ZH
RU
ES

Use of reference electrodes

Use of reference electrodes, Total:100 items.

In the international standard classification, Use of reference electrodes involves: Analytical chemistry, Shipbuilding and marine structures in general, Surface treatment and coating, Solar energy engineering, Electronic tubes, Welding, brazing and soldering, Products of the chemical industry, Capacitors, Rubber, Powder metallurgy, Thermodynamics and temperature measurements, Electrical equipment for working in special conditions, Power transmission and distribution networks, Protection against electric shock, Earthworks. Excavations. Foundation construction. Underground works, Fuels, Telecommunication systems, Measurement of force, weight and pressure, Vacuum technology, Non-textile floor coverings, Soil quality. Pedology, Insulating fluids.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Use of reference electrodes

GB/T 27757-2011 Reference electrodes for the measurement of pH value
GB/T 7387-1999 Technical requirements for marine reference electrode
GB/T 7624-1987 2400 bits per second modem standardized for use on 4 wire leased telephone-type circuits

British Standards Institution (BSI), Use of reference electrodes

BS 2586:1979 Specification for glass and reference electrodes for the measurement of pH
BS ISO 12987:2004 Carbonaceous materials for the production of aluminium. Anodes, cathodes blocks, sidewall blocks and baked ramming pastes. Determination of the thermal conductivity using a comparative method
BS 6043-3.1.2:1999 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of anodes
BS 6043-3.1.1:1999 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Sampling. Sampling of cathodes
BS 6043-3.2:1997 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of density of cathode blocks and prebaked anodes
BS DD CEN/TS 15414-1:2010 Solid recovered fuels - Determination of moisture content using the oven dry method - Determination of total moisture by a reference method
BS 6043-3.6:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrodes. Determination of electrical resistivity of cathode blocks and prebaked anodes at ambient temperature
BS EN ISO 8166:2003 Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machine settings

未注明发布机构, Use of reference electrodes

BS 2586:1979(2012) Specification for Glass and reference electrodes for the measurement of pH
BS 7310:1990(2012) Specification for Ion - selective electrodes, reference electrodes, combination electrodes and ion - selective electrode meters for determination of ions in solution

National Association of Corrosion Engineers (NACE), Use of reference electrodes

NACE 11100-2000 Use of Reference Electrodes for Atmospherically Exposed Reinforced Concrete Structures (Item No. 24204)

American Society for Testing and Materials (ASTM), Use of reference electrodes

ASTM G220-20 Standard Practice for Replacing Saturated Calomel Reference Electrode (SCE) for Measuring Electrode Potentials
ASTM E948-15 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E948-05a Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
ASTM E1036-15 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
ASTM D4678-04(2009)e1 Standard Practice for RubberPreparation, Testing, Acceptance, Documentation, and Use of Reference Materials
ASTM E1502-98 Standard Guide for Use of Freezing-Point Cells for Reference Temperatures
ASTM G57-95a(2001) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM G57-95A Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM E2730-21 Standard Guide for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
ASTM E2730-22 Standard Guide for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
ASTM E2730-10(2015)e1 Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
ASTM E2730-10 Standard Practice for Calibration and Use of Thermocouple Reference Junction Probes in Evaluation of Electronic Reference Junction Compensation Circuits
ASTM G57-06(2012) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM E1125-05 Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
ASTM D7330-22 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
ASTM G187-05 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM G187-12 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM G187-12a Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM D877/D877M-13 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes

GOSTR, Use of reference electrodes

GOST 8.663-2018 State system for ensuring the uniformity of measurements. Reference electrodes for electrochemical measurements. Verification procedure

RU-GOST R, Use of reference electrodes

GOST 21107.13-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for pulsed thyratrons and gas-filled rectifiers
GOST 21107.10-1978 Gas discharge devices. Methods of measurement of electrical parameters of operating and measuring conditions for glow-discharge thyratrons and gas-filled rectifiers
GOST R ISO 12987-2014 Carbonaceous materials for the production of aluminium. Anodes, cathodes blocks, sidewall blocks and baked ramming pastes. Determination of the thermal conductivity using a comparative method

AWS - American Welding Society, Use of reference electrodes

FGW APP A-1979 Table A1 (Electrodes Used in Part II)

Japanese Industrial Standards Committee (JISC), Use of reference electrodes

JIS B 7960-1:2022 Hydrogen ion meters using glass electrodes -- Measuring instruments used in transaction or certification -- Part 1: Glass electrodes
JIS B 7960-1:2015 Hydrogen ion meters using glass electrodes -- Measuring instruments used in transaction or certifications -- Part 1: Glass electrodes

Association of German Mechanical Engineers, Use of reference electrodes

Association Francaise de Normalisation, Use of reference electrodes

NF EN ISO 9312:2013 Équipement de soudage par résistance - Fiches isolées utilisées dans les contre-électrodes
NF ISO 6375:1986 Produits carbonés utilisés pour la production de l'aluminium - Cokes pour électrodes - Échantillonnage.
NF ISO 6999:1986 Produits carbonés utilisés pour la production de l'aluminium - Brai pour électrodes - Détermination de la masse volumique - Méthode pycnométrique.
NF ISO 6376:1986 Produits carbonés utilisés pour la production de l'aluminium - Brai pour électrodes - Détermination du taux des matières insolubles dans le toluène.
NF ISO 6791:1986 Produits carbonés utilisés pour la production de l'aluminium - Brai pour électrodes - Détermination du taux de matières insolubles dans la quinoleine.
NF ISO 23812:2009 Analyse chimique des surfaces - Spectrométrie de masse des ions secondaires - Méthode pour l'étalonnage de la profondeur pour le silicium à l'aide de matériaux de référence à couches delta multiples

American Welding Society (AWS), Use of reference electrodes

AWS FGW APP A-1979 Table A1 (Electrodes Used in Part II)

ATIS - Alliance for Telecommunications Industry Solutions, Use of reference electrodes

T1.TR.74-2001 Objective Video Quality Measurement Using a Peak- Signal-to-Noise-Ratio (PSNR) Full Reference Technique
T1.514-1995 Telecommunications - Network Performance Parameters and Objectives for Dedicated Digital Services - SONET Bit Rates

Korean Agency for Technology and Standards (KATS), Use of reference electrodes

KS M ISO 12987:2010 Carbonaceous material for the production of aluminium－Anodes,cathodes blocks, sidewall blocks and baked ramming pastes－Determination of the thermal conductivity using a comparative method
KS M ISO 6999:2003 Carbonaceous materials for the production of aluminium-Pitch for electrodes-Determination of density-Pyknometric method
KS B 6514-1991(2011) Rules of electronic amplifier for electro-hydraulic control valves
KS C 6421-2002 FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE IN ELECTRONIC EQUIPMENT
KS C 6421-1982 FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE IN ELECTRONIC EQUIPMENT
KS M ISO 12979-2004(2019) Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of C/H ratio in the quinoline-insoluble fraction
KS M ISO 12979:2004 Carbonaceous materials used in the production of aluminium－Pitch for electrodes－Determination of C/H ratio in the quinoline-insoluble fraction
KS C IEC 61481-1-2016(2021) Live working — Phase comparators — Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.

International Organization for Standardization (ISO), Use of reference electrodes

ISO 12987:2004 Carbonaceous materials for the production of aluminium - Anodes, cathodes blocks, sidewall blocks and baked ramming pastes - Determination of the thermal conductivity using a comparative method
ISO 6999:1983 Carbonaceous materials for the production of aluminium; Pitch for electrodes; Determination of density; Pycnometric method
ISO 12979:1999 Carbonaceous materials used in the production of aluminium - Pitch for electrodes - Determination of C/H ratio in the quinoline-insoluble fraction
ISO/CD 11713:2023 Carbonaceous materials used in the production of aluminium — Cathode blocks and baked anodes — Determination of electrical resistivity at ambient temperature

BE-NBN, Use of reference electrodes

NBN T 03-484-1985 Carbonaceous materials for the production of aluminium - Pitch for electrodes-Determination of density-Pyknometric method
NBN F 42-001-1986

Military Standard of the People's Republic of China-General Armament Department, Use of reference electrodes

GJB 389.2-1987 Comparative testing of modems used on telephone type circuits
GJB 146.9-1987 9600 bit/second modem for use on four-wire point-to-point dedicated telephone type circuits
GJB 146.1-1986 1200/600 bit/second modem used on ordinary switched telephone networks
GJB 146.2-1986 2400/1200 bit/second modem used on ordinary switched telephone networks
GJB 146.3-1986 4800/2400 bit/second modem used on ordinary switched telephone networks

Professional Standard - Non-ferrous Metal, Use of reference electrodes

YS/T 484-2005 Method for measuring the discharge capacity of the hydrogen storage alloys as the negative electrode of the metal hydride-nickel battery

International Telecommunication Union (ITU), Use of reference electrodes

ITU-T V.26 FRENCH-1988 2400 BITS PER SECOND MODEM STANDARDIZED FOR USE ON 4-WIRE LEASED TELEPHONE-TYPE CIRCUITS
ITU-T V.26 SPANISH-1988 2400 BITS PER SECOND MODEM STANDARDIZED FOR USE ON 4-WIRE LEASED TELEPHONE-TYPE CIRCUITS
ITU-R S.522-5 SPANISH-1994 ALLOWABLE BIT-ERROR RATIOS AT THE OUTPUT OF THE HYPOTHETICAL REFERENCE DIGITAL PATH FOR SYSTEMS IN THE FIXED-SATELLITE SERVICE USING PULSE-CODE MODULATION FOR TELEPHONY
ITU-T V.26 BIS FRENCH-1988 2400/1200 BITS PER SECOND MODEM STANDARDIZED FOR USE IN THE GENERAL SWITCHED TELEPHONE NETWORK
ITU-T V.26 BIS SPANISH-1988 2400/1200 BITS PER SECOND MODEM STANDARDIZED FOR USE IN THE GENERAL SWITCHED TELEPHONE NETWORK
ITU-R BT.1199-1 FRENCH-2010 Use of Bit-Rate Reduction in the HDTV Studio Environment
ITU-R BT.1199-1 SPANISH-2010 Use of bit-rate reduction in the HDTV studio environment
ITU-R BT.1199-1995 Use of Bit-Rate Reduction in the HDTV Studio Environment
ITU-R BT.1729 FRENCH-2005 Common 16 × 9/4 × 3 aspect ratio digital television reference test pattern
ITU-R BT.1729 SPANISH-2005 Common 16 × 9/4 × 3 aspect ratio digital television reference test pattern
ITU-T X.511-2008 Information technology – Open Systems Interconnection – The Directory: Abstract service definition
ITU-T X.51-1988 FUNDAMENTAL PARAMETERS OF A MULTIPLEXING SCHEME FOR THE INTERNATIONAL INTERFACE BETWEEN SYNCHRONOUS DATA NETWORKS USING 10-bit ENVELOPE STRUCTURE
ITU-T X.51 BIS-1988 FUNDAMENTAL PARAMETERS OF A 48-kbit/s USER DATA SIGNALLING RATE TRANSMISSION SCHEME FOR THE INTERNATIONAL INTERFACE BETWEEN SYNCHRONOUS DATA NETWORKS USING 10-bit ENVELOPE STRUCTURE
ITU-R QUESTION 4-2/6-2004 Planning parameters for digital television broadcasting using terrestrial channels
ITU-R BT.1199-1-2010 Use of bit-rate reduction in the HDTV studio environment
ITU-R QUESTION 4-26-2004 Planning parameters for digital television broadcasting using terrestrial channels

Society of Motion Picture and Television Engineers (SMPTE), Use of reference electrodes

SMPTE RDD 6-2008 for Television - Description and Guide to the Use of the Dolby? E Audio Metadata Serial Bitstream
SMPTE RDD 19-2011 Television - Guidelines on the Use of Dolby E with Video Signals at Frame Rates Greater than 30 Hz

International Electrotechnical Commission (IEC), Use of reference electrodes

IEC 61481/COR1:2002 Live working - Portable phase comparators for use on voltages from 1 kV to 36 kV a.c.; Corrigendum 1

BELST, Use of reference electrodes

STB 1048-97 Comparative electrodes for determination of hydrogen ions activity in aqueous solutions. General technical specifications

AASHTO - American Association of State Highway and Transportation Officials, Use of reference electrodes

T 373M/T 373-2017 Standard Method of Test for Comparative Qualitative Corrosion Characterization of Steel Bars Used for Concrete Reinforcement (Linear Polarization Resistance and Potentiodynamic Polarization Tests)

German Institute for Standardization, Use of reference electrodes

DIN EN ISO 8166:2003 Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machine settings (ISO 8166:2003); German version EN ISO 8166:2003
DIN EN 50406-1:2005-02 End user multi-pair cables used in high bit rate telecommunication networks - Part 1: Aerial cables; German version EN 50406-1:2004
DIN 28418-2:1978 Vakuum technology; standard method for vacuum gauge calibration by direct comparison with a reference vaccum gauge, ionization vacuum gauge

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Use of reference electrodes

QUESTION 4-2/6-2004 Planning parameters for digital television broadcasting using terrestrial channels
ITU-R TF.582-1-1990 Time and Frequency Reference Signal Dissemination and Coordination Using Satellite Methods - Section 7C - Systems for Dissemination and Comparison

Danish Standards Foundation, Use of reference electrodes

DS/EN ISO 8166:2003 Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machines settings

ES-UNE, Use of reference electrodes

UNE-EN 50406-1:2004 End user multi-pair cables used in high bit rate telecommunication networks -- Part 1: Aerial cables (Endorsed by AENOR in September of 2004.)

Standard Association of Australia （SAA）, Use of reference electrodes

AS 1289.5.4.3:2006 Methods of testing soils for engineering purposes - Soil compaction and density tests - Compaction control test - Dry density ratio and moisture ratio using statistical selection of reference values