What samples are used for method validation?

What samples are used for method validation?, Total:482 items.

In the international standard classification, What samples are used for method validation? involves: Ferroalloys, Fuels, Construction materials, Road engineering, Animal feeding stuffs, Products of the chemical industry, Refractories, Testing of metals, Wastes, Waxes, bituminous materials and other petroleum products, Quality, Pipeline components and pipelines, Nuclear energy engineering, Plastics, Metalliferous minerals, Products of the textile industry, Non-metalliferous minerals, Pulps, Materials for the reinforcement of composites, Linear and angular measurements, Microbiology, Meat, meat products and other animal produce, Inorganic chemicals, Analytical chemistry, Biology. Botany. Zoology, Earthworks. Excavations. Foundation construction. Underground works, Raw materials for rubber and plastics, Tobacco, tobacco products and related equipment, Soil quality. Pedology, Aircraft and space vehicles in general, Paper and board, Optics and optical measurements, General methods of tests and analysis for food products, Air quality, Environmental testing, Water quality, Welding, brazing and soldering, Wood, sawlogs and sawn timber, Adhesives, Rubber and plastics products, Fertilizers, Petroleum products in general, Structures of buildings, Glass, Metrology and measurement in general, Radiation protection, Test conditions and procedures in general, Electrical engineering in general, Electricity. Magnetism. Electrical and magnetic measurements, Radiation measurements, Protection against crime, Petroleum, petroleum products and natural gas handling equipment, Powder metallurgy, Equipment for petroleum and natural gas industries, Components for electrical equipment, Paint ingredients, Protection against fire, Thermodynamics and temperature measurements, Surface treatment and coating, Paints and varnishes, Edible oils and fats. Oilseeds, Sterilization and disinfection, Measurement of fluid flow, Processes in the food industry.

GSO, What samples are used for method validation?

GSO ISO 7373:2013 Ferroalloys -- Experimental methods for checking the precision of sample division
GSO ISO 1686:2016 Sodium and potassium silicates for industrial use -- Samples and methods of test -- General
OS GSO ISO 1686:2016 Sodium and potassium silicates for industrial use -- Samples and methods of test -- General
BH GSO ISO 1686:2017 Sodium and potassium silicates for industrial use -- Samples and methods of test -- General
GSO BS 1377-1:2024 Methods of test for soils for civil engineering purposes - General requirements and sample preparation
OS GSO ISO 13495:2015 Foodstuffs -- Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid
BH GSO ISO 13495:2017 Foodstuffs -- Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid
GSO ISO 12787:2013 Cosmetics -- Analytical methods -- Validation criteria for analytical results using chromatographic techniques
BH GSO ISO 13947:2017 Metallic powders -- Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
OS GSO ISO 13947:2015 Metallic powders -- Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
GSO ISO 13947:2015 Metallic powders -- Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
OS GSO ISO 9073-18:2014 Textiles -- Test methods for nonwovens -- Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test

VN-TCVN, What samples are used for method validation?

TCVN 5347-1991 Graphite.Methods for sampling and preparation of samples for testing
TCVN 4547-1994 Barges for oil produsts.Method and means of verification
TCVN 3121-2-2003 Mortar for masonry.Test methods.Part 2: Sampling and preparation of sample

SCC, What samples are used for method validation?

BS 4658:1970 Methods of test for textiles - preparation of laboratory test samples and test specimens for chemical testing
BS PD CEN/TS 17329-1:2019 Foodstuffs. General guidelines for the validation of qualitative real-time PCR methods-Single-laboratory validation
NS 9034:1981 Glycerines for industrial use — Samples and test methods — General
AASHTO T 146-1996(2013) Standard Method of Test for Wet Preparation of Disturbed Soil Samples for Test
SN-CEN/TS 17455:2020 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
BS PD CEN/TS 17455:2020 Animal feeding stuffs. Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
DIN CEN/TS 17329-1:2021 Foodstuffs – General guidelines for the validation of qualitative real-time PCR methods – Part 1: Single-laboratory validation; German version CEN/TS 17329-1:2021
SN-CEN/TS 17329-1:2021 Foodstuffs – General guidelines for the validation of qualitative real-time PCR methods – Part 1: Single-laboratory validation
SN-CEN/TS 17329-1:2019 Foodstuffs – General guidelines for the validation of qualitative real-time PCR methods – Part 1: Single-laboratory validation
BS 4088-1.1:1994 Carpet cleaning products. Methods of sampling and test-General methods for formulations used in liquid form
BS 4088-1.3:1995 Carpet cleaning products. Methods of sampling and test-General methods for impregnated powder formulations
BS 6920-2-2.1:1988 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect onthe quality of the water. Methods of test-Samples for testing
BS 6920-2-2.1:1990 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water. Methods of test-Samples for testing
DANSK DS/ISO 13495:2013 Foodstuffs - Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid
NS-EN 13880-6:2004 Hot applied joint sealants — Part 6: Method for the preperation of samples for testing
NS-EN 12697-21:2020 Bituminous mixtures — Test methods — Part 21: Indentation using plate specimens
BS 2782-1 METHOD 140C:1993 Methods of testing plastics. Thermal properties-Determination of the combustibility of specimens using a 125 mm flame source
AS 1301.002S:1991 Methods of test for pulp and paper - Preparation of wood samples for chemical analysis
DANSK DS/ISO 12787:2012 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
AS P1.P2M:1959 Methods of test for pulp and paper (metric units), Method P2M: Preparation of wood samples for chemical analysis
BS 598-101:1987 Sampling and examination of bituminous mixtures for roads and other paved areas-Methods for preparatory treatments of samples for analysis
DANSK DS/EN 12697-54:2019 Bituminous mixtures – Test methods – Part 54: Curing of specimen for test of mixtures with bitumen emulsion
11/30204598 DC BS ISO 13495. Foodstuffs. Principles of selection and criteria of validation for the varietal identification methods using specific nucleic acid analysis
DANSK DS/ISO 5257:2023 Bamboo structures – Engineered bamboo products – Test methods for determination of mechanical properties using small size specimens
NS-EN ISO 18183-3:2024 Geometrical product specifications (GPS) - Partition - Part 3: Methods used for specification and verification (ISO 18183-3:2024)
UNE-EN 12697-21:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens
DANSK DS/EN 12697-21/AC:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens
BS 4088-1.2:1995 Carpet cleaning products. Methods of sampling and test-Determination of cleaning performance of formulations designed for use with spray extraction machines
AASHTO T 247-2010(2019) Standard Method of Test for Preparation of Test Specimens of Hot Mix Asphalt (HMA) by Means of California Kneading Compactor (ASTM Designation: D1561-92)
AASHTO T 247-2022 Standard Method of Test for Preparation of Test Specimens of Hot Mix Asphalt (HMA) by Means of California Kneading Compactor (ASTM Designation: D1561-92)
AASHTO T 312-2004 Standard Method of Test for Preparing and Determining the Density of Hot-Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
UNE-EN 1597-1:1998 WELDING CONSUMABLES. TEST METHODS. PART 1: TEST PIECE FOR ALL-WELD METAL TEST SPECIMENS IN STEEL, NICKEL AND NICKEL ALLOYS.
AS 2445.3.1:1982 Methods of sampling and testing retroreflective materials and devices for road traffic control purposes, Part 3.1: Raised pavement markers (retroreflective and non-retroreflective) - Sampling and conditioning of samples
DIN EN ISO 18183-3 E:2022 Draft Document - Geometrical product specifications (GPS) - Partition - Part 3: Methods used for specification and verification (ISO/DIS 18183-3:2022); German and English version prEN ISO 18183-3:2022
AWWA WQTC71355 U.S. Environmental Protection Agency Method 524.3 for Analysis of Volatile Organic Compounds (VOCs) in Finished Drinking Water: Optimized Instrument Parameters and Method Validation
BS ISO 13947:2007 Metallic powders. Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
AASHTO T 312-2011 Standard Method of Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
AASHTO T 312-2009 Standard Method of Test for Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
AS 4133.3.4:1993 Methods of testing rocks for engineering purposes, Method 3.4: Rock swelling and slake durability tests - Determination of the slake durability index of rock samples
05/30143562 DC ISO 105-J05. Textiles. Tests for colour fastness. Part J05. Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCONO2)
DANSK DS/EN 12697-7:2014 Bituminous mixtures – Test methods for hot mix asphalt – Part 7: Determination of bulk density of bituminous specimens by gamma rays
UNE-EN 12697-7:2003 Bituminous mixtures - Test methods for hot mix asphalt - Par 7: Determination of bulk density of bituminous specimens by gamma rays.
DANSK DS/EN 14891:2017 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives – Requirements, test methods, assessment and verification of constancy of performance, classification and marking
DANSK DS/EN ISO 9073-18:2008 Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test
05/30142460 DC BS EN 15416-2. Adhesives for load bearing timber structures. Test methods. Part 2. Static load test of multiple bondline specimens in compression shear
DANSK DS/ISO 4259-4:2021 Petroleum and related products – Precision of measurement methods and results – Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory
NS-EN ISO 4259-4:2022 Petroleum and related products - Precision of measurement methods and results - Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory (ISO 4259...
DANSK DS/EN ISO 4259-4:2022 Petroleum and related products – Precision of measurement methods and results – Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory (ISO 4259...
NS-EN 14891:2017 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking
06/30148433 DC ISO 9073-18. Textiles. Test methods for nonwovens. Part 18. Determination of breaking strength and elongation of nonwoven materials using the grab tensile test

British Standards Institution (BSI), What samples are used for method validation?

BS EN 15413:2011 Solid recovered fuels. Methods for the preparation of the test sample from the laboratory sample
BS EN 13880-6:2004 Hot applied joint sealants - Method for the preparation of samples for testing
BS PD CEN/TS 17174:2018 Animal feeding stuffs: Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of heavy metals
PD CEN/TS 17455:2020 Animal feeding stuffs. Methods of sampling and analysis. Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
BS EN ISO 13437:1998 Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory
BS EN ISO 18183-3:2024 Geometrical product specifications (GPS). Partition - Methods used for specification and verification
BS 5293-19:1991 Sampling and testing carbon black for use in the rubber industry - Preparation of samples for determination of dibutyl phthalate absorption number (compressed sample)
BS 598-101:2004 Sampling and examination of bituminous mixtures for roads and other paved areas - Methods for preparatory treatments of samples for analysis
BS ISO 5257:2023 Bamboo structures. Engineered bamboo products. Test methods for determination of mechanical properties using small size specimens
BS ISO 12787:2011 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
BS EN 1015-2:1999 Methods of test for mortar for masonry - Bulk sampling of mortars and preparation of test mortars
BS 1377-1:2016 Methods of test for soils for civil engineering purposes. Part 1: General requirements and sample preparation
PD 6537-2-1994 Variability of methods of test for textiles and reports of inter-laboratory trials on certain methods. Phase 2. BS 3320, BS 2010 and BS 1932
23/30426285 DC BS ISO 5257. Bamboo Structures. Engineered bamboo products. Test methods for determination of mechanical properties using small size specimens
BS EN 12697-31:2004 Bituminous mixtures - Test methods for hot mix asphalt - Specimen preparation gyratory compactor
BS ISO 22889:2013 Metallic materials. Method of test for the determination of resistance to stable crack extension using specimens of low constraint
BS 6920-2.1:2014 Suitability of non-metallic materials and products for use in contact with water intended for human consumption with regard to their effect on the quality of the water. Methods of test. Samples for testing
BS 6920-2.1:2000+A3:2008 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water — Part 2: Methods of test — Section 2.1: Samples for testing
BS ISO 7503-2:2016 Measurement of radioactivity. Measurement and evaluation of surface contamination. Test method using wipe-test samples
BS EN 1076:2009 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
BS 8571:2018 Method of test for determination of fracture toughness in metallic materials using single edge notched tension (SENT) specimens
22/30449711 DC BS EN ISO 18183-3. Geometrical product specifications (GPS). Partitioning - Part 3. Methods used for specification and verification
BS EN 12697-23:2003 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the indirect tensile strength of bituminous specimens
BS DD ISO/TS 7821:2005 Tobacco and tobacco products - Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
BS ISO 15592-2:2001 Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Atmosphere for conditioning and testing
BS EN 12697-7:2014 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-56:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-7:2002 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the bulk density of bituminous specimens by gamma rays
BS EN 12697-48:2021 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-55:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS EN 12697-53:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS ISO 13947:2011 Metallic powders. Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
BS EN 12697-54:2019 Bituminous mixtures. Test methods for hot mix asphalt. Determination of bulk density of bituminous specimens by gamma rays
BS 6920-2.1:2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water - Methods of test - Samples for testing
BS 2000-512:2005 Methods of test for petroleum and its products Part 512: Petroleum and related products — Preparation of a test portion of high-boiling liquids for the determination of water content — Nitrogen purge method (Identical with IP 512:2005)
BS EN ISO 10289:2001 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates - Rating of test specimens and manufactured articles subjected to corrosion tests
BS EN ISO 11125-1:1994 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Sampling
BS EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
BS EN 13528-3:2003(2008) Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
BS EN ISO 11127-1:2011 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast cleaning abrasives. Sampling
BS EN ISO 11127-1:2021 Preparation of steel substrates before application of paints and related products. Test methods for non-metallic blast-cleaning abrasives. Sampling
BS EN 14891:2017 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives. Requirements, test methods, assessment and verification of constancy of performance, classification and marking
23/30472751 DC Draft BS 13947 Metallic powders. Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
BS 6043-1-1.2:1981 British Standard Methods of sampling and test for Carbonaceous materials used in aluminium manufacter Part 1. Electrode pitch Section 1.2 Determination of water content (Dean and Stark method)
BS EN ISO 14937:2010 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
BS EN ISO 14937:2009 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices

European Committee for Standardization (CEN), What samples are used for method validation?

EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
EN 13892-1:2002 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test
EN 12697-21:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens
EN ISO 18592:2019 Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2019)
EN ISO 18592:2009 Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2009)
EN 12697-54:2019 Bituminous mixtures - Test methods - Part 54: Curing of specimen for test of mixtures with bitumen emulsion
EN 1076:2009 Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods
EN ISO 18183-3:2024 Geometrical product specifications (GPS) - Partition - Part 3: Methods used for specification and verification (ISO 18183-3:2024)
prEN ISO 18183-3 Geometrical product specifications (GPS) - Partition - Part 3: Methods used for specification and verification (ISO/DIS 18183-3:2022)
FprEN 12697-7-2021 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays
EN 12697-8:2003 Bituminous mixtures Test methods for hot mix asphalt Part 8: Determination of void characteristics of bituminous specimens
PD CEN/TR 10350:2009 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
EN ISO 4259-4:2022 Petroleum and related products - Precision of measurement methods and results - Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory (ISO 4259-4:2021)
EN 14891:2017 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements@ test methods@ assessment and verification of constancy of performance@ classification and marking
EN ISO 11125-1:1997 Preparation of Steel Substrates before Application of Paints and Related Products - Test Methods for Metallic Blast-Cleaning Abrasives - Part 1: Sampling
EN ISO 14937:2009 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009)
EN 15416-2:2007 Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 2: Static load test of multiple bondline specimens in compression shear
EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance

Standard Association of Australia （SAA）, What samples are used for method validation?

AS/NZS 2891.2.2:2014 Asphalt Sampling and Testing Methods Sample Preparation Compaction of Asphalt Test Samples Using a Rotary Compactor
AS 1289.1.2.1:1998(R2013) Soil Testing Methods for Engineering Use Standard Method for Sampling and Preparing Disturbed Samples of Soils
AS 1289.1.1:2001/Amdt 2:2008 Soil testing methods for engineering purposes. Sampling and preparation of soil. Preparation of disturbed soil samples for testing.
AS 1289.1.1:2001/Amdt 1:2002 Soil testing methods for engineering purposes. Sampling and preparation of soil. Preparation of disturbed soil samples for testing.
AS 2001.2.25.2:2006 Methods of test for textiles - Physical tests - Determination of the abrasion resistance of fabrics by the Martindale method - Determination of specimen breakdown
AS 2001.2.3.2:2001 Methods of test for textiles - Physical tests - Determination of maximum force using the grab method (ISO 13934-2:1999, MOD)
AS 2001.2.3.2:2001(R2016) Methods of test for textiles - Physical tests - Determination of maximum force using the grab method (ISO 13934-2:1999, MOD)
AS/NZS 1301.002s:2004 Methods of test for pulp and paper - Preparation of wood samples for chemical analysis
AS 2001.2.10:1986 Methods of test for textiles - Physical tests - Determination of the tear resistance of woven textile fabrics by the wing-rip method
AS 4969.14:2009 Analysis of Acid Sulfate Soils Dry Sample Test Method Calculating the Acidogenic Potential of Acid Sulfate Soils Using the Acid-Base Accounting Method
AS 5013.11.2:2006 Food microbiology - Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Specific rules for the preparation of meat and meat products

Professional Standard - Agriculture, What samples are used for method validation?

328药典四部-2020 9000 Guidelines 9012 Guidelines for Validation of Quantitative Analysis Methods of Biological Samples
313药典四部-2015 9000 Guidelines 9012 Guidelines for Validation of Quantitative Analysis Methods of Biological Samples
GB/T 43731-2024 General requirements for validation and validation of biological sample processing methods in biobanks

CZ-CSN, What samples are used for method validation?

CSN ISO 1614:1994 Glycerines for industrial use.Samples and test methods.General
CSN 44 1304-1989 Solid fuels. Methods of sampling and preparation of samples for laboratory testing

AASHTO - American Association of State Highway and Transportation Officials, What samples are used for method validation?

T 146-1996 Standard Method of Test for Wet Preparation of Disturbed Soil Samples for Test
T87-1986 Standard Method of Test for Dry Preparation of Disturbed Soil and Soil Aggregate Samples for Test (Twentieth Edition)
T 87-1986 Standard Method of Test for Dry Preparation of Disturbed Soil and Soil Aggregate Samples for Test (HM-22; Part IIA)

Professional Standard - Postal Service, What samples are used for method validation?

YZ/T 0065-2002 Guidelines for sampling inspection methods of postal equipment and supplies

German Institute for Standardization, What samples are used for method validation?

DIN CEN/TS 17455:2020-07 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins; German version CEN/TS 17455:2020
DIN EN 13892-1:2003 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test; German version EN 13892-1:2002
DIN EN 13880-6:2004 Hot applied joint sealants - Part 6: Test method for the preparation of samples for testing; German version EN 13880-6:2003
DIN EN 12697-21:2020-05 Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens; German version EN 12697-21:2020
DIN EN ISO 18183-3:2022-12 Geometrical product specifications (GPS) - Partition - Part 3: Methods used for specification and verification (ISO/DIS 18183-3:2022); German and English version prEN ISO 18183-3:2022 / Note: Date of issue 2022-11-04
DIN EN ISO 15792-1:2008 Welding consumables - Test methods - Part 1: Test methods for all-weld metal test specimens in steel, nickel and nickel alloys (ISO 15792-1:2000); German version EN ISO 15792-1:2008
DIN EN 12697-21:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens; German version EN 12697-21:2012
DIN 32525-4:2010 Welding consumables - Testing of welding consumables by means of weld metal specimens - Part 4: Test piece for determining the hardness of surfacing
DIN EN 302-8:2017 Adhesives for load-bearing timber structures - Test methods - Part 8: Static load test of multiple bond line specimens in compression shear; German version EN 302-8:2017
DIN EN 12697-7:2022 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays
DIN EN 12697-7:2020 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays; German and English version prEN 12697-7:2020
DIN EN 12697-7:2022-04 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays; German version EN 12697-7:2022
DIN ISO 7503-2:2017 Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 2: Test method using wipe-test samples (ISO 7503-2:2016)
DIN EN 12697-28:2020 Bituminous mixtures - Test methods - Part 28: Preparation of samples for determining binder content, water content and grading
DIN EN ISO 18592:2010 Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2009); German version EN ISO 18592:2009
DIN EN ISO 11125-1:1997 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993); German version EN ISO 11125-1:1997
DIN EN ISO 9073-18:2008-08 Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test (ISO 9073-18:2007); German version EN ISO 9073-18:2008 / Note: To be replaced by DIN EN ISO 9073-18 (20...
DIN EN 14891:2017-05 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Requirements, test methods, assessment and verification of constancy of performance, classification and marking; German version EN 14891:2017 / Note: To be...

ES-UNE, What samples are used for method validation?

UNE-CEN/TS 17455:2021 Animal feeding stuffs - Methods of sampling and analysis - Performance criteria for single laboratory validated and ring-trial validated methods of analysis for the determination of mycotoxins
ISO/FDIS 18183-3:2023 Geometrical product specifications (GPS) — Partition — Part 3: Methods used for specification and verification
UNE-EN 12697-7:2022 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays

International Organization for Standardization (ISO), What samples are used for method validation?

ISO/TS 22176:2020 Cosmetics — Analytical methods — Development of a global approach for validation of quantitative analytical methods
ISO 11597:1995 Verification of samples of uranyl or plutonium nitrate solutions by density measurements
ISO 3085:2019 Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement
ISO 18183-3:2023 Geometrical product specifications (GPS) — Partition — Part 3: Methods used for specification and verification
ISO 18183-3:2024 Geometrical product specifications (GPS) — Partition — Part 3: Methods used for specification and verification
ISO 25597:2013 Stationary source emissions - Test method for determining PM<(Index)2,5> and PM<(Index)10> mass in stack gases using cyclone samplers and sample dilution
ISO/DIS 5257 Bamboo Structures – Engineered bamboo products – Test methods for determination of mechanical properties using small size specimens
ISO 7503-2:2016 Measurement of radioactivity - Measurement and evaluation of surface contamination - Part 2: Test method using wipe-test samples
ISO/TS 7821:2005 Tobacco and tobacco products - Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
ISO 13947:2007 Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
ISO 22889:2007 Metallic materials — Method of test for the determination of resistance to stable crack extension using specimens of low constraint (Second Edition)
ISO 13947:2011 Metallic powders - Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
ISO/CD 13947:2023 Metallic powders — Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
ISO/DIS 13947:2022 Metallic powders — Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
ISO 4259-4:2021 Petroleum and related products — Precision of measurement methods and results — Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard te
ISO 11125-1:1993 Preparation of steel substrates before application of paints and related products; test methods for metallic blast-cleaning abrasives; part 1: sampling
ISO 11125-1:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling
ISO/TR 7821:1982 Tobacco; Preparation and constitution of identical samples from the same lot (Code of practice, for collaborative studies for evaluating methods of test)
ISO 11127-1:2011 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling
ISO 11127-1:1993 Preparation of steel substrates before application of paints and related products; test methods for non-metallic blast-cleaning abrasives; part 1: sampling
ISO 14937:2009 Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices

Association Francaise de Normalisation, What samples are used for method validation?

XP ISO/TS 22176:2020 Cosmetics - Analytical methods - Development of a global approach for the validation of quantitative analytical methods
NF P14-204-1*NF EN 13892-1:2003 Methods of test for screed materials - Part 1 : sampling, making and curing specimens for test.
NF P98-880-6:2004 Hot applied joint sealants - Part 6 : test method for the preparation of samples for testing.
NF G08-011:1987 Textiles. Fibres, yarns, fabrics, clothes. Methods of sampling applicable to reception control of batches.
NF P98-818-21*NF EN 12697-21:2020 Bituminous mixtures - Test methods - Part 21 : indentation using plate specimens
XP X31-131:2020 Test methods for the environmental characterization of solid matrices - Characterization of analytical methods - Guide for the validation of physico-chemical analytical methods in soil, sediment and sludge matrices and for the selection of test samples
NF V03-045*NF ISO 13495:2014 Foodstuffs - Principles of selection and criteria of validation for the varietal identification methods using specific nucleic acid
NF EN ISO 18183-3:2024 Geometrical Product Specification (GPS) - Partition - Part 3: methods used for specification and verification
NF ISO 12787:2012 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
NF A81-054-1:2008 Welding consumables - Test methods - Part 1 : test methods for all-weld metal test specimens in steel, nickel and nickel alloys.
NF U44-100:1976 Organic products. Overall presentation of sampling and test methods applicable to "straight" industrial products used in agriculture.
NF X43-052*NF ISO 25597:2014 Stationary source emissions - Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution
NF P98-818-20:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 20 : indentation using cube or Marshall specimens (CY).
NF P98-818-12:2008 Bituminous mixtures - Test methods for hot mix asphalt - Part 12 : determination of the water sensitivity of bituminous specimens.
NF P98-818-7*NF EN 12697-7:2022 Bituminous mixtures - Test methods - Part 7 : determination of the bulk density of bituminous specimens by gamma rays
NF EN 12697-7:2022 Bituminous mixtures - Test methods - Part 7: determination of the apparent density of bituminous specimens using gamma rays
NF G07-018-5*NF EN ISO 105-J05:2007 Textiles - Tests for colour fastness - Part J05 : method for the instrumental assessment of the colour inconstancy of a specimen with change of illuminant (CMCCON02)
NF V37-023:1983 Identical sample preparation and composition? Same Batch (Practical Code for Conducting Comparative Tests Relevant to the Quality of Test Methods)
NF P98-818-30:2012 Bituminous mixtures - Test methods for hot mix asphalt - Part 30 : specimen preparation by impact compactor.
NF EN 14891:2017 Waterproofing products applied in liquid phase used under glued tiles - Specifications, test methods and verification of constancy of performance, classification and marking
NF P98-818-28*NF EN 12697-28:2020 Bituminous mixtures - Test methods - Part 28 : preparation of samples for determining binder content, water content and grading
NF EN 12393-3:2013 Foods of plant origin - Multi-residue methods for determining pesticide residues by GC or LC-MS/MS - Part 3: determination and confirmation tests
NF X41-568:2014 Wood preservatives - Laboratory method for obtaining samples for analysis to measure losses after washing with water or synthetic seawater
NF P98-818-7:2003 Bituminous mixtures - Test methods for hot mix asphalt - Part 7 : determination of bulk density of bituminous specimens by gamma rays.
NF T35-507-1:1997 Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives. Part 1 : sampling.
NF T35-509-1:2012 Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1 : sampling.

Professional Standard - Ferrous Metallurgy, What samples are used for method validation?

YB/T 4016-1991 Method for acceptance of samples of refractory products for glass melting kilns

American Society for Testing and Materials (ASTM), What samples are used for method validation?

ASTM E82-91(2001) Standard Test Method for Determining the Orientation of a Metal Crystal
ASTM E829-94 Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
ASTM D3376-88(2000) Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
ASTM D3496-99(2005) Standard Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing
ASTM D5015-15(2022) Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM D5520-94 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
ASTM D5520-18 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
ASTM D5520-11 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
ASTM D6720-07 Standard Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method)
ASTM E1247-92(2000) Standard Test Method for Identifying Fluorescence in Object-Color Specimens by Spectrophotometry
ASTM D5015-15 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination
ASTM F2231-02 Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
ASTM F2231-02e1 Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
ASTM F2231-02(2008) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
ASTM F2231-02(2013) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
ASTM D2481-81(2002) Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens
ASTM D2481-05 Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens
ASTM D6966-13 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM D3975-93(1999) Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM D2095-96(2002) Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D2095-96(2008) Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D5083-10 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D1997-91(2008) Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
ASTM D1997-91(2008)e1 Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
ASTM F2231-02(2019) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
ASTM D1997-13 Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
ASTM F2018-00(2010) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM D4278-95 Standard Test Method for Wet Ashing Procedure for Preparing Wood Samples for Inorganic Chemical Analysis
ASTM F2018-00(2006) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00e1 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM D8438/D8438M-23 Standard Test Methods for Use of Hyperspectral Sensors for Soil Nutrient Analysis of Ground Based Samples
ASTM D5083-10e1 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5762-12 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D4239-94 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
ASTM D4239-10 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
ASTM E1967-98(2003) Standard Test Method for the Automated Determinaton of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
ASTM D5142-02a Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02ae1 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D4239-97e1 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
ASTM D4239-04a Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
ASTM D4239-04 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
ASTM E1967-19 Standard Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
ASTM d4239-18 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
ASTM D4239-08 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
ASTM D423-66(1972) Standard Test Method for Determination of Sulfur in Coal and Coke Analytical Samples by High Temperature Tube Furnace Combustion Method
ASTM D1997-91(2001) Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
ASTM D1997-91(1996) Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
ASTM D5083-02 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5083-96 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D3975-93(2003) Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM C1800/C1800M-16 Standard Test Method for Determining Density of Roller-Compacted Concrete Specimens Using the Gyratory Compactor
ASTM D5083-08 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
ASTM D5762-11 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM D5142-04 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-09 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D4278-02 Standard Test Method for Wet Ashing Procedure for Preparing Wood Samples for Inorganic Chemical Analysis
ASTM D7343-20 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7343-12(2017) Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7343-18 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM E1967-98 Standard Test Method for the Automated Determinaton of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
ASTM D4239-05 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High Temperature Tube Furnace Combustion Methods
ASTM D4239-12 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
ASTM D4239-14e1 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
ASTM D4239-18e1 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
ASTM D5762-12(2017) Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
ASTM E3331-22 Standard Test Method for Measuring Target Modulus Using the Light Weight Deflectometer on Laboratory Compaction Characteristic Samples
ASTM D3975-93(2019) Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM A927/A927M-99 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
ASTM D4239-10e1 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
ASTM A927/A927M-18(2022) Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method
ASTM D4239-13e1 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
ASTM D4239-14 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
ASTM D4239-14e2 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
ASTM E1387-01 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography
ASTM D3012-04 Standard Test Method for Thermal-Oxidative Stability of Propylene Plastics Using a Specimen Rotator Within an Oven
ASTM D3012-07 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
ASTM D3012-13 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
ASTM D6849-02(2007) Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
ASTM D6866-08 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-22 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6866-21 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM E2330-04 Standard Test Method for Determination of Trace Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ASTM D6866-24 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D3012-00 Standard Test Method for Thermal-Oxidative Stability of Propylene Plastics Using a Specimen Rotator Within an Oven
ASTM D6849-02 Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
ASTM A697-98 Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
ASTM D6866-12 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM D6925-03 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D1188-07e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D1188/D1188M-22 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Coated Samples
ASTM D8295-19 Standard Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements
ASTM D5373-14e2 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke
ASTM D6925-23 Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
ASTM D6849-13(2021) Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
ASTM D6849-02(2012) Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
ASTM D6849-13 Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
ASTM D6849-22 Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods
ASTM D7169-20 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D7169-18 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D7169-19 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D5628-07 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D5628-06 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D716-86(1999) Standard Test Methods for Evaluating Mica Pigment
ASTM D716-86(2003) Standard Test Methods for Evaluating Mica Pigment
ASTM E1618-19 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM D8230-19 Standard Test Method for Measurement of Volatile Silicon-Containing Compounds in a Gaseous Fuel Sample Using Gas Chromatography with Spectroscopic Detection
ASTM D7169-20e1 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM D7169-16 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM E2330-12 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
ASTM D1188-96e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D1188-96(2002) Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D1188-96(2002)e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
ASTM D3983-98 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM D3983-98(2004) Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM E1530-99 Standard Test Method for Evaluating the Resistance to Thermal Transmission of Thin Specimens of Materials by the Guarded Heat Flow Meter Technique
ASTM E3331-22a Standard Test Method for Measuring Target Modulus Using Light Weight Deflectometer (LWD) on Compacted Proctor Mold Samples
ASTM C1926-23 Standard Test Method for Measurement of Glass Dissolution Rate Using Stirred Dilute Reactor Conditions on Monolithic Samples
ASTM C156-17 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
ASTM E1530-11(2016) Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
ASTM C156-11 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
ASTM D5628-96(2001)e1 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D8070-23 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
ASTM D5581-07a Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
ASTM D7229-06 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D7229-08 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D6866-16 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
ASTM F3538-22 Standard Test Method for Measuring Heat Transmission Through Flame-Resistant Materials for Clothing in Flame Exposure Using a Cylindrical Specimen Holder
ASTM E3203-19 Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
ASTM E3203-19a Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
ASTM E1618-14 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E1618-97 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E1618-01 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E1618-06e1 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM E1618-06 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM D7391-09 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
ASTM D3983-98(2011) Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
ASTM E2881-13e1 Standard Test Method for Extraction and Derivatization of Vegetable Oils and Fats from Fire Debris and Liquid Samples with Analysis by Gas Chromatography-Mass Spectrometry
ASTM E2881-18 Standard Test Method for Extraction and Derivatization of Vegetable Oils and Fats from Fire Debris and Liquid Samples with Analysis by Gas Chromatography-Mass Spectrometry
ASTM D7169-23 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM E2927-23 Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
ASTM D5934-02 Standard Test Method for Determination of Modulus of Elasticity for Rigid and Semi-Rigid Plastic Specimens by Controlled Rate of Loading Using Three-Point Bending
ASTM D6925-07 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D6925-06 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D6925-09 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D7750-23 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM A912/A912M-04 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens
ASTM D4358-84(1999) Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy
ASTM E2927-13 Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons
ASTM D4358-05 Standard Test Method for Lead and Chromium in Air Particulate Filter Samples of Lead Chromate Type Pigment Dusts by Atomic Absorption Spectroscopy
ASTM E1618-10 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
ASTM D7248/D7248M-08 Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D5887/D5887M-20 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM D5887/D5887M-22 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM D7750-12 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D6035/D6035M-13 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
ASTM D7248/D7248M-12 Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D5887/D5887M-23 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM E2143-01(2013) Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
ASTM D7248/D7248M-23 Standard Test Method for High Bearing - Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D7169-05 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
ASTM E2881-13 Standard Test Method for Extraction and Derivatization of Vegetable Oils and Fats from Fire Debris and Liquid Samples with Analysis by Gas Chromatography-Mass Spectrometry
ASTM E3203-21 Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
ASTM D5887-08 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM D5887/D5887M-22a Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM D5887/D5887M-16 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM D6502-10(2015) Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)

Korean Agency for Technology and Standards (KATS), What samples are used for method validation?

KS F 2350-2010 Method of sampling asphalt paving mixtures
KS F 2487-2005 Standard test method for preparation of asphalt mixture specimens for performance testing
KS E ISO 8541:2018 Manganese and chromium ores — Experimental methods for checking the bias of sampling and sample preparation
KS F 2486-2005 Standard test method for preparation of asphalt mixture specimens for dynamic modulus testing
KS M ISO 1686-2017(2022) Sodium and potassium silicates for industrial use — Samples and methods of test — General
KS M ISO 1686-2022 Sodium and potassium silicates for industrial use — Samples and methods of test — General
KS M ISO 12787:2014 Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques
KS M ISO 12787-2014(2019) Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques
KS F 2539-2005 Method for securing, preparing and testing specimens from hardened lightweight insulating concrete for compressive strength
KS M ISO 12787-2019 Cosmetics — Analytical methods — Validation criteria for analytical results using chromatographic techniques
KS K ISO 13437:2007 Geotextiles and geotextile-related products－Method for installing and extracting samples in soil, and testing specimens in laboratory
KS H ISO 15592-2-2013(2018) Fine-cut tobacco and smoking articles made from it－Methods of sampling, conditioning and analysis－Part 2：Atmosphere for conditioning and testing
KS H ISO TS 7821:2007 Tobacco and tobacco products－Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
KS H ISO TS 7821:2017 Tobacco and tobacco products－Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
KS H ISO TS 7821-2017(2022) Tobacco and tobacco products－Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
KS D ISO 13947:2012 Metallic powders-Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
KS D ISO 13947:2013 Metallic powders－Test method for the determination of non-metallic inclusions in metal powders using a powder-forged specimen
KS F 2448-1982 Standard test method of test for bulk specific gravity of compacted bituminous mixtures using saturated surface dry specimens
KS P ISO 14937:2012 Sterilization of health care products－General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
KS M ISO 11125-1:2002 Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 1：Sampling
KS M ISO 11125-1-2002(2017) Preparation of steel substrates before application of paints and related products－Test methods for metallic blast-cleaning abrasives－Part 1：Sampling
KS M ISO 11125-1:2021 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 1: Sampling
KS M ISO 11127-1:2012 Preparation of steel substrates before application of paints and related products-Test methods for non-metallic blast-cleaning abrasives-Part 1:Sampling
KS M ISO 11127-1-2012(2017) Preparation of steel substrates before application of paints and related products－Test methods for non-metallic blast-cleaning abrasives－Part 1：Sampling
KS M ISO 11127-1:2021 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 1: Sampling

冶金工业部, What samples are used for method validation?

YB 4016-1991 Sampling and acceptance methods for refractory products for glass melting furnaces

KE-KEBS, What samples are used for method validation?

KS 08-126 Pt.2-1978 KENYA STANDARD METHODS FOR PREPARING LABORATORY TEST SAMPLES AND TEST SPECIMENS OF TEXTILE MATERIALS FOR CHEMICAL TESTS PART 2. METHODS FOR SAMPLING COTTON FABRICS FOR CHEMICAL TESTS

Taiwan Provincial Standard of the People's Republic of China, What samples are used for method validation?

CNS 13293-1993 An Approach to the Utilization of a Supplier's Quality System in Third Party Products Certification

RU-GOST R, What samples are used for method validation?

GOST 30432-1996 Metal tubes. Selection of samples, tube stocks and specimens for mechanic and technological tests
GOST 22871-1977 Ground feldsparic and quartzfeldsparic materials. Rules of reception. Methods of sampling and sample preparation for testing
GOST R 51448-1999 Meat and meat products. Methods of test samples preparation for microbiological examination
GOST 9.703-1979 Unified system of corrosion and ageing protection. Plastic materials for items, used in tropical conditions. General requirements for selection and test methods
GOST ISO 12787-2016 Perfumery and cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
GOST 8.627-2013 State system for ensuring the traceability of measurements. In vitro diagnostics medicine test systems for measurement of quantities in biological samples. Part 1. Haematology analyzers. Verification procedure
PNST 158-2016 Conformity assessment in the field of use of nuclear energy. Methods of assessing the cost of product certification and inspection control
GOST R 55001-2012 General requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for salt spray tests
GOST R 50194-1992 Devices for automation of tank farms. Means for level measurement and sampling of oil products. General technical requirements and test methods
GOST 32795-2014 Fine-cut smoking tobacco and smoking articles made fromit. Methods of sampling, conditioning and analysis. Part 2. Atmosphere for conditioning and testing

SAE - SAE International, What samples are used for method validation?

SAE ARP9013/1A-2018 Statistical Product Acceptance Requirements Using Isolated Lot Sampling Methods
SAE ARP9013/4A-2005 Statistical Product Acceptance Requirements Using Continuous Sampling@ Skip-Lot Sampling@ or Methods for Special Cases

国家市场监督管理总局、中国国家标准化管理委员会, What samples are used for method validation?

GB/T 38787-2020 Plastics—Methods for the preparation of samples for biodegradation testing of plastic materials
GB/T 2423.7-2018 Environmental testing—Part 2：Test methods—Test Ec：Rough handling shocks，primarily for equipment—type specimens

KR-KS, What samples are used for method validation?

KS E ISO 8541-2018 Manganese and chromium ores — Experimental methods for checking the bias of sampling and sample preparation
KS M ISO 2197-2017 Sodium hydrogen carbonate for industrial use — List of methods of test and preparation of the test sample
KS H ISO TS 7821-2017 Tobacco and tobacco products－Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods
KS H ISO 15592-2-2013(2023) Fine-cut tobacco and smoking articles made from it－Methods of sampling, conditioning and analysis－Part 2：Atmosphere for conditioning and testing
KS K ISO 105-J05-2018(2023) Textiles — Tests for colour fastness — Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant(CMCCON02)
KS M ISO 11125-1-2021 Preparation of steel substrates before application of paints and related products — Test methods for metallic blast-cleaning abrasives — Part 1: Sampling
KS M ISO 11127-1-2021 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 1: Sampling

未注明发布机构, What samples are used for method validation?

AS 1289.1.1:2001(R2008) Soil testing methods for engineering purposes. Sampling and preparation of soil. Preparation of disturbed soil samples for testing.
SAE ARP9013/4A-2018 Statistical Product Acceptance Requirements Using Continuous Sampling@ Skip-Lot Sampling@ or Methods for Special Cases
AS/NZS 1301.002s:2004(R2017) Methods of test for pulp and paper - Preparation of wood samples for chemical analysis
DIN EN ISO 18592 E:2017-04 Method for destructive testing of resistance welded joints and fatigue testing of multi-point welded samples (draft)
DIN EN 12697-21 E:2018-12 Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens
DIN EN 12697-21 E:2000-02 Bituminous mixtures - Test methods for hot mix asphalt - Part 21: Indentation using plate specimens
ISO 25597:2013/Cor 1:2015 Stationary Source Emissions. Technical Corrigendum 1 for Test Method for Determination of PM and PM Mass in Stack Waste Using Cyclone Samples and Sample Concentration Dilutions
DIN 32525-4 E:2008-07 Welding consumables - Testing of welding consumables by means of weld metal specimens - Part 4: Test piece for determining the hardness of surfacing
ASTM RR-D04-1012 1996 D5581-Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
ASTM RR-D04-1014 1999 D5581-Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
DIN EN 12697-28 E:2018-12 Bituminous mixtures - Test methods for hot mix asphalt - Part 28: Preparation of samples for determining binder content, water content and grading

IN-BIS, What samples are used for method validation?

IS 9022-1979 Laboratory test samples of textile materials for chemical testing and methods of preparation of test samples
IS 3711-1966 Selection and preparation methods of samples and specimens for mechanical testing of forged steels
IS 3972 Pt.1/Sec.1-1982 Test methods for enamel products Part Ⅰ Preparation of test specimens Section 1: Enamel steel plates
IS 3972 Pt.1/Sec.2-1982 Test methods for enameled products Part 1 Preparation of test specimens Section 2: Enameled cast iron

American National Standards Institute （ANSI), What samples are used for method validation?

ANSI/ASTM F2231:2008 Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
ANSI/ASTM F2018:2000 Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ANSI/ASTM D4278:1996 Test Method for Wet Ashing Procedure for Preparing Wood Samples for Inorganic Chemical Analysis

IX-FAO, What samples are used for method validation?

CAC/GL 60-2006(Ch) Guidelines for the use of traceability/product tracing methods in food inspection and certification systems
CAC/GL 60-2006(En) Guidelines for the use of traceability/product tracing methods in food inspection and certification systems

YU-JUS, What samples are used for method validation?

JUS B.D8.243-1991 Refractories. Methods for chemical testing ofnatural graphite. Preparation of ashes as a testing sample
JUS C.K5.025-1979 Magnetic sheets. Methods of testing. Preparation of specimens for the checking ofquality and testing of magnetic properties.

IT-UNI, What samples are used for method validation?

UNI ISO 21899:2021 Biotechnology -- Biobanking -- General requirements for the validation and verification of processing methods for biological material in biobanks

Professional Standard - Tobacco, What samples are used for method validation?

YC/Z 385-2011 Tobacco and tobacco products.Preparation and constitution of identical samples from the same lot for collaborative studies for the evaluation of test methods

Society of Automotive Engineers (SAE), What samples are used for method validation?

SAE ARP9013/4-2005 Statistical Product Acceptance Requirements Using Continuous Sampline, Skip-Lot Sampling, or Methods for Special Cases

Danish Standards Foundation, What samples are used for method validation?

DS/ISO 12787:2012 Cosmetics - Analytical methods - Validation criteria for analytical results using chromatographic techniques
DS/EN ISO 105-J05:2007 Textiles - Tests for colour fastness - Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCONO2)
DS/EN ISO 9073-18:2008 Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test

海关总署, What samples are used for method validation?

SN/T 5326.1-2020 Guidelines for Validation of Professional Analytical Methods for Import and Export of Food and Cosmetics Part 1: General Guidelines

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, What samples are used for method validation?

GB/T 16865-2023 Specimens and methods for tensile testing of deformed aluminum, magnesium and their alloy processed products
GB/T 16865-2013 Test pieces and method for tensile test for wrought aluminium and magnesium alloys products
GB/T 2423.7-1995 Environmental testing for electric and electronic products. Test 2:Test methods. Test Ec and guidance:Drop and topple. Primarily for equipment-type specimens

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, What samples are used for method validation?

GB/T 35657-2017 Guideline for verification and validation of chemical analysis method and internal quality control－Metal component analysis based on sample digestion

Japanese Industrial Standards Committee (JISC), What samples are used for method validation?

JIS K 3702:2008 Test methods for Culture media -- Preparation of initial suspension and decimal dilutions

Canadian General Standards Board （CGSB), What samples are used for method validation?

CGSB 4.2 NO. 45-M88-CAN/CGSB-1988 Methodes Pour Epreuves Textiles Etoffes - Determination De L'Auto-Defroissabilite D'Un Specimen Plie Horizontalement Par Mesurage De L'Angle Remanent Apres Pliage

TH-TISI, What samples are used for method validation?

TIS 121.16-2010 Standard test methods for textiles.part 16: tensile properties of fabrics.determination of maximum force using the grab method
TIS 121.9-2009 Standard test methods for tex tiles.part 9: tensile properties of fabrics.determination of maximum force and elongation at maximum force using the strip method

Professional Standard - Public Safety Standards, What samples are used for method validation?

GA/T 931-2011 GC-MS qualitative examination method for liquefied petroleum gas and natural gas in biological samples
GA/T 933-2011 Gas chromatography and gas chromatography-mass spectrometry detection method for fluoroacetate ions in biological samples

AT-ON, What samples are used for method validation?

OENORM EN 12697-7-2021 Bituminous mixtures - Test methods - Part 7: Determination of the bulk density of bituminous specimens by gamma rays

CEN - European Committee for Standardization, What samples are used for method validation?

EN 12697-8:2018 Bituminous mixtures - Test methods - Part 8: Determination of void characteristics of bituminous specimens
PREN 12697-28-2018 Bituminous mixtures - Test methods - Part 28: Preparation of samples for determining binder content@ water content and grading
EN ISO 11125-1:2018 Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling

Aerospace, Security and Defence Industries Association of Europe (ASD), What samples are used for method validation?

ASD-STAN PREN 2004-10-1993 Aerospace Series Test Methods for Aluminium and Aluminium Alloy Products Part 10: Preparation of Micrographic Specimens for Aluminium Alloys (Edition P 1)

The American Road & Transportation Builders Association, What samples are used for method validation?

AASHTO T 312-2001 Standard Method of Test for Preparing and Determining the Density of Hot-Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compact HM-22; Part IIB
AASHTO T 275-1991 Standard Method of Tests for Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens HM-22; PART IIB R(2000)

DIN, What samples are used for method validation?

DIN EN ISO 4259-4:2022 Petroleum and related products - Precision of measurement methods and results - Part 4: Use of statistical control charts to validate 'in-statistical-control' status for the execution of a standard test method in a single laboratory (ISO 4259-4...