ZH
RU
ES
Kettle type high temperature furnace
Kettle type high temperature furnace, Total:158 items.
In the international standard classification, Kettle type high temperature furnace involves: Equipment for the metallurgical industry, Industrial furnaces, Welding, brazing and soldering, Construction materials, Conducting materials, Burners. Boilers, Refractories, Paints and varnishes, Fuels, Mechanical testing, Audio, video and audiovisual engineering, Equipment for the chemical industry, Fluid storage devices, Environmental protection, Dentistry, Ferrous metals, Thermodynamics and temperature measurements, Metalliferous minerals, Iron and steel products, Extraction and processing of petroleum and natural gas, Raw materials for rubber and plastics, Rubber, Energy and heat transfer engineering in general, Electricity. Magnetism. Electrical and magnetic measurements, Heat treatment, Rotating machinery, On-board equipment and instruments, Installations in buildings, Electrical equipment for working in special conditions, Power stations in general, Pipeline components and pipelines, Aerospace fluid systems and components, Rectifiers. Convertors. Stabilized power supply, Agricultural machines, implements and equipment, Products of the chemical industry, Fruits. Vegetables, Vocabularies, Medical equipment, Testing of metals, Fasteners.
工业和信息化部, Kettle type high temperature furnace
- YS/T 1126-2016 Resistance ultra-high temperature vacuum furnace
- YB/T 4632-2017 Compound blast furnace tuyere
- JC/T 2632-2021 Technical conditions of high temperature carbonization furnace for carbon fiber production
- YD/T 2657-2021 High-temperature valve-regulated lead-acid battery for communications
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Kettle type high temperature furnace
- GB/T 30163-2013 Specifications of top combustion stove with high blast temperature for blast furnace
- GB/T 15415-1994 Methods of measurement for furnace high-temperature television system
- GB/T 15414-1994 Generic specification for furnace high-temperature television system
- GB/T 24204-2009 Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by dynamic method
- GB 50505-2009 Code for design of BFG dry bag filter
- GB/T 32527-2016 Design specification of space materials science experimental facility.Multifunctional high temperature furnace
- GB/T 31923.2-2015 Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by static method.Part 2:Reduction with CO and N<下标2>
- GB/T 31923.1-2015 Iron ores for blast furnace feedstocks.Determination of low-temperature reduction-disintegration indices by static method.Part 1: Reduction with CO, CO<下标2>, H<下标2> and N<下标2>
IT-UNI, Kettle type high temperature furnace
Professional Standard - Electron, Kettle type high temperature furnace
- SJ 20974-2007 Generic specification for high temperature sintering elevator furnace
- SJ/T 31130-1994 Requirements of readiness and methods of inspection and assessment for D051-22 high temperature hydrogen furnaces
- SJ/T 11274-2002 Generic specification for pusher type high temperature electro-heat tunnel kiln
Professional Standard - Machinery, Kettle type high temperature furnace
- JB/T 12528-2015 Large pit-type controlled atmosphere high temperature carburizing furnace unit
- JB/T 11583-2013 High temperature furnace used for testing machines.Technical specification
- JB/T 14495-2023 Dry bag filter for blast furnace gas
- JB/T 2167-1999 Disappearing-filament optical pyrometer
- JB/T 6865-1993 Pendulum type high and low temperature impact testing machine technical conditions
Association of German Mechanical Engineers, Kettle type high temperature furnace
Group Standards of the People's Republic of China, Kettle type high temperature furnace
- T/CSTM 00202-2020 high temperature kiln fired slag bricks
- T/CSTM 00640-2022 High temperature resistant powder coatings for oven
- T/SSEA 0096-2020 Technical Requirements for Covering and Insulation of Blast Furnace Ladle
- T/CAMIE 08-2021 High temperature, high humidity and high corrosion resistant bag filter
- T/ZZB 1777-2020 High voltage full immersed electrode hot water boiler
- T/TLRIA 0002-2017 With stant high temperature and high pressure compression rubber element for packer
- T/TLRIA 0001-2017 With stant high temperature and high pressure Inflatable rubber element for packer
- T/SHDSGY 123-2023 Technical specification for nitrogen oxide detection instruments in high-temperature boiler flue gas
- T/CEC 685-2022 Technical specification for high-temperature nano-ceramic recognition coating on boiler heating surface
- T/JSREA 03-2023 Static meter for direct current energy for high temperature high humidity and high salt fog areas
- T/CEEIA 284-2017 Specification for vertical high-temperature and high-pressure shielded electric pump（lower pump）
- T/CSEE 0182-2021 The technical guide for the atmosphere measurement at high temperature corrosion area close to furnace water wall of a coal-fired boiler
- T/CAMS 58-2021 Energy efficiency test method for laboratory equipment—Box resistance furnace
- T/CFA 0203081-2020 General technical requirements for high-efficient and energy-saving aluminum alloy gas continuous melting and holding furnace
Professional Standard - Ferrous Metallurgy, Kettle type high temperature furnace
- YB/T 4038-2007 Low temperature carbon tamping paste for blast furnace
- YB/T 4038-1991 Low temperature rough seam paste for blast furnace
- YB/T 4443-2014 Refractory mortars for carbon roaster
- YB/T 4157-2007 High temperature lever shut-off butterfly valve
- YB/T 4559-2016 Technical specification for top-pressure recovery turbine of blast furnace gas(Dry)
- YB/T 4234.1-2010 Gas bleed valve for BF.Part 1 Hydraulic drive with spring pressing type top gas bleed valve
AENOR, Kettle type high temperature furnace
- UNE 9003:1986 HIGH-TEMPERATURE WATER BOILERS. CLASSIFICATION.
- UNE-EN 14394:2006+A1:2009 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
- UNE-EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple (ISO 13078:2013)
冶金工业部, Kettle type high temperature furnace
- YB 4038-1991 Low temperature rough seam paste for blast furnace
Anhui Provincial Standard of the People's Republic of China, Kettle type high temperature furnace
- DB34/T 3449-2019 Diagnosis guidelines for typical damage modes of high temperature headers of utility boilers
International Organization for Standardization (ISO), Kettle type high temperature furnace
- ISO 540:1995 Solid mineral fuels - Determination of fusibility of ash - High-temperature tube method
- ISO/PRF 13078-3 Dentistry — Dental furnace — Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple
- ISO 6528-3:1988 Rubber; determination of total sulfur content; part 3: furnace combustion method
- ISO 13078-3:2023 Dentistry — Dental furnace — Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple
- ISO/R 203:1961 Interrupted creep testing of steel at elevated temperatures (load and temperature interrupted)
ZA-SANS, Kettle type high temperature furnace
- SANS 43:1995 Solid mineral fuels - Determination of fusibility of ash - High-temperature tube method
Professional Standard - Chemical Industry, Kettle type high temperature furnace
- HG/T 3673-2000 Static cast fittings of fubnace for service pressure bearing at high temperature
- HG/T 4565-2013 High-temperature resistant coatings for boilers and auxiliary equipments
- HG/T 2601-2000 Centifugal casting alloy tubes for service of pressure bearing at high temperature
- HG/T 2601-2011 Centrifugal casting alloy tubes for service of pressure bearing at high temperature
Society of Automotive Engineers (SAE), Kettle type high temperature furnace
- SAE AMS6562-2023 Medium Temperature, Out-of-Autoclave, Oven-Vacuum-Bag Cure Epoxy Resin Impregnated Fiber Reinforced Composite Materials
- SAE AMS6562/1-2023 Medium Temperature, Out-of-Autoclave, Oven-Vacuum-Bag Cure Epoxy Resin Impregnated Fiber Reinforced Composite Materials, Type 35, Class 4, Grade 293, Style 7781
- SAE MA2154/3-1991 Clamp, Rectangular, 2 Piece, Cushioned, with Wedges, High Temperature, Metric
SE-SIS, Kettle type high temperature furnace
- SIS SS 18 71 77-1991 Solid fuels — Determination of total sulfur using a high temperature tube furnace combustion method
European Committee for Standardization (CEN), Kettle type high temperature furnace
- prEN 127-1-1980 CEN-heating boiler standard for boilers with operating temperature up to 100 C
- prEN ISO 13078-3 Dentistry - Dental furnace - Part 3: Test method for evaluation of high temperature sintering furnace measurement with separate thermocouple (ISO/DIS 13078-3:2022)
- prEN 127-2-1980 CEN-heating boiler standard for boilers made from steel with operating temperatures exceeding 100 C and for steam
- prEN 127-3-1980 CEN-heating boiler standard for boilers made from cast-iron with operating temperatures exceeding 100 C and for steam
BE-NBN, Kettle type high temperature furnace
American Society of Mechanical Engineers (ASME), Kettle type high temperature furnace
RU-GOST R, Kettle type high temperature furnace
- GOST 20901-1975 Refractory and high-refractory products for laying of stoves and hot blast mains of blast furnaces. Specifications
- GOST 27462-1987 Resistance electric furnace for melting aluminium and holding it in hot state. Specific consumtion of electric energy
- GOST 10888-1993 Periclasechromite refractories products for the steelmelting furnace roofs. Specifications
- GOST 10888-1976 Periclasechromite refractories for the steelmelting furnace roofs
- GOST 8335-1996 Visual disappearing filament pyrometers. General specifications
- GOST 13881-1968 Thermoelectric pyrometers. Methods and means of verification
- GOST 8335-1981 Visual disappearing filament micro-pyrometers. General specifications
- GOST 21436-2004 Refractory and high-refractoty articles for the lining of rotary furnaces. Specifications
- GOST 21436-1975 Refractory and highly-refractory articles for the lining of rotary furnaces. Specifications
Professional Standard - Petrochemical Industry, Kettle type high temperature furnace
- SH/T 3417-2007 Technical specification of weld engineering for high alloy steel tube of petrochemical tubular heater
- SH/T 3417-2018 Technical conditions for welding engineering of high-alloy furnace tubes in petrochemical tube furnaces
- SH/T 3423-2011 High alloy cast tube and fitting of tubular heater in petrochemical engineering
Henan Provincial Standard of the People's Republic of China, Kettle type high temperature furnace
- DB41/T 1294-2016 Test and Evaluation of High Temperature Sulfur Corrosion of Water Wall of Power Plant Boiler
Association Francaise de Normalisation, Kettle type high temperature furnace
- NF C13-211:1985 High voltage electrical installations - Installation of jet boilers or boilers - With immersed electrodes.
- NF EN 14394+A1:2008 Chaudières de chauffage - Chaudières avec brûleurs à air soufflé - Puissance utile inférieure ou égale à 10 MW et température maximale de service de 110 oC
- NF EN 14394/IN1:2008 Chaudières de chauffage - Chaudières avec brûleurs à air soufflé - Puissance utile inférieure ou égale à 10 MW et température maximale de service de 110 oC
American Society for Testing and Materials (ASTM), Kettle type high temperature furnace
- ASTM D4239-94 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM D4239-10 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
- ASTM D4239-97e1 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM D4239-04a Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM D4239-04 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM d4239-18 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM D4239-17 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM D4239-08 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
- ASTM D423-66(1972) Standard Test Method for Determination of Sulfur in Coal and Coke Analytical Samples by High Temperature Tube Furnace Combustion Method
- ASTM D4239-00 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM D4239-02 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM D4239-11 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
- ASTM D4239-13 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM D4239-05 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
- ASTM D4239-12 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM D4239-14e1 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM D4239-18e1 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM D4239-10e1 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
- ASTM D4239-13e1 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM D4239-14 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM D4239-14e2 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- ASTM D5016-16 Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
- ASTM D5016-08e1 Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
- ASTM D5016-07 Standard Test Method for Sulfur in Ash from Coal, Coke, and Residues from Coal Combustion Using High-Temperature Tube Furnace Combustion Method with Infrared Absorption
- ASTM D5016-07a Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption
British Standards Institution (BSI), Kettle type high temperature furnace
- BS EN ISO 13078-3:2023 Dentistry. Dental furnace - Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple
- 22/30425562 DC BS EN ISO 13078-3. Dentistry. Dental furnace. Part 3. Test method for evaluation of high temperature sintering furnace measurement with separate thermocouple
- BS 691:1987 Specification for sub-normal range ovulation and dual-scale clinical maximum thermometers (mercury-in-glass, solid stem)
- BS 845-2:1987 Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids - Comprehensive procedure
Korean Agency for Technology and Standards (KATS), Kettle type high temperature furnace
- KS M ISO 6528-3:2006 Rubber-Determination of total sulfur content-Part 3:Furnace combustion method
- KS M ISO 6528-3:2016 Rubber－Determination of total sulfur content－Part 3：Furnace combustion method
- KS B 6203-2002 Maximum working pressure and super heated steam temperature of stationary steam boilers
- KS E ISO 13930-2017(2022) Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by dynamic method
- KS B 6203-2002(2022) Maximum working pressure and super heated steam temperature of stationary steam boilers
United States Navy, Kettle type high temperature furnace
PL-PKN, Kettle type high temperature furnace
- PN E06211-1973 Industrial Iow temperature batch-type electric res?stance furnaces Generals reguirements and tests
BR-ABNT, Kettle type high temperature furnace
HU-MSZT, Kettle type high temperature furnace
AT-ON, Kettle type high temperature furnace
- ONORM M 7550-2002 Heating boilers with operation temperatures up to 100℃-Concepts,requirements, testing,marking
未注明发布机构, Kettle type high temperature furnace
- BS ISO 13930:2015(2018) Iron ores for blast furnace feedstocks — Determination of low - temperature reduction - disintegration indices by dynamic method
KR-KS, Kettle type high temperature furnace
- KS E ISO 13930-2017 Iron ores for blast furnace feedstocks－Determination of low-temperature reduction-disintegration indices by dynamic method
CZ-CSN, Kettle type high temperature furnace
IN-BIS, Kettle type high temperature furnace
Professional Standard - Petroleum, Kettle type high temperature furnace
- SY/T 0324-2001 Specification of construction and acceptance of heat insulation for buried high temperatrue steel pipeline
Danish Standards Foundation, Kettle type high temperature furnace
- DS/EN ISO 13078:2013 Dentistry - Dental furnace - Test method for temperature measurement with separate thermocouple
- DS/EN 14394+A1:2008 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
German Institute for Standardization, Kettle type high temperature furnace
- DIN 8979:1973 High temperature test for refrigeration motor compressors
- DIN EN ISO 13078-3:2023-08 Dentistry - Dental furnace - Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple (ISO 13078-3:2023); German version EN ISO 13078-3:2023
- DIN EN 14394:2008-12 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C; German version EN 14394:2005+A1:2008
Sichuan Provincial Standard of the People's Republic of China, Kettle type high temperature furnace
- DB51/T 1631-2013 General technical requirements for direct-fired household biomass stoves in alpine mountainous areas
Liaoning Provincial Standard of the People's Republic of China, Kettle type high temperature furnace
- DB21/T 2662.11-2016 Boiler Operation Specifications Part 11: Determination of Scale Inhibition Rate of Industrial Steam Boiler Scale Inhibition Rate Heating Surface Wall Temperature Raise Method
National Metrological Verification Regulations of the People's Republic of China, Kettle type high temperature furnace
- JJG 68-1991 Verification Regulation of for Working Disappearing-Filament of Optical Pyrometer
Guangxi Provincial Standard of the People's Republic of China, Kettle type high temperature furnace
- DB45/T 1424-2016 Specifications for the design of high-temperature reaction furnaces for the production of graphene three-dimensional structure powder materials
ES-UNE, Kettle type high temperature furnace
- UNE-EN ISO 13078-3:2023 Dentistry - Dental furnace - Part 3: Test method for the evaluation of high temperature sintering furnace measurement with a separate thermocouple (ISO 13078-3:2023) (Endorsed by Asociación Española de Normalización in July of 2023.)
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Kettle type high temperature furnace
- ASHRAE 4371-2000 Adaptive Fuzzy Algorithm for Domestic Hot Water Temperature Control of a Combi-Boiler (The Full Text of This Paper Can Be Found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research@ Volume 6@ Number 2@ April 20
Guangdong Provincial Standard of the People's Republic of China, Kettle type high temperature furnace
- DB44/T 849.3-2010 Determination of scale inhibition rate of industrial boiler scale inhibitors Part 3: Heated surface wall temperature rise method
Lithuanian Standards Office , Kettle type high temperature furnace
- LST EN 14394-2006+A1-2008 Heating boilers - Heating boilers with forced draught burners - Nominal heat output not exceeding 10 MW and maximum operating temperature of 110 °C
Professional Standard - Post and Telecommunication, Kettle type high temperature furnace
- YD/T 2657-2013 High temperature valve-regulated lead acid batteries for telecommunications
Japanese Industrial Standards Committee (JISC), Kettle type high temperature furnace
- JIS Z 2280:1993 Test method for Young's modulus of metallic materials at elevated temperature
Aerospace Industries Association/ANSI Aerospace Standards, Kettle type high temperature furnace
- AIA/NAS NAS 560-1980 Screw-Machine, Non Magnetic High Temperature, Structural, 100 Degree Flush Head (Rev. 5)