ZH
RU
ES

Cycle Performance Discharge

Cycle Performance Discharge, Total:493 items.

In the international standard classification, Cycle Performance Discharge involves: Non-ferrous metals, Powder metallurgy, Wastes, Radiation protection, Pumps, Ventilators. Fans. Air-conditioners, Power stations in general, Electromechanical components for electronic and telecommunications equipment, Fibre optic communications, Vocabularies, Solar energy engineering, Nuclear energy engineering, Passenger cars. Caravans and light trailers, Domestic, commercial and industrial heating appliances, Refrigerating technology, Construction materials, Environmental protection, Equipment for the chemical industry, Rubber, Radiation measurements, Domestic electrical appliances in general, Heat recovery. Thermal insulation, Fluid storage devices, Products of the chemical industry, Fluid power systems, Energy and heat transfer engineering in general, Storage equipment, Burners. Boilers, Paints and varnishes, Laundry appliances, Reinforced plastics, Wood-based panels, Electrical wires and cables, Gas and steam turbines. Steam engines, Elements of buildings, Materials for aerospace construction, Rubber and plastics products, Geology. Meteorology. Hydrology, Electrical engineering in general, Electricity. Magnetism. Electrical and magnetic measurements, Water quality, Buildings, Fruits. Vegetables, Cinematography, Lifting equipment, Corrosion of metals, Lubricants, industrial oils and related products, Graphic technology, Medical equipment, Electromagnetic compatibility (EMC), Internal combustion engines for road vehicles, Installations in buildings, Surface treatment and coating, Soil quality. Pedology, Aerospace electric equipment and systems, On-board equipment and instruments, Electronic tubes, Microbiology, Protection of and in buildings, Road vehicles in general, Coatings and related processes used in aerospace industry, Telecommunication terminal equipment, Aircraft and space vehicles in general, Capacitors, Lamps and related equipment, Ceramics, Test conditions and procedures in general, Environmental testing, Pipeline components and pipelines, Semiconductor devices, Audio, video and audiovisual engineering, Shipbuilding and marine structures in general, Electrical equipment for working in special conditions.

Professional Standard - Machinery, Cycle Performance Discharge

• JB/T 14294-2022 Intelligent frequency conversion circulating electric pump
• JB/T 9409-2010 Method for determining various functions of motiaon-picture projection lenses

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Cycle Performance Discharge

• GB/T 23366-2009 Electrochemical performance test of lithium cobalt oxide.Test method for discharge plateau capacity ratio and cycle life
• GB/T 8404.2-1987 Test methods for environmental properties of optical fibres--Temperature cycling
• GB/T 13695-1992 Authorized limits for normalized releases of radioactive effltuents from nuclear fuel cycle
• GB/T 42260-2022 Electrochemical performance test of lithium iron phosphate—Test method for cycle life
• GB/T 17947-2000 Activity measurements of solid materials considered for recycling re-use, or disposal as non-radioactive waste
• GB/T 17947-2008 Activity measurements of solid materials considered for recycling re-use,or disposal as non-radioactive waste
• GB/T 10870-2014 The methods of performance test for water chilling (heat pump) packages using the vaper compression cycle
• GB/T 13174-2008 Determination of detergency and cycle of washing property for laundry detergents
• GB/T 15815-1995 Comparative test of performance for laundry detergents--Cycle of washing unsoiled cotton control cloth procedure
• GB/T 31330-2014 The performance test procedures of recirculating ball power steering lips seals
• GB/T 15972.52-2008 Specifications for optical fibre test methods.Part 52:Measurement methods and test procedures for environmental characteristics.Change of temperature
• GB/T 3048.12-1994 Test methods for determining electrical properties of electric cables and wires.Partial discharge test
• GB/T 42259-2022 Metallic and other inorganic coatings—Test methods for measuring thermal cycle resistance and thermal shock resistance for thermal barrier coatings
• GB/T 16145-2022 Gamma-ray spectrometry method for the determination of radionuclides in environmental and biological samples
• GB/T 3048.12-2007 Test methods for electrical properties of electric cables and wires.Part 12: Partial discharge test
• GB/T 23365-2009 Electrochemical performance test of lithium cobalt oxide.Test method for specific capacity and charge.discharge efficiency of the first cycle
• GB/T 23365-2023 Lithium cobalt oxide electrochemical performance test first discharge specific capacity and first charge and discharge efficiency test method
• GB/T 42161-2022 Electrochemical performance test of lithium iron phosphate—Test method for the initial discharge specific capacity and the initial efficiency
• GB/T 43093-2023 Lithium nickel manganese oxide electrochemical performance test first discharge specific capacity and first charge and discharge efficiency test method
• GB/T 18504-2001 Capacitors for use in tubular fluorescent and other discharge lamp circuits Performance requirements
• GB/T 25455-2010 Specifications for music performance evaluation of electronic musical instrument playback equipment
• GB/T 2424.5-2006 Enviromental tests for electric and electronic products.Confirmation of the performance of temperature chambers
• GB/T 3789.5-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid thermo-emission current
• GB/T 15397-1994 Measurement methods of A-chain and B-chain electro-acoustic frequency response of motion-picture control rooms, review rooms and indoor theatres

国家市场监督管理总局、中国国家标准化管理委员会, Cycle Performance Discharge

• GB/T 39861-2021 Electrochemical performance test of lithium manganese oxide—Test method for discharge plateau capacity ratio and cycle life
• GB/T 37207-2018 Electrochemical performance test of lithium nickel cobalt manganese oxide— Test method for discharge plateau capacity ratio and cycle life
• GB/T 40286-2021 The performance testing method of bi-circulation unit for low-temperature waste heat recovery and utilization
• GB/T 13174-2021 Determination of detergency and cycle of washing property for laundry detergents
• GB/T 40370-2021 Calculation methods for energy consumption index of gas-steam combined cycle cogeneration
• GB/T 39221-2020 Determination for performance of scale inhibitors for reverse osmosis seawater desalination—Recurrent condensation cycle test method
• GB/T 39864-2021 Electrochemical performance test of lithium manganese oxide—Test method for the initial specific discharge capacity and the initial efficiency
• GB/T 37201-2018 Electrochemical performance test of lithium nickel cobalt manganese oxide —Test method for discharge specific capacity and charge-discharge coulombic efficiency of the first cycle

Korean Agency for Technology and Standards (KATS), Cycle Performance Discharge

• KS A ISO 11932:2012 Activity measurements of solid materials considered for recycling, re-use, or disposal as non-radioactive waste
• KS C IEC 60879-2002(2022) Performance and construction of electric circulating fans and regulators
• KS C IEC 60879-2002(2017) Performance and construction of electric circulating fans and regulators
• KS D 8504-1996(2021) Method for assessing the characteristics of cyclic hydrogen absorption/desorption of hydrogen absorbing alloys
• KS B 8205-1998 Test methods of long-term performance for solar domestic water heating system
• KS A ISO 11933-5:2012 Components for containment enclosures－Part 5：Penetrations for electrical and fluid circuits
• KS F 2823-2006 Method of testing to determine the thermal properties of insulated heating tubes (hot water circulation procedure)
• KS M ISO 13003-2012(2022) Fibre-reinforced plastics－Determination of fatigue properties under cyclic loading conditions
• KS M ISO 13003-2012(2017) Fibre-reinforced plastics－Determination of fatigue properties under cyclic loading conditions
• KS F 2823-2016 Method of testing to determine the thermal properties of insulated heating tubes (hot water circulation procedure)
• KS F 2823-2016(2021) Method of testing to determine the thermal properties of insulated heating tubes (hot water circulation procedure)
• KS B ISO 12391-3-2015(2020) Gas cylinders－Refillable seamless steel－Performance tests－ Part 3：Fracture performance tests－Cyclical burst tests
• KS M 13763-13-2014(2019) Determination of resistance of electric detonators to electrostatic discharge
• KS M ISO 17463:2018 Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
• KS B ISO 12391-3:2005 Gas cylinders-Refillable seamless steel-Performance tests- Part 3:Fracture performance tests-Cyclical burst tests
• KS B ISO 12391-3:2015 Gas cylinders－Refillable seamless steel－Performance tests－ Part 3：Fracture performance tests－Cyclical burst tests
• KS X ISO/IEC 24700:2007 Information technology-Office equipment-Quality and performance of office equipment that contains reused components
• KS B ISO 12391-4-2015(2020) Gas cylinders－Refillable seamless steel－Performance tests－Part 4：Flawed-cylinder cycle test
• KS B ISO 12391-4:2005 Gas cylinders-Refillable seamless steel-Performance tests-Part 4:Flawed-cylinder cycle test
• KS B ISO 12391-4:2015 Gas cylinders－Refillable seamless steel－Performance tests－Part 4：Flawed-cylinder cycle test
• KS R ISO 17288-1:2003 Passenger cars-Free-steer behaviour-Part 1:Steering-release open-loop test method
• KS R ISO 17288-1:2014 Passenger cars — Free-steer behaviour — Part 1: Steering Passenger cars — Free-steer behaviour — Part 1: Steeringrelease
• KS C IEC 60879:2002 Performance and construction of electric circulating fans and regulators
• KS C IEC 60601-2-30:2011 Medical electrical equipment－Part 2-30：Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
• KS C IEC TR 63212:2022 Harmonization of environmental performance criteria for electrical and electronic products — Feasibility study
• KS V 8912-2016 Solar Regulator for Aids to Navigation– Safety and Performance Requirements
• KS C IEC 61049:2003 Auxiliaries for lamps-Capacitors for use in tubular fluorescent and other discharge lamp circuits-Performance requirements
• KS C IEC 61049:2013 Auxiliaries for lamps－Capacitors for use in tubular fluorescent and other discharge lamp circuits－Performance requirements
• KS A ISO 21238-2012(2022) Nuclear energy－Nuclear fuel technology－Scaling factor method to determine the radioactivity of low- and intermediate-level radioactive waste packages generated at nuclear power plants
• KS C IEC 61303:2007 Medical electrical equipment－Radionuclide calibrators－Particular methods for describing performance
• KS C IEC 61303:2018 Medical electrical equipment — Radionuclide calibrators — Particular methods for describing performance

工业和信息化部, Cycle Performance Discharge

• JB/T 13705-2019 Intelligent hot water circulation shielded electric pump
• HG/T 5708-2020 Test method for reaction performance of dense phase circulating fluidized bed methanol to olefins catalysts

Japanese Industrial Standards Committee (JISC), Cycle Performance Discharge

• JIS C 9809:1999 Performance and construction of electric circulating fans and regulators
• JIS A 1432:1995 Method of testing to determine the thermal properties of insulated heating tubes (Hot water circulation procedure)
• JIS C 8119:2008 Ballasts for discharge lamps (excluding tubular fluorescent lamps) -- Performance requirements

Indonesia Standards, Cycle Performance Discharge

• SNI IEC 60879:2013 Performance and construction of electric circulating fans and regulators

International Organization for Standardization (ISO), Cycle Performance Discharge

• ISO 18888:2017 Gas turbine combined cycle power plants — Thermal performance tests
• ISO 4138:2021 Passenger cars — Steady-state circular driving behaviour — Open-loop test methods
• ISO 12749-3:2015 Nuclear energy, nuclear technologies, and radiological protection - Vocabulary - Part 3: Nuclear fuel cycle
• ISO 11933-5:2001 Components for containment enclosures - Part 5: Penetrations for electrical and fluid circuits
• ISO 11932:1996 Activity measurements of solid materials considered for recycling, re-use, or disposal as non-radioactive waste
• ISO/CD TR 23260 Sludge recovery, recycling, treatment and disposal — Evaluation of sludge centrifugability
• ISO 17463:2022 Paints and varnishes — Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
• ISO 17463:2014 Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
• ISO/TR 12391-3:2002 Gas cylinders - Refillable seamless steel; Performance tests - Part 3: Fracture performance tests; Cyclical burst tests
• ISO 19455-1:2019 Planning for functional performance testing for building commissioning — Part 1: Secondary hydronic pump, system and associated controls
• ISO 23369:2021 Hydraulic fluid power - Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions
• ISO 23369:2022 Hydraulic fluid power — Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions
• ISO/TR 12391-4:2002 Gas cylinders - Refillable seamless steel; Performance tests - Part 4: Flawed-cylinder cycle test
• ISO 20836:2021 Microbiology of the food chain — Polymerase chain reaction (PCR) for the detection of microorganisms — Thermal performance testing of thermal cyclers
• ISO 17288-1:2002 Passenger cars - Free-steer behaviour - Part 1: Steering-release open-loop test method
• ISO 17288-1:2011 Passenger cars - Free-steer behaviour - Part 1: Steering-release open-loop test method
• ISO 18589-3:2023 Measurement of radioactivity in the environment — Soil — Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry
• ISO/FDIS 18589-3 Measurement of radioactivity in the environment — Soil — Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry

British Standards Institution (BSI), Cycle Performance Discharge

• BS ISO 18888:2017 Gas turbine combined cycle power plants. Thermal performance tests
• BS ISO 12749-3:2015 Nuclear energy, nuclear technologies, and radiological protection. Vocabulary. Nuclear fuel cycle
• BS 6332-6:1990 Thermal performance of domestic gas appliances - Specification for thermal performance of combined appliances: fanned-circulation ducted-air heater/circulator
• BS ISO/TR 12391-3:2002 Gas cylinders. Refillable seamless steel. Performance tests - Fracture performance tests. Cyclical burst tests
• BS EN 13793:2003 Thermal insulating products for building applications - Determination of behaviour under cyclic loading
• BS EN 1397:2015 Heat exchangers. Hydronic room fan coil units. Test procedures for establishing the performance
• BS EN 1397:1999 Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance
• BS EN ISO 17463:2022 Paints and varnishes. Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
• BS ISO 13003:2004 Fibre-reinforced plastics - Determination of fatigue properties under cyclic loading conditions
• BS ISO 13003:2003 Fibre-reinforced plastics. Determination of fatigue properties under cyclic loading conditions
• BS EN IEC 61753-091-02:2022 Fibre optic interconnecting devices and passive components. Performance standard - Non-connectorized 3-port incompletely circulated single-mode fibre optic circulators for category C. Controlled environments
• BS ISO/TR 12391-3:2003 Gas cylinders - Refillable seamless steel - Performance tests - Fracture performance tests - Cyclical burst tests
• BS EN 14371:2004 Surface active agents - Determination of foamability and degree of foamability - Circulation test method
• 21/30423352 DC BS EN ISO 17463. Paints and varnishes. Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
• BS EN ISO 17463:2014 Paints and varnishes. Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
• BS ISO 19455-1:2019 Planning for functional performance testing for building commissioning - Secondary hydronic pump, system and associated controls
• BS ISO 16745:2015 Environmental performance of buildings. Carbon metric of a building. Use stage
• 21/30403940 DC BS EN 16306. Natural stone test methods. Determination of resistance of marble to thermal and moisture cycles
• BS EN 60601-2-30:2000 Medical electrical equipment. Particular requirements for safety. Particular requirements for safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment
• BS EN 61753-091-2:2013 Fibre optic interconnecting devices and passive components. Performance standard. Non-connectorized single-mode fibre optic pigtailed circulators for category C Controlled environment
• BS EN 1148:1999 Heat exchangers - Water-to-water heat exchangers for district heating - Test procedures for establishing the performance data
• BS EN 14868:2005 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems
• BS EN 16306:2022 Tracked Changes. Natural stone test methods. Determination of resistance of marble to thermal and moisture cycles
• BS EN 1216:1999 Heat exchangers. Forced circulation air-cooling and air-heating coils. Test procedures for establishing the performance
• 20/30409060 DC BS EN 1397. Heat exchangers. Hydronic room fan coil units. Test procedures for establishing the performance
• 22/30446471 DC BS ISO 23369. Hydraulic fluid power. Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions
• 20/30347205 DC BS ISO 23369. Hydraulic fluid power. Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions
• BS ISO 18589-3:2015 Measurement of radioactivity in the environment. Soil. Test method of gamma-emitting radionuclides using gamma-ray spectrometry
• BS ISO 23369:2022 Tracked Changes. Hydraulic fluid power. Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions
• BS EN 1397:2021 Tracked Changes. Heat exchangers. Hydronic room fan coil units. Test procedures for establishing the performance
• BS EN 61000-6-4:2007+A1:2011 Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
• BS EN IEC 61000-6-4:2019 Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
• BS EN ISO 18589-3:2017 Measurement of radioactivity in the environment. Soil. Test method of gamma-emitting radionuclides using gamma-ray spectrometry
• BS IEC 62977-2-2:2020 Electronic displays - Measurements of optical characteristics. Ambient performance
• BS EN 2591-609:2005 Elements of electrical and optical connection — Test methods — Part 609: Optical elements — Effectiveness of cable attachment — Cable cyclic flexing
• BS EN 2591-609:2006 Aerospace series. Elements of electrical and optical connection. Test methods. Optical elements. Effectiveness of cable attachment. Cable cyclic flexing
• BS EN 61753-091-3:2004 Fibre optic interconnecting devices and passive components performance standards - Performance standard - Single-mode fibre optic pigtailed style circulators for category U. Uncontrolled environment
• 16/30351483 DC PD IEC/TS 62933-4-1. Electric Energy Storage System. Part 4-1. Guidance On Environmental Issues
• 22/30437195 DC BS IEC 62047-43. Semiconductor devices. Micro-electromechanical devices - Part 43. Test method of electrical characteristics after cyclic bending deformation for flexible electro-mechanical devices
• PD IEC/TR 60216-7-2:2016 Electrical insulating materials. Thermal endurance properties. Results of the round robin tests to validate procedures of IEC TS 60216-7-1 by non-isothermal kinetic analysis of thermogravimetric data
• BS 5724-3.129 Supplement No. 1:1994 Medical electrical equipment - Particular requirements for performance - Methods of declaring functional performance characteristics of radiotherapy simulators - Guide to functional performance values
• BS EN 61049:1993 Specification for capacitors for use in tubular fluorescent and other discharge lamp circuits - Performance requirements
• BS EN ISO 20836:2021 Microbiology of the food chain. Polymerase chain reaction (PCR) for the detection of microorganisms. Thermal performance testing of thermal cyclers
• BS EN 61168:1994 Medical electrical equipment - Particular requirements for performance - Methods of declaring functional performance characteristics of radiotherapy simulators
• 22/30453012 DC BS ISO 18589-3. Measurement of radioactivity in the environment. Soil - Part 3. Test method of gamma-emitting radionuclides using gamma-ray spectrometry
• BS EN 61753-092-6:2007 Fibre optic interconnecting devices and passive components performance standard - Non-connectorized single-mode circulators for category O. Uncontrolled environment and sequential test
• BS EN 61303:1997 Medical electrical equipment - Radionuclide calibrators - Particular methods for describing performance
• 20/30383484 DC BS EN ISO 20836. Microbiology of the food chain. Polymerase chain reaction (PCR) for the detection of food-borne pathogens. Thermal performance testing of thermal cyclers
• BS IEC 1000-2-6:1995 Electromagnetic compatibility (EMC). Environment - Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances
• BS IEC 62706:2012 Radiation protection instrumentation. Environmental, electromagnetic and mechanical performance requirements

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Cycle Performance Discharge

• IPC TM-650 5.5.4.5 Test Coupon C - Circuit Continuity, Temperature Cycling, Thermal Cycling, and Construction Integrity

IPC - Association Connecting Electronics Industries, Cycle Performance Discharge

• IPC TM-650 5.5.4.5-1998 Test Coupon C - Circuit Continuity@ Temperature Cycling@ Thermal Cycling@ and Construction Integrity

Professional Standard - Aviation, Cycle Performance Discharge

• HB 7505-1997 Energy Saving Monitoring of Air Circulation Electric Furnace

Association Francaise de Normalisation, Cycle Performance Discharge

• NF P50-511:1985 SOLAR ENERGY. SOLAR COLLECTORS USING HEAT TRANSFER LIQUID. SUITABILITY FOR USE.
• NF EN 61176:1994 Scies circulaires électroportatives alimentées sur le réseau - Méthodes de mesure de l'aptitude à la fonction
• NF X45-309:2000 Filter cartridges - Test methods - Resistance to flowrate cyclic variations.
• NF P50-502:1985 Solar energy. Solar collector using heat transfer liquid. Mechanical characteristics. Definitions. Testing.
• FD V03-112:2013 Produits alimentaires - Qualification des thermocycleurs pour le maintien de leurs performances - Mise en oeuvre des tests et indicateurs de performance
• NF M60-760:2001 Nuclear energy - Measurement of radioactivity in the environment - Air - Sampling of aerosols for measurement of radioactivity in the environment.
• NF EN 13793:2004 Produits isolants thermiques destinés aux applications du bâtiment - Détermination du comportement sous charge cyclique
• NF P75-429*NF EN 13793:2004 Thermal insulating products for building applications - Determination of behaviour under cyclic loading
• NF G45-011:1984 Dry cleaning equipment. Definitions and checking of characteristics specific ot a closed-circuit dry-cleaning machine.
• NF T60-174:1994 Produits de protection temporaire contre la corrosion - Évaluation des propriétés de protection contre la corrosion - Méthode de la chambre humide cyclique.
• NF EN IEC 62932-2-1:2020 Systèmes de production d'énergie de batteries d'accumulateurs à circulation d'électrolyte pour applications stationnaires - Partie 2-1 : exigences générales de performances et méthodes d'essai
• NF M60-760:2017 Nuclear Energy - Measurement of radioactivity in the environment - Air - Sampling of aerosols for measurement of radioactivity in the environment
• NF T73-426*NF EN 14371:2004 Surface active agents - Determination of foamability and degree of foamability - Circulation test method.
• NF E38-332*NF EN 1397:2021 Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance
• NF EN 1216:1999 Échangeurs thermiques - Batteries à ailettes à circulation forcée - Procédures d'essai pour la détermination des performances.
• NF EN 1216/A1:2003 Échangeurs thermiques - Batteries à ailettes à circulation forcée - Procédures d'essai pour la détermination des performances
• NF T34-559*NF EN ISO 17463:2022 Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
• NF EN ISO 17463:2022 Peintures et vernis - Lignes directrices pour la détermination des propriétés anticorrosives de revêtements organiques par une technique électrochimique cyclique accélérée
• NF M60-333:2011 Énergie nucléaire - Technologie du cycle du combustible - Déchets - Détermination de l'activité de l'iode 129 dans des effluents et déchets
• NF M60-759:2005 Nuclear energy - Measurement of environmental radioactivity - Air - Determination of the volumic activity of iodine in the atmospheric environment
• NF M60-803:2001 Nuclear energy - Measurement of radioactivity in the environment - Water - Measurement of radium 226 activity in water.
• NF P85-505:1972 Seals. Elastomer base mastics used for sealing. Determination of adhesivness-cohesion characteristics by cyclic tensile-compression tests.
• NF M60-808:2007 Nuclear energy - Measurement of the radioactivity in the environment - Water - Measurement of polonium 210 activity in water by alpha spectrometry.
• NF M60-321:2005 Nuclear energy - Nuclear fuel cycle technology - Waste - Non-intrusive, non-destructive determination of the tritium activity of a package containing tritiated waste by measurement of helium-3 leakage from the package
• NF T34-559:2014 Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by the accelerated cyclic electrochemical technique
• NF M60-801:1997 Nuclear energy. Measurement of environmental radioactivity. Water. Measurement of alpha activity index in terms of plutonium 239 equivalent in low salted water.
• NF M60-322:2005 Nuclear energy - Nuclear fuel cycle technology - Waste - Determination of iron 55 activity in effluents and waste by liquid scintillation after prior chemical separation.
• NF EN 61753-381-2:2016 Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 381-2 : réseau sélectif planaire cyclique - Catégorie C (environnement contrôlé)
• NF M60-770:2000 Nuclear energy - Measurment of environnemental radioactivity-Air - Determination of the activity concentration for atmospheric deposits on the soil.
• NF E48-675:1988 Hydraulic fluid power. Filter elements. Resistance to the fatigue due to cyclic flow variations.
• NF EN 61753-381-6:2016 Dispositifs d'interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 381-6 : réseau sélectif planaire cyclique - Catégorie O (environnement non contrôlé)
• NF M60-768:2002 Nuclear energy - Measurement of environmental radioactivity - Radon 222 : methods for estimation of the surfacic activity of exhalation by accumulation method.
• NF M60-800:1997 Nuclear energy. Measurement of environmental radioactivity. Water. Measurement of global beta activity index in terms of strontrium and yttrium 90 equivalent in low salted water.
• NF E38-331/A1*NF EN 1148/A1:2005 Heat exchangers - Water to water heat exchangers for district heating - Test procedures for establishing the performance data
• NF A05-414*NF EN 14868:2005 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems
• NF C93-909-381-2*NF EN 61753-381-2:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2 : cyclic arrayed waveguide grating - Category C (controlled environment)
• NF T70-527:2003 Energetic materials for defense - Safety, vulnerability - Sensitivity to electrostatic discharges
• NF T70-527:2013 Energetic materials for defense - Safety, vulnerability - Sensitivity to electrostatic discharges
• NF C74-388*NF EN 80601-2-30:2011 Medical electrical equipment - Part 2-30 : particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
• NF M60-806-1:2005 Nuclear energy - Measurement of radioactivity in the environment - Water - Part 1 : measurement of strontium 90 activity in water - Radiochemical separation of strontium by nitric acid and measurement of yttrium 90 beta activity.
• NF E48-707*NF ISO 23369:2021 Hydraulic fluid power - Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions
• NF M60-806-2:2005 Nuclear energy - Measurement of radioactivity in the environment - Water - Part 2 : measurement of strontium 90 activity in water - organic solvent extraction of yttrium 90 and measurement of beta activity.
• NF C93-909-381-6*NF EN 61753-381-6:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6 : cyclic arrayed waveguide grating - Category O (uncontrolled environment)
• NF M60-812-2:2006 Nuclear energy - Measurement of environmental radioactivity - Part 2 : measurement of carbon 14 activity by liquid scintillation in carbon matrices in the environment.
• NF E38-330/A1*NF EN 1216/A1:2003 Heat exchangers - Forced circulation air-cooling and air-heating coils - Test procedures for establishing the performance
• NF M60-805-5:2005 Nuclear energy - Measurement of environmental radioactivity - Water - Part 5 : measurement of the activity and concentration of uranium in water by alpha spectrometry.
• NF EN ISO 18589-6:2021 Mesurage de la radioactivité dans l'environnement - Sol - Partie 6 : mesurage des activités alpha globale et bêta globale - Méthode d'essai utilisant un compteur proportionnel à circulation gazeuse
• NF M60-765:1997 Nuclear energy. Air-measurement of radioactivity in the environment. Radon 222 : methods for spot measurement of alpha potential energy of radon daughters in the atmospheric environment.
• NF M60-769:2000 Nuclear energy - Measurement of environmental radioactivity - Radon 222 : methods for spot measurement of the volumic activity of radon in the atmospheric environment.
• NF EN ISO 18589-3:2018 Mesurage de la radioactivité dans l'environnement - Sol - Partie 3 : Méthode d'essai des radionucléides émetteurs gamma par spectrométrie gamma
• NF C91-081-2:1993 ELECTROMAGNETIC COMPATIBILITY. GENERIC EMISSION STANDARD. PART 2 : INDUSTRIAL ENVIRONMENT. (EUROPEAN STANDARD EN 50 081-2).
• NF T70-539:2009 Energetic materials for defence - Safety, vulnerability - Electrostatic discharges sensitivity test - GEMO apparatus
• NF C93-909-091-2*NF EN 61753-091-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 091-2 : non-connectorised single-mode fibre optic pigtailed circulators for category C - Controlled environment
• NF M60-812-1:2006 Nuclear Energy - Measurement of environmental radioactivity - Part 1 : guide for the measurement of airborne C14 volumetric activity from an atmospheric sample.
• NF L54-002-609*NF EN 2591-609:2006 Aerospace series - Elements of electrical and optical connection - Test methods - Part 609 : optical elements - Effectiveness of cable attachment - Cable cyclic flexing
• NF T70-540:2009 Energetic materials for defence - Safety, vulnerability - Electrostatic discharges sensitivity test SNPE apparatus
• NF C93-909-091-02*NF EN IEC 61753-091-02:2022 Fibre optic interconnecting devices and passive components - Performance standard - Part 091-02 : non-connectorized 3-port incompletely circulated single-mode fibre optic circulators for category C - Controlled environments
• NF M60-780-8:2001 Nuclear energy - Measurement of radioactivity in the environment - Bioindicators - Part 8 : glossary.
• NF M60-780-0:2001 Nuclear energy - Measurement of radioactivity in the environment - Bioindicators - Part 0 : general principles.
• NF V03-027*NF EN ISO 20836:2021 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers
• NF C93-400-9-5*NF EN IEC 60512-9-5:2020 Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5 : endurance tests - Test 9e : current loading, cyclic
• NF EN 61753-092-6:2008 Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 092-6 : circulateurs unimodaux non-connectorisés pour la catégorie O - Environnement non contrôlé et essai séquentiel
• NF C97-160-5*NF EN 60094-5:1994 Magnetic tape sound recording and reproducing systems. Part 5 : electrical magnetic tape properties.
• NF M60-801:2004 Nuclear energy - Measurement of environmental radioactivity - Water - Measurement of alpha activity index in terms of plutonium 239 equivalent in low salted water.
• NF EN ISO 20836:2021 Microbiologie de la chaîne alimentaire - Réaction de polymérisation en chaîne (PCR) pour la recherche de micro-organismes - Essais de performance thermique des thermocycleurs
• NF M60-807:2006 Nuclear Energy - Measurement of the radioactivity in the environement - Water - Measurement of lead 210 activity in water by gamma pectrometry.
• NF M60-790-3*NF EN ISO 18589-3:2018 Measurement of radioactivity in the environment - Soil - Part 3 : Test method of gamma-emitting radionuclides using gamma-ray spectrometry
• NF M60-803-2:2012 Nuclear energy - Measurement of radioactivity in the environment - Water - Part 2 : measurement of radium 226 activity in water - Method by coprecipitation and gamma spectrometry.
• NF M60-764:2004 Nuclear energy - Measurement of environmental radioactivity - Air - Radon 222 : methods for integrated measurement of the alpha potential energy of short-life decay products of radon in the atmospheric environment.
• NF M60-765:2004 Nuclear energy - Measurement of radioactivity in the enviromment - Air - Radon 222 : methods for spot measurement of the alpha potential energy of short-life decay products of radon in the atmospheric environnement.
• NF M60-764:1997 Nuclear energy. Air-Measurement of radioactivity in the environment-Air. Radon 222 : integrated methods for measurement of alpha potential energy of short life decay products of radon in the atmospheric environment.
• NF C71-243*NF EN 61049:1993 Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements.
• NF EN 61049:1993 Condensateurs destinés à être utilisés dans les circuits de lampes tubulaires à fluorescence et autres lampes à décharge - Prescriptions de performances
• NF M60-780-2:2001 Nuclear energy - Measurement of radioactivity in the environment - Bioindicators - Part 2 : guidance for sampling technicals.
• NF M60-790-4:1999 Nuclear energy. Measurement of radioactivity in the environment-Soil. Part 4 : methodology for soil samples dissolution.
• NF EN IEC 60512-9-5:2020 Connecteurs pour équipements électriques et électroniques - Essais et mesures - Partie 9-5 : essais d'endurance - Essai 9e : charge en courant, essai cyclique
• NF C93-909-092-6*NF EN 61753-092-6:2008 Fibre optic interconnecting devices and passive components performance standard - Part 092-6 : non-connectorized single-mode circulators for category O - Uncontrolled environment and sequential test.
• NF C93-909-091-3*NF EN 61753-091-3:2005 Fibre optic interconnecting devices and passive components performance standard - Part 091-3 : single-mode fibre optic pigtailed style circulators for category U - Uncontrolled environment
• NF EN 61753-091-3:2005 Norme de qualité de fonctionnement des dispositifs d'interconnexion et composants passifs à fibres optiques - Partie 091-3 : circulateurs à fibres optiques monomodes raccordés à une fibre amorce pour catégorie U - Environnement non contrôlé
• NF M60-806-3:2005 Nuclear energy - Measurement of radioactivity in the environment - Water - Part 3 : measurement of strontium 90 activity in water - Radiochemical separation of strontium by extraction with "ethers crown" resin and measurement of beta activity.
• NF EN 61303:1995 Appareils électromédicaux calibrateurs de radionucleides - Méthodes particulières pour décrire les performances
• NF M60-824:2020 Nuclear energy - Measurement of radioactivity in the environment - Test method for the analysis of tritium in free water and organically bound tritium in environmental matrices

CZ-CSN, Cycle Performance Discharge

• CSN 36 1174-1991 Electrical appliances for household use. Performance and construction of circulating electric fans and regulators
• CSN 34 5686-1980 Electrotechnical and radioelectronic equipment. Resistance tests against environmental effects. Salt mist tests. Cyclic regime
• CSN 36 7420-1968 Audio-low-frequency amplifiers for electroacoustics. Performance requirement
• CSN IEC 923:1993 Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements

中华人民共和国环境保护部, Cycle Performance Discharge

• GB 13695-1992 Authorized limits for normalized releases of radioactive effluents from nuclear fuel cycle

VN-TCVN, Cycle Performance Discharge

• TCVN 7329-2003 Performance of refrigerant recovery and/or recycling equipment
• TCVN 7469-2005 Radiation protection.Activity measurements of solid materials considered for recycling, re-use, or disposal as non-radioactive waste
• TCVN 7303-2-30-2010 Medical electrical equipment.Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers

Professional Standard - Electricity, Cycle Performance Discharge

• DL/T 964-2005 Performance test code for circulating fluidezed bed boiler
• DL/T 1426-2015 Steam turbines in combined cycles performance test codes
• DL/T 1116-2009 Standard test method for efficacy of microbicides used in cooling water system
• DL/T 1223-2013 Integrated gasification combined cycle power generation units performance acceptance test
• DL/T 1427-2015 Gas turbine heat recovery steam generators performance test codes
• DL/T 1224-2013 Performance acceptance test code for single shaft combined cycle power plant

Professional Standard - Energy, Cycle Performance Discharge

• DL/T 1116-2021 Performance Evaluation of Bactericides for Circulating Cooling Water
• NB/T 20139-2012 Technical criteria for environmental radioactivity background investigation for nuclear power plant
• NB/T 20182-2012 Technical specification for radiation environmental impact assessment of airborne radioactive material release in nuclear power plant accident conditions

GOSTR, Cycle Performance Discharge

• GOST ISO 11650-2017 Performance of refrigerant recovery and/or recycling equipment. Performance characteristics
• GOST R 58902-2020 Thermal insulating building products. Methods for determining properties under cyclic loading

AT-ON, Cycle Performance Discharge

• ONORM S 4073-1983 Cross country ski; -fatigue — Performance; cyclical loading lest
• ONORM B 3123 Teil.3-1990 Testing of natural stone; resistance to weathering; freeze-thaw-cyclic-test of aggregates
• ONORM B 3123 Teil.2-1990 Testing of natural stone; resistance to weathering; freeze-thaw-cyclic-test of rocks
• OENORM EN ISO 17463:2021 Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO/DIS 17463:2021)
• ONORM ENV 1148-1993 Heat exchangers. Water to water heat exchangers for district heating. Test procedures for establishing the performance data
• ONORM ENV 1216-1994 Heat exchangers. Forced circulation air-cooling and air-heating coils. Test procedures for establishing the performance

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Cycle Performance Discharge

• ASHRAE 3781-1994 Simulation and Performance Analysis of Triple-Effect Absorption Cycles
• ASHRAE AC-02-19-1-2002 Evaluation of an Internal Melt Ice-on-Coil Storage Tank During Partial Charging and Discharging Cycles
• ASHRAE 4260-1999 Performance of a Two-Cycle Refrigerator/Freezer Using HFC Refrigerants
• ASHRAE PH-97-3-1-1997 Improving the Performance of Ammonia-water Absorption Cycles Using Salt Additives and Membranes
• ASHRAE 4733-2004 Simulation and Performance Analysis of Lithium Bromide/Water for Absorption Heat Transformer Cycle Systems
• ASHRAE MN-00-5-1-2000 Implications of the Measured Performance of Variable Flow Pumping Systems in Geothermal and Water Loop Heat Pump Applications
• ASHRAE OR-05-1-2-2005 Air-Side Thermal-Hlydraulic Performance of Louvered-Fin@ Flat-Tube Heat Exchangers with Sequential Frost-Growth Cycles
• ASHRAE 4473-2001 Contribution of Internal Heat Exchanger to Transcritical R-744 Cycle Performance (International Journal of HVAC&R Research)
• ASHRAE MN-00-13-3-2000 Hydraulic-Powered Fan Coil for Advanced Hydronic Distribution Systems@ Part I: Thermal Performance and Energy Characterization of Conventional Fan-Coil Units
• ASHRAE 3700-1993 Cycle Performance Testing of Nonazeotropic Mixtures of HFC-143a/ HCFC-124 and HFC-32/HCFC -124 with Enhanced Surface Heat Exchangers
• ASHRAE MN-00-13-4-2000 Hydraulic-Powered Fan Coil for Advanced Hydronic Distribution Systems@ Part II: Thermal Performance and Energy Requirements of Modified Fan-Coil Units

Malaysia Standards, Cycle Performance Discharge

• MS 1220-2001 Performance and construction of electric circulation fans and regulators(first revision)

Danish Standards Foundation, Cycle Performance Discharge

• DS/ISO 11650:2002 Performance of refrigerant recovery and/or recycling equipment
• DS/EN 13793:2004 Thermal insulation products for building applications - Determination of behaviour under cyclic loading
• DS/INSTA 516:1987 Flexible intermediate dulk containers. Cyclic top lift performance, methods of test
• DS/EN 1397:1999 Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance
• DS/ENV 1216:1994 Heat exchangers. Forced circulation air-cooling and air-heating coils. Test procedures for establishing the performance
• DS/ENV 1397:1995 Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance
• DS/EN 14868:2005 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems
• DS/EN 1216/A1:2003 Heat exchangers - Forced circulation air-cooling and air-heating coils - Test procedures for establishing the performance
• DS/EN 1216:1999 Heat exchangers - Forced circulation air-cooling and air-heating coils - Test procedures for establishing the performance
• DS/EN 60512-9-5:2010 Connectors for electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic
• DS/EN 1055:1997 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
• DS/EN 61049:1996 Capacitors for use in tubular fluorescent and other discharge lamp circuits - Performance requirements
• DS/EN 61303:1998 Medical electrical equipment - Radionuclide calibrators - Particular methods for describing performance
• DS/CEN ISO/TS 20836:2005 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Performance testing for thermal cyclers

US-AAMA, Cycle Performance Discharge

• AAMA 920-2011 Specifications for Operating Cycle Performance of Side-Hinged Exterior Door Systems
• AAMA 505-1998 Dry Shrinkage And Composite Performance Thermal Cycling Test Procedure
• AAMA 909-2013 Voluntary Specification for Cycle Performance and Testing of Side-Hinged Exterior Door Multipoint Locking Hardware
• AAMA 909-2013/2500 Voluntary Specification for Cycle Performance and Testing of Side-Hinged Exterior Door Multipoint Locking Hardware

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Cycle Performance Discharge

• GB/T 33158-2016 Thermal insulating products for building applications—Determination of behaviour under cyclic loading
• GB/T 8117.4-2017 Rules for steam turbine thermal acceptance test—Part 4: Method D—Simplified performance test rules for steam turbine and its thermal cycle
• GB/T 20936.4-2017 Gas detectors for explosive atmospheres—Part 4：Performance requirements of open path detectors for flammable gases

American Society for Testing and Materials (ASTM), Cycle Performance Discharge

• ASTM C1512-01 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
• ASTM D4482-11(2021) Standard Test Method for Rubber Property—Extension Cycling Fatigue
• ASTM D4482-11(2017) Standard Test Method for Rubber Property—Extension Cycling Fatigue
• ASTM C1512-07 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
• ASTM C1512-10(2015) Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
• ASTM C1512-10 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
• ASTM C1512-10(2020) Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
• ASTM C1512-10(2015)e1 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
• ASTM D4863-10 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
• ASTM E1233-00 Standard Test Method for Structural Performance of Exterior Windows, Curtain Walls, and Doors by Cyclic Static Air Pressure Differential
• ASTM C1360-10 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
• ASTM E1886-05 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
• ASTM E1233-06 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
• ASTM E1233/E1233M-14(2021) Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
• ASTM E1233/E1233M-14 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
• ASTM D8462-22 Standard Test Method for Cyclic Plate Load Tests to Evaluate the Structural Performance of Roadway Test Sections with Geosynthetics
• ASTM E1886-02 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Storm Shutters Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
• ASTM G61-86(2003)e1 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
• ASTM E1886-04a Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
• ASTM E1886-04 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
• ASTM F2129-17b Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
• ASTM F2129-19 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
• ASTM F2129-17a Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
• ASTM F2129-15 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
• ASTM F2129-19a Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
• ASTM F2129-17 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices

未注明发布机构, Cycle Performance Discharge

• BS 6332-6:1990(1999) Thermal performance of domestic gas appliances — Part 6 : Specification for thermal performance of combined appliances : fanned - circulation ducted - air heater / circulator
• SAE J2594-2016 Recommended Practice To Design For Recycling Proton Exchange Membrane (PEM) Fuel Cell Systems
• BS EN 1216:1999(2003) Heat exchangers — Forced circulation air - cooling and air - heating coils — Test procedures for establishing the performance
• BS 1394-2:1987(2000) Stationary circulation pumps for heating and hot water service systems — Part 2 : Specification for physical and performance requirements
• BS EN 2591-609:2005(2006) Elements of electrical and optical connection — Test methods — Part 609 : Optical elements — Effectiveness of cable attachment — Cable cyclic flexing

Lithuanian Standards Office , Cycle Performance Discharge

• LST EN 13793-2004 Thermal insulating products for building applications - Determination of behaviour under cyclic loading
• LST EN 1397-2001 Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance
• LST EN 14868-2006 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems
• LST EN 1216-2001 Heat exchangers - Forced circulation air-cooling and air-heating coils - Test procedures for establishing the performance
• LST EN 1216-2001/A1-2003 Heat exchangers - Forced circulation air-cooling and air-heating coils - Test procedures for establishing the performance
• LST EN 1055-2002 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling

AENOR, Cycle Performance Discharge

• UNE-EN 13793:2008 Thermal insulating products for building applications - Determination of behaviour under cyclic loading
• UNE-EN 14868:2006 Protection of metallic materials against corrosion - Guidance on the assesment of corrosion likelihood in water circulation systems
• UNE-EN ISO 17463:2014 Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2014)
• UNE-EN 1216:1999 Heat exchangers - Forced circulation air-cooling and air-heating coils - Test procedures for establishing the performance
• UNE-EN 1216/A1:2003 Heat exchangers - Forced circulation air-cooling and air-heating coils - Test procedures for establishing the performance.
• UNE-EN 1055:1996 Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling
• UNE-EN 61049:1995 CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS. PERFORMANCE REQUIREMENTS.
• UNE-EN 61303:1997 MEDICAL ELECTRICAL EQUIPMENT. RADIONUCLEIDE CALIBATORS. PARTICULAR METHODS FOR DESCRIBING PERFORMANCE.

Society of Automotive Engineers (SAE), Cycle Performance Discharge

• SAE TS332-2-1987 TS332 Test for Electrical Connectors High Temperature Cyclic Endurance
• SAE J2594-2003 Recommended Practice To Design For Recycling Proton Exchange Membrane (PEM) Fuel Cell Systems

ESD - ESD ASSOCIATION, Cycle Performance Discharge

• TR5.5-03-2014 Electrostatic Discharge Sensitivity Testing – Very-Fast Transmission Line Pulse (VF-TLP) – Round Robin Analysis
• STM11.31-2012 Evaluating the Performance of Electrostatic Discharge Shielding Materials – Bags

Group Standards of the People's Republic of China, Cycle Performance Discharge

• T/CAS 502-2021 Analysis methods for performance of household and similar air circulation fans
• T/CEC 250-2019 Guidelines for benchmarking management of energy consumption indicators for gas-steam combined cycle generator sets
• T/CEC 171-2018 Lithium-ion battery cycle life requirements and rapid detection test methods for power energy storage
• T/CSTM 00962-2022 Evaluation method for spectrometer performance of spark discharge atomic emission

GM Daewoo, Cycle Performance Discharge

• GMKOREA EDS-T-7762-2011 Determination of the Resistance to Corrosion of Organic Coating Under Cycle Alternating Conditions

American National Standards Institute （ANSI), Cycle Performance Discharge

• ANSI/AHRI 420-2009 Performance Rating of Forced-Circulation Free-Delivery Unit Coolers for Refrigeration
• ANSI/DASMA 109-2001 Standard Method for Testing Sectional Garage Doors: Determination of Life Cycling Performance
• ANSI/ESD STM11.31-1994 Evaluating the Performance of Electrostatic Discharge Shielding Materials: Bags
• ANSI/ESD STM11.31-2006 For evaluation the performance of electrostatic discharge shielding materials - Bags
• ANSI/AHRI 550/590(I-P)-2012 Performance Rating of Water-Chilling and Heat Pump Water-Heating Packages Using the Vapor Compression Cycle
• ANSI/AHRI 550/590(I-P) with Addendum 1-2012 Performance Rating of Water-Chilling and Heat Pump Water-Heating Packages Using the Vapor Compression Cycle
• ANSI/DASMA 115-2005 Standard Method for Testing Garage Doors: Determination of Structural Performance Under Missile Impact and Cyclic Wind Pressure
• ANSI/TIA-571-B-2007 Telecommunications - Telephone Terminal Equipment - Electrical, termal, Mechanical Enviromental - Performance Requirements
• ANSI/TIA-571-C-2015 Telecommunications Communications Products Electrical@ Thermal and Mechanical Environmental Performance Requirements

Association of German Mechanical Engineers, Cycle Performance Discharge

• VDI 3561-1973 Operating test cyles for performance comparison and for the commissioning of stacker-cranes

BE-NBN, Cycle Performance Discharge

• NBN E 24-002
• NBN E 24-002-1976
• NBN C 72-969-1992
• NBN C 71-923-1992
• NBN C 71-921 ADD 1-1992
• NBN C 71-923 ADD 1-1992
• NBN-EN 61049-1993 Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements
• NBN C 23-101 ADD 1-1990 Electrical apparatus for potentially explosive atmospheres-increased safety "i"
• NBN C 23-102 ADD 2-1988 Electrical apparatus for potentially explosive atmospheres-increased safety "e"

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Cycle Performance Discharge

• AHRI 740-2015 Performance Rating of Refrigerant Recovery Equipment and Recovery/Recycling Equipment
• AHRI 420-2008 Performance Rating of Forced-Circulation Free-Delivery Unit Coolers for Refrigeration
• AHRI 551/591 SI-2011 Performance Rating Of Water-Chilling and Heat Pump Water-Heating Packages Using the Vapor Compression Cycle

国家林业和草原局, Cycle Performance Discharge

• LY/T 3041-2018 Test method for cyclic load performance of metal fastener connections in wooden structures

Defense Logistics Agency, Cycle Performance Discharge

• DLA QPL-49055-24-2006 CABLES, POWER, ELECTRICAL, (FLEXIBLE, FLAT, UNSHIELDED), (ROUND CONDUCTOR), GENERAL SPECIFICATION FOR
• DLA SMD-5962-90902 REV B-2011 MICROCIRCUIT, HYBRID, LINEAR, FET INPUT, CLOSED LOOP BUFFER AMPLIFIER
• DLA SMD-5962-87714 REV D-2010 MICROCIRCUIT, LINEAR, DUAL MATCHED HIGH PERFORMANCE OPERATIONAL AMPLIFIERS, MONOLITHIC SILICON
• DLA SMD-5962-96876 REV A-2009 MICROCIRCUIT, LINEAR, HIGH SLEW RATE, CLOSED-LOOP, BUFFER AMPLIFIER, MONOLITHIC SILICON

International Electrotechnical Commission (IEC), Cycle Performance Discharge

• IEC TR 62635:2012 Guidelines for end of life information provided by manufacturers and recyclers and for recyclability rate calculation of electrical and electronic equipment
• IEC 60879:1986/COR1:1992 Performance and construction of electric circulating fans and regulators; Corrigendum 1
• IEC 61049:1991/COR1:1992 Capacitors for use in tubular fluorescent and other discharge lamp circuits; performance requirements
• IEC 61049:1991 Capacitors for use in tubular fluorescent and other discharge lamp circuits; performance requirements
• IEC TR 63212:2020 Harmonization of environmental performance criteria for electrical and electronic products - Feasibility study
• IEC 61753-092-6:2007 Fibre optic interconnecting devices and passive components performance standard - Part 092-6: Non-connectorized single-mode circulators for category O - Uncontrolled environment and sequential test
• IEC 60512-9-5:2020 RLV Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic
• IEC 60923:1988 Ballasts for discharge lamps (excluding tubular fluorescent lamps); performance requirements
• IEC 61753-091-3:2004 Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single mode fibre optic pigtailed style circulators for category U - Uncontrolled environment
• IEC 61753-091-02:2022 Fibre optic interconnecting devices and passive components - Performance standard - Part 091-02: Non-connectorized 3-port incompletely circulated single-mode fibre optic circulators for category C - C
• IEC 61303:1994 Medical electrical equipment - Radionuclide calibrators - Particular methods for describing performance

European Committee for Standardization (CEN), Cycle Performance Discharge

• EN 14371:2004 Surface active agents - Determination of foamability and degree of foamability - Circulation test method
• FprEN ISO 17463:2021 Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO/FDIS 17463:2021)
• EN 14868:2005 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems
• DD ENV 1216-1993 Heat Exchangers - Forced Circulation Air-Cooling and Air-Heating Coils - Test Procedures for Establishing the Performance
• EN ISO 20836:2021 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers (ISO 20836:2021)
• EN ISO/TS 20836:2005 Microbiology of food and animal feeding stuffs - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Performance testing for thermal cyclers
• EN ISO 17463:2022 Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2022)
• HD 311.5 S1-1989 Magnetic tape sound recording and reproducing systems; part 5: electrical magnetic tape properties
• EN 2591-609:2005 Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing
• EN ISO 17463:2014 Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique

National Aeronautics and Space Administration (NASA), Cycle Performance Discharge

• NASA-TN-D-1574-1963 Fatigue behavior of materials under strain cycling in low and Intermediate life range

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI), Cycle Performance Discharge

• ARI 420-2008 Performance Rating of Forced-Circulation Free-Delivery Unit Coolers for Refrigeration

CH-SNV, Cycle Performance Discharge

• SN EN 1397-2021 Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance

German Institute for Standardization, Cycle Performance Discharge

• DIN EN 14371:2004 Surface active agents - Determination of foamability and degree of foamability - Circulation test method; German version EN 14371:2004
• DIN EN 1397:2022 Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance
• DIN EN ISO 17463:2022-05 Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2022); German version EN ISO 17463:2022
• DIN EN 1397:2020 Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance; German and English version prEN 1397:2020
• DIN EN 1397:2022-03 Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance; German version EN 1397:2021
• DIN EN IEC 61753-091-02:2023-06 Fibre optic interconnecting devices and passive components - Performance standard - Part 091-02: Non-connectorized 3-port incompletely circulated single-mode fibre optic circulators for category C - Controlled environments (IEC 61753-091-02:2022); Germ...
• DIN EN 14868:2005-11 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems; German version EN 14868:2005
• DIN EN 14868:2005 Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems; English version of DIN EN 14868:2005
• DIN EN ISO 17463:2021 Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO/DIS 17463:2021); German and English version prEN ISO 17463:2021
• DIN EN 61753-381-6:2016-11 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment) (IEC 61753-381-6:2016); German version EN 61753-381-6:2016
• DIN EN IEC 63215-2:2021-01 Endurance test methods for die attach materials applied to power electronics devices - Part 2: Temperature cycling test method and reliability performance index for Die attach materials applied to discrete type power electronic devices (IEC 91/1660/CD:...
• DIN EN 61049:1994 Capacitors for use in tubular fluorescent and other discharge lamp circuits; performance requirements (IEC 61049:1991, modified + Corrigendum 1992); German version EN 61049:1993
• DIN EN 2591-609:2006 Aerospace series - Elements of electrical and optical connection - Test methods - Part 609: Optical elements - Effectiveness of cable attachment - Cable cyclic flexing; German and English version EN 2591-609:2005
• DIN EN 61753-381-2:2016-11 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment) (IEC 61753-381-2:2016); German version EN 61753-381-2:2016
• DIN EN ISO 20836:2022-05 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers (ISO 20836:2021); German version EN ISO 20836:2021
• DIN EN 61753-092-6:2008 Fibre optic interconnecting devices and passive components performance standard - Part 092-6: Non-connectorized single-mode circulators for category O - Uncontrolled environment and sequential test (IEC 61753-092-6:2007); German version EN 61753-092-6:200
• DIN EN 61303:1996 Medical electrical equipment - Radionuclide calibrators - Particular methods for describing performance (IEC 61303:1994); German version EN 61303:1995
• DIN EN 61753-091-3:2005 Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single-mode fibre optic pigtailed style circulators for category U - Uncontrolled environment (IEC 61753-091-3:2004); German version EN 61753-091-3:2004
• DIN EN 61753-091-3:2005-04 Fibre optic interconnecting devices and passive components performance standard - Part 091-3: Single-mode fibre optic pigtailed style circulators for category U - Uncontrolled environment (IEC 61753-091-3:2004); German version EN 61753-091-3:2004
• DIN EN ISO 17463:2014 Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2014); German version EN ISO 17463:2014

Electronic Components, Assemblies and Materials Association, Cycle Performance Discharge

• ECA 186-2E-1978 Passive Electronic Component Parts, Test Methods for; Method 2: Moisture Resistance (Cycling)

SE-SIS, Cycle Performance Discharge

• SIS SS 84 40 16-1986 Flexible Intermediate Bulk Containers -Cyclic top lift performance, methods of test
• SIS SS-EN 60 923-1991 Ballasts for discharge lamps (excludingtubularfluorescent lamps) - Performance requirements

KR-KS, Cycle Performance Discharge

• KS M ISO 17463-2018 Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique
• KS C IEC TR 63212-2022 Harmonization of environmental performance criteria for electrical and electronic products — Feasibility study
• KS C IEC 61303-2018 Medical electrical equipment — Radionuclide calibrators — Particular methods for describing performance

ES-UNE, Cycle Performance Discharge

• UNE-EN ISO 17463:2022 Paints and varnishes - Guidelines for the determination of anticorrosive properties of organic coatings by accelerated cyclic electrochemical technique (ISO 17463:2022)
• UNE-EN IEC 61753-091-02:2022 Fibre optic interconnecting devices and passive components - Performance standard - Part 091-02: Non-connectorized 3-port incompletely circulated single-mode fibre optic circulators for category C - Controlled environments (Endorsed by Asociación Espa...
• UNE-EN 1397:2022 Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance
• UNE-ETS 300332 Ed2:2022 Heat exchangers - Hydronic room fan coil units - Test procedures for establishing the performance
• UNE-EN 61753-381-2:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment) (Endorsed by AENOR in June of 2016.)
• UNE-EN 61753-381-6:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment) (Endorsed by AENOR in June of 2016.)
• UNE-EN IEC 62442-2:2022 Energy performance of lamp controlgear - Part 2: Controlgear for discharge lamps (excluding low-pressure mercury fluorescent lamps) - Method of measurement to determine the efficiency of controlgear (Endorsed by Asociación Española de Normalización ...
• UNE-EN IEC 60512-9-5:2020 Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic (Endorsed by Asociación Española de Normalización in September of 2020.)
• UNE-EN 61049:1995 ERRATUM CAPACITORS FOR USE IN TUBULAR FLUORESCENT AND OTHER DISCHARGE LAMP CIRCUITS. PERFORMANCE REQUIREMENTS.
• UNE-EN ISO 20836:2022 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of microorganisms - Thermal performance testing of thermal cyclers (ISO 20836:2021)
• UNE-EN 61303:1997/AC:2016-07 Medical electrical equipment - Radionuclide calibrators - Particular methods for describing performance

RU-GOST R, Cycle Performance Discharge

• GOST R 54436-2011 Requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (with load) for humidity endurance cyclic tests
• GOST R 54436-2011(2019) Requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (with load) for humidity endurance cyclic tests
• GOST R 54437-2011 Requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for resistance to air pressure tests
• GOST R 54437-2011(2019) Requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for resistance to air pressure tests
• GOST 33845-2016 Polymer composites. Test method for fatigue properties under cyclic loading conditions
• GOST 24656-1981 Circulation frumps for first contour energy blocks of atomic power station with reactors VVER. Type, basic parameters and general requirements
• GOST R 50267.30-1999 Medical electrical equipment. Part 2. Particular requirements for safety of automatic cycling indirect blood pressure monitoring equipment
• GOST 30324.30-2002 Medical electrical equipment. Part 2. Particular requirements for the safety of automatic cycling indirect blood pressure monitoring equipment
• GOST IEC 61303-2011 Medical electrical equipment. Radionuclide calibrators. Particular methods for describing performance
• GOST R IEC 61303-1999 Medical electrical equipment. Radionuclide calibrators. Particular methods for describing performance
• GOST R 56758-2015 Composites. Method for assessing the current-voltage cycling stability at 90 °C of absorptive electrochromic coatings on sealed insulating glass units
• GOST R 56759-2015 Composites. Method current-voltage for assessing the cycling stability at room temperature of absorptive electrochromic coatings on sealed insulating glass units

JSAE - Society of Automotive Engineers of Japan@ Inc., Cycle Performance Discharge

• JASO T904-1998 Motorcycles - Four Stroke Cycle Gasoline Engine Oils - Friction Properties Test for the Clutch Systems
• JASO T904-2006 Motorcycles - Four-stroke cycle gasoline engine oils - Test procedure for friction property of clutch system

Electronic Industrial Alliance (U.S.), Cycle Performance Discharge

• EIA RS-186-2E-1978 STANDARD TEST METHODS FOR PASSIVE ELECTRONIC COMPONENT BARTS METHOD 2: MOISTURE RESISTANCE (CYCLING)

European Association of Aerospace Industries, Cycle Performance Discharge

• AECMA PREN 2591-F9-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part F9 - Optical Elements Effectiveness of Cable Attachment Cable Cyclic Flexing Edition P 1
• AECMA PREN 2591-609-1999 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part 609: Optical Elements Effectiveness of Cable Attachment Cable Cyclic Flexing Edition P 2

American Society of Mechanical Engineers (ASME), Cycle Performance Discharge

• ASME HST-1-1982 Performance Standard for Electric Chain Hoists

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Cycle Performance Discharge

• IEEE 820-1984 Standard Telephone Loop Performance Characteristics
• IEEE 820-2005 Standard Telephone Loop Performance Characteristics
• IEEE 973-1990 Standard Definitions of Switching System Performance in a Telecommunications Environment

Institute of Electrical and Electronics Engineers (IEEE), Cycle Performance Discharge

• IEEE Std 820-2005 IEEE Standard Telephone Loop Performance Characteristics
• ANSI/IEEE Std 820-1984 IEEE Standard Telephone Loop Performance Characteristics
• IEEE 820-2021 IEEE Standard Telephone Loop Performance Characteristics
• IEEE Std 820-2021 IEEE Standard Telephone Loop Performance Characteristics - Redline
• IEEE P820/D5, March 2021 IEEE Approved Draft Standard Telephone Loop Performance Characteristics

Standard Association of Australia （SAA）, Cycle Performance Discharge

• AS/NZS 4251.2:1999 Electromagnetic compatibility (EMC) - Generic emission standard - Industrial environments
• AS/NZS 4354:1995 Medical electrical equipment - Radionuclide calibrators - Particular methods for describing performance

(U.S.) Ford Automotive Standards, Cycle Performance Discharge

• FORD WSS-M2P177-B1-2011 PAINT PERFORMANCE, CHASSIS, MODERATE VISIBILITY, 10 CYCLE RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSS-M2P189-A1-2009 PLATING PERFORMANCE, 1 CYCLE APG/APG''''E'''' CORROSION, SHOWROOM VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***
• FORD WSS-M2P177-B2-2011 PAINT PERFORMANCE, CHASSIS, MODERATE VISIBILITY, 20 CYCLE RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on WSS-M2P177-B1)

US-HHS, Cycle Performance Discharge

• HHS 21 CFR PT 1020-2008 PERFORMANCE STANDARDS FOR IONIZING RADIATION EMITTING PRODUCTS

PL-PKN, Cycle Performance Discharge

• PN T86160-05-1991 Magnetjc tape sound recording and reproducing systems Electrical magnetic tape properties
• PN E93443-1992 Ballasts for discharge lamps (excluding tubular fluorescent lamps). Performance requirements

European Committee for Electrotechnical Standardization（CENELEC）, Cycle Performance Discharge

• EN 61753-381-2:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-2: Cyclic arrayed waveguide grating - Category C (controlled environment)
• EN 61753-381-6:2016 Fibre optic interconnecting devices and passive components - Performance standard - Part 381-6: Cyclic arrayed waveguide grating - Category O (uncontrolled environment)
• EN IEC 61753-091-02:2022 Fibre optic interconnecting devices and passive components - Performance standard - Part 091-02: Non-connectorized 3-port incompletely circulated single-mode fibre optic circulators for category C - Controlled environments
• EN IEC 60512-9-5:2020 Connectors for electrical and electronic equipment - Tests and measurements - Part 9-5: Endurance tests - Test 9e: Current loading, cyclic
• EN 61753-092-6:2007 Fibre optic interconnecting devices and passive components performance standard - Part 092-6: Non-connectorized single-mode circulators for category O - Uncontrolled environment and sequential test

Professional Standard - Medicine, Cycle Performance Discharge

• YY 0667-2008 Medical electrical equipment—Part 2-30:Particular requirements for the safety,including essential performance,of automatic cycling non-invasive blood pressure monitoring equipment
• YY/T 0695-2008 Standard test method for conducting cyclic potentiodynamic polarization measurements to determine the corrosion susceptibility of small lmplant devices
• YY/T 0840-2011 Medical electrical equipment.Radionuclide calibrators.Particular methods for describing performance

NL-NEN, Cycle Performance Discharge

• NEN 1876-1993 Air coolers. Determination of the performance of frosted air coolers with forced air circulation

United States Navy, Cycle Performance Discharge

• NAVY PPP-C-795 D NOTICE 2-2004 CUSHIONING MATERIAL, PACKAGING (FLEXIBLE CLOSED CELL PLASTIC FILM, FOR LONG DISTRIBUTION CYCLES) [Use In Lieu Of: NAVY PPP-C-00795]
• NAVY PPP-C-795 D-1994 CUSHIONING MATERIAL, PACKAGING (FLEXIBLE CLOSED CELL PLASTIC FILM, FOR LONG DISTRIBUTION CYCLES)

CENELEC - European Committee for Electrotechnical Standardization, Cycle Performance Discharge

• EN 60601-2-30:2000 Medical Electrical Equipment Part 2-30: Particular Requirements for the Safety@ Including Essential Performance@ of Automatic Cycling Non-Invasive Blood Pressure Monitoring Equipment
• EN 60923:1996 Auxiliaries for Lamps - Ballasts for Discharge Lamps (Excluding Tubular Flourescent Lamps) - Performance Requirements

Professional Standard - Electron, Cycle Performance Discharge

• SJ 816-1974 Methods of measurement for the resetting performance of glow discharge counting tubes
• SJ 3234-1989 Test method for dynamic relating to vacuum gas emission properties of electronic material
• SJ/Z 9008.8-1987 Measurement of electrical properties of microwave tubes--Part 9: Crossed-field amlifier tubes
• SJ/T 10550-1994 Test method for gas emission characteristics of colloidal graphite in vacuum for use in electron tube

Aerospace, Security and Defence Industries Association of Europe (ASD), Cycle Performance Discharge

• ASD-STAN PREN 4170-2006 Aerospace series Paints and varnishes Test method for measurement of resistance to cold crack temperature cycle (Edition P 1)

NZ-SNZ, Cycle Performance Discharge

• AS/NZS 4776.1.2:2008 Liquid-chilling packages using the vapour compression cycle Part 1.2: Method of rating and testing for performance-Testing
• AS/NZS 4776.1.1:2008 Liquid-chilling packages using the vapour compression cycle Part 1.1: Method of rating and testing for performance-Rating

(U.S.) Telecommunications Industries Association , Cycle Performance Discharge

• TIA-4953-A-2015 Telecommunications Communications Products Amplified Telephone Measurement Procedures and Performance Requirements
• TIA-571-B-2007 Telecommunications Telephone Terminal Equipment Electrical, Thermal, Mechanical Environmental Performance Requirements
• TIA-4953-2012 Telecommunications Telephone Terminal Equipment Amplified Telephone Measurement Procedures and Performance Requirements
• TIA-571-C-2015 Telecommunications Communications Products Electrical, Thermal and Mechanical Environmental Performance Requirements

TIA - Telecommunications Industry Association, Cycle Performance Discharge

• TIA-4953-B-2018 Telecommunications Communications Products Amplified Telephone Measurement Procedures and Performance Requirements
• TIA/EIA-470-B-1997 Telecommunications-Telephone Terminal Equipment - Performance and Compatibility Requirements for Telephone Sets with Loop Signalling

U.S. Military Regulations and Norms, Cycle Performance Discharge

• ARMY ADS-37 A-PRF-1996 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (E3) PERFORMANCE AND VERIFICATION REQUIREMENTS

Canadian Standards Association (CSA), Cycle Performance Discharge

• CAN/CSA-C22.2 NO.60601-2-30-2002 Medical Electrical Equipment – Part 2-30: Particular Requirements for the Safety, Including Essential Performance, of Automatic Cycling Non-Invasive Blood Pressure Monitoring Equipment (Second Edition)

ZA-SANS, Cycle Performance Discharge

• SANS 61049:1991 Capacitors for use in tubular fluorescent and other discharge lamp circuits - Performance requirements

Taiwan Provincial Standard of the People's Republic of China, Cycle Performance Discharge

• CNS 3765-51-2004 Safety of household and similar electrical appliances - Part 2: Particular requirements for stationary circulation pumps for heating and service water installations
• CNS 3765.51-2004 Safety of household and similar electrical appliances - Part 2: Particular requirements for stationary circulation pumps for heating and service water installations

US-CFR-file, Cycle Performance Discharge

• CFR 40-60.84-2014 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.84:Emission monitoring.

Professional Standard - Environmental Protection, Cycle Performance Discharge

• HJ 1149-2020 Determination of gamma radionuclides in ambient air aerosol by filter membrane pressing/gamma spectrometry

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Cycle Performance Discharge

• JEDEC JESD22B113A-2012 Board Level Cyclic Bend Test Method for Interconnect Reliability Characterization of SMT ICs for Handheld Electronic Products

IET - Institution of Engineering and Technology, Cycle Performance Discharge

• DES HIGH PERF AMP VOL 3-2010 Designing High-Performance Amplifiers (Analog Circuit Design Series: Volume 3)

Others:   Cycle discharge, Battery Discharge Performance, Cycle discharge, discharge performance, discharge performance, Charge and discharge performance, cycle performance, Cycle Performance Discharge, Circulating fluidized bed performance test, First charge and discharge performance, Capacitor discharge performance, Performance and structure of electric circulation fan and regulator, Cyclic Voltammetry Performance.