ZH
RU
ES
illegal scanner
illegal scanner, Total:310 items.
In the international standard classification, illegal scanner involves: Linear and angular measurements, Analytical chemistry, Laboratory medicine, Thermodynamics and temperature measurements, Photography, Medical equipment, IT terminal and other peripheral equipment, Testing of metals, Optics and optical measurements, Vocabularies, Dentistry, Applications of information technology, Optoelectronics. Laser equipment, Textile fibres, Non-destructive testing, Acoustics and acoustic measurements, Graphic technology, Semiconducting materials, Footwear, Audio, video and audiovisual engineering, Electrical and electronic testing, Iron and steel products, Measurement of volume, mass, density, viscosity, Protection against crime, Physics. Chemistry, Optical equipment, Information technology (IT) in general, Glass, Ergonomics, Aerospace electric equipment and systems, Plastics, Materials for aerospace construction, Petroleum products in general, Education, Information sciences. Publishing, Character sets and information coding, Rubber, Non-ferrous metals, Surface treatment and coating, Metrology and measurement in general, Air quality, Document imaging applications, Wastes, Radiation protection, Products of the textile industry, Products of the chemical industry, Rubber and plastics products, Electronic display devices, Mechanical testing, Computer graphics, Interface and interconnection equipment, Lubricants, industrial oils and related products, Shipbuilding and marine structures in general.
British Standards Institution (BSI), illegal scanner
- BS EN ISO 25178-604:2013 Geometrical product specifications (GPS). Surface texture: Areal. Nominal characteristics of non-contact (coherence scanning interferometry) instruments
- BS ISO 16067-2:2004 Photography. Electronic scanners for photographic images. Spatial resolution measurements. Film scanners
- BS ISO 16067-1:2003 Photography. Spatial resolution measurements for electronic scanners for photographic images. Scanners for reflective media
- BS ISO 23159:2020 Non-destructive testing. Gamma ray scanning method on process columns
- BS PD IEC/TS 62791:2015 Ultrasonics. Pulse-echo scanners. Low-echo sphere phantoms and method for performance testing of gray-scale medical ultrasound scanners applicable to a broad range of transducer types
- BS ISO 12641-1:2016 Graphic technology. Prepress digital data exchange. Colour targets for input scanner calibration. Colour targets for input scanner calibration
- BS EN ISO 15708-4:2019 Non-destructive testing. Radiation methods for computed tomography. Qualification
- BS EN ISO 15708-1:2019 Non-destructive testing. Radiation methods for computed tomography. Terminology
- PD IEC TS 62791:2022 Tracked Changes. Ultrasonics. Pulse-echo scanners. Low-echo sphere phantoms and method for performance testing of grey-scale medical ultrasound scanners applicable to a broad range of transducer types
- BS ISO 21550:2004 Photography - Electronic scanners for photographic images - Dynamic range measurements
- BS EN ISO 15708-3:2019 Non-destructive testing. Radiation methods for computed tomography. Operation and interpretation
- BS EN 3475-414:2005 Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
- BS EN 3475-414:2006 Aerospace series. Cables, electrical, aircraft use. Test methods. Differential scanning calorimeter (DSC test)
- 22/30447051 DC BS ISO 12641-1. Graphic technology. Prepress digital data exchange. Colour targets for input scanner calibration - Part 1. Colour targets for input scanner calibration
- DD ENV 12646-1997 Bar coding. Test specifications for bar code scanners and decoders
- 20/30372386 DC BS ISO/IEC 17991. Information technology. Office equipment. Method for measuring scanning productivity of digital scanning devices
- BS EN ISO 15708-2:2019 Non-destructive testing. Radiation methods for Computed tomography. Principles, equipment and samples
- BS ISO 17123-9:2018 Optics and optical instruments. Field procedures for testing geodetic and surveying instruments - Terrestrial laser scanners
- BS EN 6041:2018 Aerospace series. Non-metallic materials. Test method. Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
- BS EN ISO 11357-1:2016 Plastics. Differential scanning calorimetry (DSC). General principles
- BS EN ISO 11357-1:1997 Plastics - Differential scanning calorimetry (DSC) - General principles
- BS EN ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - General principles
- 22/30437783 DC BS EN IEC 63391. General technical requirements for millimeter wave holographic imaging body scanner
- PD IEC/TR 61948-3:2018 Tracked Changes. Nuclear medicine instrumentation. Routine tests. Positron emission tomographs
- BS ISO 23976:2021 Plastics. Fast differential scanning calorimetry (FSC). Chip calorimetry
- BS EN 61966-8:2001 Multimedia systems and equipment. Colour measurement and management. Multimedia colour scanners
- BS ISO 11698-1:2001 Micrographics - Methods of measuring image quality produced by aperture card scanners - Characteristics of the test images
- BS ISO 11698-1:2000 Micrographics. Methods of measuring image quality produced by aperture card scanners - Characteristics of the test images
- BS ISO 11698-2:2000 Micrographics. Methods of measuring image quality produced by aperture card scanners - Quality criteria and control
- BS IEC 62945:2018 Radiation protection instrumentation. Measuring the imaging performance of X-ray computed tomography (CT) security-screening systems
- BS IEC 62963:2020 Radiation protection instrumentation. X-ray computed tomography (CT) inspection systems of bottled/canned liquids
- BS ISO 15708-1:2017 Non-destructive testing. Radiation methods for computed tomography. Terminology
- BS ISO 15708-4:2017 Non-destructive testing. Radiation methods for computed tomography. Qualification
- BS EN ISO 11357-4:2013 Plastics - Differential scanning calorimetry (DSC) - Determination of specific heat capacity
- BS EN ISO 11357-4:2014 Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
- BS EN ISO 11357-4:2021 Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
- BS ISO 12641:1997 Graphic technology - Prepress digital data exchange - Colour targets for input scanner calibration
- BS ISO 12641:1998 Graphic technology. Prepress digital data exchange. Colour targets for input scanner calibration
- BS ISO 17972-2:2016 Graphic technology. Colour data exchange format (CxF/X). Scanner target data (CxF/X-2)
- BS ISO 11698-2:2001 Micrographics - Methods of measuring image quality produced by aperture card scanners - Quality criteria and control
- 20/30396016 DC BS ISO 23976. Plastics. Fast differential scanning calorimetry. Chip calorimetry
- BS EN ISO 11357-7:2015 Plastics. Differential scanning calorimetry (DSC). Determination of crystallization kinetics
- BS EN ISO 11357-7:2013 Plastics. Differential scanning calorimetry (DSC). Determination of crystallization kinetics
- BS EN 16016-1:2011 Non destructive testing. Radiation methods. Computed tomography. Terminology
- BS EN 16016-4:2011 Non destructive testing. Radiation methods. Computed tomography. Qualification
Association Francaise de Normalisation, illegal scanner
- NF E05-031-604*NF EN ISO 25178-604:2013 Geometrical product specification (GPS) - Surface texture : areal - Part 604 : nominal characteristics of non-contact (coherence scanning interferometry) instruments
- NF S12-130*NF ISO 16971:2015 Ophthalmic instruments - Optical coherence tomograph for the posterior segment of the human eye
- NF ISO 16971:2015 Instruments ophtalmiques - Tomographe de cohérence optique du segment postérieur de l'oeil humain
- NF L17-041*NF EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
- NF T46-050:2013 Rubber - Differential scanning calorimetry (DSC) - General principles
- NF T46-050:2015 Rubber - Differential scanning calorimetry (DSC) - General principles
- NF T70-368:2012 Determination of physical characteristics by DSC.
- NF T51-507-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1 : general principles.
- NF T51-507-1*NF EN ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1 : general principles
- NF EN ISO 25178-604:2013 Spécification géométrique des produits (GPS) - État de surface : surfacique - Partie 604 : caractéristiques nominales des instruments sans contact (à interférométrie par balayage à cohérence)
Group Standards of the People's Republic of China, illegal scanner
工业和信息化部/国家能源局, illegal scanner
Professional Standard - Medicine, illegal scanner
工业和信息化部, illegal scanner
- JB/T 13390-2018 Infrared scanning thermometer
- SJ/T 11601-2016 General specifications for information technology non-contact QR code scanners
- SJ/T 11602-2016 General specifications for information technology non-contact one-dimensional code scanners
Korean Agency for Technology and Standards (KATS), illegal scanner
- KS A ISO 16067-2-2005(2020) Photography－Electronic scanners for photographic images－Spatial resolution measurement－Part 2：Film scanners
- KS C 1216-2001(2011) Manual scanning B－mode ultrasonic diagnostic equipment
- KS A ISO 16067-2:2005 Photography-Electronic scanners for photographic images-Spatial resolution measurement-Part 2:Film scanners
- KS A ISO 16067-1:2005 Photography-Spatial resolution measurements of electronic scanners for photographic image-Part 1:Scanners for reflective media
- KS A ISO 16067-1-2005(2020) Photography－Spatial resolution measurements of electronic scanners for photographic image－Part 1：Scanners for reflective media
- KS P ISO 16971:2020 Ophthalmic instruments — Optical coherence tomograph for the posterior segment of the human eye
- KS C IEC TR 61948-3:2020 Nuclear medicine instrumentation — Routine tests —Part 3: Positron emission tomographs
- KS C IEC TR 61948-3:2017 Nuclear medicine instrumentation ─ Routine tests ─ Part 3: Positron emission tomographs
- KS A ISO 21550-2005(2020) Photography－Electronic scanners for photographic images－Dynamic range measurements
- KS B ISO 15708-1:2018 Non-destructive testing — Radiation methods for computed tomography — Part 1: Terminology
- KS M ISO 11357-4:2012 Plastics-Differential scanning calorimetry(DSC)-Part 4:Determination of specific heat capacity
- KS M ISO 11357-4:2016 Plastics－Differential scanning calorimetry(DSC)－Part 4：Determination of specific heat capacity
- KS I 0051-1999 General rules for scanning electron microscopy
- KS D 2714-2016(2021) Scanning probe microscope－Method for lateral force microscope
- KS X ISO/IEC 14473-2007(2013) Information technology－Office equipment－Minimum information to be specified for image scanners
- KS D 2714-2016 Scanning probe microscope－Method for lateral force microscope
- KS B ISO 15708-2:2018 Non-destructive testing —Radiation methods for computed tomography — Part 2: Principles, equipment and samples
- KS B ISO 23159:2022 Non-destructive testing — Gamma ray scanning method on process columns
- KS M ISO 4593-2002(2022) Plastics－Film and sheeting－Determination of thickness by mechanical scanning
- KS M ISO 11357-1-2016(2021) Plastics－Differential scanning calorimetry(DSC)－Part 1：General principles
- KS X ISO 12641-2006(2021) Graphic technology－Prepress digital data exchange-Colour targets for input scanner calibration
- KS X ISO 12641-2006(2016) Graphic technology－Prepress digital data exchange-Colour targets for input scanner calibration
- KS X ISO 11698-1-2002(2012) Micrographics－Methods of measuring image quality produced by aperture card scanners－Part 1：Characteristics of the test images
- KS X ISO 11698-2-2007(2012) Micrographics－Methods of measuring image quality produced by aperture card scanners－Part 2：Quality criteria and control
- KS C 2132-1996 Testing method for oxidative-induction time of polyolefins by differential scanning calorimetry
- KS D 2714-2006 Scanning probe microscope-Method for lateral force microscope
- KS M ISO 4593-2002(2017) Plastics－Film and sheeting－Determination of thickness by mechanical scanning
Professional Standard - Energy, illegal scanner
International Organization for Standardization (ISO), illegal scanner
- ISO/CD 16971-1 Ophthalmic instruments — Optical coherence tomographs — Part 1: Optical coherence tomographs for the posterior segment of the human eye
- ISO/DIS 16971-1:2011 Ophthalmic instruments — Optical coherence tomographs — Part 1: Optical coherence tomographs for the posterior segment of the human eye
- ISO 16067-2:2004 Photography - Electronic scanners for photographic images - Spatial resolution measurements - Part 2: Film scanners
- ISO 16067-1:2003 Photography - Spatial resolution measurements of electronic scanners for photographic images - Part 1: Scanners for reflective media
- ISO 12641-1:2016 Graphic technology - Prepress digital data exchange - Colour targets for input scanner calibration - Part 1: Colour targets for input scanner calibration
- ISO/DIS 12641-1 Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration — Part 1: Colour targets for input scanner calibration
- ISO/IEC 17991:2021 Information technology -- Office equipment -- Method for measuring scanning productivity of digital scanning devices
- ISO/DIS 17097:2023 3-D human body scan data — Part 1: Terminologies and methodologies for processing of human scan data
- ISO 25178-604:2013 Geometrical product specifications (GPS).Surface texture: Areal.Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
- ISO/CD 17097 3-D digital human body scan data — Part 1: Terminologies and methodologies for processing of human scan data
- ISO/CD 25178-604 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
- ISO 17123-9:2018 Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 9: Terrestrial laser scanners
- ISO 23976:2021 Plastics - Fast differential scanning calorimetry (FSC) - Chip calorimetry
- ISO 23159:2020 Non-destructive testing — Gamma ray scanning method on process columns
- ISO 7111:1987 Plastics; Thermogravimetry of polymers; Temperature scanning method
- ISO/DIS 25178-604:2023 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Design and characteristics of non-contact (coherence scanning interferometry) instruments
- ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
- ISO 11357-1:2016 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles
- ISO 22493:2008 Microbeam analysis - Scanning electron microscopy - Vocabulary
- ISO 11357-1:2023 Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, illegal scanner
- GB/T 18788-2002 General specification for flatbed scanners
- GB/T 18788-2008 General specification for flatbed scanner
- GB/T 28166-2011 General specification for sheetfed scanner
- GB/T 32280-2015 Test method for warp of silicon wafers.Automated non-contact scanning method
- GB/T 30834-2014 Standard test methods for rating and classifying inclusions in steel.Scanning electron microscope
- GB/T 30834-2022 Rating and classifying of inclusions in steel—Scanning electron microscope method
- GB/T 25885-2010 Measurement of the mean and distribution of fibre diameter for wool.Laserscan fiber diameter analyser
- GB/T 25189-2010 Microbeam analysis.Determination method for quantitative analysis parameters of SEM-EDS
- GB/T 36557-2018 General technical requirements of image element scanning instant machine-readable device
- GB/T 29507-2013 Test method for measuring flatness,thickness and total thickness variation on silicon wafers.Automated non-contact scanning
- GB/T 30020-2013 Test method for the defects of glass.Photoelastic scanning method
- GB/T 30020-2023 Glass defect detection method photoelastic scanning method
- GB/T 33523.604-2022 Geometrical product specifications (GPS)—Surface texture: Areal—Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
- GB/T 16594-1996 Micron grade lenght measurement by SEM
- GB/T 31563-2015 Metallic coatings.Measurement of coating thickness.Scanning electron microscope method
- GB/T 17722-1999 Gold-plated thickness measurement by SEM
- GB/T 29190-2012 Measurement methods of drift rate of scanning probe microscope
- GB/T 23698-2023 General requirements for 3D scanning anthropometric methods
- GB/T 23698-2009 General requirements for 3-D scanning anthropometric methodologies
- GB/T 17361-2013 Microbeam analysis.Identification of authigenic clay mineral in sedimentary rock menthod by scanning electron microscope and energy dispersive spectrometer
- GB/T 16594-2008 General rules for measurement of length in micron scale by SEM
- GB/T 20307-2006 General rules for nanometer-scale length measurement by SEM
- GB/T 19466.1-2004 Plastics-Differential scanning calorimetry(DSC)-Part 1:General principles
U.S. Military Regulations and Norms, illegal scanner
- ARMY MIL-S-49166/4-1982 SCANNER, MECHANICAL MX-9872(V)4/UA
- ARMY MIL-S-49166/5 VALID NOTICE 1-1989 SCANNER, MECHANICAL MX-9872(V)5/UA
- ARMY MIL-S-49166/5-1982 SCANNER, MECHANICAL MX-9872(V)5/UA
- ARMY MIL-S-49166/6 (1)-1984 SCANNER, MECHANICAL MX9872(V)6/UA
- ARMY MIL-S-49166/6-1982 SCANNER, MECHANICAL MX9872(V)6/UA
- ARMY MIL-S-49166/7-1988 SCANNER, MECHANICAL MX-9872(V)7/UA
- ARMY MIL-PRF-49166/2 A VALID NOTICE 1-2013 Mechanical Scanner, MX-9872(V)2/UA
- ARMY MIL-PRF-49166/1 B VALID NOTICE 1-2013 Mechanical Scanner, MX-9872(V)1/UA
- ARMY MIL-PRF-49166/2A-1999 MECHANICAL SCANNER, MX-9872(V)2/UA
- ARMY MIL-PRF-49166/3A-1999 MECHANICAL SCANNER, MX-9872(V)3/UA
- ARMY MIL-S-49166/6 VALID NOTICE 2-2013 Scanner, Mechanical MX-9872(V)6/UA
- ARMY MIL-S-49166/4 VALID NOTICE 3-2013 Scanner, Mechanical MX-9872(V)4/UA
- ARMY MIL-S-49166/7 VALID NOTICE 2-2013 Scanner, Mechanical, MX-9872(V)7/UA
Professional Standard - Machinery, illegal scanner
National Metrological Technical Specifications of the People's Republic of China, illegal scanner
- JJF 1406-2013 Calibration Specification for Terrestrial Laser Scanners
- JJF 1712-2018 Calibration Specification for Thin Layer Chromatography Scanners
- JJF 1950-2021 Calibration Specification for Thread Gauge Scanners
- JJF 1719-2018 Calibration Specification for 3D Laser Scanner for Volume Measurements of Rail Tankers and Tank Containers
Professional Standard - Military and Civilian Products, illegal scanner
- WJ 2290-1995 Verification Regulations for Differential Scanning Calorimeter
- WJ 2299-1995 Inductively Coupled Plasma Sequential Scanning Spectrometer Verification Regulations
- WJ/T 9054-2006 Test method for thermal stability of industrial explosives: differential scanning calorimetry
Professional Standard - Electron, illegal scanner
Alliance of Telecommunications Industry Solutions （ATIS), illegal scanner
- ATIS 0300102-2011 Scanner Testing Results per ATIS-0300085, BCSC Test Specification for Product Label Scanning
ATIS - Alliance for Telecommunications Industry Solutions, illegal scanner
- 0300102-2011 Scanner Testing Results per ATIS-0300085@ BCSC Test Specification for Product Label Scanning
National Metrological Verification Regulations of the People's Republic of China, illegal scanner
RO-ASRO, illegal scanner
- STAS 6523-1989 lLLUSTRATION ORIGINAL COP IES FOl? P0I.YGRAPH1C REPRODUC- T ION
Professional Standard - Environmental Protection, illegal scanner
- HJ 2517-2012 Technical requirement for environmental labeling products.Scanner
国家市场监督管理总局、中国国家标准化管理委员会, illegal scanner
- GB/T 39111-2020 Technical requirements for dental model 3D scanner
- GB/T 40826-2021 Test method for hand-arranging staple length of dehaired cashmere—Flatbed scanner method
- GB/T 32280-2022 Test method for warp and bow of silicon wafers—Automated non-contact scanning method
- GB/T 39867-2021 Bismuth germanate scintillation crystal for positron emission tomography
- GB/T 40271-2021 Test method for identification of textile fibers—Differential scanning calorimetry（DSC）
German Institute for Standardization, illegal scanner
- DIN EN ISO 25178-605:2014 Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014); German version EN ISO 25178-605:2014
- DIN EN 6041:2018-03 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC); German and English version EN 6041:2018
- DIN EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC); German and English version EN 6041:2018
- DIN 6855-4:2016-11 Constancy testing of nuclear medicine instruments - Part 4: Positron emission tomographs (PET)
- DIN 66223-5:1985 Fonts for optical character recognition; format for handheld scanner
- DIN 51007-2:2021 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
- DIN 51007-2:2021-10 Thermal analysis - Differential thermal analysis (DTA) and Differential scanning calorimetry (DSC) - Part 2: Fast differential scanning calorimetry (f-DSC); Chip calorimetry
- DIN 44030-2:1992 Control technology; light barriers and light scanners; method of measurement
- DIN EN ISO 25178-604:2013-12 Geometrical product specification (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013); German version EN ISO 25178-604:2013
- DIN EN 16016-4:2012 Non destructive testing - Radiation methods - Computed tomography - Part 4: Qualification; German version EN 16016-4:2011
- DIN EN 6064:2018-03 Aerospace series - Analysis of non-metallic materials (cured) for the determination of the extent of cure by Differential Scanning Calorimetry (DSC); German and English version EN 6064:2017
KR-KS, illegal scanner
- KS P ISO 16971-2020 Ophthalmic instruments — Optical coherence tomograph for the posterior segment of the human eye
- KS C IEC TR 61948-3-2020 Nuclear medicine instrumentation — Routine tests —Part 3: Positron emission tomographs
- KS B ISO 15708-1-2018 Non-destructive testing — Radiation methods for computed tomography — Part 1: Terminology
- KS B ISO 15708-2-2018 Non-destructive testing —Radiation methods for computed tomography — Part 2: Principles, equipment and samples
- KS M ISO 11357-1-2016 Plastics－Differential scanning calorimetry(DSC)－Part 1：General principles
- KS B ISO 23159-2022 Non-destructive testing — Gamma ray scanning method on process columns
NEMA - National Electrical Manufacturers Association, illegal scanner
- NEMA NU 2-1994 Performance Measurements of Position Emission Tomographs
- NEMA NU 2-2012 Performance Measurements of Positron Emission Tomographs
- NEMA NU 2-2018 Performance Measurements of Positron Emission Tomographs (PET)
Hubei Provincial Standard of the People's Republic of China, illegal scanner
American Society for Testing and Materials (ASTM), illegal scanner
- ASTM E1683-02(2014)e1 Standard Practice for Testing the Performance of Scanning Raman Spectrometers
- ASTM E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-97 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E2069-06(2018) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
- ASTM E2069-19 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
- ASTM E967-08(2014) Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E2382-04(2020) Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy
- ASTM F1390-97 Standard Test Method for Measuring Warp on Silicon Wafers by Automated Noncontact Scanning
- ASTM E2041-03 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
- ASTM E2041-99 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
- ASTM E2041-01 Standard Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
- ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM E2253-08 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM E126-92(1998) Standard Test Method for Inspection and Verification of Hydrometers
- ASTM E1269-01 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM E1269-99 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM E2253-21 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters
- ASTM E1683-02(2007) Standard Practice for Testing the Performance of Scanning Raman Spectrometers
- ASTM E1683-02 Standard Practice for Testing the Performance of Scanning Raman Spectrometers
- ASTM E1683-95A Standard Practice for Testing the Performance of Scanning Raman Spectrometers
- ASTM E1683-02(2022) Standard Practice for Testing the Performance of Scanning Raman Spectrometers
- ASTM E2603-15 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
- ASTM E967-03 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E967-08 Standard Practice for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- ASTM E968-02(2014) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters
- ASTM E2041-13e1 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
- ASTM E2603-08 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
- ASTM C1718-10(2019) Standard Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning
- ASTM D6810-22 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
- ASTM E928-03 Standard Test Method for Determination of Purity by Differential Scanning Calorimetry
- ASTM E928-08(2014) Standard Test Method for Purity by Differential Scanning Calorimetry
- ASTM D6810-21 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry
Inner Mongolia Provincial Standard of the People's Republic of China, illegal scanner
- DB15/T 981-2016 Carded cashmere hand row length test method drawing board electronic scanner method
- DB15/T 1341-2018 Specification for calibration of electronic scanner for carded cashmere hand row length chart
- DB15/T 883-2015 Mean fiber diameter and fiber diameter distribution determination method Sirolan (sirolan) - laser scanning fiber diameter analyzer method
CZ-CSN, illegal scanner
- CSN 36 7522-1986 Colour television slide scanners Technical requirements and measuring methods
International Electrotechnical Commission (IEC), illegal scanner
- IEC TS 62791:2015 Ultrasonics - Pulse-echo scanners - Low-echo sphere phantoms and method for performance testing of gray-scale medical ultrasound scanners applicable to a broad range of transducer types
- IEC TS 62791:2022 Ultrasonics - Pulse-echo scanners - Low-echo sphere phantoms and method for performance testing of grey-scale medical ultrasound scanners applicable to a broad range of transducer types
- IEC 87/542/CD:2013 IEC/TS 62791: Ultrasonics - Pulse-echo scanners - Low-echo sphere phantoms and methods for performance testing of gray-scale medical ultrasound scanners applicable to a broad range of transducer types
IEC - International Electrotechnical Commission, illegal scanner
- TS 62791-2015 Ultrasonics - Pulse-echo scanners - Low-echo sphere phantoms and method for performance testing of gray-scale medical ultrasound scanners applicable to a broad range of transducer types (Edition 1.0)
RU-GOST R, illegal scanner
- GOST R 57631-2017 Ultrasonics. Pulse-echo scanners. Low-echo sphere phantoms and method for performance testing of gray-scale medical ultrasound scanners applicable to a broad range of transducer types
- GOST R 59731-2021 Medical electrical equipment. Magnetic resonance tomographs. Technical condition control methods
- GOST R 8.794-2012 State system for ensuring the uniformity of measurements. Ground laser scanners. Verification procedure
Fujian Provincial Standard of the People's Republic of China, illegal scanner
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, illegal scanner
- GB/T 33805-2017 Technical requirement of laser confocal biochip scanner
- GB/T 33806-2017 Technical requirement of area fluorescent imaging microarray scanner
- GB/T 33834-2017 Microbeam analysis—Scanning electron microscopy—Scanning electron microscope analysis of biological specimens
- GB/T 33095.1-2016 Rubber, unvulcanized—Measurement of rheological properties using rotorless shear rheometer— Part 1: Frequency sweep
未注明发布机构, illegal scanner
- BS ISO 12641-1:2016(2020) Graphic technology — Prepress digital data exchange — Colour targets for input scanner calibration Part 1 : Colour targets for input scanner calibration
- GOST R 58396-2019 Medical mask. Drive and method of scanning
Taiwan Provincial Standard of the People's Republic of China, illegal scanner
- CNS 12007-1987 Method of Test for Helical Scanning Video Tape Recorders
European Association of Aerospace Industries, illegal scanner
- AECMA PREN 6064-1995 Aerospace Series Non-Metallic Materials Analysis of Non-Metallic Materials (Cured) for the Determination of the Extent of Cure by Differential Scanning Calorimetry (DSC) Edition P1
- AECMA PREN 6041-1995 Aerospace Series Non-Metallic Materials Test Method Analysis of Non-Metallic Materials (Uncured) by Differential Scanning Calorimetry (DSC) Edition P1
Danish Standards Foundation, illegal scanner
- DS/IEC/TR 61948-3:2006 Nuclear medicine instrumentation - Routine tests - Part 3: Positron emission tomographs
- DS/ISO/IEC 14473:1999 Information technology - Office equipment - Minimum information to be specified for image scanners
- DS/EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
- DS/EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
Indonesia Standards, illegal scanner
American National Standards Institute （ANSI), illegal scanner
- ANSI IT8.7/2-1993 Graphic Technology – Color Reflection Target for Input Scanner Calibration
- ANSI IT8.7/1-1993 Graphic Technology – Color Transmission Target for Input Scanner Calibration
- ANSI/ASTM D4591:2001 Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
European Committee for Standardization (CEN), illegal scanner
- EN 16016-4:2011 Non destructive testing - Radiation methods - Computed tomography - Part 4: Qualification
- EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
- EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
- EN 16016-3:2011 Non destructive testing - Radiation methods - Computed Tomography - Part 3: Operation and interpretation
- EN 16016-2:2011 Non destructive testing - Radiation methods - Computed tomography - Part 2: Principle, equipment and samples
- EN 3475-414:2005 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
- EN 16016-1:2011 Non destructive testing - Radiation methods - Computed tomography - Part 1: Terminology
- EN ISO 11357-1:2023 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2023)
- EN ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2009)
National Electrical Manufacturers Association（NEMA), illegal scanner
- NEMA NU 2-2001 Performance Measurements of Position Emission Tomographs Replaces NU 1:1994
ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, illegal scanner
- PREN 6041-1995 Aerospace Series Non-Metallic Materials Test Method Analysis of Non-Metallic Materials (Uncured) by Differential Scanning Calorimetry (DSC) (Edition P1)
ANSI - American National Standards Institute, illegal scanner
Professional Standard - Education, illegal scanner
- JY/T 0582-2020 General Rules for Scanning Probe Microscopy Analytical Methods
- JY/T 0584-2020 General Rules for Analytical Methods of Scanning Electron Microscopy
- JY/T 010-1996 General principles of analytical scanning electron microscopy
- JY/T 0589.3-2020 General Principles of Thermal Analysis Methods Part 3: Differential Scanning Calorimetry
- JY/T 0586-2020 General Rules for Analytical Methods of Laser Scanning Confocal Microscopy
Professional Standard - Public Safety Standards, illegal scanner
- GA/T 2080-2023 Forensic sciences—Examination methods for plastics—Differential scanning calorimetry(DSC)
- GA/T 1994-2022 Forensic Science Synthetic Fiber Examination Differential Scanning Calorimetry
- GA/T 2077-2023 Forensic sciences—Examination methods for projectiles and soldering tin—Differential scanning calorimetry(DSC)
ES-UNE, illegal scanner
- UNE-EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC) (Endorsed by Asociación Española de Normalización in March of 2018.)
- UNE-EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) (Endorsed by AENOR in January of 2015.)
GB-REG, illegal scanner
IT-UNI, illegal scanner
- UNI ISO 23159:2021 Non-destructive testing -- Gamma ray scanning method on process columns
国家能源局, illegal scanner
ECIA - Electronic Components Industry Association, illegal scanner
- 502-A-1989 Recommended Practice for Measurement of X-Radiation from Non-Raster-Scanned Direct-View Cathode Ray Tubes
PL-PKN, illegal scanner
- PN C89431-1993 Plastics. Thermogravimetry of polymers. Temperature scanning method
Professional Standard - Petrochemical Industry, illegal scanner
- SH/T 0589-1994 Determination of petroleum wax transition temperature (differential scanning calorimetry)
Professional Standard - Petroleum, illegal scanner
- SY/T 5162-2014 Analytical method of rock sample by scanning electron microscope
- SY/T 5162-1997 Analytical method of rock sample by scanning electron microscope
- SY 5162-2014 Scanning Electron Microscopy Analysis Method for Rock Samples
Professional Standard - Commodity Inspection, illegal scanner
- SN/T 4388-2015 Leather identification.Scanning electron microscopy and optical microscopy
- SN/T 1672.2-2005 Rules for the inspection of medical equipment for import and export --Part 2: General spiral computed tomography scanner
- SN/T 3009-2011 Identification of seawater corrosion on metallic surface by SEM
- SN/T 3324.6-2014 Technical requirements for the inspection of information technology equipment for export.Part 6:Energy efficiency for scanner
Shanghai Provincial Standard of the People's Republic of China, illegal scanner
- DB31/T 297-2003 Calibration method of magnification of scanning electron microscope
Professional Standard - Chemical Industry, illegal scanner
- HG/T 3009-1999 Photographic film and film base-determination of thickness by mechanical scanning
Association of German Mechanical Engineers, illegal scanner
- VDI 3866 Blatt 5-2004 Determination of asbestos in technical products - Scanning electron microscopy method
- VDI 3866 Blatt 5-2017 Determination of asbestos in technical products - Scanning electron microscopy method
Professional Standard - Aviation, illegal scanner
- HB 20094.4-2012 Test method for determination of wear metals in operating liquid for aviation.Part 4: Scanning electron microscopy and energy dispersive spectrometry
- HB 20095-2012 Inspection method for composite parts and structures using ultrasonic C-scan
- HB 5460-1990 Ultrasonic penetrating C-scan detection method of honeycomb structure
Military Standard of the People's Republic of China-General Armament Department, illegal scanner
- GJB 737.11-1993 Test methods for pyrotechnic chemicals Particle size determination Scanning electron microscopy
- GJB 5793-2006 Test and evaluation method for vulnerability scanning products
AENOR, illegal scanner
- UNE-ISO 4593:2010 Plastics -- Film and sheeting -- Determination of thickness by mechanical scanning
国家质量监督检验检疫总局, illegal scanner
- SN/T 4704-2016 Isothermal detection of kinetic parameters Differential scanning calorimetry
Association for Information and Image Management (AIIM), illegal scanner
- AIIM MS58-1996 Standard Recommended Practice for Implementation of Small Computer Systems Interface (SCSI-2), (X3.131-1994) for Scanners
Professional Standard - Building Materials, illegal scanner
- JC/T 2658-2022 Laser scanning method for measuring three-dimensional shape deviation of curved glass
Lithuanian Standards Office , illegal scanner
- LST EN 3475-414-2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 414: Differential scanning calorimeter (DSC test)
Japanese Industrial Standards Committee (JISC), illegal scanner
- JIS X 9202:1999 Graphic technology -- Prepress digital data exchange -- Colour target for input scanner calibration
Guangdong Provincial Standard of the People's Republic of China, illegal scanner
- DB44/T 1527-2015 Microbeam Analysis Scanning Electron Microscope Image Clarity Evaluation Method
Professional Standard - Judicatory, illegal scanner