Digital Forensic Results by Error Mitigation Analysis
ASTM E1006-13 Standard Practice for Analysis and Interpretation of Physics Dosimetry Results from Test Reactor Experiments
ASTM E1006-02 Standard Practice for Analysis and Interpretation of Physics Dosimetry Results for Test Reactors, E 706(II)
ASTM E1006-08 Standard Practice for Analysis and Interpretation of Physics Dosimetry Results for Test Reactors, E 706(II)
ASTM D6036-96(2014) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Use of Maps

British Standards Institution (BSI), 3. Results and Analysis

BS ISO 9276-1:1998 Representation of results of particle size analysis. Graphical representation
BS ISO 1170:2013 Coal and coke. Calculation of analyses to different bases
BS ISO 9276-4:2001+A1:2017 Representation of results of particle size analysis - Characterization of a classification process
BS ISO 12787:2012 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
BS ISO 12787:2011 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
BS ISO 9276-4:2002 Representation of results of particle size analysis - Characterization of a classification process
PD ISO/TR 27877:2021 Statistical analysis for evaluating the precision of binary measurement methods and their results
BS ISO 9276-3:2008 Representation of results of particle size analysis - Adjustment of an experimental curve to a reference model
BS ISO 9276-5:2005 Representation of results of particle size analysis - Methods of calculation relating to particle size analyses using logarithmic normal probability distribution
BS EN ISO 16993:2015 Solid biofuels. Conversion of analytical results from one basis to another
BS EN 15296:2011 Solid biofuels. Conversion of analytical results from one basis to another
BS ISO 9276-2:2001 Representation of results of particle size analysis - Calculation of average particle sizes/diameters and moments from particle size distributions
BS ISO 9276-2:2014 Representation of results of particle size analysis. Calculation of average particle sizes/diameters and moments from particle size distributions
PD ISO/TR 6030:2022 Smart community infrastructures. Disaster risk reduction. Survey results and gap analysis
BS IEC 61636-1:2021 Software Interface for Maintenance Information Collection and Analysis (SIMICA). Exchanging Test Results and Session Information via the eXtensible Markup Language (XML)
BS PD CEN/TR 15522-2:2006 Oil spill identification — Waterborne petroleum and petroleum products — Part 2: Analytical methodology and interpretation of results
BS ISO 9276-6:2008 Representation of results of particle size analysis - Descriptive and quantitative representation of particle shape and morphology
BS 7826-1:1995 Guide for the statistical analysis of ageing test data. Methods based on mean values of normally distributed test results
BS IEC 60493-1:2011 Guide for the statistical analysis of ageing test data. Methods based on mean values of normally distributed test results
BS EN 15522-2:2023 Tracked Changes. Oil spill identification. Petroleum and petroleum related products. Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses
BS EN ISO 16993:2016 Tracked Changes. Solid biofuels. Conversion of analytical results from one basis to another
21/30425149 DC BS EN 15522-2. Oil spill identification. Waterborne petroleum and petroleum products. Part 2. Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses
BS 5377-2:1990 Assessment of laundering effects by means of a cotton control cloth. Methods of analysis and test for the unsoiled cotton control cloth
PD ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results. Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
BS ISO 22753:2021 Molecular biomarker analysis. Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains. General requirements
BS EN ISO 22753:2022 Molecular biomarker analysis. Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains. General requirements

IX-FAO, 3. Results and Analysis

CAC/GL 70-2009(En) Dispute Resolution Guidelines for Analytical Results

PL-PKN, 3. Results and Analysis

PN P04870-1990 Textiles Statistical analysis of testing results
PN-ISO 9276-1-2001/AC1-2021-10 P Representation of results of particle size analysis -- Part 1: Graphical representation

Professional Standard - Agriculture, 3. Results and Analysis

水产品质量安全检验手册 2.1.3.0-2005 Chapter 2 Basic Analysis Methods for Physical and Chemical Testing of Aquatic Products 1st Quality Sensory Analysis Methods for Aquatic Products (GB 10220-1988) 3. Results Analysis

National Metrological Technical Specifications of the People's Republic of China, 3. Results and Analysis

JJF 1054-1996 Evaluation Specification for Analysis Result of Inorganic Composition in Serum

Association Francaise de Normalisation, 3. Results and Analysis

NF A06-001:1979 Analysis of light metals by spectrography. Processing of test results. Statistical interpretation.
NF V37-014:1983 TOBACCO AND TOBACCO PRODUCTS. EXPRESSION OF ANALYTICAL TEST RESULTS.
NF U42-160:2016 Matières fertilisantes et supports de culture - Analyses microbiologiques - Échantillonnage et grille de lecture des résultats
NF T75-612*NF ISO 12787:2012 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
NF ISO 12787:2012 Cosmétiques - Méthodes analytiques - Critères de validation pour les résultats analytiques utilisant des techniques chromatographiques
NF X11-632-1*NF ISO 9276-1:1998 Representation of results of particle size analysis. Part 1 : graphical representation.
NF X11-632:1990 SIZE DETERMINATION. EXPRESSION FO RESULTS OF SIZE DETERMINATION.
NF T51-199:1974 Plastics : statistical analysis of experimental results. Henry test.
NF X11-632-4*NF ISO 9276-4:2001 Representation of results of particle size analysis - Part 4 : characterization of a classification process
FD T90-465-2:2019 Water quality - Protocol for the estimation of the uncertainty of measurement associated with an analysis result for microbiological enumeration methods - Part 2 : technical enumeration
NF X34-116:2011 Solid biofuels - Conversion of analytical results from one basis to another.
NF X34-116*NF EN ISO 16993:2016 Solid biofuels - Conversion of analytical results from one basis to another
NF EN ISO 16993:2016 Biocombustibles solides - Conversion de résultats analytiques d'une base en une autre base
NF U42-160:2010 Organic and organo-mineral fertilizers - Microbiological analysis - Sampling and reading grid of results.
FD T90-465-1:2014 Water quality - Protocol for the estimation of the uncertainty of measurement associated with an analysis result for microbiological enumeration methods - Part 1 : references, definition and general principles
NF EN 15522-2:2023 Identification des pollutions pétrolières - Pétrole et produits pétroliers - Partie 2 : méthode d'analyse et interprétation des résultats sur la base des analyses par CPG DIF et CPG-SM faible résolution
NF U44-169:2010 Organic soil improvisers and growing media - Microbiological analysis - Sampling and reading grid of results.
NF X11-632-4/A1*NF ISO 9276-4/A1:2018 Representation of results of particle size analysis - Part 4 : Characterization of a classification process - Amendment 1 : Additional explanations and minor corrections
NF C27-239/A1:2007 Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis.
NF G06-006-9:2010 Textiles - Quantitative chemical analysis - Part 9 : mixtures of acetate and triacetate fibres (method using benzyl alcohol).
NF X11-632-2:2001 Representation of results of particle size analysis - Part 2 : calculation of average particle sizes/diameters and moments from particle size distributions.

NL-NEN, 3. Results and Analysis

NEN 6583-1987 Rainwater - Report of results of chemical analysis of wet deposition
NPR 6598-1992 Water. Rounding of analytical results

TR-TSE, 3. Results and Analysis

TS 1999-1975 CALCULATION OF COAL AND ?OKE ANALYSES TO DIFFERENT BASES

ES-AENOR, 3. Results and Analysis

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, 3. Results and Analysis

GJB 5409-2005 General specification for the canister supporting and missile loading vehicle of cruise missile

International Organization for Standardization (ISO), 3. Results and Analysis

ISO 1170:1977 Coal and coke; Calculation of analyses to different bases
ISO 3406:1975 Tobacco and tobacco products; Expression of analytical test results
ISO 12787:2011 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
ISO 13424:2013 Surface chemical analysis — X-ray photoelectron spectroscopy — Reporting of results of thin-film analysis
ISO 9276-1:1990 Representation of results of particle size analysis; part 1: graphical representation
ISO 9276-4:2001 Representation of results of particle size analysis - Part 4: Characterization of a classification process
ISO/TR 7242:1981 Chemical analysis of light metals and their alloys; Statistical interpretation of inter-laboratory trials
ISO/TR 27877:2021 Statistical analysis for evaluating the precision of binary measurement methods and their results
ISO 9276-1:1998/cor 1:2004 Representation of results of particle size analysis - Part 1: Graphical representation; Technical Corrigendum 1
ISO 16993:2016 Solid biofuels - Conversion of analytical results from one basis to another
ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
ISO 9276-3:2008 Representation of results of particle size analysis - Part 3: Adjustment of an experimental curve to a reference model
ISO 16993:2015 Solid biofuels — Conversion of analytical results from one basis to another
ISO 9276-5:2005 Representation of results of particle size analysis - Part 5: Methods of calculation relating to particle size analyses using logarithmic normal probability distribution
ISO/TR 6030:2022 Smart community infrastructures – Disaster risk reduction – Survey results and gap analysis
ISO 9276-2:2001 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 9276-2:2014 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values
ISO 9276-6:2008 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology
ISO 22753:2021 Molecular biomarker analysis — Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains — General requirements
ISO 9276-4:2001/Amd 1:2017 Representation of results of particle size analysis - Part 4: Characterization of a classification process - Amendment 1: Additional explanations and minor corrections
ISO 5725-3:1994 Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method
ISO/DIS 13473-4 Characterization of pavement texture by use of surface profiles — Part 4: One third octave band spectral analysis of surface profiles
ISO 13473-2:2002 Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis
ISO 5725-6:1994/cor 1:2001 Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values; Technical Corrigendum 1
ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results

Military Standard of the People's Republic of China-General Armament Department, 3. Results and Analysis

GJB 6676.1-2009 Analysis and evaluation of flight test result on submarine-to-ground strategic missile.Part 1:Development flight test
GJB 6676.3-2009 Analysis and evaluation of flight test result on submarine-to-ground strategic missile.Part 3:sampling flight test in lot production
GJB 6676.2-2009 Analysis and evaluation of flight test result on submarine-to-ground strategic missile.Part 2：Approval evaluation flight test
GJB 9624-2019 Rapid analysis and evaluation method for space launch flight results
GJB 6761-2009 Compiling requirement for result analysis reports of ground-to-ground missile flight test

Danish Standards Foundation, 3. Results and Analysis

DS/ISO 12787:2012 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
DS/ISO/TR 27877:2021 Statistical analysis for evaluating the precision of binary measurement methods and their results
DS/ISO 2602:1981 Statistical interpretation of test results. Estimation of the mean. Confidence interval
DS/EN 15296:2011 Solid biofuels - Conversion of analytical results from one basis to another
DS/ISO 22753:2021 Molecular biomarker analysis – Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains – General requirements
DS 927:1955 Textile testing. Sampling, standard atmosphere for testing and statistical interpretation of the test results
DS/CEN/TR 15522-2:2013 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses
DS/IEC 60493-1:2012 Guide for the statistical analysis of ageing test data - Part 1: Methods based on mean values of normally distributed test results
DS/ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results

Korean Agency for Technology and Standards (KATS), 3. Results and Analysis

KS M ISO 12787:2014 Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques
KS M ISO 12787-2014(2019) Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques
KS A ISO 9276-1:2003 Representation of results of particle size analysis-Part 1:Graphical representation
KS A ISO 9276-1:2014 Representation of results of particle size analysis — Part 1: Graphical representation
KS A ISO 9276-1-2014(2019) Representation of results of particle size analysis — Part 1: Graphical representation
KS D ISO 7242:2006 Chemical analysis of light metals and their alloys－Statistical interpretation of inter-laboratory trials
KS C IEC 61745:2001 End－face image analysis procedure for the calibration of optical fibre geometry test setsthe calibration of optical fibre geometry test sets
KS A ISO 9276-2-2014(2019) Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS C IEC 60493-1:2019 Guide for the statistical analysis of ageing test data — Part 1:Methods based on mean values of normally distributed test results
KS Q ISO 22971-2012(2022) Accuracy (trueness and precision) of measurement methods and results－Practical guidance for the use of ISO 5725－2:1994 in designing, implementing and statistically analysing interlaboratory repeatabil
KS A ISO 9276-2:2003 Representation of results of particle size analysis-Part 2:Calculation of average particle sizes/diameters and moments from particle size distributions
KS A ISO 9276-2:2014 Representation of results of particle size analysis — Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions
KS C IEC 60493-1:2002 Guide for the statistical analysis of ageing test data－Part 1：Methods based on mean values of normally distributed test results
KS Q ISO 22971:2012 Accuracy (trueness and precision) of measurement methods and results－Practical guidance for the use of ISO 5725－2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and eproducibility results

AENOR, 3. Results and Analysis

UNE 7060-1:1997 REPRESENTATION OF RESULTS OF PARTICLE SIZE ANALYSIS. PART 1: GRAPHICAL REPRESENTATION.

German Institute for Standardization, 3. Results and Analysis

DIN ISO 9276-1:2004 Representation of results of particle size analysis - Part 1: Graphical representation (ISO 9276-1:1998)
DIN ISO 9276-1:2004-09 Representation of results of particle size analysis - Part 1: Graphical representation (ISO 9276-1:1998)
DIN ISO 9276-4:2019-09 Representation of results of particle size analysis - Part 4: Characterization of a classification process (ISO 9276-4:2001 + Amd.1:2017)
DIN 4113-1:1980 Aluminium constructions under predominantly static loading; static analysis and structural design
DIN ISO 9276-4:2006 Representation of results of particle size analysis - Part 4: Characterization of a classification process (ISO 9276-4:2001);English version of DIN ISO 9276-4:2006-02
DIN ISO 9276-4:2019 Representation of results of particle size analysis - Part 4: Characterization of a classification process (ISO 9276-4:2001 + Amd.1:2017)
DIN EN 1911-3:1998 Stationary source emissions - Manual method of determination of HCl - Part 3: Absorption solutions analysis and calculation; German version EN 1911-3:1998
DIN EN 15296:2011 Solid biofuels - Conversion of analytical results from one basis to another; German version EN 15296:2011
DIN ISO 9276-2:2018-09 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN 4113-1/A1:2002 Aluminium constructions under predominantly static loading - Part 1: Static analysis and structural design; Amendment A1
DIN 32632:2019-12 Chemical analysis - Guide to quantification of uncertainty in measurement of quantitative test results - Terms and strategies
DIN EN ISO 16993:2016-11 Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2016); German version EN ISO 16993:2016
DIN EN 15522-2:2022 Oil spill identification - Petroleum and Petroleum related products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-low resolution-MS analyses; German and English version prEN 15522-2:2022
DIN EN 15522-2:2021 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses; German and English version prEN 15522-2:2020
DIN EN 15522-2:2023-07 Oil spill identification - Petroleum and petroleum related products - Part 2: Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses; German version EN 15522-2:2023
DIN ISO 9276-6:2012-01 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology (ISO 9276-6:2008)
DIN ISO 9276-6:2012 Representation of results of particle size analysis - Part 6: Descriptive and quantitative representation of particle shape and morphology (ISO 9276-6:2008)
DIN 32632-1:2013 Chemical analysis - Guide to quantification of uncertainty in measurement of quantitative test results - Part 1: Terms and strategies
DIN EN ISO 16993:2015 Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2015); German version EN ISO 16993:2015
DIN 38402-1:1987 German standard methods for the examination of water, waste water and sludge; general information (group A); recording of analysis results (A 1)
DIN EN ISO 16993:2016 Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2016); German version EN ISO 16993:2016
DIN 38402-1:2011-09 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 1: Recording of analysis results (A 1)
DIN ISO 9276-2:2018 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2014)
DIN ISO 9276-2:2006 Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions (ISO 9276-2:2001);English version of DIN ISO 9276-2:2006-02
DIN EN 60599:2008 Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis (IEC 60599:1999 + A1:2007); German version EN 60599:1999 + A1:2007
DIN 38402-71:2020-10 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 71: Equivalence of two analysis methods based on the comparison of analysis results (A 71)
DIN 38402-1:2011 German standard methods for the examination of water, waste water and sludge - General information (group A) - Part 1: Recording of analysis results (A 1)
DIN ISO 13473-2:2004 Characterization of pavement texture by use of surface profiles - Part 2: Terminology and basic requirements related to pavement texture profile analysis (ISO 13473-2:2002)

未注明发布机构, 3. Results and Analysis

BS ISO 9276-1:1998(2006) Representation of results of particle size analysis — Part 1 : Graphical representation
BS 1016-100:1994(1999) Methods for Analysis and testing of coal and coke — Part 100 : General introduction and methods for reporting results

API - American Petroleum Institute, 3. Results and Analysis

API RP 2SK-2005 Design and Analysis of Stationkeeping Systems for Floating Structures (Third Edition; Incorporates Addendum: May 2008)
API PUBL 45811-1993 Evaluation Technologies for the Treatment of Petroleum Project Marketing Terminal Wastewater (Publication 4581) Appendices: Analytical Results and Bioassay Results
API PUBL 4360 VOL I-1982 Atmospheric Dispersion over Water and in the Shoreline Transition Zone; Volume I: Analysis and Results
API RP 2SK-1995 Recommended Practice for Design and Analysis of Stationkeeping Systems for Floating Structures First Edition

国家市场监督管理总局、中国国家标准化管理委员会, 3. Results and Analysis

GB/T 36401-2018 Surface chemical analysis—X-ray photoelectron spectroscopy—Reporting of results of thin-film analysis
GB/T 38677-2020 Gas analysis—Measurement procedure and result—Technical requirements for calibration

Professional Standard - Public Safety Standards, 3. Results and Analysis

GA/T 1163-2014 Analysis and application of human DNA fluorescent STR typing results
GA/T 2000.150-2015 Information codes for public security industry.Part 150:Classification and codes for results of policing evaluation
GA/T 974.29-2011 Codes for the fire information. Part 29: Classification and codes for response to fire alarm
GA/T 2000.142-2016 Public Security Information Code Part 142: Classification and Codes of Punishment Results for Violations of Laws and Disciplines
GA/T 2000.59-2015 Information codes for public security industry.Part 59:Classification and codes for investigation results in stage of filing criminal cases

Professional Standard - China Metal Association, 3. Results and Analysis

CSM 01 01 01 00-2006 Guidelines for the Uncertainty Assessment of Measurement Results of Chemical Composition Analysis
CSM 01　01　01　00-2006 Guidelines for the Uncertainty Assessment of Measurement Results of Chemical Composition Analysis
CSM 01010100-2006 Guidelines for the Uncertainty Assessment of Measurement Results of Chemical Composition Analysis
CSM 01010106-2006 Specification for Uncertainty Evaluation of Measurement Results of Gas Analysis Methods in Iron, Steel and Alloys
CSM 01 01 01 06-2006 Specification for Uncertainty Evaluation of Measurement Results of Gas Analysis Methods in Iron, Steel and Alloys

PT-IPQ, 3. Results and Analysis

NP 1603-1986
NP 3950-1991 Edible fats and oils Inspection by attributes. Analytical results appreciation

Taiwan Provincial Standard of the People's Republic of China, 3. Results and Analysis

CNS 5921-1985 Method of Test for Tobacco and Tobacco Products: Expression of Analytical Test Results

GOSTR, 3. Results and Analysis

GOST 34092-2017 Solid biofuel. Conversion of analytical results on different basis

Japanese Industrial Standards Committee (JISC), 3. Results and Analysis

JIS Z 8819-1:1999 Representation of results of particle size analysis -- Part 1: Graphical representation
JIS Z 8819-2:2001 Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions

RU-GOST R, 3. Results and Analysis

GOST R 51124-1997 Fruit and vegetable juices. Protometrical method for determination of proline
GOST ISO 12787-2016 Perfumery and cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
GOST R 51122-1997 Fruit and vegetable juices. Potentiometrical method for determination of the formol number
GOST R 51430-1999 Fruit and vegetable juices. Spectrophotometric method for determination of phosphorus content
GOST R 55113-2012 Solid biofuels. Conversion of analytical results from one basis to another
GOST R ISO 5725-1-2002 Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions

CZ-CSN, 3. Results and Analysis

CSN 44 1310-1989 Symbols of analytical parameters and formulae for corverting the results of analyses on different states of fuels
CSN ISO 9276-1:1994 Representation of results of particle size analysis-Part 1:Graphical representation
CSN 441310-2001 Solid fuels - Symbols of analytical parameters and formulae for converting the results of analyses of different states of fuels
CSN 44 1310-2001 Solid fuels - Symbols of analytical parameters and formulae for converting the results of analyses of different states of fuels
CSN 67 3094 Z1-1998

European Committee for Standardization (CEN), 3. Results and Analysis

EN 15296:2011 Solid biofuels - Conversion of analytical results from one basis to another [Superseded: CEN CEN/TS 15296]
PD CEN/TR 15522-2:2012 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses
EN ISO 16993:2015 Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2015)
EN ISO 16993:2016 Solid biofuels - Conversion of analytical results from one basis to another
prEN 15522-2-2020 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results based on GC-FID and GC-MS low resolution analyses
EN 15522-2:2023 Oil spill identification - Petroleum and petroleum related products - Part 2: Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses
EN ISO 22753:2022 Molecular biomarker analysis - Method for the statistical evaluation of analytical results obtained in testing sub-sampled groups of genetically modified seeds and grains - General requirements (ISO 22753:2021, Corrected version 2022-11)

IN-BIS, 3. Results and Analysis

IS 7753-1989

American National Standards Institute （ANSI), 3. Results and Analysis

ANSI/ASTM D7372:2021 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
ANSI/ASTM D7372:2012 Guide for Analysis and Interpretation of Proficiency Test Program Results
ANSI/ASTM E1323:2009 Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
ANSI/ASCE 1-1988 N-725 Guideline for Design and Analysis of Nuclear Safety Related Earth Structures

AGMA - American Gear Manufacturers Association, 3. Results and Analysis

P229.27-1983 Results of an Experimental Program Utilized to Verify a New Gear Tooth Strength Analysis

国家能源局, 3. Results and Analysis

SY/T 10040-2016 Design and analysis of floating structure positioning system

European Telecommunications Standards Institute (ETSI), 3. Results and Analysis

ETSI TR 102 716-2-2010 Speech and multimedia Transmission Quality (STQ); Guidelines, objectives and results of speech quality analysis in the context of interworking Plugtests for multiplay services; Part 2: Results (V1.1.2)

Professional Standard - Nuclear Industry, 3. Results and Analysis

EJ/T 768-1993 Ultrasonic flaw detection method and flaw detection result classification of nuclear grade container overlay welding layer

ACI - American Concrete Institute, 3. Results and Analysis

ACI 358.1R-1992 Analysis and Design of Reinforced and Prestressed-Concrete Guideway Structures

IX-EU/EC, 3. Results and Analysis

2002/657/EC-2002 Commission Decision Implementing Council Directive 96/23/EC Concerning the Performance of Analytical Methods and the Interpretation of Results (Text with EEA Relevance; Notified under Document Number C(2002)3044))

ES-UNE, 3. Results and Analysis

UNE-EN ISO 16993:2017 Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2016)
UNE-CEN/TR 15522-2:2006 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results (Endorsed by AENOR in April of 2007.)

Heilongjiang Provincial Standard of the People's Republic of China, 3. Results and Analysis

DB23/T 2646-2020 Quality inspection and acceptance of surveying and mapping geographic information results part 4: real scene 3D model

Jiangsu Provincial Standard of the People's Republic of China, 3. Results and Analysis

DB32/T 3675-2019 Table Structure and Identifier of Eigenvalue Database for Rainwater Regime Analysis
DB32/T 4188-2022 Table Structure and Identifier of Surface Water Resources Analysis and Evaluation Database

CEN - European Committee for Standardization, 3. Results and Analysis

PD CEN/TR 15522-2:2006 Oil spill identification - Waterborne petroleum and petroleum products - Part 2: Analytical methodology and interpretation of results

ETSI - European Telecommunications Standards Institute, 3. Results and Analysis

TR 102 716-2-2010 Speech and multimedia Transmission Quality (STQ); Guidelines@ objectives and results of speech quality analysis in the context of interworking Plugtests for multiplay services; Part 2: Results (V1.1.2)

HU-MSZT, 3. Results and Analysis

MSZ KGST 830-1977

Lithuanian Standards Office , 3. Results and Analysis

LST EN 15296-2011 Solid biofuels - Conversion of analytical results from one basis to another

Anhui Provincial Standard of the People's Republic of China, 3. Results and Analysis

DB34/T 2915-2022 Three-stage safety risk analysis and prevention management regulations for highway and water transport projects
DB34/T 2915-2017 Three-stage safety risk analysis and prevention management regulations for highway and water transport projects

Professional Standard - Petroleum, 3. Results and Analysis

SY/T 10040-2002 Recommended practice for design and analysis of stationkeeping systems for floating structures

Professional Standard - Construction Industry, 3. Results and Analysis

JGJ/T 302-2013 Technical code for construction process analyzing and monitoring of building engineering
JGJ 302-2013 Technical Specifications for Structural Analysis and Monitoring in the Construction Process of Construction Engineering

ESDU - Engineering Sciences Data Unit, 3. Results and Analysis

ESDU 02013-2002 Full-potential (FP) method for three-dimensional wings and wing-body combinations - inviscid flow Part 1: Principles and results
ESDU 02013 A-2006 Full-potential (FP) method for three-dimensional wings and wing-body combinations - inviscid flow. Part 1: Principles and results.

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, 3. Results and Analysis

REPORT M.2136-2008 Theoretical analysis and testing results pertaining to the determination of relevant interference protection criteria of ground-based meteorological radars

Group Standards of the People's Republic of China, 3. Results and Analysis

T/CSTM 00277.2-2022 Evaluation of stability for analytical instruments Part 2: Evaluation based on the precision of intra-laboratory determination results

SE-SIS, 3. Results and Analysis

SIS SS IEC 225:1985 Acoustics - Octave, half-octave and third-octave band filters intended for the analysis of sounds and vibrations

Canadian Standards Association (CSA), 3. Results and Analysis

CAN/CSA-ISO 16993:2015 Solid biofuels - Conversion of analytical results from one basis to another (First Edition)
CSA Z15882-09-CAN/CSA-2009 Sterilization of health care products ?Chemical indicators ?Guidance for selection, use and interpretation of results Second Edition

KR-KS, 3. Results and Analysis

KS C IEC 60493-1-2019 Guide for the statistical analysis of ageing test data — Part 1:Methods based on mean values of normally distributed test results

ZA-SANS, 3. Results and Analysis

SANS 22971:2010 Accuracy (trueness and precision) of measurement methods and results - Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results

International Telecommunication Union (ITU), 3. Results and Analysis

ITU-R REPORT M.2136-2008 Theoretical analysis and testing results pertaining to the determination of relevant interference protection criteria of ground-based meteorological radars

VN-TCVN, 3. Results and Analysis

TCVN 5465-8-2009 Textiles.Quantitative chemical analysis.Part 8: Mixtures of acetate and triacetate fibres (method using acetone)
TCVN 5465-9-2009 Textiles.Quantitative chemical analysis.Part 9: Mixtures of acetate and triacetate fibres (method using benzyl alcohol)
TCVN 6910-1-2001 Accuracy (trueness and precision) of measurement methods and results.Part 1: General principles and definitions

International Electrotechnical Commission (IEC), 3. Results and Analysis

IEC 60599:1999 Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis
IEC 60599:2007 Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis
IEC 60493-1:1974 Guide for the statistical analysis of ageing test data - Part 1 : Methods based on mean values of normally distributed test results
IEC 60493-1:2011 Guide for the statistical analysis of ageing test data - Part 1: Methods based on mean values of normally distributed test results

European Committee for Electrotechnical Standardization（CENELEC）, 3. Results and Analysis

EN 60599:2016 Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis