ZH
RU
ES

Xenon thermal conductivity

Xenon thermal conductivity, Total:322 items.

In the international standard classification, Xenon thermal conductivity involves: Ceramics, Plastics, Rubber, Rubber and plastics products, Refractories, Leather technology, Vacuum technology, Heat recovery. Thermal insulation, Products of the chemical industry, Measurement of force, weight and pressure, Thermodynamics and temperature measurements, Protection of and in buildings, Wood, sawlogs and sawn timber, Non-ferrous metals, Construction materials, Seals, glands, Elements of buildings, Protective equipment, Metrology and measurement in general, Road vehicle systems, External structures, Surface treatment and coating, Semiconducting materials, Electrical wires and cables, Soil quality. Pedology, Analytical chemistry, Semiconductor devices, Pulps, Paper and board, Power stations in general, Measurement of fluid flow, Test conditions and procedures in general, Electricity. Magnetism. Electrical and magnetic measurements, Ferroalloys, Ferrous metals, Heat pumps, Energy and heat transfer engineering in general, Protection against fire, Medical equipment.

Professional Standard - Aerospace, Xenon thermal conductivity

QJ 20027-2011 Test method for thermal conductivity of thermal conductive grease at low temperature
QJ 1402-1988 Test method for low temperature thermal conductivity of metals
QJ 1181.6A-1995 Heat Treatment of Soft Magnetic Alloys Heat Treatment of Constant Magnetic Permeability Alloys
QJ 809-1983 Method for determination of thermal conductivity of solid propellants and solid motor insulation
QJ 809-1994 Quasi-steady-state method for the determination of thermal conductivity and specific heat capacity of composite solid propellants

国家市场监督管理总局、中国国家标准化管理委员会, Xenon thermal conductivity

GB/T 39862-2021 Test method for thermal conductivity of high thermal conductivity ceramics

American Welding Society (AWS), Xenon thermal conductivity

WRC 357:1990 Calculation of Electrical and Thermal Conductivities of Metallurgical Plasmas

British Standards Institution (BSI), Xenon thermal conductivity

BS ISO 22007-6:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Comparative method for low thermal conductivities using a temperature-modulation technique
BS EN ISO 22007-6:2015 Plastics. Determination of thermal conductivity and thermal diffusivity. Comparative method for low thermal conductivities using a temperature-modulation technique
BS ISO 22007-7:2023 Plastics. Determination of thermal conductivity and thermal diffusivity - Transient measurement of thermal effusivity using a plane heat source
BS EN ISO 22007-1:2017 Tracked Changes. Plastics. Determination of thermal conductivity and thermal diffusivity. General principles
BS EN ISO 22007-4:2017 Tracked Changes. Plastics. Determination of thermal conductivity and thermal diffusivity. Laser flash method
21/30427387 DC BS EN ISO 22007-2. Plastics. Determination of thermal conductivity and thermal diffusivity. Part 2. Transient plane heat source (hot disc) method
BS EN ISO 12631:2017 Tracked Changes. Thermal performance of curtain walling. Calculation of thermal transmittance
BS EN ISO 22007-2:2022 Plastics. Determination of thermal conductivity and thermal diffusivity - Transient plane heat source (hot disc) method
23/30465226 DC BS EN ISO 22007-1. Plastics. Determination of thermal conductivity and thermal diffusivity - Part 1. General principles
BS EN ISO 10077-1:2017 Thermal performance of windows, doors and shutters. Calculation of thermal transmittance - General
23/30466777 DC BS EN ISO 22007-4. Plastics. Determination of thermal conductivity and thermal diffusivity - Part 4. Laser flash method
BS EN ISO 11357-8:2021 Plastics. Differential scanning calorimetry (DSC). Determination of thermal conductivity
BS EN ISO 12567-2:2005 Thermal performance of windows and doors. Determination of thermal transmittance by hot box method - Roof windows and other projecting windows
BS ISO 9869-2:2018+A1:2021 Thermal insulation. Building elements. In-situ measurement of thermal resistance and thermal transmittance - Infrared method for frame structure dwelling
22/30427246 DC BS ISO 22007-7. Plastics. Determination of thermal conductivity and thermal diffusivity. Part 7. Measurement of thermal effusivity using a regularly-shaped transient plane source probe
BS PD CEN ISO/TR 22007-5:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Results of interlaboratory testing of poly(methyl methacrylate) samples
BS EN ISO 22007-2:2015 Plastics. Determination of thermal conductivity and thermal diffusivity. Transient plane heat source (hot disc) method
PD CEN ISO/TR 22007-5:2014 Plastics. Determination of thermal conductivity and thermal diffusivity. Results of interlaboratory testing of poly(methyl methacrylate) samples
BS ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity
BS EN 993-15:2005 Methods of test for dense shaped refractory products - Part 15: Determination of thermal conductivity by the hot wire (parallel) method
BS EN ISO 6946:2017 Tracked Changes. Building components and building elements. Thermal resistance and thermal transmittance. Calculation methods
DD CEN/TS 1159-4:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity
BS EN ISO 14683:2017 Tracked Changes. Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values
22/30461582 DC BS EN 673. Glass in building. Determination of thermal transmittance (U value). Calculation method
22/30441984 DC BS ISO 9869-3. Thermal insulation of building elements. In-situ measurement of thermal resistance and thermal transmittance - Part 3. Probe insertion method
BS ISO 1853:2018 Tracked Changes. Conducting and dissipative rubbers, vulcanized or thermoplastic. Measurement of resistivity
PD ISO/TS 5660-3:2012 Reaction-to-fire tests. Heat release, smoke production and mass loss rate. Guidance on measurement
BS EN ISO 15351:2010 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method)
BS 1902-5.8:1992 Methods of testing refractory materials - Refractory and thermal properties - Determination of thermal conductivity (split column method) (method 1902-508)
23/30445047 DC BS EN ISO 10077-2 AMD 1. Thermal performance of windows, doors and shutters. Calculation of thermal transmittance - Part 2. Numerical method for frames
BS IEC 62830-5:2021 Semiconductor devices. Semiconductor devices for energy harvesting and generation. Test method for measuring generated power from flexible thermoelectric devices
BS 1902 Sec.5.8:1992 Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal conductivity (split column method) (method 1902-508)

WRC - Welding Research Council, Xenon thermal conductivity

BULLETIN 357-1990 CALCULATION OF ELECTRICAL AND THERMAL CONDUCTIVITIES OF METALLURGICAL PLASMAS

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Xenon thermal conductivity

GB/T 11205-2009 Rubber.Determination of thermal conductivity by means of hot.Wire method
GB/T 11205-1989 Rubber--Determination of thermal conductivity by means of transient hot-wire method
GB/T 2439-2001 Conducting and dissipative rubbers,vulcanized or thermoplastic--Measurement of resistivity

ESDU - Engineering Sciences Data Unit, Xenon thermal conductivity

ESDU 84010-1984 Thermal conductivity of liquid Aromatic hydrocarbons
ESDU 93017-1993 Thermal conductivity of liquid carboxylic acids
ESDU 00021-2000 Thermal conductivity of liquid aliphatic nitriles
ESDU 88004-1988 Thermal conductivity of liquid mixtures
ESDU 78039-1978 Thermal conductivity of ice@ water and steam.
ESDU 98018-1998 Thermal conductivity of liquid Halogenated aromatic hydrocarbons
ESDU 95018-1995 Thermal conductivity of liquid Aliphatic ethers
ESDU 97008-1997 Thermal conductivity of liquid Aliphatic aldehydes and ketones
ESDU 99012-1999 Thermal conductivity of liquid aliphatic diesters
ESDU 96023-1996 Thermal conductivity of Branched chain liquid aliphatic esters
ESDU 96018-1996 Thermal conductivity of straight chain liquid aliphatic esters
ESDU 83015-1983 Thermal conductivity of liquid heterocyclic nitrogen compounds
ESDU 76030-1976 Thermal conductivity of carbon dioxide gas and liquid.
ESDU 99013 A-2000 Thermal conductivity of liquid glycols@ glycerol and their aqueous solutions
ESDU 94022-1994 Thermal conductivity of liquid halogenated aliphatic hydrocarbons Part 2. Halogenated ethanes
ESDU 99011 A-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: Aliphatic hydrocarbons - alkanes.
ESDU 68023-1978 Thermal conductivity@ viscosity@ heat capacity@ density and Prandtl number of solid@ liquid and gaseous heavy water.
ESDU 02004 A-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: halogenated hydrocarbons - haloethanes.
ESDU 00052-2001 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: oxygenated hydrocarbons - aliphatic esters.
ESDU 02003-2002 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: halogenated hydrocarbons - halomethanes.
ESDU 94023-1994 Thermal conductivity of liquid halogenated aliphatic hydrocarbons Part 3. Halogenated higher hydrocarbons (C3 to C16)
ESDU 00019-2001 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: oxygenated aliphatic hydrocarbons - alcohols@ aldehydes@ ketones and ethers.
ESDU 03008-2003 Thermal conductivity@ viscosity@ isobaric specific heat capacity and Prandtl number of gases at low pressure: Halogenated hydrocarbons - halopropanes@ butanes@ ethylenes@ benzenes.

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Xenon thermal conductivity

IPC TM-650 2.4.50-1995 Thermal Conductivity, Polymer Films

Korean Agency for Technology and Standards (KATS), Xenon thermal conductivity

KS L 1202-2009(2019) Thermal conductivity of whiteware ceramics
KS L 1202-1999 Thermal conductivity of whiteware ceramics
KS L 1202-1986 Thermal conductivity of whiteware ceramics
KS L 3121-2015(2021) Testing method for thermal conductivity of insulating refractory bricks
KS L 3121-1980 Testing method for thermal conductivity of insulating refractory bricks
KS A 0506-1-2013 Methods of calibration for thermal conductivity gauge
KS L 1202-2009 Thermal conductivity of whiteware ceramics
KS A 0506-1-2002(2012) Methods of calibration for thermal conductivity gauge
KS L 3306-2007(2012) Testing method for thermal conductivity of firebricks by hot wire
KS L 3306-1980 Testing method for thermal conductivity of firebricks by hot wire
KS B 0084-2017 Measuring methods of low pressures by thermal conductivity gauge
KS F 2463-2009 Method of thermal conductivity test for materials
KS F 2463-1986 Method of thermal conductivity test for materials
KS L ISO 9869-2006(2021) Thermal insulation－Building elements－In-situ measurement of thermal resistance and thermal transmittance
KS L 1604-2017 Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS L 1604-2017(2022) Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS F 2463-2019 Standard test method of thermal conductivity for materials by means of the guarded hot plate
KS L ISO 8894-2:2022 Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method(parallel)
KS L ISO 8894-2:2016 Refractory materials-Determination of thermal conductivity-Part2:Hot-wire methods(parallel)
KS L ISO 10051-2006(2021) Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
KS M ISO 10051-2012(2017) Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
KS L ISO 10051-2006(2016) Thermal insulation－Moisture effects on heat transfer－Determination of thermal transmissivity of a moist material
KS R ISO 7882:2005 Road vehicles-Brake linings-Determination of thermal conductivity by guarded hot-plate apparatus
KS R ISO 7882:2015 Road vehicles-Brake linings-Determination of thermal conductivity by guarded hot-plate apparatus
KS L 1604-2002 Fine ceramics－Determination of thermal diffusivity, specific heat capacity,and thermal conductivity of monolithic ceramics by laser flash method
KS M ISO 1853:2018 Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity
KS L ISO 8894-1:2022 Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire methods(cross-array and resistance thermometer)
KS L ISO 8894-1:2016 Refractory materials-Determination of thermal coductivity-Part 1:Hot-wire methods(cross-array and resistance thermometer
KS M ISO 1853:2008 Conducting and dissipative rubbers, vulcanized or thermoplastic－Measurement of resistivity
KS M ISO 13787:2013 Thermal insulation products for building equipment and industrial installations — Determination of declared thermal conductivity
KS B 8219-1-2009 Ground source heat pump--Thermal conductivity test mothod--Part 1：Vertical close loop type and energy file type

American Society for Testing and Materials (ASTM), Xenon thermal conductivity

ASTM D7340-07(2018) Standard Practice for Thermal Conductivity of Leather
ASTM D7340-07(2018)e1 Standard Practice for Thermal Conductivity of Leather
ASTM D7896-19 Standard Test Method for Thermal Conductivity, Thermal Diffusivity, and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
ASTM C408-88(1999) Standard Test Method for Thermal Conductivity of Whiteware Ceramics
ASTM F433-02(2020) Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
ASTM C202-19 Standard Test Method for Thermal Conductivity of Refractory Brick
ASTM C408-88(2020) Standard Test Method for Thermal Conductivity of Whiteware Ceramics
ASTM D7896-14 Standard Test Method for Thermal Conductivity, Thermal Diffusivity and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
ASTM C201-93(2019) Standard Test Method for Thermal Conductivity of Refractories
ASTM C201-93(2013) Standard Test Method for Thermal Conductivity of Refractories
ASTM E1952-11 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-23 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM C182-88(1998) Standard Test Method for Thermal Conductivity of Insulating Firebrick
ASTM C182-19 Standard Test Method for Thermal Conductivity of Insulating Firebrick
ASTM C767-93(2009) Standard Test Method for Thermal Conductivity of Carbon Refractories
ASTM C767-93(2004) Standard Test Method for Thermal Conductivity of Carbon Refractories
ASTM C767-93(1998) Standard Test Method for Thermal Conductivity of Carbon Refractories
ASTM C767-20 Standard Test Method for Thermal Conductivity of Carbon Refractories
ASTM C767-93(2013) Standard Test Method for Thermal Conductivity of Carbon Refractories
ASTM C408-88(2016) Standard Test Method for Thermal Conductivity of Whiteware Ceramics
ASTM D6744-01 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ASTM D5334-22 Standard Test Method for Determination of Thermal Conductivity of Soil and Rock by Thermal Needle Probe Procedure
ASTM D5334-22ae1 Standard Test Method for Determination of Thermal Conductivity of Soil and Rock by Thermal Needle Probe Procedure
ASTM E516-95a(2000) Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography
ASTM E516-95A Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography
ASTM E516-95a(2021) Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography
ASTM D6744-06(2011)e1 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ASTM D6744-06(2011) Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ASTM E1952-17 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM D6744-06 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ASTM D6744-06(2017)e1 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique
ASTM E1952-01 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-06 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E1952-98 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM C1113/C1113M-09(2019) Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
ASTM D5334-14 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
ASTM C417-93(1998) Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
ASTM C417-21 Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
ASTM C417-05(2015) Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
ASTM D3464-96(2007) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM E516-95a(2013) Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography
ASTM D6095-99 Standard Test Method for Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D5930-09 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
ASTM D6095-05 Standard Test Method for Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D6095-06 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D6095-12 Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM E1447-09(2016) Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method
ASTM D6095-12(2023) Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM D6095-12(2018) Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials
ASTM F2182-11 Standard Test Method for Measurement of Radio Frequency Induced Heating Near Passive Implants During Magnetic Resonance Imaging

International Organization for Standardization (ISO), Xenon thermal conductivity

ISO 22007-6:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
ISO 22007-2:2022 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
ISO 22007-1:2009 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
ISO 22007-1:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method
ISO 22007-2:2008 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method
ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method
ISO 22007-4:2008 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
ISO 22007-7:2023 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 7: Transient measurement of thermal effusivity using a plane heat source
ISO 22007-3:2008 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 3: Temperature wave analysis method
ISO/TR 7882:1986 Road vehicles; Brake linings; Determination of thermal conductivity by guarded hot-plate apparatus
ISO 2581:1975 Plastics; Rigid cellular materials; Determination of "apparent" thermal conductivity by means of a heat-flow meter
ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity
ISO 24449:2021 Metallic and other inorganic coatings - Determination of thermal conductivity of thermal barrier coatings at elevated temperature
ISO/FDIS 9869-3:2023 Thermal insulation of building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 3: Probe insertion method
ISO 9869-3:2023 Thermal insulation of building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 3: Probe insertion method
ISO 16957:2016 Measurement of apparent thermal conductivity of wet porous building materials by a periodic method
ISO/DIS 9869-3 Thermal insulation of building elements — In-situ measurement of thermal resistance and thermal transmittance — Part 3: Probe insertion method
ISO/TR 22007-5:2011 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
ISO 1853:2018 Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity
ISO 1853:2011 Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity
ISO/TS 5660-3:2012 Reaction-to-fire tests - Heat release, smoke production and mass loss rate - Part 3: Guidance on measurement

SE-SIS, Xenon thermal conductivity

SIS SS 02 42 11-1980 Thermal insulation — Determination of thermal resistance or thermal conductivity by means of a heat-flow meter

Association Francaise de Normalisation, Xenon thermal conductivity

NF T51-227-6*NF EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6 :comparative method for low thermal conductivities using a temperature-modulation technique
NF EN ISO 22007-6:2015 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 6 : méthode comparative pour faibles conductivités thermiques utilisant une technique de modulation de la température
NF T51-227-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1 : general principles.
NF T51-227-1*NF EN ISO 22007-1:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1 : general principles
NF EN ISO 22007-2:2022 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 2 : Méthode de la source plane transitoire (disque chaud)
NF T51-227-2:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2 : transient plane heat source (hot disk) method.
NF T51-227-2*NF EN ISO 22007-2:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2 : transient plane heat source (hot disc) method
NF X10-025:1991 Isolation thermique - Détermination de la résistance thermique et de la conductivité thermique en régime stationnaire - Méthode fluxmétrique
NF T51-227-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4 : laser flash method.
NF EN ISO 22007-3:2012 Plastiques - Détermination de la conductivité thermique et de la diffusivité thermique - Partie 3 : méthode par analyse de l'oscillation de la température
NF EN ISO 6946:2017 Composants et parois de bâtiments - Résistance thermique et coefficient de transmission thermique - Méthodes de calcul
NF T51-227-3*NF EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3 : temperature wave analysis method
NF T51-507-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8 : determination of thermal conductivity
NF A91-240*NF EN 16813:2016 Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
NF ISO 1853:2019 Caoutchoucs vulcanisés ou thermoplastiques conducteurs et dissipatifs - Mesurage de la résistivité
NF P50-788*NF ISO 16957:2018 Measurement of apparent thermal conductivity of wet porous building materials by a periodic method
NF EN 16813:2016 Projection thermique - Mesurage de la conductivité électrique des revêtements métalliques non ferreux obtenus par projection thermique, à l'aide de la méthode par courants de Foucault
XP B43-209*XP CEN/TS 1159-4:2005 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4 : determination of thermal conductivity
NF T46-099*NF ISO 1853:2019 Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity
NF P94-524*NF EN ISO 17628:2018 Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger

German Institute for Standardization, Xenon thermal conductivity

DIN 52613:1977 Thermal Insulation Testings; Determination of Thermal Conductivity by the Tube Method
DIN EN ISO 22007-1:2018-03 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017); German version EN ISO 22007-1:2017
DIN EN ISO 22007-4:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Light flash method (ISO/DIS 22007-4:2023); German and English version prEN ISO 22007-4:2023
DIN EN ISO 22007-4:2023-03 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Light flash method (ISO/DIS 22007-4:2023); German and English version prEN ISO 22007-4:2023 / Note: Date of issue 2023-02-03*Intended as replacement for DIN EN ISO 22007...
DIN EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique (ISO 22007-6:2014); German version EN ISO 22007-6:2015
DIN EN ISO 22007-1:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO/DIS 22007-1:2023); German and English version prEN ISO 22007-1:2023
DIN EN ISO 22007-1:2023-04 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO/DIS 22007-1:2023); German and English version prEN ISO 22007-1:2023 / Note: Date of issue 2023-03-10*Intended as replacement for DIN EN ISO 22007...
DIN 52612-1:1979 Testing of Thermal Insulating Materials; Determination of Thermal Conductivity by the Guarded Hot Plate Apparatus; Test Procedure and Evaluation
DIN EN 16813:2017-02 Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method; German version EN 16813:2016
DIN EN ISO 22007-2:2022-09 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022); German version EN ISO 22007-2:2022
DIN EN ISO 22007-4:2017-11 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017); German version EN ISO 22007-4:2017
DIN EN ISO 11357-8:2020 Plastics - Differential scanning calorimetry - Part 8: Determination of thermal conductivity (ISO/DIS 11357-8:2019); German and English version prEN ISO 11357-8:2019
DIN EN ISO 22007-3:2012-04 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008); German version EN ISO 22007-3:2012
DIN CEN ISO/TR 22007-5:2014-11*DIN SPEC 53367:2014-11 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples (ISO/TR 22007-5:2011); German version CEN ISO/TR 22007-5:2014
DIN 51908:2006-05 Testing of carbon materials - Determination of thermal conductivity at room temperature by means of a comparative method - Solid material
DIN EN ISO 22007-3:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008); German version EN ISO 22007-3:2012
DIN EN ISO 17628:2015 Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger (ISO 17628:2015)
DIN 51908:2022-10 Testing of carbonaceous materials - Determination of thermal conductivity at room temperature by means of a comparative method - Solid material

未注明发布机构, Xenon thermal conductivity

DIN EN ISO 6946:2005 Components – thermal resistance and thermal transmittance – calculation method
BS ISO 12987:2004(2008) Carbonaceous materials for the production of aluminium — Anodes, cathodes blocks, sidewall blocks and baked ramming pastes — Determination of the thermal conductivity using a comparative method

RO-ASRO, Xenon thermal conductivity

STAS 8134-1977 REFRACTARY PRODUCTS Determination of thermal conductivity

IN-BIS, Xenon thermal conductivity

Professional Standard - Aviation, Xenon thermal conductivity

HB 5400-1988 Rubber thermal conductivity test method transient hot wire method

ES-UNE, Xenon thermal conductivity

UNE-EN ISO 22007-2:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 2: Transient plane heat source (hot disc) method (ISO 22007-2:2022)
UNE-EN ISO 22007-1:2018 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2017)
UNE-ISO 9869-1:2023 Thermal insulation - Building elements - In-situ measurement of thermal resistance and thermal transmittance - Part 1: Heat flow meter method
UNE 136021:2019 Finite Element Calculation Method for the determination of the thermal transmittance of masonry built from clay masonry units.

European Committee for Standardization (CEN), Xenon thermal conductivity

EN ISO 22007-6:2015 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
prEN ISO 22007-1 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO/DIS 22007‑1:2023)
EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
EN 16813:2016 Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method

American National Standards Institute （ANSI), Xenon thermal conductivity

ISO/DIS 22007-1:2023 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
ANSI/TAPPI T252 om-2012 pH and electrical conductivity of hot water extracts of pulp, paper, and paperboard
ANSI/ASTM D5930:2001 Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique

Danish Standards Foundation, Xenon thermal conductivity

DS/EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles
DS/EN ISO 6946:2008 Building components and building elements - Thermal resistance and thermal transmittance - Calculation method
DS/ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity
DS/EN 12428:2013 Industrial, commercial and garage doors - Thermal transmittance - Requirements for the calculation
DS/EN ISO 11357-8:2021 Plastics – Differential scanning calorimetry (DSC) – Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
DS/CEN/TS 1159-4:2004 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity

Military Standard of the People's Republic of China-General Armament Department, Xenon thermal conductivity

GJB 10252-2021 Test method for high-temperature steady-state thermal conductivity of thermal insulation materials
GJB 329-1987 Test method for medium-temperature steady-state thermal conductivity of thermal insulation materials
GJB 328-1987 Test method for low-temperature steady-state thermal conductivity of thermal insulation materials
GJB/J 5128-2002 Specification for reference materials for thermal conductivity, specific heat, and coefficient of linear expansion for use in explosives
GJB 8683.9-2015 Test methods for physical parameters of pyrotechnics Part 9: Determination of thermal conductivity using guarded hot plate method
GJB 8683.10-2015 Test methods for physical parameters of pyrotechnics Part 10: Determination of thermal conductivity by differential scanning calorimetry

GOSTR, Xenon thermal conductivity

GOST R 57943-2017 Plastics. Determination of thermal conductivity and thermal diffusivity. Part 4. Laser flash method
GOST R 57830-2017 Composites. Determination of thermal conductivity and thermal diffusivity by modulated temperature differential scanning calorimetry
GOST R 8.986-2020 State system for ensuring the uniformity of measurements. Standard reference data. Chlorobenzene. Thermophysical properties (density, heat capacity, enthalpy, entropy, speed of sound, thermal conductivity and viscosity coefficients)over a temperature ra
GOST R 8.987-2020 State system for ensuriug the uniformity of measurements. Standard reference data. Chlorobenzene. Thermophysical properties (density, heat capacity, enthalpy, entropy, speed of sound, thermal conductivity and viscosity coefficients) over a temperature ran
GOST R 8.947-2018 State system for ensuring the uniformity of measurements. Standard reference data. n-Undecane. Thermophysical properties (density, heat capacity, enthalpy, entropy, sound velocity, thermal conductivity and viscosity coefficients) for the temperature range
GOST R 8.951-2018 State system for ensuring the uniformity of measurements. Standard reference data. n-Dodecane. Thermophysical properties (density, heat capacity, enthalpy, entropy, sound velocity, thermal conductivity and viscosity coefficients) for the temperature range
GOST R 8.946-2018 State system for ensuring the uniformity of measurements. Standard reference data. n-Tridecane. Thermophysical properties (density, heat capacity, enthalpy, entropy, sound velocity, thermal conductivity and viscosity coefficients) for the temperature rang

Taiwan Provincial Standard of the People's Republic of China, Xenon thermal conductivity

CNS 13984-1997 Methods of test for thermal diffusivity,specific heat capacity,and thermal conductivity of fine ceramics by laser flash method

API - American Petroleum Institute, Xenon thermal conductivity

API TDB CHAPTER 12-1976 Technical Data Book Chapter 12 - Thermal Conductivity
API TDB CHAPTER 12-1992 Technical Data Book Chapter 12 - Thermal Conductivity (Fifth Edition)

RU-GOST R, Xenon thermal conductivity

GOST R 50238-1992 Modified wood. Method for determination of heat conductivity
GOST 7076-1999 Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 7076-1978 Building materials. Method of thermal conductivity determination
GOST 7076-1987 Building materials and products. Method of thermal conductivity determination
GOST 12.4.145-1984 Occupational safety standards system. Rubber for special shoes bottom. Method for determination of heat conduction
GOST R 8.722-2010 State system for ensuring the uniformity of measurements. Conductometric liquid analyses. Verification procedure
GOST 8.511-1984 State system for ensuring the uniformity of measurements. State special standard and state verification schedule for means measuring specific heat conduction of solid frames in the range of temperatures from 4,2 to 90 K
GOST 8.141-1975 State system for ensuring the uniformity of measurements. State primary standard and all-union verification schedule for means, measuring specific heat of solid bodies within temperature range of 273,15 up to 700 K
GOST 8.159-1975 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring specific heat-conduction of solid frames in the range of temperatures 400-1800 K

Group Standards of the People's Republic of China, Xenon thermal conductivity

T/CNIA 0169-2022 High thermal conductivity aluminum alloy die castings for heating radiators
T/IAWBS 009-2019 High Voltage Bias Steady-state Temperature Humidity Test for Power Semiconductor Devices
T/CEC 399.3-2020 Specifications for metal-based bulk conductors Part 3: Steel-core high-conductivity heat-resistant aluminum alloy conductors
T/CASAS 020-2021 Test method for thermal conductivity of micro-nano sintered compact: laser flash method

CZ-CSN, Xenon thermal conductivity

CSN 72 7010 Z1-1995
CSN 72 5032-1973 Testing of fired ceram,ic materials Determination of the specific thermal conductivity
CSN 34 6319-1987 Testing of ceramic electrotechnic materials. Methods of the determination of medium specific heat, thermal conductivity and medium temperature conductivity
CSN 72 7306-1987 Thermal insulation materials and pro- ducts. Determination of thermal conduc- tivity by the plate method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Xenon thermal conductivity

ASHRAE 4521-2002 In Situ Measurement of Ground Thermal Conductivity: A Duch Perspective
ASHRAE AC-02-15-3-2002 Ground Thermal Conductivity Testing - Controlled Site Analysis
ASHRAE 4360-2000 Thermal Conductivity of Cementitious Grouts and Impact on Heat Exchanger Length Design for Ground Source Heat Pumps (The Full Text of This Paper Can Be Found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research
ASHRAE DA-00-10-2-2000 Generalized Model for Viscosity and Thermal Conductivity of Trifluoromethane (R-23) (RP-997)
ASHRAE DA-00-13-3-2000 Field Test of a New Method for Determining Soil Formation Thermal Conductivity and Borehole Resistance
ASHRAE SF-98-1-3-1998 Ground-Coupled Heat Pump Loop Design Using Thermal Conductivity Testing and the Effect of Different Backfill Materials on Vertical Bore Length

The Aluminum Association, Xenon thermal conductivity

AA RECA-1991 Report on Electrical Conductivity in Heat Treated Aluminum Alloy Plate

Japanese Industrial Standards Committee (JISC), Xenon thermal conductivity

JIS R 1611:1997 Test methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by laser flash method
JIS R 1611:2010 Measurement methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by flash method
JIS A 1413:1977 Standard method of test for thermal conductivity of heat insulating materials by means of the guarded hot plate
JIS A 1495:2022 Thermal insulation -- Building elements -- In-situ measurement of thermal resistance and thermal transmittance -- Infrared method for frame structure dwelling

AT-ON, Xenon thermal conductivity

ONORM B 6015-2-2000 Determination of thermal conductivity by the guarded hot plate apparatus - Determination of the specific thermal conductivity in building materials
ONORM B 6015 Teil.5-1990 Determination of thermal conductivity by the guarded hot plate apparatus; determination of the nominal value of the thermal conductivity for insulation materials
ONORM B 6015-6-1992 Determination of thermal conductivity by the guarded hot plate apparatus - Determination of the nominal value of the thermal conductivity for mineralic building materials
OENORM EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)

Lithuanian Standards Office , Xenon thermal conductivity

LST EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009)
LST EN ISO 22007-4:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2008)
LST EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
LST EN 12428-2002 Industrial, commercial and garage doors and gates - Thermal transmittance - Requirements for the calculation

AENOR, Xenon thermal conductivity

UNE-EN ISO 22007-1:2012 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 1: General principles (ISO 22007-1:2009)
UNE-EN 12428:2014 Industrial, commercial and garage doors - Thermal transmittance - Requirements for the calculation
UNE-EN 16813:2017 Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method
UNE-ISO 1853:2012 Conducting and dissipative rubbers, vulcanised or thermoplastic. Measurement of resistivity
UNE-EN ISO 17628:2017 Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger (ISO 17628:2015)

CO-ICONTEC, Xenon thermal conductivity

ICONTEC 3223-1991

National Aeronautics and Space Administration (NASA), Xenon thermal conductivity

NASA NACA-TN-3143-1954 Experimental determination of thermal conductivity of low-density ice
NASA-TR-R-132-1962 Estimated Viscosities and Thermal Conductivities of Gases at High Temperatures
NASA-CR-2440-1974 Viscosity and thermal conductivity coefficients of gaseous and liquid oxygen

Indonesia Standards, Xenon thermal conductivity

SNI ISO 8894-2:2010 Refractory materials - Determination of thermal conductivity - Part 2: Hot-wire methods (parallel)
SNI ISO 1853:2014 Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity

KR-KS, Xenon thermal conductivity

KS L ISO 8894-2-2022 Refractory materials — Determination of thermal conductivity — Part 2: Hot-wire method(parallel)
KS L ISO 8894-2-2016 Refractory materials-Determination of thermal conductivity-Part2:Hot-wire methods(parallel)
KS M ISO 1853-2018 Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity
KS L ISO 8894-1-2022 Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire methods(cross-array and resistance thermometer)

Sichuan Provincial Standard of the People's Republic of China, Xenon thermal conductivity

DB51/T 2434-2017 Transient Measurement of Material Thermal Conductivity and Thermal Diffusivity—Pulse Method

BELST, Xenon thermal conductivity

STB 1618-2006 Building materials and products. Method of determination of steady - state thermal conductivity

IT-UNI, Xenon thermal conductivity

UNI EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity

Standard Association of Australia （SAA）, Xenon thermal conductivity

AS 1774.14:1992 Refractories and refractory materials - Physical test methods - Thermal conductivity
AS 1774.14:2008

Society of Automotive Engineers (SAE), Xenon thermal conductivity

SAE AMS2658-1980 HARDNESS AND CONDUCTIVITY INSPECTION OF HEAT TREATED ALUMINUM ALLOY PARTS

ZA-SANS, Xenon thermal conductivity

SANS 11853:2003 Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Xenon thermal conductivity

GJB 5382.9-2005 Test methods of physical parameter for pyrotechnic. Part 9: Determination of thermal conductivity. Guarded hot plate mehtod
GJB 5382.10-2005 Test methods of physical parameter for pyrotechnic. Part 10: Determination of thermal conductivity. DSC method

CH-SNV, Xenon thermal conductivity

SN EN ISO 11357-8:2021 Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021)

PL-PKN, Xenon thermal conductivity

PN-EN ISO 11357-8-2021-08 E Plastics--Differential scanning calorimetry (DSC)--Part 8: Determination of thermal conductivity (ISO 11357-8:2021)
PN C82055-11-1989 Test methods of pressed carbon products Determination of thermal specific conductivity with comparative method

Professional Standard - Energy, Xenon thermal conductivity

NB/T 10973-2022

CEN - European Committee for Standardization, Xenon thermal conductivity

CEN ISO/TR 22007-5:2014 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
PREN 993-14-2008 Methods of testing insulating and dense shaped refractory products - Part 14: Determination of thermal conductivity by the hot wire (cross-array) and resistance thermometer methods

Professional Standard - Electron, Xenon thermal conductivity

SJ 2857.1-1988 Methods for measurement of thermoelectric refrigeration materials properties--Methods for measurement of thermal conductivity

Professional Standard - Geology, Xenon thermal conductivity

DZ/T 0276.14-2015 Regulation for testing the physical and mechanical properties of rock.Part 14:Test for determining the thermal conductivity of rock

Professional Standard - Non-ferrous Metal, Xenon thermal conductivity

YS/T 63.3-2006 Carbonaceous materials used in the production of aluminium-Part 3:Determination of the thermal conductivity using a comparative method

工业和信息化部, Xenon thermal conductivity

YS/T 63.3-2016 Testing methods for carbon materials for aluminum use Part 3: Comparative method for determination of thermal conductivity

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, Xenon thermal conductivity

JEDEC JESD313B-1975 Conduction Cooled Power Transistors, Thermal Resistance Measurements of Revision of EIA-313-B formerly RS-313-B

Professional Standard - Electricity, Xenon thermal conductivity

DL/T 1629-2016 Coal consumption rate composition analysis technical guidelines for thermal power units based on the second law of thermodynamics method

International Electrotechnical Commission (IEC), Xenon thermal conductivity

IEC 62830-5:2021 Semiconductor devices - Semiconductor devices for energy harvesting and generation - Part 5: Test method for measuring generated power from flexible thermoelectric devices