ZH
RU
ES

Ignition point of various plastics

Ignition point of various plastics, Total:93 items.

In the international standard classification, Ignition point of various plastics involves: Electrical engineering in general, Coals, Plastics, Fuels, Protection against fire, Raw materials for rubber and plastics, Pipeline components and pipelines, Rubber and plastics products, Analytical chemistry, PETROLEUM AND RELATED TECHNOLOGIES, Insulating materials, Reinforced plastics.

Professional Standard - Electron, Ignition point of various plastics

SJ/Z 9132-1987 Tests for flammability of plastic materials used for parts and components in electric devices and equipment

RU-GOST R, Ignition point of various plastics

GOST 30404-2013 Solid mineral fuel. Determination of forms of sulfur

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Ignition point of various plastics

GB/T 9343-1988 Test method for flammability of plastics--Flash-ignition temperature and self-ignition temperature test
GB/T 4610-1984 Test for flammability of plastics--Ignition temperature test

American Society for Testing and Materials (ASTM), Ignition point of various plastics

ASTM E776-87(2004) Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
ASTM E776-87(1996) Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
ASTM E776-87(2009) Standard Test Method for Forms of Chlorine in Refuse-Derived Fuel
ASTM D1929-12 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-11 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-13 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D1929-13a Standard Test Method for Determining Ignition Temperature of Plastics
ASTM F2622-08(2013) Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM D6733-01(2006) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
ASTM D6733-01 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Meter Capillary High Resolution Gas Chromatography
ASTM F2622-08 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM F2622-20 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM F2622-08e1 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
ASTM D8076-17 Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D8076-19 Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D8076-20 Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D8076-19a Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D8076-17a Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D8076-18 Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
ASTM D7474-17 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
ASTM D7474-08 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
ASTM D7474-12 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
ASTM D6729-01 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Meter Capillary High Resolution Gas Chromatography
ASTM D6733-01(2011) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
ASTM D6729-14 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
ASTM D6729-04e1 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
ASTM D6729-20 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
ASTM D6730-01 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
ASTM D6730-01(2006)e1 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 1000150;Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
ASTM D6730-01(2011) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 1000150;Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
ASTM D6733-01(2020) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography
ASTM D6730-21 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
ASTM D6730-19 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

ES-AENOR, Ignition point of various plastics

UNE 60-714-1992 Turned outlet connectors to flexible tubes for first, second and third family gaseous fuels low pressure

Professional Standard - Chemical Industry, Ignition point of various plastics

HG/T 4670-2014 Determination of black speck and impurity in flame retardant for plastic modification

British Standards Institution (BSI), Ignition point of various plastics

BS ISO 871:2006 Plastics - Determination of ignition temperature using a hot-air furnace
BS ISO 9854-2:2023 Thermoplastics pipes for the transport of fluids. Determination of Charpy impact properties - Test conditions for pipes of various materials
22/30414914 DC BS ISO 9854-2. Thermoplastics pipes for the transport of fluids. Determination of Charpy impact properties - Part 2. Test conditions for pipes of various materials
23/30470178 DC BS ISO 9854-2.2. Thermoplastics pipes for the transport of fluids. Determination of Charpy impact properties - Part 2. Test conditions for pipes of various materials
BS EN 60674-3-8:2011 Plastic films for electrical purposes. Specifications for individual materials. Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
BS EN 60674-3-8:2011+A1:2017 Plastic films for electrical purposes - Specifications for individual materials. Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
22/30451642 DC BS EN 60674-3-3. Specification for plastic films for electrical purposes - Part 3. Specifications for individual materials. Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation
BS 2782-1 Method 140A:1992 Methods of testing plastics. Thermal properties. Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source

(U.S.) Ford Automotive Standards, Ignition point of various plastics

FORD FLTM BO 021-3-2001 METHOD FOR DETERMINING FLOW UNDER LOAD OF VARIOUS PLASTIC MATERIALS AT MODERATE TEMPERATURES

AENOR, Ignition point of various plastics

UNE 53993:2009 IN Plastics. Thermoplastic tanks above ground or pit installation for liquid fuels including biodiesel with flashpoint higher than 55 oC.
UNE-EN 60674-3-1:1999/A1:2012 Plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
UNE-EN ISO 9773:1998 PLASTICS. DETERMINATION OF BURNING BEHAVIOUR OF THIN FLEXIBLE VERTICAL SPECIMENS IN CONTACT WITH A SMALL-FLAME IGNITION SOURCE. (ISO 9773:1998).
UNE-EN ISO 9773/A1:2004 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens (ISO 9773:1998/Amd 1:2003)

Standard Association of Australia （SAA）, Ignition point of various plastics

ISO 9854-2:2023 Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 2: Test conditions for pipes of various materials
AS 2122.1:1993 Combustion characteristics of plastics - Determination of flame propagation - Surface ignition of vertically oriented specimens of cellular plastics

International Organization for Standardization (ISO), Ignition point of various plastics

ISO/DIS 9854-2.2 Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 2: Test conditions for pipes of various materials
ISO 9854-2:1994 Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charpy method - Part 2: Test conditions for pipes of various materials
ISO/CD 9773 Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source

Danish Standards Foundation, Ignition point of various plastics

DS/ISO 9854-2:1999 Thermoplastics pipes for the transport of fluids - Determination of pendulum impact strength by the Charphy method - Part 2: Test conditions for pipes of various materials
DS/EN IEC 60674-3-1:2021 Plastic films for electrical purposes – Part 3: Specifications for individual materials – Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
DS/EN 60674-3-1/A1:2012 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
DS/EN 60674-3-1:1999 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
DS/EN ISO 9773:1998 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
DS/EN ISO 9773/A1:2004 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens
DS/EN 60454-3-6:1998 Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 6: Polycarbonate film tapes with acrylic thermoplastic adhesive
DS/EN 60674-3-8:2011 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation

IX-EU/EC, Ignition point of various plastics

75/716/EEC-1975 Council Directive on the Approximation of the Laws of the Member States Relating to the Sulphur Content of Certain Liquid Fuels

ES-UNE, Ignition point of various plastics

UNE 53993:2009 IN ERRATUM:2010 Plastics. Thermoplastic tanks above ground or pit installation for liquid fuels including biodiesel with flashpoint higher than 55 ºC.

Japanese Industrial Standards Committee (JISC), Ignition point of various plastics

JIS K 7341:2006 Plastics -- Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
JIS K 7053:1999 Textile glass reinforced plastics -- Determination of void content -- Loss on ignition, mechanical disintegration and statistical counting methods

European Committee for Electrotechnical Standardization（CENELEC）, Ignition point of various plastics

EN IEC 60674-3-1:2021 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
EN 60674-3-8:2011 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 8: Balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation

Korean Agency for Technology and Standards (KATS), Ignition point of various plastics

KS M ISO 9773-2016(2021) Plastics－Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
KS C IEC 60674-3-4-2014(2019) Specification for plastic films for electrical purposes — Part 3: Specifications for individual materials — Sheets 4 to 6: Requirements for polyimide films used for electrical insulation
KS M 2409-2005(2020) Standard test method for determination of individual components in spark ignition engine fuels by 100 metre capillary (with precolumn) high-resolution gas chromatography

KR-KS, Ignition point of various plastics

KS M ISO 9773-2016 Plastics－Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source

German Institute for Standardization, Ignition point of various plastics

DIN EN 60674-3-1:2012 Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:1998 + A1:2011); German version EN 60674-3-1:1998 + A1:2011
DIN EN 60674-3-3:1999 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation (IEC 60674-3-3:1992); German version EN 60674-3-3:1998
DIN EN 60674-3-4 bis 6:1999 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheets 4 to 6: Requirements for polyimide films used for electrical insulation (IEC 60674-3-4 to 6:1993); German version EN 60674-3-4 bis 6:1995
DIN EN 60674-3-7:1999 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation (IEC 60674-3-7:1992); German version EN 60674-3-7:1998
DIN EN ISO 9773:2004-02 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998 + Amd. 1:2003); German version EN ISO 9773:1998 + A1:2003 / Note: To be replaced by DIN EN ISO 9773 (2011-04).
DIN EN 60674-3-2:1999 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials; Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation (IEC 60674-3-2:1992); Ge

International Electrotechnical Commission (IEC), Ignition point of various plastics

IEC 60674-3-4:1993 Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheets 4 to 6: Requirements for polyimide films used for electrical insulation

未注明发布机构, Ignition point of various plastics

BS EN ISO 9773:1999(2004) Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small - flame ignition source

Lithuanian Standards Office , Ignition point of various plastics

LST EN ISO 9773:2001 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998)
LST EN 60674-3-1-2001/A1-2012 Plastic films for electrical purposes -- Part 3: Specifications for individual materials -- Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors (IEC 60674-3-1:1998/A1:2011)
LST EN ISO 9773:2001/A1:2004 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens (ISO 9773:1998/Amd 1:2003)

Association Francaise de Normalisation, Ignition point of various plastics

NF EN ISO 9773:1998 Plastiques - Détermination du comportement au feu d'éprouvettes minces verticales souples au contact d'une petite flamme comme source d'allumage
NF EN 60749-32/A1:2011 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 32 : inflammabilité des dispositifs à encapsulation plastique (cas d'une cause extérieure d'inflammation)
NF EN 60749-32:2003 Dispositifs à semiconducteurs - Méthodes d'essais mécaniques et climatiques - Partie 32 : inflammabilité des dispositifs à encapsulation plastique (cas d'une cause extérieure d'inflammation)
NF C26-145-3-8/A1*NF EN 60674-3-8/A1:2017 Plastic films for electrical purposes - Part 3 : specifications for individual materials - Sheet 8 : balanced biaxially oriented polyethylene naphthalate (PEN) films used for electrical insulation
NF EN ISO 9773/A1:2004 Plastiques - Détermination du comportement au feu d'éprouvettes minces verticales souples au contact d'une petite flamme comme source d'allumage - Amendement 1 : éprouvettes

CENELEC - European Committee for Electrotechnical Standardization, Ignition point of various plastics

EN 60454-3-3:1998 Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 3: Polyester Film Tapes with Rubber Thermoplastic Adhesive

European Committee for Standardization (CEN), Ignition point of various plastics

prEN 60454-3-13-1992 Specification for pressure-sensitive adhesive tapes for electrical purposes; part 3: specifications for individual materials; sheet 13: requirements for combined cellulose-viscose woven fabric tapes, one side recovered with a thermoplastic material, the o