ZH
RU
ES

Specific curl plus or minus

Specific curl plus or minus, Total:90 items.

In the international standard classification, Specific curl plus or minus involves: Analytical chemistry, Rubber and plastics products, Fluid power systems, Road vehicles in general, Commercial vehicles, Aerospace engines and propulsion systems, Gears, Electrical wires and cables, Solar energy engineering, Materials for aerospace construction, Farming and forestry, Measurement of volume, mass, density, viscosity, Rotating machinery, Products of the chemical industry, Petroleum products in general, Products of the textile industry, Paint ingredients, Thermodynamics and temperature measurements, Medical equipment, Switchgear and controlgear, Plastics, Packaging materials and accessories, Components for aerospace construction, Fruits. Vegetables, Reinforced plastics.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Specific curl plus or minus

GB/T 613-2007 Chemical reagent.General method for the determination of specific optical rotatory power(specific optical rotation)
GB/T 613-1988 Chemical reagent--General method for the determination of specific optical rotation

Professional Standard - Chemical Industry, Specific curl plus or minus

HG/T 3880-2006 Pressure and vacuum resistant rubber covered rotary shaft lip seals

GM Europe, Specific curl plus or minus

GME QK 000542-1983 PUR-Elastomer (57 ?3) Shore D PUR-Elastomer (57 ?3) Shore D German
GME QK 000553-1985 PUR-Elastomer (75 ?5) Shore A PUR-Elastomer (75 ?5) Shore A German

Society of Automotive Engineers (SAE), Specific curl plus or minus

SAE J2420-2010 COE Frontal Strength Evaluation-Dynamic Loading Heavy Trucks
SAE AS3472A-1996 Ring, Retaining - Internal, Spiral Wound Heavy and Medium Duty, UNS S66286 UNS S66286; FSC 5365

SAE - SAE International, Specific curl plus or minus

SAE J2420-1998 COE Frontal Strength Evaluation - Dynamic Loading Heavy Trucks

Professional Standard - Agriculture, Specific curl plus or minus

GB/T 613-2007(XG1-2009) Amendment No. 1 of National Standard "General Method for Determination of Specific Optical Rotation Power (Specific Optical Rotation) of Chemical Reagents"
NY/T 1860.18-2016 Guidelines on the determination of physico-chemical properties of pesticides.Part 18: Specific optical rotation
NY/T 1860.18-2010 Guidance on the determination of physico-chemical properties of pesticides.Part 18:Specific optical rotation

Association Francaise de Normalisation, Specific curl plus or minus

XP ISO/TS 6336-20:2022 Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 20 : Calcul de la capacité de charge au grippage - Méthode de la température-éclair
NF L19-046:1993 Aerospace series. Honeycomb materials with tubular cells, hexagonal, fibre glass, polymimide resin impregnated, oriented at plus over minus 45 degrees. Product standard.
NF C51-286:2004 Rotating electrical machines - Equivalent loading and super-position techniques - Indirect testing to determine temperature rise.
XP ISO TS 6336-21:2022 Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 21 : Calcul de la capacité de charge au grippage - Méthode de la température intégrale
NF EN 3227:2010 Série aérospatiale - Écrous hexagonaux ordinaires, hauteur normale, surplats normaux, en acier, cadmiés, filetage à gauche - Classification : 1 100 MPa (à température ambiante) / 235oC
NF E23-030-5*NF ISO 6336-5:2017 Calculation of load capacity of spur and helical gears - Part 5 : strength and quality of materials
NF ISO 6336-5:2017 Calcul de la capacité de charge des engrenages cylindriques à dentures droite et hélicoïdale - Partie 5 : résistance et qualité des matériaux
NF ISO 2407/A1:2016 Conditions d'essai des machines à rectifier les surfaces de révolution intérieures à broche horizontale - Contrôle de la précision - Amendement 1
NF EN ISO 18314-2:2023 Analyse colorimétrique - Partie 2 : correction de Saunderson, solutions de l'équation de Kubelka-Munk, pouvoir colorant, profondeur de teinte et pouvoir masquant
NF T51-035-2/A1:2012 Plastics - Determination of Charpy impact properties - Part 2 : instrumented impact test - Amendment 1 : précision data.
NF L19-037:1993 Aéronautique et espace - Matériaux alvéolaires à cellules tubulaires hexagonales en tissu de carbone orienté à plus ou moins 45 degrés imprégné de résine phénolique - Norme de produit.
NF L19-041:1993 Aerospace series. Honeycomb materials with tubular cells, rectangular, fibre glass, phenolic resin impregnated, oriented at plus over minus 45 degrees. Product standard.
NF L19-040:1993 Aerospace series. Honeycomb materials tubular cells, hexagonal, fibre glass, phenolic resin impregnated, oriented at plus over minus 45 degrees. Product standard.

Taiwan Provincial Standard of the People's Republic of China, Specific curl plus or minus

CNS 6407-1984 Calculation of Load Capacity for Cylindrical and Bevel Gears-Load Sharing Factor Ｙε and Overlap Ratio εβ
CNS 15032-2006 Solar energy - Calibration of field pyrheliometers by comparison to a reference pyrheliometer
CNS 6410-1984 Calculation of Load Capacity for Cylindrical and Bevel Gears-Pinion Single Tooth Contact Factor ZB Wheel Single Tooth Contact Factor ZD and Transverse Contact Ratio εα

European Association of Aerospace Industries, Specific curl plus or minus

AECMA PREN 2623-1986 Aerospace Series Electrical Cables for General Purpose Operating Temperatures between - 55 Degrees Celsius and + 135 Degrees Celsius Issue P 1
AECMA PREN 2712-007-1991 Aerospace Series Single and Multicore Electrical Cables Screened (Spiral) and Jacketed for General Use Operating Temperatures Between -55 and +150 Degrees Celsius UV Laser Printable Product Standard
AECMA PREN 2712-003-1995 Aerospace Series Cables, Electrical, Single and Multicore for General Purpose Operating Temperatures between - 55 Degrees C and 150 Degrees C Part 003: Screened (Spiral) and Jacketed, Ink Jet Printable Product Standard Edition P 1
AECMA PREN 2712-004-1995 Aerospace Series Cables, Electrical, Single and Multicore for General Purpose Operating Temperatures between - 55 Degrees C and 150 Degrees C Part 004: Screened (Braided) and Jacketed, Ink Jet Printable Product Standard Edition P 1
AECMA PREN 2713-003-1995 Aerospace Series Cables, Electrical, Single and Multicore for General Purpose Operating Temperatures between - 55 Degrees C and 200 Degrees C Part 003 : Screened (Spiral) and Jacketed, Ink Jet Printable Product Standard Edition P 1
AECMA PREN 2713-004-1995 Aerospace Series Cables, Electrical, Single and Multicore for General Purpose Operating Temperatures between - 55 Degrees C and 200 Degrees C Part 004 : Screened (Braided) and Jacketed, Ink Jet Printable Product Standard Edition P 1
AECMA PREN 2714-003-1995 Aerospace Series Cables, Electrical, Single and Multicore for General Purpose Operating Temperatures between - 55 Degrees C and 260 Degrees C Part 003 : Screened (Spiral) and Jacketed, Ink Jet Printable Product Standard Edition P 1
AECMA PREN 2714-005-1995 Aerospace Series Cables, Electrical, Single and Multicore for General Purpose Operating Temperatures between - 55 Degrees C and 260 Degrees C Part 005 : Screened (Spiral) and Jacketed, CO2 Laser Printable Product Standard Editon P 1
AECMA PREN 2714-007-1995 Aerospace Series Cables, Electrical, Single and Multicore for General Purpose Operating Temperatures between - 55 Degrees C and 260 Degrees C Part 007 : Screened (Spiral) and Jacketed, UV Laser Printable Product Standard Edition P 1

German Institute for Standardization, Specific curl plus or minus

DIN 804:1977-03 Machine Tools; On-load Speeds for Machine Tools; Nominal Values, Limiting Values, Transmission Ratios
DIN 53018-2:1976 Viscometry; Measurement of the Dynamic Viscosity of Newtonian Fluids with Rotational Viscometers; Sources of Errors and Corrections concerning Cylinder; Rotation Viscometers
DIN 53019-3:2008 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 3: Errors of measurement and corrections
DIN 53019-3:2008-09 Viscometry - Measurement of viscosities and flow curves by means of rotational viscometers - Part 3: Errors of measurement and corrections
DIN EN 3227:2010-06 Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, in steel, cadmium plated, left hand thread - Classification: 1100 MPa (at ambient temperature) / 235 °C; German and English version EN 3227:2010
DIN EN ISO 3838/A1:2023-07 Crude petroleum and liquid or solid petroleum products - Determination of density or relative density - Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods - Amendment 1 (ISO 3838:2004/DAM 1:2023); German and English version EN ...
DIN EN ISO 18314-2:2023-03 Analytical colorimetry - Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, depth of shade, hiding power (ISO 18314-2:2023); German version EN ISO 18314-2:2023
DIN EN 3229:2010-04 Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated, left hand thread - Classification: 900 MPa (at ambient temperature)/235 °C; German and English version EN 3229:2009
DIN EN 4424:2007 Aerospace series - Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 × thread diameter in titanium alloys - Dimensions and loads; German and English version EN 4424:2006

American Gear Manufacturers Association, Specific curl plus or minus

AGMA 93FTMS1-1993 Spur Gear Bending Strength Geometry Factors: A Comparison of AGMA and ISO Methods
AGMA 01FTM8-2001 The Effect of Spacing Errors and Runout on Transverse Load Sharing and the Dynamic Factor of Spur and Helical Gears

AGMA - American Gear Manufacturers Association, Specific curl plus or minus

93FTMS1-1993 Spur Gear Bending Strength Geometry Factors: A Comparison of AGMA and ISO Methods

CENELEC - European Committee for Electrotechnical Standardization, Specific curl plus or minus

EN 61986:2002 Rotating Electrical Machines - Equivalent Loading and Super-Position Techniques - Indirect Testing to Determine Temperature

National Aeronautics and Space Administration (NASA), Specific curl plus or minus

NASA NACA-TR-1336-1957 An investigation of single- and dual-rotation propellers at positive and negative thrust, and in combination with an NACA 1-series D-type cowling at Mach numbers up to 0.84
NASA NACA-RM-A7K03-1948 Low-speed investigation of a small triangular wing of aspect ratio 2.0 I : the effect of combination with a body revolution and height above a ground plane

British Standards Institution (BSI), Specific curl plus or minus

BS ISO 6336-3:2019 Calculation of load capacity of spur and helical gears - Calculation of tooth bending strength
BS ISO 6336-5:2016 Tracked Changes. Calculation of load capacity of spur and helical gears. Strength and quality of materials
BS EN ISO 18314-2:2023 Tracked Changes. Analytical colorimetry. Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, depth of shade, hiding power
18/30377016 DC BS ISO 6336-3. Calculation of load capacity of spur and helical gears. Part 3. Calculation of tooth bending strength
22/30446081 DC BS EN ISO 18314-2. Analytical colorimetry. Part 2. Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, depth of shade, hiding power
PD ISO/TS 6336-21:2022 Calculation of load capacity of spur and helical gears. Part 21: Calculation of scuffing load capacity — Integral temperature method
BS EN 60947-8:2003+A2:2012 Low-voltage switchgear and controlgear. Control units for built-in thermal protection (PTC) for rotating electrical machines

National Metrological Verification Regulations of the People's Republic of China, Specific curl plus or minus

JJG(核工) 13-1991 Method for measuring the specific activity of B radioactive solution with 4πβ flow gas proportional counter standard device
JJG(核工) 17-1991 Test Method for Determination of Radioactive Gas Activity Using Inner Gas Proportional Counting Standard Device

Japanese Industrial Standards Committee (JISC), Specific curl plus or minus

JIS B 1755:1999 Calculation of load capacity of spur and helical gears -- Strength and quality of materials
JIS K 7019:1999 Fiber-reinforced plastic composites -- Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus and minus 45 degree SIGN tension test method

API - American Petroleum Institute, Specific curl plus or minus

API MPMS 11.1 VOL II-1980 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume II Table 5B - Generalized Products Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6B - Generalized Products Correction of Volume to 60 Degre
API 30-32007-1982 A COMPARISON OF THE RATE OF DEVELOPMENT OF HEXANE NEUROPATHY IN WEANLING AND YOUNG ADULT RATS
API MPMS 11.1 VOL XIII-1982 Manual of Petroleum Measurement Standards Chapter 11.1 - Volume Correction Factors Volume XIII Table 5D-Generalized Lubricating Oils Correction of Observed API Gravity to API Gravity at 60 Degrees F Table 6D-Generalized Lubricating Oils Correction of Volu

RU-GOST R, Specific curl plus or minus

GOST 14618.9-1978 Essential oils, aromatics and their intermediates. Method for determination of angle of optical rotation and specific rotation value of polarization flat

International Organization for Standardization (ISO), Specific curl plus or minus

ISO 3838:2004/DAmd 1 Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods — Amendment 1
ISO 3838:2004/PRF Amd 1:2023 Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods — Amendment 1
ISO 3675:1998/AWI Amd 1 Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method — Amendment 1
ISO 7758:1984 Wrought copper and copper alloys; Drawn square bars; Symmetric plus and minus tolerances on width across flats and form tolerances
ISO 7757:1984 Wrought copper and copper alloys; Drawn hexagonal bars; Symmetric plus and minus tolerances on width across flats and form tolerances

CZ-CSN, Specific curl plus or minus

CSN ISO 2632-1:1994 Roughness comparison specimens.Part 1:Turned,ground,milled,shaped and planed
CSN 40 4012-1971 Measurement of ionizing radiation and particle emission of radionuclides. Relative activity measurement with internal proporlional counters.

ES-UNE, Specific curl plus or minus

UNE-EN 3227:2010 Aerospace series - Nuts, hexagonal, plain, normal height, normal across flats, in steel, cadmium plated, left hand thread - Classification: 1 100 MPa (at ambient temperature) / 235 °C (Endorsed by AENOR in April of 2010.)
UNE-EN ISO 18314-2:2023 Analytical colorimetry - Part 2: Saunderson correction, solutions of the Kubelka-Munk equation, tinting strength, depth of shade, hiding power (ISO 18314-2:2023)
UNE-EN 3229:2009 Aerospace series - Nuts, hexagonal, plain, reduced height, normal across flats, in steel, cadmium plated, left hand thread - Classification: 900 MPa (at ambient temperature) / 235 °C (Endorsed by AENOR in January of 2010.)

Korean Agency for Technology and Standards (KATS), Specific curl plus or minus

KS B ISO 6336-3-2015(2020) Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength
KS K ISO 16322-1:2019 Textiles — Determination of spirality after laundering — Part 1: Percentage of wale spirality change in knitted garments
KS C IEC 60034-29:2014 Rotating electrical machines — Part 29: Equivalent loading and superposition techniques — Indirect testing to determine temperature rise

未注明发布机构, Specific curl plus or minus

BS ISO 6336-3:2019(2020) Calculation of load capacity of spur and helical gears Part 3 : Calculation of tooth bending strength

KR-KS, Specific curl plus or minus

KS K ISO 16322-1-2019 Textiles — Determination of spirality after laundering — Part 1: Percentage of wale spirality change in knitted garments

American Society for Testing and Materials (ASTM), Specific curl plus or minus

ASTM E2716-09(2014) Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry

Danish Standards Foundation, Specific curl plus or minus

DS/ISO 13779-3:2021 Implants for surgery – Hydroxyapatite – Part 3: Chemical analysis and characterization of crystallinity ratio and phase purity – AMENDMENT 1

The American Road & Transportation Builders Association, Specific curl plus or minus

AASHTO T 316-2002 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer HM-22; Part IIB; Formaly AASHTO TP 4

AASHTO - American Association of State Highway and Transportation Officials, Specific curl plus or minus

T 316-2002 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer (HM-22; Part IIB; Formaly AASHTO TP 4)

ESDU - Engineering Sciences Data Unit, Specific curl plus or minus

ESDU 83017 A-1992 The wave drag coefficient of spherically blunted secant ogive forebodies of fineness ratio 1.0@ 1.5@ and 2.0 at zero incidence in transonic flow.
ESDU 83018 A-1992 Axial pressure coefficient distributions for spherically blunted secant ogive forebodies of fineness ratio 1.0@ 1.5 and 2.0 at zero incidence in transonic flow.

Lithuanian Standards Office , Specific curl plus or minus

LST EN ISO 179-2:2000/A1:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test - Amendment 1: Precision data (ISO 179-2:1997/Amd.1:2011)

AENOR, Specific curl plus or minus

UNE-EN ISO 179-2:2000/A1:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test - Amendment 1: Precision data (ISO 179-2:1997/Amd 1:2011)

BE-NBN, Specific curl plus or minus

NBN-EN 2790-1993 Aerospace series. Rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank with engagement: 1,5 x thread phi. Dimensions and loads