ZH
RU
ES
Factory boundary inspection
Factory boundary inspection, Total:87 items.
In the international standard classification, Factory boundary inspection involves: Railway rolling stock, Occupational safety. Industrial hygiene, Protection against fire, Nuclear energy engineering, Power stations in general, Fasteners, Railway engineering in general, Electricity. Magnetism. Electrical and magnetic measurements, Energy and heat transfer engineering in general, Special purpose vehicles, Wastes, Burners. Boilers, Languages used in information technology, Elements of buildings.
Professional Standard - Coal, Factory boundary inspection
API - American Petroleum Institute, Factory boundary inspection
- API IRE APP-1978 GUIDE FOR INSPECTION OF REFINERY EQUIPMENT APPENDIX - INSPECTION OF WELDING (THIRD EDITION)
- API PUBL 2002-1984 Inspection for Accident Prevention in Refineries (First Edition)
- API RPRI P5-1954 RECOMMENDED PRACTICES FOR REFINERY INSPECTIONS PART V-INSTRUMENTS
- API RP 574-1990 Inspection of Piping@ Tubing@ Valves@ and Fittings (First Edition; Replaces Guide for Inspection of Refinery Equipment Chapter XI)
- API RPRI P4-1951 RECOMMENDED PRACTICES FOR REFINERY INSPECTIONS PART IV-LOW-PRESSURE STORAGE TANKS
- API RPRI P2-1949 RECOMMENDED PRACTICES FOR REFINERY INSPECTIONS PART II-PRESSURE-RELIEVING DEVICES
- API RPRI P1-1948 RECOMMENDED PRACTICES FOR REFINERY INSPECTIONS PART I-PROCESS EQUIPMENT
- API RPRI P3-1950 RECOMMENDED PRACTICES FOR REFINERY INSPECTIONS PART III - FIRE-PROTECTION EQUIPMENT
- API RP 510-1975 Inspection@ Rating@ and Repair of Pressure Vessels in Petroleum Refinery Service (Third Edition)
- API IRE C16-1974 Guide for Inspection of Refinery Equipment Chapter XVI - Pressure-Relieving devices (SECOND EDITION)
- API IRE C16-1985 Guide for Inspection of Refinery Equipment Chapter XVI-Pressure-Relieving devices (THIRD EDITION)
- API RP 510-1970 Inspection@ Rating@ and Repair of Pressure Vessels in Petroleum Refinery Service (SECOND EDITION; ERTA: 1970)
- API IRE C11-1974 GUIDE FOR INSPECTION OF REFINERY EQUIPMENT CHAPTER XI PIPE@ VALVES@ AND FITTINGS (Second Edition)
- API IRE C6-1982 Guide for Inspection of Refinery Equipment Chapter VI-Pressure Vessels (Towers@ Drums@ and Reactors) (FOURTH EDITION)
- API IRE C5-1972 GUIDE FOR INSPECTION OF REFINERY EQUIPMENT CHAPTER V PREPARATION OF EQUIPMENT FOR SAFE ENTRY AND WORK (SECOND EDITION)
- API IRE C5-1978 GUIDE FOR INSPECTION OF REFINERY EQUIPMENT CHAPTER V-PREPARATION OF EQUIPMENT FOR SAFE ENTRY AND WORK (THIRD EDITION)
- API IRE C10-1976 Guide for Inspection of Refinery Equipment Chapter X Pumps@ compressors@ and blowers@ and their drivers (Second Edition)
- API IRE C10-1961 Guide for Inspection of Refinery Equipment Chapter X Pumps@ compressors@ and blowers@ and their drivers (First Edition)
- API RP 510-1958 RECOMMENDED PRACTICE FOR INSPECTION@ REPAIR@ AND RATING OF UNFIRED PRESSURE VESSELS IN SERVICE IN PETROLEUM REFINERIES (First Edition)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Factory boundary inspection
- GB/T 16904.1-2006 Checking of rolling stock clearance for standard gauge railways.Part 1:Methods for inspecting
- GB/T 16904.2-2006 Checking of rolling stock clearance for standard gauge railways.Part 2:clearance treadle
- GB/T 16904.1-1997 Rolling stock gauges for standard gauge railways. The general rules and methods for inspecting of rolling stock gauge
Professional Standard - Nuclear Industry, Factory boundary inspection
- EJ/T 516-1990 Qualifications of nuclear power plant inspection, inspection and test personnel
- EJ/T 1022.9-1996 Ex-factory inspection and test of valve products in pressurized water reactor nuclear power plant
- EJ/T 1041-1996 Code on the in-service inspections of mechanical components of pressurized water reactor nuclear islands
- EJ/T 1034-1996 Accessibility criteria for in-service inspections in structural design of pressurized water reactor nuclear power plants
- EJ/T 606-1991 Ultrasonic In-Service Inspection of Reactor Pressure Vessel Welds in PWR Nuclear Power Plants
- EJ/T 626-1992 Requirements for installation, inspection and testing of nuclear power plant electrical, instrumentation and control equipment
- EJ/T 517-1990 Quality assurance requirements for installation, inspection and testing of mechanical items during construction of pressurized water reactor nuclear power plants
Natural Gas Processor's Association (NGPA), Factory boundary inspection
- GPA 1997-1997 Plant Project and Design Check List; 1997
- GPA 1981-1981 Check Lists for Energy Conservation in Gas Processing Plants; 1981
Professional Standard - Public Safety Standards, Factory boundary inspection
- GA 1035-2012 General requirements for factory inspection of fire products
IAEA - International Atomic Energy Agency, Factory boundary inspection
- NS-G-2.6-2002 Maintenance@ Surveillance and In-service Inspection in Nuclear Power Plants
应急管理部, Factory boundary inspection
- XF 1035-2012 General requirements for factory inspection of fire protection products
RO-ASRO, Factory boundary inspection
Professional Standard - Railway, Factory boundary inspection
- TB/T 2811.3-1997 No. 13 hook tail frame 777 size factory repair inspection sample
- TB/T 2811.1-1997 No. 13 coupler frame pin hole length and frame body thickness factory repair inspection sample
- TB/T 2811.2-1997 No. 13 hook tail frame matching surface height and frame body width factory repair inspection sample
Professional Standard - Energy, Factory boundary inspection
- NB/T 20010.9-2010 PWR nuclear power plant valve-Part 9: Final examination and test in manufactory
- NB/T 20564-2019 Poolside inspection of irradiated fuel assembly in pressure water reactor nuclear power plant
- NB/T 20221-2013 Corrosion inspection of secondary thermodynamic equipments of pressure water reactor nuclear power plant
- NB/T 20312-2014 Code on the in-service inspections of mechanical components of pressurized water reactor nuclear islands
- NB/T 20191-2012 Accessibility Criteria for In-service Inspection in Structural Design of PWR Nuclear Power Plant
- NB/T 20630-2021 Process and requirements of risk-informed method for in-service inspection optimization of nuclear power plant pipeline welds
American Welding Society (AWS), Factory boundary inspection
- AWS C3.3-2008 Recommended Practices for Design, Manufacture, and Examination of Critical Brazed Components (Third Edition)
Professional Standard - Electricity, Factory boundary inspection
- DL/T 1115-2009 Guide for chemistry check-up of unit maintenance in fossil fuel power plant
- DL/T 1115-2019 Guidelines for chemical inspection of thermal power plant unit overhaul
- DL/T 2447-2021 Technical regulations for safety inspection of anti-flooding workshops of hydropower stations
- DL 443-1991 General specification of hydraulic turbine generator units delivery inspection
Group Standards of the People's Republic of China, Factory boundary inspection
- T/CNEA 012-2021 The periodic inspect and in-service test of squib valve in nuclear power plant
- T/CAPID 005.2-2023 The outline of quality supervision and inspection of multiple solid waste combustion for power generation projects—Part 2: Supervision and inspection before the main plant structure topped off
- T/CAPID 005.4-2023 The outline of quality supervision and inspection of multiple solid waste combustion for power generation projects—Part 4: Supervision and inspection of before power receiving of the power plant electrical system
- T/CNSCPA 009-2023 Review guidelines for safety inspection application documents of import heat exchange tubes for steam generator of pressurized water reactor nuclear power plants
- T/CNSCPA 009-2023*:2023 Review guidelines for safety inspection application documents of import heat exchange tubes for steam generator of pressurized water reactor nuclear power plants
国家市场监督管理总局、中国国家标准化管理委员会, Factory boundary inspection
Military Standard of the People's Republic of China-General Armament Department, Factory boundary inspection
- GJB 3916A-2006 Requirements for quality work of leaving the factory inspection handing over and dispatch of equipments
- GJB 3916-1999 Weapons and equipment factory inspection, handover and shipment quality supervision requirements
American Society of Mechanical Engineers (ASME), Factory boundary inspection
American National Standards Institute （ANSI), Factory boundary inspection
Canadian Standards Association (CSA), Factory boundary inspection
- CSA N285.7-2015 Periodic inspection of CANDU nuclear power plant balance of plant systems and components (First Edition)
- CAN/CSA-ISO/IEC TR 24731-1:2012 Information technology — Programming languages, their environments and system software interfaces — Extensions to the C library — Part 1: Bounds-checking interfaces
ES-UNE, Factory boundary inspection
- UNE 192011-3:2019 Procedure for the regulatory inspection. Pressure equipment. Part 3: Specific requirements for refineries and petrochemical plants
U.S. Military Regulations and Norms, Factory boundary inspection
American Society for Testing and Materials (ASTM), Factory boundary inspection
- ASTM D5139-90(2001) Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
EEMUA - Engineering Equipment and Materials Users Association, Factory boundary inspection
- PUB NO 149-1997 Code of Practice for the Identification and Checking of Materials of Construction in Pressure Systems in Process Plants
Jiangsu Provincial Standard of the People's Republic of China, Factory boundary inspection
- DB3208/T 154-2021 Specifications for daily maintenance and inspection of special motor vehicles in the field (factory)
国家能源局, Factory boundary inspection
- NB/T 20505-2018 In-service inspection requirements for prestressed concrete containment structures of nuclear power plants
- NB/T 20466-2017 Hydraulic cleaning and cleanliness video inspection of secondary side tube sheets of vertical steam generators in nuclear power plants
未注明发布机构, Factory boundary inspection
- NB 20505-2018 In-service inspection requirements for prestressed concrete containment structures of nuclear power plants
ACI - American Concrete Institute, Factory boundary inspection
- ACI 311.5R-1995 Guide for Specifying Batch Plant Inspection and Field Testing of Ready-Mixed Concrete
Engineering Equipment and Materials Users Association （EEMUA), Factory boundary inspection
- EEMUA PUB NO 149-1997 Code of Practice for the Identification and Checking of Materials of Construction in Pressure Systems in Process Plants
Yunnan Provincial Standard of the People's Republic of China, Factory boundary inspection
- DB5301/T 46-2020 Technical Guidelines for Environmental Protection Inspection of Sludge Treatment and Disposal Enterprises in Urban Sewage Treatment Plants
British Standards Institution (BSI), Factory boundary inspection
- ASME 11 DIV2-2019 Section XI, Rules for Inservice Inspection of Nuclear Power Plant Components - Division 2, Requirements for Reliability and Integrity Management (RIM) Programs for Nuclear Power Plants
- ASME 11 DIV2-2021 Section XI, Rules for Inservice Inspection of Nuclear Power Plant Components - Division 2, Requirements for Reliability and Integrity Management (RIM) Programs for Nuclear Power Plants
AT-ON, Factory boundary inspection
- ONORM M 9401-1997 Scouring plants - Concepts, requirements for installation and use - Emission limits for halogenated hydrocarbons - Checking and maintenance
RU-GOST R, Factory boundary inspection
- GOST R 59579-2021 Translusent enclosing structures. Assembling and mounting from factory-ready kits. Rules and check for fulfillment of works
WRC - Welding Research Council, Factory boundary inspection
- BULLETIN 517-2006 EXAMINATION OF MECHANICAL PROPERTIES AND CORROSION OF HIGH TEMPERATURE ALLOYS AFTER LONG TERM SERVICE UNDER ADVANCED POWER PLANT BOILER CONDITIONS THE EDDYSTONE STUDIES