ZH
RU
ES

3. Experimental equipment and materials

3. Experimental equipment and materials, Total:344 items.

In the international standard classification, 3. Experimental equipment and materials involves: Electrical and electronic testing, Analytical chemistry, Road engineering, Nuclear energy engineering, Insulating materials, Biology. Botany. Zoology, Materials for aerospace construction, Construction materials, Fluid storage devices, Sterilization and disinfection, Protection against fire, Plastics, Buildings, Components for electrical equipment, Wastes, Measurement of force, weight and pressure, Testing of metals, Construction equipment, Paints and varnishes, Lamps and related equipment, Electromechanical components for electronic and telecommunications equipment, Non-ferrous metals, Floor treatment appliances, Ceramics, Quality, Inorganic chemicals, Products of the chemical industry, Electricity. Magnetism. Electrical and magnetic measurements, Freight distribution of goods, Medical equipment, Structures of buildings, Electrical engineering in general, Rubber, Microbiology, Printed circuits and boards, Protective equipment, Shipbuilding and marine structures in general, Test conditions and procedures in general, On-board equipment and instruments, Fertilizers, Laboratory medicine, Gas and steam turbines. Steam engines, Burners. Boilers, Equipment for the chemical industry, Pipeline components and pipelines, Electrical wires and cables, Components and accessories for telecommunications equipment, Electrical accessories, Water quality, Materials and articles in contact with foodstuffs, Surface treatment and coating, Power transmission and distribution networks, Aircraft and space vehicles in general, Packaging materials and accessories, Laundry appliances, Road vehicle systems.

Underwriters Laboratories (UL), 3. Experimental equipment and materials

UL 61010-2-010-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (Third Edition)
UL 61010A-2-010 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for the Heating of Materials
UL 61010A-2-010-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for the Heating of Materials (First Edition)
UL 61010-2-010-2019 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use – Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (Fourth Edition)
UL 61010A-2-041-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Autoclaves Using Steam for the Treatment of Medical Materials and for Laboratory Processes First Edition
UL 94-1996 Test for flammability of plastic materials for parts in devices and appliances
UL 94-2009 Test for flammability of plastic materials for parts in devices and appliances
UL 61010A-2-010 (ND)-2002 National Differences For UL 61010A-2-010 Standard for Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Laboratory Equipment for the Heating of Materials (First Edition)
UL 61010-2-051-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring (Third Edition)
UL 94-2013 Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
UL 1067-1997 UL Standard for Safety Electrically Conductive Equipment and Materials for Use in Flammable Anesthetizing Locations (Third Edition)
UL 61010A-2-042-2002 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Autoclaves and Sterilizers Using Toxic Gas for the Treatment of Medical Materials and for Laboratory Processes First Edition
UL 61010A-2-041 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Autoclaves Using Steam for the Treatment of Medical Materials and for Laboratory Processes
UL 61010-2-010 BULLETIN-2014 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use – Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (COMMENTS DUE: DECEMBER 22@ 2014)
UL 61010-2-010 BULLETIN-2019 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use – Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (COMMENTS DUE: MAY 13@ 2019)
UL 61010A-2-042 BULLETIN-2005 UL Standard for Safety Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Autoclaves and Sterilizers Using Toxic Gas for the Treatment of Medical Materials and for Laboratory Processes
UL 61010A-2-041 (ND)-2002 National Differences For UL 61010A-2-041 Standard for Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Autoclaves Using Steam for the Treatment of Medical Materials and for Laboratory Processes (First Edition)
UL 61010A-2-042 (ND)-2002 National Differences For UL 61010A-2-042 Standard for Electrical Equipment for Laboratory Use; Part 2: Particular Requirements for Autoclaves and Sterilizers Using Toxic Gas for the Treatment of Medical Materials@ and for Laboratory Processes (First Editi
UL 61010-2-061-2015 UL Standard for Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use – Part 2-061: Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization (Third Edition)
UL 61010-2-040-2016 UL Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-040: Particular Requirements for Sterilizers and Washer-Disinfectors Used To Treat Medical Materials (Second Edition)

HU-MSZT, 3. Experimental equipment and materials

British Standards Institution (BSI), 3. Experimental equipment and materials

BS EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for laboratory equipment for the heating of Materials
BS EN 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of material
BS EN IEC 61010-2-010:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of materials
BS EN 61010-2-010:1993 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for laboratory equipment for the heating of materials
BS EN 764-5:2002 Pressure equipment - Compliance and inspection documentation of materials
BS 8895-1:2013 Designing for material efficiency in building projects. Code of practice for Strategic Definition and Preparation and Brief
BS IEC 61010-3-010:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Conformity verification report for IEC 61010-2-010, particular requirements for laboratory equipment for the heating of materials
BS PD IEC/TS 62885-1:2016 Surface cleaning appliances. General requirements on test material and test equipment
PD IEC TS 62885-1:2020 Surface cleaning appliances. General requirements on test material and test equipment
BS EN 764-5:2014 Tracked Changes. Pressure equipment. Inspection documentation of metallic materials and compliance with the material specification
BS ISO 14427:2004 Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of unbaked test specimens and determination of apparent density after compaction
PD IEC TR 61010-3-041:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-041:1995. Particular requirements for autoclaves using steam for the treatment of medical materials, and for laborato
PD IEC TR 61010-3-042:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-042:1997, particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materia
BS EN 868-4:1999 Packaging materials and systems for medical devices which are to be sterilized - Paper bags - Requirements and test methods
BS EN 868-2:1999 Packaging materials and systems for medical devices which are to be sterilized - Sterilization wrap - Requirements and test methods
BS EN 868-5:1999 Packaging materials and systems for medical devices which are to be sterilized - Heat and self-sealable pouches and reels of paper and plastic film construction - Requirements and test methods
BS EN 868-5:2018 Packaging materials and systems for medical devices which are to be sterilized - Heat and self-sealable pouches and reels of paper and plastic film construction - Requirements and test methods
BS EN 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
BS EN 61010-2-040:2006 Safety requirements for electrical equipment for measurement, control and laboratory use. Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
BS 4N 100-2:1999 Aircraft oxygen systems and equipment - Tests for the compatibility of materials in the presence of oxygen
BS EN 13040:2007 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
BS EN 13040:2008 Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
BS PAS 60-3:2004 Equipment used in the controlled removal of asbestos-containing materials - Operation, cleaning and maintenance of class H vacuum cleaners - Code of practice
BS 8520-3:2009 Equipment used in the controlled removal of asbestos-containing materials. Operation, cleaning and maintenance of class H vacuum cleaners. Code of practice
BS EN 60811-402:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Water absorption tests
PD IEC TR 61010-3-043:2002 Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-2-043:1997. Particular requirements for dry heat sterilizers using either hot air or hot inert gas for treatment of med
BS EN 12952-6:2011 Water-tube boilers and auxiliary installations. Inspection during construction; documentation and marking of pressure parts of the boiler
BS EN 61010-2-040:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
PAS 60-3-2004 Equipment used in the controlled removal of asbestos-containing materials--Part 3:Operation,cleaning and maintenance of class H vacuum cleaners-Code of practice
BS EN 15664-1:2008 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Design and operation
BS 7933-2:2008 Electric cables. Accessories. Material characterisation. Fingerprinting and type tests for heat shrinkable components for low voltage applications
BS 7933-2:2007 Electric cables — Accessories — Material characterisation — Part 2: Fingerprinting and type tests for heat shrinkable components for low voltage applications
BS EN 13286-50:2005 Unbound and hydraulically bound mixtures - Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
BS EN 13286-50:2004 Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
19/30396957 DC BS EN IEC 61010-2-040. Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-040. Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
21/30445372 DC BS EN ISO 12736-1. Petroleum and natural gas industries. Wet thermal insulation systems for pipelines and subsea equipment - Part 1. Validation of materials and insulation systems
BS EN ISO 12736-1:2023 Oil and gas industries including lower carbon energy. Wet thermal insulation systems for pipelines and subsea equipment. Validation of materials and insulation systems
BS EN ISO 17511:2021 Tracked Changes. In vitro diagnostic medical devices. Requirements for establishing metrological traceability of values assigned to calibrators, trueness control materials and human samples
19/30378309 DC BS EN ISO 17511. In vitro diagnostic medical devices. Requirements for establishing metrological traceability of values assigned to calibrators, trueness control materials and human samples
BS EN 868-8:1999 Packaging materials and systems for medical devices which are to be sterilized - Re-usable sterilization containers for steam sterilizers conforming to EN 285: Requirements and test methods

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, 3. Experimental equipment and materials

GB 4793.6-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for laboratory equipment for the heating of materials
GB 4793.6-2008 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 6: Particular requirements for laboratory material heating equipment
GB/T 28876.1-2012 Flammability of materials in space experimental facilities.Part 1:Requirements
GB/T 28876.2-2014 Flammability of materials in space experimental facilities.Part 2:Test methods
GB/T 11189.2-1989 Operating light-exposure apparatus(carbon-arc type) with and without water and testing method for exposure of nonmetallic materials
GB/T 11189.1-1989 Operating light-exposure apparatus(xenon-arc type) with and without water and testing method for exposure of nonmetallic materials
GB 4793.4-2001 Safety requirements for electrical equipment for measurement,control and laboratory use Particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory process
GB/T 32234.7-2015 Personal flotation devices—Part 7: Materials and components—Safety requirements and test methods

Association Francaise de Normalisation, 3. Experimental equipment and materials

NF P98-744-5:2009 Road construction and maintenance equipment - On-site calibration and verification of the settings of continuous dosing apparatus of material production plants - Part 5 : dry bulk weighing dosing machine - Substance weighing test.
NF C42-020-2-010*NF EN IEC 61010-2-010:2020 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of materials
NF C42-720:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of material.
NF C42-020-2-010*NF EN 61010-2-010:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010 : particular requirements for laboratory equipment for the heating of materials
NF EN IEC 61010-2-010:2020 Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-010 : exigences particulières pour appareils de laboratoire utilisés pour l'échauffement des matières
NF C63-101:1985 Low-voltage switchgear and controlgear for industrial use - Tests of contact materials for low-voltage controlgear
NF P98-744-4:2009 Road construction and maintenance equipment - On-site calibration and verification of the settings of continuous dosing apparatus of material production plants - Part 4 : dry bulk weighing dosing machine - Belt sampling test
NF P98-760:1991 Road construction and maintenance equipment. Pneumatic. Tired. Compactors. Evaluation of the contact pressure on soil.
NF E01-201-5:2003 Pressure equipment - Part 5 : compliance and inspection documentation of materials.
NF E01-201-5*NF EN 764-5:2015 Pressure equipment - Part 5 : inspection documentation of metallic materials and compliance with the material specification
NF P98-744-2:2009 Road construction and maintenance equipment - On-site calibration and verification of the settings of continuous dosing apparatus of material production plants - Part 2 : aggregate weighing dosing machine.
NF P98-744-3:2009 Road construction and maintenance equipment - On-site calibration and verification of the settings of continuous dosing apparatus of material production plants - Part 3 : aggregate volumetrique dosing machine.
NF EN ISO 4787:2021 Verrerie et matériel en plastique de laboratoire - Instruments volumétriques - Méthodes d'essai de la capacité et d'utilisation
NF C93-736*NF EN 61189-6:2008 Test methods for electrical materials, interconnection structures and assemblies - Part 6 : test methods for materials used in manufacturing electronic assemblies
NF T70-201:2009 Energetic materials for defence - Speed determination with immaterial barrier and doppler equipment - Generalities
NF S71-611-7:2007 Personal flotation devices - Part 7 : materials and components - Safety requirements and test methods.
NF P98-744-1:2009 Road construction and maintenance equipment - On-site calibration and verification of the settings of continuous dosing apparatus of material production plants - Part 1 : belt flow meter for belt conveyor.
NF C42-720:1994 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-010 : particular requirements for laboratory equipment for the heating of materials.
NF P98-728-2:2004 Road construction and maintenance equipment - Hot-setting hydrocarbon materials production plants - Definition of the components, of the levels and verification of the initial settings - Part 2 : discontinuous (batch) bituminous mixing plants.
NF P98-728-1:2004 Road construction and maintenance equipment - Hot-setting hydrocarbon materials production plants - Definition of the components, of the levels and verification of the initial settings - Part 1 : continuous bituminous mixing plants.
NF EN ISO 13079:2011 Matériels de laboratoire en verre et en plastique - Tubes pour le mesurage de la vitesse de sédimentation des érythrocytes par la méthode Westergren
NF U44-306*NF EN 13040:2007 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density.
NF X41-515:1962 Protection of plastics. Part 3. Testing method for resistance of equipment and apparatus to microorganisms.
NF X46-100:2019 Repérage amiante - Repérage des matériaux et produits contenant de l'amiante dans les installations, structures ou équipements concourant à la réalisation ou à la mise en oeuvre d'une activité - Mission et méthodologie
NF S71-611-7/A1:2011 Personal flotation devices - Part 7 : materials and components - Safety requirements and test methods - Amendment 1.
NF C42-727:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040 : particular requirements for sterilizers and washer-disinfectors used to treat medical materials.
NF C42-020-2-040*NF EN 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040 : particular requirements for sterilizers and washer-disinfectors used to treat medical materials
NF C42-020-2-040*NF EN IEC 61010-2-040:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 : particular requirements for sterilizers and washer disinfectors used to treat medical materials
NF C93-521:1972 Electronic components. Low frequency equipment wires and cables with solid or stranded conductors,PVC insulation and sheath. General requirements.
NF EN IEC 61326-2-1:2021 Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM Partie 2-1 : exigences particulières - Configurations d'essai, conditions fonctionnelles et critères de performance pour essai de sensibilité et matérie...
NF P93-522:2002 Building site equipment - Building site stairways intended for access and evacuation of personel - Materials - Dimensions - Calculation loads - Resistance and safety requirement - Tests
NF D21-803*NF EN 12571:1999 Materials and articles in contact with foodstuffs. Transport units for catering containers containing prepared foodstuffs. Thermal and hygienic requirements and testing.
NF C33-009-2:2008 Electric cables - Accessories - Material characterization - Part 2 : fingerprinting and type tests for heat shrinkable components for low voltage applications.
NF P41-033-1/IN1*NF EN 15664-1/IN1:2013 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1 : design and operation
NF L17-110*NF EN 2824:2012 Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media
NF P41-033-1:2008 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1 : design and operation.

American Society for Testing and Materials (ASTM), 3. Experimental equipment and materials

ASTM E531-13 Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials
ASTM D2865M-06 Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ASTM F748-16 Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
ASTM D1185-98a(2003) Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
ASTM D1185-98a Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
ASTM D2865-95 Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ASTM D2865-01 Standard Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ASTM F1027-86(2012) Standard Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices
ASTM D3182-21a Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM D5245-92(2005) Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
ASTM D5245-19 Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
ASTM D1185-98a(2009) Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
ASTM C670-15 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM D5245-92(1998) Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
ASTM D5245-92(2012) Standard Practice for Cleaning Laboratory Glassware, Plasticware, and Equipment Used in Microbiological Analyses
ASTM D3182-15a Standard Practice for Rubber&x2014;Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
ASTM C670-96 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM G93-03e1 Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
ASTM E2437-05 Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials
ASTM G26-96 Practice for Operating Light-Exposure Apparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials (Withdrawn 2000)
ASTM F2894-11 Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven
ASTM F2894-19 Standard Test Method for Evaluation of Materials, Protective Clothing, and Equipment for Heat Resistance Using a Hot Air Circulating Oven
ASTM E2410-04 Standard Practice for Designing and Validating Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials (Withdrawn 2006)
ASTM F2894-12a Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven
ASTM F2894-12b Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven
ASTM F2894-14 Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven
ASTM F2894-21 Standard Test Method for Evaluation of Materials, Protective Clothing, and Equipment for Heat Resistance Using a Hot Air Circulating Oven

Danish Standards Foundation, 3. Experimental equipment and materials

DS/EN 61010-2-010:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
DS/IEC/TR 61010-3-010:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, Particular requirements for laboratory equipment for the heating of materials
DS/EN 764-5:2003 Pressure Equipment - Part 5: Compliance and Inspection Documentation of Materials
DS/IEC TS 62885-1:2020 Surface cleaning appliances – Part 1: General requirements on test material and test equipment
DS/EN 61010-2-040:2006 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
DS/EN 2824:2011 Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media

European Committee for Electrotechnical Standardization（CENELEC）, 3. Experimental equipment and materials

EN 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials
EN 61010-2-040:2015 Safety requirements for electrical equipment for measurement@ control@ and laboratory use - Part 2-040 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
EN IEC 61010-2-040:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
EN 62011-2:2004 Insulating materials Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes Part 2: Methods of test
EN 61010-2-040:2005 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials

CENELEC - European Committee for Electrotechnical Standardization, 3. Experimental equipment and materials

EN 61010-2-010:2003 Safety requirements for electrical equipment for measurement@ control@ and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of material
EN 61010-2-010:1994 Safety Requirements for Electrical Equipment for Measurement@ Control and Laboratory Use Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials (Incorporates Amendment A1: 1996)
EN 61010-2-041:1996 Safety Requirements for Electrical Equipment for Measurment@ Control@ and Laboratory Use - Part 2-041: Particular Requirements for Autoclaves Using Steam for the Treatment of Medical Materials@ and for Laboratory Processes
EN 61010-2-042:1997 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use Part 2-042: Particular Requirements for Autoclaves and Sterilizers Using Toxic Gas for the Treatment of Medical Materials@ and for Laboratory Processes
EN 61010-2-043:1997 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use Part 2-043: Particular Requirements for Dry Heat Sterilizers Using Either Hot Air or Hot Inert Gas for the Treatment of Medical Materials@ and for Laboratory Process

AENOR, 3. Experimental equipment and materials

UNE-EN 61010-2-010:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials
UNE-EN 764-5:2015 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
UNE 135203-2:2010 Road signalisation equipment. Horizontal signalisation. Materials. Laboratory abrasion tests. Part 2: Determination of the abrasion resistance by falling abrasive method.
UNE 135203-1:2010 Road signalisation equipment. Horizontal signalisation. Materials. Laboratory abrasion tests. Part 1: Determination of the abrasion resistance by Taber method.
UNE-EN 61010-2-040:2006 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials (IEC 61010-2-040:2005)

Korean Agency for Technology and Standards (KATS), 3. Experimental equipment and materials

KS C IEC 61010-2-10:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use-Part 2-10:Particular requirements for laboratory equipment for the heating of materials
KS C IEC 61010-2-10:2014 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-10: Particular requirements for laboratory equipment for the heating of materials
KS C IEC 61010-2-010:2018 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials
KS C 6025-1987 General rules for test of tungsten and molybdenum material s for lighting and electronic equipments
KS C IEC 61189-6:2009 Test methods for electrical materials, interconnection structures and assemblies-Part 6:Test methods for materials used in manufacturing electronic assemblies
KS V ISO 12402-7:2012 Personal flotation devices－Part 7：Materials and components－Safety requirements and test methods
KS C IEC 61010-2-42:2002 Safety requipements for electrical equipment for measurement, control, and laboratory use-Part 2-42:Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials and for laboratory processes
KS C IEC 61010-2-42:2015 Safety requipements for electrical equipment for measurement, control, and laboratory use－Part 2－42：Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials and for laboratory processes
KS M ISO 14427:2010 Carbonaceous materials used in the production of aluminium－Cold and tepid ramming pastes－Preparation of unbaked test specimens and determination of apparent density after compaction
KS C IEC 61010-2-42-2002(2013) Safety requipements for electrical equipment for measurement, control, and laboratory use－Part 2－42：Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical
KS C IEC 61010-2-43-2002(2013) Safety requipements for electrical equipment for measurement, control, and laboratory use－Part 2－43：Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treat
KS C IEC 61010-2-41:2002 Safety requipements for electrical equipment for measurement, control, and laboratory use－Part 2－41：Particular requirements for autoclaves using steam for the treatment of medicals, and for laboratory processes
KS C IEC 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
KS C IEC 61010-2-43:2002 Safety requipements for electrical equipment for measurement, control, and laboratory use-Part 2-43:Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medicals materials, and for laboratory processe
KS C IEC 61010-2-43:2015 Safety requipements for electrical equipment for measurement, control, and laboratory use-Part 2-43:Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medicals materials, and for laboratory processe
KS C IEC 60189-3:2014 Low-frequency cables and wires with PVC insulation and PVC sheath — Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples
KS C IEC 60512-12-4:2009 Connectors for electronic equipment-Tests and measurements-Part 12-4:Soldering tests-Test 12d:Resistance to soldering heat, solder bath method
KS C IEC 60512-12-1:2009 Connectors for electronic equipment-Tests and measurements-Part 12-1:Soldering tests-Test 12a:Solderability, wetting,solder bath method
KS C IEC 60512-12-1:2014 Connectors for electronic equipment－Tests and measurements－Part 12-1：Soldering tests－Test 12a：Solderability, wetting,solder bath method
KS C IEC 60512-12-4:2014 Connectors for electronic equipment－Tests and measurements－Part 12-4：Soldering tests－Test 12d：Resistance to soldering heat, solder bath method
KS C IEC 61010-2-040:2018 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials

International Electrotechnical Commission (IEC), 3. Experimental equipment and materials

IEC 61010-2-010:2014 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-010:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-010:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-010:2019 RLV Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-010:2019 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-010:1992 Safety requirements for electrical equipment for measurement, control, and laboratory use; part 2-010: particular requirements for laboratory equipment for the heating of materials
IEC TR3 61010-3-010:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-010: Conformity verification report for IEC 61010-2-010, particular requirements for laboratory equipment for the heating of materials
IEC 61010-2-041:1995 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes
IEC TS 62885-1:2018 Surface cleaning appliances - Part 1: General requirements on test material and test equipment
IEC TS 62885-1:2016 Surface cleaning appliances - Part 1: General requirements on test material and test equipment
IEC TS 62885-1:2020 RLV Surface cleaning appliances - Part 1: General requirements on test material and test equipment
IEC TS 62885-1:2020 Surface cleaning appliances - Part 1: General requirements on test material and test equipment
IEC 61189-6:2006 Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in electronic assemblies
IEC TR 61010-3-041:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-041: Conformity verification report for IEC 61010-2-041:1995 - Particular requirements for autoclaves using steam for the treatment of medical materials, an
IEC 1010-2-041:1995 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-041: Particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes / Note: Applies in conjunction
IEC 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
IEC 61010-2-040:2005 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
IEC 61010-2-040:2020 RLV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
IEC 60189-3:2007 Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples
IEC TR 61010-3-042:1999 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-042: Conformity verification report for IEC 61010-2-042:1997 - Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of m
IEC TR 61010-3-043:2001 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3-043: Conformity verification report for IEC 61010-2-043:1997; Particular requirements for dry heat sterilizers using either hot air or hot inert gas for the
IEC 61010-2-040:2020 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
IEC 62011-2:2004 Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test

TH-TISI, 3. Experimental equipment and materials

TIS 2002-2000 Safety requirements for electrical equipment for measurement, control and laboratory use.part 2-010: particular requirements for laboratory equipment for the heating of materials
TIS 2006-2000 Safety requirements for electrical equipment for measurement, control and laboratory use.part 2-041: particular requirements for autoclaves using steam for the treatment of medical materials, and for laboratory processes
TIS 2007-2000 Sapety requirements for electrical equipment for measurement, control and laboratory use.part 2-042: particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes
TIS 2008-2000 Safety requirement for electrical equipment for measurement, control and laboratory use.part 2-043: particular requirements for dry heat sterilizers using either hot air or hot inert gas for the treatment of medical materials, and for laboratory processes

ZA-SANS, 3. Experimental equipment and materials

SANS 61010-2-010:2007 Safety requirements for electrical equipment for measurement, control and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of materials

RU-GOST R, 3. Experimental equipment and materials

GOST IEC 61010-2-010-2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
GOST IEC 61010-2-010-2011 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
GOST R IEC 61010-2-010-1999 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010. Particular requirements for laboratory equipment for the heating of materials
GOST R ISO 14427-2016 Carbonaceous materials for the production of aluminium. Cold and tepid ramming pastes. Preparation of unbaked test pieces and determination of apparent density after compaction
GOST R 59652-2021 Petroleum and natural gas industry. Thermal equipment lining. Main requirements to materials, design, application and acceptance
GOST 31604-2012 Connecting devices. Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units. General requirements and methods of tests
GOST R IEC 61010-2-041-1999 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-041. Particular requirements for autoclaves using steam for the treatment of medical materials and for laboratory processes
GOST R 55717-2013 Ultrasonics. Real-time pulse-echo scanners. Phantom with cylindrical, artificial cysts in tissue-mimicking material and method for evaluation and periodic testing of 3D-distributions of void-detectability ratio (VDR)

German Institute for Standardization, 3. Experimental equipment and materials

DIN EN 61010-2-010:2004 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of materials (IEC 61010-2-010:2003); German version EN 61010-2-010:2003
DIN EN 764-5:2015 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
DIN EN 61010-2-010:2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials (IEC 61010-2-010:2014); German version EN 61010-2-010:2014
DIN 51925:1996 Testing of carbon materials - Preparation of samples of carbonaceous tamping materials and determination of their bulk density - Solid binders and impregnants
DIN EN 61189-6:2007 Test methods for electrical materials, interconnection structures and assemblies - Part 6: Test methods for materials used in manufacturing electronic assemblies (IEC 61189-6:2006); German version EN 61189-6:2006
DIN 50011-2:1960 Testing of Materials, Structural Components and Equipment; Hot Cabinets; Directions for the Storage of Specimens
DIN EN 61189-3:2008 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) (IEC 61189-3:2007); German version EN 61189-3:2008
DIN 50159-2:2022-06 Metallic materials - Hardness testing with the UCI method - Part 2: Verification and calibration of the testing devices
DIN 28055-2:2002 Chemical apparatus - Surface protection with organic linings for application to metallic components - Part 2: Proof of suitability and testing
DIN 3535-1:1991 Sealants for gas supplies; elastomeric gasket materials for gas valves in domestic installations; requirements and tests
DIN 50159-2:2022 Metallic materials - Hardness testing with the UCI method - Part 2: Verification and calibration of the testing devices
DIN EN ISO 16859-2:2016 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015); German version EN ISO 16859-2:2015
DIN EN 2824:2012-01 Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media; German and English versi...
DIN 50157-2:2020 Metallic materials - Hardness testing with portable measuring devices operating with mechanical penetration depth - Part 2: Verification and calibration of the testing devices
DIN EN 15664-1:2008 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation; German version EN 15664-1:2008
DIN EN 13286-50:2005 Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction; German version EN 13286-50:2004
DIN 3535-5:1993 Sealants for gas supply; sealing materials of rubber, cork and synthetic fibres for gas armatures and gas appliances; safety requirements, tests
DIN EN 61010-2-040:2006 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials (IEC 61010-2-040:2005); German version EN 61010-2-040:20
DIN EN 61010-2-040:2016 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials (IEC 61010-2-040:2015); German version EN 61010-2-040:2
DIN EN 15001-1:2011 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, mater

KR-KS, 3. Experimental equipment and materials

KS C IEC 61010-2-010-2018(2023) Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials
KS C IEC 61010-2-010-2018 Safety requirements for electrical equipment for measurement, control and laboratory use — Part 2-010: Particular requirements for laboratory equipment for the heating of materials
KS C IEC 61010-2-040-2018(2023) Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
KS C IEC 61010-2-040-2018 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials

Standard Association of Australia （SAA）, 3. Experimental equipment and materials

AS 5101.4:2008 Methods for preparation and testing of stabilized materials - Unconfined compressive strength of compacted materials
AS 5101.5:2008 Methods for preparation and testing of stabilized materials - Absorption, swell and capillary rise of compacted materials
AS 3132:1991 Approval and test specification--Enclosures of insulating material for switchgear and controlgear
AS 1816.2:2007 Metallic materials - Brinell hardness test - Verification and calibration of testing machines
AS 1815.2:2007 Metallic materials - Rockwell hardness test - Verification and calibration of testing machine (scales A, B, C, D, E, F, G, H, K, N, T)
AS/NZS 2442.1/SUPP 8:2000 Performance of household electrical appliances - Rotary clothes dryers - Energy consumption and performance - Test material - Undershorts (Supplement to AS/NZS 2442.1:1996)

Lithuanian Standards Office , 3. Experimental equipment and materials

LST EN 61010-2-010-2015 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-010: Particular requirements for laboratory equipment for the heating of Materials (IEC 61010-2-010:2014)
LST EN 61010-2-010-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-010: Particular requirements for laboratory equipment for the heating of material (IEC 61010-2-010:2003)
LST EN 764-5-2003 Pressure Equipment - Part 5: Compliance and Inspection Documentation of Materials
LST EN 61010-2-042-2000 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes (IEC 61010-2-
LST EN 61010-2-043-2000 Safety requirements for electrical equipment for measurement control and laboratory use. Part 2-043: Particular requirements for autoclaves and sterilizers using either hot air or hot inert gas for the treatment of medical materials, and for laboratory pr
LST EN 61010-2-040-2005 Safety requirements for electrical equipment for measurement, control and laboratory use. Part 2-040: Particular requirements for sterilizers and washer disinfectors used to treat medical materials (IEC 61010-2-040:2005)
LST EN 2824-2012 Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media

ESD - ESD ASSOCIATION, 3. Experimental equipment and materials

TR53-01-2006 Compliance Verification of ESD Protective Equipment and Materials
TR53-01-2018 Protection of Electrostatic Discharge Susceptible Items Compliance Verification of ESD Protective Equipment and Materials
TR53-01-2015 The Protection of Electrostatic Discharge Susceptible Items Compliance Verification of ESD Protective Equipment and Materials

CZ-CSN, 3. Experimental equipment and materials

CSN 91 0912-1979 Laboratory furniture for work with radioactive materials. Common technical requirements.
CSN 91 0916-1978 Laboralory furniture forwork with radioactive materials. Shelfs and shelf stands
CSN 72 1009-1981 Preparation of final sample for chemical and physical tests of ceramic products and raw materials

ANSI - American National Standards Institute, 3. Experimental equipment and materials

Z245.1-2017 Equipment Technology and Operations for Wastes and Recyclable Materials - Mobile Wastes and Recyclable Materials Collection@ Transportation@ and Compaction Equipment - Safety Requirements (NW&RA)
Z245.1-2008 Equipment Technology and Operations for Wastes and Recyclable Materials — Mobile Wastes and Recyclable Materials Collection@ Transportation@ and Compaction Equipment — Safety Requirements (NW&RA)
Z245.1-1999 Mobile Wastes and Recyclable Materials Collection@ Transportation@ and Compaction Equipment - Safety Requirements (NW&RA)
Z245.1-2012 Equipment Technology and Operations for Wastes and Recyclable Materials - Mobile Wastes and Recyclable Materials Collection@ Transportation@ and Compaction Equipment - Safety Requirements (NW&RA; Includes Amendment: 8/2/2014)
Z245.2-1997 Equipment Technology and Operations for Wastes and Recyclable Materials - Stationary Compactors Safety Requirements (NW&RA)
Z245.2-2008 Equipment Technology and Operations for Wastes and Recyclable Materials Stationary Compactors — Safety Requirements for Installation@ Maintenance and Operation (NW&RA)
Z245.2-2004 for Equipment Technology and Operations for Wastes and Recyclable Materials --- Stationary Compactors – Safety Requirements for Installation@ Maintenance and Operation (NW&RA)

American National Standards Institute （ANSI), 3. Experimental equipment and materials

ANSI Z245.1-2008 Equipment Technology and Operations for Wastes and Recyclable Materials - Mobile Wastes and Recyclable Materials Collection, Transportation, and Compaction Equipment - Safety Requirements
ANSI Z245.1-2012 Equipment Technology and Operations for Wastes and Recyclable Materials - Mobile Wastes and Recyclable Materials Collection, Transportation, and Compaction Equipment - Saftey Requirements
ANSI/NFPA 53-2011 Recommended Practice on Materials, Equipment, and Systems Used in Oxygen-Enriched Atmospheres
ANSI Z245.21-2008 Equipment Technology and Operations for Wastes and Recyclable Materials — Stationary Compactors — Safety Requirements
ANSI/UL 94a-2013 Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances
ANSI/UL 94-2013 Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices
ANSI/ASTM F2875:2010 Guide for Laboratory Requirements Necessary to Test Commercial Cooking Appliances to ASTM Test Methods
ANSI/ASTM D6343:2010 Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications
ANSI/ASTM E2599:2011 PRACTICE FOR SPECIMEN PREPARATION AND MOUNTING OF REFLECTIVE INSULATION, RADIANT BARRIER AND VINYL STRETCH CEILING MATERIALS FOR BUILDING APPLICATIONS TO ASSESS SURFACE BURNING CHARACTERISTICS
ANSI Z245.2-2008 Equipment Technology and Operations for Wastes and Recyclable Materials Stationary Compactors — Safety Requirements for Installation, Maintenance and Operation
ANSI Z245.21-2013 Equipment Technology and Operations for Wastes and Recyclable Materials - Stationary Compactors - Safety Requirements for Installation, Maintenance and Operation
ANSI Z245.2-2013 Equipment Technology and Operations for Wastes and Recyclable Materials - Stationary Compactors - Safety Requirements for Installation, Maintenance and Operation
ANSI/SAE J2230-1993 Accelerated Exposure of Automotive Interior Trim Materials Using Outdoor Under-Glass Controlled Sun-Tracking Temperature and Humidity Apparatus

Canadian Standards Association (CSA), 3. Experimental equipment and materials

CSA C22.2 No.61010-2-010-04-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of materials Second Edition
CSA C22.2 No.1010.2.041-96-1996 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-041: Particular Requirements for Autoclaves Using Steam for the Treatment of Medical Materials, and for Laboratory Processes First Edition
CSA C22.2 No.61010-2-042-98-1998 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-042: Particular Requirements for Autoclaves and Sterilizers Using Toxic Gas for the Treatment of Medical Materials, and for Laboratory Processes First Editio
CSA C22.2 No.61010-2-043-98-1998 Regles De Securite Pour Appareils Electriques De Mesurage, De Regulation Et De Laboratoire Partie 2-043: Prescriptions Particulieres Pour Les Sterilisateurs A Chaleur Utilisant De L碅ir Chaud Ou Un Gaz Inerte Chaud Pour Le Traitement Des Materiels A Usag
CAN/CSA-C22.2 NO.1010.2.041-1996 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-041: Particular Requirements for Autoclaves Using Steam for the Treatment of Medical Materials, and for Laboratory Processes (First Edition)
CAN/CSA-C22.2 NO.61010-2-061-2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization (Third Edition)
CAN/CSA-C22.2 NO.61010-2-043-1998 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-043: Particular Requirements for Dry Heat Sterilizers Using Either Hot Air or Hot Inert Gas for the Treatment of Medical Materials, and for Laboratory Proce
CAN/CSA-C22.2 NO.61010-2-042-1998 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-042: Particular requirements for autoclaves and sterilizers using toxic gas for the treatment of medical materials, and for laboratory processes (First Edit
CAN/CSA-C22.2 NO.61010-2-040-2007 Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials (First Edition)
CSA C22.2 No.61010-2-040-07-CAN/CSA-2007 Safety requirements for electrical equipment for measurement, control and laboratory use ?Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials First Edition
CAN/CSA-C22.2 NO.61010-2-032-2014 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and handmanipulated current sensors for electrical test and measurement (Third Edition)

BE-NBN, 3. Experimental equipment and materials

NBN-EN 2374-1993 Aerospace series. Glass fibre reinforced mouldings and sandwich composites. Production of test panels

IEC - International Electrotechnical Commission, 3. Experimental equipment and materials

IEC TR 61010-3-010:1999 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 3-010: Conformity Verification Report for IEC 61010-2-010@ Particular Requirements for Laboratory Equipment for the Heating of Materials (Edition 1.0)
TS 62885-1-2016 Surface cleaning appliances – Part 1: General requirements on test material and test equipment (Edition 1.0)
TS 62885-1-2018 Surface cleaning appliances - Part 1: General requirements on test material and test equipment (Edition 2.0)

Japanese Industrial Standards Committee (JISC), 3. Experimental equipment and materials

JIS H 4460:2002 General rules for test of tungsten and molybdenum materials for lighting and electronic equipments

European Committee for Standardization (CEN), 3. Experimental equipment and materials

EN 764-5:2002 Pressure Equipment - Part 5: Compliance and Inspection Documentation of Materials
EN ISO 12402-7:2020 Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods (ISO 12402-7:2020)
EN ISO 12402-7:2006 Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods (Incorporates Amendment A1: 2011)
prEN 30993-1-1992 Biological evaluation of medical devices; part 1: guidance on selection of tests (ISO 10993-1:1992 + Technical Corrigendum 1:1992)
EN 13040:2007 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
EN 13040:1999 Soil Improvers and Growing Media - Sample Preparation for Chemical and Physical Tests, Determination of Dry Matter Content, Moisture Content and Laboratory Compacted Bulk Density
prEN 30993-7-1993 Biological testing of medical and dental materials and devices; part 7: ethylene oxide sterilization residuals (ISO/DIS 10993-7)
EN ISO 16859-2:2015 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015)
EN 868-5:1999 Packaging materials and systems for medical devices which are to be sterilized Part 5: Heat and self-sealable pouches and reels of paper and plastic film construction Requirements and test methods Incorporating corrigendum October 2001
EN 868-10:2009 Packaging for terminally sterilized medical devices - Part 10: Adhesive coated nonwoven materials of polyolefines - Requirements and test methods
EN 15664-1:2008 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation (Incorporates Amendment A1: 2013)
EN 13286-5-2003E Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
EN 13286-50:2004 Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
EN 13286-50-2004E Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction
prEN ISO 12736-1 Petroleum and natural gas industries - Wet thermal insulation systems for pipelines and subsea equipment - Part 1: Validation of materials and insulation systems (ISO/DIS 12736-1:2021)

US-CFR-file, 3. Experimental equipment and materials

CFR 46-159.005-9-2014 Shipping. Part159:Approval of equipment and materials. Section159.005–9:Approval inspections and tests.

IT-UNI, 3. Experimental equipment and materials

ANCC M.13.D.1-1973

PL-PKN, 3. Experimental equipment and materials

PN T42113-1989 Data processing cquipmcnt Saiety of computers Materials Resistancc to fire Re?uiremcnts and tests

Indonesia Standards, 3. Experimental equipment and materials

SNI 03-6804-2002 Manual for laboratory preparation of chemical-grouted soil test specimen for obtaining design strength parameter

Professional Standard - Electron, 3. Experimental equipment and materials

SJ/Z 9132-1987 Tests for flammability of plastic materials used for parts and components in electric devices and equipment

International Organization for Standardization (ISO), 3. Experimental equipment and materials

ISO 16859-2:2015 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices
ISO 12402-7:2006 Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods
ISO 14427:2004 Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of unbaked test specimens and determination of apparent density after compaction
ISO 12402-7:2006/Amd 1:2011 Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods; Amendment 1
ISO/FDIS 12736-1 Petroleum and natural gas industries — Wet thermal insulation systems for pipelines and subsea equipment — Part 1: Validation of materials and insulation systems

AT-ON, 3. Experimental equipment and materials

ONORM B 3822-1984 Behaviour of equipment materials in fire; Decoration articles; Test and requirements

未注明发布机构, 3. Experimental equipment and materials

BS 1610-1:1992(1999) Materials testing machines and force verification equipment — Part 1 : Specification for the grading of the forces applied by materials testing machines whenused inthe compression mode
BS EN 61010-2-041:1997 Safetyrequirementsfor electrical equipment for measurement, control, and laboratory use — Part 2 - 041 : Particular requirements for autoclaves using steam for the treatment ofmedical materials, and for laboratory processes
BS 1610-3:1990(1999) Materials testing machines and force verification equipment — Part 3 : Specification for the grading of the forces applied by deadweight and lever creep testing machines
BS EN 61010-2-042:1997 Safety requirements for electrical equipment for measurement, control, and laboratory use — Part 2 - 042 : Particular requirements for autoclaves and sterilizers using toxic gas for the treatment ofmedical materials, and for laboratory processes
DIN EN ISO 4787:2022 Glass and plastic laboratory equipment – Volumetric measuring devices – Test methods and application (ISO 4787:2021); German version EN ISO 4787:2021
SAE J2230-202001 Accelerated Exposure of Automotive Interior Trim Material Using outdoor Under-Glass Controlled Sun-Tracking Temperature and humidity apparatus

国家市场监督管理总局、中国国家标准化管理委员会, 3. Experimental equipment and materials

GB/T 38048.1-2020 Surface cleaning appliances—Part1: General requirements on test material and test equipment
GB 4793.4-2019 Safety requirements for electrical equipment for measurement,control and laboratory use—Part 4: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials

IN-BIS, 3. Experimental equipment and materials

IS 9022-1979

ES-UNE, 3. Experimental equipment and materials

UNE-EN ISO 16859-2:2016 Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015)
UNE-EN IEC 61010-2-040:2021 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials (Endorsed by Asociación Española de Normalización...
UNE-EN 61010-2-040:2015 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040 Particular requirements for sterilizers and washer-disinfectors used to treat medical materials (Endorsed by AENOR in November of 2015.)
UNE-EN 2824:2011 Aerospace series - Burning behaviour of non-metallic materials under the influence of radiating heat and flames - Determination of smoke density and gas components in the smoke of materials - Test equipment apparatus and media (Endorsed by AENOR in Jan...

The American Road & Transportation Builders Association, 3. Experimental equipment and materials

AASHTO TP51-1995 Standard Test Method for Testing Cathodic Protection Materials and Systems for Bridge Decks 2000 Edition

ISA - International Society of Automation, 3. Experimental equipment and materials

ISA 61010-1-2004 Safety Requirements for Electrical Equipment for Measurement Control@ and Laboratory Use – Part 1: General Requirements (82.02.01; Third Printing: 10/28/2008)

Group Standards of the People's Republic of China, 3. Experimental equipment and materials

T/WHDQHX 002-2021 Low-voltage switchgear and controlgear for intelligent assemblies Requirements for supplier review and incoming inspection of key components & materials

US-FCR, 3. Experimental equipment and materials

FCR NE-F-2-8T-1978 QUALIFICATION AND CONTROL OF ANALYTICAL CHEMISTRY LABORATORIES FOR CONTROL ROD ABSORBER MATERIAL ANALYSIS (INACTIVE FOR NEW DESIGN)

ES-AENOR, 3. Experimental equipment and materials

US-DOT, 3. Experimental equipment and materials

DOT 49 CFR PART 386-2010 RULES OF PRACTICE FOR MOTOR CARRIER, INTER-MODAL EQUIPMENT PROVIDER, BROKER, FREIGHT FORWARDER, AND HAZARDOUS MATERIALS PROCEEDINGS

GB-REG, 3. Experimental equipment and materials

REG 49 CFR PART 386-2011 RULES OF PRACTICE FOR MOTOR CARRIER, INTER-MODAL EQUIPMENT PROVIDER, BROKER, FREIGHT FORWARDER, AND HAZARDOUS MATERIALS PROCEEDINGS

GOSTR, 3. Experimental equipment and materials

GOST 31604-2020 Connecting devices. Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units. General requirements and test methods
GOST R 58402.5-2019 Automobile roads of general use. Mineral materials for preparing asphalt mixtures. Volumetric-functional design system. Method for determination of bulk density and emptiness of coarse aggregate after compaction

Aerospace, Security and Defence Industries Association of Europe (ASD), 3. Experimental equipment and materials

ASD-STAN PREN 2824-1995 Aerospace Series Burning Behaviour of Non Metallic Materials Under the Influence of Radiating Heat and Flames Determination of Smoke Density and Gas Components in the Smoke of Materials Test Equipment, Apparatus and Media (Edition P 1)

Society of Automotive Engineers (SAE), 3. Experimental equipment and materials

SAE J2230-1993 Accelerated Exposure of Automotive Interior Trim Material Using outdoor Under-Glass Controlled Sun-Tracking Temperature and humidity apparatus

SAE - SAE International, 3. Experimental equipment and materials

SAE J2230-2020 Accelerated Exposure of Automotive Interior Trim Materials Using Outdoor Under-Glass Controlled Sun-Tracking Temperature and Humidity Apparatus@ Standard;