ZH
RU
ES
Orifice automatic measuring instrument
Orifice automatic measuring instrument, Total:137 items.
In the international standard classification, Orifice automatic measuring instrument involves: Measurement of fluid flow, Geology. Meteorology. Hydrology, Radiation measurements, Electricity. Magnetism. Electrical and magnetic measurements, Equipment for petroleum and natural gas industries, Analytical chemistry, Paper and board, Farming and forestry, Air quality, Shipbuilding and marine structures in general, Industrial automation systems, Environmental protection, Rubber, Rubber and plastics products, Metrology and measurement in general, Measurement of force, weight and pressure, Raw materials for rubber and plastics, Vocabularies, Interface and interconnection equipment, Railway rolling stock, Measurement of volume, mass, density, viscosity, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Graphical symbols, Applications of information technology, Plastics, Insulating materials, Insulating fluids, Fuels.
American National Standards Institute （ANSI), Orifice automatic measuring instrument
Indonesia Standards, Orifice automatic measuring instrument
Professional Standard - Meteorology, Orifice automatic measuring instrument
- QX/T 32-2005 Temperature grads automatic measuring instrument
Group Standards of the People's Republic of China, Orifice automatic measuring instrument
- T/QGCML 1992-2023
- T/ZQB 002-2022
- T/CIMA 0009-2019 Automatic pretreatment instrument for rapid detection of malachite green in aquatic products
- T/CASME 127-2022 Technical specification on operation and maintenance of water quality on-line automatic monitoring equipment of chemical oxygen demand
- T/NAIA 0139-2022 Diesel engine nitrogen oxide reducing agent urea aqueous solution (AUS 32) Determination of urea content Automatic Kjeldahl method
ES-AENOR, Orifice automatic measuring instrument
German Institute for Standardization, Orifice automatic measuring instrument
- DIN 43834:1982 Measurement and control; fastening for measuring and control instruments for panel mounting; fastening component; fastening holes in the instrument
- DIN 75501:1987-10 Instrument panel-measuring instruments for motor vehicles; built-in diameters
- DIN 75501:1987 Instrument panel-measuring instruments for motor vehicles; built-in diameters
- DIN EN 13352:2012-06 Specification for the performance of automatic tank contents gauges; German version EN 13352:2012
- DIN 43834:1982-11 Measurement and control; fastening for measuring and control instruments for panel mounting; fastening component; fastening holes in the instrument
- DIN ISO 7765-2:2008 Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 2: Instrumented puncture test (ISO 7765-2:1994)
- DIN 8131:2007 Automatic gravimetric filling instruments - Metrological and technical requirements - Tests (OIML R 61-1:2004)
- DIN ISO 7765-2:2009 Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 2: Instrumented puncture test (ISO 7765-2:1994); English version of DIN ISO 7765-2:2009-02
- DIN 8131:2007-11 Automatic gravimetric filling instruments - Metrological and technical requirements - Tests (OIML R 61-1:2004)
- DIN VDE 0119-207-3:2004 State of the railway vehicles - Control and instrumentation technology - Part 207-3: Automatic traction and braking control
- DIN 8132:2004-02 Continuous totalizing automatic weighing instruments (Belt weighers) - Metrological and technical requirements, tests (OIML R 50-1:1997)
- DIN EN 60444-5:1997 Measurement of quartz crystal unit parameters - Part 5: Methods for the determination of equivalent electrical parameters using automatic network analyser techniques and error correction (IEC 60444-5:1995); German version EN 60444-5:1997
RU-GOST R, Orifice automatic measuring instrument
- GOST 8.586.2-2005 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 2. Orifice plates. Technical requirements
- GOST 8.586.5-2005 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
- GOST 8.563.2-1997 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by differential pressure method. Measurement procedure by orifice instruments
- GOST 8.586.1-2005 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 1. Principle of the method of measurements and general requirements
- GOST R 8.874-2014 State system for ensuring the uniformity of measurements. Autocollimators. Verification procedure
- GOST 8.586.4-2005 State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 4. Venturi tubes. Technical requirements
- GOST 8.586.3-2005 State system for ensuring the uniformity of measurements. Measurement of liquids and gases flow rate and quantity by means of orifice instruments. Part 3. Nozzles and Venturi nozzles. Technical requirements
- GOST 33242-2015 Automatic instruments for weighing road vehicles in motion and measuring axle loads. Metrological and technical requirements. Tests
- GOST 8.610-2012 State system for ensuring the uniformity of measurements. Automatic gravimetric filling instruments. Part 1. Metrological and technical requirements. Test methods
- GOST 8.646-2015 State system for ensuring the uniformity of measurements. Automatic instruments for weighing road vehicles in motion and measuring axle loads. Methods of verification
- GOST 21.404-1985 System of design documents for construction. Industrial process automation. Instrumentation symbols for use in diagrams
- GOST R 53655.2-2009 Plastics film and sheeting. Determination of impact resistance by the free-falling weight method. Part 2. Instrumented puncture test
- GOST R ISO 13584-501-2010 Industrial automation system and integration. Parts library. Part 501. Reference dictionary for measuring instruments. Registration procedure
- GOST R 57950-2017 Plastics. Determination of dynamic mechanical properties. Part 10. Complex shear viscosity using a parallel-plate oscillatory rheomete
- GOST IEC 60814-2014 Insulating liquids. Oil-impregnated paper and pressboard. Determination of water content by automatic coulometric Karl Fisher titration
- GOST R IEC 60814-2013 Insulating liquids. Oil-impregnated paper and pressboard. Determination of water by automatic coulometric Karl Fisher titration
Professional Standard - Electron, Orifice automatic measuring instrument
- SJ/T 10237-1991 Specification for LCR automatic test instrument for Type ED2814
- SJ 20824-2002 General specification for military LCR automatic measuring instrument
Korean Agency for Technology and Standards (KATS), Orifice automatic measuring instrument
- KS B OIMLR 85-2006(2016) Automatic level gauges for measuring the level of liquid in fixed storage tanks
- KS B OIMLR 85-2006 Automatic level gauges for measuring the level of liquid in fixed storage tanks
- KS B 5360-1990 Continuous Analysers for Oxides of Nitrogen in Ambient Air
- KS B 5359-1990 Continuous Analysers for Sulfur Dioxide in Ambient Air
- KS B 5358-1987 Continuous analyzer for carbon monoxide in ambient air
- KS B 5358-2001 Continuous analyzer for carbon monoxide in ambient air
- KS B 5360-2001 Continuous Analysers for Oxides of Nitrogen in Ambient Air
- KS B 5358-1982 Continuous analyzer for carbon monoxide in ambient air
- KS B 5357-1981 Continuous analyzers for hydrocarbons in ambient air
- KS M ISO 15671:2007 Rubber and rubber additives－Determination of total sulfur content using an automatic analyser
- KS M ISO 15672:2007 Rubber and rubber additives－Determination of total nitrogen content using an automatic analyser
- KS M ISO 15671-2007(2017) Rubber and rubber additives－Determination of total sulfur content using an automatic analyser
- KS M ISO 15672-2007(2017) Rubber and rubber additives－Determination of total nitrogen content using an automatic analyser
- KS M ISO 15671-2007(2022) Rubber and rubber additives－Determination of total sulfur content using an automatic analyser
- KS M ISO 15672-2007(2022) Rubber and rubber additives－Determination of total nitrogen content using an automatic analyser
- KS M ISO 7765-2:2002 Plastics film and sheeting－Determination of impact resistance by the free－falling dart method－Part 2：Instrumented puncture test
- KS B ISO 13584-501-2011(2016) Industrial automation systems and integration－Parts library－Part 501：Reference dictionary for measuring instruments－Registration procedure
- KS B ISO 13584-501-2011(2021) Industrial automation systems and integration－Parts library－Part 501：Reference dictionary for measuring instruments－Registration procedure
- KS B ISO 13584-501:2011 Industrial automation systems and integration-Parts library-Part 501:Reference dictionary for measuring instruments-Registration procedure
- KS M ISO 248-2:2014 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
Japanese Industrial Standards Committee (JISC), Orifice automatic measuring instrument
- JIS K 0806:1997 Automatic chemical oxygen demand meter
- JIS B 7604-1:2017 Automatic gravimetric filling instruments -- Part 1: Metrological and technical requirements
- JIS B 7982:2002 Automated measuring systems and analyzers for nitrogen oxides in flue gas
- JIS B 7981:2002 Automated measuring systems and analyzers for sulfur dioxide in flue gas
- JIS B 7611-2:2009 Non-automatic weighing instruments -- Metrological and technical requirements and tests -- Part 2: Measuring instruments used in transaction or certification
- JIS B 7611-2:2015 Non-automatic weighing instruments -- Metrological and technical requirements and tests -- Part 2: Measuring instruments used in transaction or certification
- JIS K 6238-2:2009 Rubber, raw -- Determination of volatile-matter content -- Part 2: Thermogravimetric method using automatic analyzer with infrared drying
National Metrological Verification Regulations of the People's Republic of China, Orifice automatic measuring instrument
- JJG 1012-2006 On-line Automatic Determinator of Chemical Oxygen Demand (COD)
- JJG 1012-2019 On-line Automatic Determinators of Chemical Oxygen Demand (COD)
- JJG(轻工) 28-1989 Verification rules for bicycle flywheel circular runout tester
- JJG(机械) 110-1992 SYZZ series speed and fuel consumption automatic measuring instrument verification regulations
- JJG(轻工) 44-1989 Verification rules for radial runout tester of bicycle bell shaft
International Organization for Standardization (ISO), Orifice automatic measuring instrument
- ISO/TS 20460:2015 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
- ISO 7765-2:1994 Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 2: Instrumented puncture test
- ISO/TR 3313:1974 Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or Venturi tubes, in particular in the case of sinusoidal or square wave intermittent periodic-type fluctuations
- ISO/TR 3313:1992 Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or Venturi tubes
- ISO 15671:2000 Rubber and rubber additives - Determination of total sulfur content using an automatic analyser
- ISO 15671:2023 Rubber and rubber products — Determination of total sulfur content using an automatic analyser
- ISO 15672:2000 Rubber and rubber additives - Determination of total nitrogen content using an automatic analyser
Professional Standard - Agriculture, Orifice automatic measuring instrument
- NY/T 2419-2013 Determination of total nitrogen in plant.Automatic kjeldahl apparatus method
- 空气和废气监测分析方法 3.4.2-2003 Part 3 Air Quality Monitoring Chapter 4 Air Quality Continuous Automatic Monitoring System (B) 2 Working Principle of Air Quality Continuous Automatic Monitoring Instrument
PL-PKN, Orifice automatic measuring instrument
- PN M42302-1974 National Automa?ion and Measurement ys?em ressure gauges fixture eales
- PN M42352-1974 Naltioinal Arutamaticwi nd Measturemerat System ecording instouiments heets and paper dósfcs
- PN G04514-17-1993 Solid fuel. Determination of sulphur. Determination of sulphur by using automatic analysers
- PN S95020-1992 Measuring instruments for motor vehicles and motorizet bicycles. Speedometers and hodometers. Requirements and tests
- PN G04514-16-1990 Solid fuels Determination of total sulphur and of sulphur in ash with the use of the LECO automatic analyser
- PN T06530-1972 CAMAC A modular instrumentation system for automatic measurement and control Construction and logie organisation
CZ-CSN, Orifice automatic measuring instrument
- CSN 42 0622 Cast.19-1981 Bronzes. Determination of sulphur by the iodometric method and by methods by the use of automatic analyzers
- CSN 42 0620 Cast.15-1981 Brasses. Determínation of sulphur by the iodometric method and methods with the use oí automatic analyzers
- CSN 44 1847-1983 Manganese ores, concentrates, and aglomerates. Determination of sulphur content. Titrimetric and gravimetric methods, and methods using analysers automatic
British Standards Institution (BSI), Orifice automatic measuring instrument
- PD ISO/TS 20460:2015 Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges
- 19/30381640 DC BS ISO 15671. Rubber and rubber products. Determination of total sulfur content using an automatic analyser
- BS ISO 15671:2023 Tracked Changes. Rubber and rubber products. Determination of total sulfur content using an automatic analyser
- BS EN 17389:2020 Stationary source emissions. Quality assurance and quality control procedures for automated dust arrestment plant monitors
- BS ISO 15671:2000 Rubber and rubber additives - Determination of total sulfur content using an automatic analyser
- BS ISO 15672:2000 Rubber and rubber additives - Determination of total nitrogen content using an automatic analyser
- 19/30386014 DC BS EN 17389. Stationary source emissions. Quality assurance and quality control procedures for automated dust arrestment plant monitors
- BS ISO 13584-501:2007 Industrial automation systems and integration. Parts library - Reference dictionary for measuring instruments. Registration procedure
- BS ISO 248-2:2012 Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
American Society for Testing and Materials (ASTM), Orifice automatic measuring instrument
- ASTM UOP821-81 Automated Micro Pore Size Distribution of Porous Substances by Nitrogen Adsorption and/or Desorption Using a Micromeritics Analyzer
- ASTM D7754-11 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Orifice automatic measuring instrument
- GB/T 28561-2023 Automation, control and measuring instruments for marine electrical equipment
- GB/T 9249-1988 Self-balance recorders and indicators for use in industerial-process measurement and control systems
- GB/T 9249-2008 Self-balance recorders and indicators for use in indutrial-process measurement and control systems
Professional Standard - Aviation, Orifice automatic measuring instrument
- HB 6796-1993 5000 times pneumatic measuring instrument with positioning step blind hole inner diameter measuring head (D≥8~14)
- HB 6797-1993 5000 times pneumatic measuring instrument with positioning step blind hole inner diameter measuring head (D>14~30)
- HB 6802-1993 10000 times pneumatic measuring instrument with positioning step blind hole inner diameter measuring head (D≥8~14)
- HB 6803-1993 10000 times pneumatic measuring instrument with positioning step blind hole inner diameter measuring head (D>14~30)
International Electrotechnical Commission (IEC), Orifice automatic measuring instrument
- IEC TR 60668:1980 Dimensions of panel areas and cut-outs for panel and rack-mounted industrial-process measurement and control instruments
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Orifice automatic measuring instrument
- ASHRAE 41.8-1989 Standard Methods of Measurement of Flow of Liquids in Pipes Using Orifice Flowmeters
AENOR, Orifice automatic measuring instrument
- UNE 32006:1995 SOLID MINERAL FUELS. DETERMINATION OF GROSS CALORIFIC VALUE BY AUTOMATIC CALORIMETER.
- UNE-ISO 15671:2015 Rubber and rubber additives. Determination of total sulfur content using a automatic analyser
- UNE-ISO 248-2:2013 Rubber, raw — Determination of volatilematter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
国家市场监督管理总局、中国国家标准化管理委员会, Orifice automatic measuring instrument
- GB/T 40723-2021 Rubber—Determination the contents of total sulfur and total nitrogen — Automatic analyser method
RO-ASRO, Orifice automatic measuring instrument
- STAS 6019/3-1988 Mcasurement and monitoring-automati- zation in industrial processes APPARATUS AND HQUII'MKNTS Tenuinology
- STAS 7347/1-1983 Measurement of fluid flow in pressure pipe systems METHOD BY THROTTLING THE FLOW SEGTION. MEASUREMENT BYORIFICEPLATESAND NOZZLES
AT-ON, Orifice automatic measuring instrument
- ONORM M 9418-2001 Automatic concentration measuring instruments for carbon monoxide in garages - Specifications and testing
Professional Standard - Commodity Inspection, Orifice automatic measuring instrument
- SN/T 0736.11-2002 Chemical analysis of fertilizers for import and export.Determination of nitrogen content by auto analyzer
National Metrological Technical Specifications of the People's Republic of China, Orifice automatic measuring instrument
- JJF 1786-2019 Program of Pattern Evaluation of On-line Automatic Determinators for Chemical Oxygen Demand (COD)
Association Francaise de Normalisation, Orifice automatic measuring instrument
- X10-105:1992 Measurement of pulsating fluid flow in a pipe by means of orifice plates, nozzles or venturi tubes.
- CWA 15846:2008 Measuring method for Dynamic Compactness & Bearing Capacity with SP-LFWD (Small - plate Light Falling Weight Deflectometer)
- XP ISO/TS 20460:2016 Papiers et cartons - Essais en ligne automatisés - Comparabilité métrologique entre mesures normalisées et résultats de jauges en continu
- XP Q03-210-2016 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
- XP Q03-210*XP ISO/TS 20460:2016 Paper and board - Automated on-line testing - Metrological comparability between standardized measurements and output of on-line gauges
- NF ISO 24578:2021 Hydrométrie - Profileurs acoustiques à effet Doppler - Méthode et application pour le mesurage de l'écoulement à surface libre sur un bateau mobile
- NF EN 17389:2020 Émissions de sources fixes - Procédures d'assurance qualité et de contrôle qualité applicables aux analyseurs automatiques pour la surveillance des systèmes de dépoussiérage
- NF ISO 18522:2017 Papier et carton - Essais hors ligne - Mesure des propriétés physiques pour profils ST (sens travers) sur bancs automatisés
- NF X43-016:1977 Method for the determination of an acid gas pollution index(expressed as SO2 equivalent)using a continuous sampling automatic sequential analyser.
- NF EN 15859:2010 Qualité de l'air - Certification des analyseurs automatiques pour la surveillance des systèmes de réduction des poussières à l'émission des sources fixes - Spécifications de performance et modes opératoires d'essai
中国气象局, Orifice automatic measuring instrument
- QX/T 475-2019 Technical requirements for air negative ion automatic measuring instrument capacitive inhalation method
Professional Standard - Environmental Protection, Orifice automatic measuring instrument
- HJ 377-2019 Technical requirements and detection methods of chemical oxygen demand (CODCr) water quality online automatic monitor
- HJ/T 377-2007 Technical requirement for environmental protection product Water quality on-line automatic monitor of Chemical Oxygen Demand (COD)
Professional Standard - Hydroelectric Power, Orifice automatic measuring instrument
- SD 313-1989 Method for measuring particle number and size distribution in oil (automatic particle counter method)
International Telecommunication Union (ITU), Orifice automatic measuring instrument
- ITU-T O.22-1992 CCITT Automatic Transmission Measuring and Signalling Testing Equipment ATME No. 2 - Specifications of Measuring Equipment (Study Group IV) 35 pp
Institute of Electrical and Electronics Engineers (IEEE), Orifice automatic measuring instrument
- ANSI/IEEE Std 583-1982 IEEE Standard Modular Instrumentation and Digital Interface System (CAMAC) (Computer Automated Measurement and Control)
Professional Standard - Machinery, Orifice automatic measuring instrument
- JB/T 9250-1999 Specifications of self - balance recorders and indicators with electric contacts for industrial - process measurement and control systems
European Committee for Electrotechnical Standardization（CENELEC）, Orifice automatic measuring instrument
- EN 60444-5:1997 Measurement of Quartz Crystal Unit Parameters Part 5: Methods for the Determination of Equivalent Electrical Parameters Using Automatic Network Analyzer Techniques and Error Correction
国家能源局, Orifice automatic measuring instrument
- NB/T 42140-2017 Determination of moisture content of insulating liquid oil-impregnated paper and oil-impregnated cardboard by Karl Fischer automatic coulometric titration