ZH
RU
ES

Plastic Aging Test Chamber

Plastic Aging Test Chamber, Total:429 items.

In the international standard classification, Plastic Aging Test Chamber involves: Plastics, Standardization. General rules, Analytical chemistry, Products of the textile industry, Insulating materials, Electrical wires and cables, Energy and heat transfer engineering in general, Environmental protection, Construction materials, Rubber and plastics products, Cellular materials, Reinforced plastics, Protection against dangerous goods, Packaging and distribution of goods in general, Internal combustion engines for road vehicles, Thermodynamics and temperature measurements, Non-destructive testing, Pipeline components and pipelines, Paints and varnishes, Air quality, Rubber, Environmental testing, Protection of and in buildings, Adhesives, Manufacturing processes in the rubber and plastics industries, Materials for aerospace construction, Seals, glands, Insulating fluids, Leather technology, Wood, sawlogs and sawn timber, Lighting, Mining and quarrying, Agricultural machines, implements and equipment, Surface treatment and coating, Paper products, Waxes, bituminous materials and other petroleum products, Road vehicles in general, Iron and steel products, Raw materials for rubber and plastics, Cases. Boxes. Crates, Construction industry, Paint ingredients, Fluid storage devices, Road engineering, Freight distribution of goods, Textile fibres, Electricity. Magnetism. Electrical and magnetic measurements.

Korean Agency for Technology and Standards (KATS), Plastic Aging Test Chamber

KS M 3071-2004 Plastics􀫥Determination of thermal stability of thermoplastics􀫥Oven method
KS M ISO 1419:2008 Rubber- or plastics-coated fabrics－Accelerated-ageing tests
KS M ISO 1419:2018 Rubber- or plastics-coated fabrics — Accelerated-ageing tests
KS K 0856-2006 Rubber-or plastics-coated fabrics－Accelerated-ageing tests
KS K 0856-2010 Rubber-or plastics-coated fabrics－Accelerated-ageing tests
KS R 1123-2004 Test methods of fuel tanks made of plastic material for passenger car
KS R 1123-2014(2019) Test methods of plastic fuel tanks for passenger car
KS M ISO 11561-2009(2019) Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS R 1123-2014 Test methods of plastic fuel tanks for passenger car
KS M ISO 188:2009 Rubber, vulcanized or thermoplastic-Accelerated ageing and heat resistance tests
KS M ISO 188:2014 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
KS M ISO 188-2014(2019) Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
KS C IEC 60811-401:2020 Electric and optical fibre cables — Test methods for non-metallic materials — Part 401: Miscellaneous tests —Thermal ageing methods — Ageing in an air oven
KS T 1352-2016 Returnable transport packaging — Testing for plastic boxes
KS C IEC 60811-412:2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS M ISO 2810:2011 Paints and varnishes－Natural weathering of coatings－Exposure and assessment
KS C IEC 60811-412-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS M ISO 11561:2009 Ageing of thermal insulation materials－Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
KS M 3015-2003 Testing methods for thermosetting plastics
KS M ISO 2440:2002 Flexible and rigid cellular polymeric materials-Accelerated ageing tests
KS M ISO 2440:2017 Flexible and rigid cellular polymeric materials－Accelerated ageing tests
KS K 0704-2006 Test method for color fastness of dyed goods to acceleratedweathering：Xenon arc lamp method
KS D 8513-2003 Test method for compressive properties of fiber reinforced metals
KS M 3083-1994 Testing method for chemical resistance of fiber reinforced plastics
KS M 3083-2014 Testing method for chemical resistance of fiber reinforced plastics
KS M 3083-2004(2009) Testing method for chemical resistance of fiber reinforced plastics
KS M ISO 16053:2011 Paints and varnishes-Coating materials and coating systems for exterior wood-Natural weathering test
KS M ISO 16053:2016 Paints and varnishes－Coating materials and coating systems for exterior wood－Natural weathering test
KS M 3026-2011 Testing methods for yellowness index and change of yellowness index of plastics
KS M 3026-1980 Testing methods for yellowness index and change of yellowness index of plastics
KS M 3059-2008 Test method for brittleness temperature of plastics and elastomers by impact
KS M 6676-2008 Rubber, vulcanized or thermoplastic－Determination of low temperature properties
KS M 3059-1993 Test method for brittleness temperature of plastics and elastomers by impact
KS M 3046-2019 Testing methods for chemical resistance of plastics under constant tensile deformation
KS C IEC 60216-1:2008 Electrical insulating materials－Properties of thermal endurance－Part 1：Ageing procedures and evaluation of test results
KS C IEC 60216-1:2019 Electrical insulating materials — Thermal endurance properties — Part 1: Ageing procedures and evaluation of test results

(U.S.) Ford Automotive Standards, Plastic Aging Test Chamber

FORD FLTM BO 001-2-2001 PLASTICS - TEST FOR AGING IN GASOLINE
FORD FLTM BO 001-02-2001 PLASTICS - TEST FOR AGING IN GASOLINE
FORD FLTM BO 101-06-2001 ADHESION STRENGTH OF COEXTRUDED BLOW MOLDED PLASTIC FUEL TANK MATERIAL BY T-PEEL TEST METHOD
FORD FLTM EU-BO 060-01-2001 HYDROLYSIS RESISTANCE OF THERMOPLASTIC MOULDING COMPOUNDS (EXTRACTION-HYDROLYSIS-OXIDATION TEST, EHO-TEST)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Plastic Aging Test Chamber

GB/T 7141-2008 Plastics.Methods of heat aging
GB/T 33873-2017(英文版) Test method of energy efficiency for hot aging test oven
GB/T 24135-2022 Rubber- or plastics-coated fabrics—Accelerated-ageing tests
GB/T 24135-2009 Rubber or plastics-coated fabrics.Accelerated-ageing tests
GB/T 2573-2008 Test method for aging properties of glass fiber reinforced plastics
GB/T 29365-2012 Wood-Plastic Composite (WPC).Test methods of artificial weathering
GB/T 22411-2008 Test method of antiaging for plastic woven packaging of dangerous goods
GB/T 3681-2011 Plastics. Methods of exposure to direct weathering,to weathering using glass-filtered daylight,and to intensified weathering by daylight using Fresnel mirrors
GB/T 18244-2000 Test methods for resistance to weathering of building water proofing materials
GB/T 18244-2022 Test methods for weathering resistance of building waterproof materials
GB/T 32710.11-2016 Safety requirements for environmental testing and conditioning equipment.Part 11:Heat aging test chambers
GB/T 15750-1995 Test program for the ageing properties of piezoelectric ceramics
GB/T 14522-2008 Artificial weathering test method for plastics,coating and rubber materials used for machinery industrial products.Fluorescent UV lamps
GB/T 14274-2003 Polymeric materials cellular flexible--Accelerated ageing tests
GB/T 3512-2014 Rubber, vulcanized or thermoplastic.Accelerated ageing and heat resistance tests.Air-oven method
GB/T 3511-2001 Rubber,vulcanized and thermoplastic the test method of resistance to direct natural weathering
GB/T 3512-2001 Rubber,vulcanized or thermoplastic--Accelerated ageing and heat resistance tests-Air-oven method
GB/T 16259-2008 Test method for in accel erated weathering building materials
GB/T 9640-1988 Polymeric materials, Cellular flexible--Accelerated ageing tests
GB/T 9871-2008 Rubber,vulcanized or thermoplastic.Determination of aging characteristics by measurement of stress relaxation
GB/T 5470-1985 Test method for brittleness temperature of plastics by impact
GB/T 9640-2008 Flexible and rigid cellular polymeric meterials.Accelerated ageing tests
GB/T 12027-1989 Test method for dimensional stability of plastic films
GB/T 31881-2015 Accelerated weathering test methods of automotive nonmetal components and materials using a fluorescent UV and condensation apparatus
GB/T 16259-1996 Test method for color changes in accelerated weathering of building materials
GB/T 2951.2-1997 Common test methods for insulating and sheating materials of electric cables. Part 1: Methods for general application. Section two: Thermal ageing methods
GB/T 2951.12-2008 Common test methods for insulating and sheathing materials of electric and optical cables.Part 12:Methods for general application.Thermal ageing methods
GB/T 5472-1985 Test method for rectangular flow cure properties of thermosetting moulding compounds

Taiwan Provincial Standard of the People's Republic of China, Plastic Aging Test Chamber

CNS 12627-1989 General Rules for Tests for Thermal Ageing Properties of Thermoplastics in the Form of Sheet by Means of Ovens
CNS 8160-1981 Method of Test for Beauty Case (Toilet Case)
CNS 11651-1986 Method of Test for Glassfiber Reinforced Plastic Electric Enclosure
CNS 13786-1996 Method of Test for Brittleness Temperature of Plastics
CNS 13556-1995 Method of Test for Flexural Properties of Carbon Fiber Reinforced Plastics
CNS 13555-1995 Method of Test for Tensile Properties of Carbon Fiber Reinforced Plastics
CNS 13558-1995 Method of Test for Comppressive Properties of Carbon Fiber Reinforced Plastic
CNS 13559-1995 Method of Test for Apprent Interlaminar Shear Strength of Carbon Fiber Reinforced Plastics

GM North America, Plastic Aging Test Chamber

GM GM9504P-2003 Oven Aging Test Procedure for Painted Plastic Substrates
GM GM9059P-1988 Test for Thermal-Oxidative Stability Characteristics of Plastics
GM GM9300P-2001 Impact Test for Plastic Materials (Instrumented or Non-Instrumented)

Professional Standard - Machinery, Plastic Aging Test Chamber

JB/T 7444-1994 Air heat-up ageing tests box
JB/T 7444-2018 Air heat-up ageing tests box
JB/T 4278.6-1993 Rubber plastic wire and cable test equipment verification method natural ventilation thermal aging test chamber
JB/T 4278.9-1993 Rubber plastic wire and cable test equipment verification method Oxygen bomb, air bomb aging test chamber
JB/T 4278.6-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 6: Natural ventilation thermal aging test oven
JB/T 4278.9-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 9: Oxygen bomb, air bomb aging test oven
JB/T 4278.13-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 13: Forced air heat aging test oven
JB/T 4278.8-1993 Rubber plastic wire and cable test equipment verification method low temperature test chamber
JB/T 4278.8-2011 Verification procedure for test equipment of rubber plastic wire and cable.Part 8: Low temperature test oven

British Standards Institution (BSI), Plastic Aging Test Chamber

BS EN 12280-1:1998 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Heat ageing
BS EN 60811-401:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
BS EN 12280-3:2002 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Environmental ageing
BS EN 12280-2:2002 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Physical ageing: effect of light or weathering
BS ISO 188:2023 Tracked Changes. Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
BS EN 60811-412:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb
BS EN 60811-401:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
16/30334056 DC BS ISO 1419. Rubber- or plastics-coated fabrics. Accelerated-ageing tests
BS ISO 11561:1999 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
BS ISO 188:2011 Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
BS ISO 23741:2021 Plastics. Determination of spray water delivery during spray cycles when using a xenon arc weathering test apparatus
BS 5173-106.2:1990 Methods of test for rubber and plastics hoses and hose assemblies - Environmental tests - General requirements for high temperature ageing tests
BS 2782-1 Method 131B:1983 Methods of testing plastics - Thermal properties - Determination of extensibility after heat ageing of flexible polyvinyl chloride sheet
20/30394043 DC BS ISO 23741. Plastics. Determination of spray water delivery during spray cycles when using a xenon arc weathering test apparatus
BS ISO 9370:2017 Tracked Changes. Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method
BS EN 14147:2003 Natural stone test methods - Determination of resistance to ageing by salt mist
BS 5173 Sec.106.2:1990 Methods of test for rubber and plastics hoses and hose assemblies. Environmental tests. General requirements for high temperature ageing tests
BS EN 2243-5:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Ageing tests
BS 2782 Pt.5 Method 541A:1978 Methods of testing plastics. Optical and colour properties. Determination of colour fastness to water
BS EN ISO 2440:2000 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
BS EN 14066:2013 Natural stone test methods. Determination of resistance to ageing by thermal shock
BS EN 14066:2003 Natural stone test methods - Determination of resistance to ageing by thermal shock
BS EN ISO 2440+A1:2000 Flexible and rigid cellular polymeric materials. Accelerated aging tests
BS EN ISO 2440:1999+A1:2010 Flexible and rigid cellular polymeric materials - Accelerated aging tests
BS EN 1296:2001 Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature
BS EN 60216-1:2013 Electrical insulating materials. Thermal endurance properties. Ageing procedures and evaluation of test results
BS 2782 Pt.5 Method 540A:1977 Methods of testing plastics. Optical and colour properties. Determination of resistance to change upon exposure under glass to daylight
BS EN 2743:2002 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials
BS EN 13117-2:2000 Transport packaging. Reusable, rigid plastics distribution boxes. General specifications for testing
BS EN 60216-1:2002 Guide for the determination of thermal endurance properties of electrical insulating materials - Ageing procedures and evaluation of test results
BS EN 1367-1:2007 Tests for thermal and weathering properties of aggregates - Determination of resistance to freezing and thawing
BS 2782-1 Methods 134A and 134B:1992 Methods of testing plastics - Thermal properties - Determination of the oxidation induction time of thermoplastics
BS EN 1903:2008 Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
BS EN 1903:2015 Adhesives. Test method for adhesives for plastic or rubber floor coverings or wall coverings. Determination of dimensional changes after accelerated ageing
BS PD CEN ISO/TR 18486:2017 Plastics. Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
BS EN 12697-45:2012 Bituminous mixtures. Test methods for hot mix asphalt. Saturation Ageing Tensile Stiffness (SATS) conditioning test
BS 2782-8 Method 830A:1999 Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals

CZ-CSN, Plastic Aging Test Chamber

CSN 34 7010 Cast.60-1972 Accelerated ageing teat of plastics coverings

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Plastic Aging Test Chamber

GB/T 33873-2017 Testing method of energy efficiency for hot aging test oven
GB/T 32088-2015 Accelerated weathering test methods of automotive nonmetal components and materials using a xenon-arc apparatus
GB/T 35804-2018 Rubber, vulcanized or thermoplastic－Resistance to ozone cracking－Test methods for determining the ozone concentration in laboratory test chambers

National Metrological Technical Specifications of the People's Republic of China, Plastic Aging Test Chamber

JJF 2051-2023 Calibration Specification for Ozone Aging Test Chambers

Group Standards of the People's Republic of China, Plastic Aging Test Chamber

T/ZZB 1079-2019 Xenon-arc sources aging resistance tester for plastics and their products
T/GDCKCJH 066-2022 Performance requirements and test methods for ozone aging test chambers
T/CSTM 00043.4-2018 Atmospheric corrosion test— Part 4: Exposure corrosion tests of polymeric materials
T/CECS 10106-2020 Natural aging test method for building reflective insulation materials Reflective insulation performance
T/CSRA 15.3-2021 Test method aging resistance of aramid fiber Ⅲ reinforced materials Part 3: Xenon lamp test method
T/CSRA 15.1-2021 Test method for aging resistance of aramid fiber Ⅲ reinforced materials Part 1: high temperature resistance test method
T/CSRA 15.4-2021 Test method for aging resistance of aramid fiber Ⅲ reinforced materials Part 4: salt spray resistance test method

Association Francaise de Normalisation, Plastic Aging Test Chamber

NF C32-011-401*NF EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: miscellaneous tests - Thermal ageing methods - Ageing in an air oven
NF G37-105-1*NF EN 12280-1:1998 Rubber- or plastic- coated fabrics. Accelerated ageing tests. Part 1 : heat ageing.
NF T56-117:1979 RUBBER OR PLASTIC CELLULAR PRODUCTS. ACCELERATED AGEING TESTS. RIGID AND FLEXIBLE CELLULAR PRODUCTS.
NF G37-105-3*NF EN 12280-3:2003 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3 : environnement ageing.
NF G37-105-2*NF EN 12280-2:2003 Rubber-or plastics-coated fabrics - Accelerated ageing tests - Part 2 : physical ageing : effect of light or weathering.
NF EN 60811-401/A1:2017 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 401 : essais divers - Méthodes de vieillissement thermique - Vieillissement en étuve à air
NF EN 60811-401:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 401 : essais divers - Méthodes de vieillissement thermique - Vieillissement en étuve à air
NF EN 12280-1:1998 Supports textiles revêtus de caoutchouc ou de plastique - Essais de vieillissement accéléré - Partie 1 : vieillissement à la chaleur.
NF R81-305:1982 Flexible cellular plastics with skin. Skin ageing test under artificial light (xenon lamps) for automobile construction.
NF C32-011-401/A1*NF EN 60811-401/A1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401 : miscellaneous tests - Thermal ageing methods - Ageing in an air oven
NF T30-056:1974 PAINTS. CONDUCT OF NATURAL WEATHERING TESTS.
NF T46-004:1985 Vulcanized or thermoplastic rubber. Accelerated ageing or heat resistance determination forced air oven test.
NF EN 12280-3:2003 Supports textiles revêtus de caoutchouc ou de plastique - Essais de vieillissement accéléré - Partie 3 : vieillissement dans un environnement réactif
NF T30-049:1985 Paints and varnishes. Cladding paints. Accelerated ageing test.
NF C26-202:1975 Méthodes d'essai des matières isolantes - Analyse statistique de données d'essais de vieillissement.
NF C32-011-412*NF EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
NF T48-109:1994 Asbestos and rubber compressed sheets for seals. Accelerated ageing test on oven.
NF EN 60811-412:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 412 : essais divers - Méthode de vieillissement thermique - Vieillissement dans une bombe à air
NF T56-117:2000 Flexible and rigid cellular polymeric materials - Accelerated ageing tests.
NF P18-653-2*NF EN 1367-2:2010 Tests for thermal and weathering properties of aggregates - Part 2 : magnesium sulphate test.
NF U51-158:1990 Agricultural drainage. Unplasticized PVC ringed pipes. Natural ageing test.
NF T46-005:1985 Vulcanized or thermoplastic rubber. Accelerated ageing resistance determination. Oxygen pressure test.
NF T46-006:1986 Vulcanized or thermoplastic rubber. Determination of accelerated ageing stability. Air pressure test.
NF T56-117*NF EN ISO 2440:2019 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
NF T51-198:1979 Plastics. Guidelines for rapid temperature variation tests.-.
NF L17-403*NF EN 2743:2002 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials.
NF EN 2743:2002 Série aérospatiale - Plastiques renforcés de fibres - Procédures normalisées pour le conditionnement avant essais sur matériaux non vieillis
NF C20-540:1990 ENVIRONMENTAL TESTING. TEST METHODS. CLIMATIC AGEING TEST OF EQUIPMENT AND SYNTHETIC MATERIALS FOR OUTDOOR USE.
NF EN 12280-2:2003 Supports textiles revêtus de caoutchouc ou de plastique - Essais de vieillissement accéléré - Partie 2 : effet de la lumière ou des intempéries
NF T56-117/A1:2010 Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 1.
NF T56-117/A2:2014 Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 2
NF L17-300-5*NF EN 2243-5:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5 : ageing tests.
NF EN 2243-5:2006 Série aérospatiale - Matériaux non-métalliques - Système d'adhésifs structuraux - Méthodes d'essai - Partie 5 : essais de vieillissement
NF T51-029*NF EN ISO 175:2011 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals
NF P18-653-4*NF EN 1367-4:2008 Tests for thermal and weathering properties of aggregates - Part 4 : determination of drying shrinkage
NF M88-326:1981 Road tankers in reinforced plastic. Chemical compatibility test.
NF T76-403:2008 Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing.
NF T76-403*NF EN ISO 22635:2019 Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
NF ISO 18766:2014 Caoutchouc vulcanisé ou thermoplastique - Essais à basses températures - Introduction générale et lignes directrices
NF EN 12877-3:1999 Matières colorantes dans les plastiques - Détermination de la stabilité de la couleur à la chaleur au cours de la mise en oeuvre des matières colorantes dans les plastiques - Partie 3 : détermination par essai à l'étuve
NF C26-301:2002 Electrical insulating materials - Properties of thermal endurance - Part 1 : ageing procedures and evaluation of test results.
NF EN 60216-1:2013 Matériaux isolants électriques - Propriétés d'endurance thermique - Partie 1 : méthodes de vieillissement et évaluation des résultats d'essai

International Electrotechnical Commission (IEC), Plastic Aging Test Chamber

IEC 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-401:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-401:2012/AMD1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven; Amendment 1
IEC 60811-401:2012+AMD1:2017 CSV Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
IEC 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results

Standard Association of Australia （SAA）, Plastic Aging Test Chamber

AS 4828.4:2008 Degradability of plastics - Methods of test - Test method for heat aging of degradable plastics
AS/NZS 1462.26:2003 Methods of test for plastics pipes and fittings - Determination of weathering resistance of plastics pipes for external storage
AS 1683.26:2001 Methods of test for elastomers - Rubber, vulcanizedor thermoplastic - Accelerated ageing and heat resistance tests
AS 4828.2:2008 Degradability of plastics - Methods of test - Determination of brittle point in plastic film using a tensile elongation test

European Committee for Standardization (CEN), Plastic Aging Test Chamber

EN 12280-1:1997 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
EN 12280-3:2002 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
EN 12280-2:2002 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: effect of light or weathering
EN 14147:2003 Natural stone test methods - Determination of resistance to ageing by salt mist
EN ISO 2440:2019 Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:2019)
CEN EN 1903-2008_ Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
EN 2743:2001 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials
EN 14066:2013 Natural stone test methods - Determination of resistance to ageing by thermal shock
EN 1903:2008 Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
EN 2243-5:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests
EN ISO 22635:2019 Adhesives - Test methods for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing (ISO 22635:2019)
EN ISO 2440:1999/A2:2014 Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 2 (ISO 2440:1997/AMD 2:2014)
EN ISO 2440:1999 Flexible and Rigid Cellular Polymeric Materials - Accelerated Ageing Tests Incorporates Amendment A1: 2010

Danish Standards Foundation, Plastic Aging Test Chamber

DS/EN 12280-1:1998 Rubber- or plastics-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
DS/EN 12280-3:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
DS/EN 12280-2:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: effect of light or weathering
DS/EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
DS/ISO 1419:1981 Fabrics coated with rubber or plastics — Accelerated ageing and simulated service tests
DS/EN 2743:2002 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials
DS/EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
DS/EN ISO 2440/A1:2010 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
DS/EN ISO 2440:2000 Flexible and rigid cellular polymeric materials - Accelerated ageing tests
DS/CEN/TS 14999:2013 Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container
DS/INSTA 216:1990 Plastics pipes. Thermoanalytic test methods for the determination on oxidation stability
DS/EN 12877-3:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test
DS/EN 2243-5:2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests
DS/EN 1903:2008 Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
DS/EN 12697-45:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test

Lithuanian Standards Office , Plastic Aging Test Chamber

LST EN 12280-1-2000 Rubber- or plastics- coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
LST EN 12280-3-2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
LST EN 12280-2-2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: effect of light or weathering
LST EN 2743-2002 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials
LST EN 60811-401-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven (IEC 60811-401:2012)
LST EN ISO 2440:2001 Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:1997)
LST EN 12877-3-2002 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test
LST EN 2243-5-2005 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests
LST EN 1903-2008 Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing
LST EN 12697-45-2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test

AENOR, Plastic Aging Test Chamber

UNE-EN 12280-1:1998 Rubber- or plastics- coated fabrics - Accelerated ageing tests - Part 1: Heat ageing
UNE-EN 12280-3:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing
UNE-EN 12280-2:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: effect of light or weathering
UNE-EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
UNE-EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
UNE-EN 1367-7:2015 Tests for thermal and weathering properties of aggregates - Part 7: Determination of resistance to freezing and thawing of Lightweight aggregates
UNE-EN 12877-3:2000 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test
UNE-EN 2243-5:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests
UNE-EN 12697-45:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test

German Institute for Standardization, Plastic Aging Test Chamber

DIN EN 12280-1:1998 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing; German version EN 12280-1:1997
DIN EN 12280-1:1998-01 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 1: Heat ageing; German version EN 12280-1:1997
DIN EN 12280-3:2002-11 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing; German version EN 12280-3:2002
DIN EN 12280-2:2002-11 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: Effect of light or weathering; German version EN 12280-2:2001
DIN EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven (IEC 60811-401:2012); German version EN 60811-401:2012
DIN EN 12280-3:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 3: Environmental ageing; German version EN 12280-3:2002
DIN 53383-2:1983 Testing of plastics; testing of oxidation stability by means of ageing in an oven; polyethylene of high density (PE-HD), infra red spectroscopic (IR) determination of the carbonyle content
DIN CEN/TS 14999:2013 Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container; German version CEN/TS 14999:2013
DIN EN 12280-2:2002 Rubber- or plastic-coated fabrics - Accelerated ageing tests - Part 2: Physical ageing: Effect of light or weathering; German version EN 12280-2:2001
DIN ISO 9370:2018 Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method (ISO 9370:2017); Text in German and English
DIN 52008:2006 Natural stone test methods - Assessment of the weathering resistance
DIN EN 2743:2003 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials; German and English version EN 2743:2001
DIN CEN/TS 14999:2013-08*DIN SPEC 16499:2013-08 Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container; German version CEN/TS 14999:2013
DIN EN 2743:2003-06 Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials; German and English version EN 2743:2001
DIN EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb (IEC 60811-412:2012); German version EN 60811-412:2012
DIN EN 12877-3:2000-01 Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 3: Determination by oven test; German version EN 12877-3:1999
DIN EN 1903:2008 Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing; English version of DIN EN 1903:2008-06
DIN EN 2243-5:2006 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests; German and English version EN 2243-5:2005
DIN EN 2243-5:2006-10 Aerospace series - Non-metallic materials - Structural adhesives - Test method - Part 5: Ageing tests; German and English version EN 2243-5:2005
DIN 53380-4:2006 Testing of plastics - Determination of gas transmission rate - Part 4: Carbon dioxide specific infrared absorption method for testing of plastic films and plastic mouldings
DIN 53757:1977 Testing of plastics articles; determination of the behaviour by stacking by long-time-test, boxes for transport and storage
DIN 55625-24:1999 Extenders for plastics - Part 24: Magnesium hydroxide; specifications and methods of test
DIN EN ISO 6603-2:2002-04 Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000); German version EN ISO 6603-2:2000 / Note: To be replaced by DIN EN ISO 6603-2 (2022-05).
DIN EN ISO 22635:2019 Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing (ISO 22635:2019)

VN-TCVN, Plastic Aging Test Chamber

TCVN 2229-2007 Rubber,vulcanized or thermoplastic.Accelerated ageing and heat resistance test

ES-AENOR, Plastic Aging Test Chamber

UNE 53-216-1991

Japanese Industrial Standards Committee (JISC), Plastic Aging Test Chamber

JIS A 1415:1994 Recommended practice for accelerated artificial exposure of plastics building materials
JIS B 7757:1995 Forced air circulation oven type thermal accelerated aging testers
JIS K 6404-12:1999 Testing methods for rubber-or plastics-coated fabrics -- Part 12: Accelerated ageing tests
JIS K 7363:1999 Plastics -- Instrumental determination of radiant exposure in weathering tests -- General guidance and basic test method
JIS K 7212:1995 General rules for tests for thermal ageing properties of thermoplastics in the form of sheet by means of ovens
JIS K 7206:1991 Testing method for Vicat softening temperature of thermoplastics
JIS A 1501:2021 Accelerated weathering test method for unplasticized polyvinyl chloride windows and doors by metal halide lamp
JIS K 6816:2008 Thermoplastics pipes and fittings -- Test method for Vicat softening temperature
JIS K 7114:2001 Plastics -- Methods of test for the determination of the effects of immersion in liquid chemicals
JIS K 6269 AMD 1:2011 Testing method of flammability using the oxygen index method for rubber, vulcanized or thermoplastic (Amendment 1)

International Organization for Standardization (ISO), Plastic Aging Test Chamber

ISO 1419:2018 Rubber- or plastics-coated fabrics - Accelerated-ageing tests
ISO 1419:1995 Rubber- or plastics-coated fabrics - Accelerated-ageing tests
ISO 1419:2019 Rubber- or plastics-coated fabrics — Accelerated-ageing tests
ISO 12091:1995 Structured-wall thermoplastics pipes - Oven test
ISO 1419:1977 Fabrics coated with rubber or plastics; Accelerated ageing and simulated service tests
ISO 188:2007 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO 2440:1983 Polymeric materials, cellular flexible; Accelerated ageing tests
ISO 11561:1999 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
ISO/TS 19022:2016 Plastics - Method of controlled acceleration of laboratory weathering by increased irradiance
ISO 188:1998/Cor 1:2003 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests; Technical Corrigendum 1
ISO 6914:2013 Rubber, vulcanized or thermoplastic.Determination of ageing characteristics by measurement of stress relaxation in tension
ISO 6914:2021 Rubber, vulcanized or thermoplastic - Determination of ageing characteristics by measurement of stress relaxation in tension
ISO 175:1999 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals
ISO/CD 2440 Flexible and rigid cellular polymeric materials — Accelerated ageing tests
ISO 2440:1997/Amd 2:2014 Flexible and rigid cellular polymeric materials - Accelerated ageing tests; Amendment 2
ISO 2440:1997/Amd 1:2010 Flexible and rigid cellular polymeric materials — Accelerated ageing tests — Amendment 1
ISO 16053:2010 Paints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test
ISO 16053:2018 Paints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test
ISO 16053:2004 Paints and varnishes - Coating materials and coating systems for exterior wood - Natural weathering test
ISO 3865:2020 Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material
ISO 22635:2019 Adhesives — Test methods for adhesives for plastic or rubber floor coverings or wall coverings — Determination of dimensional changes after accelerated ageing
ISO 18616-2:2016 Transport packaging - Reusable, rigid plastic distribution boxes - Part 2: General specifications for testing
ISO/TR 18486:2016 Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance
ISO 23706:2020 Plastics — Determination of apparent activation energies of property changes in standard weathering test methods

Professional Standard - Chemical Industry, Plastic Aging Test Chamber

HG/T 3049-1999 Rubber or plastics coated fabrics Accelerated ageing tests
HG/T 4767.3-2014 Pigment and extenders.Testing of colour stability to heat during processing in plastics.Part 3: By oven test
HG/T 3865-2006 Test method for rectangular flow cure properties of thermosetting moulding compounds

KR-KS, Plastic Aging Test Chamber

KS M ISO 1419-2018 Rubber- or plastics-coated fabrics — Accelerated-ageing tests
KS B 5345-1998(2023) Forced air circulation oven type thermal accerelated aging testers
KS T 1352-2023 Returnable transport packaging — Testing for plastic boxes
KS C IEC 60811-401-2020 Electric and optical fibre cables — Test methods for non-metallic materials — Part 401: Miscellaneous tests —Thermal ageing methods — Ageing in an air oven
KS C IEC 60811-412-2016 Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS M ISO 2440-2017 Flexible and rigid cellular polymeric materials－Accelerated ageing tests
KS M ISO 2440-2022 Flexible and rigid cellular polymeric materials — Accelerated ageing tests
KS F 2821-2018(2023) Standard test method for change in properties of plastic building materials resulting from weathering resistence
KS C IEC 60216-1-2019 Electrical insulating materials — Thermal endurance properties — Part 1: Ageing procedures and evaluation of test results

American Society for Testing and Materials (ASTM), Plastic Aging Test Chamber

ASTM D2126-15 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM D2126-99 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM D2126-04 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM D2126-09 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM F2018-00(2006) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F1164-97(2003) Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
ASTM F2018-00e1 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM D4364-02 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
ASTM D4364-05 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
ASTM D4364-94 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
ASTM D4364-13 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
ASTM D5744-07e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM F1164-97 Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
ASTM F1164-19 Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
ASTM D6819-02e1 Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus
ASTM D6819-02 Standard Test Method for Accelerated Temperature Aging of Printing and Writing Paper by Dry Oven Exposure Apparatus
ASTM D5744-13 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D5744-13e1 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D4798-01 Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798-00 Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D543-95(2001) Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
ASTM D543-95 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
ASTM D2290-19 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM D2290-19a Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM D2290-16 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM D1525-17 Standard Test Method for Vicat Softening Temperature of Plastics
ASTM C731-00(2006) Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
ASTM C732-95 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
ASTM C732-01 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
ASTM C731-00 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
ASTM C731-00(2010) Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
ASTM C732-06(2012) Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
ASTM C731-15 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
ASTM D5419-95 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
ASTM D5419-09 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
ASTM D1712-09 Standard Practice for Resistance of Plastics to Sulfide Staining
ASTM D4799-00 Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV and Condensation Method)
ASTM D1238-04 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-04a Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-04c Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-01e1 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1238-00 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1525-00 Standard Test Method for Vicat Softening Temperature of Plastics
ASTM D1525-07 Standard Test Method for Vicat Softening Temperature of Plastics
ASTM D1525-06 Standard Test Method for Vicat Softening Temperature of Plastics
ASTM D1525-09 Standard Test Method for Vicat Softening Temperature of Plastics
ASTM D4798/D4798M-11 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798/D4798M-11(2021) Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798-08 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798/D4798M-10 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM C792-04 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-04(2008) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-93(1998) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-15(2020) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C792-15 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM D1239-22 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
ASTM D4798-04 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
ASTM D4798/D4798M-09 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

Military Standard of the People's Republic of China-General Armament Department, Plastic Aging Test Chamber

GJB 17.6-1984 Test methods for aviation wires and cables Oven aging test

Professional Standard - Aerospace, Plastic Aging Test Chamber

QJ/Z 164.1-1986 Thermal aging test method for polymer materials Aging test guidelines
QJ/Z 164.2-1986 Data processing specification for thermal aging test method of polymer materials

European Committee for Electrotechnical Standardization（CENELEC）, Plastic Aging Test Chamber

EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb

ES-UNE, Plastic Aging Test Chamber

UNE-EN 60811-401:2012/A1:2018 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
UNE-EN 2743:2001 Aerospace series- Fibre reinforced plastics- Standard procedures for conditioning prior to testing unaged materials. (Endorsed by AENOR in February of 2002.)

Professional Standard - Electron, Plastic Aging Test Chamber

SJ/T 11855-2022 Photovoltaic UV aging test chamber irradiation performance test method

SE-SIS, Plastic Aging Test Chamber

SIS SS 3415-1987 Plastics pipes and fittings - Box loading test
SIS 16 92 15-1975 Flexible cellular materials. Accelerated ageing test

PT-IPQ, Plastic Aging Test Chamber

NP EN 12280-1-2000 Rubber-or plastic-coated fabrics. Accelerated ageing tests Part 1:Heat ageing

TR-TSE, Plastic Aging Test Chamber

TS 2007-1975 ACCELERATED AGEING AND S1MULATED SERV?CE TEST OF FABRICS COATED VVITH RUBBER OR PLASTICS
TS 2826-1977 FLEXIBLE CELLULAR MATERIALS ACCELERATED AGEING TESTS

未注明发布机构, Plastic Aging Test Chamber

BS ISO 11561:1999(2000) Ageing of thermal insulation materials — Determination of the long - term change in thermal resistance of closed - cell plastics (accelerated laboratory test methods)

HU-MSZT, Plastic Aging Test Chamber

RU-GOST R, Plastic Aging Test Chamber

GOST 9.708-1983 Unified system of corrosion and ageing protection. Plastics. Ageing test methods on exposure to natural and artificial climatic factors
GOST 9.706-1981 Unified system of corrosion and ageing protection. Polimer materials. Test methods for radiation ageing resistance
GOST 12020-2018 Plastics. Testing methods of plastics resistance to chemical substances
GOST ISO 188-2013 Vulcanized rubberand thermoplastics. Accelerated ageing and heat resistance tests
GOST 9.707-1981 Unified system of corrosion and ageing protection. Polymeric materials. Methods of accelerated climatic ageing test
GOST IEC 60811-401-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 401. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
GOST IEC 60811-412-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 412. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb
GOST 9.507-1988 Unified system of corrosion and ageing protection. Hermetic materials. Methods test
GOST R 57695-2017 Polymer composites. Test methods for aging of sandwich construction under wet and warm
GOST 12.4.262-2014 Occupational safety standards system. Materials for personal protection equipment with rubber-or plastics-coated fabrics. Accelerated-ageing test method
GOST R IEC 811-1-2-1994 Common test methods for insulating and sheathing materials of electric cables. Termal ageing methods
GOST 9.715-1986 Unified system of corrosion and ageing protection. Polymeric materials. Test methods for temperature shock resistance

ZA-SANS, Plastic Aging Test Chamber

SANS 54:2003 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
SANS 54:2009 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests

RO-ASRO, Plastic Aging Test Chamber

STAS 9676-1974 FLEXIBLE CELLULAR MATERIALS Test to accelerated ageing
STAS 10514/1-1991 DETERMINATION OF THERMAL RNDURANCE PROFERTIES OF ELECTRICAL INSULATING MATERIALS General guidelines for ageing and evaluation of test results

IT-UNI, Plastic Aging Test Chamber

Indonesia Standards, Plastic Aging Test Chamber

SNI ISO 188:2012 Rubber, vulcanized or thermoplastic – Accelerated ageing and heat resistance tests

GM Daewoo, Plastic Aging Test Chamber

GMKOREA EDS-T-7672-2011 Test Method for Resistance of Cellular Material to Heat Ageing
GMKOREA EDS-T-7532-2011 Test Method for the Resistance to Environmental Stress-Cracking of Plastic Fuel Tank Raw Material
GMKOREA EDS-T-7671-2011 Test Method for Resistance of Cellular and Related Materials to Humidity Ageing
GMKOREA EDS-T-7649-2012 Test Method for Determining the Heat Ageing Resistance of Upholstery Trim Materials ??? ???? ?? ??? ?? ?? Version 4; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14124

Professional Standard - Petrochemical Industry, Plastic Aging Test Chamber

SH/T 1542-2023 Plastics — Determination of thermal oxidative stability for polypropylene and propylene -copolymers in air — Oven method

国家市场监督管理总局、中国国家标准化管理委员会, Plastic Aging Test Chamber

GB/T 3681.2-2021 Plastics—Methods of exposure to solar radiation—Part 2: Direct weathering and exposure behind window glass
GB/T 41203-2021 Method for accelerated aging test of PV module encapsulating material

JSAE - Society of Automotive Engineers of Japan@ Inc., Plastic Aging Test Chamber

JASO T905-1999 Motorcycles - Fuel Tanks Made of Plastic Material - Testing Methods and Performance Requirements

Aerospace, Security and Defence Industries Association of Europe (ASD), Plastic Aging Test Chamber

ASD-STAN PREN 6063-1995 Aerospace Series Fibre Reinforced Plastics Test Method Determination of Material Degradation Due to Chemical Products (Edition P1)

工业和信息化部, Plastic Aging Test Chamber

QB/T 5247-2018 Test method for durability of plastic buckles for luggage accessories

国家林业和草原局, Plastic Aging Test Chamber

LY/T 3033-2018 Test methods for artificial aging of wood coatings for outdoor use

YU-JUS, Plastic Aging Test Chamber

JUS N.A5.200-1979 Ageing testing of electrical insulating materials. Statistical analysis ofageing test data. Methods based on mean values ofnormally distributed test results

Professional Standard - Agriculture, Plastic Aging Test Chamber

GB/T 1633-1979 Test method for softening point (Vicat) of thermoplastics

The American Road & Transportation Builders Association, Plastic Aging Test Chamber

AASHTO TP 86-2010 Standard Method of Test for Accelerated Aging of Bituminous Sealants and Fillers Using a Vacuum Oven

AWS - American Welding Society, Plastic Aging Test Chamber

G1.2M/G1.2-1999 Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics

Professional Standard - Aviation, Plastic Aging Test Chamber

HB 8402-2013 Test method for chemical resistance of plastics

AASHTO - American Association of State Highway and Transportation Officials, Plastic Aging Test Chamber

T 367-2017 Standard Method of Test for Accelerated Aging of Hot-Poured Asphalt Crack Sealant Using a Vacuum Oven

GM Global, Plastic Aging Test Chamber

GMW 14357-2012 Procedures of Test for Cellular and Related Materials Determination of Resistance to Humidity Aging Issue 2; English

Malaysia Standards, Plastic Aging Test Chamber

MS 1476-1999 Method of test for determining the carbon dioxide loss of plastics beverage containers

American National Standards Institute （ANSI), Plastic Aging Test Chamber

BS EN ISO 6603-2:2023 Plastics. Determination of puncture impact behaviour of rigid plastics Instrumented impact testing (British Standard)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Plastic Aging Test Chamber

PREN 2243-5-2001 Aerospace Series Non-Metallic Materials Structural Adhesives Test Method Part 5: Ageing Tests (Edition P 1)