ZH
RU
ES

critical range table

critical range table, Total:114 items.

In the international standard classification, critical range table involves: Surface treatment and coating, Semiconductor devices, Linear and angular measurements, Iron and steel products, Adhesives, Technical drawings, Screw threads, Shafts and couplings, Products of the chemical industry, Graphical symbols, Sports equipment and facilities, Vacuum technology, Protection of and in buildings, Electrical wires and cables, Elements of buildings, Nuclear energy engineering.

Instrument Society of America (ISA), critical range table

ISA TR91.00.02-2003 Criticality Classification Guideline for Instrumentation

American Society for Testing and Materials (ASTM), critical range table

ASTM D7541-11(2015) Standard Practice for Estimating Critical Surface Tensions
ASTM D7541-11 Standard Practice for Estimating Critical Surface Tensions
ASTM D7541-09 Standard Practice for Estimating Critical Surface Tensions
ASTM D7541-11(2022) Standard Practice for Estimating Critical Surface Tensions

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, critical range table

GB/T 11276-2007 Determination of Critical Micelle Concentration of Surfactant
GB/T 1800.4-1999 Limits and fits Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 11278-1989 Anionic and non-ionic surface active agents--Determination of the critical micellization concentration--Method by measuring surface tension with ring
GB/T 1800.3-1998 Limits and fits--Bases--Part 3: Numerical values tables of standard toleranes and fundamental deviations
GB/T 1800.2-2009 Geometrical Product Specifications (GPS) Limits and fits--Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 11276-1989 Cationic surface active agents(hydrochlorides and hydrobromides)--Determination of critical micellization concentration--Method by measurement of counter ion activity

RU-GOST R, critical range table

GOST 19656.14-1979 Semiconductor microwave switching diodes. Measurement method of critical frequency
GOST 18604.9-1982 Transistors bipolar. Methods for determining cut-off frequency and transition frequency
GOST 2.308-1979 Unified system for design documentation. Representation of limits of forms and surface lay-out on drawings
GOST R 54108-2010 Vacuum equipment. Vapour vacuum pumps. Measurement of performance characteristics. Part 2. Measurement of ultimate pressure and critical backing pressure
GOST 23542-1979 Cables and wire bundles for device connections. Series of length limit deviations
GOST 25347-2013 Basic norms of interchangeability. Geometrical product specifications. System for tolerances on linear sizes. Series of tolerances, limit deviations for holes and shafts

ESDU - Engineering Sciences Data Unit, critical range table

ESDU 66031 C-1995 Introductory sheet on subcritical lift-dependent drag of wings.
ESDU 75027-1975 Critical pressure coefficient and component of local Mach number normal to the surface isobar for a swept wing.
ESDU 78010-1978 The lift achievable by aerofoils having a particular form of supercritical upper-surface pressure distribution that yields only small wave drag.

Korean Agency for Technology and Standards (KATS), critical range table

KS D 0269-2020 Potentiostatic polarization test method for determination of critical pitting temperature for stainless steels
KS D 0269-2009 Potentiostatic polarization test method for determination of critical pitting temperature for stainless steels
KS B ISO 286-2:2009 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2014 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2015 Geometrical product specifications(GPS) — ISO code system fortolerances on linear sizes — Part 2: Tables of standard toleranceclasses and limit deviations for holes and shafts
KS M ISO 4311-2003(2018) Anionic and non-ionic surface active agents－Determination of the critical micellization concentration－Method by measuring surface tension with a plate, stirrup or ring
KS M ISO 4311:2003 Anionic and non-ionic surface active agents－Determination of the critical micellization concentration－Method by measuring surface tension with a plate, stirrup or ring
KS L ISO 13788:2008 Hygrothermal performance of building components and building elements-Internal surface temperature to avoid critical surface humidity and interstitial condensation-Calculation methods
KS L ISO 13788:2014 Hygrothermal performance of building components and building elements — Internal surface temperature
KS B ISO 286-2:2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
KS M ISO 6840:2003 Cationic surface active agents(hydrochlorides and hydrobromides)-Determination of critical micellization concentration-Method by measurement of counter ion activity
KS M ISO 6840:2013 Cationic surface active agents(hydrochlorides and hydrobromides)－Determination of critical micellization concentration－Method by measurement of counter ion activity
KS M ISO 6840-2003(2008) Cationic surface active agents(hydrochlorides and hydrobromides)－Determination of critical micellization concentration－Method by measurement of counter ion activity

British Standards Institution (BSI), critical range table

BS EN 828:1998 Adhesives. Wettability. Determination by measurement of contact angle and critical surface tension of solid surface
BS EN ISO 6284:1999 Construction drawings - Indication of limit deviations
BS EN 17435:2021 Surfaces for sports areas. Test method for the determination of Head Injury Criterion (HIC) and Critical Fall Height (CFH)
BS EN ISO 13788:2012 Hygrothermal performance of building components and building elements. Internal surface temperature to avoid critical surface humidity and interstitial condensation. Calculation methods
BS EN ISO 286-2:1990 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
19/30395767 DC BS EN 17435. Surfaces for sports areas. Test method for the determination of Head Injury Criterion (HIC) and Critical Fall Height (CFH)
BS EN ISO 286-2:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS EN ISO 19403-4:2020 Paints and varnishes. Wettability - Determination of the polar and dispersive fractions of the surface tension of liquids from an interfacial tension

Association Francaise de Normalisation, critical range table

NF P02-023*NF EN ISO 6284:1999 Construction drawings. Indication of limit deviations.
NF E03-504:1970 ISO miniature screw threads.tolerances.tables for limits of sizes.
NF E02-100-2:1993 Iso system of limites and fits. Part 2 : tables of standard tolerance grades and limit deviations for holes and shafts.
NF T73-424*NF EN 13955:2003 Surface active agents - Determination of Krafft point and solubility of ionic surface active agents.
NF P90-158*NF EN 17435:2021 Surfaces for sports areas - Test method for the determination of Head Injury Criterion (HIC) and Critical Fall Height (CFH)
NF EN ISO 13788:2013 Performance hygrothermique des composants et parois de bâtiments - Température superficielle intérieure permettant d'éviter l'humidité superficielle critique et la condensation dans la masse - Méthodes de calcul
NF A91-424:1988 Surface treatments - Anodized aluminium and aluminium alloys - Determination of colour and colour difference of coloured anodic coatings
NF T73-411:1980 Anionic and non-ionic surface active agents. Determination of the critical micellization concentration. Method by measuring surface tension with a plate, stirrup or ring.
NF E02-100-2*NF EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2 : tables of standard tolerance classes and limit deviations for holes and shafts.
NF P50-766*NF EN ISO 13788:2013 Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods
NF EN IEC 61788-7:2020 Supraconductivité - Partie 7 : mesurages des caractéristiques électroniques - Résistance de surface des supraconducteurs haute température critique aux hyperfréquences
NF M60-441*NF ISO 27468:2011 Nuclear criticality safety - Evaluation of systems containing PWR UOX fuels - Bounding burnup credit approach.
NF EN ISO 286-2:2010 Spécification géométrique des produits (GPS) - Système de codification ISO pour les tolérances sur les tailles linéaires - Partie 2 : tableaux des classes de tolérance normalisés et des écarts limites des alésages et des arbres
NF T73-414:1983 Surface active agents. Cationic surface active agents (hydrochlorides and hydrobromides). Determination of critical micellization concentration. Method by measurement of counter ion activity.
NF E03-055:1982 METRIC TRIANGULAR SCREW THREADS ISO SCREW THREAD TOLERANCE SYSTEM. LIMITS OF SIZES TABLES FOR DIAMETERS 40 TO 100 MM.
NF EN IEC 61788-17:2021 Supraconductivité - Partie 17 : mesurages de caractéristiques électroniques - Densité de courant critique local et sa distribution dans les films supraconducteurs de grande surface

Standard Association of Australia （SAA）, critical range table

AS 1654.2:1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts

VN-TCVN, critical range table

TCVN 2245-1999 ISO system of limits and fits.Tables of standard tolerance grades and limit deviations for holes and shafts

AT-ON, critical range table

ONORM ISO 286 Teil.2:1990 ISO System oflimits andfits; tables of Standard tolerance grades and limit deviations for holes and shafts
ONORM EN 20286-2-1993 ISO System of limits and fits - Part 2: Tables of Standard tolerance grades and limit deviations for holes and shafts (ISO 286-2:1988)

European Committee for Standardization (CEN), critical range table

prEN 828-1992 Adhesives; wettability; determination by measurement of contact angle and critical surface tension of solid surface
EN ISO 6284:1999 Construction Drawings - Indication of Limit Deviations ISO 6284:1996
EN 20286-2:1993 ISO System of Limits and Fits - Part 2: Tables of Standard Tolerance Grades and Limit Deviations for Holes and Shafts ISO 286-2 : 1988
EN 828:1997 Adhesives - Wettability - Determination by Measurement of Contact Angle and Critical Surface Tension of Solid Surface
FprEN 17435-2021 Surfaces for sports areas - Test method for the determination of Head Injury Criterion (HIC) and Critical Fall Height (CFH)
prEN 20286-2-1992 ISO system of limits and fits; part 2: tables of standard tolerance grades and limit deviations for holes and shafts (ISO 286-2:1988)
EN ISO 13788:2012 Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2012)
EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

NL-NEN, critical range table

NEN-ISO 286-2:1989 ISO-passingstelsel. Deel 2: Tabellen met standaardtolerantiekwaliteiten en grensmaatafwijkingen voor gaten en assen

International Organization for Standardization (ISO), critical range table

ISO 286-2:1988/Cor 1:2006 ISO system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts; Technical Corrigendum 1
ISO 286-2:1988 ISO system of limits and fits; part 2: tables of standard tolerance grades and limit deviations for holes and shafts
ISO 286-2:2010/cor 1:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts; Technical Corrigendum 1
ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
ISO 13788:2001 Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods
ISO 13788:2012 Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods
ISO 4311:1979 Anionic and non-ionic surface active agents; Determination of the critical micellization concentration; Method by measuring surface tension with a plate, stirrup or ring
ISO 6840:1982 Cationic surface active agents (Hydrochlorides and hydrobromides); Determination of critical micellization concentration; Method by measurement of counter ion activity

ZA-SANS, critical range table

SANS 286-2:1988 ISO system of limits and fits Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts

未注明发布机构, critical range table

BS EN 20286-2:1993(2002) ISO system of limits and fits — Part 2 : Tables of standard tolerance grades and limit deviations for holes and shafts
DIN EN ISO 13788:2001 Thermal and moisture-related behavior of components and components Room-side surface temperature to avoid critical surface moisture and condensation inside the component Calculation method
BS EN ISO 286-2:2010(2013) Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 2 : Tables of standard tolerance classes and limit deviations for holes and shafts

Lithuanian Standards Office , critical range table

LST EN 828-2000 Adhesives - Wettability - Determination by measurement of contact angle and critical surface tension of solid surface
LST EN ISO 13788:2013 Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2012)
LST EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

ANS - American Nuclear Society, critical range table

8.1 ERTA- Nuclear Criticality Safety in Operations with Fissionable Materials Outside Reactors (Errata to 1998 R2007)

BE-NBN, critical range table

NBN T 63-129-1980 Anionic and non-ionic surface active agents - Dermination of the critical micellization concentration - Method by measuring surface tension with a plate, stirrup or ring
NBN T 63-152-1983 Cationic surface active agents (hydrochlorides and hydrobromides) - Determination of critical micellization concentration - Method by measurement of counter ion activity

German Institute for Standardization, critical range table

DIN ISO 286-2:1990 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988
DIN EN 17435:2022 Surfaces for sports areas - Test method for the determination of Head Injury Criterion (HIC) and Critical Fall Height (CFH)
DIN EN 17435:2022-08 Surfaces for sports areas - Test method for the determination of Head Injury Criterion (HIC) and Critical Fall Height (CFH); German version EN 17435:2021
DIN EN 17435:2019 Surfaces for sports areas - Test method for the determination of Head Injury Criterion (HIC) and Critical Fall Height (CFH); German and English version prEN 17435:2019
DIN EN ISO 13788:2013-05 Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2012); German version EN ISO 13788:2012
DIN EN ISO 286-2:2019-09 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013); German version EN ISO 286-2:2010 + AC:2013
DIN EN ISO 286-2:2019 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013) (includes Corrigendum :2013)

GB-REG, critical range table

REG NACA ARR 3K04-1943 Charts for Calculation of the Critical Stress for Local Instability of Columns with I-, Z-, channel, and Rectangular-Tube Section
REG NACA-ARR-L4H29-1944 CHARTS FOR CALCULATING THE CRITICAL COMPRESSIVE STRESS FOR LOCAL INSTABILITY OF IDEALIZED WEB - AND T-STIFFENED PANELS

ANSI - American National Standards Institute, critical range table

X3.51-1975 REPRESENTATIONS OF UNIVERSAL TIME@ LOCAL TIME DIFFERENTIALS@ AND UNITED STATES TIME ZONE REFERENCES FOR INFORMATION INTERCHANGE

Japanese Industrial Standards Committee (JISC), critical range table

JIS B 0401-2 ERRATUM 1:2002 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts (Erratum 1)
JIS B 0401-2:2016 Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

ES-UNE, critical range table

UNE-EN 17435:2022 Surfaces for sports areas - Test method for the determination of Head Injury Criterion (HIC) and Critical Fall Height (CFH)
UNE-EN ISO 13788:2016 Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2012, Corrected version 2020-05)
UNE-EN ISO 286-2:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)

Professional Standard - Aviation, critical range table

HB 8233-2002 Limit deviations of size and requirements of surface roughness for rubber parts

Danish Standards Foundation, critical range table

DS/EN ISO 13788:2013 Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods
DS/EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/EN ISO 286-2/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

KR-KS, critical range table

KS M ISO 4311-2003(2023) Anionic and non-ionic surface active agents－Determination of the critical micellization concentration－Method by measuring surface tension with a plate, stirrup or ring
KS B ISO 286-2-2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

AENOR, critical range table

UNE 55700:1982 SURFACE ACTIVE AGENTS. ANIONIC AND NON-IONIC SURFACE ACTIVE AGENTS. DETERMINATION OF THE CRITICAL MICELLIZATION CONCENTRATION. METHOD BY MEASURING SURFACE TENSION WITH A PLATE, STIRRUP OR RING
UNE 55802:1985 SURFACE ACTIVE AGENTS. CATIONIC SURFACE ACTIVE AGENTS (HYDROCHLORIDES AND HYDROBROMIDES). DETERMINATION OF CRITICAL MICELLIZATION CONCENTRATION. METHOD BY MEASUREMENT OF COUNTER ION ACTIVITY
UNE-EN ISO 286-2:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

TH-TISI, critical range table

TIS 1765-1999 Anionic and non.ionic surface active agents.determination of the critical micellization concentration.method by measuring surface tension with a plate, stirrup or ring

国家市场监督管理总局、中国国家标准化管理委员会, critical range table

GB/T 1800.2-2020 Geometrical product specifications (GPS)—ISO code system for tolerances on linear sizes—Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts