ZH
RU
ES

The mass of the contact plate

The mass of the contact plate, Total:499 items.

In the international standard classification, The mass of the contact plate involves: Welding, brazing and soldering, Materials and articles in contact with foodstuffs, Kitchen equipment, Soil quality. Pedology, Electrical accessories, Cereals, pulses and derived products, Vocabularies, Electronic tubes, Services, Heat treatment, Non-ferrous metals, Paper and board, Veterinary medicine, Resistors, Quality, Rotating machinery, Medical equipment, Rubber and plastics products, Electronic components in general, Linear and angular measurements, Products of the textile industry, Paints and varnishes, Electromechanical components for electronic and telecommunications equipment, Semiconducting materials, Metrology and measurement in general, Electricity. Magnetism. Electrical and magnetic measurements, Information technology (IT) in general, Protection against electric shock, Electrical engineering in general, Fasteners for aerospace construction, Noise with respect to human beings, Acoustics and acoustic measurements, Analytical chemistry, Sports equipment and facilities, Water quality, Plastics, Protective equipment, Aerospace electric equipment and systems, Printed circuits and boards, Optics and optical measurements, Aerosol containers, Food products in general, Ceramics, Installations in buildings, Jewellery, Bearings, Cutting tools, Products of non-ferrous metals, Terminology (principles and coordination), Photography, Nuclear energy engineering, Tobacco, tobacco products and related equipment, Vibration and shock with respect to human beings, Equipment for petroleum and natural gas industries, Petroleum, petroleum products and natural gas handling equipment, Valves, Raw materials for rubber and plastics, Glass, Manufacturing processes in the rubber and plastics industries, Continuous handling equipment.

American National Standards Institute （ANSI), The mass of the contact plate

ANSI/AWS D8.1M:2013 Specification for Automotive Weld Quality - Resistance Spot Welding of Steel
ANSI/EIA 700C000:1996 Sectional Specification for Circular Multicontact Connectors of Assessed Quality (for Frequencies Essentially Below 3MHz)
ANSI/EIA 700D000:1997 Sectional Specification for Discrete Contacts of Certified Quality
ANSI/SCTE 152-2008 Test Procedure for Contact Resistance Measurement of Mainline Plug Interface
ANSI/EIA 498BOOO:1988 Sectional Specification, Touch Stroke Switch Panels of Certified Quality / Note: Approved 1988-04-28.
ANSI/ASHRAE 62.1 Addendum c-2011 Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE 62.1l-2012 Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE 62.1 Addendum h-2012 Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE 62.1 Addendum n-2013 Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE 62.1 Addendum f-2007 Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE 62.1 Addendum b-2010 Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE 62.1 Addendum m-2010 Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE 62.1 Addendum o-2010 Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE 62.1 Addendum j-2013 Ventilation for Acceptable Indoor Air Quality
ANSI/ASHRAE 62.1-2010 Ventilation for Acceptable Indoor Air Quality
ANSI/AWS D8.10M:2021 Specification for Automotive Weld Quality-Laser Beam Welding of Steel (1st Edition)

German Institute for Standardization, The mass of the contact plate

DIN EN ISO 8442-8:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 8: Requirements for silver table and decorative holloware (ISO 8442-8:2000); German version EN ISO 8442-8:2000
DIN EN ISO 8442-6:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 6: Lightly silver plated table holloware protected by lacquer (ISO 8442-6:2000); German version EN ISO 8442-6:2000
DIN EN 920:2000-12 Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract; German version EN 920:2000
DIN EN 920:2000 Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract; German version EN 920:2000
DIN EN ISO 8442-7:2001 Materials and articles in contact with foodstuffs - Cutlery and table holloware - Part 7: Requirements for table cutlery made of silver, other precious metals and their alloys (ISO 8442-7:2000); German version EN ISO 8442-7:2000
DIN EN 60990:2000 Methods of measurement of touch current and protective conductor current (IEC 60990:1999); German version EN 60990:1999
DIN 41640-80:1988-05 Measuring methods and testing procedures for electromechanical components; test A: contact force, resilient female contacts
DIN EN ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2000); German version EN ISO 12179:2000
DIN EN 60512-16-7:2009 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (IEC 60512-16-7:2008); German version EN 60512-16-7:2008
DIN EN 60512-16-7:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (IEC 60512-16-7:2008); German version EN 60512-16-7:2008 / Note: DIN I...
DIN CEN/TS 14577:2004 Materials and articles in contact with foodstuffs - Plastics - Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1000 Daltons; German version CEN/TS 14577:2003
DIN 53756:1974 Testing of plastics; storage test in contact with chemicals
DIN EN 13130-8:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 8: Determination of isocyanates in plastics; German version EN 13130-8:2004
DIN EN ISO 18187:2018 Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis (ISO 18187:2016)
DIN EN ISO 18187:2018-07 Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis (ISO 18187:2016); German version EN ISO 18187:2018
DIN EN 13130-4:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 4: Determination of 1,3-butadiene in plastics; German version EN 13130-4:2004
DIN EN 2349-202:2007-05 Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass; German and English version EN 2349-202:2006
DIN 50977:2005 Measurement of coating thickness - Non contact measurement of coating thickness on continuously moving objects
DIN EN 13130-6:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 6: Determination of vinylidene chloride in plastics; German version EN 13130-6:2004
DIN EN 2349-202:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass; German and English version EN 2349-202:2006
DIN 50977:2005-12 Measurement of coating thickness - Non contact measurement of coating thickness on continuously moving objects
DIN EN 13130-2:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 2: Determination of terephthalic acid in food simulants; German version EN 13130-2:2004
DIN EN 16296:2021-07 Imperfections in thermoplastics welded joints - Quality levels; German version EN 16296:2021
DIN 55660-6:2014 Paints and varnishes - Wettability - Part 6: Measurement of dynamic contact angle
DIN EN 1541:2001 Paper and board intended to come into contact with foodstuffs - Determination of formaldehyde in an aqueous extract; German version EN 1541:2001
DIN EN 14850:2006-02 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height; German version EN 14850:2005
DIN EN 13130-5:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 5: Determination of vinylidene chloride in food simulants; German version EN 13130-5:2004
DIN EN 13130-3:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 3: Determination of acrylonitrile in food and food simulants; German version EN 13130-3:2004
DIN EN 60512-16-9:2009-03 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force (IEC 60512-16-9:2008); German version EN 60512-16-9:2008 / Note: DIN IEC 60512-8 ...
DIN EN 60512-2-2:2004-01 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method (IEC 60512-2-2:2003); German version EN 60512-2-2:2003 / Note: DIN...
DIN EN ISO 18187:2023-08 Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis (ISO/DIS 18187:2023); German and English version prEN ISO 18187:2023 / Note: Date of issue 2023-06-30*Intended as replacement for DIN EN ISO 1818...
DIN EN 13130-7:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Part 7: Determination of monoethylene glycol and diethylene glycol in food simulants; German version EN 13130-7:2004
DIN EN 60512-16-9:2009 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force (IEC 60512-16-9:2008); German version EN 60512-16-9:2008

British Standards Institution (BSI), The mass of the contact plate

BS ISO 15800:2019 Soil quality. Characterization of soil with respect to human exposure
BS EN 119000:1997 Harmonized system of quality assessment for electronic components - Generic specification: dry and mercury wetted reed contact units
BS DD IEC/PAS 62246-2-1:2009 Reed contact units. Heavy-duty reed switches. Quality assessment specification
BS EN 920:2001 Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract
DD CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation - Determination of carbonyl chloride in plastics
BS ISO 18187:2016 Soil quality. Contact test for solid samples using the dehydrogenase activity of $iA$ir$it$ih$ir$io$ib$ia$ic$it$ie$ir $ig$il$io$ib$ii$if$io$ir$im$ii$is
BS IEC 62899-503-3:2021 Printed electronics. Quality assessment. Measuring method of contact resistance for the printed thin film transistor. Transfer length method
BS EN 60512-16-7:2008 Connectors for electronic equipment – Tests and measurements –– Part 16-7: Mechanical tests on contacts and terminations – Test 16g: Measurement of contact deformation after crimping
BS EN ISO 14554-2:2013 Quality requirements for welding. Resistance welding of metallic materials. Elementary quality requirements
BS EN ISO 14554-1:2013 Quality requirements for welding. Resistance welding of metallic materials. Comprehensive quality requirements
BS EN 60990:2000 Methods of measurement of touch current and protective conductor current
BS EN ISO 19403-6:2020 Paints and varnishes. Wettability - Measurement of dynamic contact angle
BS EN 175301-801:2000 Harmonized system of quality assessment for electronic components - Detail specification - High density rectangular connectors, round removable crimp contacts
DD CEN/TS 13130-12:2005 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation - Determination of 1,3-benzenedimethaneamine in food simulants
DD CEN/TS 13130-25:2005 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation - Determination of 4-methyl-1-pentene in food simulants
BS EN ISO 18187:2018 Soil quality. Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis
DD CEN/TS 13130-28:2005 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation - Determination of 1,1,1-trimethylopropane in food simulants
BS 6920-2.3:2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water - Methods of test - Appearance of water
BS EN ISO 12127-1:2015 Clothing to protect against heat and flame. Determination of contact heat transmission through clothing or constituent materials. Contact heat produced by heating cylinder
DD CEN/TS 13130-26:2005 Materials and articles in contact with foodstuffs. Plastics substances subject to limitation - Determination of 1-octene and tetrahydrofuran in food simulants
BS EN 175201-804:2000 Harmonized system of quality assessment for electronic components. Detail specification. Circular connectors. Round contacts, size diameter 1,6 mm, threaded coupling
BS EN 14850:2006 Aerosol containers. Metal containers with 25,4 mm aperture. Measurement of contact height
BS EN 60512-16-9:2008 Connectors for electronic equipment. Tests and measurements. Mechanical tests on contacts and terminations. Test 16i. Grounding contact spring holding force
BS EN 16523-2:2015 Determination of material resistance to permeation by chemicals. Permeation by gaseous chemical under conditions of continuous contact
BS EN 16523-1:2015 Determination of material resistance to permeation by chemicals. Permeation by liquid chemical under conditions of continuous contact
BS EN 16523-1:2015+A1:2018 Determination of material resistance to permeation by chemicals. Permeation by gaseous chemical under conditions of continuous contact
BS EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Mechanical tests on contacts and terminations - Test 16e - Gauge retention force (resilient contacts)
BS EN 14850:2005 Aerosol containers — Metal containers with 25,4 mm aperture — Measurement of contact height
BS EN 60990:2016 Tracked Changes. Methods of measurement of touch current and protective conductor current
DD ENV 12498-1998 Paper and board intended to come into contact with foodstuffs. Determination of cadmium, lead and chromium in an aqueous extract
BS EN 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations — Test 16r: Deflection of contacts, simulation
BS EN 13832-3:2018 Tracked Changes. Footwear protecting against chemicals. Requirements for prolonged contact with chemicals
BS EN 13832-2:2018 Tracked Changes. Footwear protecting against chemicals. Requirements for limited contact with chemicals
PD ISO/TS 17865:2016 Geometrical product specifications (GPS). Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
BS EN 4875:2020 Aerospace series. Surface treatments. Test method for measurement of electrical contact resistance
BS ISO 7086-1:2019 Glass hollowware in contact with food. Release of lead and cadmium - Test method
BS EN 13130-4:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of 1,3-butadiene in plastics
BS EN 13130-8:2004 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of isocyanates in plastics
BS DD CEN/TS 13130-17:2005 Materials and articles in contact with foodstuffs - Plastics substances subject to limitation - Determination of carbonyl chloride in plastics
BS EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations – Test 16c: Contact-bending strength
BS CECC 17001:1984 Specification for harmonized system of quality assessment for electronic components - Blank detail specification - Mercury wetted make contact units for general application
BS EN 16296:2021 Tracked Changes. Imperfections in thermoplastics welded joints. Quality levels
BS 6920-2.1:2000+A3:2008 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water — Part 2: Methods of test — Section 2.1: Samples for testing
BS 6920-2.1:2014 Suitability of non-metallic materials and products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Samples for testing
BS EN 2591-508:2002 Elements of electrical and optical connection - Test methods - Measurement of thickness of coating on contacts

RO-ASRO, The mass of the contact plate

STAS 4479-1982 LOW- VOLTA GE CONTACTOK S AND CONTACT BREAKKRS Special technical requircments for quality
STAS 9368-1973 GERMANUM POINT CONTACT DIODES General technical requirements lor quality
SR 10437-2000 Plastic household articles in contact with foodstuffs. General quality specifications
STAS 12865-1990 Repairable contactors (Nothermetically sealed) for aircraft General technical requirements for quality
STAS SR ISO 3274:1995 Instruments for the measurements of surface roughness by the profile method - Contact (stylus) instruments of consecutive profile transformation - Contact profile meters, system M
STAS 12561-1987 Geological investigation equipment JUMPERS FOR HOISTING EQUIPMENT Radii of contact'surfaces
STAS SR CEI 990-1995 Methods of measurement of touch-current and protective conductor current
STAS 13066-1992 Electron beam welded joints in steel. Quality classes
STAS SR ISO 1210:1993 Plastics. Determination of flammability characteristics of plastics in the form of small specimens in contact with a small flame
SR EN 729-4-1996 Quality requirements for welding. Fusion welding of metallic materials. Part 4: Elementary quality requirements
SR EN 729-2-1996 Quality requirements for welding. Fusion welding of metallic materials. Part 2: Comprehensive quality requirements
SR EN 729-3-1996 Quality requirements for welding. Fusion welding of metallic materials. Part 3: Standard quality requirements

Korean Agency for Technology and Standards (KATS), The mass of the contact plate

KS I ISO 15800-2005(2015) Soil quality－Characterization of soil with respect to human exposure
KS I ISO 15800:2021 Soil quality — Characterization of soil with respect to human exposure
KS C IEC 60601-2-9-2002(2012) Patient contact dosemeters used in radiotherapy with electrically connected radiation detectors
KS C IEC 60990:2003 Method of measurement of touch current and protective conductor current
KS B ISO 3834-2:2006 Quality requirements for fusion welding of metallic materials-Part 2:Comprehensive quality requirements
KS B ISO 3834-3:2006 Quality requirements for fusion welding of metallic materials-Part 3:Standard quality requirements
KS B ISO 3834-4:2006 Quality requirements for fusion welding of metallic materials-Part 4:Elementary quality requirements
KS B ISO 3834-2:2016 Quality requirements for fusion welding of metallic materials－Part 2：Comprehensive quality requirements
KS B ISO 3834-3:2016 Quality requirements for fusion welding of metallic materials－Part 3：Standard quality requirements
KS B ISO 3834-4:2016 Quality requirements for fusion welding of metallic materials－Part 4：Elementary quality requirements
KS M ISO 5989:2002 Photography－Pre－packaged chemicals for the processing of silver halide based photographic materials－Vocabulary
KS B ISO 17663:2008 Welding－Guidelines for quality requirements for heat treatment in connection with welding and allied processes
KS K 0853-2011 Test method for determination of nickel release from products intended to come into direct and prolonged contact with the skin:Alternate exposure
KS B ISO 10360-5-2014(2019) Geometrical product specifications(GPS) — Acceptance and reverification tests for coordinate measuring machines(CMM) — Part 5: CMMs using single and multiple stylus contacting probing systems
KS C IEC 61786-2008(2018) Measurement of low-frequency magnetic and electric fields with regard to exposure of human beings－Special requirements for instruments and guidance for measurements
KS B ISO 14554-1:2021 Quality requirement for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements
KS B ISO 14554-2:2021 Quality requirements for welding — Resistance welding of metallic materials — Part 2: Elementary quality requirements
KS B ISO 14554-1:2016 Quality requirement for welding - Resistance welding of metallic materials -Part 1 : Comprehensive quality requirements
KS B ISO 14554-2:2016 Quality requirements for welding - Resistance welding of metallic materials -Part 2 : Elementary quality requirements
KS B ISO 10042:2007 Arc-welded joints in aluminium and its weldable alloys-Guidance on quality levels for imperfections

KR-KS, The mass of the contact plate

KS I ISO 15800-2021 Soil quality — Characterization of soil with respect to human exposure
KS B ISO 14554-2-2016 Quality requirements for welding - Resistance welding of metallic materials -Part 2 : Elementary quality requirements
KS B ISO 14554-1-2016 Quality requirement for welding - Resistance welding of metallic materials -Part 1 : Comprehensive quality requirements
KS B ISO 14554-1-2021 Quality requirement for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements
KS B ISO 14554-2-2021 Quality requirements for welding — Resistance welding of metallic materials — Part 2: Elementary quality requirements

American Society for Testing and Materials (ASTM), The mass of the contact plate

ASTM B539-02(2008) Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM B539-02e1 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM B539-02 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM B539-02(2013) Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM B942-21 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
ASTM B942-05 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
ASTM B942-10 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
ASTM B942-10e1 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
ASTM B942-10(2015) Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
ASTM E2385-11(2016) Standard Guide for Estimating Wildlife Exposure Using Measures of Habitat Quality
ASTM B615-79(2017) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
ASTM B854-98(2010)e1 Standard Guide for Measuring Electrical Contact Intermittences
ASTM B854-98(2022) Standard Guide for Measuring Electrical Contact Intermittences
ASTM B615-79(2011) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
ASTM B615-79(2000) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
ASTM B615-79(2022) Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts
ASTM B854-98(2016) Standard Guide for Measuring Electrical Contact Intermittences
ASTM D7490-13 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
ASTM D7490-08 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
ASTM B539-96 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM B539-90 Standard Test Methods for Measuring Contact Resistance of Electrical Connections (Static Contacts)
ASTM B539-01 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM B539-18 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM B539-20 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
ASTM D7334-08 Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement
ASTM D6851-02(2011) Standard Test Method for Determination of Contact pH with Activated Carbon
ASTM B885-09(2020) Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
ASTM E2208-02 Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
ASTM E2208-02(2010) Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
ASTM E2208-02(2018)e1 Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
ASTM E2208-02(2010)e1 Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
ASTM F955-96 Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances
ASTM G174-04 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
ASTM G174-03 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
ASTM B712-93(1999) Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
ASTM G174-04(2009)e1 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
ASTM G174-22 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
ASTM F955-03 Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances
ASTM B712-93(2006) Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
ASTM E797-95 Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
ASTM B712-93(2012) Standard Guide for Determination of Sodium and Potassium Content For Silver-Cadmium Oxide Contact Materials
ASTM B667-97(2003)e1 Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
ASTM C813-20 Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
ASTM B667-97(2019) Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
ASTM B667-97(2014) Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
ASTM B667-97(2009) Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance
ASTM C813-90(1999) Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
ASTM C813-90(2004) Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
ASTM C813-90(2009) Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
ASTM F955-07 Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances
ASTM F955-07e1 Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances
ASTM F955-15 Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances
ASTM F955-15(2021) Standard Test Method for Evaluating Heat Transfer Through Materials for Protective Clothing Upon Contact with Molten Substances
ASTM D5946-99 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
ASTM D5946-01 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
ASTM D5946-17 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
ASTM G174-04(2017) Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
ASTM F1390-97 Standard Test Method for Measuring Warp on Silicon Wafers by Automated Noncontact Scanning

Anhui Provincial Standard of the People's Republic of China, The mass of the contact plate

DB34/T 2186-2014 Technical specification for quality control of liquor contact materials

Electronic Components, Assemblies and Materials Association, The mass of the contact plate

ECA 498B000-1988 Sectional Specification for Touch Stroke Switch Panels of Certified Quality
ECA EIA-364-69A-2002 TP-69A Inductance Measurement Test Procedure for Electrical Connectors and Sockets (10 nH - 100 nH)
ECA 498BAAA-1988 Detail Specification for Capability Approval of Metal Dome Contact Touch Stroke Switch Panels

Professional Standard - Electron, The mass of the contact plate

SJ/T 9554.3-1993 Grading standard of quality for vacuum switch tubes for contactors
SJ/T 11487-2015 Non-contact measurement method for the resistivity of semi-insulating semiconductor wafer

Group Standards of the People's Republic of China, The mass of the contact plate

T/SOOA 190004-2020 Service Quality Control Guideline for Contact Lenses Providers
T/HZAS 17-2021 Determination of the migration of hydrogenated terphenyls on silicone oil paper for food contact? Gas chromatography-mass spectrometry
T/HZAS 16-2021 Determination of the migration of diisopropylnaphthalene (DIPN) on silicone paper for food contact by gas chromatography-mass spectrometry
T/SAFCM 031-2021 Determination of Migration of 1- Hexene in Food Contact Materials and Products
T/SAFCM 034-2021 Determination of Migration ofIsophthalic Acidin Food Contact Materials and Products
T/GDBZ 002-2020 Determination of migration of 4,4'-biphenol in food contact materials and products
T/NAIA 30-2021 Determination of migration of isophthalic acid in food contact materials and products
T/YNZJ 001-2021 Determination of migration of isophthalic acid in food contact materials and products
T/GDAQI 004-2018 Food Safety Standard of food contact materials and products Determination of nonylphenol and its migration quantity

Association Francaise de Normalisation, The mass of the contact plate

NF Q03-093*NF EN 920:2000 Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract
NF EN 920:2000 Papiers et cartons destinés à entrer en contact avec les denrées alimentaires - Détermination de la teneur en matières sèches dans un extrait aqueux
NF C93-401-Ⅴ:1988 Two part multicontact connector with great number of contacts with pitch 2,54 mm - Type HE 17
NF F21-317*NF EN 50317:2013 Railway applications - Current collection systems - Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line
NF C70-300:2000 Methods of measurement of touch current and protective conductor current.
NF C70-300*NF EN 60990:2016 Methods of measurement of touch current and protective conductor current
NF C93-400-16-7*NF EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7 : mechanical tests on contacts and terminations - Test 16g : measurement of contact deformation after crimping
NF EN 60512-16-7:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-7 : essais mécaniques des contacts et des sorties - Essai 16g : mesure de la déformation d'un contact après sertissage
NF S31-084:2002 Acoustics - Method for measuring noise exposure levels in work environments.
NF EN 60990:2016 Méthodes de mesure du courant de contact et du courant dans le conducteur de protection
NF X50-720:2004 Quality of services - Recommendations for conceiving and improving the welcome - Guidelines.
NF ISO 13325:2019 Pneumatiques - Méthodes en roue libre pour le mesurage de l'émission acoustique issue du contact pneumatique/chaussée
NF A89-260-2*NF EN ISO 14554-2:2014 Quality requirements for welding - Resistance welding of metallic materials - Part 2 : elementary quality requirements
NF A89-260-1*NF EN ISO 14554-1:2014 Quality requirements for welding - Resistance welding of metallic materials - Part 1 : comprehensive quality requirements
NF EN ISO 18187:2018 Qualité du sol - Essai contact pour échantillons solides utilisant l'activité déshydrogénase de Arthrobacter globiformis
NF D25-101-14*NF EN 1186-14:2003 Materials and articles in contact with foodstuffs - Plastics - Part 14 : test methods for substitute tests for overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol.
NF EN 2349-202:2007 Série aérospatiale - Exigences et méthodes d'essais des relais et contacteurs - Partie 202 : examen des dimensions et masses
NF EN 60512-2-3:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 2-3 : essais de continuité électrique et de résistance de contact - Essai 2c : variation de la résistance de contact
NF H44-046*NF EN 14850:2006 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height
NF A89-250-2:2006 Quality requirements for fusion welding of metallic materials - Part 2 : comprehensive quality requirements.
NF A89-250-2*NF EN ISO 3834-2:2021 Quality requirements for fusion welding of metallic materials - Part 2 : comprehensive quality requirements
NF A89-801*NF EN 16296:2021 Imperfections in thermoplastics welded joints - Quality levels
NF T30-131-6*NF EN ISO 19403-6:2020 Paints and varnishes - Wettability - Part 6 : measurement of dynamic contact angle
NF EN ISO 19403-6:2020 Peintures et vernis - Mouillabilité - Partie 6 : mesurage de l'angle de contact dynamique
NF A89-250-2:1994 Quality requirements for welding. Fusion welding of metallic materials. Part 2 : comprehensive quality requirements.
NF A89-250-4:1994 Quality requirements for welding. Fusion welding of metallic materials. Part 4 : elementary quality requirements.
NF A89-250-3:1994 Quality requirements for welding. Fusion welding of metallic materials. Part 3 : standard quality requirements.
NF L58-100-202*NF EN 2349-202:2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 202 : examination of dimensions and mass
NF EN 60512-16-9:2008 Connecteurs pour équipements électroniques - Essais et mesures - Partie 16-9 : essais mécaniques des contacts et des sorties - Essai 16i : force de maintien du ressort de contact de mise à la masse
NF V37-012*NF ISO 2971:2013 Cigarettes and filter rods - Determination of nominal diameter - Method using a non-contact optical measuring apparatus
NF L10-314*NF EN 4875:2020 Aerospace series - Surface treatments - Test method for measurement of electrical contact resistance
NF EN 14850:2006 Récipients pour aérosols - Récipients métalliques avec ouverture de 25,4 mm - Mesurage de la hauteur de contact
NF EN 4875:2020 Série aérospatiale - Traitements de surface - Méthode d'essai de mesure de la résistance électrique de contact
XP CEN/TS 14577:2004 Matériaux et objets en contact avec les denrées alimentaires - Matières plastiques - Additifs polymériques - Méthode d'essai pour la détermination de la fraction massique d'un additif polymérique de masse moléculaire inférieure à 1000 daltons
NF A89-250-4:2006 Quality requirements for fusion welding of metallic materials - Part 4 : elementary quality requirements.
NF A89-250-4*NF EN ISO 3834-4:2021 Quality requirements for fusion welding of metallic materials - Part 4 : elementary quality requirements
NF C93-429:1986 Electronic components under quality assessment. Connecting devices. Multicontact board mounted connectors for printed boards with 2,24 mm spacing. Type he 11. General requirements.
NF EN 60512-2-2:2003 Connecteurs pour équipements électroniques - Essais et mesures - Partie 2-2 : essais de continuité électrique et de résistance de contact Essai 2b : résistance de contact - Méthode du courant d'essai spécifié
NF T30-117*NF EN 16105:2011 Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water
FD S94-468:2006 Surgical instruments - Guide and recommendations for the quality of water in contact with the reusable metallic surgical instruments
NF A89-232:2006 Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections.
NF A89-232*NF EN ISO 10042:2018 Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections
NF EN ISO 14554-1:2014 Exigences de qualité en soudage - Soudage par résistance des matériaux métalliques - Partie 1 : exigences de qualité complète
NF P98-216-2:1994 Test relating to pavements. Measurement of the macrotexture. Part 2 : method for measuring, without contact.
NF C93-400-16-9*NF EN 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9 : mechanical tests on contacts and terminations - Test 16i : grounding contact spring holding force

CU-NC, The mass of the contact plate

NC 32-25-1986 Color Industry. Indirect Printing Inks for Tinplate Vessels. Quality Specifications

Professional Standard - Machinery, The mass of the contact plate

JB/T 6954-2007 Quanity inspection and enaluation of grey castings hardened by contact-resistance-heating
JB/T 6954-1993 Quality inspection and rating of gray cast iron contact resistance heating quenching
JB/T 51146-1999 Product quality classification of single-row four-point contact ball type and single-row cross-roller type slewing bearings

TR-TSE, The mass of the contact plate

TS 2495-1977 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE ROUGHNESS BY THE PROF?LE METHOD - CONTACT (STYLUS) INSTRUMENTS OF CONSECUTIVE PROF?LE TRANSFORMATION - CONTACT PROF?LE METERS. SYSTEM M

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The mass of the contact plate

GB/T 15078-2008 Testing method for contact resistance of precious metals electrical contact materials
GB/T 15078-1994 Measuring method for contact resistance of precious metal electrical contact materials
GB/T 30693-2014 Measurement of water-contact angle of plastic films
GB/T 12113-1996 Methods of measurement of touch-current and protective conductor current
GB/T 12113-2023 Methods of measurement of touch current and protective conductor current
GB/T 12113-2003 Methods of measurement of touch current and protective conductor current
GB/T 19600-2004 Geometrical Product Specifications(GPS)Surface texture:Profile method-Calibration of contact(stylus)instruments
GB 12651-1990 Standard permissible limits of lead and cadmium release from ceramic ware in contact with food
GB 12651-2003 Standard permissible limits of lead and cadmium release from ceramic ware in contact with food
GB/T 6062-2002 Geometrical product specifications (GPS)--Surface texture:Profile method--Nominal characteristics of contact(stylus)instruments
GB/T 2407-2008 Plastics.Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
GB/T 32323-2015 Rolling bearings.Measuring methods for axial internal clearance of four-point-contact ball bearings
GB/T 12467.2-1998 Quality requirements for welding--Fusion welding of metallic materials--Part 2: Comprehensive quality requirements
GB/T 12467.3-1998 Quality requirements for welding--Fusion welding of metallic materials--Part 3: Standards quality requirements
GB/T 12467.4-1998 Quality requirements for welding--Fusion welding of metallic materials--Part 4: Elementary quality requirements
GB/T 23994-2009 Limit of certain harmful elements of coatings for consumer products contacting with human body

国家市场监督管理总局、中国国家标准化管理委员会, The mass of the contact plate

GB/T 15078-2021 Testing method for contact resistance of precious metals electrical contact materials
GB/T 40007-2021 Nanotechnology—Contacting methods for measuring the resistivity of nanomaterials—General rules

Society of Automotive Engineers (SAE), The mass of the contact plate

SAE AS31971-2003 GAGE PIN FOR SOCKET CONTACT ENGAGEMENT TEST
SAE AS31971A-2017 GAGE PIN FOR SOCKET CONTACT ENGAGEMENT TEST
SAE AS31971B-2020 GAGE PIN FOR SOCKET CONTACT ENGAGEMENT TEST

SAE - SAE International, The mass of the contact plate

SAE AS31971-1997 GAGE PIN FOR SOCKET CONTACT ENGAGEMENT TEST
SAE AS31971A-2007 GAGE PIN FOR SOCKET CONTACT ENGAGEMENT TEST

RU-GOST R, The mass of the contact plate

GOST 21342.1-1987 Variable resistors. Method for measuring transient resistance of switch contacts
GOST R 8.651-2009 State system for ensuring the uniformity of measurements. Contact (stylus) instruments for the measurement of surface roughness. Procedure of calibration
GOST R IEC 60990-2010 Metods of measurement of touch current and protective conductor current
GOST 24606.3-1982 Switching and mocenting components, and electrical connectors. Methods of measurement of contact resistance, and dynamic and static instability of contact transient resistance
GOST R 8.652-2009 State system for ensuring the uniformity of measurements. Contact (stylus) instruments for the measurement of surface roughness. Metrological characteristics of correct filters
GOST 14265-1979 Direct acting analogue contact electrical measuring instruments. General specifications
GOST EN 13130-4-2015 Materials and articles in contact with foodstuffs. Plastics. Substances subject to limitation. Part 4. Determination of 1,3-butadiene in plastics
GOST R 59399-2021 Imperfections in thermoplastics welded joints. Quality levels
GOST 33857-2016 Pipeline valves. Welding and quality control of welded joints. Technical requirements
GOST R ISO 10042-2009 Welding. Arc-welding joints in aluminium and its alloys. Quality levels for imperfections

Fujian Provincial Standard of the People's Republic of China, The mass of the contact plate

DB35/T 2126-2023 Quality management guidelines for food contact plastic product manufacturers

Electronic Components, Assemblies and Materials Association, The mass of the contact plate

ECA 700C000-1997 Sectional Specification for Circular Multicontact Connectors of Assessed Quality (for Frequencies Essentially Below 3 MHz)
ECA SP3703-1999 Detail Specification for High Density Tuning Fork Contacts and Components of Certified Quality Comment Period Expires: September 20, 1999; EIA-700D0AA

Association of German Mechanical Engineers, The mass of the contact plate

DVS 2929-2001
VDI/VDE/DGQ 2618 Blatt 13.2-2005 Inspection of measuring and test equipment - Test instruction for bore gauges with 2-point contact
DVS 0603-1986 Welding of cast-iron materials; quality assurance
DVS 3004-1977 Presentation of measures of quality assurance for the execution of welding work
DVS 0905-2-1979 Quality assurance of stud weld joints; stud welding with tip ignition
VDI 4443-2008 Contactless energy transfer for mobile systems of piece goods conveying

European Committee for Standardization (CEN), The mass of the contact plate

EN 920:2000 Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract
EN 920:1998 Paper and Board Intended to Come into Contact with Foodstuffs - Determination of Dry Matter Content in an Aqueous Extract
prEN ISO 18187 rev Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis
EN ISO 10340:1996 Optics and Optical Instruments - Contact Lenses - Method for Determining the Extractable Substances ISO 10340 : 1995
EN ISO 12179:2022 Geometrical product specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments (ISO 12179:2021)
EN ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Calibration of Contact (Stylus) Instruments
EN ISO 10339:1999 Ophthalmic Optics - Contact Lenses - Determination of Water Content of Hydrogel Lenses ISO 10339: 1997
EN ISO 14554-1:2013 Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements
EN ISO 14554-2:2013 Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements
EN ISO 3274:1997 Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Nominal Characteristics of Contact (Stylus) Instruments
EN 25817:1992 Arc-welded joints in steel; guidance on quality levels for imperfections (ISO 5817:1992)
EN 1811:2023 Reference test method for release of nickel from all post assemblies which are inserted into pierced parts of the human body and articles intended to come into direct and prolonged contact with the skin
EN 14850:2005 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height
prEN 729-2-1992 Quality systems for welding; fusion welding of metallic materials; part 2: complete quality system
prEN 729-3-1992 Quality systems for welding; fusion welding of metallic materials; part 3: standard quality system
prEN 729-4-1992 Quality systems for welding; fusion welding of metallic materials; part 4: elementary quality system
EN ISO 14554-1:2000 Quality Requirements for Welding - Resistance Welding of Metallic Materials - Part 1: Comprehensive Quality Requirements
EN ISO 14554-2:2000 Quality Requirements for Welding - Resistance Welding of Metallic Materials - Part 2: Elementary Quality Requirements ISO 14554-2:2000
EN 729-3:1994 Quality Requirements for Welding - Fusion Welding of Metallic Materials - Part 3: Standard Quality Requirements
PD CEN/TS 14577:2003 Materials and articles in contact with foodstuffs - Plastics; Polymeric additives - Test method for the determination of the mass fraction of a polymeric additive that lies below 1000 Daltons
EN 16105:2011 Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water
EN ISO 10042:2018 Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections
EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)

CEN - European Committee for Standardization, The mass of the contact plate

EN 920:1994 Paper and Board Intended to Come into Contact with Foodstuffs - Determination of Water- Soluble Matter
EN ISO 9337-2:2004 Contact lenses - Determination of back vertex power - Part 2: Measurement of contact lenses immersed in saline
EN ISO 18187:2018 Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis

Danish Standards Foundation, The mass of the contact plate

DS/EN 920:2001 Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract
DS/EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
DS/EN 60990:2000 Methods of measurement of touch current and protective conductor current
DS 895:1988 Quality control in welding production
DS/EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)
DS/EN 2349-202:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass
DS 896:1986 Quality control in welding production, when a general quality system is required
DS/EN 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force
DS/EN 60512-16-3:2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength
DS/EN 60512-16-18:2008 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation
DS/EN 16296:2013 Imperfections in thermoplastics welded joints - Quality levels
DS/EN 16296:2021 Imperfections in thermoplastics welded joints – Quality levels
DS/ENV 25 349:1993 Mechanical vibration - Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration
DS/EN 16105:2012 Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water
DS/EN 14850:2006 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height
DS/EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method
DS/EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments
DS/EN ISO 10042/AC:2006 Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections
DS/EN ISO 10042:2006 Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections
DS/EN ISO 14554-2:2000 Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements

Lithuanian Standards Office , The mass of the contact plate

LST EN 920-2001 Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract
LST EN 60512-16-7-2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (IEC 60512-16-7:2008)
LST EN 2349-202-2007 Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass
LST EN 60990-2002 Methods of measurement of touch current and protective conductor current (IEC 60990:1999)
LST EN 16296-2013 Imperfections in thermoplastics welded joints - Quality levels
LST EN 16296-2021 Imperfections in thermoplastics welded joints - Quality levels
LST EN 60512-16-5-2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts) (IEC 60512-16-5:2008)
LST EN 16105-2011 Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water
LST EN 14850-2006 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height
LST EN 60512-16-9-2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force (IEC 60512-16-9:2008)
LST EN 60512-16-3-2008 Connectors for electronic equipment - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-bending strength (IEC 60512-16-3:2008)
LST EN 60512-16-18-2008 Connectors for electronic equipment - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Deflection of contacts, simulation (IEC 60512-16-18:2008)

AENOR, The mass of the contact plate

UNE-EN 920:2001 Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract.
UNE 19062:1956 UNWELDED PIPE. QUALITY STANDARD.
UNE-EN 16296:2013 Imperfections in thermoplastics welded joints - Quality levels
UNE-EN 16105:2012 Paints and varnishes - Laboratory method for determination of release of substances from coatings in intermittent contact with water
UNE-EN 14850:2006 Aerosol containers - Metal containers with 25,4 mm aperture - Measurement of contact height
UNE-EN 60512-2-2:2004 Connectors for electronic equipment - Tests and measurements -- Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method

International Organization for Standardization (ISO), The mass of the contact plate

ISO 8321-1:2002 Ophthalmic optics - Specifications for material, optical and dimensional properties of contact lenses - Part 1: Rigid corneal and scleral contact lenses
ISO 9337-2:2004 Contact lenses - Determination of back vertex power - Part 2: Measurement of contact lenses immersed in saline
ISO 18187:2016 Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis
ISO 10340:1995 Optics and optical instruments - Contact lenses - Method for determining the extractable substances
ISO 12179:2000 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments
ISO 10339:1997 Ophthalmic optics - Contact lenses - Determination of water content of hydrogel lenses
ISO 14554-1:2013 Quality requirements for welding.Resistance welding of metallic materials.Part 1: Comprehensive quality requirements
ISO 14554-2:2013 Quality requirements for welding.Resistance welding of metallic materials.Part 2: Elementary quality requirements
ISO 14554-1:2000 Quality requirements for welding - Resistance welding of metallic materials - Part 1: Comprehensive quality requirements
ISO 14554-2:2000 Quality requirements for welding - Resistance welding of metallic materials - Part 2: Elementary quality requirements
ISO/CD 18187 Soil quality — Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis
ISO/DIS 18187:2023 Soil quality — Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis
ISO/TS 17865:2016 Geometrical product specifications (GPS) - Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems
ISO 6213:1989 Welding; factors to be considered to ensure quality in welded structures
ISO 181:1981 Plastics; Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
ISO 3274:1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments
ISO/CD 19403-6:2023 Paints and varnishes — Wettability — Part 6: Measurement of dynamic contact angle
ISO/DIS 19403-6:2023 Paints and varnishes — Wettability — Part 6: Measurement of dynamic contact angle
ISO 15989:2004 Plastics - Film and sheeting - Measurement of water-contact angle of corona-treated films
ISO 17663:2009 Welding - Quality requirements for heat treatment in connection with welding and allied processes
ISO 6213:1983 Welding — Items to be considered to ensure quality in welded structures
ISO/PAS 12835:2013 Qualification of casing connections for thermal wells
ISO/PAS 12868:2009 Geometrical product specification (GPS) - Coordinate measuring machines (CMM): Testing the performance of CMMs using single-stylus contacting probing systems
ISO 12179:2000/cor 1:2003 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Calibration of contact (stylus) instruments; Technical Corrigendum 1
ISO 3834-2:1994 Quality requirements for welding - Fusion welding of metallic materials - Part 2: Comprehensive quality requirements
ISO 3834-3:1994 Quality requirements for welding - Fusion welding of metallic materials - Part 3: Standards quality requirements
ISO 3834-4:1994 Quality requirements for welding - Fusion welding of metallic materials - Part 4: Elementary quality requirements

ECIA - Electronic Components Industry Association, The mass of the contact plate

700C000-1997 Sectional Specification for Circular Multicontact Connectors of Assessed Quality (for Frequencies Essentially Below 3 MHz)
498B000-1988 Sectional Specification for Touch Stroke Switch Panels of Certified Quality
EIA-364-69A-2002 TP-69A Low Level Induction Measurement for Electrical Contacts of Electrical Connectors
364-69-1989 TP-69 Low-Level Inductance Measurement for Electrical Contacts of Electrical Connectors
EIA/ECA-364-48A-2006 TP-48 Metallic Coating Thickness Measurements of Contacts Test Procedure for Electrical Connectors

CZ-CSN, The mass of the contact plate

CSN ISO 3274:1994 Instruments for the measurement of surface roughness by the profile method.Contact(stylus)instruments of consecutive profile transformation.Contact profile meters,system M
CSN 35 8071 Cast.14-1988 Variable resistors. Method of measurement of contact resistance of thc moving contact at low voltage level
CSN 26 9631-1988 Unit load and rack cell. Dimensional continuity of contact surfaces
CSN 35 4055 Cast.74-1987 Electromechanical components for electronic equipment. Gauge retention force (resilient contacts)
CSN ISO 1880:1993 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of progressive profile transformation. Profile recording instruments
CSN ISO 6213:1993 Welding. Factors to be considered to ensure quality in welded structures

PL-PKN, The mass of the contact plate

PN E85203-39-1991 Gauges for lampholders of the electric light sources Gauge for minimum contact force in lampholders Gi4
PN E85203-43-1991 Gauges for lampholders of electric light sources Gauge for minimum contact force in lampholder GX9,5
PN E85203-37-1991 Gauges for lampholders of the electric light sources Gauge ?E" for minimum contact force in lampholders G23
PN M69020-1974 Welding Quality classification of spot welds
PN E85203-30-1991 Gauges for lampholders of the electric light sources. Gauge for minimum contact force in lampholders G6,35; GX6,35 and GY6,35

International Electrotechnical Commission (IEC), The mass of the contact plate

IEC PAS 62246-2-1:2008 Reed contact units - Part 2-1: Heavy-duty reed switches - Quality assessment specification
IEC 60990:1999 Methods of measurement of touch current and protective conductor current
IEC TR 60990:1990 Methods of measurement of touch-current and protective conductor current
IEC 60990:2016 RLV Methods of measurement of touch current and protective conductor current
IEC 60990:2016 Methods of measurement of touch current and protective conductor current
IEC 62899-503-3:2021 Printed electronics - Part 503-3: Quality assessment - Measuring method of contact resistance for the printed thin film transistor - Transfer length method
IEC 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
IEC 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force

Inner Mongolia Provincial Standard of the People's Republic of China, The mass of the contact plate

DB15/T 639.2-2023 Optometry Optometry Quality and Technical Service Specifications Part 2: Soft Contact Lenses

Professional Standard - Commodity Inspection, The mass of the contact plate

SN/T 3939-2014 Food contact materials.Wood material.Determination of oxidizing residues in cork stoppers.Iodometric titration method
SN/T 2284-2009 Food contact materials.Polymer materials.Method for determination of overall migration.Substitute tests:Overall migration from plastics intended to come into contact with fatty foodstuffs using test media iso-octane and 95% ethanol
SN/T 2827-2011 Determination of sulfur dioxide in wooden materials of food contact materials for export
SN/T 3942-2014 Food contact materials.Paper and regenerated fiber materials.Determination of alkylphenols.Liquid chromatography-tandem mass spectrometry
SN/T 2898-2011 Food contact materials for export-Metal materials.Determination the migration of vinyl chloride in surface coat.Gas chromatography mass spectrometry
SN/T 2278-2009 Food contact materials.Determination of pentachlorophenol in woody materials.GC/MS method
SN/T 2830-2011 Determination of dry matter in water extracts of paper and board of food contact materials for export
SN/T 2828-2011 Gas chromatography-mass spectrometry for the dissolution determination of creosote from cork, a wooden material used in food contact materials for export
SN/T 3938-2014 Food contact materials.Polymers.Determination of organotin compounds.Gas chromatography-mass spectrometry
SN/T 2037-2007 Determination the migration of phthalates in plastic articles intended to come into contact with foodstuffs.GC/MS
SN/T 2001-2007 Determination of the migration of phthalate plasticizers in plastic molded articles in contact with food by gas chromatography-mass spectrometry
SN/T 4068-2014 Food contact materials.Regenerated cellulose film.Determination of solvent residue in coating.Headspace-gas chromatography-mass spectrometry
SN/T 3548-2013 Food contact materials.Polymer materials.Determination of phosphates plasticizer.Gas chromatography-mass spectrometry (GC-MS) method
SN/T 3481.1-2013 Food contact materials.Polymer materials.Determination of hexabromocyclododecane.Part 1:LC-MS/MS method

Hebei Provincial Standard of the People's Republic of China, The mass of the contact plate

DB13/T 5071-2019 Determination of 1,4-butanediol content in food contact paints and coatings by gas chromatography-mass spectrometry

YU-JUS, The mass of the contact plate

JUS Z.C8.021-1980 Plastics. Determination of behaviour ofrigid plastics in contact with an incandescent bar
JUS N.E3.023-1985 Plug gauge for lampholders E 14 with candle shaped shaft for candle lamps for testing contact making
JUS C.T3.010-1984 VVeldingandrelatedprocesses. Classes of quality of vvelding joints made hy steet melting

BE-NBN, The mass of the contact plate

NBN C 63-012-1973

AT-ON, The mass of the contact plate

ONORM M 7830-1985 Requirements for the quality of fusion welded joints on steel; Classification
ONORM M 7812-1-1996 Quality assurance of welding - Requirements for plants, performing welding Operations according to quality classes
ONORM M 7812 Beib.2-1996 Quality assurance of welding - Additional quality requirements according to ?NORM EN 729-2 to -4
OENORM EN 16296-2021 Imperfections in thermoplastics welded joints - Quality levels

AWS - American Welding Society, The mass of the contact plate

D8.8M-2007 Specification for Automotive Weld Quality—Arc Welding of Steel
D8.8M-2014 Specification for Automotive Weld Quality - Arc Welding of Steel

TH-TISI, The mass of the contact plate

TIS 2525-2011 Methods of measurement of touch current and protective conductor current
TIS 32-1985(en) CERAMIC WARE IN CONTACT WITH FOOD : PERMISSIBLE LIMITS AND METHOD OF TEST FOR LEAD AND CADMIUM

European Committee for Electrotechnical Standardization（CENELEC）, The mass of the contact plate

EN 60990:2016 Methods of measurement of touch current and protective conductor current
EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping
EN 60990:1999 Methods of Measurement of Touch Current and Protective Conductor Current
EN 60512-16-9:2008 Connectors for electronic equipment - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Grounding contact spring holding force

Standard Association of Australia （SAA）, The mass of the contact plate

AS IEC 60990:2018 Methods of measurement of touch current and protective conductor current
AS/NZS ISO 3834.2:1999 Quality requirements for welding - Fusion welding of metallic materials - Comprehensive quality requirements
AS/NZS ISO 3834.4:1999 Quality requirements for welding - Fusion welding of metallic materials - Elementary quality requirements
AS/NZS ISO 3834.3:1999 Quality requirements for welding - Fusion welding of metallic materials - Standards quality requirements
AS/NZS ISO 3834.2:2023 Quality requirements for welding - Fusion welding of metallic materials - Comprehensive quality requirements
AS 2763:1988 Vibration and shock - Hand-transmitted vibration - Guidelines for measurement and assessment of human exposure

ES-UNE, The mass of the contact plate

UNE-EN 60990:2016 Methods of measurement of touch current and protective conductor current (Endorsed by AENOR in October of 2016.)
UNE-EN 60512-16-7:2008 Connectors for electronic equipment - Tests and measurements -- Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after crimping (Endorsed by AENOR in February of 2009.)
UNE-EN ISO 18187:2018 Soil quality - Contact test for solid samples using the dehydrogenase activity of Arthrobacter globiformis (ISO 18187:2016) (Endorsed by Asociación Española de Normalización in April of 2018.)
UNE-EN 2349-202:2006 Aerospace series - Requirements and test procedures for relays and contactors - Part 202: Examination of dimensions and mass (Endorsed by AENOR in March of 2007.)
UNE-EN 16296:2022 Imperfections in thermoplastics welded joints - Quality levels
UNE-EN ISO 19403-6:2021 Paints and varnishes - Wettability - Part 6: Measurement of dynamic contact angle (ISO 19403-6:2017)
UNE-EN 4875:2020 Aerospace series - Surface treatments - Test method for measurement of electrical contact resistance (Endorsed by Asociación Española de Normalización in February of 2020.)
UNE-EN 60512-16-9:2008 Connectors for electronic equipment- Tests and measurements- Part 16-9: Mechanical tests on contacts and terminations- Test 16i:Grounding contact spring holding force (Endorsed by AENOR in November of 2008.)
UNE-EN ISO 10042:2018 Welding - Arc-welded joints in aluminium and its alloys - Quality levels for imperfections (ISO 10042:2018)

Japanese Industrial Standards Committee (JISC), The mass of the contact plate

JIS C 60990:2023 Methods of measurement of touch current and protective conductor current
JIS C 5402-16-7:2012 Connectors for electronic equipment -- Tests and measurements -- Part 16-7: Mechanical tests on contacts and terminations -- Test 16g: Measurement of contact deformation after crimping
JIS C 5402-16-6:2014 Connectors for electronic equipment -- Tests and measurements -- Part 16-6: Mechanical tests on contacts and terminations -- Test 16f: Robustness of terminations
JIS C 5402-16-9:2015 Connectors for electronic equipment -- Tests and measurements -- Part 16-9: Mechanical tests on contacts and terminations -- Test 16i: Grounding contact spring holding force
JIS C 5402-16-3:2014 Connectors for electronic equipment -- Tests and measurements -- Part 16-3: Mechanical tests on contacts and terminations -- Test 16c: Contact-bending strength
JIS Z 3400:1999 Quality requirements for welding -- Fusion welding of metallic materials
JIS B 0651 ERRATUM 2:2002 Geometrical Product Specification (GPS) -- Surface texture: Profile method -- Nominal characteristics of contact (stylus) instruments (Erratum 2)

IEC - International Electrotechnical Commission, The mass of the contact plate

PAS 62246-2-1-2008 Reed contact units – Part 2-1: Heavy-duty reed switches – Quality assessment specification (Edition 1.0)

Manufacturers Standardization Society of the Valve and Fitting Industry (MSS), The mass of the contact plate

MSS SP-112-2010 Quality Standard for Evaluation of Cast Surface Finishes Visual and Tactile Method

Professional Standard - Agriculture, The mass of the contact plate

GB 31604.57-2023 National Food Safety Standard Determination of Migration Amount of Benzophenones in Food Contact Materials and Products
GB/T 12468-1990 Welding quality assurance requirements for enterprises

NO-SN, The mass of the contact plate

NS 4930-1984 Principles for the measurement and the evaluation of human exposure to vibration transmitted to the hand

International Federation of Trucks and Engines, The mass of the contact plate

NAVISTAR TMS 9562-2012 Quality Requirements For Laser Welded Parts

ES-AENOR, The mass of the contact plate

UNE 82-314-1991 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of consecutive profile transformation. Contact profile meters, system M
UNE 19-011-1986

CENELEC - European Committee for Electrotechnical Standardization, The mass of the contact plate

EN 60512-16-5:2008 Connectors for electronic equipment - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge retention force (resilient contacts)

未注明发布机构, The mass of the contact plate

BS CECC 17001:1984(2000) Specification for Harmonized system of quality assessment for electronic components — Blank detail specification — Mercury wetted make contact units for general application
BS 7557:1992(2009) Specification for Limits of metal release from painted surfaces of articles, liable to come into contact with foodstuffs

Hunan Provincial Standard of the People's Republic of China, The mass of the contact plate

DB43/T 2649-2023 Determination of 1-hexene migration in food contact materials and products

FI-SFS, The mass of the contact plate

SFS-ISO 181 E:1986 This standard is approved in English
SFS 2225-1967

海关总署, The mass of the contact plate

SN/T 5323-2021 Determination of the migration amount of parabens in food contact materials, polymer materials, plastics, liquid chromatography-tandem mass spectrometry

CH-SNV, The mass of the contact plate

SNV 195 536-1970

ESDU - Engineering Sciences Data Unit, The mass of the contact plate

ESDU 85007 C-1994 Contact phenomena. III: calculation of individual stress components in concentrated elastic contacts under combined normal and tangential loading.

WRC - Welding Research Council, The mass of the contact plate

BULLETIN 516- 3D MODELING OF BOLTED FLANGED JOINTS AND DEVELOPMENT OF A TRANSDUCER FOR MEASURING GASKET CONTACT STRESS

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), The mass of the contact plate

ASHRAE 62.1 ERTA-2020 Ventilation for Acceptable Indoor Air Quality

American Welding Society (AWS), The mass of the contact plate

AWS WQAG-1997 Welding Quality Assurance Guideline for Fabricators
AWS D8.8M-2014 Specification for Automotive Weld Quality - Arc Welding of Steel
AWS D8.8M-2021 Specification for Automotive Weld Quality- Arc Welding of Steel
AWS D8.10M-2021 Specification for Automotive Weld Quality-Laser Beam Welding of Steel (1st Edition)

Indonesia Standards, The mass of the contact plate

SNI 07-3026-1992 Welding - Factors to be considered to ensure quality in welded structure

IT-UNI, The mass of the contact plate

UNI EN 16296-2021 Imperfections in thermoplastics welded joints - Quality levels

GM North America, The mass of the contact plate

GM VOL II SEC V-1973 Section V - Hexagon Bolts

IN-BIS, The mass of the contact plate

IS 9806-1981

North Atlantic Treaty Organization Standards Agency, The mass of the contact plate

STANAG 4107-2007 MUTUAL ACCEPTANCE OF GOVERNMENT QUALITY ASSURANCE AND USAGE OF THE ALLIED QUALITY ASSURANCE PUBLICATIONS (AQAP)

Professional Standard - Nuclear Industry, The mass of the contact plate

EJ/T 887-1994 Qualification of permanent connectors for grounding of nuclear power plants

ZA-SANS, The mass of the contact plate

SANS 10167:2004 The quality evaluation of fusion welded joints in steel structures

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, The mass of the contact plate

PREN 2349-202-2000 Aerospace Series Requirements and Test Procedures for Relays and Contactors Part 202: Examination of Dimensions and Mass (Edition P 1)

Underwriters Laboratories (UL), The mass of the contact plate

UL SUBJECT 116875-2010 OUTLINE OF INVESTIGATION FOR LEAD (Pb) CONTENT VERIFICATION OF PRODUCTS IN CONTACT WITH POTABLE WATER (Issue 1)

GOSTR, The mass of the contact plate

GOST R ISO 10360-5-2017 Geometrical product specifications. Acceptance and reverification tests for coordinate measuring machines. Сoordinate measuring machines using single and multiple stylus contacting systems

American Society of Mechanical Engineers (ASME), The mass of the contact plate

ASME SEC V B SE-797.2-2003 Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method ASTM E797-95 (R2001)