ZH
RU
ES

one-time standard addition

one-time standard addition, Total:78 items.

In the international standard classification, one-time standard addition involves: Microbiology, Medical equipment, Acoustics and acoustic measurements, Refractories, Optoelectronics. Laser equipment, Elements of buildings, Protection of and in buildings, Paper products, Packaging and distribution of goods in general, Paints and varnishes, Analytical chemistry, Floor treatment appliances, Construction materials, Glass, Rubber and plastics products, Quality, Testing of metals, Plastics, Corrosion of metals, Lubricants, industrial oils and related products, Non-ferrous metals, Metrology and measurement in general, Vibrations, shock and vibration measurements, Adhesives, Measurement of volume, mass, density, viscosity, Environmental protection, Radiation protection, Ergonomics, Structures of buildings.

American Society for Testing and Materials (ASTM), one-time standard addition

ASTM E3251-23 Standard Test Method for Microbial Ingress Testing on Single-Use Systems
ASTM E3251-20 Standard Test Method for Microbial Ingress Testing on Single-Use Systems
ASTM F2847-17 Standard Practice for Reporting and Assessment of Residues on Single-Use Implants and Single-Use Sterile Instruments
ASTM E1106-07 Standard Test Method for Primary Calibration of Acoustic Emission Sensors
ASTM F2847-10 Standard Practice for Reporting and Assessment of Residues on Single Use Implants
ASTM C113-02 Standard Test Method for Reheat Change of Refractory Brick
ASTM C113-02(2008) Standard Test Method for Reheat Change of Refractory Brick
ASTM C113-14 Standard Test Method for Reheat Change of Refractory Brick
ASTM C210-95(2007)e1 Standard Test Method for Reheat Change of Insulating Firebrick
ASTM C210-95(2014) Standard Test Method for Reheat Change of Insulating Firebrick
ASTM E1362-15(2019) Standard Test Methods for Calibration of Non-Concentrator Photovoltaic Non-Primary Reference Cells
ASTM E2964-14 Standard Test Method for Measurement of the Normalized Insertion Loss of Doors
ASTM F597-83(2008) Standard Practice for Evaluation of One-Time Carbon Paper in Carbon-Interleaved Business Forms by Use of an Electric Typewriter
ASTM E3336-22 Standard Test Method for Physical Integrity Testing of Single-Use Systems
ASTM D4334-99 Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
ASTM F597-83(2003) Standard Practice for Evaluation of One-Time Carbon Paper in Carbon-Interleaved Business Forms by Use of an Electric Typewriter
ASTM F494-05(2016) Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM C1579-06 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
ASTM C1351M-96(2012) Standard Test Method for Measurement of Viscosity of Glass Between 10⁴ Pamiddot;s and 10⁸ Pamiddot;s by Viscous Compression of a Solid Right Cylinder [Metric]
ASTM F494-93(1998) Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM F494-05 Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM F494-93(2004) Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM F494-05(2022) Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
ASTM D1938-06 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D1938-02 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D1938-94 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D1938-08 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM E122-09 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
ASTM D4273-18 Standard Test Methods for Polyurethane Raw Materials Determination of Primary Hydroxyl Content of Polyether Polyols
ASTM D7095-23 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM D1403-10 Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
ASTM D7095-04(2014) Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM D7095-04 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM D7095-04(2009) Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM D1938-14 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
ASTM D7095-17 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
ASTM F2182-02a Standard Test Method for Measurement of Radio Frequency Induced Heating Near Passive Implants During Magnetic Resonance Imaging
ASTM F2182-02 Standard Test Method for Measurement of Radio Frequency Induced Heating Near Passive Implants During Magnetic Resonance Imaging
ASTM F2182-09 Standard Test Method for Measurement of Radio Frequency Induced Heating Near Passive Implants During Magnetic Resonance Imaging
ASTM E2180-18 Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials
ASTM E2180-07(2017) Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials
ASTM D3434-00(2018) Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
ASTM F2182-19 Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging
ASTM F2182-19e1 Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging
ASTM F2182-19e2 Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging
ASTM E319-85(1997) Standard Practice for the Evaluation of Single-Pan Mechanical Balances
ASTM E3199-22a Standard Guide for Alternative Allocation Approaches to Modeling Input and Output Flows of Secondary Materials and Related Recycling Scenarios in Life Cycle Assessment
ASTM E3199-22 Standard Guide for Alternative Allocation Approaches to Modeling Input and Output Flows of Secondary Materials and Related Recycling Scenarios in Life Cycle Assessment
ASTM D4674-02 Standard Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Fluorescent Lighting and Window-Filtered Daylight
ASTM D4674-02a(2010) Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
ASTM F2547-06 Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment
ASTM F2547-06(2013) Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment
ASTM F2547-18 Standard Test Method for Determining the Attenuation Properties in a Primary X-ray Beam of Materials Used to Protect Against Radiation Generated During the Use of X-ray Equipment
ASTM F2381-10 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
ASTM F2371-10 Standard Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Manikin
ASTM G109-21 Standard Test Methods for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM G109-23 Standard Test Methods for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM E1573-18 Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels
ASTM E1573-22 Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels
ASTM E1573-02 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
ASTM E1573-93(1998) Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
ASTM F2381-04 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy

(U.S.) Ford Automotive Standards, one-time standard addition

FORD ESE-M99C101-A-2004 OIL, MINERAL - INITIAL FILL GASOLINE ADDITIVE ***TO BE USED WITH FORD WSS-M99P1111***
FORD ESE-M99C101-A-2009 OIL, MINERAL - INITIAL FILL GASOLINE ADDITIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M3B78-A1-2003 PHOSPHATE SOLUTION, ZINC, INTERNALLY ACCELERATED, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M8B18-A-2006 ADDITIVE, ANTI FREEZE, WINDSHIELD WASHER, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***

Japanese Industrial Standards Committee (JISC), one-time standard addition

JIS K 5601-5-2:2008 Testing methods for paint components -- Part 5: Determination of volatile organic compound (VOC) content in paints -- Section 2: Water-based paints (Multiple standard addition method)

IX-FAO, one-time standard addition

CODEX STAN 151-1989,Rev.1-1995(Ch) Codex Alimentarius Standard GARI (a food made from cassava)
CODEX STAN 151-1985(En) Codex Alimentarius Standard GARI (a food made from cassava)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, one-time standard addition

GB/T 25934.2-2010 Methods for chemical analysis of high purity gold.Part 2: Inductively coupled plasma mass spectrometry standard enter emendation-inner standard method.Determination of impurity elements contents

Korean Agency for Technology and Standards (KATS), one-time standard addition

KS D ISO 18114-2005(2020) Surface chemical analysis－Secondary-ion mass spectrometry－Determination of relative sensitivity factors from ion-implanted reference materials

IN-BIS, one-time standard addition

IS 1528 Pt.7-1974

RU-GOST R, one-time standard addition

GOST R 8.815-2013 State system for ensuring the uniformity of measurements. Secondary standarts of the units of length, velocity and acceleration by vibration of a solid body. Technique of comparisons

Canadian Standards Association (CSA), one-time standard addition

CAN/CSA-A123.24-2015 Standard test method for wind resistance of modular vegetated roof assembly (First Edition; Update No. 1: September 2015)
CAN/CSA-Z243.200-1992 Canadian Keyboard Standard for the EngZish and French Languages (Second Edition; General Instruction No. 1: January 1992)

European Telecommunications Standards Institute (ETSI), one-time standard addition

ETSI TR 133 901-2001 Universal Mobile Telecommunications System (UMTS); 3G Security - Criteria for Cryptographic Algorithm Design Process (3G TR 33.901 Version 4.0.0 Release 4)

American National Standards Institute （ANSI), one-time standard addition

BS EN 1860-4:2023 Appliances, solid fuels and firelighters for barbecuing Single use barbecues burning solid fuels. Requirements and test methods (British Standard)

German Institute for Standardization, one-time standard addition

DIN 38409-15:1987-06 German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H); determination of hydrogen peroxide and its adducts (H 15)