ZH
RU
ES

electrochemical voltage capacitance method

electrochemical voltage capacitance method, Total:500 items.

In the international standard classification, electrochemical voltage capacitance method involves: Semiconducting materials, Capacitors, Electrical wires and cables, Inorganic chemicals, Testing of metals, Electrical and electronic testing, Analytical chemistry, Insulating fluids, Nuclear energy engineering, Textile fibres, Wind turbine systems and other alternative sources of energy, Corrosion of metals, Vocabularies, Acoustics and acoustic measurements, Electromagnetic compatibility (EMC), Powder metallurgy, Non-ferrous metals, Galvanic cells and batteries, Surface treatment and coating, Resistors, Aerospace electric equipment and systems, Insulating materials, Electrical accessories, Environmental testing, Products of the textile industry, Iron and steel products, Ceramics, Glass, Components for electrical equipment, Electricity. Magnetism. Electrical and magnetic measurements, Freight distribution of goods, Industrial furnaces, Solar energy engineering, Piezoelectric and dielectric devices, Road vehicle systems, Power transmission and distribution networks, Rectifiers. Convertors. Stabilized power supply, Rubber, Products of the chemical industry, On-board equipment and instruments, Power stations in general, Rotating machinery, Measurement of time, velocity, acceleration, angular velocity, Biology. Botany. Zoology, Telecommunication systems, Ferroalloys, Shipbuilding and marine structures in general, Materials and articles in contact with foodstuffs, Electronic tubes, Equipment for the chemical industry, Rubber and plastics products, Integrated circuits. Microelectronics, Optoelectronics. Laser equipment, Metalliferous minerals, Quality, Installations in buildings, Water quality, Cutting tools, Ferrous metals, Law. Administration, Fruits. Vegetables, Semiconductor devices, Electronic component assemblies, Jewellery, Crude petroleum, Measurement of volume, mass, density, viscosity.

Professional Standard - Electron, electrochemical voltage capacitance method

• SJ 3244.4-1989 Methods of measurement for profile distribution of carrier concentration of Gallium arsenide and Indium phosphide materials--Electrochemical voltage capacitance method
• SJ 1551-1979 Method of measurement for resistivity of silicon epitaxial layer (capacitance-voltage method) (Provisional)
• SJ/T 10725-2013 Electroacoustics.Measurement methods of electroacoustic characteristics for measurement condenser microphones
• SJ/T 11824-2022 Metal Oxide Semiconductor Field Effect Transistor (MOSFET) Equivalent Capacitance and Voltage Change Rate Test Method
• SJ/T 10557.2-1994 Methods of crystal grain structure measurement for aluminum foil for high voltage electrolytic capacitors
• SJ/T 10557.4-1994 Chemical analytical methods for aluminum foil for electrolytic capacitors - Determination of copper, iron, zinc, manganese and magnesium with atomic absorption spectrophotometry
• SJ/T 31381-1994 Requirements of readiness and methods of inspection and assessment for AC capacitor aging power sources
• SJ/T 10893-1996 General rules for chemical analysis of electronic glass
• SJ 455-1973 Methods of measurement for static interelectrode capacitance of high-voltage rectifier tubes
• SJ/T 11499-2015 Test method for measuring electrical properties of monocrystalline silicon carbide
• SJ/T 31380-1994 Requirements of readiness and methods of inspection and assessment for capacitor aging sets
• SJ 20858-2002 Measuring methods for electrical parameters of silicon carbide single crystal material
• SJ/T 11035-1996 Test method for chemical stability for water resistance of electronic glass

Underwriters Laboratories (UL), electrochemical voltage capacitance method

• UL 810A-2008 Electrochemical capacitors
• UL SUBJECT 810A-2006 OUTLINE OF INVESTIGATION FOR ELECTROCHEMICAL CAPACITORS (Issue Number 3)
• UL 810A BULLETIN-2012 UL Standard for Safety Electrochemical Capacitors (COMMENTS DUE: October 22@ 2012)
• UL 810A BULLETIN-2011 UL Standard for Safety Electrochemical Capacitors (COMMENTS DUE: April 25@ 2011)
• UL 810A BULLETIN-2017 UL Standard for Safety Electrochemical Capacitors (COMMENTS DUE: MARCH 20@ 2017)

Military Standard of the People's Republic of China-General Armament Department, electrochemical voltage capacitance method

• GJB 8356-2015 Electrochemical capacitor model naming method
• GJB 8357-2015 General specification for electric double layer electrochemical capacitors

American National Standards Institute （ANSI), electrochemical voltage capacitance method

• ANSI/UL 810-2012 Standard for Capacitors
• ANSI/UL 810A-2012 Standard for Electrochemical Capacitors
• ANSI/UL 810A-2008 UL Standard for Safety Electrochemical Capacitors (First Edition; Reprint with Revisions Through and Including March 28@ 2017)
• ANSI/IEEE 1407:2007 Guide for Accelerated Aging Tests for Medium-Voltage (5 kV-35 kV) Extruded Electric Power Cables Using Water-Filled Tanks
• ANSI/ASTM D5638:2005 Test Method for Chemical Resistance of Electrical Insulating Varnishes (10.02)

Professional Standard - Aerospace, electrochemical voltage capacitance method

• QJ 1823-1989 Chemical power supply voltage series
• QJ/Z 105-1982 Analytical method of chemical degreasing or electrochemical degreasing solution for iron and steel parts
• QJ/Z 100-1982 Analytical method of electrochemical polishing solution for stainless steel

Taiwan Provincial Standard of the People's Republic of China, electrochemical voltage capacitance method

• CNS 3739-1985 Method of Test for High Voltage Power Capacitors
• CNS 3738-1985 Method of Test for Low Voltage Capacitors
• CNS 12258-1988 Method of Electrochemical Reactivation Ratio Measurement for Stainless Steels
• CNS 8284-1982 Method of Chemical Analysis for Carbon in Metallic Silicon (Electric Method)
• CNS 8283-1982 Method of Chemical Analysis for Carbon in Metallic Silicon (Conductivity Method)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, electrochemical voltage capacitance method

• GB/T 11068-1989 Gallium arsenide epitaxial layer--Determination of carrier concentration--Voltage-capacitance method
• GB/T 11068-2006 Gallium arsenide epitaxial layer.Determination of carrier concentration voltage-capacitance method
• GB 11068-1989 GaAs Epitaxial Layer Carrier Concentration Capacitance-Voltage Measurement Method
• GB/T 12656-1990 Determination of electric strength at power frequence for capacitor paper
• GB/T 14346-2015 Man-made fiber.Testing method for unevenness of filament yarns.Capacitance method
• GB/T 23365-2009 Electrochemical performance test of lithium cobalt oxide.Test method for specific capacity and charge.discharge efficiency of the first cycle
• GB/T 23365-2023 Lithium cobalt oxide electrochemical performance test first discharge specific capacity and first charge and discharge efficiency test method
• GB/T 42161-2022 Electrochemical performance test of lithium iron phosphate—Test method for the initial discharge specific capacity and the initial efficiency
• GB/T 43093-2023 Lithium nickel manganese oxide electrochemical performance test first discharge specific capacity and first charge and discharge efficiency test method
• GB/T 23366-2009 Electrochemical performance test of lithium cobalt oxide.Test method for discharge plateau capacity ratio and cycle life
• GB/T 42287-2022 High-voltage test techniques—Measurement of partial discharges by electromagnetic and acoustic methods
• GB/T 42717-2023 Evaluation method for grid-connected performance of electrochemical energy storage power station
• GB/T 17626.11-1999 Electromagnetic compatibility. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
• GB/T 17626.11-2008 Electromagnetic compatibility.Testing and measurement techniques.Voltage dips, short interruptions and voltage variations immunity tests
• GB/T 26105-2010 Test of rust preventive oil for rust preventing ability.Electrochemical measurement with wire beam electrode
• GB/T 14146-1993 Silicon epitaxial layers--Determination of carrier concentration--Mercury probe Valtage-capacitance method
• GB/T 14146-2009 Silicon epitaxial layers-determination of carrier concentration-mercury probe voltages-capacitance method
• GB/T 9725-1988 Chemical reagent--General rules for potentiometric titration
• GB/T 9725-2007 Chemiaal reagent.General rule for potentiometric titration
• GB/T 17626.29-2006 Electromagnetic compatibility Testing and measurement techniques Voltage dips， short interruptions and voltage variations on d.c.input power port immunity tests
• GB/T 17626.34-2012 Electromagnetic compatibility.Testing and measurement techniques.Voltage dips,short interruptions and voltage variations immunity tests for equipment with mains current more than 16A per phase
• GB/T 32524.1-2016 Acoustics.Determination of sound power level and directivity character of power capacitor unit using sound pressure.Part 1:Precision method for hemi-anechoic rooms
• GB/T 26109-2010 Test of aqueous protective fluids for rust preventing ability.Electrochemical measurement with wire bean electrode
• GB/T 1695-2005 Rubber,vulcanized.Determination of electrical breakdown strength and voltage resistant at commercial power frequency
• GB/T 17625.7-2013 Electromagnetic compatibility.Limits.Limitation of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current≤75 A and subject to conditional connection
• GB/T 24268-2009 Test methods for chemical analysis of silver-tin oxide electric contact material
• GB/T 24196-2009 Corrosion of metals and alloys.Electrochemical test methods.Cuidelines for conducting potentiostatic and potentiodynamic polarization measurements
• GB/T 29088-2012 Corrosion of metals and alloys.Electrochemical potentiokinetic reactivation measurement using the double loop method
• GB/T 17625.2-2007 Eiectromagnetic compatibility limits(EMC) - Limitation of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems,for equipment with rated current ≤16A per phase and not subject to conditional connection
• GB 17625.2-2007 Electromagnetic compatibility (EMC).Limits.Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16A per phase and not subject to conditional connection
• GB/T 17848-1999 Test methods for electrochemical properties of sacrificial anodes
• GB/T 6285-2003 Determination of trace oxygen in gases--Eletrochemical method
• GB/T 26305-2010 The method for chemical of nickel oxide.Determination of nickel content.Electrolytic depositiono method
• GB/T 41898-2022 Electrochemical method for the determination of corrosion resistance and compactness of coatings on inner walls of food metal containers
• GB/T 23711.1-2009 Spark test method for pressure vessels lined with fluoroplastics
• GB/T 13671-1992 Stainless steels.Method of electrochemical test for crevice corrosion
• GB/T 11913-1989 Water quality--Determination of dissolved oxygen--Electrochemical probe method
• GB 11913-1989 Determination of dissolved oxygen in water by electrochemical probe method
• GB/T 14342-2015 Man-made fiber.Test method for specific resistance of staple fibers
• GB/T 11067.5-1989 Silver--Determination of carbon content--Combustion-conductometric method
• GB/T 4324.23-1984 Methods for chemical analysis of tungsten--The combustion-conductometric titration method for the determination of sulphur content
• GB 11067.5-1989 Silver—Determination of carbon content—combustion-conductometric method
• GB/T 4325.23-1984 Methods for chemical analysis of molybdenum--The combustion-conductometric titration method for the determination of sulphur content
• GB/T 10066.5-2014 Test methods for electroheat installations.Part 5:Plasma equipment for electroheat and electrochemical applications
• GB/T 8704.5-1994 Methods for chemical analysis of ferrovanadium. The potentiometric method for the determination of vanadium content
• GB/T 24170.1-2009 Surface antibacterial stainless steel.Part 1:Electrochemical method
• GB/T 24170.1-2023 Surface antibacterial stainless steel Part 1: Electrochemical method
• GB/T 1695-1981 Vulcanized rubber--Test method for industrial frequency puncture voltage and dielectric strength

Electronic Industrial Alliance (U.S.), electrochemical voltage capacitance method

• EIA 564-1992 Standard Test Method for Chemical Compatibility of Polycarbonate by Stress Crazing Evaluations

Korean Agency for Technology and Standards (KATS), electrochemical voltage capacitance method

• KS M 0013-2002 General rules for electrochemical analysis
• KS M 0013-1982 General rules for electrochemical analysis
• KS C 0272-1995(2000) ELECTROMAGNETIC COMPATIBILITY-TESTING AND MEASURMENT TECHNIQUES-VOLTAGE DIPS, SHORT INTERRUPTIONS AND VOLTAGE VARIATIONS IMMUNITY TEST
• KS C 0272-1995 Electromagnetic compatibility-Testing and measurement techniques-Voltage dips,short interruptions and voltage variations immunity
• KS D 1929-2019 Methods for photoelectric emission spectrochemical analysis of die casting zinc alloys
• KS D 1929-2004 Methods for photoelectric emission spectrochemical analysis of die casting zinc alloys
• KS D 1890-2012 Method for chemical analysis of electrolytic cathode copper
• KS D 1890-1987 Method for chemical analysis of electrolytic cathode copper
• KS D 7130-2005(2020) Method of electrochemical potentiokinetic reactivation ratio measurement for stainless steels
• KS L 1640-2021 Test methods for polarization of ceramic-based electrochemical cell by current interrupt technique
• KS C IEC 60680:2006 The methods of plasma equipment for electroheat applications
• KS D 1899-2019 Methods for photoelectric emission spectrochemical analysis of electrolytic cathode copper
• KS C IEC 63041-2:2019 Piezoelectric sensors — Part 2: Chemical and biochemical sensors
• KS C CISPR 17-2004 Electromagnetic compatibility(EMC)-Methods of measurement of the suppression characteristics ofpassive radio interference filters and suppression components
• KS D 7130-2005 Method of electrochemical potentiokinetic reactivation ratio measurement for stainless steels
• KS D 1790-1993 Methods of chemical analysis for nickel chromium electric heating material
• KS D 1838-2014 Methods of chemical analysis for iron chromium electric heating material
• KS D 1890-2012(2020) Method for chemical analysis of electrolytic cathode copper
• KS C 9610-4-11-2020 Electromagnetic compatibility(EMC) ― Part 4-11: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests
• KS C IEC 61000-4-11-2008(2013) Electromagnetic compatibility(EMC)－Part 4-11：Testing and measurement techniques－Voltage dips, short interruptions and voltage variations immunity tests
• KS D ISO 17475-2017(2022) Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
• KS C IEC 61000-4-11:2008 Electromagnetic compatibility(EMC)－Part 4-11：Testing and measurement techniques－Voltage dips, short interruptions and voltage variations immunity tests
• KS C 9610-4-11-2017 Electromagnetic compatibility(EMC) ― Part 4-11: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations immunity tests
• KS D 1790-2003 Method of chemical analysis for nickel chromium electric heating material
• KS D 1838-2009 Methods of chemical analysis for iron chromium electric heating material
• KS D 1963-2009 Methods for chemical analysis of copper nickel resistance material
• KS D 1963-2009(2019) Methods for chemical analysis of copper nickel resistance material
• KS D 1838-2019 Methods of chemical analysis for iron chromium electric heating material
• KS D ISO 12169-2001(2011) Nickel oxide－Determination of nickel content－Electrolytic deposition method
• KS D ISO 19318:2005 Surface chemical analysis－X-ray photoelectron spectroscopy－Reporting of methods used for charge control and charge correction
• KS E ISO 10469-2003(2020) Copper sulfide concentrates－Determination of copper content－Electrogravimetric method
• KS I ISO 5814:2007 Water quality－Determination of dissolved oxygen－Electrochemical probe method
• KS I ISO 5814:2017 Water quality－Determination of dissolved oxygen－Electrochemical probe method
• KS D 1790-2018 Method of chemical analysis for nickel chromium electric heating material
• KS D ISO 1976-2002(2017) Zinc alloys－Determination of copper content－Electrolytic method
• KS D ISO 796-2012(2017) Aluminium alloys－Determination of copper－Electrolytic method
• KS C IEC 61000-4-29:2014 Electromagnetic compatibility(EMC) — Part 4-29: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
• KS C IEC 61000-4-29-2014(2019) Electromagnetic compatibility(EMC) — Part 4-29: Testing and measurement techniques — Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
• KS D ISO 17475:2008 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
• KS D ISO 17475:2017 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
• KS I ISO 6145-11:2010 Gas analysis-Preparation of calibration gas mixtures using dynamic volumetric methods-Part 11:Electrochemical generation
• KS I ISO 6145-11:2015 Gas analysis－Preparation of calibration gas mixtures using dynamic volumetric methods－Part 11：Electrochemical generation
• KS D ISO 19318-2005(2020) Surface chemical analysis－X-ray photoelectron spectroscopy－Reporting of methods used for charge control and charge correction
• KS D ISO 11427-2006(2021) Determination of silver in silver jewellery alloys－Volumetric (potentiometric) method using potassium bromide
• KS C IEC 61000-3-11:2004 Electromagnetic compatibility(EMC)-Part 3-11: Limits- Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems-Equipment with rated current £ 75 A and subjet to conditional connection
• KS C IEC 61000-3-11:2014 Electromagnetic compatibility(EMC)-Part 3-11: Limits- Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems-Equipment with rated current £ 75 A and subjet to conditional connection
• KS D ISO 6467-2002(2012) Ferrovanadium－Determination of vanadium content－Potentiometric method
• KS D 2518-2015(2020) Methods for photoelectric emission spectrochemical analysis of cadmium metal

ES-AENOR, electrochemical voltage capacitance method

• UNE 7 022

Professional Standard - Energy, electrochemical voltage capacitance method

• NB/T 20381-2016 Design criteria for chemical and volume control system in pressurized water reactor nuclear power plants
• DL/T 5861-2023 Depth regulations for preliminary design content of electrochemical energy storage power stations
• DL/T 5862-2023 Regulations on the depth of construction drawing design content for electrochemical energy storage power stations
• DL/T 5860-2023 Requirements for the depth of content in the feasibility study report for electrochemical energy storage power stations
• NB/T 20154-2012 Guideline of ageing management for PWR reactor pressure vessels
• NB/T 42004-2013 Test method for voltage-endurance test on groundwall insulation of stator coil of high voltage AC machines

Professional Standard - Nuclear Industry, electrochemical voltage capacitance method

• EJ/T 669-2005 Criteria for chemical and volume control system design for pressurized water reactor nuclear powr plant
• EJ/T 345-2005 The control of water chemistry for pressurized water reactor nuclear power plant
• EJ 345-1988 Water chemistry specification for pressurized water reactor nuclear power plant

Group Standards of the People's Republic of China, electrochemical voltage capacitance method

• T/IAWBS 003-2017 Determination of Carrier Concentration in SiC Epitaxial Layer_Mercury Probe Capacitance-Voltage Method
• T/CEC 5026-2020 Depth regulations for preliminary design content of electrochemical energy storage power stations
• T/CNS 6-2018 Electrochemistry test method in high temperature high pressure water for metallic materials used in nuclear power plants
• T/CEC 5024-2020 Regulations on the depth of construction drawing design content for electrochemical energy storage power stations
• T/CEC 5025-2020 Requirements for the depth of content in the feasibility study report for electrochemical energy storage power stations
• T/QGCML 1460-2023 Technical Specifications for Electrochemical Preparation of Electrode Systems
• T/CES 170-2022 Technical specification for test of automatic generation control and automatic voltage control systems in electrochemical energy storage power station
• T/ZZB 0212-2017 Environmental friendly low voltage metallized film capacitors for adjusting power factor
• T/CEC 465-2021 Technical Specifications for High Voltage Electrochemical Energy Storage Converters
• T/GSEA 002-2023 Testing method for power quality of electrochemical energy storage-photovoltaic system
• T/CSAE 96-2019 EMC test method and requirement of high voltagecomponent of Electrical vehicle
• T/QDAS 030-2019 Electrochemiluminescence detection of tertiary amines and polyamines based on graphene electrode
• T/CEPPEA 5004.3-2020 Regulations on the depth of content of construction drawing design documents for conventional islands of nuclear power plants Part 3: Chemistry of power plants
• T/SHSFJD 0002-2021 Guidelines for forensic identification of human high voltage electrical injury
• T/ZSZJX 006-2020 Water quality－Determination of the chemical oxygen demand－Potentiometric titration
• T/GSEA 003-2023 In-situ test method for electrochemical energy storage-photovoltaic system
• T/MBJX 0006-2021 Test method for electrical parameters of DC high voltage generator

American Society for Testing and Materials (ASTM), electrochemical voltage capacitance method

• ASTM F1153-92(1997) Standard Test Method for Characterization of Metal-Oxide-Silicon (MOS) Structures by Capacitance-Voltage Measurements
• ASTM F1113-87(2005)e1 Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
• ASTM F1113-87(2011) Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
• ASTM D3230-10 Standard Test Method for Salts in Crude Oil (Electrometric Method)
• ASTM D5638-18 Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes

CH-SNV, electrochemical voltage capacitance method

• VSM 34343-1974

Association Francaise de Normalisation, electrochemical voltage capacitance method

• NF T01-050:1979 Electrochemical methods. Vocabulary.
• NF EN 61000-3-3/A1:2019 Compatibilité électromagnétique (CEM) - Partie 3-3 : limites - Limitation des variations de tension, des fluctuations de tension et du papillotement dans les réseaux publics d'alimentation basse tension, pour les matériels ayant un courant assign...
• NF EN 61000-3-3:2014 Compatibilité électromagnétique (CEM) - Partie 3-3 : limites - Limitation des variations de tension, des fluctuations de tension et du papillotement dans les réseaux publics d'alimentation basse tension, pour les matériels ayant un courant assign...
• NF X20-378:1979 Gas analysis. Oxygen analysis. Electrochemical method with solid electrolyte.
• NF EN IEC 60384-17:2019 Condensateurs fixes utilisés dans les équipements électroniques - Partie 17 : spécification intermédiaire - Condensateurs fixes pour tension alternative et pour impulsions à diélectrique en film de polypropylène métallisé
• NF EN IEC 61000-3-11:2019 Compatibilité électromagnétique (CEM) - Partie 3-11 : limites - Limitation des variations de tension, des fluctuations de tension et du papillotement dans les réseaux publics d'alimentation basse tension - Équipements ayant un courant assigné in...
• NF C93-041-2*NF EN IEC 63041-2:2018 Piezoelectric Sensors - Part 2 : chemical and biochemical Sensors
• NF EN IEC 63041-2:2018 Capteurs piézoélectriques - Partie 2 : capteurs chimiques et biochimiques
• NF C91-003-11*NF EN 61000-3-11:2001 Electromagnetic compatibility (EMC) - Part 3-11 : limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current below or equal to 75 A and subject to conditional connection.
• NF X20-379:1979 Gas analysis. Oxygen analysis. Electrochemical methods with liquid or gelled electrolyte.
• NF C91-004-11*NF EN 61000-4-11:2004 Electromagnetic compatibility (EMC) - Part 4-11 : testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
• NF EN 61000-4-29:2001 Compatibilité électromagnétique (CEM) - Partie 4-29 : techniques d'essai et de mesure - Essais d'immunité aux creux de tension, coupures brèves et variations de tension sur les accès d'alimentation en courant continu
• C54-107:1994 Shunt capacitors for A.C. Power systems having a rated voltage above 1000 V. Part 3 : renforced endurance testing.
• NF C91-004-34/A1*NF EN 61000-4-34/A1:2009 Electromagnetic compatibility (EMC) - Part 4-34 : testing and measuring techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase.
• NF T90-106:1993 Water quality - Determination of dissolved oxygen - Electrochemical probe method.
• NF EN ISO 5814:2012 Qualité de l'eau - Dosage de l'oxygène dissous - Méthode électrochimique à la sonde
• NF A05-403*NF EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements.
• NF X20-205-11*NF EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11 : electrochemical generation.
• NF C91-003-3/A2:2006 Electromagnetic compatibility (EMC) - Part 3-3 : limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current inferior or equal 16 A per phase and not subject to conditiona
• NF EN 60384-17-1:2006 Condensateurs fixes utilisés dans les équipements électroniques - Partie 17-1 : spécification particulière cadre : condensateurs fixes pour tension alternative et pour impulsions à diélectrique en film de polypropylène métallisé - Niveaux d'...
• NF C91-003-3:2008 Electromagnetic compatibility (EMC) - Part 3-3 : limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current inferior or equal 16 A per phase and not subject to conditiona
• NF C91-003-3:1995 Electromagnetic compatibility (EMC). Part 3-3 : limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current inferior or equal 16 A per phase and not subject to conditional
• NF EN 61000-4-34/A1:2009 Compatibilité électromagnétique (CEM) - Partie 4-34 : techniques d'essai et de mesure - Essais d'immunité aux creux de tension, coupures brèves et variations de tension pour matériel ayant un courant d'alimentation de plus de 16 A par phase
• NF EN 60831-2:2014 Condensateurs shunt de puissance autorégénérateurs pour réseaux à courant alternatif de tension assignée inférieure ou égale à 1 000 V - Partie 2 : essais de viellissement, d'autorégénération et de destruction
• NF S91-141:1990 BIODEGRADABILITY OF DENTAL ALLOYS. STANDARDIZATION OF ELECTROCHEMICAL TESTS.
• NF C91-003-11*NF EN IEC 61000-3-11:2019 Electromagnetic compatibility (EMC) - Part 3-11 : limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current less than or equal to 75 A and subject to conditional connection
• NF C91-004-34*NF EN 61000-4-34:2007 Electromagnetic compatibility (EMC) - Part 4-34 : testing and measuring techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase
• NF A10-910:1977 Chemical analysis of ferro-vanadium. Potentiometric determination of vanadium.

RU-GOST R, electrochemical voltage capacitance method

• GOST R 51317.4.11-2007 Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity. Requirements and test methods
• GOST R 51317.4.11-1999 Electromagnetic compatibility of technical equipment. Immunity to dynamic changes of power supply voltage. Requirements and test methods
• GOST 30804.4.11-2013 Electromagnetic compatibility of technical equipment. Voltage dips, short interruptions and voltage variations immunity. Requirements and test methods
• GOST 29284-1992 Current sources primary. Control methods of electric parameters
• GOST 21342.17-1978 Resistors. Test method for resistance change depending upon voltage
• GOST 16745-1983 Capacity paper. Method for determining break-down voltage at alternating (frequency 50 Hz.) and direct voltage
• GOST 19806-1974 Chemical threads. Method of electric resistance determination
• GOST R 51317.3.3-2008 Electromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A (per phase) and not subject to conditional connection. Limits
• GOST R 51317.3.3-1999 Electromagnetic compatibility of technical equipment. Voltage fluctuation and fliker impressed on low-voltage supply systems by equipment with rated current 16 A. Limits and test methods
• GOST R 51317.3.11-2006 Electromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 75 A and subject to conditional connection. Limits and test methods
• GOST R 50627-1993 Electromagnetic compatibility of technical equipment. Immunity to dynamic voltage changes in power supply networks. Technical requirements and test methods
• GOST 30376-1995 Electromagnetic compatibility of technical equipment. Immunity to dynamic voltage changes in power supply networks. Technical requirements and test methods
• GOST 32132.3-2013 Electromagnetic compatibility of technical equipment. Low-voltage power supplies, d.c. output. Requirements and test methods
• GOST R 50799-1995 Electromagnetic compatibity of technical equipment. Immunity of radiocommunications equipment to electrostatic discharge, impulsive disturbances and dynamic voltage changes in supply networks. Requirements and test methods
• GOST R 50034-1992 Electromagnetic compatibility. Asynchronous motors of voltage about 1000 V. Limits and test methods on immunity to electromagnetic disturbance
• GOST R 51317.4.17-2000 Electromagnetic compatibility of technical equipment. Immunity to d.c. power voltage ripples. Requirements and test methods
• GOST 30804.3.3-2013 Electromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test met
• GOST 24613.8-1983 Optoelectronic integrated microcircuits and optocouples. Methods for measuring of critical change rate of dielectric voltage
• GOST 28654-1990 Abrasive grains from aluminium oxide. Test methods of chemical composition
• GOST R 53390-2009 Electromagnetic compatibility of technical equipment. Low-voltage power supplies, d.c. output. Requirements and test methods
• GOST R 51527-1999 Electromagnetic compatibility of technical equipment. Stabilized power supplies, d.c.output. Conducted electromagnetic interference. Limits and test methods
• GOST 22227-1988 Man-made fiber and tow. Method of determination for electric resistance
• GOST 30804.4.13-2013 Electromagnetic compatibility of technical equipment. Immunity to non-sinusoidal distortion of supply voltage including mains signalling. Requirements and test methods

Professional Standard - Machinery, electrochemical voltage capacitance method

• JB/T 7774.1-1995 Silver Zinc Oxide Electrical Contact Material Chemical Analysis Method EDTA Volumetric Method Determination of Zinc Content
• JB/T 7777.2-1995 Silver tin oxide indium oxide electrical contact material chemical analysis method DETA volumetric method for determination of indium content
• JB/T 7778.3-1995 Method of chemical analysis for silver tungsten carbide electrical contact material - Determination of total carbon content by gas volumetric method
• JB/T 7778.1-1995 Methods of chemical analysis of silver tungsten carbide electrical contact materials Determination of silver content by thiocyanate volumetric method
• JB/T 8133.8-1999 Test method for physical-chemical properties of electrical carbon product.Compressive strength
• JB/T 7774.1-2008 Test methods for chemical analysis of silver-zinc oxide electric contact material.Part 1:Determination of zinc content
• JB/T 10528-2005 Anti-rust properties test of rust preventive oil.Electrochemical measurement with wire beam electrode
• JB/T 4107.5-1999 Chemical analyse method for electrical contact materials.Determination of nickel content in the silver - nickel ( ETDA volumetry method)
• JB/T 7777.2-2008 Test method for chemical analysis of silver-tin oxide-indium oxide electric contact materials.Part 2:Determination of indium
• JB/T 8133.2-1999 Test method for physical-chemical properties of electrical carbon product.Resistivity
• JB/T 8133.10-1999 Test method for physical-chemical properties of electrical carbon product.Radial mechanical strength
• JB/T 7778.3-2008 Test methods for chemical analysis of silver-tungsten carbide electric contact material.Part 3:Determination of overall carbon content
• JB/T 7778.4-1995 Method for chemical analysis of silver tungsten carbide electrical contact materials Acid separation-gas volumetric method for determination of free carbon content
• JB/T 10527-2005 Anti-rust properties test of aqueous protective fluids.Electrochemical measurement with wire beam electrode
• JB/T 7778.1-2008 Test methods for chemical analysis of silver-tungsten carbide electric contact material.Part 1:Determination of silver content
• JB/T 9499.1-1999 Method for chemical analysis of constantan resistance alloy The electrolytic gravimetric method for the determination of copper content
• JB/T 8133.8-2013 Test method for physical-chemical properties of electrical carbon product.Part 8:Compressive strength
• JB/T 10534-2005 Standard test method for simultaneous thickness and electrochemical potential determination of individual layers multilayer nickel deposit
• JB/T 8133.12-1999 Test method for physical-chemical properties of electrical carbon product.Hot resistance of carbon pile
• JB/T 6239.2-1992 General test method for industrial automation instruments Influence of power supply voltage frequency change
• JB/T 8505-1996 Chemical analysis method for copper-graphite electric contactor material
• JB/T 5893.6-1991 Raw materials of electrotechnical porcelain Chemical analysis method of potash feldspar
• JB/T 8505-2011 Test method for chemical analysis of copper-graphite electrical contact materials
• JB/T 8133.2-2013 Test method for physical-chemical properties of electrical carbon product.Part 2:Resistivity
• JB/T 7778.4-2008 Test methods for chemical analysis of silver-tungsten carbide electric contact material.Part 4:Determination of free carbon content
• JB/T 9499.5-1999 Method for chemical analysis of constantan resistance alloy The EDTA titrimetric method for the determination of nickel content after separation copper by electrolysis
• JB/T 8133.10-2013 Test method for physical-chemical properties of electrical carbon product.Part 10:Radial mechanical strength
• JB/T 9493.1-1999 Method for chemical analysis of manganin and novokostant resistance alloy The electrolytic gravimetric method for the determination of copper content
• JB/T 4107.7-1999 Chemical analyse method for electrical contact materials.Determination of carbon content in the silver - graphite ( Determine carbon content by the gas volumetry method)
• JB/T 9552.1-1999 Methods for chemical analysis of copper-chromium-zirconium alloys.The determination of copper by electrolytic methods
• JB/T 6239.3-1992 General test method for industrial automation instrumentation on the effect of power supply voltage drop

国家市场监督管理总局、中国国家标准化管理委员会, electrochemical voltage capacitance method

• GB/T 39864-2021 Electrochemical performance test of lithium manganese oxide—Test method for the initial specific discharge capacity and the initial efficiency
• GB/T 37201-2018 Electrochemical performance test of lithium nickel cobalt manganese oxide —Test method for discharge specific capacity and charge-discharge coulombic efficiency of the first cycle
• GB/T 14146-2021 Test method for carrier concentration of silicon epitaxial layers—Capacitance-voltage method
• GB/T 39861-2021 Electrochemical performance test of lithium manganese oxide—Test method for discharge plateau capacity ratio and cycle life
• GB/T 37207-2018 Electrochemical performance test of lithium nickel cobalt manganese oxide— Test method for discharge plateau capacity ratio and cycle life
• GB/T 11024.2-2019 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 2: Ageing testing

British Standards Institution (BSI), electrochemical voltage capacitance method

• BS EN IEC 63041-2:2018 Piezoelectric sensors. Chemical and biochemical sensors
• BS EN 2591-211:2002 Elements of electrical and optical connection - Test methods - Capacitance
• BS EN 61000-4-11:2004 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
• BS EN 61000-4-11:2004+A1:2017 Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
• BS EN 61340-4-4:2005 Electrostatics - Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC)
• BS DD IEC/TS 60680:2008 Test methods of plasma equipment for electroheat and electrochemical applications
• BS EN ISO 6145-11:2006 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Electrochemical generation
• BS EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11:Electrochemical generation
• BS EN 61000-3-11:2001 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated voltage current 75 A and subject to conditional connection
• DD IEC/TS 60680:2008 Test methods of plasma equipment for electroheat and electrochemical applications
• BS ISO 29081:2010 Surface chemical analysis - Auger electron spectroscopy - Reporting of methods used for charge control and charge correction
• BS EN 2591-612:2001 Elements of electrical and optical connection - Test methods - Optical elements - Effectiveness of cable attachment - Cable axial compression
• PD IEC TS 62565-5-1:2023 Nanomanufacturing. Product specifications. Nanoporous activated carbon. Blank detail specification: Electrochemical capacitors
• BS EN 61334-3-21:1997 Distribution automation using distriubution line carrier systems. Mains signalling requirements. MV phase-to-phase isolated capacitive coupling device
• 22/30419358 DC BS ISO 4905. Corrosion of metals and alloys. Electrochemical test methods. Guideline for electrochemical measurements in high temperature molten salts
• BS PD ISO/TR 18394:2016 Surface chemical analysis. Auger electron spectroscopy. Derivation of chemical information
• BS EN 3475-803:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance variation
• BS EN IEC 62884-3:2018 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators. Frequency aging test methods
• BS ISO 19318:2005 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
• PD IEC/TS 62478:2016 High voltage test techniques. Measurement of partial discharges by electromagnetic and acoustic methods
• BS EN 61000-3-3:2013+A2:2021 Electromagnetic compatibility (EMC) - Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
• BS EN ISO 5814:2012 Water quality. Determination of dissolved oxygen. Electrochemical probe method
• BS EN 60746-2:2003 Expression of performance of electrochemical analyzers - pH value
• BS EN 60746-1:2003 Expression of performance of electrochemical analyzers - General
• BS EN 25814:1992 Method for determination of dissolved oxygen in water: electrochemical probe method
• BS EN 61000-4-34:2007+A1:2009 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
• BS EN 61000-4-34:2007 Electromagnetic compatability (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16A per phase
• BS EN ISO 17475:2006 Corrosion of metals and alloys. Electrochemical test methods. Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
• BS EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
• BS EN 60931-2:1996 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. Ageing test and destruction test
• BS EN 61000-3-3:2008 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection
• BS EN 61000-3-3:2013 Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connection
• BS EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
• BS EN 2591-214:2012 Aerospace series. Elements of electrical and optical connection. Test methods. Lightning strike, current and voltage pulse
• 18/30381090 DC BS EN 61000-4-11. Electromagnetic compatibility (EMC). Part 4-11. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests

Professional Standard - Railway, electrochemical voltage capacitance method

• TB/T 2280-1991 Technical conditions for static differential voltage protection of shunt capacitors for electrified railways
• TB/T 2799-1997 Calculation Conditions and Methods of Harmonic Voltage Distortion Rate of Electrified Railway
• TB/T 1651-1996 Calculation Conditions and Methods of Transformer Capacity in Traction Substation

国家能源局, electrochemical voltage capacitance method

• NB/T 20436-2017 Water chemistry control in pressurized water reactor nuclear power plants
• NB/T 10814-2021 Integrated collective (box type) high voltage parallel capacitor device
• NB/T 25098-2018 Guidelines for supervision of water vapor chemistry in the secondary circuit of pressurized water reactor nuclear power plants

Canadian Standards Association (CSA), electrochemical voltage capacitance method

• CSA C61000-3-11:06-CAN/CSA-2006 Compatibilit?閘ectromagn閠ique (CEM) ?Partie 3-11: Limites ?Limitation des variations de tension, des fluctuations de tension et du papillotement dans les r閟eaux publics d抋limentation basse tension ?Equipements ayant un courant appel??5 A et soumis ?un
• CSA C61000-3-3-06-CAN/CSA-2006 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current less than or equal to 16 A per phase and not subject to condit
• CSA IEC 61000-2-8:04-CAN/CSA:2004 Electromagnetic compatibility (EMC) Part 2-8: Environment Voltage dips and short interruptions on public electric power supply systems with statistical measurement results First Edition
• CAN/CSA-C61000-3-11-2006 Electromagnetic compatibility (EMC) – Part 3-11: Limits – Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems – Equipment with rated current ≤75 A and subject to conditional connection (First Edition)
• CSA CEI 61000-4-11-05-CAN/CSA-2005 Compatibilite Electromagnetique (CEM) - Partie 4-11: Techniques d'essai et de mesure . Essais d'immunit?aux creux de tension, coupures br鑦es et variations de tension Deuxieme Edition; CEI 61000-4-11:2004
• CAN/CSA-CEI/IEC 61000-4-11:2005 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (Second Edition)
• CSA IEC 61000-4-11-01-CAN/CSA:2001 Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 11: Voltage Dips, Short Interruptions and Voltage Variations Immunity Tests First Edition

Professional Standard - Aviation, electrochemical voltage capacitance method

• HB/Z 5110.4-2000 Analytical method for electrochemical degreasing and chemical degreasing solution Determination of trisodium phosphate by EDTA volumetric method
• HB/Z 5110.1-2000 Electrochemical degreasing and chemical degreasing solution analytical method Potentiometric titration for determination of total alkalinity
• HB/Z 5110-1978 Electrochemical degreasing and chemical degreasing solution analysis method
• HB/Z 5105-1978 Electrochemical polishing solution analysis method
• HB/Z 5105.1-2000 Electrochemical Polishing Solution Analysis Method Potentiometric Titration Determination of Chromium Trioxide Content
• HB/Z 5105.2-2000 Electrochemical Polishing Solution Analysis Method Potentiometric Titration Determination of Chromium Trioxide Content
• HB/Z 5110.2-2000 Electrochemical degreasing and chemical degreasing solution analysis method Potentiometric titration determination of sodium hydroxide, sodium carbonate, trisodium phosphate
• HB/Z 5110.3-2000 Analytical methods for electrochemical degreasing and chemical degreasing solutions Determination of sodium silicate
• HB/Z 5105.3-2000 Electrochemical Polishing Solution Analysis Method Potentiometric Titration Determination of Sulfuric Acid and Phosphoric Acid
• HB/Z 5085.1-1999 Analytical method of cadmium electroplating solution in cyanide electroplating EDTA volumetric method to determine the content of cadmium oxide

CZ-CSN, electrochemical voltage capacitance method

• CSN 03 8528-1988 Chemical methods for checking of electroplating baths. Nickel plating bath
• CSN 70 0632 Cast.1-1986 Glass testing methods. Chemical analysis of glass. Determination of lead oxide. Volumetric method with complexone 3 (after the electrolytic separation)
• CSN 03 8526-1988 Chemical methods for checking of elec-troplating bath. Chromium plating bath
• CSN 03 8527-1989 Chemical methods for checking of elektroplating baths. Cadmium pla-tíng bath
• CSN 42 0615 Cast.5-1974 Chemical analysis of brazing alloys. Determination of copper by electrolytic method
• CSN 03 8522-1988 Chemical methods for checking of　electro baths. Acid copper plating bath
• CSN 42 0616 Cast.3-1974 Chemical analysis of silver solders. Determination of copper by the electrolytic method
• CSN 03 8523-1988 Chemical methods for checking of elec-trolytic baths. Copper cyanide and brass plating baths

Japanese Industrial Standards Committee (JISC), electrochemical voltage capacitance method

• JIS H 1560:2016 Method for photoelectric emission spectrochemical analysis of die casting zinc alloys
• JIS H 1103:1995 Method for photoelectric emission spectrochemical analysis of electrolytic cathode copper
• JIS H 1101:1990 Methods for chemical analysis of electrolytic cathode copper
• JIS H 1101:2013 Method for chemical analysis of electrolytic cathode copper
• JIS C 61000-4-11:2008 Electromagnetic compatibility (EMC) -- Part 4-11: Testing and measuring techniques -- Voltage dips, short interruptions and voltage variations immunity tests
• JIS H 1413:1996 Methods of chemical analysis for copper nickel resistance material
• JIS C 61000-4-11:2003 Electromagnetic compatibility (EMC) -- Part 4: Testing and measuring techniques -- Section 11: Voltage dips, short interruptions and voltage variations immunity tests
• JIS H 1411:1996 Methods of chemical analysis for iron chromium electric heating material
• JIS H 1412:1996 Methods of chemical analysis for nickel chromium electric heating material
• JIS K 0400-32-30:1999 Water quality -- Determination of dissolved oxygen -- Electrochemical probe method
• JIS G 0580:2003 Method of electrochemical potentiokinetic reactivation ratio measurement for stainless steels
• JIS H 1123:1995 Method for photoelectric emission spectrochemical analysis of lead metal
• JIS G 0580:1986 Method of electrochemical potentiokinetic reactivation ratio measurement for stainless steels

工业和信息化部, electrochemical voltage capacitance method

• SJ/T 11793-2022 Test method for electrochemical properties of lithium-ion battery electrode materials
• JC/T 1088-2021 Chemical analysis method of granulated electric furnace phosphorus slag
• SJ/T 11637-2016 General principles of inductively coupled plasma mass spectrometry for electronic chemicals
• SJ/T 11638-2016 Test methods for particles in electronic chemicals

RO-ASRO, electrochemical voltage capacitance method

• STAS 7874/1-1992 Chemical and electrochemical plating baths. Silver plating baths Methods of analysis
• STAS SR CEI 885-3-1988 Electrical test methods for electric cables Part 3: Test methods for partial discharge measurements on length of extruded power cable.
• SR 7874/15-1993 Baths for chemical and electrochemical platings. Burring baths. Methods of analysis
• STAS 12967-1991 Electrochemical coating bathes. Black chrome bathes. Analysis metods
• STAS 7874/9-1981 Electrochemical coating baths TIN ALKALINE BATHS Analysis methods
• STAS 12955-1991 Bathes for chemical coatings. Nickel plating bathes. Analysis methods
• STAS 7874/6-1990 Bathes for electrochemical coatings. Cheome bathes. Analysis methods
• STAS 7874/7-1990 Bathes for electrochemical coatings. Nichel coat bathes. Analysis methods
• STAS 7874/10-1981 Electrochemical coating baths TIN ACID BATHS Analysis methods
• STAS 7874/11-1981 Electrochemical coating baths BRASS PLATING BATHS Analysis methods
• STAS 7874/2-1981 Electrochemical coating baths COPPER ACID BATHS Analysis methods
• STAS 7874/3-1981 Electrochemical coating baths COPPER ALKALINE BATH Analysis methods
• STAS 7874/4-1981 Electrochemical coating baths ZINC PLATING BATHS Analysis methods
• STAS 7874/5-1981 Electrochemical coating baths CADMIUM PLATING BATHS Analysis methods
• STAS 7874/8-1981 Electrochemical coating baths LEAD PLATING BATHS Analysis methods
• STAS 7874/11-1992 Electrochemical plating baths. Copper-zinc setting baths. Methods of analysis

PL-PKN, electrochemical voltage capacitance method

• PN O79713-1989 Glass containers Internal pressure resistance Test methods
• PN E04160 ArkusZ37-1973 Elec?rlc cables Me?hods ot ?es?ing Test for resistance to the action of chemical subs?ances vapours

GOSTR, electrochemical voltage capacitance method

• GOST 28309-1989 Oxide electrolytic aluminium fixed capacitors. Explosion-proof test methods

Professional Standard - Building Materials, electrochemical voltage capacitance method

• JC/T 1088-2008 Methods for chemical analysis of granulated electric furnace phosphorous slag

International Electrotechnical Commission (IEC), electrochemical voltage capacitance method

• IEC 60588-2:1978 Askarels for transformers and capacitors. Part 2 : Test methods
• IEC 61000-3-3:2005 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per p
• IEC 60746-3:1985 Expression of performance of electrochemical analyzers - Part 3 : Electrolytic conductivity
• IEC TS 60680:2008 Test methods of plasma equipment for electroheat and electrochemical applications
• IEC 63041-2:2017 Piezoelectric sensors - Part 2: Chemical and biochemical sensors
• IEC 60746-5:1992 Expression of performance of electrochemical analyzers; part 5: oxidation-reduction potential or redox potential
• IEC TS 62565-5-2:2022 Nanomanufacturing - Material specifications - Part 5-2: Nano-enabled electrodes of electrochemical capacitors - Blank detail specification
• IEC 61000-4-11:2001 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measuring techniques; Voltage dips, short interruptions and voltage variations immunity tests
• IEC TS 62478:2016 High voltage test techniques - Measurement of partial discharges by electromagnetic and acoustic methods
• IEC 61000-4-11:2017 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
• IEC 61000-4-11:2004 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
• IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
• IEC 60588-1:1977 Askarels for transformers and capacitors. Part 1 : General
• IEC 61000-3-11:2000 Electromagnetic compatibility (EMC) - Part 3-11: Limits; Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems; Equipment with rated current 75 A and subject to conditional connection
• IEC 61000-3-3:2013+AMD1:2017+AMD2:2021 CSV Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A pe
• IEC 61000-3-3:2013+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16
• IEC 61000-3-11:2017 Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A
• IEC 61000-3-11:2017 RLV Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A
• IEC 61000-4-11:1994 Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques - Section 11: Voltage dips, short interruptions and voltage variations immunity tests
• IEC 61000-4-34:2005+AMD1:2009 CSV Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than
• IEC 61000-3-3:2013/AMD2:2021 Amendment 2 - Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated cu
• IEC 60588-5:1979 Askarels for transformers and capacitors. Part 5: Screening test for compatibility of materials and transformer askarels
• IEC 60588-3:1977 Askarels for transformers and capacitors. Part 3 : Specifications for new askarels
• IEC 61000-4-11/AMD1:2000 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations immunity tests; Amendment 1
• IEC 61000-4-11:2004/ISH1:2010 Interpretation Sheet 1 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
• IEC 61000-4-11:2004/AMD1:2017 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests; Amendment 1
• IEC 61000-3-3:2013 Electromagnetic compatibility (EMC).Part 3-3: Limits.Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional connectio
• IEC 61000-3-3:2008 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current 16 A per phase and not subject to conditional conne
• IEC 61000-3-3:2021 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
• IEC 61000-4-29:2000 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
• IEC 61000-4-34:2009 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
• IEC TR 62482:2008 Electrical installations in ships - Electromagnetic compatibility - Optimising of cable installations on ships - Testing method of routing distance

AENOR, electrochemical voltage capacitance method

• UNE-EN 61000-3-11:2002 Electromagnetic compatibility (EMC) -- Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current
• UNE-EN 61000-3-3:2013 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current
• UNE-EN 61000-4-11:2005/A1:2017 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
• UNE-EN 61000-4-11:2005 Electromagnetic compatibility (EMC) -- Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
• UNE-EN 61000-4-34:2008/A1:2010 Electromagnetic compatibility (EMC) -- Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
• UNE-EN 61000-4-29:2002 Electromagnetic compatibility (EMC) -- Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests.

ZA-SANS, electrochemical voltage capacitance method

• SANS 61000-3-11:2003 Electromagnetic compatibility (EMC) Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection
• SANS 61000-4-29:2005 Electromagnetic compatibility (EMC) Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
• SANS 61000-4-11:2005 Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
• SANS 61000-3-3:2009 Electromagnetic compatibility (EMC) Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
• PIESA 1048-2007 Electricity supply - Quality of supply - Voltage characteristics, compatibility levels, limits and assessment methods
• NRS 048-2-2003 Electricity supply — Quality of supply Part 2: Voltage characteristics, compatibility levels, limits and assessment methods

Professional Standard - Agriculture, electrochemical voltage capacitance method

• GB 9725-1988 General principles of potentiometric titration with chemical reagents
• T/CSIQ 78005-2018 Screening of lead, cadmium, mercury and arsenic in cosmetics—Electrochemical method

CENELEC - European Committee for Electrotechnical Standardization, electrochemical voltage capacitance method

• EN IEC 63041-2:2018 Piezoelectric sensors - Part 2: chemical and biochemical sensors
• EN 61000-4-11:1994 Electromagnetic Compatibility (EMC) Part 4: Testing and Measurement Techniques Section 11: Voltage Dips@ Short Interruptions and Voltage Variations Immunity Tests

KR-KS, electrochemical voltage capacitance method

• KS C IEC 63041-2-2019 Piezoelectric sensors — Part 2: Chemical and biochemical sensors
• KS D ISO 17475-2017 Corrosion of metals and alloys－Electrochemical test methods－Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
• KS C IEC 61000-3-11-2014 Electromagnetic compatibility(EMC)－Part 3－11： Limits－ Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems－Equipment with rated current £ 75 A and subje
• KS C IEC 61000-3-3-2014 Electromagnetic compatibility(EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per
• KS I ISO 5814-2017 Water quality－Determination of dissolved oxygen－Electrochemical probe method
• KS I ISO 5814-2023 Water quality — Determination of dissolved oxygen — Electrochemical probe method
• KS D ISO 17475-2023 Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
• KS D ISO 4140-2008(2023) Ferrochromium and ferrosilicochromium－Determination of chromium content－Potentiomentric mehtod

German Institute for Standardization, electrochemical voltage capacitance method

• DIN EN IEC 63041-2:2018-08 Piezoelectric sensors - Part 2: Chemical and biochemical sensors (IEC 63041-2:2017); German version EN IEC 63041-2:2018
• DIN IEC 60746-5:1996 Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential (IEC 60746-5:1992)
• DIN EN 61000-3-11:2001 Electromagnetic compatibility (EMC) - Part 3-11: Limits; Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems; Equipment with rated current 75 A and subject to conditional connection (IEC 61000-3
• DIN EN 61000-4-11:2005 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11:2004); German version EN 61000-4-11:2004
• DIN EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) (ISO 12732:2006); German version EN ISO 12732:2008
• DIN EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005); English version of DIN EN ISO 6145-11:2008-11
• DIN EN ISO 5814:2013-02 Water quality - Determination of dissolved oxygen - Electrochemical probe method (ISO 5814:2012); German version EN ISO 5814:2012
• DIN EN ISO 17475:2008-07 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); German version EN ISO 17475:2008
• DIN EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements (ISO 17475:2005+Cor. 1:2006); English version of DIN EN ISO 17475:2008-07

ES-UNE, electrochemical voltage capacitance method

• UNE-EN IEC 63041-2:2018 Piezoelectric Sensors - Part 2: Chemical and Biochemical Sensors (Endorsed by Asociación Española de Normalización in April of 2018.)
• UNE-EN 3475-803:2002 Aerospace series. Cables, electrical, aircraft use. Test methods. Part 803: Capacitance variation (Endorsed by AENOR in August of 2002.)
• UNE-IEC/TS 62478:2017 High voltage test techniques - Measurement of partial discharges by electromagnetic and acoustic methods
• UNE-EN IEC 61000-3-11:2020 Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection
• UNE-EN 2591-211:2002 Aerospace series. Elements of electrical and optical connection. Test methods. Part 211: Capacitance (Endorsed by AENOR in August of 2002.)
• UNE-EN 61000-3-3:2013/A1:2020 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
• UNE-EN 61000-3-3:2013/A2:2022 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current =16 A per phase and not subject to conditional connection

Standard Association of Australia （SAA）, electrochemical voltage capacitance method

• AS ISO 19318:2006 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
• AS/NZS 61000.3.11:2002 Electromagnetic compatibility (EMC) - Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current less than or equal to 75 A and subject to conditional connection
• AS/NZS IEC 61000.3.11:2023 Electromagnetic compatibility (EMC), Part 3.11: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems — Equipment with rated current ≤ 75 A and subject to conditional connection
• AS/NZS 61000.4.34:2012 Electromagnetic compatibility (EMC), Part 4.34: Testing and measurements techniques — Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
• AS/NZS 61000.3.3:2012
• AS/NZS 61000.4.11:2005 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11, Ed. 2.0 (2004) MOD)
• AS/NZS 61000.3.3:2003 Electromagnetic compatibility (EMC) Part 3.3: Limits--Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current less than or equal to 16A per phase and not subject to conditional
• IEC 61000-3-3:2013 RLV Electromagnetic compatibility (EMC) — Part 3-3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection
• AS/NZS IEC 61000.3.3:2023 Electromagnetic compatibility (EMC), Part 3.3: Limits — Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection

IN-BIS, electrochemical voltage capacitance method

• IS 7929-1975

BELST, electrochemical voltage capacitance method

• STB GOST R 50799-2000 Electromagnetic compatibility of technical equipment. Immunity of radio communications equipment to electrostatic discharge, impulsive disturbances and dynamic voltage changes in supply networks. Requirements and test methods

International Organization for Standardization (ISO), electrochemical voltage capacitance method

• ISO 29081:2010 Surface chemical analysis - Auger electron spectroscopy - Reporting of methods used for charge control and charge correction
• ISO/TR 18394:2006 Surface chemical analysis - Auger electron spectroscopy - Derivation of chemical information
• ISO 19318:2004 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
• ISO 19318:2021 Surface chemical analysis - X-ray photoelectron spectroscopy - Reporting of methods used for charge control and charge correction
• ISO 5814:1984 Water quality — Determination of dissolved oxygen — Electrochemical probe method
• ISO 5814:2012 Water quality - Determination of dissolved oxygen - Electrochemical probe method
• ISO 5814:1990 Water quality; determination of dissolved oxygen; electrochemical probe method
• ISO 12732:2006 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
• ISO 6145-11:2005 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation
• ISO 6145-1:2019 Gas analysis — Preparation of calibration gas mixtures using dynamic volumetric methods — Part 11: Electrochemical generation

NL-NEN, electrochemical voltage capacitance method

• NEN 6206-1978 Chemical analysis of iron and steel - Volumetric determination of the carbon content in iron and steel, after combustion in a high frequency furnace or a resistance furnace

Professional Standard - Electricity, electrochemical voltage capacitance method

• DL/T 5461.6-2013 Regulations for content and depth of detailed design documents of fossil-fired power plant.Part 6: Chemical
• DL/T 2220-2021 Technical regulations for instrumented indentation method testing of mechanical properties of metal materials in power stations

Danish Standards Foundation, electrochemical voltage capacitance method

• DS/EN 3475-803:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 803: Capacitance variation
• DS/EN 61000-4-11:2004 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
• DS/EN 61000-3-11:2001 Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current
• DS/EN 2591-211:2002 Aerospaces series - Elements of electrical and optical connection - Test Methods - Part 211: Capacitance
• DS/EN 61000-4-11:1994 Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 11: voltage dips,short interruptions and voltage variations immunity tests
• DS/EN ISO 5814:2013 Water quality - Determination of dissolved oxygen - Electrochemical probe method
• DS/EN 61000-4-29:2001 Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests
• DS/EN ISO 17475:2009 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
• DS/EN 61000-4-34/A1:2009 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase
• DS/EN 61000-3-3:2008 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
• DS/EN 61000-3-3:2013 Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection

Lithuanian Standards Office , electrochemical voltage capacitance method

• LST EN 3475-803-2003 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 803: Capacitance variation
• LST EN 2591-211-2003 Aerospaces series - Elements of electrical and optical connection - Test Methods - Part 211: Capacitance
• LST EN 61000-4-11-2004 Electromagnetic compatibility (EMC). Part 4-11: Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11:2004)
• LST EN 61000-3-11-2002 Electromagnetic compatibility (EMC). Part 3-11: Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current 75 A and subject to conditional connection (IEC 61000-3-

Indonesia Standards, electrochemical voltage capacitance method

• SNI IEC 61000-4-11:2013 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

European Committee for Electrotechnical Standardization（CENELEC）, electrochemical voltage capacitance method

• EN IEC 61000-3-11:2019 Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection
• EN 61000-3-11:2000 Electromagnetic Compatibility (EMC) Part 3-11: Limits - Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public Low-Voltage Supply Systems - Equipment with Rated Current Greater than or Equal to 75 A and Subject to Conditional Connection
• EN 61000-4-11:2004 Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
• EN 61000-4-34:2007 Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, electrochemical voltage capacitance method

• GB/T 6285-2016 Determination of trace oxygen in gases—Electrochemical method

European Committee for Standardization (CEN), electrochemical voltage capacitance method

• EN ISO 6145-11:2008 Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation
• EN 25814:1992 Water Quality - Determination of Dissolved Oxygen - Electrochemical Probe Method
• EN ISO 17475:2008 Corrosion of metals and alloys - Electrochemical test methods - Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
• EN ISO 12732:2008 Corrosion of metals and alloys - Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
• EN 3475-803:2002 Aerospace series - Cables, electrical, aircraft use; Test methods - Part 803: Capacitance variation

Anhui Provincial Standard of the People's Republic of China, electrochemical voltage capacitance method

• DB34/T 2579-2015 Methods for chemical analysis of copper electrolytes - Determination of chlorine content - Automatic potentiometric titration

VN-TCVN, electrochemical voltage capacitance method

• TCVN 7325-2004 Water quality.Determination of dissolved oxygen.Electrochemical probe method
• TCVN 7325-2016 Water quality - Determination of dissolved oxygen - Electrochemical probe method

AT-ON, electrochemical voltage capacitance method

• ONORM M 6266-1984 Water quality; determination of dissolved oxygen; electro- chemical probe method

SE-SIS, electrochemical voltage capacitance method

• SIS SS 02 81 88-1987 Determination of dissolved oxygen content in water - Electrochemical method

Professional Standard - Petroleum, electrochemical voltage capacitance method

• SY/T 6055-2002 Map of gravity,magnetic,electric and geochemical exploration

Professional Standard - Environmental Protection, electrochemical voltage capacitance method

• HJ 506-2009 Water quality.Determination of dissolved oxygen.Electrochemical probe method

机械电子工业部, electrochemical voltage capacitance method

• JB 5893.6-1991 Chemical analysis method of potassium feldspar, raw material for electric porcelain

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., electrochemical voltage capacitance method

• IEEE C63.4-1988 ELECTROMAGNETIC COMPATIBILITY - RADIO- NOISE EMISSIONS FROM LOW-VOLTAGE ELECTRICAL AND ELECTRONIC EQUIPMENT IN THE RANGE OF 10 KHZ TO 1 GHZ - METHODS OF MEASUREMENT

TH-TISI, electrochemical voltage capacitance method

• TIS 1449-2010 Electromagnetic compatibility (emc).part 3-3: limits.limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current≤16 a per phase and not subject to conditional connection
• TIS 2484-2010 Electromagnetic compatibility (emc).part 3-11: limits.limitation of voltage changes, voltage fluctuations and flicker in public low.voltage supply systems.equipment with rated current≤75 a and subject to conditional connection

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, electrochemical voltage capacitance method

• PREN 3475-803-1997 Aerospace Series Cables@ Electrical@ Aircraft Use Test Methods Part 803: Capacitance Variation (Edition P 1)

Defense Logistics Agency, electrochemical voltage capacitance method

• DLA MIL-PRF-39006/31 C-2011 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, (POLARIZED, SINTERED SLUG), (EXTENDED RANGE), 85癈 (VOLTAGE DERATED TO 125癈), ESTABLISHED RELIABILITY, STYLE CLR91
• DLA MIL-PRF-39006/25 E-2012 CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, (POLARIZED, SINTERED SLUG), (EXTENDED RANGE) 85癈 (VOLTAGE DERATED TO 125癈), ESTABLISHED RELIABILITY, STYLE CLR81
• DLA SMD-5962-95762-1995 MICROCIRCUIT, DIGITAL, FAST CMOS, BUFFER/CLOCK DRIVER WITH INVERTING THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON

European Association of Aerospace Industries, electrochemical voltage capacitance method

• AECMA PREN 2591-226-2005 Aerospace series Elements of electrical and optical connection Test methods Part 226: Corona level Edition P 1

Institute of Interconnecting and Packaging Electronic Circuits (IPC), electrochemical voltage capacitance method

• IPC 9691-2005 User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)

IPC - Association Connecting Electronics Industries, electrochemical voltage capacitance method

• IPC 9691A CHINESE-2007 User Guide for the IPC-TM-650@ Method 2.6.25@ Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)
• IPC 9691A CD-2007 User Guide for the IPC-TM-650@ Method 2.6.25@ Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)
• IPC 9691A CHINESE CD-2007 User Guide for the IPC-TM-650@ Method 2.6.25@ Conductive Anodic Filament (CAF) Resistance Test (Electrochemical Migration Testing)

AT-OVE/ON, electrochemical voltage capacitance method

• OVE EN IEC 61000-3-11:2021 Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection (german version)

Heilongjiang Provincial Standard of the People's Republic of China, electrochemical voltage capacitance method

• DB23/T 2751-2020 Determination of free chlorine and total chlorine in water by electrochemical method

Beijing Provincial Standard of the People's Republic of China, electrochemical voltage capacitance method

• DB11/T 176-2003 Measurement and calculation methods of electricituy balance for cubic type air compressor‘s unit

Institute of Electrical and Electronics Engineers (IEEE), electrochemical voltage capacitance method

• NFPA (Fire) SHV02 OSHA Stallcup's High-Voltage and Telecommunication Regulations Simplified

Others:   capacitance-voltage method, electrochemical voltage capacitance method.