ZH
RU
ES

Are the instruments used a lot?

Are the instruments used a lot?, Total:499 items.

In the international standard classification, Are the instruments used a lot? involves: IT terminal and other peripheral equipment, Analytical chemistry, Electronic components in general, Protection against fire, Construction materials, Products of the textile industry, Soil quality. Pedology, Semiconductor devices, Fuels, Non-destructive testing, Measurement of fluid flow, Optics and optical measurements, Road engineering, Thermodynamics and temperature measurements, Pipeline components and pipelines, Fibre optic communications, Protective equipment, Shipbuilding and marine structures in general, Linear and angular measurements, Air quality, Nuclear energy engineering, Corrosion of metals, Industrial automation systems, Semiconducting materials, Radiation measurements, Equipment for the chemical industry, Testing of metals, Components and accessories for telecommunications equipment, Inorganic chemicals, Mechanical testing, Rubber, Paints and varnishes, Measurement of volume, mass, density, viscosity, Lubricants, industrial oils and related products, Agricultural machines, implements and equipment, Tobacco, tobacco products and related equipment, Medical equipment, Water quality, Photography, Waxes, bituminous materials and other petroleum products, Applications of information technology, Paper and board, Radiation protection, Protection of and in buildings, Surface treatment and coating, Refractories, Biology. Botany. Zoology, Furniture, Footwear, Plastics, Magnetic materials, Animal feeding stuffs, Graphic technology, Alarm and warning systems, Elements of buildings, Optical equipment, Raw materials for rubber and plastics, Reinforced plastics, Insulating materials, Occupational safety. Industrial hygiene, Tyres, Medical sciences and health care facilities in general, Aerosol containers, Wastes, Structures of buildings, Cutting tools, Test conditions and procedures in general, Textile fibres, Particle size analysis. Sieving.

American Society for Testing and Materials (ASTM), Are the instruments used a lot?

ASTM F1175-88(2011) Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison
ASTM F1175-88(1996)e1 Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison
ASTM F1175-88(2001) Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison
ASTM F1175-88(2006) Standard Practice for Using the Computer Impact Print-Out Unit as a Test Instrument for Manifold Comparison
ASTM F1708-96 Standard Practice for Evaluation of Granular Polysilicon by Meter-Zoner Spectroscopies
ASTM F1467-18 Standard Guide for Use of an X-Ray Tester (≈10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits
ASTM E2307-19 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM E2307-20 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM E2307-15be1 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM D5084-16a Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM D5084-16 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM D5084-10 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM E2056-00 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM D5647-07(2012) Standard Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus
ASTM E2056-04(2010) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM E2056-04(2016) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM D7405-08 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7405-20 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM UOP874-88 Pore Size Distribution of Porous Substances by Nitrogen Adsoprtion Using a Quantachrome Analyzer
ASTM D7405-15 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM F78-97(2002) Standard Test Method for Calibration of Helium Leak Detectors by Use of Secondary Standards
ASTM D2885-95(1999) Standard Test Method for Research and Motor Method Octane Ratings Using On-Line Analyzers
ASTM F1174-01(2006) Standard Practice for Using a Personal Computer Printer as a Test Instrument
ASTM F1174-01 Standard Practice for Using a Personal Computer Printer as a Test Instrument
ASTM D2885-21 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D6587-12 Standard Test Method for Yarn Number Using Automatic Tester
ASTM D6587-12(2018) Standard Test Method for Yarn Number Using Automatic Tester
ASTM D2885-08 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D2885-09 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
ASTM D7405-10 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7405-08a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7405-10a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM E498-95(2000) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
ASTM E498/E498M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
ASTM E498/E498M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode
ASTM E2297-04 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
ASTM D7585/D7585M-10 Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments
ASTM E2758-15a(2021) Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
ASTM E2758-15 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
ASTM E2758-10 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
ASTM E1603/E1603M-11(2017) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
ASTM F2961-14 Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
ASTM F1174-12 Standard Practice for Using a Personal Computer Printer as a Test Instrument
ASTM E2143-01(2013) Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
ASTM E408-13(2019) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
ASTM D6951/D6951M-09(2015) Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D6951-03 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D6951/D6951M-09 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
ASTM D7654/D7654M-10 Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
ASTM D6230-98(2005) Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
ASTM F1174-91(1995) Standard Practice for Using a Personal Computer Printer as a Test Instrument
ASTM D6230-21 Standard Practices for Monitoring Earth or Structural Movement Using Inclinometers
ASTM D3249-95(2011) Standard Practice for General Ambient Air Analyzer Procedures
ASTM D6230-21e1 Standard Practices for Monitoring Earth or Structural Movement Using Inclinometers
ASTM G73-10 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
ASTM D7512-09(2015) Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
ASTM D7825-12 Standard Guide for Generating a Process Stream Property Value through the Application of a Process Stream Analyzer
ASTM F1527-00 Standard Guide for Application of Silicon Standard Reference Materials and Reference Wafers for Calibration and Control of Instruments for Measuring Resistivity of Silicon
ASTM C1749-17 Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
ASTM E2852-13(2021) Standard Guide for Acquisition, Maintenance, Storage, and Use of Hazardous Material Detection Instrumentation
ASTM C1749-17a Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
ASTM E2056-04 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
ASTM D1424-09(2013)e1 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
ASTM E1817-96 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)
ASTM E499-95(2000) Standard Test Methods for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ASTM E499/E499M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode
ASTM E2852-13 Standard Guide for Acquisition, Maintenance, Storage, and Use of Hazardous Material Detection Instrumentation
ASTM E2583-07(2015) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
ASTM E4-08 Standard Practices for Force Verification of Testing Machines
ASTM E4-09 Standard Practices for Force Verification of Testing Machines
ASTM E4-09a Standard Practices for Force Verification of Testing Machines
ASTM D3464-96(2014) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D5099-08 Standard Test Methods for Rubberx2014;Measurement of Processing Properties Using Capillary Rheometry
ASTM E2143-01(2021) Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons
ASTM D4541-09 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D7271-06(2020) Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM D8184-18 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D8184-18e1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument
ASTM D5485-16 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
ASTM C796/C796M-12 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
ASTM D7404-07 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM D7404-07(2012) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM E493/E493M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM E2058-13a Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM E991-11 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
ASTM D7404-07(2016) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
ASTM E493/E493M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode
ASTM D5099-08(2017) Standard Test Methods for Rubber&x2014;Measurement of Processing Properties Using Capillary Rheometry
ASTM E1696-15(2022) Standard Test Method for Field Measurement of Raised Retroreflective Pavement Markers Using a Portable Retroreflectometer
ASTM D5093-90(1997) Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
ASTM D5093-15e1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM D5093-15 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM F1992-99 Standard Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes
ASTM F1992-99(2007) Standard Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes
ASTM E317-21 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments
ASTM E2246-11(2018) Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2245-11(2018) Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E1345-98(2014) Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM D528-97(2007) Standard Test Method for Machine Direction of Paper and Paperboard
ASTM D5289-95(2001) Standard Test Method for Rubber Property8212;Vulcanization Using Rotorless Cure Meters
ASTM D5289-19 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM D5289-95 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM E303-93(2018) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM F1930-18 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM D5289-19a Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters
ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E3367-23 Standard Test Method for Determining the Combustion Behavior of Layered Assemblies using a Cone Calorimeter
ASTM E2540-16(2022) Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
ASTM E1709-16(2022) Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
ASTM C1429-99(2004) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
ASTM C1428-18(2023) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single–Standard Gas Source Multiple Collector Mass Spectrometer Method
ASTM C1429-21 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
ASTM E1893-08a Standard Guide for Selection and Use of Portable Radiological Survey Instruments for Performing In Situ Radiological Assessments to Support Unrestricted Release from Further Regulatory Controls
ASTM D5454-93(1999) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D5454-04 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM E2244-05 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2244-11 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM E2244-11(2018) Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
ASTM F1930-17 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM D5454-11(2020) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM F1930-13 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM D4060-10 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D8470-22 Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems
ASTM E1603/E1603M-11(2022) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode
ASTM C16-03(2008) Standard Test Method for Load Testing Refractory Shapes at High Temperatures
ASTM E1469-92(1997) Standard Practice for Collecting Benthic Macroinvertebrates with Multiple-Plate Samplers
ASTM C1699-09(2023) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM C1699-08 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM F1858-98(2020) Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use
ASTM F1858-98(2014) Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use
ASTM E317-94 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse- Echo Examination Instruments and Systems Without the Use of Electronic Measurement Instruments
ASTM D7690-11 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography
ASTM C1428-99 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method
ASTM C1429-99(2009) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
ASTM C1429-99(2014) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
ASTM D3999-91(1996) Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
ASTM E303-93(1998) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM F1677-96 Standard Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST)
ASTM D5277-92(2002) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
ASTM F3493-23 Standard Practice for Measuring Dynamic Characteristics of Water Slide Systems Using Instrumented Humans
ASTM D1052-09(2019) Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus
ASTM D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM A1036-04(2015) Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
ASTM E1458-92 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM D7271-06 Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM F3276-19 Standard Guide for Using a Force Tester to Evaluate the Performance of a Brush Part Designed to Clean the External Surface of a Medical Device
ASTM F3276-22 Standard Guide for Using a Force Tester to Evaluate the Performance of a Brush Part Designed to Clean the External Surface of a Medical Device
ASTM E2297-15 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
ASTM E128-99(2005) Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
ASTM E128-99(2019) Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use
ASTM C1428-11 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method
ASTM D3675-14 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM D6306-10 Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
ASTM C1784-20 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products
ASTM F1442-92(2009) Standard Practice for Using a Copier or Printer as a Test Instrument for Evaluating Paper Performance
ASTM D3284-05(2019) Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters
ASTM D2396-20 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM F3275-19 Standard Guide for Using a Force Tester to Evaluate Performance of a Brush Part Designed to Clean the Internal Channel of a Medical Device
ASTM F3275-22 Standard Guide for Using a Force Tester to Evaluate Performance of a Brush Part Designed to Clean the Internal Channel of a Medical Device
ASTM C627-18 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
ASTM D4944-11 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
ASTM C627-10e1 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
ASTM D7971-20 Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer
ASTM D4541-22 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D7175-05 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM E2133-03(2020) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface
ASTM D7175-07 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-05e1 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM A1036-04(2020) Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers
ASTM C490-07 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-09 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-10 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490/C490M-17 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM E1710-05 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM E1710-11 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM E1345-98(2008)e1 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
ASTM D7686-11 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
ASTM F1839-08e2 Standard Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopedic Devices and Instruments
ASTM E1791-96(2021) Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry
ASTM E1791-96(2014) Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry
ASTM D7027-20 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
ASTM B855-17 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel
ASTM C1429-99 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer
ASTM D7941/D7941M-23 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
ASTM D6204-12 Standard Test Method for Rubbermdash;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM F1930-23 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM D8239-21 Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test
ASTM D8239-18 Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test
ASTM D5467/D5467M-97(2004) Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
ASTM D5467/D5467M-97(2010) Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
ASTM D5467/D5467M-97 Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
ASTM D8239-21a Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test
ASTM D8239-23 Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test
ASTM D5858-96(2003) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
ASTM D5288-97(2004) Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM D3675-16 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
ASTM D5858-96(2008) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
ASTM D6648-01 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D5185-13 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry lpar;ICP-AESrpar;
ASTM D5142-90(1998) Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM E2551-07 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM E2551-13 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
ASTM D7238-06(2017) Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM D7238-20 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM F1702-10 Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus
ASTM D7686-23 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
ASTM D6132-13(2022) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ASTM C627-93(1999) Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
ASTM D6277-01 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D6277-99 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM C490-04 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C490-00a Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM D5142-02a Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02ae1 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-02 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D6277-01(2006) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D7454-08 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM E2058-13 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
ASTM D5454-11 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM D5454-11e1 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
ASTM C490/C490M-11 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM G183-15(2023) Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
ASTM D8446-22 Standard Test Method for Water Vapor Content in Compressed Air Using Electronic Moisture Analyzers
ASTM C1057-17 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
ASTM D7271-06(2012) Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM D7760-12 Standard Test Method for Measurement of Hydraulic Conductivity of Tire Derived Aggregates Using a Rigid Wall Permeameter
ASTM C1344-97(2013) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method
ASTM C490/C490M-11e1 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM D6277-07(2017) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
ASTM D7941/D7941M-14 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer
ASTM D7454-14e1 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
ASTM D6060-96(2009) Standard Practice for Sampling of Process Vents With a Portable Gas Chromatograph
ASTM D5288-10 Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
ASTM E1354-09 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-02 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-99 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-23 Red Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter (Standard + Redline PDF Bundle)
ASTM E1354-08 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-08a Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-10 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-02d Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-17 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1354-15 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM C1428-99(2005) Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method
ASTM A773/A773M-01 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM A773/A773M-96 Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM A773/A773M-21 Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
ASTM E2439-09 Standard Guide for Instrumentation, Sensors and Operating Software Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
ASTM D7127-13 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
ASTM D7552-09 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
ASTM A773/A773M-14 Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs
ASTM D7418-12 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
ASTM A977/A977M-07 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM E707-90(1996) Standard Test Method for Skid Resistance Measurements Using the North Carolina State University Variable-Speed Friction Tester
ASTM D5142-04 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM D5142-09 Standard Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM E2872-14(2019) Standard Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus
ASTM E2297-23 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
ASTM E1817-08(2014) Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators 40;RQIs41;
ASTM F1930-12 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
ASTM D7380-15 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
ASTM A977/A977M-07(2013) Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM D5185-13e1 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry 40;ICP-AES41;
ASTM A773/A773M-01(2009) Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
ASTM D7234-19 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM E2307-15b Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
ASTM D7235-10 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
ASTM D6466-10 Standard Test Method for Diameter of Wool and Other Animal Fibers By Sirolan-Laserscan Fiber Diameter Analyser
ASTM A977-97 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
ASTM E594-96(2001) Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography
ASTM D5031-01(2006) Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
ASTM D5031-96 Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
ASTM D5031-01 Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings
ASTM D6601-12 Standard Test Method for Rubber Propertiesmdash;Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer
ASTM E1458-12(2022) Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
ASTM D7552-22 Standard Test Method for Determining the Complex Shear Modulus (G*) of Asphalt Mixtures Using Dynamic Shear Rheometer
ASTM D5001-10(2014) Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
ASTM E3338-22 Standard Guide for Size and Shape of Solid Particles, Liquid Droplets, and Gas Bubbles, Dynamically Conveyed, Using a Dynamic Imaging Analyzer

British Standards Institution (BSI), Are the instruments used a lot?

BS ISO 17313:2004 Soil quality - Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter
BS ISO 15769:2010 Hydrometry - Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods
BS EN 61290-10-4:2007 Optical amplifiers - Test methods - Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
BS EN 50288-7:2005 Multi-element metallic cables used in analogue and digital communication and control - Part 7:Sectional specification for instrumentation and control cables
BS EN 61290-10-1:2003 Optical amplifiers - Test methods - Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
BS EN ISO 21253-2:2019 Water quality. Multi-compound class methods - Criteria for the quantitative determination of organic substances using a multi-compound class analytical method
BS EN 29048:1991 Building construction. Jointing products. Determination of extrudability of sealants using standardized apparatus
BS EN ISO 8394-2:2017 Buildings and civil engineering works. Determination of extrudability for sealant. Using standardized apparatus
BS EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1:Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
BS EN 16167:2012 Sludge, treated biowaste and soil. Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
BS EN ISO 10360-5:2020 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring systems (CMS) - Coordinate measuring machines (CMMs) using single and multiple stylus contacting probing systems using discrete point and/or…

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Are the instruments used a lot?

ASHRAE OR-05-8-6-2005 Feasibility Study of Using Various Instruments for Measurement of Air Motion in a Test Room
ASHRAE 41.9-2011 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters
ASHRAE 41.9 ERTA-2017 Standard Methods for Volatile-Refrigerant Mass Flow Measurements Using Calorimeters

German Institute for Standardization, Are the instruments used a lot?

DIN 16257:1987-03 Nominal positions and position symbols used for measuring instruments
DIN ISO 2971:2004 Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus (ISO 2971:1998)
DIN EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008
DIN EN 61290-10-2:2008-07 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007); German version EN 61290-10-2:2008 / Note: DIN EN 61290-10-2 (2004-02) remains valid alongside this stan...
DIN EN 61290-10-4:2008-02 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007); German version EN 61290-10-4:2007 / Note: Applies in conjunction with DIN EN 61291...
DIN EN 61290-10-1:2010-01 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2009); German version EN 61290-10-1:2009 / Note: DIN EN 61290-10-1 (2004-02) remains valid along...
DIN EN 50288-7:2006 Multi-element metallic cables used in analogue and digital communication and control - Part 7: Sectional specification for instrumentation and control cables; German version EN 50288-7:2005
DIN EN ISO 21253-2:2022-12 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019); German version EN ISO 21253-2:2019
DIN EN 13949:2003 Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking; German version EN 13949:2003
DIN EN ISO 8394-2:2018-03 Buildings and civil engineering works - Determination of extrudability for sealant - Part 2: Using standardized apparatus (ISO 8394-2:2017); German version EN ISO 8394-2:2017
DIN EN ISO 21253-2:2018 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO/DIS 21253-2:2018); German and English version prEN ISO 21253-2:2018

CZ-CSN, Are the instruments used a lot?

CSN ISO 5436:1994 Calibration specimens.Stylus instruments.Types,calibration and use of specimens
CSN 85 6201 Za-1989

Danish Standards Foundation, Are the instruments used a lot?

DS/ISO 17312:2005 Soil quality - Determination of hydraulic conductivity of saturated porous materials using a rigid wall permeameter
DS/ISO 17313:2004 Soil quality - Determination of hydraulic conductivity of saturated porous materials using a flexible wall permeameter
DS/EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
DS/EN 61290-10-4:2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer
DS/EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer

The American Road & Transportation Builders Association, Are the instruments used a lot?

AASHTO TP 70-2011 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO TP 70-2013 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 350-2014 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO R 40-2010 Standard Practice for Measuring Pavement Profile Using a Rod and Level
AASHTO TP 70-2010 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) Revision 1
AASHTO T 278-1990(R2007) Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
AASHTO T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO T 245-2015 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
AASHTO M 210-2010 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210-2011 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210-2012 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 210M/M 210-2014 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO M 332-2014 Standard Specification for Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test
AASHTO M 332-2021 Standard Specification for Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test
AASHTO TP58-1999 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus 2000 Edition
AASHTO R 70-2016 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
AASHTO T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO T 340-2010 Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
AASHTO MP 19-2010 Standard Specification for Performance-Graded Asphalt Binder Using Multiple Stress Creep CPecovery (MSCR) Test Revision 1
AASHTO TP 89-2010 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO TP 89-2013 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester

AASHTO - American Association of State Highway and Transportation Officials, Are the instruments used a lot?

T 350-2014 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2009 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2011 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2012 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2013 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 70-2007 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
R 40-2010 Standard Practice for Measuring Pavement Profile Using a Rod and Level
PP31-1996 Standard Practice for Measuring Pavement Profile Using a Rod and Level
PP 31-2004 Standard Practice for Measuring Pavement Profile Using a Rod and Level
R 40-2005 Standard Practice for Measuring Pavement Profile Using a Rod and Level
T 278-1990 Standard Method of Test for Surface Frictional Properties Using the British Pendulum Tester
TP 70-2010 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Revision 1)
TP48-1994 Standard Test Method for Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus (Edition 1A)
T 245-1997 Standard Method of Test for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus
T 245-2014 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
T 245-2013 Standard Method of Test for Resistance to Plastic Flow of Asphalt Mixtures Using Marshall Apparatus
M 210-2009 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210M/M 210-2014 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2010 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2006 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2011 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 210-2012 Standard Specification for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
M 332-2014 Standard Specification for Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test
R 70M/R 70-2018 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
R 70-2016 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste@ Mortar@ and Concrete
TP5-1998 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2004 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2006 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1997 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2012 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2009 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2005 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP 63-2009 Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
T 340-2010 Standard Method of Test for Determining Rutting Susceptibility of Hot Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
TP 63-2007 Standard Method of Test for Determining Rutting Susceptibility of Hot-Mix Asphalt (HMA) Using the Asphalt Pavement Analyzer (APA)
T 313-2009 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2004 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP 125-2016 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2003 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2008 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1998 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1997 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2006 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2005 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2012 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
MP 19-2010 Standard Specification for Performance-Graded Asphalt Binder Using Multiple Stress Creep CPecovery (MSCR) Test (Revision 1)
R 92-2018 Standard Practice for Evaluating the Elastic Behavior of Asphalt Binders Using the Multiple Stress Creep Recovery (MSCR) Test
TP 89-2013 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
TP 89-2010 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester

IN-BIS, Are the instruments used a lot?

Institute of Electrical and Electronics Engineers (IEEE), Are the instruments used a lot?

SMPTE ST 297-2:2017 ST 297-2:2017 - SMPTE Standard - Multi-Link and Multi-Channel 1.5G, 3G, 6G and 12G-SDI Using CWDM
ST 297-2:2017 ST 297-2:2017 - SMPTE Standard - Multi-Link and Multi-Channel 1.5G, 3G, 6G and 12G-SDI Using CWDM
IEEE/ANSI N42.17A-1989 American National Standard Performance Specifications for Health Physics Instrumentation - Portable Instrumentation for Use in Normal Environmental Conditions
IEEE Std 1214-1992 IEEE Standard Multichannel Analyzer (MCA) Histogram Data Interchange Format for Nuclear Spectroscopy
IEEE 1609.4-2006 Trial-Use Standard for Wireless Access in Vehicular Environments (WAVE)Multi-channel Operation
ANSI Std N42.17C-1989 American National Standard Performance Specifications for Health Physics Instrumentation. Portable Instrumentation for Use in Extreme Environmental Conditions
IEEE/ANSI N42.17A-2003 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Instrumentation for Use in Normal Environmental Conditions
IEEE Std 488.2-1992 IEEE Standard Codes, Formats, Protocols, and Common Commands for Use With IEEE Std 488.1-1987, IEEE Standard Digital Interface for Programmable Instrumentation
ANSI N42.17AC-2022 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Survey Instrumentation for Use in Normal and Extreme Environmental Conditions
IEEE/ANSI N42.17AC-2022 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Survey Instrumentation for Use in Normal and Extreme Environmental Conditions
ANSI/IEEE Std 488.2-1987 IEEE Standard Codes, Formats, Protocols, and Common Commands For Use with ANSI/IEEE Std 488.1-1987 IEEE Standard Digital Interface for Programmable Instrumentation
IEEE 488.2-1987 IEEE Standard Codes, Formats, Protocols, and Common Commands For Use with ANSI/IEEE Std 488.1-1987 IEEE Standard Digital Interface for Programmable Instrumentation
ST 194:2002 ST 194:2002 - SMPTE Standard - Motion-Picture Film (35-mm) — Projector Usage — Release Prints Having Four Perforations per Frame
ANSI Std N42.14-1991 American National Standard Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of Radionuclides

American National Standards Institute （ANSI), Are the instruments used a lot?

ANSI/ASTM E2307:2010 Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-Story Test Apparatus

Professional Standard - Traffic, Are the instruments used a lot?

JT/T 680.7-2007 Technical requirement for the installation,operation,maintenance and repair of marine navigation equipment Part 7: Doppler log

International Electrotechnical Commission (IEC), Are the instruments used a lot?

IEC 62089:2001 Nuclear instrumentation - Calibration and usage of alpha/beta gas proportional counters
IEC TR 62971:2015 Radiation instrumentation - Radiation sources used in illicit trafficking detection standards - Guidance and recommendations
IEC 61290-10-2:2007 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
IEC 61290-10-1:2003 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters; Pulse method using an optical switch and optical spectrum analyzer
IEC 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer

(U.S.) Ford Automotive Standards, Are the instruments used a lot?

FORD ESB-M1H349-A2-2003 FABRIC, SHERIDAN PATTERN (POLYKNIT) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M15P45-B-2009 ASSEMBLY PERFORMANCE, INSTRUMENT PANEL AND SOFT INTERIOR COMPONENTS, FLEXIBLE COVER SKIN MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2P184-A-2009 PERFORMANCE, INTERIOR APPLIQUES, INSTRUMENT CLUSTER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M1H349-A2-2009 FABRIC, SHERIDAN PATTERN (POLYKNIT) ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2F190-A-2003 FABRIC, VINYL COATED (PVC), EXPANDED, MULTI- PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M15P45-A-2009 PERFORMANCE, INSTRUMENT PANEL ASSEMBLY, FLEXIBLE COVER SKIN MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H527-C-2005 FABRIC, STOCKTON KG PATTERN, DOBBY WOVEN ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H874-B-2004 FABRIC, CAPTAIN II PATTERN, DOBBY WOVEN ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H1034-A-2009 FABRIC, MINUTE PATTERN, WOVEN DOBBY, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M1H640-A-2003 BODYCLOTH, MURPHY PATTERN, POLYKNIT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H1095-A-2006 FABRIC, CORDOBA PATTERN, WOVEN JACQUARD ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H756-A-2003 FABRIC, TWILL PATTERN, DOBBY WOVEN ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M1L77-A-2003 CABLE, LOW TENSION - VINYL INSULATED - STRANDED, FLEXIBLE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M1C221-A-2004 GREASE, MULTIPLE FLUID BASED - ORGANIC THICKENER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H942-A-2004 FABRIC, WIRE PATTERN, WOVEN DOBBY, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H970-A-2004 FABRIC, DITTO PATTERN, DOBBY WOVEN, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H1049-A-2007 FABRIC, EXCELSIOR, DOBBY WOVEN, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H1098-A-2006 FABRIC, MENDOZA CHARCOAL BLACK PATTERN, WOVEN JACQUARD***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H884-A-2003 FABRIC, MONDUS PATTERN, WOVEN DOBBY, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H881-A-2008 FABRIC, CODE PATTERN, WOVEN DOBBY, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H885-A-2008 FABRIC, MODERN PATTERN, WOVEN DOBBY, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H908-A-2008 FABRIC, SMOOTH PATTERN, WOVEN DOBBY, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H924-A-2008 FABRIC, MODA PATTERN, WOVEN DOBBY, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M1H640-A-2009 BODYCLOTH, MURPHY PATTERN, POLYKNIT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H1038-A-2009 FABRIC, MONDUS MAX ASEAN, WOVEN DOBBY, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H913-A-2009 FABRIC, LUX PATTERN, WOVEN DOBBY, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H1027-A-2006 FABRIC, ARGYLE PATTERN, WARP KNIT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M2F177-A-2003 FABRIC, VINYL COATED, MULTI-PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A*** REPLACES ESB-M2F127-A,B,C,D
FORD WSS-M1H1039-A-2009 FABRIC, AMBASSADOR DOORPANEL, DOBBY WOVEN, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSD-M2F178-A-2003 FABRIC, VINYL COATED, MULTI-PURPOSE, POLYURETHANE FOAM LAMINATE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M5B409-A1-2002 CLEANER, BODY SHEET METAL, MULTI-COMPONENT, BUILDER, POWDER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESF-M1L119-A-2003 CABLE, LOW TENSION - VINYL INSULATED (105 °C) - TINNED MULTIPLE CONDUCTOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H951-A-2005 FABRIC, LOZENGE PATTERN, DOBBY WOVEN, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H853-A-2003 FABRIC, MARTUR TWILL PATTERN, DOBBY WOVEN, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H969-A-2008 FABRIC, CUBOID PATTERN, DOBBY WOVEN, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M1H808-A-2008 FABRIC, DOMINO PATTERN, WOVEN JACQUARD, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M5B409-A3-2002 CLEANER, BODY SHEET METAL, MULTI-COMPONENT, BUILDER, LIQUID ***TO BE USED WITH FORD WSS-M99P1111-A***

Association Francaise de Normalisation, Are the instruments used a lot?

NF X45-101:1996 Liquids filtration. Porous membranes. Permeability test using a reference water.
NF EN 61290-10-2:2008 Amplificateurs optiques - Méthodes d'essai - Partie 10-2 : paramètres à canaux multiples - Méthode d'impulsion utilisant un analyseur de spectre optique stroboscopique
NF EN 61290-10-4:2007 Amplificateurs optiques - Méthodes d'essai - Partie 10-4 : paramètres à canaux multiples - Méthode par soustraction de source interpolée en utilisant un analyseur de spectre optique
NF C93-805-10-2:2003 Optical amplifiers - Test methods - Part 10-2 : multichannel parameters - Pulse method using a gated optical spectrum analyzer.
NF C93-805-10-2*NF EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2 : multichannel parameters - Pulse method using a gated optical spectrum analyzer
NF ISO 2971:2013 Cigarettes et bâtonnets-filtres - Détermination du diamètre nominal - Méthode utilisant un instrument de mesure optique sans contact
NF EN 61290-10-1:2009 Amplificateurs optiques - Méthodes d'essai - Partie 10-1 : paramètres à canaux multiples - Méthode d'impulsion utilisant un interrupteur optique et un analyseur de spectre optique
NF C93-542-7*NF EN 50288-7:2006 Multi-element metallic cables used in analogue and digital communication and control - Part 7 : sectional specification for instrumentation and control cables
NF T90-253-2*NF EN ISO 21253-2:2019 Water quality - Multi-compound class methods - Part 2 : criteria for the quantitative determination of organic substances using a multi-compound class analytical method
NF S76-061*NF EN 13949:2003 Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking

TH-TISI, Are the instruments used a lot?

TIS 1294-1995 Standard test method for flash point of cutback asphalt with tag open-cup

International Organization for Standardization (ISO), Are the instruments used a lot?

ISO/ASTM 51631:2002 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
ISO/ASTM 51631:2003 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimeter calibrations
ISO/ASTM 51631:2013 Practice for use of calorimetric dosimetry systems for electron beam dose measurements and dosimetery system calibrations

CENELEC - European Committee for Electrotechnical Standardization, Are the instruments used a lot?

EN 61290-10-2:2003 Optical amplifiers - Test methods Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
EN 61290-10-1:2003 Optical amplifiers Test methods Part 10-1: Multichannel parameters Pulse method using an optical switch and optical spectrum analyzer

ISA - International Society of Automation, Are the instruments used a lot?

ISA 67.02.01-2014 Nuclear Safety-Related Instrument-Sensing Line Piping and Tubing Standard for Use in Nuclear Power Plants
ISA S67.02.01-1996 Nuclear Safety-Related Instrument Sensing Line Piping and Tubing Standard for Use in Nuclear Power Plants

Korean Agency for Technology and Standards (KATS), Are the instruments used a lot?

KS F 2393-2019 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS F 2393-2014 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS C IEC 61290-10-2:2005 Optical amplifiers－Test methods－Part 10－2：Multichannel parameters－Pulse method using a gated optical spectrum analyzer
KS F 2390-2019 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS F 2390-2014 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS C IEC 61290-10-1:2005 Optical amplifiers－Test methods－Part 10－1：Multichannel parameters－Pulse method using an optical switch and optical spectrum analyzer

ES-UNE, Are the instruments used a lot?

UNE-EN 61290-10-2:2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (Endorsed by AENOR in May of 2008.)
UNE-EN 61290-10-1:2009 Optical amplifiers - Test methods -- Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (Endorsed by AENOR in July of 2009.)
UNE-EN ISO 21253-2:2020 Water quality - Multi-compound class methods - Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method (ISO 21253-2:2019)
UNE-EN 61290-10-4:2007 Optical amplifiers - Test methods -- Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007). (Endorsed by AENOR in November of 2007.)

US-CFR-file, Are the instruments used a lot?

CFR 33-149.404-2013 Navigation and navigable waters. Part149:Deepwater ports: design, construction, and equipment. Section149.404:Can I use firefighting equipment that has no Coast Guard standards?

RO-ASRO, Are the instruments used a lot?

SR CEI 839-2-4-1996 Alarm systems. Part 2: Requirements for intruder alarm systems. Section 4-Ultrasonic Doppler detectors for use in buildings
SR CEI 839-2-5-1996 Alarm systems. Part 2: Requirements for intruder alarm systems. Section 5-Microwave Doppler detectors for use in buildings

European Committee for Electrotechnical Standardization（CENELEC）, Are the instruments used a lot?

EN 61290-10-1:2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer
EN 50288-7:2005 Multi-element metallic cables used in analogue and digital communication and control Part 7: Sectional specification for instrumentation and control cables
HD 241 S2-1981 Identification of Apparatus Terminals and General Rules for a Uniform System of Terminal Marking, Using an Alpha-Numeric Notation

Japanese Industrial Standards Committee (JISC), Are the instruments used a lot?

JIS C 6122-10-2:2010 Optical amplifiers -- Test methods -- Part 10-2: Multichannel parameters -- Pulse method using a gated optical spectrum analyzer

RTCA - RTCA@ Inc., Are the instruments used a lot?

RTCA DO-187-1984 Minimum Operational Performance Standards for Airborne Area Navigation Equipment Using Multi-Sensor Inputs

Lithuanian Standards Office , Are the instruments used a lot?

LST EN 15742-2009 Animal feeding stuffs - Determination of OC-pesticides and PCB?s by GC/ECD
LST EN 61290-10-2-2008 Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer (IEC 61290-10-2:2007)
LST EN 61290-10-4-2007 Optical amplifiers - Test methods - Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC 61290-10-4:2007)
LST EN 61290-10-1-2009 Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer (IEC 61290-10-1:2009)

IETF - Internet Engineering Task Force, Are the instruments used a lot?

RFC 7968-2016 Transparent Interconnection of Lots of Links (TRILL): Using Data Labels for Tree Selection for Multi-Destination Data

KE-KEBS, Are the instruments used a lot?

KS 09-714 Pt.7-1985 KENYA STANDARD SPECIFICATION FOR DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES PART 7, SPECIAL REQUIREMENTS FOR MULTI-FUNCTION INSTRUMENTS

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Are the instruments used a lot?

IEEE 488.2 ERTA-2004 Standard Codes@ Formats@ Protocols@ and Common Commands For Use with IEEE Std 488.1-1987@ IEEE Standard Digital Interface for Programmable Instrumentation

Association of German Mechanical Engineers, Are the instruments used a lot?

VDI/VDE 3528 Blatt 1-2011 Requirements of repetition parts and criteria for their use in the instrumentation and control to safety in nuclear power plants - General part

RU-GOST R, Are the instruments used a lot?

GOST 32331-2013 Lubricating Grease. Determination of penetration with a penetrometer with a cone by one-quarter and one-half of the scale

International Telecommunication Union (ITU), Are the instruments used a lot?

ITU-T Y.1415 AMD 1-2007 Ethernet-MPLS network interworking User plane interworking Amendment 1: New Appendix II Use of Ethernet-MPLS interworking for transport of IP/MPLS services Study Group 13

European Committee for Standardization (CEN), Are the instruments used a lot?

EN 13949:2003 Respiratory equipment - Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen - Requirements, testing, marking
EN 16167:2012 Sludge, treated biowaste and soil - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
EN 16167:2018 Soil@ treated biowaste and sludge - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GCECD)

National Fire Protection Association (NFPA), Are the instruments used a lot?

NFPA 1408-2015 Standard for Training Fire Service Personnel in the Operation, Care, Use, and Maintenance of Thermal Imagers (Effective Date: 12/1/2014)

Standard Association of Australia （SAA）, Are the instruments used a lot?

AS 4515:2006 Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature

GOSTR, Are the instruments used a lot?

GOST R 58400.6-2019 Automobile roads of general use. Petroleum-based bitumen binders. Method of determining the properties of recovery via impacts of multiple shear stress (MSCR) using dynamic shear rheometer (DSR)