Hardness Testing

Hardness Testing, Total:478 items.

In the international standard classification, Hardness Testing involves: Road vehicle systems, Plastics, Testing of metals, Wood, sawlogs and sawn timber, Ferrous metals, Wood-based panels, Welding, brazing and soldering, Products of the textile industry, Powder metallurgy, Mechanical testing, Components for aerospace construction, Cutting tools, Rubber, Rubber and plastics products, Inks. Printing inks, Jewellery, Construction materials, Heat treatment, Seals, glands, Glass, Surface treatment and coating, Non-ferrous metals, Products of the chemical industry, Electronic display devices, Pipeline components and pipelines, Bearings, Paper and board, Materials for aerospace construction, Iron and steel products, Petroleum, petroleum products and natural gas handling equipment, Ceramics, Non-destructive testing, Road engineering.

CZ-CSN, Hardness Testing

CSN ISO 6506:1993 Metallic materials. Hardness test. Brinell test
CSN 22 4020-1981 Testing of the hardness by sand blasting method
CSN 99 4442-1989 Indenters for hardness testing machines Methods of verification
CSN 25 0258-1971 Verification of Vickers hardness testing machines
CSN 73 1373-1981 Testing of concrete by hardness testing methods
CSN 03 8159-1989 Microhardness tests of metallic coatings
CSN 99 4441-1989 Indenters for hardness testing machines. General technical requirements
CSN 25 0264-1976 Diamond indenters for Vickers hardness testing machines
CSN 05 1313-1978 Weldahiliiy defini?ion and assessing. Wldrd joiiit hardness lest.
CSN 25 0261-1967 Verification of standardized blocks *tu be used for Vickers hardness testing machines
CSN 25 0259-1967 Verification of standardized blocks tu be used for Brinell hardness testing machines
CSN 42 0372-1981 Testing of metals Rockwell superficial harelness test (N and T scales)
CSN 25 0263-1976 Diamond indentors for Rockwell hardness testing machines
CSN 25 0270-1974 Verification of Rockwell superficial N and T scale hardness testing machines
CSN 72 2348-1983 Testing of caulking compounds for building purposes. Indentation hardness of elastomeric sealants by means of durometer by Shore a
CSN 05 1134-1987 Vickers hardncss test of welded joints of bars for concrete rcinforcement
CSN 25 0257-1967 Verification of Rockwell C, B and A scale hardness testing ^nachines
CSN 25 0270-1985 Rockwell hardness testing machines, scales N and I. Technical requirements. Methods of verification.
CSN ISO 410:1993 Metallic materials. Hardness test. Tables of brinell hardness values for use in tests made on flat surfaces
CSN 25 0260-1967 Verification of standardized blocks to be_ used for Rockwell B, C & A settle hardness testing machines
CSN 25 0271-1974 Calibration of standardized' blocks to be used for Rpckwell superficial N and T ?cale hardness testing machines
CSN ISO 6507-2:1993 Metallic materials. Hardness test. Vickers test. Part 2: HV 0,2 to less than HV 5
CSN ISO 6508:1993 Metallic materials. Hardness test. Rockwell test (Scales A-B-C-D-E-F-G-H-K)
CSN 22 4021 Za-1984 Czech National Standard 22 4021 ★ /ST SEV 1784-79 Grinding Tools. Hardness testing method. Ball extrusion

HU-MSZT, Hardness Testing

MNOSZ 22302-1955 Hardness testing, artificial hardness testing, Bolti hammer
MSZ 494-1967 Rubber hardness test
MSZ 104/5.lap-1961 Material testing machine mechanically controlled Rockwell hardness tester

Society of Automotive Engineers (SAE), Hardness Testing

SAE J417-1983 Hardness Tests and Hardness Number Conversions
SAE ARP5483/2-2003 Rolling Element Bearing Hardness Test
SAE AIR4738A-1998 Hardness Testing of Elastomeric O-Rings
SAE AIR4738A-2013 Hardness Testing of Elastomeric O-Rings
SAE AIR4738B-2020 Hardness Testing of Elastomeric O-Rings
SAE J864-1988 SURFACE HARDNESS TESTING WITH FILES

SAE - SAE International, Hardness Testing

SAE J417-2018 Hardness Tests and Hardness Number Conversions
SAE ARP5483/2A-2017 Rolling Element Bearing Hardness Test
SAE AIR4738-1992 Hardness Testing of Elastomeric O-Rings

GM North America, Hardness Testing

GM GM9053P-1989 Hardness Test and Hardness Number Conversions
GM GM9054P-1988 Microhardness Testing
GM GM9074P-1989 Hardness Testing - Correction for Rounds
GM GM9507P-1988 Thumbnail Hardness Test for Painted Parts

CL-INN, Hardness Testing

INDITECNOR 31-7ch-1956 Superficial Rockwell Hardness Test and Rockwell Hardness Test
INDITECNOR 31-6ch-1956 Brinell hardness testing in metallic materials

SE-SIS, Hardness Testing

SIS 11 25 12 E-1976 ROCKWELL HARDNESS TEST
SIS 11 25 12 E-1975 ROCKWELL HARDNESS TEST
SIS 11 01 70-1976 Sampling for hardness testing of metats
MNC 325 E-1984 Metallic materials - Hardness testing - Summary
MNC 325 E-1986 Metallic materials - Hardness testing - Summary
MNC 325-1984 Metallic materials - Hardness testing
MNC 325-1986 Metallic materials - Hardness testing - Summary
SIS 11 01 35 E-1965 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
SIS 11 01 38-1969 Sampling for tensile testing and hardness testing of non-ferrous metal sand castings
SIS SS 11 03 30-1980 Hardness testing — Brinell test — Testing machines grade 1,0 — Direct verification
SIS SS 11 01 35-1984 Grey cast iron - Sampling for tensile testing, hardness testing and microstructure control
SIS SS 11 01 36-1986 Cast iron - Spheroidal graphite cast kon - Sampling for tensile testing, impact testing, hardness testing and micrographic examination
SIS SS 11 01 37-1985 Cast iron - Malleable cast kon - Sampling for tensile testing, hardness testing and microstructure control
SIS SS 11 03 37-1987 Metallic materials - Hardness test - Calibration of standardized blocks to be used for Rockwell Hardness testing machines. Scales A-B-C-D-E-F- G-H-K

RO-ASRO, Hardness Testing

STAS 10703-1986 Testing of metals ROCKWELL HARDNESS TESTING (B, F, G SCALES)
STAS 10919-1978 Tests of metals HARDNESS TESTINGS Terminology
STAS 5540/5-1985 TESTS OF BUTT WELDED JOINTS Hardness test
STAS 12580-1987 Metals testing KNOOP TESTING OF HARDNESS
STAS 165-1983 Tests of metals BRINELL HARDNESS TEST
STAS 6869-1987 PARALLEL LATHES Testing of rigidity
STAS 9472/8-1975 Sintered hard alloys VICKERS HARDNESS TESTING
STAS 7925-1984 Testing of metals SAMPLES SETTING FOR HARDNESS TESTINGS
STAS 493-1988 Tests of metals ROCKWELL HARDNESS TEST A.C and D scales
STAS 11333-1979 THERMOSETTING PLASTICS Hardness determination by Barcol durometer
STAS 12181-1984 Tests of Metals HARI NESS TESTING NETHCD UNDER TEH WELDING SEAM
STAS 10023-1975 FLDXOBLE CELLULAR MATLRLALS Lardness tesling mdentation leenniques
STAS 10623-1976 MATERIALS FOR FRICTION LININGS Rockwell hardness test (L ; M; R ; S ; α scales)
SR ISO 4384-1:1994 Plain bearings - Hardness testing of bearing metals - Part 1: Compound materials
SR ISO 4384-2:1994 Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials
STAS 8251-1982 Testing of metals ROCKWELL HARDNKSS TKST ON CONVEX GURVED SURFACES A, B, C, F, G seals and superficial N and

ES-AENOR, Hardness Testing

INTA 11 05 21 Brinell hardness test

Indonesia Standards, Hardness Testing

SNI 06-0481-1989 Polypropylene hardness test
SNI 07-1861-1990 Test method for hardenability of steels
SNI 19-0405-1989 Brinell hardness test methods
SNI 08-0314-1989 Test method for stiffness of fabrics
SNI 19-0409-1989 Vickers hardness test methods
SNI 07-3696-1995 Method of taper hardness test in weld heat effected zone
SNI 07-3657-1995 Steel - Determination of total or effective thickness of hard surface layer
SNI 19-0720-1989 Rockwell N hardness test methods
SNI 19-0721-1989 Rockwell T hardness test methods
SNI 07-3695-1995 Test methods of maximum hardness in weld heat effected zone
SNI 07-3697-1995 Hardess test method welding metal deposit
SNI 03-1756-1990 Sand for mixture and concrete, Determination of hardness
SNI 03-1751-1990 Weak parts, organic substance, sand hardness, crushed stoned hardness, Determination
SNI 09-1256-1989 Brake lining for motor vehicles, Test method for gogan hardness
SNI 05-0719-1989 Micro Vickers hardness test method load from 0,0098 t0 49 N
SNI ISO 18517:2012 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
SNI 07-7177-2006 Plain bearings - Hardness tests of bearing metals - Part 1: Mixed materials
SNI 03-1757-1990 Crushed stones or natural gravels as foundation of road hardening and agregate for concrete, Determination of hardness by Rudellof pressure vesels

CU-NC, Hardness Testing

NC 05-02-1968 Hardenability test of steel
NC 04-10-1967 Brinell hardness tests for metals
NC 04-11-1968 Vickers hardness test for metals
NC 04-09-1966 Rockwel1 hardness tests forl metals

PT-IPQ, Hardness Testing

NP 141-1958 Metal. Hardness test
NP 106-1957 Metal. Brinell hardness test
E 182-1966 Metal. Vickers hardness test
NP EN 1043-2-2001 Destructive test on welds in metallic materials - Hardness test Part 2:Micro haedness testing on welded joints
NP EN 10109-1-1998 Metallic materials.Hardness test.Part 1:Rockwell test(scales A,B,C,D,E,F,G,H,K)and Rockwell superficial test(scales 15N,30N,45N,15T,30T and 45T)

Korean Agency for Technology and Standards (KATS), Hardness Testing

KS B 5532-1981 Rockwell T hardness test
KS B 0807-2009 Method of shore hardness test
KS F 2212-2004 Method of hardness test for wood
KS F 2212-1999 Method of hardness test for wood
KS F 2212-1985 Method of hardness test for wood
KS B 0807-2019 Method of shore hardness test
KS B 5540-2004 KNOOP HARDNESS TEST - TEST METHOD
KS B 0800-2001 Test methods for Vickers hardness at elevated temperatures
KS B 0826-2001 Destructive tests on welds in metallic materials-Hardness testing-Part 1:Hardness test on arc welded joints
KS M 6784-1994 Hardness testing methods for vulcanized rubber
KS M 6784-1999 Hardness testing methods for vulcanized rubber
KS B 0826-1985 Destructive tests on welds in metallic materials-Hardness testing-Part 1:Hardness test on arc welded joints
KS B 0805-2000 Metallic materials - Test method of brinell hardness
KS B 0806-2000 Metallic materials - Test method of rockwell hardness
KS B 0805-1983 Metallic materials - Test method of brinell hardness
KS B 0811-2003 Metallic materials－Vickers hardness test－Part 1：Test method
KS B 0811-1983 Metallic materials－Vickers hardness test－Part 1：Test method
KS B ISO 10250:2003 Metallic materials－Hardness testing－Tables of Knoop hardness values for use in tests made on flat surfaces
KS B 0893-2006 Testing method of maximum hardness in weld heat-affected zone
KS B 0893-2016 Testing method of maximum hardness in weld heat-affected zone
KS D 0032-2018 Titanium and titanium alloys — Brinell hardness test for titanium sponge
KS B 0893-1985 Testing method of maximum hardness in weld heat-affected zone
KS M 3387-2004 Testing method for Barcol hardness of glass fiber reinforced plastics
KS M 6784-2014 Hardness testing methods for rubber, vulcanized or thermoplastic
KS D 0295-2019 Visual inspection and hardness test for selective corrosion of alloys
KS D 8515-2020 Metallic and related coatings－Vickers and knoop microhardness tests
KS K 0538-2017 Test method for stiffness of fabrics：Heart loop test
KS K 0538-1982 Test method for stiffness of fabrics：Heart loop test
KS B ISO 9015-2:2017 Destructive tests on welds in metallic materials－Hardness testing－Part 2：Microhardness testing of welded joints
KS D ISO 4518:2012 Metallic coatings-Measurement of coating thickness-Profilometric method
KS L 1208-2005 TESTING METHOD FOR KNOOP INDENTATION HARDNESS OF CERAMIC WHITEWARES

FI-SFS, Hardness Testing

SFS 3479-1976 AINEENKOETUS. BRINELLIN KOVUUSKOE
SFS 3214-1976 Raw material testing. Wicks hardness test
SFS 3480-1976 Material testing. Rockwell Hardness Test for Steel (B-JAC-Grade)

AENOR, Hardness Testing

UNE 43721:1984 TESTING OF GLASS. KNOOP HARDNESS TEST
UNE 53270:2012 Plastics. Barcol hardness test.
UNE-EN 23878:2001 HARDMETALS. VICKERS HARDNESS TEST. (ISO 3878:1983).
UNE-EN ISO 4516:2002 Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests. (ISO 4516:2002)

British Standards Institution (BSI), Hardness Testing

BS EN ISO 6507-4:2018 Metallic materials. Vickers hardness test. Tables of hardness values
BS EN ISO 4545-4:2018 Metallic materials. Knoop hardness test. Table of hardness values
BS EN ISO 9015-2:2016 Destructive tests on welds in metallic materials. Hardness testing. Microhardness testing of welded joints
BS EN 1043-1:1996(1998) Destructive tests on welds in metallic materials . Hardness testing — Part 1 : Hardness test on arc welded joints
BS EN ISO 6508-1:2016 Metallic materials. Rockwell hardness test. Test method
BS EN ISO 4545-1:2018 Metallic materials. Knoop hardness test. Test method
BS EN ISO 6507-1:2018 Metallic materials. Vickers hardness test. Test method
BS EN ISO 22826:2021 Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
BS IEC 62715-6-3:2020 Flexible display devices - Mechanical test methods. Impact and hardness tests
BS EN ISO 6508-3:2023 Metallic materials. Rockwell hardness test - Calibration of reference blocks
BS EN ISO 6508-3:2015 Metallic materials. Rockwell hardness test. Calibration of reference blocks
BS EN ISO 6507-3:2018 Metallic materials. Vickers hardness test. Calibration of reference blocks
BS EN ISO 4545-3:2017 Metallic materials. Knoop hardness test. Calibration of reference blocks
BS EN ISO 16859-3:2015 Metallic materials. Leeb hardness test - Calibration of reference test blocks
BS ISO 4384-2:2022 Plain bearings. Hardness testing of bearing metals. Solid materials
BS EN ISO 6507-2:2018 Metallic materials. Vickers hardness test. Verification and calibration of testing machines
BS EN ISO 6506-2:2018 Metallic materials. Brinell hardness test. Verification and calibration of testing machines
BS EN ISO 4545-2:2017 Metallic materials. Knoop hardness test. Verification and calibration of testing machines
BS EN ISO 14271:2017 Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
BS ISO 18517:2008 Rubber, vulcanized or thermoplastic - Hardness testing - Introduction and guide
BS ISO 18517:2015 Rubber, vulcanized or thermoplastic. Hardness testing. Introduction and guide
BS ISO 4384-1:2019 Plain bearings. Hardness testing of bearing metals. Multilayer bearings materials
19/30388218 DC BS EN 1534. Wood flooring. Determination of resistance to indentation (Brinell). Test method
BS EN ISO 6508-2:2015 Metallic materials. Rockwell hardness test. Verification and calibration of testing machines and indenters
BS EN ISO 6508-2:2023 Metallic materials. Rockwell hardness test - Verification and calibration of testing machines and indenters
22/30445364 DC BS EN ISO 4545-1. Metallic materials. Knoop hardness test - Part 1. Test method
19/30352642 DC BS IEC 62715-6-3. Flexible display devices. Part 6-3. Mechanical test methods. Impact and hardness tests
22/30445434 DC BS EN ISO 6508-3. Metallic materials. Rockwell hardness test - Part 3. Calibration of reference blocks
21/30426790 DC BS ISO 4384-2. Plain bearings. Hardness testing of bearing metals. Part 2. Solid materials
23/30445360 DC BS EN ISO 6506-3. Metallic materials. Brinell hardness test - Part 3. Calibration of reference blocks
23/30445356 DC BS EN ISO 6506-2. Metallic materials. Brinell hardness test. Part 2. Verification and calibration of testing machines

IL-SII, Hardness Testing

S.I.722-1968 TESTING OF HARDNESS OF VULCANIZED RUBBER

(U.S.) Ford Automotive Standards, Hardness Testing

FORD FLTM EU-BO 054-1-2001 INDENTATION HARDNESS TEST FOR PLASTICS
FORD FLTM BP 106-04-2001 ELASTOMERIC MATERIALS MOUNTING FOR MICROHARDNESS TEST
FORD FLTM BN 123-1-2000 FIRMNESS TEST FOR PADDING MATERIALS (Replaces FLTM BN 023-01)
FORD FLTM BI 112-1-2001 SWARD HARDNESS TEST FOR PAINT FILM (Replaces FLTM BI 012-01, FLTM EU-BI 012-01)

GM Daewoo, Hardness Testing

GMKOREA EDS-T-4571-2011 Test Procedure of Surface Hardness
GMKOREA EDS-T-7775-2011 Thumbnail Hardness Test Method (3rd ed.; English/Korean)
GMKOREA EDS-T-4570-2011 Test Procedure of Hardness Distribution

Association Francaise de Normalisation, Hardness Testing

NF B51-125:1988 Panneaux à base de bois - Essai de dureté "Monnin"
NF B51-126:2007 Wood-based panels - Brinell hardness test
NF EN ISO 15184:2020 Paints and varnishes - Determination of film hardness using the pencil hardness test
NF ISO 9385:1991 Glass and glass ceramics - Knoop hardness test
NF EN ISO 3738-1:2010 Hard metals - Rockwell hardness test (A scale) - Part 1: test method
NF EN ISO 22557:2020 Paints and Varnishes - Manual Scratch Test with Hardness Test Pen
NF A89-568:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds.
NF A89-568*NF EN ISO 14271:2017 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
NF EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness testing
NF EN ISO 14271:2017 Resistance welding - Vickers hardness testing (reduced force and microhardness) on resistance spot, boss and seam welds
NF EN ISO 3738-2:2006 Hard metals - Rockwell hardness test (A scale) - Part 2: preparation and calibration of reference blocks

VDI - Verein Deutscher Ingenieure, Hardness Testing

VDI/VDE 2616 Blatt 1-2010 Haertepruefung an metallischen Werkstoffen
VDI/VDE 2616 Blatt 1-1994 Hardness testing of metallic materials
VDI/VDE 2616 Blatt 1-1991 Hardness testing of metallic materials
VDI/VDE 2616 Blatt 2-2000 Haertepruefung an Kunststoffen und Gummi
VDI/VDE 2616 Blatt 2-1986 Haertepruefung an Kunststoffen und Gummi
VDI/VDE 2616 Blatt 2-1996 Hardness testing of plastics and rubber
VDI/VDE 2616 Blatt 2-2012 Haertepruefung an Kunststoffen und Elastomeren

Danish Standards Foundation, Hardness Testing

DS/ISO 3878:1994 Hardmetals - Vickers hardness test
DS/EN ISO 22826:2021 Destructive tests on welds in metallic materials – Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
DS/EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
DS/EN ISO 14271/AC:2012 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
DS/EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests
DS/EN ISO 14705:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) – Test method for hardness of monolithic ceramics at room temperature (ISO 14705:2016)

IN-BIS, Hardness Testing

IS 12783-1989 Carbide - Vickers Hardness Test
IS 10166-1982 Calibration method for standard test blocks for calibrating hardness testing equipment

GSO, Hardness Testing

GSO ISO 3878:2015 Hardmetals -- Vickers hardness test
BH GSO ISO 3878:2017 Hardmetals -- Vickers hardness test
GSO 1466:2002 Metals hardness values tabels: test of tensile and hardness
OS GSO 1466:2002 Metals hardness values tabels: test of tensile and hardness
GSO ISO 4545-4:2013 Metallic materials -- Knoop hardness test -- Part 4: Table of hardness values
GSO ISO 642:2015 Steel -- Hardenability test by end quenching (Jominy test)
GSO ISO 9385:2021 Glass and glass-ceramics — Knoop hardness test
BH GSO ISO 9385:2022 Glass and glass-ceramics — Knoop hardness test
GSO ISO 18517:2014 Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide
OS GSO ISO 18517:2014 Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide
GSO ISO 4516:2013 Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests
OS GSO ISO 4516:2013 Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests
GSO ISO 4545-3:2013 Metallic materials – Knoop hardness test Part 3 : Calibration of reference blocks
OS GSO ISO 4545-3:2013 Metallic materials – Knoop hardness test Part 3 : Calibration of reference blocks
OS GSO ISO 6507-3:2010 Metallic materials - Vickers hardness test - Part 3 : Calibration of reference blocks
BH GSO ISO 4545-3:2015 Metallic materials – Knoop hardness test Part 3 : Calibration of reference blocks
GSO ISO 6506-3:2010 Metallic materials -Brinell hardness test - Part 3: Calibration of reference blocks
GSO ISO 6507-3:2010 Metallic materials - Vickers hardness test - Part 3 : Calibration of reference blocks
BH GSO ISO 4384-2:2016 Plain bearings -- Hardness testing of bearing metals -- Part 2: Solid materials
OS GSO ISO 4384-2:2015 Plain bearings -- Hardness testing of bearing metals -- Part 2: Solid materials
GSO ISO 4545-2:2013 Metallic materials -- Knoop hardness test -- Part 2: Verification and calibration of testing machineses
GSO ISO 48-9:2021 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 9: Calibration and verification of hardness testers
BH GSO ISO 48-9:2022 Rubber, vulcanized or thermoplastic — Determination of hardness — Part 9: Calibration and verification of hardness testers
BH GSO ISO 4384-1:2017 Plain bearings -- Hardness testing of bearing metals -- Part 1: Multilayer bearings materials
OS GSO ISO 4384-1:2015 Plain bearings -- Hardness testing of bearing metals -- Part 1: Multilayer bearings materials
GSO ISO 4384-1:2015 Plain bearings -- Hardness testing of bearing metals -- Part 1: Multilayer bearings materials
GSO ISO 3738-2:2009 Hard metals - Rockwell hardness test (Scale A) - Part 2: Preparation and calibration of standard test blocks

Japanese Industrial Standards Committee (JISC), Hardness Testing

JIS K 7202-2:2001 Plastics -- Determination of hardness -- Part 2: Rockwell hardness
JIS P 8143:1996 Paper -- Determination of stiffness by Clark stiffness tester

YU-JUS, Hardness Testing

JUS M.Z0.501-1987 Verification of Brinell hardness testing machines
JUS M.Z0.502-1987 Verification of Vickers hardness testing machines HV02 to HV 100
JUS M.C3.325-1988 Plain bearings. Hardness testing of bearing metals. Solid materials
JUS M.C3.326-1988 Plain bearings. Hardness testlng of bearlng materials. Compound materials
JUS M.Z0.503-1980 Verification of Rockwell hardness testing machines

TR-TSE, Hardness Testing

TS 140-1964 ROCKVVELL HARDNESS TEST FOR METAL?C MATERIALS
TS 139-1964 BR?NELL TESTING OF METALLIC MATERIALS
TS 2875-1977 Vulcanized Rubbers of Low Hardness (10 To 35IRHD) Determination of Hardness
TS 2876-1977 Vulcanized Rubbers Of High Hardness (85 To 100 IRHD) Determination Of Hardness

European Committee for Standardization (CEN), Hardness Testing

EN 10109-1:1994 Metallic Materials - Hardness Test - Part 1: Rockwell Test (Scales A, B, C, D, E, F, G, H, K) and Rockwell Superficial Test (Scales 15N, 30N, 45N, 15T, 30T and 45T)
EN ISO 9015-2:2016 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints
EN 10003-1:1994 Metallic Materials - Brinell Hardness Test - Part 1: Test Method
EN ISO 4545-1:2023 Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2023)
EN ISO 6507-1:2023 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2023)
EN ISO 6508-1:2023 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2023)
prEN ISO 6506-1 Metallic materials - Brinell hardness test - Part 1: Test method (ISO/DIS 6506-1:2023)
EN ISO 6508-3:2023 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2023)
EN ISO 9015-2:2011 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints
prEN ISO 6506-3 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO/DIS 6506-3:2023)
EN 1043-1:1995 Destructive Tests on Welds in Metallic Materials - Hardness Testing - Part 1: Hardness Test on Arc Welded Joints
prEN ISO 6506-2 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO/DIS 6506-2:2023)

RU-GOST R, Hardness Testing

GOST R 52587-2006 Abrasive tools. Designations and hardness test methods
GOST R IEC 62715-6-3-2021 Flexible display devices. Part 6-3. Mechanical test methods. Impact and hardness tests

Association of German Mechanical Engineers, Hardness Testing

VDI/VDE 2616 Blatt 2-2014 Hardness testing of plastics and elastomers

未注明发布机构, Hardness Testing

DIN EN 1043-2:1996 Destructive testing of welded joints on metallic materials Hardness testing DIN Part 2: Microhardness testing on welded joints
ASTM RR-B09-1016 1992 B0294-Test Method for Hardness Testing of Cemented Carbides
ASTM RR-E28-1021 2004 E0018-Test Methods for Rockwell Hardness of Metallic Materials
ASTM RR-E04-1007 2010 E0384-Test Method for Microindentation Hardness of Materials
AS/NZS 1462.22:1997
DIN EN ISO 6507-3 Bei 1:1998 Metallic materials – Hardness test according to Vickers – Part 3: Calibration of hardness reference plates
ASTM RR-D01-1160 2011 D7735-Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures
DIN EN ISO 6507-3:1998 Metallic materials hardness testing according to Vickers DIN Part 3: Calibration of hardness reference plates
DIN EN ISO 6507-1:1998 Metallic materials - Vickers hardness test - Part 1: Test method
DIN EN ISO 6507-2:1998 Metallic materials Hardness test according to Vickers Part 2: Testing the testing machines
DIN EN ISO 6507-1 E:2016-08 Vickers Hardness Testing of Metallic Materials Part 1: Test Method (Draft)
DIN EN ISO 6507-1 E:2022-08 Vickers Hardness Testing of Metallic Materials Part 1: Test Method (Draft)
ASTM RR-A01-1003 2013 A1038-Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM RR-A01-1002 2010 A1038-Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
DIN EN ISO 4545-1 E:2015-05 Testing of metallic materials according to Knoop hardness Part 1: Test methods (draft)
DIN EN ISO 4545-1 E:2022-08 Testing of metallic materials according to Knoop hardness Part 1: Test methods (draft)
DIN ISO 48-9 E:2020-08 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers
DIN 50159-1 E:2013-06 Metallic materials - Hardness testing with the UCI method - Part 1: Test method
DIN 50159-1 E:2021-11 Metallic materials - Hardness testing with the UCI method - Part 1: Test method
ASTM RR-D19-1125 1986 D1126- Test Method for Hardness in Water
DIN ISO 4384-1 E:2020-08 Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials
DIN ISO 4384-1 E:2013-05 Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials
DIN EN ISO 9015-2 E:2015-04 Destructive testing of welding of metallic materials Hardness testing Part 2: Microhardness testing of welded joints (draft)
DIN 50159-2 E:2013-06 Metallic materials - Hardness testing with the UCI method - Part 2: Verification and calibration of the testing devices
DIN 50159-2 E:2021-11 Metallic materials - Hardness testing with the UCI method - Part 2: Verification and calibration of the testing devices

Lithuanian Standards Office , Hardness Testing

LST EN 23878-2000 Hardmetals - Vickers hardness test (ISO 3878:1983)
LST EN ISO 9015-2:2011 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2003)
LST EN ISO 22826:2021 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
LST EN ISO 14271:2011 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2011)
LST EN ISO 4516:2002 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002)
LST EN ISO 14271:2011/AC:2012 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds - Technical Corrigendum 1 (ISO 14271:2011/Cor.1:2012)

ES-UNE, Hardness Testing

UNE-EN ISO 9015-2:2016 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016)
UNE-EN ISO 4545-4:2018 Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2017)
UNE-EN ISO 6507-4:2018 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018)
UNE-EN ISO 22826:2021 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
UNE-EN ISO 7784-3:2016 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016)
UNE-EN 15269-3:2016 Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016)
UNE-EN ISO 16859-1:2016 Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015)
UNE-EN ISO 6507-1:2018 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2018)
UNE-EN ISO 4545-1:2018 Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2017)
UNE-EN ISO 6508-1:2017 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
UNE-EN ISO 14271:2018 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
UNE-EN ISO 4545-3:2018 Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2017)
UNE-EN ISO 6508-3:2015 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015)
UNE-EN ISO 6507-3:2018 Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018)
UNE-EN ISO 16859-3:2016 Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks (ISO 16859-3:2015)
UNE-EN ISO 6506-2:2019 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2017)
UNE-EN ISO 4545-2:2018 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2017)
UNE-EN ISO 6507-2:2018 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018)
UNE-EN ISO 16859-2:2016 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015)
UNE-EN ISO 6508-2:2015 Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015)
UNE-EN ISO 14705:2021 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature (ISO 14705:2016) (Endorsed by Asociación Española de Normalización in March of 2021.)

American National Standards Institute （ANSI), Hardness Testing

ANSI/ASTM E92:1982 Test Method for Vickers Hardness of Metallic Materials
ANSI/ASTM E448:1982 Practice for Scleroscope Hardness Testing of Metallic Materials
ANSI/ASTM E10:2001 Test Method for Brinell Hardness of Metallic Materials
ANSI/ASTM E1842:1996 Test Method for Macro-Rockwell Hardness Testing of Metallic Materials
ANSI/ASTM C886:2010 Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
ANSI/ASTM A833:1996 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

Group Standards of the People's Republic of China, Hardness Testing

T/XAI 9-2021 The test method for solder resist hardness of COF
T/SZS 4018-2020 Hardness test method of precious metal jewelry Vickers hardness test method

German Institute for Standardization, Hardness Testing

DIN EN ISO 6506-4:2015-02 Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2014); German version EN ISO 6506-4:2014
DIN EN ISO 6507-4:2018-07 Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018); German version EN ISO 6507-4:2018
DIN EN ISO 4545-4:2018-05 Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2017); German version EN ISO 4545-4:2018
DIN 51917:2002-12 Testing of carbonaceous materials - Rockwell hardness test - Ball indentation method; Solid materials
DIN EN ISO 22826:2021-05 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005); German version EN ISO 22826:2021
DIN EN ISO 16859-1:2016-02 Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015); German version EN ISO 16859-1:2015
DIN EN ISO 4545-1:2019-09 Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2017); German version EN ISO 4545-1:2018 / Note: To be replaced by DIN EN ISO 4545-1 (2022-08).
DIN EN ISO 3738-1:2010-08 Hardmetals - Rockwell hardness test (scale A) - Part 1: Test method (ISO 3738-1:1982); German version EN ISO 3738-1:2010
DIN 50159-1:2022-06 Metallic materials - Hardness testing with the UCI method - Part 1: Test method
DIN EN ISO 14271:2018-01 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017); German version EN ISO 14271:2017
DIN ISO 9385:1991-01 Glass and glass-ceramics; Knoop hardness test; identical with ISO 9385:1990
DIN ISO 48-9:2021-02 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers (ISO 48-9:2018)
DIN ISO 4384-2:2014-07 Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials (ISO 4384-2:2011)
DIN EN ISO 6507-3:2018-07 Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018); German version EN ISO 6507-3:2018
DIN EN ISO 6508-3:2015-06 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015); German version EN ISO 6508-3:2015 / Note: To be replaced by DIN EN ISO 6508-3 (2022-12).
DIN EN ISO 4545-3:2018-07 Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2017); German version EN ISO 4545-3:2018
DIN EN ISO 4516:2002-10 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002); German version EN ISO 4516:2002
DIN EN ISO 6508-3:2022-12 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO/DIS 6508-3:2022); German and English version prEN ISO 6508-3:2022 / Note: Date of issue 2022-11-18*Intended as replacement for DIN EN ISO 6508-3 (2015-06).
DIN EN ISO 6506-3:2015-02 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2014); German version EN ISO 6506-3:2014
DIN EN ISO 16859-3:2016-02 Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks (ISO 16859-3:2015); German version EN ISO 16859-3:2015
DIN EN ISO 6506-1:2015 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
DIN EN ISO 4545-1:2024-01 Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2023); German version EN ISO 4545-1:2023
DIN EN ISO 6507-1:2024 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2023)
DIN EN ISO 4545-1:2024 Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2023)
DIN 50159-1:2022 Metallic materials - Hardness testing with the UCI method - Part 1: Test method
DIN EN ISO 6507-1:2022-08 Metallic materials - Vickers hardness test - Part 1: Test method (ISO/DIS 6507-1:2022); German and English version prEN ISO 6507-1:2022 / Note: Date of issue 2022-07-15*Intended as replacement for DIN EN ISO 6507-1 (2018-07).
DIN EN ISO 4545-1:2022-08 Metallic materials - Knoop hardness test - Part 1: Test method (ISO/DIS 4545-1:2022); German and English version prEN ISO 4545-1:2022 / Note: Date of issue 2022-07-08*Intended as replacement for DIN EN ISO 4545-1 (2019-09).
DIN EN ISO 14271:2018 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
DIN ISO 4384-1:2021-08 Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials (ISO 4384-1:2019)
DIN EN ISO 4545-2:2018-07 Metallic materials - Knoop hardness test - Part 2: Verification and calibration of testing machines (ISO 4545-2:2017); German version EN ISO 4545-2:2018
DIN EN ISO 16859-2:2016-02 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015); German version EN ISO 16859-2:2015
DIN EN ISO 3738-2:2006-06 Hardmetals - Rockwell hardness test (scale A) - Part 2: Preparation and calibration of standard test blocks (ISO 3738-2:1988); German version EN ISO 3738-2:2006
DIN 50159-2:2022-06 Metallic materials - Hardness testing with the UCI method - Part 2: Verification and calibration of the testing devices
DIN EN ISO 6508-3:2024-04 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2023); German version EN ISO 6508-3:2023
DIN ISO 48-9:2021 Rubber, vulcanized or thermoplastic - Determination of hardness - Part 9: Calibration and verification of hardness testers (ISO 48-9:2018)
DIN EN ISO 6506-3:2023-11 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO/DIS 6506-3:2023); German and English version prEN ISO 6506-3:2023 / Note: Date of issue 2023-10-13*Intended as replacement for DIN EN ISO 6506-3 (2015-02).
DIN EN ISO 6506-3:2023 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO/DIS 6506-3:2023); German and English version prEN ISO 6506-3:2023
DIN EN ISO 14705:2021-04 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature (ISO 14705:2016); German version EN ISO 14705:2021
DIN ISO 4384-1:2021 Plain bearings - Hardness testing of bearing metals - Part 1: Multilayer bearings materials (ISO 4384-1:2019)
DIN 50158-1:2008-07 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 1: Test method
DIN 50159-2:2022 Metallic materials - Hardness testing with the UCI method - Part 2: Verification and calibration of the testing devices
DIN 50157-1:2020-11 Metallic materials - Hardness testing with portable measuring devices operating with mechanical penetration depth - Part 1: Test method

SCC, Hardness Testing

DANSK DS/EN ISO 6506-4:2014 Metallic materials – Brinell hardness test – Part 4: Table of hardness values
AENOR UNE-EN ISO 9015-2:2016 Destructive tests of welds on metallic materials. Hardness test. Part 2: Microhardness test on welded joints. (ISO 9015-2:2016).
NS-EN ISO 22826:2021 Destructive tests on welds in metallic materials — Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
DANSK DS/EN ISO 22826:2021 Destructive tests on welds in metallic materials – Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)
DIN EN ISO 9015-2 E:2015 Draft Document - Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO/DIS 9015-2:2015); German and English version prEN ISO 9015-2:2015
NS-EN ISO 6507-4:2018 Metallic materials — Vickers hardness test — Part 4: Tables of hardness values (ISO 6507-4:2018)
NS-EN ISO 4545-4:2018 Metallic materials — Knoop hardness test — Part 4: Table of hardness values (ISO 4545-4:2017)
NS-EN ISO 6506-4:2014 Metallic materials — Brinell hardness test — Part 4: Table of hardness values (ISO 6506-4:2014)
AENOR UNE-EN ISO 6507-4:2018 Metal materials. Vickers hardness test. Part 4: Table of hardness values. (ISO 6507-4:2018).
AENOR UNE-EN ISO 4545-4:2018 Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO 4545-4:2017)
DANSK DS/EN ISO 4545-4:2018 Metallic materials – Knoop hardness test – Part 4: Table of hardness values (ISO 4545-4:2017)
DANSK DS/EN ISO 6507-4:2018 Metallic materials – Vickers hardness test – Part 4: Tables of hardness values (ISO 6507-4:2018)
DANSK DS/EN ISO 6506-1:2014 Metallic materials – Brinell hardness test – Part 1: Test method
DANSK DS/EN ISO 6508-1:2016 Metallic materials – Rockwell hardness test – Part 1: Test method
DANSK DS/EN ISO 3738-1:2010
DIN EN ISO 6507-4 E:2016 Draft Document - Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO/DIS 6507-4:2016); German and English version prEN ISO 6507-4:2016
DIN EN ISO 6506-4 E:2013 Draft Document - Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO/DIS 6506-4:2013); German version prEN ISO 6506-4:2013
DIN ISO 18898 E:2016 Draft Document - Rubber - Calibration and verification of hardness testers (ISO 18898:2016); Text in German and English
DANSK DS/EN ISO 14271/AC:2011 Resistance welding – Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
DIN EN ISO 4545-4 E:2015 Draft Document - Metallic materials - Knoop hardness test - Part 4: Table of hardness values (ISO/DIS 4545-4:2015); German and English version prEN ISO 4545-4:2015
DANSK DS/EN ISO 6508-3:2015 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks
DANSK DS/EN ISO 16859-3:2015 Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks
NS-EN ISO 6508-1:2016 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016)
NS-EN ISO 6507-1:2018 Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2018)
NS-EN ISO 4545-1:2018 Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2017)
NS-EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
NS-EN ISO 6508-1:2015 Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2015)
AENOR UNE-EN ISO 6508-1:2017 Metal materials. Rockwell hardness test. Part 1: Test method. (ISO 6508-1:2016).
AENOR UNE-EN ISO 4545-1:2018 Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2017)
AENOR UNE-EN ISO 6507-1:2018 Metal materials. Vickers hardness test. Part 1: Test method. (ISO 6507-1:2018).
AENOR UNE-EN ISO 16859-1:2016 Metallic materials - Leeb hardness test - Part 1: Test method (ISO 16859-1:2015)
NS-EN ISO 16859-1:2015 Metallic materials — Leeb hardness test — Part 1: Test method (ISO 16859-1:2015)
DANSK DS/EN ISO 4545-1:2018 Metallic materials – Knoop hardness test – Part 1: Test method (ISO 4545-1:2017)
DANSK DS/EN ISO 6507-1:2018 Metallic materials – Vickers hardness test – Part 1: Test method (ISO 6507-1:2018)
NS-EN ISO 3738-1:2010
NS-EN ISO 14271:2017 Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
AENOR UNE-EN ISO 14271:2018 Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
DANSK DS/EN ISO 14271:2017 Resistance welding – Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017)
DIN EN ISO 22826 E:2020 Draft Document - Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005); German and English version prEN ISO 22826:2020
DIN 50103-3 E:2016 Draft Document - Testing of metallic materials - Rockwell hardness test - Part 3: Modified Rockwell scales Bm and Fm for thin steel sheet
DANSK DS/EN ISO 16859-2:2015 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices
AENOR UNE-EN ISO 6507-3:2018 Metal materials. Vickers hardness test. Part 3: Calibration of the gauge blocks. (ISO 6507-3:2018).
DIN EN ISO 6507-1 E:2016 Draft Document - Metallic materials - Vickers hardness test - Part 1: Test method (ISO/DIS 6507-1:2016); German and English version prEN ISO 6507-1:2016
DIN EN ISO 6508-1 E:2016 Draft Document - Metallic materials - Rockwell hardness test - Part 1: Test method (ISO/FDIS 6508-1:2016); German and English version FprEN ISO 6508-1:2016
DIN 50159-1 E:2013 Draft Document - Metallic materials - Hardness testing with the UCI method - Part 1: Test method
DIN EN ISO 16859-1 E:2013 Draft Document - Metallic materials - Leeb hardness test - Part 1: Test method (ISO/DIS 16859-1:2013); German version prEN ISO 16859-1:2013
DIN EN ISO 6506-1 E:2013 Draft Document - Metallic materials - Brinell hardness test - Part 1: Test method (ISO/DIS 6506-1:2013); German version prEN ISO 6506-1:2013
NS-EN ISO 6507-3:2018 Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks (ISO 6507-3:2018)
NS-EN ISO 4545-3:2018 Metallic materials — Knoop hardness test — Part 3: Calibration of reference blocks (ISO 4545-3:2017)
NS-EN ISO 6506-3:2014 Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks (ISO 6506-3:2014)
NS-EN ISO 6508-3:2015 Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015)
AENOR UNE-EN ISO 4545-3:2018 Metallic materials - Knoop hardness test - Part 3: Calibration of reference blocks (ISO 4545-3:2017)
DANSK DS/EN ISO 4545-3:2018 Metallic materials – Knoop hardness test – Part 3: Calibration of reference blocks (ISO 4545-3:2017)
DANSK DS/EN ISO 6507-3:2018 Metallic materials – Vickers hardness test – Part 3: Calibration of reference blocks (ISO 6507-3:2018)
AENOR UNE-EN ISO 16859-3:2016 Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks (ISO 16859-3:2015)
NS-EN ISO 16859-3:2015 Metallic materials — Leeb hardness test — Part 3: Calibration of reference test blocks (ISO 16859-3:2015)
DIN EN ISO 4545-1 E:2015 Draft Document - Metallic materials - Knoop hardness test - Part 1: Test method (ISO/DIS 4545-1:2015); German and English version prEN ISO 4545-1:2015
DIN ISO 4384-2 E:2013 Draft Document - Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials (ISO 4384-2:2011)
NS-EN ISO 4545-2:2018 Metallic materials — Knoop hardness test — Part 2: Verification and calibration of testing machines (ISO 4545-2:2017)
NS-EN ISO 6507-2:2018 Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018)
NS-EN ISO 6506-2:2014 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014)
NS-EN ISO 6506-2:2018 Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2017)
AENOR UNE-EN ISO 4545-2:2018 Metal materials. Knoop hardness test. Part 2: Verification and calibration of testing machines. (ISO 4545-2:2017).
AENOR UNE-EN ISO 6507-2:2018 Metal materials. Vickers hardness test. Part 2: Verification and calibration of testing machines. (ISO 6507-2:2018).
DANSK DS/EN ISO 6506-2:2019 Metallic materials – Brinell hardness test – Part 2: Verification and calibration of testing machines (ISO 6506-2:2017)
DANSK DS/EN ISO 4545-2:2018 Metallic materials – Knoop hardness test – Part 2: Verification and calibration of testing machines (ISO 4545-2:2017)
DANSK DS/EN ISO 6507-2:2018 Metallic materials – Vickers hardness test – Part 2: Verification and calibration of testing machines (ISO 6507-2:2018)
AENOR UNE-EN ISO 16859-2:2016 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015)
NS-EN ISO 16859-2:2015 Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015)
DIN EN ISO 16859-3 E:2013 Draft Document - Metallic materials - Leeb hardness test - Part 3: Calibration of reference test blocks (ISO/DIS 16859-3:2013); German version prEN ISO 16859-3:2013
DIN EN ISO 6507-3 E:2016 Draft Document - Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO/DIS 6507-3:2016); German and English version prEN ISO 6507-3:2016
DIN EN ISO 6506-3 E:2013 Draft Document - Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO/DIS 6506-3:2013); German version prEN ISO 6506-3:2013
DIN EN ISO 6508-3 E:2013 Draft Document - Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO/DIS 6508-3:2013); German version prEN ISO 6508-3:2013

Professional Standard - Machinery, Hardness Testing

JB/T 6050-2006 Generalization of hardness test for heat treated iron and steel parts
JB/T 7758.6-2008 Test method for shore handness of flexible graphite sheets
JB/T 6624-1993 Test Method for Shore Hardness of Flexible Graphite Sheet

Professional Standard - Aerospace, Hardness Testing

QJ 482-1990 Test method for microhardness of metal coatings

American Society for Testing and Materials (ASTM), Hardness Testing

ASTM B294-17 Standard Test Method for Hardness Testing of Cemented Carbides
ASTM C886-98(2015) Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
ASTM A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM E448-82(2008) Standard Practice for Scleroscope Hardness Testing of Metallic Materials
ASTM E103-84(1996) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
ASTM E103-84(2002) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials
ASTM A833-08a(2014) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM B294-92(1997) Standard Test Method for Hardness Testing of Cemented Carbides
ASTM B294-92(2001) Standard Test Method for Hardness Testing of Cemented Carbides
ASTM B294-92(2006) Standard Test Method for Hardness Testing of Cemented Carbides
ASTM B294-92(2006)e1 Standard Test Method for Hardness Testing of Cemented Carbides
ASTM E1842-96 Standard Test Method for Macro-Rockwell Hardness Testing of Metallic Materials (Withdrawn 2002)
ASTM A833-08a Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
ASTM A1038-10a Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM A1038-13 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
ASTM B277-95(2001) Standard Test Method for Hardness of Electrical Contact Materials
ASTM B277-95 Standard Test Method for Hardness of Electrical Contact Materials
ASTM E110-14 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
ASTM E721-16 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
ASTM E92-82(2003)e2 Standard Test Method for Vickers Hardness of Metallic Materials
ASTM D7735-11 Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures

AT-ON, Hardness Testing

ONORM C 9433 Teil.2-1982 Testing of elastomers; determination of ball indentation hardness (IRHD) of soft rubber; nricro hardness fest
OENORM EN ISO 22826:2021 Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005)

GOSTR, Hardness Testing

GOST ISO 22826-2017 Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
GOST R 8.969-2019 State system for ensuring the uniformity of measurements. Metals and alloys. Leeb hardness test. Part 1: Test method

Professional Standard - Light Industry, Hardness Testing

QB/T 3822-1999 Hardness testing method of the metal deposits for the light industrial products.Microscopic hardness tester method

PL-PKN, Hardness Testing

PN M59117-1986 Bonded abrasive tools Press in of bali method of hardness tes
PN C04554 ArkusZ01-1971 Water and waste water Study of hardness Introduction and rang? of standard

工业和信息化部, Hardness Testing

YS/T 1368-2020 Testing method for interface hardness of titanium-steel explosive composite plates

BE-NBN, Hardness Testing

NBN 829-01-1970 Brinell hardness test of gray or ductile iron

KR-KS, Hardness Testing

KS M ISO 18517-2017 Rubber, vulcanized or thermoplastic — Hardness testing — Introduction and guide
KS B ISO 9015-2-2017 Destructive tests on welds in metallic materials－Hardness testing－Part 2：Microhardness testing of welded joints

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Hardness Testing

GB/T 23651-2009 Rubber,vulcanized or thermoplastic.Hardness testing.Introduction and guide

United States Navy, Hardness Testing

NAVY MIL-E-24617 A-1995 EDTA HARDNESS TESTING REAGENTS, BOILER FEEDWATER, SHIPBOARD USE

GM Europe, Hardness Testing

GME 60256-2009 Determination of Ball Pressure Hardness of Elastomers International Rubber Hardness Scale (IRHD) Microhardness Test (English/German)

国家能源局, Hardness Testing

SY/T 4113.6-2019 Test methods for performance of pipeline anti-corrosion coatings Part 6: Indentation hardness test

International Organization for Standardization (ISO), Hardness Testing

ISO 4384-2:2011 Plain bearings - Hardness testing of bearing metals - Part 2: Solid materials

VE-FONDONORMA, Hardness Testing

NORVEN 55-43-1962 Test method for basic dye hardness
COVENIN 646-1975 Rockwell hardness test in Venezuela Ferrous Materials Standard (Scale A, B and C)
COVENIN 911-1975 Inspection equipment for surface chromium hardness testing in Venezuelan ferrous material standards

Professional Standard - Ferrous Metallurgy, Hardness Testing

YB/T 4285-2012 Standard test method for indentation hardness of metallic materials by portable hardness testers