ZH
RU
ES

Standard Curve Detection

Standard Curve Detection, Total:500 items.

In the international standard classification, Standard Curve Detection involves: Testing of metals, Noise with respect to human beings, Machine tools, Sports equipment and facilities, Iron and steel products, Non-ferrous metals, Road engineering, Raw materials for rubber and plastics, Products of the textile industry, Protection against crime, Wood-based panels, Shafts and couplings, Earth-moving machinery, Construction industry, Vocabularies, Electricity. Magnetism. Electrical and magnetic measurements, Internal combustion engines, Electrical wires and cables, Electrical accessories, Medical equipment, Waxes, bituminous materials and other petroleum products, Construction materials, Non-destructive testing, Springs, Solar energy engineering, Measurement of volume, mass, density, viscosity, Optics and optical measurements, Standardization. General rules, Petroleum products in general, Road vehicles in general, Refractories, Farming and forestry, Plastics, Radiation measurements, Photography, Insulating materials, Company organization and management, Headgear. Clothing accessories. Fastening of clothing, Civil engineering in general, Air quality, Road vehicle systems, Materials for the reinforcement of composites, Paint coating equipment, Microbiology, Hydraulic fluids, Rubber and plastics products, Aerospace electric equipment and systems, Welding, brazing and soldering, Reinforced plastics, Metrology and measurement in general, Adhesives, Paper and board, Medical sciences and health care facilities in general, Nuclear energy engineering, Structures of buildings, Products of the chemical industry, Leather technology, Fasteners, Paper products, Magnetic materials, Quality, Ventilators. Fans. Air-conditioners, Linear and angular measurements, Sterilization and disinfection, Ceramics, General methods of tests and analysis for food products, Glass, Electromechanical components for electronic and telecommunications equipment, Electrical and electronic testing, Analytical chemistry, Fibre optic communications.

AASHTO - American Association of State Highway and Transportation Officials, Standard Curve Detection

T 272-2010 Standard Method of Test for Family of Curves—One Point Method
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method
T 272-1986 Standard Method of Test for Family of Curves - One-Point Method (HM-22; PART IIB)
TP 107-2018 Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test
PP 62-2009 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA)
R 62-2013 Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
T272-1986 Standard Method of Test for Family of Curves - One-Point Method (Nineteenth Edition; Revised Per Interim Specifications - Tests and Methods - 1999)
T 313-2009 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2004 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP 125-2016 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2003 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2008 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2006 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2005 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2012 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
PP 96-2018 Proposed Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures Using the Indirect Tension Testing Method

BR-ABNT, Standard Curve Detection

American Society for Testing and Materials (ASTM), Standard Curve Detection

ASTM E561-21 Standard Test Method for KR Curve Determination
ASTM E561-20 Standard Test Method for KR Curve Determination
ASTM E561-19 Standard Test Method for KR Curve Determination
ASTM E561-19e1 Standard Test Method for KR Curve Determination
ASTM E561-22 Standard Test Method for KR Curve Determination
ASTM E561-08e1 Standard Test Method forK-R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM E561-98 Standard Practice for R-Curve Determination
ASTM E561-15 Standard Test Method for KR Curve Determination
ASTM E561-08 Standard Test Method forK-R Curve Determination
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM E561-05e1 Standard Test Method forK-R Curve Determination
ASTM E561-15a Standard Test Method for KR Curve Determination
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM E561-10 Standard Test Method forK-R Curve Determination
ASTM D2493/D2493M-09 Standard Viscosity-Temperature Chart for Asphalts
ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM A456/A456M-99(2003) Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
ASTM D3043-00e1 Standard Test Methods for Testing Structural Panels in Flexure
ASTM D3043-00(2006) Standard Test Methods for Structural Panels in Flexure
ASTM A456/A456M-99 Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
ASTM A503/A503M-01(2001)e1 Standard Specification for Ultrasonic Examination of Forged Crankshafts
ASTM A503/A503M-99 Standard Specification for Ultrasonic Examination of Forged Crankshafts
ASTM A503/A503M-01 Standard Specification for Ultrasonic Examination of Forged Crankshafts
ASTM A503/A503M-15(2020) Standard Specification for Ultrasonic Examination of Forged Crankshafts
ASTM A503/A503M--01 Standard Specification for Ultrasonic Examination of Forged Crankshafts
ASTM A503/A503M-15 Standard Specification for Ultrasonic Examination of Forged Crankshafts
ASTM A456/A456M-08(2018) Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
ASTM A503/A503M-01(2011) Standard Specification for Ultrasonic Examination of Forged Crankshafts
ASTM E561-23 Standard Test Method for KR Curve Determination
ASTM D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM A456/A456M-08(2013) Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
ASTM A456/A456M-08 Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
ASTM D1336-07(2011) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM F3141-23 Standard Guide for Total Knee Replacement Loading Profiles
ASTM F1832-07 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D6068-96 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM A456/A456M-08(2023) Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings
ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
ASTM F1832-07(2011) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM C1656-07 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
ASTM B389-81(1998) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM B389-81(2020) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
ASTM C1656-13 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
ASTM C1699-09(2015) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D1336-07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D4695-96 Standard Guide for General Pavement Deflection Measurements
ASTM D4695-03 Standard Guide for General Pavement Deflection Measurements
ASTM C485-83(2003) Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM C485-83(1999) Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM C485-83(2003)e1 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM A986/A986M-01(2006) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
ASTM D1336-97(2003) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D1336-97 Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM E1255-96(2002) Standard Practice for Radioscopy
ASTM E1255-96 Standard Practice for Radioscopy
ASTM D4695-03(2008) Standard Guide for General Pavement Deflection Measurements
ASTM C485-16 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM D6200-01(2007) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-00 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM E1082-90(2002) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1082-90(2007) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C16-03(2008) Standard Test Method for Load Testing Refractory Shapes at High Temperatures
ASTM E1082-90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C1656-13(2018) Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
ASTM D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM D6200-01(2017) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM C1699-09(2023) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM C1699-08 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM D6200-01(2012) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis
ASTM C1656-13(2023) Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
ASTM E1647-98a Standard Practice for Determining Contrast Sensitivity in Radioscopy
ASTM D3883-04 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM E1742-08 Standard Practice for Radiographic Examination
ASTM E1742-00 Standard Practice for Radiographic Examination
ASTM E1742/E1742M-18 Standard Practice for Radiographic Examination
ASTM E746-02 Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM E746-93(1998) Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM D4882-97 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM D4882-17 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
ASTM C485-09 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM F2771-09 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM D6177-19 Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets
ASTM E1734-09 Standard Practice for Radioscopic Examination of Castings
ASTM D648-04 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-00a Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-01 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D648-07 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM F584-87(2005) Standard Practice for Visual Inspection of Semiconductor Lead-Bonding Wire
ASTM F584-87(1999) Standard Practice for Visual Inspection of Semiconductor Lead-Bonding Wire
ASTM D6957-12(2018) Standard Practice for Measuring Curl in Paint Brush Filling Material
ASTM A986/A986M-01(2011) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
ASTM E1647-09 Standard Practice for Determining Contrast Sensitivity in Radioscopy
ASTM E746-07 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM E2948-14 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire
ASTM E1202-87(2003) Standard Guide for Development of Micronucleus Assay Standards
ASTM E1202-87(1998) Standard Guide for Development of Micronucleus Assay Standards
ASTM D6549-06(2021) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D1830-17 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM E1316-11 Standard Terminology for Nondestructive Examinations
ASTM E1316-10c Standard Terminology for Nondestructive Examinations
ASTM E1316-23 Standard Terminology for Nondestructive Examinations
ASTM E1316-14 Standard Terminology for Nondestructive Examinations
ASTM E1316-23a Standard Terminology for Nondestructive Examinations
ASTM E1416-04 Standard Test Method for Radioscopic Examination of Weldments
ASTM E1416-09 Standard Test Method for Radioscopic Examination of Weldments
ASTM E1742/E1742M-12 Standard Practice for Radiographic Examination
ASTM A986/A986M-01 Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
ASTM A986/A986M-98 Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
ASTM A986/A986M-01(2021) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
ASTM A986/A986M-01(2016) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
ASTM C480/C480M-08(2015) Standard Test Method for Flexure Creep of Sandwich Constructions
ASTM E1647-03 Standard Practice for Determining Contrast Sensitivity in Radioscopy
ASTM D3883-99 Standard Test Method for Yarn Crimp or Yarn Take-up in Woven Fabrics
ASTM D3883-04(2008) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM E1541-98 Standard Practice for Specifying and Matching Color Using the Colorcurve System
ASTM D3883-04(2012) Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
ASTM D4338-97(2004) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D4338-97 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM D6549-01 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D6549-00 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM E1202-87(2008) Standard Guide for Development of Micronucleus Assay Standards
ASTM E915-10 Standard Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
ASTM E1316-21a Standard Terminology for Nondestructive Examinations
ASTM E1316-21d Standard Terminology for Nondestructive Examinations
ASTM E1316-17 Standard Terminology for Nondestructive Examinations
ASTM E1316-21c Standard Terminology for Nondestructive Examinations
ASTM E1316-08 Standard Terminology for Nondestructive Examinations
ASTM E1316-08a Standard Terminology for Nondestructive Examinations
ASTM E1316-09 Standard Terminology for Nondestructive Examinations
ASTM E1316-09a Standard Terminology for Nondestructive Examinations
ASTM E1316-10 Standard Terminology for Nondestructive Examinations
ASTM E1316-21b Standard Terminology for Nondestructive Examinations
ASTM E1316-11a Standard Terminology for Nondestructive Examinations
ASTM E1316-19a Standard Terminology for Nondestructive Examinations
ASTM E1316-20a Standard Terminology for Nondestructive Examinations
ASTM E1316-20 Standard Terminology for Nondestructive Examinations
ASTM E1316-07 Standard Terminology for Nondestructive Examinations
ASTM E1316-13c Standard Terminology for Nondestructive Examinations
ASTM E1316-21 Standard Terminology for Nondestructive Examinations
ASTM E1316-19b Standard Terminology for Nondestructive Examinations
ASTM E1316-10a Standard Terminology for Nondestructive Examinations
ASTM E1316-19 Standard Terminology for Nondestructive Examinations
ASTM E1316-22 Standard Terminology for Nondestructive Examinations
ASTM E1316-22a Standard Terminology for Nondestructive Examinations
ASTM E709-14 Standard Guide for Magnetic Particle Testing
ASTM E1316-17a Standard Terminology for Nondestructive Examinations
ASTM E1316-18 Standard Terminology for Nondestructive Examinations
ASTM E1316-18a Standard Terminology for Nondestructive Examinations
ASTM E1316-12 Standard Terminology for Nondestructive Examinations
ASTM E1316-13 Standard Terminology for Nondestructive Examinations
ASTM E1316-13a Standard Terminology for Nondestructive Examinations
ASTM E1316-13b Standard Terminology for Nondestructive Examinations
ASTM E1316-13d Standard Terminology for Nondestructive Examinations
ASTM E1316-14e1 Standard Terminology for Nondestructive Examinations
ASTM E1316-15 Standard Terminology for Nondestructive Examinations
ASTM E1316-15a Standard Terminology for Nondestructive Examinations
ASTM E1316-16 Standard Terminology for Nondestructive Examinations
ASTM E1316-16a Standard Terminology for Nondestructive Examinations
ASTM C1592/C1592M-09 Standard Guide for Making Quality Nondestructive Assay Measurements
ASTM E155-05 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
ASTM E155-00(2005)e1 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
ASTM E1648-95 Standard Reference Radiographs for Examination of Aluminum Fusion Welds
ASTM E1032-95 Standard Test Method for Radiographic Examination of Weldments
ASTM E1032-01 Standard Test Method for Radiographic Examination of Weldments
ASTM E1032-06 Standard Test Method for Radiographic Examination of Weldments
ASTM E1032-12 Standard Test Method for Radiographic Examination of Weldments
ASTM E1416-23 Standard Practice for Radioscopic Examination of Weldments
ASTM E1648-20 Standard Reference Radiographs for Examination of Aluminum Fusion Welds
ASTM F2696-14(2019) Standard Practice for Inspection of Aircraft Electrical Wiring Systems
ASTM F2696-08 Standard Practice for Inspection of Airplane Electrical Wiring Systems
ASTM E1416-16a Standard Practice for Radioscopic Examination of Weldments
ASTM E1734-23 Standard Practice for Radioscopic Examination of Castings
ASTM C1025-91(2005) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM D2097-03(2005) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM E290-97a(2004) Standard Test Methods for Bend Testing of Material for Ductility
ASTM D2097-03 Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM D2097-03(2010) Standard Test Method for Flex Testing of Finish on Upholstery Leather
ASTM F1575/F1575M-21 Standard Test Method for Determining Bending Yield Moment of Nails
ASTM D4825-97(2002) Standard Test Method for Measurement of Curl in Cut-Sized Office Paper
ASTM C1025-15(2020) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
ASTM F1575-17 Standard Test Method for Determining Bending Yield Moment of Nails
ASTM A977/A977M-07 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D6549-06 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D1830-99(2012) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
ASTM A977/A977M-07(2013) Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D6549-06(2015) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM D7811-13(2022) Standard Test Method for Bow and Skew Using a Measuring Tool
ASTM A977-97 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM G75-07 Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
ASTM D6549-06(2011) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)
ASTM E1891-21 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM D7646-10(2014) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
ASTM E155-20 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
ASTM E155-15 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
ASTM E155-14 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
ASTM F3359-18 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM F3359-19 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM F3359/F3359M-21 Standard Test Method for Determining Bending Yield Moment of Staples
ASTM D3813/D3813M-98(2020) Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
ASTM C158-02(2012) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D4338-97(2021) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
ASTM F584-06 Standard Practice for Visual Inspection of Semiconductor Lead-Bonding Wire
ASTM F584-06e1 Standard Practice for Visual Inspection of Semiconductor Lead-Bonding Wire
ASTM D4602-93(2002) Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
ASTM D4602-93e1 Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
ASTM A773/A773M-01 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM A773/A773M-96 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM A773/A773M-21 Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
ASTM E1891-10a Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient
ASTM A773/A773M-14 Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
ASTM E2698-18 Standard Practice for Radiographic Examination Using Digital Detector Arrays
ASTM E2698-18e1 Standard Practice for Radiographic Examination Using Digital Detector Arrays
ASTM E305-07 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM E305-13 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves
ASTM C1592/C1592M-21 Standard Guide for Making Quality Nondestructive Assay Measurements
ASTM D6515-00(2010) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending

The American Road & Transportation Builders Association, Standard Curve Detection

AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-1986 Standard Method of Test for Family of Curves - One-Point Method HM-22; PART IIB R(2000)
AASHTO R 62-2013 Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
AASHTO T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO MP 12-2004 Standard Practice for Detectable Warning Surfaces
AASHTO TP 133-2021 Standard Method of Test for Determining the Damage Characteristic Curve and Failure Criterion Using Small Specimens in the Asphalt Mixture Performance Tester (AMPT) Cyclic Fatigue Test
AASHTO T 286-1996 Standard Method of Test for Measurement of Vehicular Response to Traveled Surface Roughness HM-22; Part IIA; ASTM Designation E 1082-90(1995) R(2000)

Association Francaise de Normalisation, Standard Curve Detection

NF S30-003*NF ISO 226:2004 Acoustics - Normal equal-loudness-level contours
NF C48-226:1987 Intrusion detection - Active infra-red detectors - Specific standard.
NF C48-231:1988 Intrusion detection - Motion detectors,passive infrared - Specific standard
NF P61-503:1991 Ceramic tiles. Determination of modulus of rupture.
NF G91-108*NF EN 1416:1997 Touch and close fasteners. Determination of curvature.
NF C48-230:1987 Intrusion detection - Ultrasound motion detectors - Specific standard.
NF C48-229:1987 Intrusion detection - Very-high frequency motion detectors - Specific standard.
NF A09-120-3*NF EN ISO 3452-3:2014 Non-destructive testing - Penetrant testing - Part 3 : reference test blocks
NF ISO 11843-5:2008 Capacité de détection - Partie 5 : méthodologie des étalonnages linéaire et non linéaire
NF EN 1779/A1:2004 Essais non destructifs - Contrôle d'étanchéité - Critères de choix de la méthode et de la technique
NF EN 1779:1999 Essais non destructifs - Contrôle d'étanchéité - Critères de choix de la méthode et de la technique

International Organization for Standardization (ISO), Standard Curve Detection

ISO 226:1987 Acoustics; Normal equal-loudness level contours
ISO 226:2023 Acoustics — Normal equal-loudness-level contours
ISO 226:2003 Acoustics - Normal equal-loudness-level contours
ISO 10647:1996 Procedures for calibrating and determining the response of neutron-measuring devices used for radiation protection purposes
ISO/TS 20460:2015 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
ISO 11843-2:2000 Capability of detection - Part 2: Methodology in the linear calibration case

British Standards Institution (BSI), Standard Curve Detection

BS ISO 226:2003 Acoustics - Normal equal-loudness-level contours
BS EN IEC 61853-4:2018 Photovoltaic (PV) module performance testing and energy rating - Standard reference climatic profiles
BS EN 3373-014:2009 Aerospace series - Terminal lugs and in-line splices for crimping on electric conductors - In-line splices, insulated and sealed, for crimping on copper conductors, temperature up to 200 °C - Product standard
BS ISO 11843-2:2000 Capability of detection. Methodology in the linear calibration case
BS ISO 11843-5:2008+A1:2017 Capability of detection - Methodology in the linear and non-linear calibration cases
BS EN ISO 11666:2011 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
BS EN ISO 11666:2010 Non-destructive testing of welds. Ultrasonic testing. Acceptance levels
BS ISO 11843-5:2009 Capability of detection. Methodology in the linear and non-linear calibration cases
BS ISO 11843-5:2008 Capability of detection - Methodology in the linear and non-linear calibration cases

RU-GOST R, Standard Curve Detection

GOST 9735-1987 Profile grinders. Standards of accuracy

Professional Standard - Agriculture, Standard Curve Detection

农业农村部公告第273号 Standard for the detection method of toltrazuril sulfone residues (trial implementation)
14兽药残留检测标准操作规程-2008 Detection method of sulfamethazine residues in pork-enzyme-linked immunosorbent assay
48兽药残留检测标准操作规程-2008 Detection method of 13 kinds of β-lactam drug residues in food of animal origin--Ultra performance liquid chromatography-tandem mass spectrometry
37兽药残留检测标准操作规程-2008 Detection method of 7 fluoroquinolones residues in pork and chicken-high performance liquid chromatography-tandem mass spectrometry
42兽药残留检测标准操作规程-2008 Detection of 11 Hormone Residues in Foods of Animal Origin--Ultra Performance Liquid Chromatography-Tandem Mass Spectrometry
12兽药残留检测标准操作规程-2008 Detection method of amidoalcohol drug residues in fish and shrimp muscle-enzyme-linked immunosorbent assay
2兽药残留检测标准操作规程-2008 Detection method of clenbuterol residues in pig urine-enzyme-linked immunosorbent assay
26兽药残留检测标准操作规程-2008 Determination method of tilmicosin residues in milk-high performance liquid chromatography
17兽药残留检测标准操作规程-2008 Method for the detection of diazepam residues in pig urine-enzyme-linked immunosorbent assay
20兽药残留检测标准操作规程-2008 Determination method of sulfonamide drug residues in porcine muscle-high performance liquid chromatography
9兽药残留检测标准操作规程-2008 Detection method of ractopamine residues in pig urine-enzyme-linked immunosorbent assay
40兽药残留检测标准操作规程-2008 Determination method of pyrilimycin residues in milk-high performance liquid chromatography-tandem mass spectrometry
43兽药残留检测标准操作规程-2008 Determination method of 8 kinds of glucocorticoid drug residues in food of animal origin--Ultra performance liquid chromatography tandem mass spectrometry
22兽药残留检测标准操作规程-2008 Determination method of enrofloxacin and ciprofloxacin residues in food of animal origin--high performance liquid chromatography
23兽药残留检测标准操作规程-2008 Method for the determination of quinic acid and flumequine residues in foods of animal origin (fish)--high performance liquid chromatography
19兽药残留检测标准操作规程-2008 Detection method of abamectin drug residues in beef-enzyme-linked immunosorbent assay
31兽药残留检测标准操作规程-2008 Determination of Ractopamine Residues in Pig Urine--Gas Chromatography-Mass Spectrometry
28兽药残留检测标准操作规程-2008 Method for detection of ceftiofur residues in bovine and porcine tissues--high performance liquid chromatography
7兽药残留检测标准操作规程-2008 Detection method of streptomycin residues in milk-enzyme-linked immunosorbent assay
36兽药残留检测标准操作规程-2008 Method for the detection of seven fluoroquinolones residues in milk--high performance liquid chromatography-tandem mass spectrometry
38兽药残留检测标准操作规程-2008 Detection method of four β-receptor agonist residues in pig urine-high performance liquid chromatography-tandem mass spectrometry
41兽药残留检测标准操作规程-2008 Determination of Nicarbazine Residues in Eggs and Chicken--High Performance Liquid Chromatography-Tandem Mass Spectrometry
39兽药残留检测标准操作规程-2008 Determination method of 9 β-receptor agonist residues in food of animal origin-Ultra performance liquid chromatography-tandem mass spectrometry
15兽药残留检测标准操作规程-2008 Detection method of enrofloxacin residues in pork-enzyme-linked immunosorbent assay
32兽药残留检测标准操作规程-2008 Detection method of ractopamine residues in pig liver-gas chromatography-mass spectrometry
45兽药残留检测标准操作规程-2008 Method for detection of cyromazine and its metabolite melamine residues in food of animal origin--Ultra performance liquid chromatography-tandem mass spectrometry
24兽药残留检测标准操作规程-2008 Determination method for (chicken) quinic acid and flumequine residues in food of animal origin (chicken)--high performance liquid chromatography
25兽药残留检测标准操作规程-2008 Method for the detection of monensin and salinomycin residues in foods of animal origin--high performance liquid chromatography
4兽药残留检测标准操作规程-2008 Method for detection of tetracycline residues in milk-enzyme-linked immunosorbent assay
16兽药残留检测标准操作规程-2008 Detection method of fluoroquinolones residues in pork--enzyme-linked immunosorbent assay
46兽药残留检测标准操作规程-2008 Detection method of five polyether anticoccidial drug residues in chicken--Ultra performance liquid chromatography-tandem mass spectrometry
5兽药残留检测标准操作规程-2008 Determination method of tetracycline drug residues in bovine, pig, chicken and fish tissues-enzyme-linked immunosorbent assay
21兽药残留检测标准操作规程-2008 Determination of danofloxacin, enrofloxacin, ciprofloxacin and sarafloxacin residues in foods of animal origin--high performance liquid chromatography
27兽药残留检测标准操作规程-2008 Determination method of ceftiofur residues in milk-high performance liquid chromatography
10兽药残留检测标准操作规程-2008 Detection method of ractopamine residues in pig liver-enzyme-linked immunosorbent assay
3兽药残留检测标准操作规程-2008 Detection method of clenbuterol residues in pig liver-enzyme-linked immunosorbent assay
8兽药残留检测标准操作规程-2008 Detection method of chloramphenicol residues in chicken tissue-enzyme-linked immunosorbent assay
34兽药残留检测标准操作规程-2008 A method for the detection of nitrofuran metabolite residues in muscle tissue--high performance liquid chromatography-tandem mass spectrometry
6兽药残留检测标准操作规程-2008 Detection method of furazolidone residues in chicken liver-enzyme-linked immunosorbent assay
11兽药残留检测标准操作规程-2008 Detection method of neomycin residues in milk and pork-enzyme-linked immunosorbent assay
44兽药残留检测标准操作规程-2008 Method for the detection of metronidazole, demetonidazole and their metabolite residues in animal food--Ultra performance liquid chromatography-tandem mass spectrometry
30兽药残留检测标准操作规程-2008 Detection method of clenbuterol hydrochloride residues in pig urine-gas chromatography-mass spectrometry
33兽药残留检测标准操作规程-2008 Determination of Tetracycline Drug Residues in Chicken and Pork--High Performance Liquid Chromatography-Tandem Mass Spectrometry
1兽药残留检测标准操作规程-2008 Rules for Writing Veterinary Drug Residue Test Records
47兽药残留检测标准操作规程-2008 Determination method of 8 kinds of aminoglycoside drug residues in food of animal origin-Ultra performance liquid chromatography-tandem mass spectrometry
13兽药残留检测标准操作规程-2008 Detection method of sulfonamide drug residues in pork-enzyme-linked immunosorbent assay
29兽药残留检测标准操作规程-2008 Detection method of clenbuterol hydrochloride residues in pig liver-gas chromatography-mass spectrometry
35兽药残留检测标准操作规程-2008 Detection method of chloramphenicol residues in pig liver tissue--high performance liquid chromatography-tandem mass spectrometry
18兽药残留检测标准操作规程-2008 Detection method of zearalanol residues in pig urine-enzyme-linked immunosorbent assay
GB/T 43167-2023 Standard hard water for pesticide testing

Taiwan Provincial Standard of the People's Republic of China, Standard Curve Detection

CNS 3157-1981 Accuracy Test Standard for Crank Press
CNS 1370-1987 Testing Standard of Electrical Copper Wires
CNS 682-1980 General Rules for Testing Standard of Insulated Wires
CNS 684-1980 Testing Standard for Electric Continuance of Insulated Wires
CNS 35-1947 Standard Testing Temperature
CNS 685-1980 Testing Standard for D. C. Resistance of Insulated Conductors
CNS 686-1980 Testing Standard for Conductivity of Insulated Conductors
CNS 9234-1987 Method of Test for Dry Reed Switches (Standard Test Coils, Single Insulation 130 ℃ Wire)

Korean Agency for Technology and Standards (KATS), Standard Curve Detection

KS I ISO 226:2003 Acoustics-Normal equal-loudness level contours
KS I ISO 226:2014 Acoustics — Normal equal-loudness level contours
KS D 0272-2021 Standard qualification procedure for radiographic testing technique of welds
KS K 1300-2017 Standard for inspection of synthetic fiber filament yarn
KS B 0831-2001(2016) Standard test blocks for ultrasonic testing
KS B ISO 3452-3-2016(2021) Non－destructive testing－Penetrant testing－Part 3：Reference test blocks
KS F 2390-2014 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS D 0272-2005 Standard qualification procedure for radiographic testing technique of welds
KS B 0831-2001(2021) Standard test blocks for ultrasonic testing
KS F 2390-2019 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS Q ISO 11843-2:2009 Capability of detection－Part 2：Methodology in the linear calibration case

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Standard Curve Detection

GB/T 4963-2007 Acoustics.Normal equal-loudness-level contours
GB 4789.9-2014 National Food Safety Standard Food Microbiology Inspection Campylobacter jejuni
GB/T 26628.1-2011 Inspection of grain and oils.Standard atlas of stored grain fungi.Part 1: Aspergillus
GB/T 50602-2010 Radiographic testing standard for a single exposure with γ-ray technique of spherical tank installation
GB/T 36063-2018 Nanotechnologies—Raman shift standard curve for spectrometer calibration
GB/T 18851-2002 Non-destructive testing--Penetrant testing Reference Test blocks
GB/T 50344-2004 Technical standard for inspection of building structure

PK-PSQCA, Standard Curve Detection

PS 122-1985 PAKISTAN STANDARD METHOD FOR THE DETERMINATION OF CRIMP OF YARN IN FABRIC

SE-SIS, Standard Curve Detection

SIS SMS 2027-1975 Dust separating. Standard curves for dust
Nr 39-1992
SIS SS 11 41 30-1979 Radiographic testing — Image quality indicators (IQI)
SIS SS 11 41 30-1979-1 Radiographic testing — Image quality indicators (IQI)
SIS MNC 1106-1981 Non-destructive testing - International standards
SIS SS 11 42 53-1982 Non-destructive testing - Ultrasonic testing - Reference test block type CHNV
SIS SS 11 42 52-1982 Non-destructive testing - Ultrasonic testing - Reference test block type FBHV
SIS SS 11 42 51-1982 Non-destructive testing - Ultrasonic testing - Reference test block type FBHP
SIS SS 11 42 54-1982 Non-destructive testing - Ultrasonic testing - Reference test block type RSNV
SIS SS 11 42 50-1982 Non-destructive testing - Ultrasonic testing - Reference test block type FBHN

German Institute for Standardization, Standard Curve Detection

DIN ISO 226:2006 Acoustics - Normal equal-loudness-level contours (ISO 226:2003);English version of DIN ISO 226:2006-04
DIN 53019-1:1980 Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system
DIN 48051-1:1959-09 Power current overhead lines; bent insulator spindles, standard design
DIN VDE 0472 Bb.1:2005 Testing of cables, wires and flexible cords - List of the standards series DIN VDE 0472 (VDE 0472)
DIN 24163-2:1985 Fans; performance testing, standardized test airways
DIN EN 1779:1999-10 Non-destructive testing - Leak testing - Criteria for the method and technique selection; German version EN 1779:1999

Group Standards of the People's Republic of China, Standard Curve Detection

T/SHZSAQS 00084-2022 Formaldehyde standard curve preparation technical regulations
T/CECS 1068-2022 Reliability Appraisal Standards for Hyperbolic Cooling Towers
T/HNCAA 027-2021 Verification of inspection and testing standard methods
T/CSCS 047-2023 Technical standards for inspection and appraisal of high-speed railway cross-line steel structures
T/CECS 698-2020 Indoor PM2.5 detection equipment performance inspection standard
T/CECS 1103-2022 Engineering Bamboo Structure Testing Standard
T/CECS 725-2020 Technical Standards for Green Building Testing
T/CITS 0010-2022 Technical specification for grade assessment of Inspection and testing enterprise safety and health management system

U.S. Air Force, Standard Curve Detection

AIR FORCE MS27832-1968 GAGE - INSPECTION FOR MS27828 CRIMPING TOOL AND MS27831 MINIATURE CRIMPING TOOL

CH-SNV, Standard Curve Detection

VSM 16109-1970

National Metrological Verification Regulations of the People's Republic of China, Standard Curve Detection

JJG 872-1994 Verification Regulation of Standard Measuring Coils of Magnetic Flux
JJG 1088-2013 Verification Regulation of Standard Devices for Calibration of Ophthalmometers
JJG 493-1987 Verification Rigulation for Audio Magnetic Properties of Standard Specimen of Soft Magnetic Materials (A-C Magnetization Curve and Amplitude Permeability)
JJG 69-1990 Verification Regulation of RF Q Standard Coil
JJG 71-1991 Verification Regulation of Standard Metallic Scale(GradeIII)
JJG(核工) 10-1991 Verification method for measuring point gamma ray source by standard grade germanium gamma spectrometer
JJG 144-1992 Verification Regulation of Standard Dynamometer
JJG 144-2007 Verification Regulation of Standard Dynamometers
JJG 808-2014 Standard Lever for Measuring Force
JJG 808-1993 Verification Regulation of Standard Lever for Measuring Force

API - American Petroleum Institute, Standard Curve Detection

API STD 1163 RUSSIAN-2013 In-line Inspection Systems Qualification Standard (ВТОРОЕ ИЗДАНИЕ)
API STD 1163-2005 In-line Inspection Systems Qualification Standard (First Edition)
API STD 1163-2013 In-line Inspection Systems Qualification Standard (Second Edition)

Society of Automotive Engineers (SAE), Standard Curve Detection

SAE J739-1991 Cutting Edge - Curved Grader, Standard June 1991
ANSI B92.1-1996 Involute Splines and Inspection Standard
SAE ANSI B92.2M-1989 Metric Involute Splines and Inspection Standard
SAE ARD50102-1989 Metric Involute Splines and Inspection Standard
SAE J2297-1996 Ultraviolet Leak Detection: Stability and Compatibility Criteria of Fluorescent Refrigerant Leak Detection Dyes for Mobile R-134a Air- Conditioning Systems, Standard September 1996

Institute of Electrical and Electronics Engineers (IEEE), Standard Curve Detection

IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions
IEEE/ANSI N42.47-2010 American National Standard for Measuring the Imaging Performance of X-ray and Gamma-ray Systems for Security Screening of Humans
ANSI/IEEE Std 149-1979 IEEE Standard Test Procedures for Antennas
IEEE 149-1965 IEEE Standards Test Procedure for Antennas
IEEE Std 149-1955*ANSI C16.11-1971 IEEE Standards Test Procedure for Antennas
IEEE 149-1977 IEEE Standard Test Procedures for Antennas

HU-MSZT, Standard Curve Detection

工业和信息化部/国家能源局, Standard Curve Detection

JB/T 13051-2017 High-power diesel engine crankshaft cleanliness limits and testing method standards

American National Standards Institute （ANSI), Standard Curve Detection

ANSI/IEEE C37.112:1996 Standard Inverse-Time Characteristic for Overcurrent Relays
ANSI B92.1, 1A-1996 Involute Splines and Inspection Standard
ANSI B92.2M-1989 Metric Involute Splines and Inspection Standard
ASTM E1316-23b Standard Terminology for Nondestructive Examinations (Standard + Redline PDF Bundle)
ANSI/IEEE 1222:2011 Standard for Testing and Performance for All-Dielectric Self Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines

IT-UNI, Standard Curve Detection

UNI S 195-1943

National Metrological Technical Specifications of the People's Republic of China, Standard Curve Detection

JJF 2023-2023

YU-JUS, Standard Curve Detection

JUS U.J1.070-1986 Fire protection. Standard time-temperature curve in fire resistance test furnaces for constructions
JUS U.M1.042-1987 Determination of ultrasonic pulse velocity and calibration curve

AWS - American Welding Society, Standard Curve Detection

PRG-1995 The Practical Reference Guide for Radiographic Inspection - Acceptance Criteria

American Society of Mechanical Engineers (ASME), Standard Curve Detection

ASME SEC V B SE-1030-2003 Standard Test Method for Radiographic Examination of Metallic Castings ASTM E 1030-00
ASME SEC V B SE-1416-2001 Standard Test Method for Radioscopic Examination of Weldments ASTM E1416-96
ASME SEC V B SE-1647-2002 Standard Practice for Determining Contrast Sensitivity in Radioscopy ASTM E1647-98a
ASME SEC V B SE-1255-2001 Standard Practice for Radioscopy ASTM E1255-96
ASME SEC V B SE-94-2003 Standard Guide for Radiographic Testing ASTM E 94-00
ASME STP-PT-094-2022 Determination of Stress Strain Curves of 304, 304L, 316, 316L for Strain-Based Design Criteria

Professional Standard - Petroleum, Standard Curve Detection

SY/T 0455-2004 Standard for γ-ray full view exposure technique of spherical tank

Defense Logistics Agency, Standard Curve Detection

DLA DSCC-DWG-10006-2010 RESISTOR, CURRENT SENSE, OPEN AIR, STANDARD LEADS, 1 WATT
DLA DSCC-DWG-10007-2010 RESISTOR, CURRENT SENSE, OPEN AIR, STANDARD LEADS, 3 WATT
DLA DSCC-DWG-10008-2010 RESISTOR, CURRENT SENSE, OPEN AIR, STANDARD LEADS, 5 WATT

Danish Standards Foundation, Standard Curve Detection

Standardpakke - Ikke-destruktiv proevning - Penetr Standards Package – Non-destructive testing – Penetrant testing
DS/EN 1779/A1:2004 Non-destructive testing - Leak testing - Criteria for method and technique selection
DS/EN 1779:2002 Non-destructive testing - Leak testing - Criteria for method and technique selection

未注明发布机构, Standard Curve Detection

NF P61-503 Ceramic tiles. Determination of bending resistance. (European Standard EN 100)
BS EN 1779:1999(2008) Non - destructive testing — Leak testing — Criteria formethodand technique selection

American Welding Society (AWS), Standard Curve Detection

AWS PRG-1995 The Practical Reference Guide for Radiographic Inspection - Acceptance Criteria

NEMA - National Electrical Manufacturers Association, Standard Curve Detection

NEMA SBP 2-2014 Multi-Criteria Detectors (MCD)

RO-ASRO, Standard Curve Detection

STAS 6901-1978 Psycho-physiological acou stics STANDARD CURVES OF EQUAL LOUDNESS LEVEL AND RELATIONS BETWEEN SOUND PRESSURE LEVELS
STAS 6300-1981 STANDARD ATMOSPHERES FOR CONDITIONING AND (OR) TESTING

National Association of Corrosion Engineers (NACE), Standard Curve Detection

NACE RP0197-1997 Standard Format for Computerized Electrochemical Polarization Curve Data Files
NACE RP0197-2004 Standard Format for Computerized Electrochemical Polarization Curve Data Files Item No. 21080

VE-FONDONORMA, Standard Curve Detection

AT-ON, Standard Curve Detection

ONORM E 1380-1971 Testing Devices, Standard Test Pin D

Professional Standard - Aerospace, Standard Curve Detection

QJ 2359-1992 Standard antenna for testing

Professional Standard - Aviation, Standard Curve Detection

HB 5434.6-1989 Method for determination of standard flexural strength of aircraft wheel brakes

Japanese Industrial Standards Committee (JISC), Standard Curve Detection

JIS Z 2345-4:2018 Standard test blocks for ultrasonic testing -- Part 4: Standard test blocks for angle beam ultrasonic testing
JIS Z 2345:2000 Standard test blocks for ultrasonic testing

卫生健康委员会, Standard Curve Detection

WS/T 794-2022 Blood transfusion compatibility testing standards

Shandong Provincial Standard of the People's Republic of China, Standard Curve Detection

DB37/T 5255-2023 Technical Standard for Cement and Soil Testing

国家市场监督管理总局、中国国家标准化管理委员会, Standard Curve Detection

GB/T 41114-2021 Non-destructive testing—Ultrasonic testing—Specification for a calibration block for phased array testing(PAUT)

Professional Standard - Recommended Standards for Engineering Construction, Standard Curve Detection

CECS 70-1994 STANDARD OF INSPECTION AND MEASUREMENT OF RAY PHOTOGRAPHING FOR METAL MELTING MELD SEAM OF BUILDING INSTALLATION ENGINEERING

Professional Standard - Tobacco, Standard Curve Detection

YC/T 169.3-2002 Testing physical and chemical characteristics of tow for cigarette----Part 3: Crimp number

Shanxi Provincial Standard of the People's Republic of China, Standard Curve Detection

DB1404/T 3-2021 Standard text management requirements for inspection and testing institutions
DB14/T 2499-2022 Guidelines for the management and application of reference materials for chemical testing by inspection and testing institutions

Lithuanian Standards Office , Standard Curve Detection

LST EN 1779-2001 Non-destructive testing - Leak testing - Criteria for method and technique selection
LST EN 1779-2001/A1-2004 Non-destructive testing - Leak testing - Criteria for method and technique selection

AENOR, Standard Curve Detection

UNE-EN 1779/A1:2004 Non-destructive testing - Leak testing - Criteria for method and technique selection

Indonesia Standards, Standard Curve Detection

SNI ASTM C674:2010 Standart Test Methods for Flexural Properties of Ceramic Whiteware Materials1

National Health Commission of the People's Republic of China, Standard Curve Detection

GB 5009.150-2016 Determination of Monascus Pigment in National Food Safety Standard Food

Professional Standard - Construction Industry, Standard Curve Detection

JGJ/T 132-2009 Standard for energy efficiency test of residential buildings
JGJ/T 177-2009 Public Building Energy Conservation Testing Standards

Professional Standard - Urban Construction, Standard Curve Detection

GB/T 50344-2019 "Technical Standards for Building Structure Testing"

Jilin Provincial Standard of the People's Republic of China, Standard Curve Detection

DB22/T 5124-2022 Technical Standards for Green Building Testing

PL-PKN, Standard Curve Detection

PN BN 6301-03-1965

Military Standard of the People's Republic of China-General Armament Department, Standard Curve Detection

GJB 21.1A-1992 Telemetry standard radio channel

ZA-SANS, Standard Curve Detection

SANS 1698:2007 Verification standards for the verification of volume-measuring instruments, including commercial standards of volume