ZH
RU
ES

Determination of the content of inorganic elements in solids

Determination of the content of inorganic elements in solids, Total:132 items.

In the international standard classification, Determination of the content of inorganic elements in solids involves: Fuels, Pulps, Analytical chemistry, Inorganic chemicals, Construction materials, Vocabularies, General methods of tests and analysis for food products, Fertilizers, Waxes, bituminous materials and other petroleum products, Information sciences. Publishing, Lubricants, industrial oils and related products, Non-metalliferous minerals, Energy and heat transfer engineering in general, Petroleum products in general, Physics. Chemistry, Water quality, Materials for the reinforcement of composites, Semiconducting materials, Products of the chemical industry, Plastics, Jewellery, Beverages, Glass, Non-ferrous metals, Metalliferous minerals, Organic chemicals, Laboratory medicine, Metrology and measurement in general, Cereals, pulses and derived products, Meat, meat products and other animal produce.

RU-GOST R, Determination of the content of inorganic elements in solids

GOST R 55130-2012 Solid recovered fuels. Determination of the content of major elements
GOST R 8.735.2-2013 State system for ensuring the uniformity of measurements. State hierarchy scheme for measuring instruments of the content of organic components in liquid and solid mediums and materials. Transfer of the units from the state primary standard based on liqui

Professional Standard - Commodity Inspection, Determination of the content of inorganic elements in solids

SN/T 3128-2012 Determination of oxygen element in organic chemicals.Elemental analyzer method
SN/T 3005-2011 Test method for instrumental determination of carbon,hydrogen,nitrogen and sulfur in organic chemicals
SN/T 3363-2012 Determination of impurity elements in pig lead.Inductively coupled plasma atomic emission spectrometry
SN/T 2047-2008 Determination of impurities in copper concentrates for import.Inductively coupled plasma atomic emission spectrometry

German Institute for Standardization, Determination of the content of inorganic elements in solids

DIN 22022-2:2001 Solid fuels - Determination of contents of trace elements - Part 2: ICP-OES
DIN 22022-7:2014 Solid fuels - Determination of contents of trace elements - Part 7: ICP-MS
DIN 22022-7:2014-07 Solid fuels - Determination of contents of trace elements - Part 7: ICP-MS
DIN 22022-2:2001-02 Solid fuels - Determination of contents of trace elements - Part 2: ICP-OES
DIN 22022-3:2001 Solid fuels - Determination of trace elements - Part 3: AAS-flame method
DIN EN 15410:2011-11 Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti); German version EN 15410:2011
DIN 22022-4:2001-02 Solid fuels - Determination of contents of trace elements - Part 4: Atomic absorption spectrometry applying the flameless hydride system or the cold-vapour-method
DIN EN 15517:2008 Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction; English version of DIN EN 15517:2008-09
DIN 22022-4:2001 Solid fuels - Determination of contents of trace elements - Part 4: Atomic absorption spectrometry applying the flameless hydride system or the cold-vapour-method
DIN 22022-5:2001 Solid fuels - Determination of trace elements - Part 5: Atomic absorption spectrometry applying the electrothermal atomization
DIN EN 15410:2011 Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti); German version EN 15410:2011
DIN 50451-1:2003 Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 1: Silver (Ag), gold (Au), calcium (Ca), copper (Cu), iron (Fe), potassium (K) and sodium (Na) in nitric acid by AAS
DIN 51933:2012 Testing of carbonaceous materials - Determination of content of dedusting substances in cokes by extraction - Solid materials
DIN 51933:1990 Testing of carbon materials; determination of content of dedusting substances in cokes by extraction; solid materials
DIN EN 15411:2011-11 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn); German version EN 15411:2011
DIN 50451-6:2014 Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 6: Determination of 36 elements in a high-purity ammonium fluoride solution (NH4F) and in etching mixtures of high-purity ammonium fluoride solution
DIN EN 15517:2008-09 Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction; German version EN 15517:2008
DIN 22022-1:2014-07 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN 50451-2:2003 Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 2: Calcium (Ca), cobalt (Co), chromium (Cr), copper (Cu), Iron (Fe), nickel (Ni) and zinc (Zn) in hydrofluoric acid with plasma-induced emission spectros
DIN 50451-3:2003 Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 3: Aluminium (Al), cobalt (Co), copper (Cu), sodium (Na), nickel (Ni) and zinc (Zn) in nitric acid by ICP-MS
DIN 22022-1:2014 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN 22022-1:2001 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation; Preparation of samples for the analyses (dissolution method)
DIN EN 1601:2017-10 Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID); German version EN 1601:2017
DIN EN 15411:2011 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn); German version EN 15411:2011
DIN 58984-1:1984 Special laboratory medicine; determination of inorganic substances in serum, plasma, urine and other body fluids; determination of calcium by atomic absorption spectrometry
DIN 51852-3:2023-05 Coolants for internal combustion engines - Test methods - Part 3: Direct determination of element contents from additives and impurities by optical emission spectral analysis with inductively coupled plasma (ICP OES) / Note: Date of issue 2023-03-31
DIN 51399-1:2017-02 Testing of lubricants - Determination of elements content in additives, wear and other contaminations - Part 1: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)
DIN 51627-6:2011 Automotive Fuels - Test methods - Part 6: Direct determination of trace elements in vegetable oils by inductively coupled plasma optical emission spectroscopy (ICP OES)
DIN 51399-1:2017 Testing of lubricants - Determination of elements content in additives, wear and other contaminations - Part 1: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)
DIN 51399-1:2009 Testing of lubricants - Determination of elements content in additives, wear and other contaminations - Part 1: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)

Association Francaise de Normalisation, Determination of the content of inorganic elements in solids

XP CEN/TS 17786-2:2022 Engrais inorganiques à base d'oligo-éléments - Détermination de la teneur en oligo-éléments chélatés et de la fraction chélatée des oligo-éléments - Partie 2 : dosage de l'EDTA, du DTPA, du HEEDTA, de l'IDHA ou de l'EDDS
XP CEN/TS 17786-1:2022 Engrais inorganiques à base d'oligo-éléments - Détermination de la teneur en oligo-éléments chélatés et de la fraction chélatée des oligo-éléments - Partie 1 : traitement avec une résine échangeuse de cations
NF M03-052:2003 Solid mineral fuels - Determination of trace elements contained in coals - AAS or plasma emission method.
NF X34-224*NF EN 15410:2011 Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti).
XP CEN/TS 17764:2022 Engrais inorganiques - Détermination de la concentration en oligo-éléments libres, chélatés ou complexés et des agents chélatants et/ou complexants présents dans les engrais inorganiques composés à base d'oligo-éléments
NF V03-064*NF EN 15763:2010 Foodstuffs - Determination of trace elements - Determination of arsenic, cadmium, mercury and lead in foodstuffs by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion.
NF EN 15410:2011 Combustibles solides de récupération - Méthodes de détermination de la teneur en éléments majeurs (Al, Ca, Fe, K, Mg, Na, P, Si et Ti)
NF X34-225*NF EN 15411:2011 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn).
NF V37-064*NF EN 15517:2008 Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction.
NF EN 15411:2011 Combustibles solides de récupération - Méthodes de détermination de la teneur en éléments à l'état de traces (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V et Zn)
NF EN 16802:2016 Produits alimentaires - Détermination des éléments et de leurs espèces chimiques - Détermination de la teneur en arsenic inorganique dans les produits alimentaires d'origines marine et végétale, par CLHP avec échange d'anions et spectrométri...
NF EN 17053:2018 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Dosage par ICP-MS (multiméthode) des éléments traces, métaux lourds et autres éléments inorganiques présents dans les aliments
NF EN 1601:2017 Produits pétroliers liquides - Détermination des composés oxygénés organiques et de la teneur totale en oxygène organiquement lié dans l'essence sans plomb - Méthode par chromatographie en phase gazeuse (O-FID)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Determination of the content of inorganic elements in solids

GB/T 43012-2023 Determination of sulfur element and sulfate half-ester content in pulp cellulose nanocrystals
GB/T 30905-2014 Inorganic chemicals for industrial use.Determination of element contents.X-ray fluorescence analysis

Group Standards of the People's Republic of China, Determination of the content of inorganic elements in solids

T/SPSTS 013-2019 Determination of the carbon, hydrogen, oxygen, nitrogen, and sulfur content of graphene powder materials— Elemental analyzer method
T/CSTM 00340-2020 Determination of the carbon, hydrogen, oxygen, nitrogen, and sulfur content of graphene powder materials— Elemental analyzer method
T/WSJD 004-2020 Determination of multi-element contents in hair— Inductively coupled plasma atomic emission spectrometry
T/CGIA 012-2019 Determination of metallic elements in graphene materials — Inductively coupled plasma emission spectrometry
T/CNIA 0120-2021 Determination of trace impurity elements in high-purity nitric acid for the electronics industry by inductively coupled plasma mass spectrometry
T/CNIA 0118-2021 Determination of trace impurity elements in high-purity hydrofluoric acid for the electronics industry by inductively coupled plasma mass spectrometry
T/CPCIF 0232-2022 Determination of titanium，magnesium， aluminum，calcium，iron，zinc and sodium in polybutylene— Inductively coupled plasma optical emission spectrometry（ICP-OES）

International Organization for Standardization (ISO), Determination of the content of inorganic elements in solids

ISO 10084:1992 Solid fertilizers; determination of mineral-acid-soluble sulfate content; gravimetric method
ISO/DIS 9795:1980 Lignins — Determination of inorganics content in kraft lignin, soda lignin and hydrolysis lignin
ISO/FDIS 9795:2023 Lignins — Determination of inorganics content in kraft lignin, soda lignin and hydrolysis lignin
ISO/CD 3884:2023 Solid recovered fuels — Methods for the determination of the content of elements (Al, Ca, Fe, K, Mg, Na, P, S, Si, Ti, As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Sn, Tl, V, Zn)

国家市场监督管理总局、中国国家标准化管理委员会, Determination of the content of inorganic elements in solids

GB/T 39527-2020 Determination of calcium, aluminium and silicon in the solid surface materials—Method of chemical analysis
GB/T 38789-2020 Oral care and cleansing products—Determination of 10 elements in toothpaste—Inductively coupled？plasma mass spectrometry
GB/T 38744-2020 Methods for chemical analysis of synergistic catalysis elements in automotive exhaust catalysis－Determination of cerium, lanthanum, praseodymium, neodymium ,barium and zirconium contents－Inductively coupled plasma atomic emission spectrometry

British Standards Institution (BSI), Determination of the content of inorganic elements in solids

DD CEN/TS 15410:2006 Solid recovered fuels — Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
PD CEN/TS 17786-2:2022 Inorganic micronutrient fertilizers. Determination of the chelated micronutrient content and the chelated fraction of micronutrients. Determination of EDTA, DTPA, HEEDTA, IDHA or EDDS
BS DD CEN/TS 15410:2006 Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
BS EN 15410:2011 Solid recovered fuels. Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
BS 5551-4.5:1993 Fertilizers. Chemical analysis. Method for determination of mineral-acid-soluble sulfate content of solid fertilizers
BS DD CEN/TS 15111:2005 Foodstuffs - Determination of trace elements - Determination of iodine in dietetic foods by ICP-MS (inductively coupled plasma mass spectrometry)
23/30446974 DC BS ISO 9795. Lignins. Determination of inorganics content in kraft lignin, soda lignin and hydrolysis lignin
PD CEN/TS 17786-1:2022 Inorganic micronutrient fertilizers. Determination of the chelated micronutrient content and the chelated fraction of micronutrients. Treatment with a cation exchange resin
PD CEN/TS 17764:2022 Inorganic micronutrient fertilizers. Determination of the concentration of free, chelated or complexed micronutrients and the chelating and/or complexing agents present in compound inorganic micronutrient fertilizers
BS EN 15517:2008 Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction
DD CEN/TS 15411:2006 Solid recovered fuels — Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
BS EN 15411:2011 Solid recovered fuels. Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
BS ISO 11495:2008 Jewellery - Determination of palladium in palladium jewellery alloys - Inductively coupled plasma (ICP) solution-spectrometric method using yttrium as internal standard element
BS EN 16136:2012 Automotive fuels. Determination of manganese content in unleaded petrol. Inductively coupled plasma optical emission spectrometry (ICP OES) method
BS EN 1601:2017 Liquid petroleum products. Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol. Method by gas chromatography (O-FID)
BS 5551 Sec.4.5:1993 Fertilizers. Chemical analysis. Method for determination of mineral-acid-soluble sulfate content of solid fertilizers
BS EN 16802:2016 Foodstuffs. Determination of elements and their chemical species. Determination of inorganic arsenic in foodstuffs of marine and plant origin by anion-exchange HPLC-ICP-MS

PT-IPQ, Determination of the content of inorganic elements in solids

NP 1376-1976

Professional Standard - Environmental Protection, Determination of the content of inorganic elements in solids

HJ 1211-2021 Determination of Inorganic Elements in Solid Waste by Wavelength Dispersive X-ray Fluorescence Spectrometry
HJ 829-2017 Ambient air -Determination of inorganic elements in ambient particle matter- Energy dispersive X-ray fluorescence spectroscopy (ED-XRF) method

European Committee for Standardization (CEN), Determination of the content of inorganic elements in solids

CEN EN 15517-2008_ Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction
EN 15517:2008 Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction
EN 15411:2011 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)

Professional Standard - Building Materials, Determination of the content of inorganic elements in solids

JC/T 2132-2012 Determination of doped and trace elements in barium strontium titanate (BST).Inductively coupled plasma atomic emission spectrometric method
JC/T 2133-2012 Determination of impurities in silica sol for polishing solution in semiconductor industry.Inductively coupled plasma atomic emission spectrometric method

工业和信息化部, Determination of the content of inorganic elements in solids

SJ/T 11555-2015 Determination of metal element content in nitric acid using inductively coupled plasma mass spectrometry
SJ/T 11554-2015 Determination of metal element content in hydrofluoric acid using inductively coupled plasma optical emission spectrometry
SH/T 1829-2020 Determination of trace element content in plastic polyethylene and polypropylene resins by inductively coupled plasma optical emission spectrometry

CEN - European Committee for Standardization, Determination of the content of inorganic elements in solids

PD CEN/TS 15410:2006 Solid recovered fuels - Method for the determination of the content of major elements (Al@ Ca@ Fe@ K@ Mg@ Na@ P@ Si@ Ti)
PD CEN/TS 15411:2006 Solid recovered fuels - Methods for the determination of the content of trace elements (As@ Ba@ Be@ Cd@ Co@ Cr@ Cu@ Hg@ Mo@ Mn@ Ni@ Pb@ Sb@ Se@ Tl@ V and Zn)

Danish Standards Foundation, Determination of the content of inorganic elements in solids

DS/EN 15410:2011 Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
DS/EN 15411:2011 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
DS/EN 15517:2008 Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction

Lithuanian Standards Office , Determination of the content of inorganic elements in solids

LST EN 15410-2011 Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
LST EN 15411-2011 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
LST EN 15517-2008 Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction
LST EN 16136-2015 Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method

AENOR, Determination of the content of inorganic elements in solids

UNE-EN 15410:2012 Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
UNE-EN 15411:2012 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
UNE-EN 15517:2008 Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction

Professional Standard - Energy, Determination of the content of inorganic elements in solids

NB/SH/T 0929-2016 Determination of Chlorine Content in Lubricating Oil by Inductively Coupled Plasma Emission Spectrometry
NB/SH/T 0923-2016 Determination of element content in insulating oil by inductively coupled plasma atomic emission spectrometry
NB/T 11245-2023 Determination of Trace Elements in Solid Biomass Fuels by Inductively Coupled Plasma-Atomic Emission Spectrometry
NB/SH/T 6037-2021 Procedure for Determination of Contents of Six Main Rare Earth Elements in Fluid Catalytic Cracking Catalysts, Zeolites, Additives and Related Substances by Inductively Coupled Plasma Emission Spectrometry

国家能源局, Determination of the content of inorganic elements in solids

SH/T 0929-2016 Determination of chlorine content in lubricating oils by inductively coupled plasma optical emission spectrometry
SH/T 0923-2016 Determination of elemental content in insulating oil by inductively coupled plasma atomic emission spectrometry

Yunnan Provincial Standard of the People's Republic of China, Determination of the content of inorganic elements in solids

DB53/T 667-2015 Determination of multielement content in hair by inductively coupled plasma atomic emission spectrometry

Gansu Provincial Standard of the People's Republic of China, Determination of the content of inorganic elements in solids

DB62/T 2760-2017 Determination of multi-element content in cryolite by inductively coupled plasma atomic emission spectrometry
DB62/T 2763-2017 Determination of multielement content in aluminum fluoride by inductively coupled plasma atomic emission spectrometry

Professional Standard - Agriculture, Determination of the content of inorganic elements in solids

SN/T 5581-2023 Determination of monomer content in recycled acrylonitrile-butadiene-styrene copolymers by elemental analysis
NY/T 4313-2023 Determination of Arsenic, Cadmium, Lead, Chromium, Copper and Zinc in Biogas Slurry Microwave Digestion-Inductively Coupled Plasma Mass Spectrometry

Professional Standard - Petrochemical Industry, Determination of the content of inorganic elements in solids

NB/SH/T 0828-2010 Standard test method for determination of silicon and other elements in engine coolant by inductively coupled plasma-atomic emission spectroscopy
NB/SH/T 0824-2010 Standard test method for determination of additive elements in lubricating oils by inductively coupled plasma atomic emission spectrometry
SH/T 0749-2004 Standard test method for determination of additive elements in both lubricating oils and additives by inductively coupled plasma atomic emission spectrometry

American Society for Testing and Materials (ASTM), Determination of the content of inorganic elements in solids

ASTM D5673-15 Standard Test Method for Elements in Water by Inductively Coupled Plasma&x2014;Mass Spectrometry
ASTM D5673-16 Standard Test Method for Elements in Water by Inductively Coupled Plasma&x2014;Mass Spectrometry
ASTM E2330-12 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
ASTM D6349-07 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma-Atomic Emission Spectrometry
ASTM D6349-08e1 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasmax2014;Atomic Emission Spectrometry
ASTM D6349-09 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma&x2014;Atomic Emission Spectrometry
ASTM D6349-13 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasmamdash;Atomic Emission Spectrometry

廊坊市市场监督管理局, Determination of the content of inorganic elements in solids

DB1310/T 229-2020 Determination of metal element content in high-purity carbon materials by inductively coupled plasma optical emission spectrometry

CZ-CSN, Determination of the content of inorganic elements in solids

CSN 68 4152-1987 Extra pure compounds etermination of a content of chemical lements admixture in liquid compounds y a method of atomic emission spectros- opy

Professional Standard - Light Industry, Determination of the content of inorganic elements in solids

QB/T 4711-2014 Determination of inorganic elements in Chinese rice wine.Inductive coupled plasma mass spectrometry and inductive coupled plasma atomic emission spectrometry
QB/T 4851-2015 Determination of inorganic elements in wine.Inductive coupled plasma mass spectrometry and inductive coupled plasma atomic emission spectrometry

ES-UNE, Determination of the content of inorganic elements in solids

UNE-EN 1601:2018 Liquid petroleum products - Determination of organic oxygenate compounds and total organically bound oxygen content in unleaded petrol - Method by gas chromatography (O-FID)

Guangxi Provincial Standard of the People's Republic of China, Determination of the content of inorganic elements in solids

DB45/T 1106-2014 Determination of the content of silicon, aluminum, sulfur, phosphorus, arsenic, copper, zinc, lead and titanium in red mud magnetic separation iron concentrate by inductively coupled plasma emission spectrometry