ZH
RU
ES

New chemical fiber

New chemical fiber, Total:236 items.

In the international standard classification, New chemical fiber involves: Furniture, Characteristics and design of machines, apparatus, equipment, Applications of information technology, Air quality, Electric road vehicles, Products of the textile industry, Fibre optic communications, Power transmission and distribution networks, Installations in buildings, SOCIOLOGY. SERVICES. COMPANY ORGANIZATION AND MANAGEMENT. ADMINISTRATION. TRANSPORT, Products of the chemical industry, Rubber and plastics products, Construction materials, Vocabularies, Company organization and management, Standardization. General rules, Insulating materials, Electricity. Magnetism. Electrical and magnetic measurements, Analytical chemistry, Rubber, Medical sciences and health care facilities in general, Occupational safety. Industrial hygiene, Inorganic chemicals, Valves, Electrical engineering in general, Road engineering, Reinforced plastics, Textile fibres, Hospital equipment, Medical equipment, Leather technology, Services, On-board equipment and instruments, Power stations in general, Solar energy engineering, Wind turbine systems and other alternative sources of energy, Rotating machinery, Agricultural machines, implements and equipment, Plastics, Pipeline components and pipelines.

Group Standards of the People's Republic of China, New chemical fiber

T/ZZB 2460-2021 Outdoor air clean ventilator for sterilization 2021
T/QGCML 974-2023 New Cosmetic Processing and Grinding Device
T/AIITRE 20001-2021 Digital transformation—Guidance for enhanced capability system construction
T/QGCML 1831-2023
T/ZAMA 1003-2023 Design and testing specifications for new lightweight materials for new energy vehicles
T/DLDTA 001-2023 Guidelines for the new digitization of offshore trade regulation
T/CEC 103-2016 New urbanization distribution network development evaluation specification
T/QGCML 1311-2023 Low energy consumption intelligent central fresh air purification system
T/SSS C001-2023 Guidelines for construction during urban renewal towards digital transformation
T/AIITRE 10003-2021 Integration of informatization and industrialization management systems—Enhanced capability grading requirements
T/SCIIA 1-2020 Digital Transformation Specification for Evaluation of New Infrastructure Construction Products and Services
T/CADERM 3044-2020 Guidelines for the regular epidemic prevention and control of COVID-19 on campus
T/CIEP 0021-2020 Non-ionic cellulose ether by-product industrial sodium chloride
T/WZBF 012-2022 High pressure ultra-high temperature bellow pretighten special new type ball valve for large scale petrochemical plant
T/CEC 132-2017 Technical specification for evaluating the effectiveness of new urbanization distribution network construction and transformation
T/CNTAC 91-2022 Smart factory of chemical filament weaving with water jet loom — Information model of digital unit
T/ZSA 41-2020 Specifications for Coronavirus disease (COVID-19) prevention and control in blood purification facilities
T/NBPIA 004-2020 Specifications for Coronavirus disease (COVID-19) prevention and control in blood purification facilities
T/STM 002-2023 Evaluation specification for the construction of new types of R&D institutions in the Demonstration Zone of Green and Integrated Ecological Development of the Yangtze River Delta
T/CAB 0290-2023 Artificial atmosphere comfort products Part 12: Air conditioning (heat pump) unit with fresh air and air purification function
T/YLNK 5-2020 "Yangling Agricultural Science" Agricultural Science and Technology Innovation XNSF-1 Intelligent Water and Fertilizer Integrated System Technical Specifications
T/SHRH 031-2020 Anti-wrinkly and Firming Lifting Efficacy Test of Cosmetics - In vitro test Method of Collagen I Contents with fibroblasts

US-CLSI, New chemical fiber

CLSI I/LA35-A-2011 Neweborn Screening for Cystic Fibrosis; Approved Guideline

Professional Standard - Commodity Inspection, New chemical fiber

SN/T 1690.1-2005 Test method of qualitative and quantitative analysis for new kind of textile fibers--Part 1: Soybean protein fiber
SN/T 1690.2-2013 Analysis of new type textile fibre component.Part 2:PTT,PBT fiber.The nuclear magentic resonance spectroscopy method

CN-STDBOOK, New chemical fiber

图书 3-9509 QFD innovative quality control circle--a new model of satisfaction perception realization and systematic innovation

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., New chemical fiber

ASHRAE SF-98-16-1998 Symposium on New Learning in System Chemistry for New Refrigerants and Lubricants
ASHRAE PH-97-4-4-1997 Implementation of a New Pattern Recognition Adaptive Controller Developed Through Optimization
ASHRAE HI-02-1-3-2002 Performance of Finned Coil Condensers Optimized for New HFC Refrigerants
ASHRAE 4168-1998 The Knitted Metal Fiber Burner: A New Generation of Surface Combustion Material for Radiant Heat and Low NOx Applications

Shaanxi Provincial Standard of the People's Republic of China, New chemical fiber

DB61/T 1505-2021 Technical Specifications for New Capability Identification of Digitally Transformed Enterprises
DB61/T 1506-2021 Implementation Guide for Identifying New Capabilities in Digitally Transformed Enterprises

Shandong Provincial Standard of the People's Republic of China, New chemical fiber

DB37/T 3468-2018 Guidelines for the Construction and Acceptance of New Urbanization Standardization Pilot Projects

German Institute for Standardization, New chemical fiber

DIN 7737:1959 Laminated Products; Vulcanized Fibre, Types
DIN 7737:1959-09 Laminated Products; Vulcanized Fibre, Types
DIN EN 14721:2007-12 Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete; German version EN 14721:2005+A1:2007
DIN EN 14721:2007 Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete (includes Amendment A1:2007); English version of DIN EN 14721:2007-12
DIN EN 60450:2008 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (IEC 60450:2004 + A1:2007); German version EN 60450:2004 + A1:2007
DIN EN ISO 1833-22:2021-10 Textiles - Quantitative chemical analysis - Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride) (ISO 1833-22:2020); German version EN ISO 1833-22:2021
DIN EN 1170-8:2009-05 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test; German version EN 1170-8:2008
DIN EN ISO 1833-6:2011 Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) (ISO 1833-6:2007); German version EN ISO 1833-6:2010
DIN EN 61754-4-1:2003 Fibre optic connector interfaces - Part 4-1: Type SC connector family; Simplified receptacle SC-PC connector interfaces (IEC 61754-4-1:2003); German version EN 61754-4-1:2003
DIN EN 61754-4-100:2016-09 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4-100: Type SC connector family - Simplified receptacle SC-PC connector interfaces (IEC 61754-4-100:2015); German version EN 61754-4-100:2016 / Note: D...
DIN EN 61754-6-100:2016-09 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6-100: Type MU connector family - Simplified receptacle MU-PC connector interfaces (IEC 61754-6-100:2015); German version EN 61754-6-100:2016 / Note: D...
DIN EN 50377-4-2:2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule categ
DIN EN ISO 1833-6:2019-07 Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose, certain types of cupro, modal or lyocell with certain other fibres (method using formic acid and zinc chloride) (ISO 1833-6:2018); German version EN ISO 1833-6:2019
DIN EN 50377-4-2:2011-10 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule c...

Professional Standard - Textile, New chemical fiber

FZ 71003-1991 Combed wool type chemical fiber knitting wool
FZ/T 73005-1991 Combed wool chemical fiber knitwear
FZ 73005-1991 Combed wool chemical fiber knitwear

工业和信息化部, New chemical fiber

YD/T 3025-2016 Miniaturized Erbium-Doped Fiber Amplifier

Association Francaise de Normalisation, New chemical fiber

NF EN 14721+A1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la teneur en fibres du béton frais ou durci
NF EN 14721/IN1:2007 Méthode d'essai du béton de fibres métalliques - Mesurage de la teneur en fibres du béton frais ou durci
NF C26-270/A1*NF EN 60450/A1:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
NF P19-213*NF EN 14721+A1:2007 Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete
NF P19-213/IN1*NF EN 14721/IN1:2007 Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete
NF C26-270*NF EN 60450:2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
NF EN 60450/A1:2007 Mesure du degré de polymérisation moyen viscométrique des matériaux isolants cellulosiques neufs et vieillis à usage électrique
NF EN 60450:2004 Mesure du degré de polymérisation moyen viscométrique des matériaux isolants cellulosiques neufs et vieillis à usage électrique
NF EN ISO 1833-22:2021 Textiles - Analyse chimique quantitative - Partie 22 : mélanges de viscose ou de certains types de cupro, modal ou lyocell avec des fibres de lin (méthode à l'acide formique et au chlorure de zinc)
NF T57-511:2011 Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area.
NF P19-829-8*NF EN 1170-8:2008 Test method for glass-fibre reinforced cement - Part 8 : cyclic weathering type test
NF T57-153-11*NF ISO 1268-11:2006 Fibre-reinforced plastics - Methods of producing test plates - Part 11 : injection moulding of BMC and other long-fibre moulding compounds - Small plates.
NF EN ISO 1833-6:2019 Textiles - Analyse chimique quantitative - Partie 6 : mélanges de viscose, certains types de cupro, modal ou lyocell avec certaines autres fibres (méthode à l'acide formique et au chlorure de zinc)
NF C93-910-4-100*NF EN 61754-4-100:2016 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4-100 : type SC connector family - Simplified receptacle SC-PC connector interfaces
NF C93-910-6-100*NF EN 61754-6-100:2016 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6-100 : type MU connector family - Simplified receptacle MU-PC connector interfaces
NF EN 61754-6-100:2016 Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces de connecteurs à fibres optiques - Partie 6-100 : famille de connecteurs de type MU - Interfaces de connecteurs MU-PC à embase simplifiée
NF DTU 55.2 P1-1/A1:2016 Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces de connecteurs à fibres optiques - Partie 6-100 : famille de connecteurs de type MU - Interfaces de connecteurs MU-PC à embase simplifiée
NF EN 61754-4-100:2016 Dispositifs d'interconnexion et composants passifs à fibres optiques - Interfaces de connecteurs à fibres optiques - Partie 4-100 : famille de connecteurs de type SC - Interfaces de connecteurs SC-PC à embase simplifiée

American National Standards Institute （ANSI), New chemical fiber

ANSI/TIA/EIA 455-186-1991 Proposed New FOTP, Gauge Retention Force Measurement for the Fiber Optic Components
ANSI/ASTM D5677:2005 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

海关总署, New chemical fiber

SN/T 1690.3-2019 New Textile Fiber Composition Analysis Method Part 3: Qualitative Identification of Graphene Modified Fibers

国家市场监督管理总局、中国国家标准化管理委员会, New chemical fiber

GB/T 39497-2020 New-type urbanization—Evaluation index system of quality city
GB/T 23006-2022 Integration of informatization and industrialization management systems—Requirements for enhanced capability grading
GB/T 37832-2019 Water saving enterprises—Textile industry of chemical filament yarns weaving
GB/T 39621-2020 Textiles—Quantitative chemical analysis—Mixture of cross-linked lyocell fibres and viscose or cupro or modal (method using formic acid and zinc chloride)

Taiwan Provincial Standard of the People's Republic of China, New chemical fiber

CNS 11656-1986 Glassfiber Reinforced Plastic Chemical-Resistant Tank
CNS 11657-1986 Method of Test for Glassfiber Reinforced Plastic Chemical-Resistant Tank

European Committee for Standardization (CEN), New chemical fiber

EN 14721:2005+A1:2007 Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete
EN 14721:2005 Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete Incorporates Amendment A1: 2007
EN ISO 1833-6:2010 Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) (ISO 1833-6:2007)
EN 1170-8:2008 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test
DD ENV 1170-8-1996 Test Method for Glass-Fibre Reinforced Cement - Part 8: Cyclic Weathering Type Test

American Water Works Association (AWWA), New chemical fiber

AWWA D120-2009 Thermosetting Fiberglass-Reinforced Plastic Tanks

Professional Standard - Agriculture, New chemical fiber

SN/T 1690.1-2012 New analytical methods for textile fiber composition - Part 1: Determination of soybean protein composite fiber content by nitric acid method

British Standards Institution (BSI), New chemical fiber

BS EN 14721:2005 Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete
BS EN 14721:2005+A1:2007 Test method for metallic fibre concrete. Measuring the fibre content in fresh and hardened concrete
BS EN 14721:2005+A1:2007(2008) Test method for metallic fibre concrete. Measuring the fibre content in fresh and hardened concrete
BS ISO 34-1:2015 Rubber, vulcanized or thermoplastic. Determination of tear strength. Trouser, angle and crescent test pieces
BS ISO 34-1:2010 Rubber, vulcanized or thermoplastic. Determination of tear strength. Trouser, angle and crescent test pieces
BS EN ISO 1833-6:2011 Textiles. Quantitative chemical analysis. Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride)
BS EN ISO 1833-6:2010 Textiles. Quantitative chemical analysis. Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride)
BS EN ISO 1833-22:2021 Tracked Changes. Textiles. Quantitative chemical analysis. Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride)
BS EN 1170-8:2008 Test method for glassfibre reinforced cement Part 8: Cyclic weathering type test
20/30392620 DC BS EN ISO 1833-22. Textiles. Quantitative chemical analysis. Part 22. Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride)
BS EN ISO 1833-22:2013 Textiles. Quantitative chemical analysis. Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride)
BS ISO 1268-11:2005 Fibre-reinforced plastics - Methods of producing test plates - Injection moulding of BMC and other long-fibre moulding compounds - Small plates
BS EN ISO 1833-6:2019 Tracked Changes. Textiles. Quantitative chemical analysis. Mixtures of viscose, certain types of cupro, modal or lyocell with certain other fibres (method using formic acid and zinc chloride)
BS 6091-3.1:1995 Vulcanized fibre for electrical purposes - Specifications for individual materials - Flat sheets
BS EN 61753-081-2:2014 Fibre optic interconnecting devices and passive components. Performance standard. Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C. Controlled environments
BS EN 50377-7-4:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. LC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre with full zirconia ferrule for category C
BS EN 50377-4-2:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
BS EN 50377-4-4:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type SC-PC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
BS EN 50377-13-3:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LX.5-APC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U
BS EN 50377-13-2:2011 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications. Type LX.5-PC DUPLEX terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, with full zirconia ferrule category U

Danish Standards Foundation, New chemical fiber

DS/EN 14721+A1:2008 Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete
DS/EN 60450:2004 Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials
DS/EN ISO 1833-6:2011 Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride)
DS/EN 1170-8:2008 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test
DS/EN 2374:1991 Aerospace series. Glass fibre reinforced mouldings and sandwich composites. Production of test panels
DS/EN 61754-6-1:2003 Fibre optic connector interfaces - Part 6-1: Type MU connector family - Simplified receptacle MU-PC connector interfaces
DS/EN 61754-4-1:2003 Fibre optic connector interfaces - Part 4-1: Type SC connector family - Simplified receptacle SC-PC connector interfaces

Lithuanian Standards Office , New chemical fiber

LST EN 14721+A1-2007 Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete
LST EN ISO 1833-6:2011 Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) (ISO 1833-6:2007)
LST EN 1170-8-2009 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test
LST EN 50377-4-2-2011 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications -- Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule cate

AENOR, New chemical fiber

UNE-EN 14721:2006+A1:2008 Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete
UNE-EN ISO 1833-6:2011 Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride) (ISO 1833-6:2007)

International Electrotechnical Commission (IEC), New chemical fiber

IEC 60450:2007 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
IEC 60450:2004 Measurement of the average viscometric degree of polymerisation of new and aged cellulosic electrically insulating materials
IEC 60450:2004+AMD1:2007 CSV Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials
IEC TS 62257-1:2003 Recommendations for small renewable energy and hybrid systems for rural electrification - Part 1: General introduction to rural electrification
IEC 61754-4-1:2003 Fibre optic connector interfaces - Part 4-1: Type SC connector family; Simplified receptable SC-PC connector interfaces

CZ-CSN, New chemical fiber

CSN 67 4357-1961 Rubbing nitrocellulose wood varnish ype C 1007
CSN 67 4360-1961 Nitrocelullose lacquer for offíce furni- ure and furniture interiors type C 1010

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, New chemical fiber

GB/T 29305-2012 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials

U.S. Military Regulations and Norms, New chemical fiber

ARMY A-A-59295 VALID NOTICE 1-2008 Corrosion Preventive Compounds, Cold Application (for New and Fielded Motor Vehicles and Trailers)
ARMY MIL-C-70810-1991 MILITARY SPECIFICATIONS COMBUSTIBLE CARTRIDGE CASE ASSEMBLY PARTS NITROCELLULOSE PAPER PROCESS, FOR CHARGE, PROPELLING, 155MM, M203A1

Xinjiang Provincial Standard of the People's Republic of China, New chemical fiber

DB65/T 4554-2022 Technical Guidelines for Normalized Prevention and Control of Novel Coronavirus Pneumonia Schools

未注明发布机构, New chemical fiber

BS EN 60450:2004(2007) Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials

American Society for Testing and Materials (ASTM), New chemical fiber

ASTM C1791-14 Standard Guide for Reduction of Efflorescence Potential in New Unit Pavement Systems
ASTM D787-18 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
ASTM E2552-08(2014) Standard Guide for Assessing the Environmental and Human Health Impacts of New Energetic Compounds
ASTM E2552-08 Standard Guide for Assessing the Environmental and Human Health Impacts of New Energetic Compounds
ASTM E2552-23 Standard Guide for Assessing the Environmental and Human Health Impacts of New Compounds for Military Use
ASTM D706-15 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)
ASTM D706-20 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)
ASTM C1793-15 Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications
ASTM D3681-18 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition

US-GSA, New chemical fiber

GSA A-A-529 A-1996 ADHESIVE AND SEALING COMPOUND, CELLULOSE NITRATE BASE (SOLVENT TYPE)

Japanese Industrial Standards Committee (JISC), New chemical fiber

JIS K 6252-1:2015 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces
JIS C 5964-6-1:2014 Fiber optic connector interfaces -- Part 6-1: Type MU connector family -- Simplified receptacle MU-PC connector interfaces (F17 type)
JIS C 5964-6-100:2018 Fiber optic connector interfaces -- Part 6-100: Type MU connector family -- Simplified receptacle MU-PC connector interfaces (F17 type)

International Organization for Standardization (ISO), New chemical fiber

ISO 34-1:2010 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 34-1:2015 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces
ISO 1833-6:2007 Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride)
ISO 1833-6:2018 Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose, certain types of cupro, modal or lyocell with certain other fibres (method using formic acid and zinc chloride)
ISO 10352:2020 Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of mass per unit area and fibre mass per unit area
ISO 1268-11:2005 Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates

GM North America, New chemical fiber

GM GMP.UP.009-2014 Polyester SMC - Injection Molded, 22.5% Glass Reinforced (Issue 2; Do Not Use on New Programs; Replaced by GMW17170)
GM GMP.UP.014-2014 Polyester BMC - Injection Molded, 11% Glass Reinforced (Issue 5; Do Not Use on New Programs; Replaced by GMW17170)
GM GMP.PA66.035R-2011 Nylon 66 - Recycled, 43% Glass Fiber Reinforced, Heat Stabilized (Issue 3; Do Not Use on New Programs; No Replacement)
GM GMP.PP.075-2014 Polypropylene - 20% Glass Fiber Reinforced, Chemically Coupled, Homoplymer (Issue 2; Do Not Use on New Programs; Replaced by GMW 16607 - GMW16607P-PPGF20)
GM GMP.PP.029-2014 Polypropylene - 20% Glass Fiber Reinforced Chemically Coupled Copolymer (Issue 4; Do Not Use on New Programs; Replaced by GMW16892 - GMW16892P-PP/PEGF20)
GM GMP.PP.003-2014 Polypropylene - 30% Glass Fiber Reinforced, Impact Modified Chemically Coupled (Issue 3; Do Not Use on New Programs; Replaced by GMW16892 - GMW16892P-PP/PEGF30)
GM GMP.PA6.046R-2011 Nylon 6 - Recycled 15% Glass Fiber Reinforced/25% Mineral Filled, Heat Stabilized (Issue 3; Do Not Use on New Programs; No Replacement)
GM GMP.PP.109-2014 Polypropylene - 10% Glass-Fiber Reinforced, Chemically-Coupled, Heat Stabilized, Copolymer (Issue 2; Do Not Use on New Programs; Replaced by GMW16892 - GMW16892P-PP/PE-GF10)
GM GMP.PP.099-2013 Polypropylene (PP) - 20% Glass Fiber Reinforced, UV Stabilized, Chemically Coupled, Homopolymer - ISO Tests (Issue 3; Do Not Use on New Programs; No Replacement)
GM GMP.PP.097-2014 PP-5% Glass Fiber Reinforced, Impact Modified, Chemically Coupled, Heat Resistant, Copolymer (Issue 2; Do Not Use on New Programs; Replaced by GMW16892 - GMW16892P-PP/PE-GF5)
GMP.PVC.086-2011 PVC ?70 Shore A, Weatherable, Lubricated, Elastomeric Extrusion Molding Compound Issue 3; Do Not Use on New Programs; Replaced by GMW16048
GMP.PVC.050-2011 PVC ?65 Shore D, Weatherable, 8% Mineral Filled, Extrusion Molding Compound Issue 2; Do Not Use on New Programs; Replaced by GMW16084
GM GM6171M-2011 Material and Performance Requirements for Type TR (Thread Rolling) Screws Case Hardened (Issue 3; Do Not Use on New Programs; Replaced by GMW15170; Best Copy Available)
GMP.PVC.035-2011 PVC ?60 Shore A, Interior, Integral Colored, Extrusion/Injection ?Molding Compound Issue 4; Do Not Use on New Programs; Replaced by GMW16080
GMP.PVC.023-2011 PVC ?70 Shore A, UV Stabilized, Integral Colored, Injection Molding Compound Issue 3; Do Not Use on New Programs; Replaced by GMW16080
GMP.PVC.093-2011 PVC, White Stain Resistant or Integral Colored, Weatherable, Extrusion Molding Compound Issue 4; Do Not Use on New Programs; Replaced by GMW16084

ZA-SANS, New chemical fiber

SANS 1150:2007 Glass-reinforced polyester (GRP) laminated sheets (profiled or flat)
SANS 1833-6:2007 Textiles - Quantitative chemical analysis Part 6: Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride)
ARP 062-7-2008 Recommendations for small renewable energy and hybrid systems for rural electrification Part 7: Generators
ARP 062-9-1-2009 Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-1: Micropower systems
ARP 062-7-1-2008 Recommendations for small renewable energy and hybrid systems for rural electrification Part 7-1: Generators - Photovoltaic arrays
ARP 062-9-4-2008 Recommendations for small renewable energy and hybrid systems for rural electrification Part 9-4: Integrated system - User installation
ARP 062-7-3-2008 Recommendations for small renewable energy and hybrid systems for rural electrification Part 7-3: Generator set - Selection of generator sets for rural electrification systems

Korean Agency for Technology and Standards (KATS), New chemical fiber

KS K ISO 1833-22:2022 Textiles — Quantitative chemical analysis — Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres(method using formic acid and zinc chloride)
KS K ISO 1833-6:2009 Textiles－Quantitative chemical analysis－Part 6：Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride)
KS M 3082-2007 Test methods for shear properties of fiber reinforced plastics by the V-notched specimen
KS K ISO 1833-6:2022 Textiles — Quantitative chemical analysis —Part 6: Mixtures of viscose, certain types of cupro, modal or lyocell with certain other fibres(method using formic acid and zinc chloride)
KS C IEC 62257-1:2011 Recommendations for small renewable energy and hybrid systems for rural electrification-Part 1:General introduction to rural electrification
KS C IEC 61754-4-1:2005 Fibre optic connector interfaces-Part 4-1:Type SC connector family-Simplified receptacle SC-PC connector interfaces
KS C IEC 61754-4-1-2005(2020) Fibre optic connector interfaces－Part 4－1：Type SC connector family－Simplified receptacle SC－PC connector interfaces

KR-KS, New chemical fiber

KS K ISO 1833-22-2022 Textiles — Quantitative chemical analysis — Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres(method using formic acid and zinc chloride)
KS K ISO 1833-6-2022 Textiles — Quantitative chemical analysis —Part 6: Mixtures of viscose, certain types of cupro, modal or lyocell with certain other fibres(method using formic acid and zinc chloride)

Shanghai Provincial Standard of the People's Republic of China, New chemical fiber

DB31/T 1411-2023 Digital coding rules for novel coronavirus (2019-nCoV) antigen detection kits

US-CFR-file, New chemical fiber

CFR 21-524.1484i-2014 Food and drugs. Part524:Ophthalmic and topical dosage form new animal drugs. Section524.1484i:Neomycin and hydrocortisone ointment.
CFR 21-524.1484d-2014 Food and drugs. Part524:Ophthalmic and topical dosage form new animal drugs. Section524.1484d:Neomycin, hydrocortisone, and tetracaine otic ointment.
CFR 21-529.1115-2014 Food and drugs. Part529:Certain other dosage form new animal drugs. Section529.1115:Halothane.
CFR 21-529.1150-2013 Food and drugs. Part529:Certain other dosage form new animal drugs. Section529.1150:Hydrogen peroxide.
CFR 21-524.1484h-2014 Food and drugs. Part524:Ophthalmic and topical dosage form new animal drugs. Section524.1484h:Neomycin, penicillin, polymyxin B, and hydrocortisone suspension.
CFR 21-524.155-2014 Food and drugs. Part524:Ophthalmic and topical dosage form new animal drugs. Section524.155:Bacitracin, neomycin, polymyxin B, and hydrocortisone ophthalmic ointment.
CFR 21-524.1662a-2014 Food and drugs. Part524:Ophthalmic and topical dosage form new animal drugs. Section524.1662a:Oxytetracycline and hydrocortisone spray.

ES-UNE, New chemical fiber

UNE-EN ISO 1833-22:2022 Textiles - Quantitative chemical analysis - Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride) (ISO 1833 22:2020)
UNE-EN 1170-8:2009 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test
UNE-EN 61754-6-100:2016 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6-100: Type MU connector family - Simplified receptacle MU-PC connector interfaces (Endorsed by AENOR in May of 2016.)
UNE-EN 61754-4-100:2016 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4-100: Type SC connector family - Simplified receptacle SC-PC connector interfaces (Endorsed by AENOR in March of 2016.)
UNE-EN ISO 1833-6:2020 Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose, certain types of cupro, modal or lyocell with certain other fibres (method using formic acid and zinc chloride) (ISO 1833-6:2018)
UNE-EN 50377-4-2:2015 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 4-2: Type SC/APC simplex 8° terminated on IEC 60793-2-50 of types B1.1 and B1.3 singlemode fibre, with full zirconia ferrule c...

SAE - SAE International, New chemical fiber

SAE AMS3672A-1987 PLASTIC MOLDING COMPOUND@ EPI-BIS EPOXY Glass Fiber Reinforced@ Structural
SAE AMS3672C-1995 PLASTIC MOLDING COMPOUND@ EPI-BIS EPOXY Glass Fiber Reinforced@ Structural
SAE AS5675-2012 Characterization and Requirements for New Aerospace Fiber Optic Cable Assemblies - Jumpers@ End Face Geometry@ Link Loss Measurement@ and Inspection
SAE AMS3961/1-2015 350 °F Autoclave Cure@ Low Flow Toughened Epoxy Prepregs@ Type 38@ Class 2@ Grade 193@ Style 3K-70-PW@ Fiber 1

Society of Automotive Engineers (SAE), New chemical fiber

SAE AMS3672B-1992 PLASTIC MOLDING COMPOUND, EPI-BIS EPOXY Glass Fiber Reinforced, Structural
SAE AMS3672-1981 PLASTIC MOLDING COMPOUND, EPI-BIS EPOXY Glass Fiber Reinforced, Structural
SAE AMS6891/3-2021 Carbon Fiber and Fiberglass Epoxy/Prepreg Products with 350 °F (177 °C) Cure for Aerospace Applications: Type 34, Class 4, Grade 294, Style 7781
SAE AMS6891/2-2020 Carbon Fiber and Fiberglass Epoxy/Prepreg Products with 350 °F (177 °C) Cure for Aerospace Applications: Type 40, Class 1, Grade 196, Style 6K-PW
SAE AMS6891/4-2021 Carbon Fiber and Fiberglass Epoxy/Prepreg Products with 350 °F (177 °C) Cure for Aerospace Applications: Type 42, Class 4, Grade 48, Style 108
SAE AS1773-1995 Fiber Optics Mechanization of a Digital Time Division Command/Response Multiplex Data Bus
SAE AMS6891/1-2020 Carbon Fiber and Fiberglass Epoxy Prepreg Products with 350 °F (177 °C) Cure for Aerospace Applications: Type 35, Class 1, Grade 191
SAE AMS6562/1-2023 Medium Temperature, Out-of-Autoclave, Oven-Vacuum-Bag Cure Epoxy Resin Impregnated Fiber Reinforced Composite Materials, Type 35, Class 4, Grade 293, Style 7781

International Telecommunication Union (ITU), New chemical fiber

ITU-T G.651.1 AMD 1-2008 Characteristics of a 50/125 µm multimode graded index optical fibre cable for the optical access network Amendment 1: New Appendix I Historical perspective on the evolution of the specification of multimode optical fibre cable Study Group 15

TIA - Telecommunications Industry Association, New chemical fiber

TIA-862-B-1-2017 Structured Cabling Infrastructure Standard for Intelligent Building Systems Addendum 1: Updated References@ Accommodation of New Media Types (Addendum to TIA-862-B)

European Committee for Electrotechnical Standardization（CENELEC）, New chemical fiber

EN 60450:2004 Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials (Incorporates Amendment A1: 2007)
EN 61754-6-100:2016 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 6-100: Type MU connector family - Simplified receptacle MU-PC connector interfaces
EN 61754-4-100:2016 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4-100: Type SC connector family - Simplified receptacle SC-PC connector interfaces
EN 61754-4-1:2003 Fibre Optics Connector Interfaces - Part 4-1: Type SC Connector Family - Simplified Receptacle SC-PC Connector Interfaces

Jiangsu Provincial Standard of the People's Republic of China, New chemical fiber

DB32/T 3762.18-2021 Novel Coronavirus Detection Technical Specifications Part 18: Large-scale Nucleic Acid Detection Procedures
DB32/T 3761.37-2021 Part 37 of the Technical Specifications for the Prevention and Control of Novel Coronavirus Pneumonia: Blood Purification Center
DB32/T 3761.38-2021 Part 38 of the Technical Specifications for Prevention and Control of Novel Coronavirus Pneumonia: Digestive Endoscopy Center
DB32/T 3762.19-2022 Technical Specifications for Novel Coronavirus Detection Part 19: Fully Automatic Nucleic Acid Rapid Integrated Detection
DB32/T 3762.13-2021 Novel Coronavirus Detection Technical Specification Part 13: Propidium Azide Bromide-Fluorescent PCR Detection Procedure
DB32/T 3762.15-2021 Technical Specifications for Detection of Novel Coronavirus Part 15: Procedures for Detection of Serum/Plasma IgM and IgG Antibody Magnetic Particle Chemiluminescent Method

RO-ASRO, New chemical fiber

STAS 8521-1977 TOPS AND CHEMICAL FIBRES OF WOOL TYPE TOPS Determination of wool fibre length barbe and hauteur using a comb.sorter

RU-GOST R, New chemical fiber

GOST 10362-1976 Pressure hoses of vulcanized rubber with thread reinforcement and without end fitting. Specifications
GOST 21516-1976 Artificial fur made of chemical fibres. Method for wear modelling and method for wear resistance estimate
GOST 33351-2015 Polymer composites. Production of samples for testing by injection moulding of long-fibre moulding compounds

CEN - European Committee for Standardization, New chemical fiber

EN ISO 1833-6:2019 Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose@ certain types of cupro@ modal or lyocell with certain other fibres (method using formic acid and zinc chloride)

YU-JUS, New chemical fiber

JUS F.S3.134/1-1992 Testing (Quantitative analysis) of fibres mixtures. Binary mixtures of viscose or certain types of cupro or modal and coton fibres. Formic acid and zinchloride method. Amendments

ES-AENOR, New chemical fiber

UNE 53-361-1990

US-FCR, New chemical fiber

FCR NE-M-7-6T-1982 PRECIPITATION-HARDENING STAINLESS STEEL BARS, SHAPES, AND FORGINGS (ASME SA-564 WITH ADDITIONAL REQUIREMENTS) (INACTIVE FOR NEW DESIGN)

Indonesia Standards, New chemical fiber

SNI IEC 62257-1:2009 Recommendations for small renewable energy and hybrid systems for rural electrification - Part 1: General introduction to rural electrification
SNI ISO 1833-6:2011 Textiles - Quantitative chemical analysis - Part 6: Mixtures of viscose or certain types of cupro or rayon modal or lyocell and cotton fibres (method using formic acid and zinc chloride)

(U.S.) Ford Automotive Standards, New chemical fiber

FORD ESF-M4D405-C3-1992 POLYETHYLENE TEREPHTHALATE (PET), 30 % GLASS FIBER REINFORCED, HIGH MELT FLOW RATE MOLDING COMPOUND
FORD ESF-M4D159-A-2006 NYLON (TYPE 66), GLASS FIBER REINFORCED - MOLYBDENUM DISULFIDE FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M4D822-A2-2014 POLYAMIDE 6 (PA6), HEAT STABILIZED 40% GLASS FIBER/MINERAL REINFORCED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

GM Global, New chemical fiber

GMW 16564-2011 Structural Low-Density, Carbon Fiber Liquid Molded Composite Issue 1; English

PT-IPQ, New chemical fiber

NP ENV 1170-8-2000 Test method for glass-fibre reinforced cement Part 8:Cyclic weathering type test

Professional Standard - Chemical Industry, New chemical fiber

HG/T 5854～5857-2021 Coated reflective films for optical functional films, triacetyl cellulose (TAC) anti-glare films, anti-fouling cured films, and transparent cured films for cover plates (2021)

GOSTR, New chemical fiber

GOST R 57314-2016 Industrial automation systems and integration. Innovation, coordination and collaboration in service driven manufacturing supply chains. Reference model for industrial services