ZH
RU
ES

Metal Nitrogen Density

Metal Nitrogen Density, Total:500 items.

In the international standard classification, Metal Nitrogen Density involves: Ferroalloys, Powder metallurgy, Mechanical testing, Thermodynamics and temperature measurements, Testing of metals, Non-ferrous metals, Surface treatment and coating, Ferrous metals, Materials for aerospace construction, Valves, Rubber, Electrical wires and cables, Document imaging applications, Materials for the reinforcement of composites, Structures of buildings, Textile machinery, Fluid power systems, Heat treatment, Jewellery, Products of the chemical industry, Shipbuilding and marine structures in general, Components for aerospace construction, Particle size analysis. Sieving, Equipment for processing of minerals, Cinematography, Iron and steel products, Equipment for the chemical industry, Seals, glands, Construction materials, Installations in buildings, Cutting tools, Medical equipment, Dentistry, Vacuum technology, Pipeline components and pipelines, Graphic technology, Geology. Meteorology. Hydrology, Cargo equipment, Barrels. Drums. Canisters, Rubber and plastics products, Cans. Tins. Tubes, Insulating materials, Galvanic cells and batteries, Motor cycles and mopeds, Electrical accessories, Adhesives, Measurement of volume, mass, density, viscosity, Organic chemicals, Non-destructive testing, Mechanical structures for electronic equipment, Linear and angular measurements.

RU-GOST R, Metal Nitrogen Density

GOST 16698.13-1993 Metallic manganese and nitrated manganese. Method for determination of nitrogen
GOST 16698.13-1984 Metallic manganese. Method for determination of nitrogen
GOST 25279-1993 Metallic powders. Determination of tap density
GOST 25279-1982 Metal powders. Determination of buik density after shakiny dewn
GOST 13020.7-1985 Metallic chrome. Methods for determination of nitrogen
GOST 22720.4-1977 Rare metals and their alloys. Method for the determination of nitrogen
GOST 21981-1976 Sealants. Determination method of bond strength with metal at peeling
GOST 22720.1-1977 Rare metals and their alloys. Methods for the determination of oxygen, hydrogen, nitrogen and carbon
GOST 22720.0-1977 Rare metals and their alloys. General requirements for the methods of determination of oxygen, hydrogen, nitrogen and carbon
GOST 26999-1986 Metalic manganese and nitrated manganese. Methods of sampling and sample preparation for chemical and physical-chemical analyses
GOST R 53197-2008 Jewellery. Fineness of precious metal alloys

SE-SIS, Metal Nitrogen Density

SIS 11 10 25-1964 Determination of density of metals
SIS SMS 1218-1953
SIS 11 10 30-1975 Metallic powders. Determination of apparent density
SIS SS 11 10 32-1982 Powder metallurgy - Metallic powders - Determination of tap density
SIS SS 11 10 25-1983 Metallic materials - Impermeable material — Determination of density
SIS 11 10 25-1975 Impermeable metal materials. Determination of density
SIS SS 84 57 02-1981 Hermetically sealed metal cans for food
SIS SS-EN 10 179-1989 Chemical analysis of ferrous materials — Determination of nitrogen (trace amounts) in steel — spectrophotometric method
SIS SMS 1217-1953
SIS SS 84 57 50-1979 Hermetically sealed metal food containers — Determination of capacity
SIS SS-ISO 8126:1988 Micrographics — Diazo and vesicular film — Visual density
SIS 11 01 70-1958 Sampling for hardness test of metals
SIS 11 01 70-1976 Sampling for hardness testing of metats
SIS SS 27 11 16-1979 Corrugated metal sheets — Water tightness test of fixings

SAE - SAE International, Metal Nitrogen Density

SAE AMS-T-21014A-2008 Tungsten Base Metal@ High Density
SAE AS4009-1993 Hose Assembly@ Polytetrafluoroethylene@ PTFE@ Metal Braid@ Medium Pressure@ Beam Seal@ 45 Degrees to 45 Degrees
SAE AS4009A-2017 HOSE ASSEMBLY@ POLYTETRAFLUOROETHYLENE@ PTFE@ METAL BRAID@ MEDIUM PRESSURE@ BEAM SEAL@ 45? TO 45?
SAE AMS7325-1957 RINGS@ SEALING@ TUBULAR METAL@ CORROSION RESISTANT STEEL

American Society for Testing and Materials (ASTM), Metal Nitrogen Density

ASTM B923-20 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B923-21 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B923-02(2008) Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B923-10 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B923-22 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B923-16 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B923-02 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
ASTM B777-99 Standard Specification for Tungsten Base, High-Density Metal
ASTM B777-15(2020) Standard Specification for Tungsten Base, High-Density Metal
ASTM B777-07(2013) Standard Specification for Tungsten Base, High-Density Metal
ASTM B777-07 Standard Specification for Tungsten Base, High-Density Metal
ASTM B777-15 Standard Specification for Tungsten Base, High-Density Metal
ASTM F180-94(2010)e1 Standard Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices
ASTM F180-94(2015) Standard Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices
ASTM B212-09 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM B527-23 Standard Test Method for Tap Density of Metal Powders and Compounds
ASTM B527-22 Standard Test Method for Tap Density of Metal Powders and Compounds
ASTM B527-15 Standard Test Method for Tap Density of Metal Powders and Compounds
ASTM F1466-99(2010) Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications
ASTM B527-20 Standard Test Method for Tap Density of Metal Powders and Compounds
ASTM B212-99 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM B212-99(2006) Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
ASTM B312-96(2002) Standard Test Method for Green Strength for Compacted Metal Powder Specimens
ASTM B312-96 Standard Test Method for Green Strength for Compacted Metal Powder Specimens
ASTM B312-09 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
ASTM B417-00(2006)e1 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM B417-00 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
ASTM B527-93(1997) Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
ASTM B527-93(2000)e1 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
ASTM C1785-17 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
ASTM B527-14 Standard Test Method for Determination of Tap Density of Metal Powders and Compounds
ASTM C1785-16 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing
ASTM UOP1025-18 Density of Viscous Liquids and Semi-Solid Hydrocarbons by Nitrogen Displacement
ASTM B527-06 Standard Test Method for Determination of Tap Density of Metallic Powders and Compounds
ASTM F29-97(2002) Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications

Professional Standard - Building Materials, Metal Nitrogen Density

JC/T 2313-2015 Nitrogen leakage test machine for nonmetallic sealing material
JC/T 2053-2011 Nonmetallic sealing packing

American Society of Mechanical Engineers (ASME), Metal Nitrogen Density

ASME B40.3-1997 Bimetallic actuated thermometers
ASME B40.3-1990 Bimetallic actuated thermometers
ASME B16.21-1992 Nonmetallic flat gaskets for pipe flanges

Taiwan Provincial Standard of the People's Republic of China, Metal Nitrogen Density

CNS 9204-1982 Method for Determining Apparent Density of Metal Powders
CNS 9205-1982 Method for Determining Density of Metal Powder Sintered Materials
CNS 13421-1994 Micrographics - Diazo and Vesicular Films - Visual Density - Specifications
CNS 6316-1980 Method of Test for Density of Fine Wire and Ribbon for Electronic Devices

CZ-CSN, Metal Nitrogen Density

CSN 42 2291-1979 Metallic and nitrided manganese
CSN 42 0890 Cast.9-1983 Determination of tap density of metal powders
CSN 42 0890 Cast.10-1982 Testing of metal powders. Determination of metal powder compact density
CSN EN 10 179-1993 Chemical analysis of ferrous metals — Determination of nitrogen (trace amounts) in steels — Spectrophotometric method
CSN ON 49 6051-1967
CSN 02 9401-1971 Motal insert rubbcr seals for rotaling shafts
CSN 34 7010 Cast.05-1972 Thickness measurement of metal sheaths
CSN 03 8153-1980 Corrosion of metals. Metallic and non-metallic inorganic coatings on alloys of iron. Methods for determination of degree of rust penetration through tne coating
CSN 22 2901-1970 Metal cutting cireular saws, compact. Common regulations

RO-ASRO, Metal Nitrogen Density

STAS SR ISO 3953:1993 Metallic powders. Determination of tap density
STAS 12137-1982 Metalic powders determination of tap DENSITY
STAS 8432-1979 METAL POWDERS Determination of apparent density
STAS SR EN 23369-1995 Impermeable sintered metal materials and hardmetals. Determination of density
STAS 5891-1988 METALLIC SEAL IN G CAPS
SR ISO 4498-2:1996 Sintered metal materials, excluding hardmetals. Determination of apparent hardness. Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
STAS SR ISO 2738:1994 Permeable sintered metal materials - Determination of density, oil content, and open porosity
STAS 10703-1986 Testing of metals ROCKWELL HARDNESS TESTING (B, F, G SCALES)
STAS 6759-1987 Length measures METAL FOLDING RULES Hingcd metal metre
STAS 8030-1977 Steel flanges TAPER SEALING SURFACE FOR METALLIC LENTICULAR JOINTS NP64... NP 400 Dimensions
STAS 12100/3-1988 Equipments for wellbead SEALING METALLIC RING GASKETS
STAS SR ISO 5832-9:1996 Implants for surgery - Metailic materials -Part 9: Wrought high nitrogen stainless steel

International Organization for Standardization (ISO), Metal Nitrogen Density

ISO 3953:1993 Metallic powders; determination of tap density
ISO 3369:1975 Impermeable sintered metal materials and hardmetals; Determination of density
ISO 3953:2011 Metallic powders - Determination of tap density
ISO 3953:1985 Metallic powders — Determination of tap density
ISO 3953:1977 Metallic powders — Determination of tap density
ISO 3369:2006 Impermeable sintered metal materials and hardmetals - Determination of density
ISO 2738:1999 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
ISO 3923-1:2008 Metallic powders - Determination of apparent density - Part 1: Funnel method
ISO 3923-1:1979 Metallic powders; Determination of apparent density; Part 1 : Funnel method
ISO 2738:1973 Permeable sintered metal materials — Determination of density and open porosity
ISO 3923-1:2018 Metallic powders - Determination of apparent density - Part 1: Funnel method
ISO 4498-2:1981 Sintered metal materials, excluding hardmetals; Determination of apparent hardness; Part 2 : Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen
ISO 2738:1987 Permeable sintered metal materials; Determination of density, oil content, and open porosity
ISO 9202:2019 Jewellery and precious metals — Fineness of precious metal alloys
ISO 3923-3:1980 Metallic powders — Determination of apparent density — Part 3: Oscillating funnel method
ISO 3923-3:1986 Metallic powders; Determination of apparent density; Part 3 : Oscillating funnel method
ISO 9202:1991 Jewellery; fineness of precious metal alloys
ISO 9202:2014 Jewellery - Fineness of precious metal alloys
ISO 3923-2:1981 Metallic powders; Determination of apparent density; Part 2 : Scott volumeter method
ISO 8126:1986 Micrographics; Diazo and vesicular films; Visual density; Specifications
ISO 18549-1:2009 Metallic powders - Determination of apparent density and flow rate at elevated temperatures - Part 1: Determination of apparent density at elevated temperatures
ISO 1179-4:2007 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
ISO 22764:2020 Jewellery and precious metals — Fineness of solders used with precious metal jewellery alloys
ISO 6106:1979 Abrasive products; Grain sizes of diamond or cubic boron nitride
ISO 23345:2021 Jewellery and precious metals - Non destructive precious metal fineness confirmation by ED-XRF
ISO 8448:1986 Pipework; Double overlap flexible metal hoses (unpacked, limited tightness, circular or polygonal section, in protected carbon steel)
ISO 90:1977 Hermetically sealed metal cans for food and drinks — Specifications

European Committee for Standardization (CEN), Metal Nitrogen Density

EN ISO 3953:2011 Metallic powders - Determination of tap density (ISO 3953:2011)
EN ISO 3953:1995 Metallic Powders - Determination of Tap Density (ISO 3953: 1993)
prEN 23369-1992 Impermeable sintered metal materials and hardmetals; determination of density (ISO 3369:1975)
EN ISO 3923-1:2018 Metallic powders - Determination of apparent density - Part 1: Funnel method
EN ISO 2738:1999 Sintered Metal Materials, Excluding Hardmetals - Permeable Sintered Metal Materials - Determination of Density, Oil Content and Open Porosity ISO 2738: 1999
EN 10179:1989 Chemical Analysis of Ferrous Materials - Determination of Nitrogen (Trace Mounts) in Steel Spectrophotometric Method
EN 23369:1993 Impermeable Sintered Metal Materials and Hardmetals - Determination of Density (ISO 3369: 1975)
prEN 23923-1-1992 Metallic powders; determination of apparent density; part 1: funnel method (ISO 3923-1:1979)
EN 1507:2006 Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage
EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006)
EN 23953:1993 Metallic Powders - Determination of Tap Density (ISO 3953: 1985) (Superseded by EN ISO 3953: 1995)
EN 6018:2017 Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
EN ISO 1179-4:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007)
EN 23923-1:1993 Metallic Powders - Determination of Apparent Density - Part 1: Funnel Method (ISO 3923-1: 1979)
EN 29202:1992 Jewellery - Fineness of Precious Metal Alloys (ISO 9202 : 1991)
EN ISO 9974-3:2000 Connections for General Use and Fluid Power - Ports and Stud Ends with ISO 261 Threads with Elastomeric or Metal-To-Metal Sealing - Part 3: Stud Ends with Metal-To-Metal Sealing (Type B) ISO 9974-3:1996
EN ISO 3923-1:2010 Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2008)

Japanese Industrial Standards Committee (JISC), Metal Nitrogen Density

JIS Z 2512:2012 Metallic powders -- Determination of tap density
JIS Z 2512:2006 Metallic powders -- Determination of tap density
JIS Z 2504:2012 Metallic powders -- Determination of apparent density
JIS Z 2504:1979 Method for determination of apparent density of metal powders
JIS Z 2505:1989 Method for determination of density of metal powder sintered materials
JIS Z 2504:2000 Metallic powders -- Determination of apparent density -- Funnel method
JIS B 4130:1998 Diamond/CBN products -- Grain sizes of diamond or cubic boron nitride
JIS T 6118:1995 Dental casting precious alloys for metal ceramics
JIS Z 2501:2000 Sintered metal materials -- Determination of density, oil content, and open porosity
JIS B 7542:1979 Bimetallic thermometers
JIS Z 1571:1995 Hermetically sealed metal cans for food and drink
JIS Z 1571:2005 Hermetically sealed metal cans for food and drink
JIS B 4130:1982 Grain sizes of diamond or cubic boron nitride
JIS H 6309:1999 Jewellery -- Fineness of precious metal alloys

British Standards Institution (BSI), Metal Nitrogen Density

BS EN ISO 3953:2011 Metallic powders. Determination of tap density
BS EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density
BS EN ISO 3923-1:2010 Metallic powders - Determination of apparent density - Funnel method
BS EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
BS EN ISO 3923-1:2018 Tracked Changes. Metallic powders. Determination of apparent density. Funnel method
BS EN 23923-2:1993 Metallic powders. Determination of apparent density. Scott volumeter method
BS ISO 18549-1:2009 Metallic powders - Determination of apparent density and flow rate at elevated temperatures - Determination of apparent density at elevated temperatures
BS ISO 5832-9:2007 Implants for surgery - Metallic materials - Wrought high nitrogen stainless steel
BS EN ISO 1179-4:2009 Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing. Stud ends for general use only with metal-to-metal sealing (type B)
BS EN ISO 1179-4:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Stud ends for general use only with metal-to-metal sealing (type B)
BS 6499:1998 Metal screw necks, screw caps and inner seals for metal containers - Specification
BS EN 6018:2017 Aerospace series. Test methods for metallic materials. Determination of density according to displacement method
BS 5851:1980 Specification for grain sizes of diamond or cubic boron nitride
BS EN ISO 9202:2016 Jewellery. Fineness of precious metal alloys
BS EN 29202:1993 Jewellery - Fineness of precious metal alloys
BS EN ISO 9202:2019 Tracked Changes. Jewellery and precious metals. Fineness of precious metal alloys
BS EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided. Determination and verification of case-hardening depth by a micro-hardness test
19/30367136 DC BS ISO 22764. Jewellery and precious metals. Precious metal. Fineness of solders used with precious metal jewellery alloys
BS ISO 23345:2021 Jewellery and precious metals. Non destructive precious metal fineness confirmation by ED-XRF
BS ISO 11877:2008 Hardmetals - Determination of silicon in cobalt metal powders - Photometric method
BS ISO 22764:2020 Jewellery and precious metals. Fineness of solders used with precious metal jewellery alloys

YU-JUS, Metal Nitrogen Density

JUS C.A2.028-1978 Metallic powders - determination ofapparent density by cup andfunnel method
JUS C.A2.029-1990 Metaliic pcmders. ?etermination of tap density
JUS C.A2.038-1987 Physical tests of meta/s. Determination ofapparent density ofmetallic povvders. Funnel method
JUS C.A2.039-1987 Physical tests of metafs. ?etermination of apparent density of metallic povvders. Oscillating funnel method
JUS M.Z2.032-1986 Hermetfcally sealed metal cans
JUS C.A2.037-1987 Phisical tests ofmetafs. Determination ofapparentdensity ofmetallic povvders. Scott volumeter method
JUS C.A4.055-1987 Mechanical testing of meta/s. Determination of apparent hardness ofs/nteres metal materials, excluding hardmeta/s. Case-hardened ferrous materials, surface enriched bycarbon orcarbon and nitrogen
JUS C.A2.041-1990 Perneable sintered metal materials. Determinaticm of densitj, oil content and open porosity
JUS M.Z2.026-1986 Hermetically seale? metal foo? cans. Specifications.
JUS M.Z2.026-1977 Hermetically seale? metal foo? cans. Specifications.

Association Francaise de Normalisation, Metal Nitrogen Density

NF A95-332*NF EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density.
NF A95-112*NF EN ISO 3953:2011 Metallic powders - Determination of tap density.
NF A95-112:1995 Metallic powders. Determination of tap density.
NF EN ISO 3369:2010 Matériaux en métal fritté imperméable et métaux-durs - Détermination de la masse volumique
NF EN ISO 3953:2011 Poudres métalliques - Détermination de la masse volumique après tassement
NF A95-313:1993 Impermeable sintered metal materials and hardmetals. Determination of density.
NF A95-116:1980 Powder metallurgy. Metallic powders. Determination of apparent density by oscillating funnel method.
NF EN ISO 2738:2000 Matériaux métalliques frittés, à l'exclusion des métaux durs - Matériaux métalliques frittés perméables - Détermination de la masse volumique, de la teneur en huile et de la porosité ouverte
NF A02-052:2021 Tools and mechanical parts - Nitriding and nitrocarburizing of ferrous products
NF A95-117-1:2010 Metallic powders - Determination of apparent density - Part 1 : funnel method.
NF A95-311*NF EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity.
NF A95-111-1:1993 Metallic powders. Determination of apparent density. Part 1 : funnel method.
NF A95-117-1*NF EN ISO 3923-1:2018 Metallic powders - Determination of apparent density - Part 1 : funnel method
NF EN ISO 3923-1:2018 Poudres métalliques - Détermination de la masse volumique apparente - Partie 1 : méthode de l'entonnoir
NF A95-311:1977 POWDER METALLURGY. PERMEABLE SINTERED METAL MATERIALS. DETERMINATION OF DENSITY AND OPEN POROSITY.
NF A06-373*NF EN 10179:1989 Chemical analysis of ferrous materials. Determination of nitrogen (trace amounts) in steels. Spectrophotometric method.
NF A07-020*NF EN ISO 9202:2019 Jewellery and precious metals - Fineness of precious metal alloys
NF S94-059:1997 Implants for surgery. Metallic materials. Wrought high nitrogen stainless steel.
NF H31-359:1990 Metal packaging. Openings.
NF A70-020:1993 Jewellery. Fineness of precious metal alloys.
NF L10-035*NF EN 6018:2017 Aerospace series - Test methods for metallic materials - Determination of density according to displacement method
NF EN 6018:2017 Série aérospatiale - Méthodes d'essais applicables aux matériaux métalliques -Détermination de la densité par la méthode de déplacement
NF L93-711:1961 Watertight reusable metal containers.
NF A95-348:1984 Powder metallurgy. Sintered ferrous materials, carburized or carbonitried. Determination of effective case depth by the Vickers microhardness testing method.
NF H33-006:1989 Metal containers. Hermetically metal cans for carbonated drinks. Designation and dimensional characteristics.
NF A95-115*NF EN 23923-2:1993 Metallic powders. Determination of apparent density. Part 2 : scott volumeter method.
NF EN 23923-2:1993 Poudres métalliques - Détermination de la masse volumique apparente - Partie 2 : méthode du volumètre de scott.
NF E48-065-3*NF EN ISO 9974-3:2000 Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3 : stud ends with metal-to-metal sealing (type B)
NF EN ISO 4507:2007 Matériaux ferreux frittés, cémentés ou carbonitrurés - Détermination et vérification de la profondeur de cémentation par mesurage de la microdureté
NF H31-358:1986 Metal packaging. Tight head cylindrical drums. Dimensions.
NF S94-051-9:2007 Implants for surgery - Metallic materials - Part 9 : wrought high nitrogen stainless steel.

Danish Standards Foundation, Metal Nitrogen Density

DS/EN 23369:1994 Impermeable sintered metal materials and hardmetals-Determination of density
DS/EN 23953:1994 Metallic powders. Determination of tap density
DS/EN ISO 3953:2011 Metallic powders - Determination of tap density
DS/EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density
DS/EN 23923-1:1994 Metallic powders. Determination of apparent density. Part 1: Funnel method
DS/EN ISO 3923-1:2010 Metallic powders - Determination of apparent density - Part 1: Funnel method
DS/ISO 3923-2:1994 Metallic powders - Determination of apparent density - Part 2: Scott volumeter method
DS/EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity
DS/EN 23923-2:1994 Metallic powders. Determination of apparent density. Part 2: Scott volumeter method
DS/EN 29202:2000 Jewellery - Fineness of precious metal alloys
DS/EN 1904:2001 Precious metals - The finenesses of solders used with precious metal jewellery alloys
DS/EN ISO 4507:2007 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Metal Nitrogen Density

GB 5162-1985 Metallic powders－Determination of tap density
GB/T 5162-1985 Metallic powders--Determination of tap density
GB/T 5162-2006 Metallic powders.Determination of tap density
GB/T 1423-1996 Method of measurement of density for precious metals and their alloys
GB/T 3850-2015 Impermeable sintered metal materials and hardmetals.Determination of density
GB/T 3850-1983 Impermeable sintered metal materials and hardmetals--Determination of density
GB/T 10421-2002 Sintered metal friction materials--Determination of density
GB/T 5163-1985 Permeable sintered metal materials--Determination of density
GB 10267.5-1988 Analytical method for calcium metal Distillation-Nessler reagent photometric determination of nitrogen
GB/T 10267.5-1988 Method for analysis of calcium metal--The determination of nitrogen by distillation--Nessler reagent photometric method
GB/T 21385-2008 Metal-seated ball valve
GB/T 8654.1-1988 Methods for chemical analysis of manganese metal--The ortho-phenanthroline photometric method for the determination of iron content
GB/T 5161-2014 Metallic powders.Determination of effective density.Liquid immersion method
GB/T 31850-2015 Test method for thermogravimetry(TG) of no-matallic sealing materials
GB/T 1464-1987 Test method for density of nonmetal sandwich constructions or cores
GB/T 5161-1985 Metallic powders--Determination of effective density--Liquid immersion method
GB/T 16480.5-1996 Method for chemical analysis of yttrium and yttium oxide--Determination of nitrogen content
GB/T 4702.7-2016 Chromium metal.Determination of nitrogen content.Distillation-nessler reagent spectrophotometric method
GB/T 21648-2023 Metal wire woven dense mesh
GB/T 21648-2008 Industrial dense woven wire cloth
GB/T 13984-1992 Diazo and Microfoam Film Visual Density Specifications
GB/T 1479-1984 Metallic powders--Determination of apparent density--Part 1:Funnel method
GB/T 1479.1-2011 Metallic powders—Determination of apparent density—Part 1:Funnal method
GB/T 13390-2008 Metallic powder.Determination of the specific surface area.Method of nitrogen adsorption
GB/T 13390-1992 Metallic powder--Determination of the specific surface area--Method of nitrogen adsorption
GB/T 27971-2011 Non-metallic gaskets. Terms
GB/T 8654.1-2007 Manganese metal,ferromanganese-silicon,ferromanganese and nitrogen-bearing ferromanganese Determination of iron content The ortho-phenanthrdine spectrophotometric method and the titanium trichloride-potassium dichromate titrimetric method
GB/T 5163-2006 Sintered metal materials,excluding hardmetals.Permeable sintered metal materials.Determination of density,oil content,and open porosity
GB/T 5686.4-2008 Ferromanganese, ferromanganese-silicon, nitrogen-bearing ferromanganese and manganese metal. Determination of phosphorus content. Molybdenum blue photometric method and alkali content titrimetric method
GB/T 5061-1998 Metallic powders--Determination of apparent density Part 3: Oscillating funnel method
GB/T 5686.4-2022 Ferromanganese, ferromanganese-silicon, nitrogen-bearing ferromanganese and manganese metal—Determination of phosphorus content—Molybdenum blue spectrophotometric method and bismuth phosphomolybdate b
GB/T 14265-1993 General rule of chemical analysis for hydrogen, oxygen, nitrogen, carbon and sulfur in metal's materials
GB/T 23262-2009 Test method for nonmetallic sealing packings
GB/T 5060-1985 Metallic powders--Determination of apparent density--Part 2: Scott volumeter method
GB/T 1479.2-2011 Metallic powders—Determination of apparent density—Part 2:Scott volumeter method
GB/T 12690.19-1990 Rare-earth metals and their oxides--Determination of iron content--1,10-phenanthroline spectrophotometric method
GB/T 7749-1987 Test method of cleavage strength of adhesive (metal to metal)
GB 7749-1987 Test Method for Splitting Strength of Adhesives (Metal to Metal)
GB/T 32282-2015 Measurement of Dislocation Density in Gallium Nitride Single Crystal by Cathodoluminescence Microscopy
GB/T 12221-2005 Metal valves-Face to face,end to end,center to face and center to end dimensions

HU-MSZT, Metal Nitrogen Density

国家市场监督管理总局、中国国家标准化管理委员会, Metal Nitrogen Density

GB/T 5162-2021 Metallic powders—Determination of tap density
GB/T 40380.1-2021 Metallic powders—Determination of apparent density and flow rate at elevated temperatures—Part 1: Determination of apparent density at elevated temperatures
GB/T 41079.1-2021 Test methods for physical properties of liquid metals—Part 1: Determination of density

German Institute for Standardization, Metal Nitrogen Density

DIN EN ISO 3953:2011-05 Metallic powders - Determination of tap density (ISO 3953:2011); German version EN ISO 3953:2011
DIN 30902:2016 Heat treatment of ferrous materials - Light-microscopical determination of the depth and porosity of the compound layer of nitrided and nitro-carburized ferrous parts
DIN 30902:2016-12 Heat treatment of ferrous materials - Light-microscopical determination of the depth and porosity of the compound layer of nitrided and nitro-carburized ferrous parts
DIN EN ISO 2738:2000-02 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999
DIN EN ISO 2738:2000 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999); German version EN ISO 2738:1999
DIN ISO 3369:1990 Impermeable sintered metal materials and hardmetals; determination of density; identical with ISO 3369:1975
DIN EN ISO 3369:2010-08 Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006); German version EN ISO 3369:2010
DIN EN 10179:1990-04 Chemical analysis of ferrous materials; determination of nitrogen (trace amounts) in steels; spectrophotometric method; German version EN 10179:1989
DIN ISO 3923-1:1980 Metallic powders; determination of apparent density, part 1: funnel method
DIN EN ISO 3923-1:2018-10 Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2018); German version EN ISO 3923-1:2018
DIN EN ISO 9202:2019-09 Jewellery and precious metals - Fineness of precious metal alloys (ISO 9202:2019); German version EN ISO 9202:2019
DIN EN 10179:1990 Chemical analysis of ferrous materials; determination of nitrogen (trace amounts) in steels; spectrophotometric method; German version EN 10179:1989
DIN 17022-4:1998-01 Heat treatment of ferrous materials - Methods of heat treatment - Part 4: Nitriding and nitrocarburizing
DIN EN 6018:2018 Aerospace series - Test methods for metallic materials - Determination of density according to displacement method; German and English version EN 6018:2017
DIN EN 6018:2018-01 Aerospace series - Test methods for metallic materials - Determination of density according to displacement method; German and English version EN 6018:2017
DIN EN ISO 1179-4:2008 Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only with metal-to-metal sealing (type B) (ISO 1179-4:2007); German version EN ISO 1179
DIN EN ISO 9202:2019 Jewellery and precious metals - Fineness of precious metal alloys (ISO 9202:2019)
DIN EN 1904:2001-02 Precious metal - The finenesses of solders used with precious metal jewellery alloys; German version EN 1904:2000
DIN EN ISO 3953:2011 Metallic powders - Determination of tap density (ISO 3953:2011); German version EN ISO 3953:2011
DIN ISO 3923-2:1987 Metallic powders; determination of apparent density; Scott volumeter method; identical with ISO 3923/2, edition 1981
DIN EN ISO 3923-1:2018 Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2018)
DIN 5065:2010 Packaging - Plastic closures for metallic tubes
DIN EN ISO 4507:2007-05 Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case-hardening depth by a micro-hardness test (ISO 4507:2000); German version EN ISO 4507:2007
DIN EN 29202:1993 Jewellery; fineness of precious metal alloys (ISO 9202:1991); german version EN 29202:1992

Korean Agency for Technology and Standards (KATS), Metal Nitrogen Density

KS D ISO 3369:2011 Impermeable sintered metal materials and hardmetals-Determination of density
KS D ISO 3369:2015 Impermeable sintered metal materials and hardmetals－Determination of density
KS D 0036-2001 METHOD FOR DETERMINATION OF APPARENT DENSITY FOR METAL POWDERS
KS D 0036-1985 METHOD FOR DETERMINATION OF APPARENT DENSITY FOR METAL POWDERS
KS D ISO 2738:2011 Sintered metal materials, excluding hardmetals-Permeable sintered metal materials-Determination of density, oil content and open porosity
KS D ISO 2738:2013 Sintered metal materials, excluding hardmetals-Permeable sintered metal materials-Determination of density, oil content and open porosity
KS D 0033-2001 Method for determination of density of metal powder sintered materials
KS D 0033-2001(2021) Method for determination of density of metal powder sintered materials
KS D 0036-1980(2000) METHOD FOR DETERMINATION OF APPARENT DENSITY FOR METAL POWDERS
KS D 0033-1990 Method for determination of density of metal powder sintered materials
KS D 0033-1985 Method for determination of density of metal powder sintered materials
KS K 9322-2000 Porous sintered metal single flange rings
KS K 9322-1985 Porous sintered metal single flange rings
KS M ISO 903:2003 Aluminium oxide primarily used for the production of aluminium－Determination of untamped density
KS D ISO 3923-1:2009 Metallic powders－Determination of apparent density－Part 1：Funnel method
KS D ISO 3923-1:2019 Metallic powders — Determination of apparent density —Part 1: Funnel method
KS D 0033-2001(2016) Method for determination of density of metal powder sintered materials
KS B 3617-2002 Grain sizes of diamond or cubic boron nitride
KS D ISO 3923-2-2001(2011) Method for determination of apparent density of metal powers－Scott volumeter method
KS M ISO 901:2003 Aluminium oxide primarily used for the production of aluminium－Determination of absolute density－Pyknometer method
KS B 5320-2008(2018) Bimetallic thermometers
KS B 5217-1990(2020) Bimetallic thermometers for atmospheric temperature
KS B 5320-1985 Bimetallic thermometers
KS B 5217-1983 Bimetallic thermometers for atmospheric temperature
KS B ISO 9974-3-2004(2009) Connections for general use and fluid power－Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing－Part 3：Stud ends with metal-to-metal sealing (type B)
KS D ISO 9202:2011 Jewellery-Fineness of precious metal alloys
KS D ISO 4507-2004(2019) Sintered ferrous materials, carburized or carbonitrided -Determination and verification of case hardening depth by a micro hardness test
KS C 8544-2011 Sealed nickel-metal hydride secondary cells
KS C 8544-2016(2021) Sealed nickel-metal hydride secondary cells
KS D ISO 3923-2:2001 Method for determination of apparent density of metal powers-Scott volumeter method
KS D ISO 3923-2:2013 Method for determination of apparent density of metal powers－Scott volumeter method
KS D ISO 9202-2011(2016) Jewellery－Fineness of precious metal alloys
KS D ISO 3543-2002(2022) Metallic and non-metallic coatings－Measurement of thickness－Beta backscatter method
KS C IEC 61951-2:2003 Secondary cells and batteries containing alkaline or other non-acid electrolytes-Portable sealed rechargeable single cells-Part 2:Nickel-metal hydride
KS P ISO 5832-9:2012 Implants for surgery-Metallic materials-Part 9:Wrought high nitrogen stainless steel

IT-UNI, Metal Nitrogen Density

UNI 7359-1974
UNI 7358-1974
UNI 6931-1971 Aircraft metallic materials. Nitriding alloyed steel (C 0,31%, Cr 3,05% and Mo 0,40%).

PL-PKN, Metal Nitrogen Density

PN H04930-01-1989 Metallic powders Determination of apparent density Prescription
PN H04930-02-1989 Metallic powders Determination of apparent density Funnel method
PN H04930-03-1989 Metallic powders Determination of apparent density Volumeter method
PN H04930-04-1989 Metallic powders Determination of apparent density Oscillating funnel method
PN H04232-08-1986 Chemical analysis of alloy components Chromium metallic Determination of nitrogen
PN EN 10179-1992 Chemical analysis of ferrous materials. Determination of nitrogen (trace amounts) in steels. Spectrophotometric method
PN BN 2221-01-1962
PN M82162-1960 Studs semi-precise length of the metal end 1d
PN M82164-1960 Studs semi-precise length of the metal end 2d
PN H04321-1986 Metalls Testing of shear strength
PN M03150-1962 Metal cutting machine-tools. Speeds
PN M82125-1990 Studs length of the metal end 1d
PN M82131-1990 Studs length of the metal end 1,25d
PN M82137-1990 Studs length of the metal end 2d

NL-NEN, Metal Nitrogen Density

NEN-ISO 3369:1993 Impermeable sintered metal materials and hardmetals. Determination of density (ISO 3369:1975)
NEN-ISO 3953:1993 Metallic powders. Determination of tap density (ISO 3953:1985)
NEN-ISO 3923-1:1993 Metallic powders. Determination of apparent density. Part 1: Funnel method (ISO 3923-1:1979)

Defense Logistics Agency, Metal Nitrogen Density

DLA A-A-59119 VALID NOTICE 1-2003 LAPPING MACHINES, METAL WORKING, HIGH-PRECISION, FLAT SURFACE
DLA A-A-59119-1997 LAPPING MACHINES, METAL WORKING, HIGH-PRECISION, FLAT SURFACE
DLA MS27798 REV B-2010 METAL SEAL STRIP (TEAR BAND)
DLA AN901 REV 10-2011 GASKET ?METAL TUBE CONNECTION SEAL
DLA AN901 REV 9-2006 GASKET - METAL TUBE CONNECTION SEAL

IN-BIS, Metal Nitrogen Density

BE-NBN, Metal Nitrogen Density

NBN-EN 23369-1993 Impermeable sintered metal materials and hardmetals. Determination of density (ISO 3369: 1975)
NBN-EN 23953-1993 Metallic powders. Determination of tap density (ISO 3953: 1985)
NBN-EN 10179-1992 Chemical analysis of ferrous materials. Determination of nitrogen (trace amounts) in steels. Spectrophotometric method
NBN I-839-1968
NBN-EN 23923-1-1993 Metallic powders. Determination of apparent density. Part 1: Funnel method (ISO 3923-1: 1979)

Lithuanian Standards Office , Metal Nitrogen Density

LST EN ISO 3953:2011 Metallic powders - Determination of tap density (ISO 3953:2011)
LST EN 10179-2000 Chemical analysis of ferrous materials - Determination of nitrogen (trace mounts) in steel - Spectrophotometric method
LST EN ISO 3369:2010 Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006)
LST EN ISO 2738:2002 Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999)
LST EN ISO 3923-1:2010 Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2008)
LST EN 1904-2003 Precious metals - The finenesses of solders used with precious metal jewellery alloys

AENOR, Metal Nitrogen Density

UNE-EN ISO 3953:2011 Metallic powders - Determination of tap density (ISO 3953:2011)
UNE 36317-2:1989 Chemical analysis of ferrous materials - Determination of nitrogen (trace mounts) in steel - Spectrophotometric method
UNE-EN ISO 3369:2011 Impermeable sintered metal materials and hardmetals - Determination of density (ISO 3369:2006)
UNE-EN ISO 3923-1:2011 Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2008)
UNE-EN 1904:2001 Precious metals - The finenesses of solders used with precious metal jewellery alloys.
UNE-EN ISO 2738:2000 SINTERED METAL MATERIALS, EXCLUDING HARDMETALS. PERMEABLE SINTERED METAL MATERIALS. DETERMINATION OF DENSITY, OIL CONTENT AND OPEN POROSITY (ISO 2738:1999)

GM North America, Metal Nitrogen Density

GM GM6430M-1998 Decorative Metal Coating - Metallic Nitride Vapor Deposition over Chrome Plate
GM 9985509-1989 Sealant - Adhesive, Elastometric, Metal to Metal
GM GM9020P-1988 Test for Metal to Metal Sealers - Adhesives
GM 9985303-1994 Sealant - Adhesive, Elastomeric, Metal to Metal
GM 9981673-2002 Adhesive - Metal-to-Metal Low Strength
GM 9985051-2002 Sealant Metal to Glass Silicone Type

Professional Standard - Machinery, Metal Nitrogen Density

JB/T 8527-2015 Metallic sealing butterfly valve
JB/T 8527-1997 Butterfly valves for metal sealing
JB/ZQ 4467-2006 Metallic gaskets (PN6.3-PN40)
JB/T 5979-1992 Metal wire woven dense mesh
JB/T 10673-2006 Metal-sealed unfurled valve
JB/T 8105.2-1999 Metal seal connections of vacuum gauges
JB/T 11152-2011 Metal seal lift type plug valve
JB/T 10806-2007 Specification of azo metal complex type charge control agent
JB/T 8803-2015 Bimetallic thermometers
JB/T 8803-1998 Bimetallic thermometer
JB/T 8723-2008 Welded metal-bellows mechanical seal
JB/T 8723-2022 Welded metal bellows mechanical seal
JB/T 8723-1998 Welded mteal-bellows mechanical seal for pump

Group Standards of the People's Republic of China, Metal Nitrogen Density

T/WZBF 013-2022 Metal-seated ball valve
T/WZBF 035-2023 Four Eccentric Metal Seal Butterfly Valve
T/ZZB 2878-2022 Metal seal non-slam axial flow check valves
T/ZZB 0464-2018 Nuclear grade metal graphite gasket
T/GDASE 0041-2023 Test methods for bimetallic composite pipes for submarine pipelines Tightness test
T/ZZB 1429-2019 Metallic glossy weatherstrip for automobile
T/HGGZ 001-2023 Adhesive sealants for metal door assembly

Professional Standard - Textile, Metal Nitrogen Density

FZ/T 60009-1993 Determination of Needle-punched Density of Metal Coated Composite Floc

KR-KS, Metal Nitrogen Density

KS D ISO 3369-2011 Impermeable sintered metal materials and hardmetals－Determination of density
KS D ISO 3923-1-2019 Metallic powders — Determination of apparent density —Part 1: Funnel method
KS D ISO 2738-2011 Sintered metal materials, excluding hardmetals－Permeable sintered metal materials－Determination of density, oil content and open porosity
KS B 5320-2008(2023) Bimetallic thermometers

Professional Standard - Non-ferrous Metal, Metal Nitrogen Density

YS/T 372.18-2006 Methods for elementary analysis of precious alloy. Determination of gadolinium content. Chlorophosphonazo Ⅲ spectrophotometry
YS/T 372.19-2006 Methods for elementary analysis of precious alloy. Determination of yttrium content.Chlorophosphonazo Ⅲ spectrophotometry

工业和信息化部, Metal Nitrogen Density

JC/T 2053-2020 Non-metal sealing packing
JB/T 10673-2022 Expanded metal seal valve
JC/T 884-2016 Construction sealants for metal panels
HG/T 5838-2021 Metal skeleton foam rubber composite sealing plate

Professional Standard - Light Industry, Metal Nitrogen Density

QB/T 2855-2007 Jewellery-Nondestructive quantitative determination of precious metal-Consistency syntheses method

Professional Standard-Ships, Metal Nitrogen Density

CB/T 4414-2015 Marine metal seal butterfly valves

TR-TSE, Metal Nitrogen Density

TS 1118-1972 HERMETICALLY SEALED METAL FOOD CONTAINERS
TS 2305-1976 PERMEABLE SINTERED METAL MATERIALS DETERMINATION OF DENSITY AND OPEN POROS?TY

U.S. Air Force, Metal Nitrogen Density

AIR FORCE MS27798 REV A NOTICE 2-1996 METAL SEAL STRIP (TEAR BAND)
AIR FORCE MS27798 REV A VALID NOTICE 1-1990 METAL SEAL STRIP (TEAR BAND)
AIR FORCE MS27798 REV A-1974 METAL SEAL STRIP (TEAR BAND)

Society of Automotive Engineers (SAE), Metal Nitrogen Density

SAE AMS-HH-G-101-2000 Gasket, Metallic-Encased
SAE ARP674-1964 METAL RING SEAL GROOVE DESIGN
SAE AMS-HH-G-101A-2014 Gasket, Metallic-Encased
SAE AIR1108-2013 Groove Design - Metal Face Seal
SAE AIR1108A-2019 Groove Design - Metal Face Seal
SAE ARP674C-2001 (R) Groove Design, Metal O-Ring Gasket
SAE AIR1108-1969 Groove Design-Metal Face Seal
SAE AMS7325A-1959 RINGS, SEALING, TUBULAR METAL, CORROSION RESISTANT STEEL
SAE AMS7725A-1976 TUNGSTEN ALLOY, SINTERED, HIGH DENSITY
SAE AMS-T-21014-1998 Tungsten Base Metal, High Density Should Be Used Instead of MIL-T-21014D, Which Was Cancelled on October 5, 1998
SAE TS104-5-2006 TS104 Manufacturing Specification for Gaskets (Metallic Seals)
SAE AMS7725-1957 ALLOY, SINTERED, HIGH DENSITY Tungsten Base
SAE RS-734-1-1979 RS734 Groove Dimensions for Gaskets (Metallic Seals)

BG-BDS, Metal Nitrogen Density

BGC EN 23923-1-2001 Metallic powders - Determination of apparent density - Part 1: Funnel method
BGC EN 23923-2-2001 Metallic powder - Determination of apparent density - Part 2: Scott volumeter method

Professional Standard - Aviation, Metal Nitrogen Density

HB 6577-1992 Test method for smoke density of non-metallic materials inside civil aircraft cabin
HB 6577-2014 Test method for smoke density of non-metallic materials inside civil aircraft cabin
HB 5441.4-1989 Performance testing of powder metallurgy products and powders - Test method for bulk density of metal powders
HB 5441.5-1989 Performance testing of powder metallurgy products and powders - Test method for tap density of metal powders
HB 5441.7-1989 Performance testing of powder metallurgy articles and powders Test methods for density and porosity of permeable sintered metal materials

ES-UNE, Metal Nitrogen Density

UNE-EN ISO 3923-1:2019 Metallic powders - Determination of apparent density - Part 1: Funnel method (ISO 3923-1:2018)
UNE-EN ISO 9202:2020 Jewellery and precious metals - Fineness of precious metal alloys (ISO 9202:2019)
UNE-EN 6018:2017 Aerospace series - Test methods for metallic materials - Determination of density according to displacement method (Endorsed by Asociación Española de Normalización in December of 2017.)

Military Standard of the People's Republic of China-General Armament Department, Metal Nitrogen Density

GJB 3419-1998 Method for determination of density and impurity elements of depleted uranium metal ingots
GJB 446-1988 Adhesive 90° Peel Strength Test Method (Metal to Metal)

Professional Standard - Ferrous Metallurgy, Metal Nitrogen Density

YB/T 4059-2007 High temperature cladding metal O-ring
YB/T 4059-1991 Metal clad high temperature seal ring

Professional Standard - Chemical Industry, Metal Nitrogen Density

HG/T 4169-2011 Non-contact metal honeycomb seal

冶金工业部, Metal Nitrogen Density

YB 4059-1991 Metal covered high temperature sealing ring

Canadian Standards Association (CSA), Metal Nitrogen Density

CSA C22.2 NO.56-2013 Flexible metal conduit and liquid-tight flexible metal conduit (Sixth Edition)

工业和信息化部/国家能源局, Metal Nitrogen Density

JB/T 12981-2016 Polycrystalline cubic boron nitride for superabrasive metal processing

VN-TCVN, Metal Nitrogen Density

TCVN 5545-1991 Gold and gold alloy.Density method of measurement

U.S. Military Regulations and Norms, Metal Nitrogen Density

ARMY MIL-B-50772 NOTICE 4-1997 BONDING OF PRECISION MIRRORS (GLASS-TO-METAL)
ARMY MIL-B-50772 REINST NOTICE 3-1996 BONDING OF PRECISION MIRRORS (GLASS-TO-METAL)
ARMY MIL-B-50772 VALID NOTICE 1-1988 BONDING OF PRECISION MIRRORS (GLASS-TO-METAL)
ARMY MIL-B-50772 (1)-1975 BONDING OF PRECISION MIRRORS (GLASS-TO-METAL)
ARMY MIL-B-50772-1972 BONDING OF PRECISION MIRRORS (GLASS-TO-METAL)
ARMY MIL-S-11388 D NOTICE 3-2013 SEALING MATERIAL FOR METAL CONTAINER SEAMS
ARMY MIL-S-11388D-1991 SEALING MATERIAL FOR METAL CONTAINER SEAMS
ARMY MIL-S-11388 D REINST NOTICE 2-1999 SEALING MATERIAL FOR METAL CONTAINER SEAMS
ARMY MIL-S-11388 D-1991 SEALING MATERIAL FOR METAL CONTAINER SEAMS

General Motors Corporation (GM), Metal Nitrogen Density

GM 9984192-1997 Sealer - Preformed Patches Revision A

Professional Standard - Agriculture, Metal Nitrogen Density

GB 6308.2-1986 Metal Sealed Vacuum Gauge Fittings

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Metal Nitrogen Density

GB/T 1479.3-2017 Metallic powders－Determination of apparent density－Part 3: Oscillating funnel method
GB/T 14265-2017 General rule of chemical analysis for hydrogen,oxygen,nitrogen,carbon and sulfur in metallic materials

Professional Standard - Forestry, Metal Nitrogen Density

LY/T 3144-2019/ISO 8970:2010 Density requirements for test specimens for connection tests of wood-metal fasteners for structural use

国家林业和草原局, Metal Nitrogen Density

LY/T 3144-2019 Density requirements for wood-to-metal fastener connection test materials for structural use

(U.S.) Ford Automotive Standards, Metal Nitrogen Density

FORD FLTM EU-BA 054-01-2000 METAL FOIL METHOD FOR DETERMINATION OF C- AND N-POTENTIAL OF CARBURIZING AND CARBONITRIDING FURNACE ATMOSPHERES
FORD FLTM EU-BU 003-2-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
FORD FLTM BU 003-2-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
FORD FLTM BU 003-02-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES
FORD FLTM EU-BU 003-02-2000 BLOCK SHEAR STRENGTH OF METAL TO METAL ADHESIVES

PT-IPQ, Metal Nitrogen Density

ES-AENOR, Metal Nitrogen Density

UNE 100-102-1988

Professional Standard - Meteorology, Metal Nitrogen Density

QX/T 28-2004 Bimetallic thermograph

Professional Standard - Electron, Metal Nitrogen Density

SJ 1771-1981 Metallic bell cover for vacuum equipment--Sealing collar

Standard Association of Australia （SAA）, Metal Nitrogen Density

NO-SN, Metal Nitrogen Density

NS 1709-1967 Metal sealing plugs with external hexagon head

American National Standards Institute （ANSI), Metal Nitrogen Density

ANSI/ASTM E140:2002 Hardness Conversion Tables for Metals

CEN - European Committee for Standardization, Metal Nitrogen Density

EN ISO 9202:2019 Jewellery and precious metals - Fineness of precious metal alloys

Indonesia Standards, Metal Nitrogen Density

SNI 09-4044-1996 Asbestos metal sheet gaskets for two-wheel motor vehicles

United States Navy, Metal Nitrogen Density

NAVY MMM-A-1754 NOTICE 1-2001 ADHESIVE AND SEALING COMPOUND, EPOXY, METAL FILLED
NAVY MMM-A-1754-1973 ADHESIVE AND SEALING COMPOUND, EPOXY, METAL FILLED

Underwriters Laboratories (UL), Metal Nitrogen Density

UL 1660-2001 Liquid-tight flexible nonmetallic conduit

European Association of Aerospace Industries, Metal Nitrogen Density

AECMA PREN 6018-1990 Aerospace Series Test Methods for Metallic Materials Determination of Density According to Displacement Method Issue P 1

Professional Standard - Aerospace, Metal Nitrogen Density

QJ 2341.1-1992 Cubic boron nitride/tungsten carbide high rigidity through hole boring tool

Association of German Mechanical Engineers, Metal Nitrogen Density

VDI 3394-1980 Arrangement and use of diamond and CBN grinding devices for metal working
VDI/VDE 2616 Blatt 1-2012 Hardness testing of metallic materials
VDI/VDE 2616 Blatt 1-2002 Hardness testing of metallic materials

Aerospace Industries Association, Metal Nitrogen Density

AIA NAS 956-1963 Tube Bender - Numerical Control, Precision Aircraft Type for Thin Wall, Ferrous and Non- Ferrous Alloys

National Electrical Manufacturers Association（NEMA), Metal Nitrogen Density

NEMA RV 3-2012 Application and Installation Guidelines for Flexible and Liquidtight Flexible Metal and Nonmetallic Conduits
NEMA RV 3-2014 Application and Installation Guidelines for Flexible and Liquidtight Flexible Metal and Nonmetallic Conduits

Professional Standard - Medicine, Metal Nitrogen Density

YY 0605.9-2015 Implants for surgery.Metallic materials.Part 9:Wrought high nitrogen stainless steel