ZH
RU
ES
Graphite fine particle size
Graphite fine particle size, Total:82 items.
In the international standard classification, Graphite fine particle size involves: Conducting materials, Non-metalliferous minerals, Paint ingredients, Particle size analysis. Sieving, Ceramics, Products of the chemical industry, Metalliferous minerals, Road engineering, Insulating fluids, Analytical chemistry, Paints and varnishes, Cutting tools, Test conditions and procedures in general, Construction materials, Air quality, Testing of metals, Materials and components for railway engineering, Materials for the reinforcement of composites, Earthworks. Excavations. Foundation construction. Underground works.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Graphite fine particle size
RU-GOST R, Graphite fine particle size
- GOST 17818.2-1990 Graphite. Method for determination of granulometric composition
- GOST 32518.2-2013 Iron ores, concentrates, agglomerates and pellets. Determination of silica spectrophotometric method
RO-ASRO, Graphite fine particle size
- STAS 1314/17-1975 MANGANESE ORES AND CONCENTRATES Determination of grain size (fineness)
Professional Standard - Chemical Industry, Graphite fine particle size
International Organization for Standardization (ISO), Graphite fine particle size
- ISO 13320:2009 Particle size analysis - Laser diffraction methods
- ISO 4700:1983 Iron ore pellets; Determination of crushing strength
- ISO/TR 24857:2006 Synthetic industrial diamond grit products - Single-particle compressive failure strength - "DiaTest-SI" system
- ISO 18591:2015 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of compressive strength of ceramic granules
VN-TCVN, Graphite fine particle size
- TCVN 5352-1991 Graphite.Method for the determination of granulometric composition
Occupational Health Standard of the People's Republic of China, Graphite fine particle size
- GBZ/T 192.6-2018 Determination of dust in the air of workplaces - Part 6: Ultrafine particles and total fine particle concentration
Korean Agency for Technology and Standards (KATS), Graphite fine particle size
- KS L ISO 14703:2001 Fine ceramics(advanced ceramics, advanced technical ceramics)-Sample preparation for the determination of particle size distribution of ceramic powders
- KS L ISO 14703:2016 Fine ceramics(advanced ceramics, advanced technical ceramics)－Sample preparation for the determination of particle size distribution of ceramic powders
- KS L 1623-2012(2022) Testing method for compressive strength of fine ceramic granules
- KS E ISO 4700:2010 Iron ore pellets for blast furnace and direct reduction feedstocks-Determination of the crushing strength
- KS E ISO 4700:2017 Iron ore pellets for blast furnace and direct reduction feedstocks－Determination of the crushing strength
- KS L 1623-2012 Testing method for compressive strength of fine ceramic granules
- KS L 1623-2012(2017) Testing method for compressive strength of fine ceramic granules
- KS L 1614-2001 Determination of particle size distributions for fine ceramic raw powders by laser diffraction method
- KS F 2529-2017(2022) Methods of test for particle density and water absorption of light weight fine aggregates for structural concrete
- KS F 2529-2017 Methods of test for particle density and water absorption of light weight fine aggregates for structural concrete
- KS L 1618-2-2008 Fine ceramics(advanced ceramics, advanced technical ceramics)-Test methods of properties of ceramic granules-Part 2:Bulk density
- KS L 1618-2-2013 Fine ceramics(advanced ceramics, advanced technical ceramics)－Test methods of properties of ceramic granules－Part 2：Bulk density
Institute of Environmental Sciences and Technology, Graphite fine particle size
未注明发布机构, Graphite fine particle size
- DIN EN ISO 1524:2002 Coating materials and printing inks Determination of grinding fineness (graininess)
Japanese Industrial Standards Committee (JISC), Graphite fine particle size
- JIS M 8718:2000 Iron ore pellets -- Determination of crushing strength
- JIS M 8718:2009 Iron ore pellets -- Determination of crushing strength
- JIS R 1620:1995 Testing methods for particle density of fine ceramic powder
- JIS M 8718:1993 Iron ore pellets -- Determination of crushing strength
- JIS R 1639-5:2007 Test methods of properties of fine ceramic granules Part 5: Compressive strength of a single granule
- JIS R 1619:1995 Testing method for size distribution of fine ceramic particles by liquid photosedimentation method
- JIS R 1639-2:1999 Test methods of properties of fine ceramic granules Part 2: Bulk density
- JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
- JIS A 1134:1999 Methods of test for particle density and water absorption of light weight fine aggregates for structural concrete
- JIS A 1134:2006 Methods of test for particle density and water absorption of lightweight fine aggregates for structural concrete
US-FCR, Graphite fine particle size
British Standards Institution (BSI), Graphite fine particle size
- BS 6599:1985 Method for determination of crushing strength of iron ore pellets
- BS EN 17289-3:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. Sedimentation method
- BS EN 17289-2:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. Calculation method
- BS ISO 18591:2015 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of compressive strength of ceramic granules
- BS EN 17289-1:2020 Characterization of bulk materials. Determination of a size-weighted fine fraction and crystalline silica content. General information and choice of test methods
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Graphite fine particle size
- GB/T 13531.6-2018 General methods on determination of cosmetics—Determination of partical size
Standard Association of Australia （SAA）, Graphite fine particle size
- AS 2891.11:2005 Methods of sampling and testing asphalt - Degree of particle coating
- AS 1141.5:2000 Methods for sampling and testing aggregates - Particle density and water absorption of fine aggregate
- AS 1141.5:1996 Methods for sampling and testing aggregates Method 5: Particle density and water absorption of fine aggregate
Shandong Provincial Standard of the People's Republic of China, Graphite fine particle size
- DB37/T 3460-2018 Determination of Copper in Waste Gas Particulates from Stationary Pollution Sources in Shandong Province Graphite Furnace Atomic Absorption Spectrophotometry
American Society for Testing and Materials (ASTM), Graphite fine particle size
- ASTM D4781-03 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM D4781-03(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles
- ASTM E382-12 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
- ASTM E382-07 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets
- ASTM D4512-99 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM D4512-03 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM D4512-03(2008) Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM D4512-03(2013) Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM D4512-03(2013)e1 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM C1252-03 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
- ASTM C1252-06 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
- ASTM C1252-98 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
- ASTM D4512-22 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
- ASTM D4512-03(2018)e1 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder
German Institute for Standardization, Graphite fine particle size
- DIN-Fachbericht ISO/TR 24857:2007 Synthetic industrial diamond grit products - Single-particle compressive failure strength - "DiaTest-SI" system
- DIN EN 933-9:1998 Tests for geometrical properties of aggregates - Part 9: Assessment of fines; methylene blue test; German version EN 933-9:1998
- DIN 18124:1997 Soil, investigation and testing - Determination of density of solid particles - Capillary pyknometer, wide mouth pycnometer
- DIN EN 933-7:1998 Tests for geometrical properties of aggregates - Part 7: Determination of shell content; percentage of shells in coarse aggregates; German version EN 933-7:1998
- DIN EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids; German version EN 1097-3:1998
- DIN 18124:2011 Soil, investigation and testing - Determination of density of solid particles - Capillary pyknometer, wide mouth pycnometer, gas pycnometer
Professional Standard - Geology, Graphite fine particle size
- DZ/T 0276.3-2015 Regulation for testing the physical and mechanical properties of rock.Part 3:Test for determining the grain density of rock
Association of German Mechanical Engineers, Graphite fine particle size
- VDI 2268 Blatt 4-1990 Chemical analysis of particulate matter; determination of arsenic, antimony and selenium in dust emissions by graphite-furnace atomic absorption spectrometry
- VDI 3861 Blatt 1-1989 Measurement of fibrous particles; manual measurement of asbestos in flowing clean exhaust gas; determination of asbestos mass concentration by IR-spectroscopy
Group Standards of the People's Republic of China, Graphite fine particle size
- T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
- T/BSPT 003-2020 Powder Technology—Performance test method for fine particulate matter （PM2.5）mass concentration measurement instruments based on light scattering principle
Professional Standard - Railway, Graphite fine particle size
Association Francaise de Normalisation, Graphite fine particle size
- NF X43-133*NF EN ISO 28439:2011 Workplace atmospheres - Characterization of ultrafine aerosols/nanoaerosols - Determination of the size distribution and number concentration using differential mobility analysing systems.
Hebei Provincial Standard of the People's Republic of China, Graphite fine particle size
- DB13/T 5026.2-2019 Determination of physical properties of graphene conductive paste Part 2: Determination of paste fineness by scraper fineness meter method
HU-MSZT, Graphite fine particle size
BR-ABNT, Graphite fine particle size
API - American Petroleum Institute, Graphite fine particle size
- API PUBL 4704-2001 Gas Fired Heater - Test Report Site B Characterization of Fine Particulate Emission Factors and Specification Profiles from Stationary Petroleum Industry Combustion Sources