ZH
RU
ES

The characteristics of photoelectric devices

The characteristics of photoelectric devices, Total:496 items.

In the international standard classification, The characteristics of photoelectric devices involves: Solar energy engineering, Galvanic cells and batteries, Optoelectronics. Laser equipment, Semiconductor devices, Road vehicle systems, Fibre optic communications, Aids for disabled or handicapped persons, Interface and interconnection equipment, Postal services, Internal combustion engines for road vehicles, Protection against fire, Optical equipment, Road engineering, Electronic tubes, Electronic display devices, Products of the textile industry, Telecommunication systems, Acoustics and acoustic measurements, Fasteners for aerospace construction, Characteristics and design of machines, apparatus, equipment, Integrated circuits. Microelectronics, Valves, Industrial automation systems, Burners. Boilers, Electrical wires and cables, Photography, Rectifiers. Convertors. Stabilized power supply, Medical equipment, Electrical accessories, Piezoelectric and dielectric devices, Radiocommunications, Hand-held tools, Domestic electrical appliances in general, Insulating materials, Railway rolling stock, Safety of machinery, Components for electrical equipment, Aerospace electric equipment and systems, Conducting materials, Telecommunications in general, Electricity. Magnetism. Electrical and magnetic measurements, Applications of information technology, Non-destructive testing, Fluid power systems, Electric filters, Electromagnetic compatibility (EMC), Quality, Electronic components in general, Fruits. Vegetables, Structures of buildings, Agricultural machines, implements and equipment, TELECOMMUNICATIONS. AUDIO AND VIDEO ENGINEERING, Kitchen equipment, Body care equipment, On-board equipment and instruments, Farm buildings, structures and installations, Electrical equipment for working in special conditions, Switchgear and controlgear, Installations in buildings, Physics. Chemistry, Lamps and related equipment.


British Standards Institution (BSI), The characteristics of photoelectric devices

  • BS EN 60904-1:2006 Photovoltaic devices - Measurement of photovoltaic current-voltage characteristics
  • BS EN IEC 60904-1:2020 Photovoltaic devices. Measurement of photovoltaic current-voltage characteristics
  • BS EN 60904-1-1:2017 Photovoltaic devices - Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices
  • BS EN IEC 60904-9:2020 Photovoltaic devices. Classification of solar simulator characteristics
  • PD IEC TS 60904-1-2:2019 Photovoltaic devices. Measurement of current-voltage characteristics of bifacial photovoltaic (PV) devices
  • BS EN 62007-1:2000 Semiconductor optoelectronic devices for fibre optic system applications - Essential ratings and characteristics
  • 19/30355682 DC BS EN 60904-1. Photovoltaic devices. Part 1. Measurement of photovoltaic current-voltage characteristics
  • BS IEC 62977-2-2:2020 Electronic displays - Measurements of optical characteristics. Ambient performance
  • BS IEC 62977-3-7:2022 Electronic displays - Evaluation of optical performance. Tone characteristics
  • BS EN 62007-1:2009 Semiconductor optoelectronic devices for fibre optic system applications - Specification template for essential ratings and characteristics
  • BS EN 62007-1:2015 Semiconductor optoelectronic devices for fibre optic system applications. Specification template for essential ratings and characteristics
  • BS EN 60747-5-2:1998 Discrete semiconductor devices and integrated circuits. Optoelectronic devices. Essential ratings and characteristics
  • BS EN 60747-5-2:2001 Discrete semiconductor devices and integrated circuits - Optoelectronic devices - Essential ratings and characteristics
  • BS IEC 62977-2-1:2021 Electronic displays. Measurements of optical characteristics. Fundamental measurements
  • BS IEC 62047-35:2019 Semiconductor devices. Micro-electromechanical devices - Test method of electrical characteristics under bending deformation for flexible electromechanical devices
  • BS EN 62149-4:2010 Fibre optic active components and devices - Performance standards - 1300 nm fibre optic transceivers for Gigabit Ethernet application
  • 19/30355646 DC BS EN 60904-9. Photovoltaic devices. Part 9. Classification of solar simulator characteristics
  • PD IEC TR 62977-2-5:2018 Electronic display devices. Transparent displays. Measurements of optical characteristics
  • BS EN IEC 62007-1:2015+A1:2022 Semiconductor optoelectronic devices for fibre optic system applications - Specification template for essential ratings and characteristics
  • BS IEC 62047-30:2017 Semiconductor devices. Micro-electromechanical devices - Measurement methods of electro-mechanical conversion characteristics of MEMS piezoelectric thin film
  • BS IEC 62047-42:2022 Semiconductor devices. Micro-electromechanical devices - Measurement methods of electro-mechanical conversion characteristics of piezoelectric MEMS cantilever
  • BS EN 62149-4:2003 Fibre optic active components and devices - Performance standards - 1300 nm fibre optic transceivers for Gigabit Ethernet application
  • BS EN 61300-3-29:2014 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Spectral transfer characteristics of DWDM devices
  • BS EN 62109-2:2011 Safety of power converters for use in photovoltaic power systems. Particular requirements for inverters
  • 22/30437195 DC BS IEC 62047-43. Semiconductor devices. Micro-electromechanical devices - Part 43. Test method of electrical characteristics after cyclic bending deformation for flexible electro-mechanical devices
  • BS EN IEC 62109-3:2020 Safety of power converters for use in photovoltaic power systems - Part 3: Particular requirements for electronic devices in combination with photovoltaic elements
  • BS 7933-1:1998 Electric cables - Accessories - Material characterization - Resinous compounds before cure and in the cured state
  • BS 7933-1:2008 Electric cables. Accessories. Material characterisation. Fingerprinting and type tests for resinous compounds
  • BS EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
  • BS EN IEC 62024-1:2018 High frequency inductive components. Electrical characteristics and measuring methods. Nanohenry range chip inductor
  • 18/30370950 DC BS EN 62977-2-2. Electronic displays. Part 2-2. Measurements of optical characteristics. Ambient performance
  • BS EN IEC 62024-2:2020 High frequency inductive components. Electrical characteristics and measuring methods. Rated current of inductors for DC-to-DC converters
  • BS ISO 10330:2002 Photography - Synchronizers, ignition circuits and connectors for cameras and photoflash units - Electrical characteristics and test methods
  • BS ISO 8600-2:2002 Optics and optical instruments - Medical endoscopes and endoscopic accessories - Particular requirements for rigid bronchoscopes
  • 18/30381811 DC BS EN IEC 62977-2-2. Electronic displays. Part 2-2. Measurements of optical characteristics. Ambient performance
  • BS EN 62496-2:2017 Optical circuit boards. Basic test and measurement procedures - General guidance for definition of measurement conditions for optical characteristics of optical circuit boards
  • BS DD CLC/TS 61496-2:2003 Safety of machinery - Electro-sensitive protective equipment - Particular requirements for equipment using active opto-electronic protective devices (AOPD)
  • BS DD CLC/TS 61496-2:2009 Safety of machinery. Electro-sensitive protective equipment. Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
  • 21/30440443 DC BS EN IEC 62977-2-7. Electronic displays - Part 2-7. Measurements of optical characteristics. Tiled displays
  • BS IEC 60747-18-4:2023 Semiconductor devices - Semiconductor bio sensors. Evaluation method of noise characteristics of lens-free CMOS photonic array sensors
  • 21/30448583 DC BS EN 62007-1 AMD1. Semiconductor optoelectronic devices for fibre optic system applications. Part 1. Specification template for essential ratings and characteristics
  • 20/30424608 DC BS IEC 62977-3-7. Electronic displays. Part 3-7. Evaluation of optical performances. Tone characteristics
  • 20/30401767 DC BS IEC 62977-3-7. Electronic displays. Part 3-7. Evaluation of optical performances. Tone characteristics
  • 19/30309534 DC BS EN IEC 62109-3. Safety of power converters for use in photovoltaic power systems. Part 3. Particular requirements for electronic devices in combination with photovoltaic elements
  • BS EN 2591-410:1998 Elements of electrical and optical connection - Test methods - Insert retention in housing (axial)
  • BS EN 61675-1:1998+A1:2008 Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs
  • BS EN 61675-1:2014 Radionuclide imaging devices. Characteristics and test conditions. Positron emission tomographs
  • BS 6299:1982 Methods of measurement of the suppression characteristics of passive radio interference filters and suppression components
  • BS IEC 60747-18-5:2023 Semiconductor devices - Semiconductor bio sensors. Evaluation method for light responsivity characteristics of lens-free CMOS photonic array sensor package modules by incident angle of light
  • BS EN 2591-411:1998 Elements of electrical and optical connection - Test methods - Insert retention in housing (torsional)
  • BS EN 61262-5:1995 Characteristics of electro-optical X-ray image intensifiers for medical electrical equipment.. Determination of the detective quantum efficiency
  • BS CECC 00804:1996 Harmonized system of quality assessment for electronic components - Interpretation of 'EN ISO 9000:1994': Reliability aspects for electronic components
  • BS EN IEC 60891:2021 Tracked Changes. Photovoltaic devices. Procedures for temperature and irradiance corrections to measured I-V characteristics
  • BS EN 2591-223:2007 Aerospace series - Elements of electrical and optical connection - Test methods - Part 223: Measurement of characteristic impedance of a coaxial connector or contact
  • BS EN 62024-1:2002 High frequency inductive components - Electrical characteristics and measuring methods - Nanohenry range chip inductor
  • 18/30347126 DC BS EN IEC 62977-2-1. Electronic displays. Part 2-1. Measurements of optical characteristics. Fundamental measurements
  • 19/30393233 DC BS EN IEC 62977-2-1. Electronic displays. Part 2-1. Measurements of optical characteristics. Fundamental measurements
  • BS EN 50636-2-107:2015 Safety of household and similar appliances. Particular requirements for robotic battery powered electrical lawnmower
  • BS PD IEC TS 62607-8-2:2021 Nanomanufacturing. Key control characteristics. Nano-enabled metal-oxide interfacial devices. Test method for the polarization properties by thermally stimulated depolarization current
  • BS EN 62024-1:2008 High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor
  • BS EN 62024-2:2009 High frequency inductive components - Electrical characteristics and measuring methods - Rated current of inductors for DC to DC converters
  • BS PD IEC/TS 62607-5-1:2014 Nanomanufacturing. Key control characteristics. Thin-film organic/nano electronic devices. Carrier transport measurements
  • PD IEC/TS 62607-5-1:2014 Nanomanufacturing. Key control characteristics. Thin-film organic/nano electronic devices. Carrier transport measurements
  • 22/30440624 DC BS EN 62024-2. High frequency inductive components. Electrical characteristics and measuring methods - Part 2. Rated current of inductors for DC-to-DC converters
  • 18/30388259 DC BS EN 62024-2. High frequency inductive components. Electrical characteristics and measuring methods. Part 2. Rated current of inductors for DC to DC converters

Association Francaise de Normalisation, The characteristics of photoelectric devices

  • NF EN IEC 60904-1:2020 Dispositifs photovoltaïques - Partie 1 : mesurage des caractéristiques courant-tension des dispositifs photovoltaïques
  • NF C57-321*NF EN IEC 60904-1:2020 Photovoltaic devices - Part 1 : measurement of photovoltaic current-voltage characteristics
  • NF C57-321*NF EN 60904-1:2007 Photovoltaic devices - Part 1 : measurement of photovoltaic current-voltage characteristics
  • NF EN 60904-1-1:2017 Dispositifs photovoltaïques - Partie 1-1 : mesurage des caractéristiques courant-tension des dispositifs photovoltaïques (PV) multijonctions
  • NF C57-329:2020 Photovoltaic devices - Part 9 : classification of solar simulator characteristics
  • NF EN IEC 60904-9:2020 Dispositifs photovoltaïques - Partie 9 : classification des caractéristiques des simulateurs solaires
  • NF R14-332:1986 Road vehicles. Motor vehicles flasher units. Electrical characteristics.
  • NF EN 60747-5-2:2001 Dispositifs discrets à semiconducteurs et circuits intégrés - Partie 5-2 : dispositifs optoélectroniques - Valeurs limites et caractéristiques essentielles
  • NF EN 60747-5-2/A1:2003 Dispositifs discrets à semiconducteurs et circuits intégrés - Partie 5-2 : dispositifs optoélectroniques - Valeurs limites et caractéristiques essentielles
  • NF C96-005-2/A1*NF EN 60747-5-2/A1:2003 Discrete semiconductor devices and integrated circuits - Partie 5-2 : optoelectronic devices - Essential ratings and characteristics
  • NF C96-005-2*NF EN 60747-5-2:2001 Discrete semiconductor devices and integrated circuits - Part 5-2 : optoelectronic devices - Essential ratings and characteristics
  • NF EN 61829:2016 Champ de modules photovoltaïques (PV) - Mesurage sur site des caractéristiques courant-tension
  • NF R11-416:1989 Passenger cars. Starter motor electrical connections. Dimensional characteristics.
  • UTE C93-717U*UTE C93-717:1994 Electronic components. Characteristics and control of thermal drains.
  • NF EN 61669:2016 Électroacoustique - Mesure des caractéristiques de performances acoustiques des appareils de correction auditive sur une oreille réelle
  • NF C93-801-1:2009 Semiconductor optoelectronic devices for fibre optic system applications - Part 1 : specification template for essential ratings and characteristics.
  • NF C93-801-1*NF EN 62007-1:2015 Semiconductor optoelectronic devices for fibre optic system applications - Part 1 : specification template for essential ratings and characteristics
  • NF UTE C93-717:1994 Composants électroniques - Cartes imprimées - Caractéristiques et contrôles des drains thermiques
  • NF C57-104:1995 Procedures for temperature and irradiance corrections to measured i-V characteristics of crystalline silicon photovoltaic devices.
  • NF C57-104*NF EN 60891:2010 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics.
  • NF EN 62007-1/A1:2022 Dispositifs optoélectroniques à semiconducteurs pour application dans les systèmes à fibres optiques - Partie 1 : Modèle de spécification relatif aux valeurs et caractéristiques essentielles
  • NF EN 62007-1:2015 Dispositifs optoélectroniques à semiconducteurs pour application dans les systèmes à fibres optiques - Partie 1 : modèle de spécification relatif aux valeurs et caractéristiques essentielles
  • NF C86-504:1988 Semiconductor devices. Harmonized system of quality assessment for electronic components. Ambient rated photocouplers with phototransistor output. Blank detail specification.
  • NF EN 62813:2015 Condensateurs au lithium-ion destinés à être utilisés dans les équipements électriques et électroniques - Méthodes d'essai relatives aux caractéristiques électriques
  • NF P21-388*NF EN 13271:2002 Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints
  • NF Z84-219*NF I-ETS 300219:1995 Radio equipment and systems (RES). Land mobile service. Technical characteristics and test conditions for radio equipment transmitting signals to initiate a specific reponse in the receiver.
  • NF ETS 300672:2000 Télécommunications - Transmission et multiplexage (TM) - Caractéristiques génériques des dispositifs et sous-systèmes amplificateurs optiques
  • NF C93-903-29*NF EN 61300-3-29:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29 : examinations and measurements - Spectral transfer characteristics of DWDM devices
  • NF C93-930-2*NF EN 62496-2:2018 Optical circuit boards - Basic test and measurement procedures - Part 2 : general guidance for definition of measurement conditions for optical characteristics of optical circuit boards
  • NF EN 62496-2:2018 Cartes à circuits optiques - Procédures fondamentales d'essais et de mesures - Partie 2 : recommandations générales relatives à la détermination des conditions de mesure des caractéristiques optiques des cartes à circuits optiques
  • NF EN 61262-6:1994 Appareils électromédicaux - Caractéristiques des intensificateurs électro-optiques d'image radiologique partie 6 : détermination du rapport de contraste et du voile lumineux
  • NF EN 61262-4:1994 Appareils électromédicaux - Caractéristiques des intensificateurs électro-optiques d'image radiologique partie 4 : détermination de la distorsion d'image
  • NF EN 61788-14:2014 Supraconductivité - Partie 14 : dispositifs supraconducteurs de puissance - Exigences générales pour les essais de caractéristiques d'amenées de courant conçus pour alimenter des dispositifs supraconducteurs
  • NF EN 61262-2:1994 Appareils électromédicaux - Caractéristiques des intensificateurs électro-optiques d'image radiologique partie 2 : détermination du facteur de conversion
  • NF C93-370-2*NF EN IEC 62024-2:2020 High frequency inductive components - Electrical characteristics and measuring methods - Part 2 : rated current of inductors for DC to DC converters
  • NF C93-370-2*NF EN 62024-2:2015 High frequency inductive components - Electrical characteristics and measuring methods - Part 2 : rated current of inductors for DC to DC converters
  • NF C93-370-1*NF EN IEC 62024-1:2018 High frequency inductive components - Electrical characteristics and measuring methods - Part 1 : nanohenry range chip inductor
  • NF EN 2591-223:2008 Série aérospatiale - Organes de connexion électrique et optique - Méthodes d'essais - Partie 223 : mesure de l'impédance caractéristique d'un connecteur ou d'un contact coaxial
  • NF EN 61262-1:1994 Appareils électromédicaux - Caractéristiques des intensificateurs électro-optiques d'image radiologique partie 1 : détermination de la dimension du champ d'entrée
  • NF EN 61262-5:1994 Appareils électromédicaux - Caractéristiques des intensificateurs électro-optiques d'image radiologique partie 5 : détermination de l'efficacité quantique de détection
  • NF E48-412*NF ISO 6952:1995 Fluid power systems and components. Two-pin electrical plug connectors with earth contact. Characteristics and requirements.
  • NF E48-411*NF ISO 4400:1995 Fluid power systems and components. Three-pin electrical plug connectors with earth contact. Characteristics and requirements.
  • NF C73-876/A1:2002 Safety of household and similar electrical appliances - Part 2-76 : particular requirements for electric fence energizers.
  • NF C74-215/A1:2009 Radionuclide imaging devices - Characteristics and test conditions - Part 1 : positron emission tomographs.
  • NF C74-215*NF EN 61675-1:2014 Radionuclide imaging devices - Characteristics and test conditions - Part 1 : positron emission tomographs
  • NF EN 61262-7:1996 Appareils électromédicaux - Caractéristiques des intensificateurs électro-optiques d'image radiologique - Partie 7 : détermination de la fonction de transfert de modulation.
  • NF EN 61262-3:1994 Appareils électromédicaux - Caractéristiques des intensificateurs électro-optiques d'image radiologique partie 3 : détermination de la distribution de luminance et de la non-uniformité de luminance
  • NF C97-628*NF EN 60118-8:2006 Electroacoustics - Hearing aids - Part 8 : methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions
  • NF L54-002-223*NF EN 2591-223:2008 Aerospace series - Elements of electrical and optical connection - Test methods - Part 223 : measurement of characteristic impedance of a coaxial connector or contact.

German Institute for Standardization, The characteristics of photoelectric devices

  • DIN EN 61727:1996 Photovoltaic (PV) systems - Characteristics of the utility interface (IEC 61727:1995); German version EN 61727:1995
  • DIN EN 60904-1:2007 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics (IEC 60904-1:2006); German version EN 60904-1:2006
  • DIN EN 60118-8:2006 Electroacoustics - Hearing aids - Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions (IEC 60118-8:2005); German version EN 60118-8:2005
  • DIN 4000-20:1988 Tabular layouts of article characteristics for opto-electronic semiconductor devices
  • DIN ISO 10330:2007 Photography - Synchronizers, ignition circuits and connectors for cameras and photoflash units - Electrical characteristics and test methods (ISO 10330:2002)
  • DIN EN 61262-5:1995 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the detective quantum efficiency (IEC 61262-5:1994); German version EN 61262-5:1994
  • DIN EN 62496-2:2018-10 Optical circuit boards - Basic test and measurement procedures - Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards (IEC 62496-2:2017); German version EN 62496-2:2017
  • DIN ISO 10330:2007-03 Photography - Synchronizers, ignition circuits and connectors for cameras and photoflash units - Electrical characteristics and test methods (ISO 10330:2002)
  • DIN EN 61496-2:2014 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:2013); German version EN 61496-2:2013
  • DIN CLC/TS 61496-2:2008 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) (IEC 61496-2:2006); German version CLC/TS 61496-2:2006
  • DIN EN 61262-1:1995 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 1: Determination of the entrance field size (IEC 61262-1:1994); German version EN 61262-1:1994
  • DIN EN 61262-4:1995 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 4: Determination of the image distortion (IEC 61262-4:1994); German version EN 61262-4:1994
  • DIN EN 62007-1:2023-07 Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics (IEC 62007-1:2015 + AMD1:2022); German version EN 62007-1:2015 + A1:2022 / Note: DIN EN 62007-1 (2016-03...
  • DIN EN 60747-5-2:2003 Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices; Essential ratings and characteristics (IEC 60747-5-2:1997 + A1:2002); German version EN 60747-5-2:2001 + A1:2002
  • DIN EN IEC 62024-2:2022-11 High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters (IEC 51/1409/CD:2022); Text in German and English / Note: Date of issue 2022-10-14*Intended as replaceme...
  • DIN EN 61262-3:1995 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity (IEC 61262-3:1994); German version EN 61262-3:1994
  • DIN EN 2591-223:2009-01 Aerospace series - Elements of electrical and optical connection - Test methods - Part 223: Measurement of characteristic impedance of a coaxial connector or contact; German and English version EN 2591-223:2007 / Note: Applies in conjunction with DIN E...
  • DIN EN 60118-8:2006-08 Electroacoustics - Hearing aids - Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions (IEC 60118-8:2005); German version EN 60118-8:2005 / Note: DIN V 45606 (1989-11) remains valid al...
  • DIN EN 60601-2-22:1996 Medical electrical equipment - Part 2: Particular requirements for the safety of diagnostic and therapeutic laser equipment (IEC 60601-2-22:1995); German version EN 60601-2-22:1996
  • DIN VDE 0278-631-3:2009 Electric cables - Accessories - Material characterisation - Part 3: Fingerprinting for heat shrinkable components for medium voltage applications from 3,6/6 (7,2) kV up to 20,8/36 (42) kV; German version HD 631.3 S1:2008
  • DIN EN 2591-707:2002 Aerospace series - Elements of electrical and optical connection; Test methods - Part 707: Electrical elements; Measurement of characteristic impedance of a bus or a stub terminator; German and English version EN 2591-707:2001
  • DIN EN 61262-7:2002 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 7: Determination of the modulation transfer function (IEC 61262-7:1995); German version EN 61262-7:1995
  • DIN EN 61262-7:2002-05 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 7: Determination of the modulation transfer function (IEC 61262-7:1995); German version EN 61262-7:1995
  • DIN EN 61262-6:1995 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6: Determination of the contrast ratio and veiling glare index (IEC 61262-6:1994); German version EN 61262-6:1994
  • DIN EN IEC 62024-2:2021-10 High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters (IEC 62024-2:2020); German version EN IEC 62024-2:2020 / Note: DIN EN 62024-2 (2009-08) remains valid al...
  • DIN EN IEC 62024-2:2019 High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converters (IEC 51/1264/CD:2018); Text in German and English

RO-ASRO, The characteristics of photoelectric devices

  • STAS 12258/7-1987 OPTOELECTRONIC SEMICONDIC- TOH DEVICES PHOTOVOLTAIC CELLS Terminology and essential cliarac! eristics
  • STAS 12258/3-1985 Optoelectronic semiconductor devices PHOTOTRANSISTORS Terminology and essential characteristics
  • STAS 12258/6-1987 OPTOELECTRONIC SEMICON- DUCTOR DEVICES INFRARED EMM1TING DIODES Terminology and essential characteristics

Korean Agency for Technology and Standards (KATS), The characteristics of photoelectric devices

  • KS C IEC 60904-1:2009 Photovoltaic devices-Part 1:Measurement of photovoltaic current-voltage characteristics
  • KS C IEC 60904-1-2009(2020) Photovoltaic devices－Part 1：Measurement of photovoltaic current-voltage characteristics
  • KS C IEC 62007-1:2003 Semiconduct optoelectronic devices for fibre optic system applications ? Part 1：Essential ratings and characteristics
  • KS C IEC 60747-5-2:2020 Discrete semiconductor devices and integrated circuits —Part 5-2: Optoelectronic devices — Essential ratings and characteristics
  • KS C IEC 62109-2-2013(2018) Safety of power converters for use in photovoltaic power system – Part 2: Particular requirements for inverters
  • KS C IEC 60747-5-2:2004 Discrete semiconductor devices and integrated circuits－Part 5－2：Optoelectronic devices Essential ratings and characteristics
  • KS C IEC 62007-1-2003(2018)
  • KS C IEC 60891-2012(2022) Photovoltaic devices－Procedures for temperature and irradiance corrections to measured I-V characteristics
  • KS C IEC 60891-2012(2017) Photovoltaic devices－Procedures for temperature and irradiance corrections to measured I-V characteristics
  • KS C IEC 60891:2012 Photovoltaic devices－Procedures for temperature and irradiance corrections to measured I-V characteristics
  • KS C IEC 61287-1:2015 Railway applications — Power convertors installed on board rolling stock — Part 1: Characteristics and test methods
  • KS C IEC 61287-1:2003 Power convertors installed on board rolling stock-Part 1:Characteristics and test methods
  • KS C IEC 61262-7:2003 Medical electrical equipment－Characteristics of electro-optical X-ray image intensifiers－Part 7：Determination of the modulation transfer function
  • KS C IEC 61496-3:2004 Safety of machinery-Electro-sensitive protective equipment-Part 3:Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection(AOPDDR)
  • KS C IEC 61496-3:2014 Safety of machinery－Electro－sensitive protective equipment－Part 3：Particular requirements for Active Opto－electronic Protective Devices responsive to Diffuse Reflection(AOPDDR)
  • KS C IEC 61788-14:2020 Superconductivity — Part 14: Superconducting power devices —General requirements for characteristic tests of current leads designed for powering superconducting devices
  • KS C IEC 61262-6:2003 Medical electrical equipment－Characteristics of electro-optical X-ray image intensifiers－Part 6：Determination of the contrast ratio and veiling glare index
  • KS B ISO 8600-2-2016(2021) Optics and optical instruments－Medical endoscopes and endoscopic accessories－Part 2：Particular requirements for rigid bronchoscopes
  • KS C IEC 61262-5:2003 Medical electrical equipment－Characteristics of electro-optical X-ray image intensifiers－Part 5：Determination of the detective quantum efficiency
  • KS C CISPR 17-2014 Methods of measurement of the suppression characteristics of passive radio interference filters and suppression components
  • KS C IEC 61262-1:2003 Medical electrical equipment－Characteristics of electro－optical X－ray image intensifiers－Part 1：Determination of the entrance field size
  • KS C IEC 61262-4:2003 Medical electrical equipment－Characteristics of electro-optical X-ray image intensifiers－Part 4：Determination of the image distortion
  • KS C IEC 61262-2:2003 Medical electrical equipment－Characteristics of electro－optical X－ray image intensifiers－Part 2：Determination of the conversion factor
  • KS C IEC 61262-4-2003(2018)
  • KS C IEC 61262-6-2003(2018)
  • KS C IEC 61262-2-2003(2018)
  • KS W ISO 5066-1-2003(2008) Aircraft－Hermetically sealed monostable electrical relays, 2A and 3A－Part 1：Operating characteristics and test conditions
  • KS C IEC 60439-3-2003(2013) Low-voltage switchgear and controlgear assemblies. Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have
  • KS C IEC 61262-1-2003(2018)

International Electrotechnical Commission (IEC), The characteristics of photoelectric devices

  • IEC 60904-1:1987 Photovoltaic devices; part 1: measurement of photovoltaic current-voltage characteristics
  • IEC 60904-1:2006 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • IEC 60904-1:2020 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • IEC TS 60904-1-2:2019 Photovoltaic devices - Part 1-2: Measurement of current-voltage characteristics of bifacial photovoltaic (PV) devices
  • IEC 60904-1-1:2017 Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices
  • IEC 62007-1:1999 Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Essential ratings and characteristics
  • IEC TR 62977-2-5:2018 Electronic displays devices - Part 2-5: Transparent displays - Measurements of optical characteristics
  • IEC 62007-1/AMD1:1998 Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Essential ratings and characteristics; Amendment 1
  • IEC 60747-5-2:1997/AMD1:2002 Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices; Essential ratings and characteristics; Amendment 2
  • IEC 60747-5-2:1997+AMD1:2002 CSV Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics
  • IEC 60118-8:2005 Electroacoustics - Hearing aids - Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions
  • IEC 60747-5-2:2009 Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics
  • IEC 62007-1:2015+AMD1:2022 CSV Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics
  • IEC 62977-2-2:2020 Electronic displays - Part 2-2: Measurements of optical characteristics - Ambient performance
  • IEC 62977-3-7:2022 Electronic displays - Part 3-7: Evaluation of optical performance - Tone characteristics
  • IEC 60891:2021 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
  • IEC 62007-1:2015 Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics
  • IEC 62007-1:2008 Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics
  • IEC 62007-1:2015/AMD1:2022 Amendment 1 - Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics
  • IEC 62109-3:2020 Safety of power converters for use in photovoltaic power systems - Part 3: Particular requirements for electronic devices in combination with photovoltaic elements
  • IEC 62977-2-1:2021 Electronic displays - Part 2-1: Measurements of optical characteristics - Fundamental measurements
  • IEC 62047-30:2017 Semiconductor devices - Micro-electromechanical devices - Part 30: Measurement methods of electro-mechanical conversion characteristics of MEMS piezoelectric thin film
  • IEC 60891:1987 Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicone photovoltaic devices
  • IEC 60891:2009 Photovoltaic devices - Procedures for temperature and irradiance corrections to measured I-V characteristics
  • IEC 61287-1:1995 Power convertors installed on board rolling stock - Part 1: Characteristics and test methods
  • IEC 62047-42:2022 Semiconductor devices - Micro-electromechanical devices - Part 42: Measurement methods of electro-mechanical conversion characteristics of piezoelectric MEMS cantilever
  • IEC 62149-4:2003 Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
  • IEC 61262-1:1994 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 1: Determination of the entrance field size
  • IEC 61300-3-29:2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices
  • IEC 62496-2:2017 Optical circuit boards - Basic test and measurement procedures - Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards
  • IEC 60891/AMD1:1992 Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices; amendment 1
  • IEC 61262-4:1994 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 4: Determination of the image distortion
  • IEC 61262-2:1994 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 2: Determination of the conversion factor
  • IEC 61287-1:2014 Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
  • IEC 61287-1:2005 Railway applications - Power convertors installed on board rolling stock - Part 1: Characteristics and test methods
  • IEC 61262-3:1994 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity
  • IEC 62047-35:2019 Semiconductor devices – Micro-electromechanical devices - Part 35: Test method of electrical characteristics under bending deformation for flexible electro-mechanical devices
  • IEC 62024-2:2020 RLV High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters
  • IEC 60335-2-113:2016/AMD1:2021 Amendment 1 - Household and similar electrical appliances - Safety - Part 2-113: Particular requirements for beauty care appliances incorporating lasers and intense light sources
  • IEC 61262-7:1995 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part-7: Determination of the modulation transfer function
  • IEC 61300-2-14:2005 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Optical power handling and damage threshold characterization
  • IEC 60335-2-84:2002/AMD1:2008 Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilets; Amendment 1
  • IEC TS 62607-8-2:2021 Nanomanufacturing - Key control characteristics - Part 8-2: Nano-enabled metal-oxide interfacial devices - Test method for the polarization properties by thermally stimulated depolarization current
  • IEC 62024-1:2017 High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor
  • IEC 61347-2-3/AMD2:2006 Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps; Amendment 2
  • IEC 60947-5-3:2013 Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
  • IEC 61675-1:2008 Radionuclide imaging devices - Characteristics and test conditions - Part 1: Positron emission tomographs
  • IEC 60747-18-4:2023 Semiconductor devices - Part 18-4: Semiconductor bio sensors - Evaluation method of noise characteristics of lens-free CMOS photonic array sensors
  • IEC 60747-18-5:2023 Semiconductor devices - Part 18-5: Semiconductor bio sensors - Evaluation method for light responsivity characteristics of lens-free CMOS photonic array sensor package modules by incident angle of lig
  • IEC 61262-6:1994 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6: Determination of the contrast ratio and veiling glare index
  • IEC 61496-2:1997 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
  • IEC 61496-2:2006 Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
  • CISPR 15 INT 2-2013 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment - Interpretation sheet to test conditions for wall dimmers; Interpretation Sheet 2
  • IEC 60335-2-87:2002/AMD2:2012 Amendment 2 - Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal-stunning equipment

Danish Standards Foundation, The characteristics of photoelectric devices

  • DS/EN 60904-1:1994 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • DS/EN 60904-1:2007 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • DS/EN IEC 60904-1:2020 Photovoltaic devices – Part 1: Measurement of photovoltaic current-voltage characteristics
  • DS/EN IEC 60904-9:2020 Photovoltaic devices – Part 9: Classification of solar simulator characteristics
  • DS/EN 60747-5-2/A1:2002 Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics
  • DS/EN 60747-5-2:2002 Discrete semiconductor devices and integrated circuits - Part 5-2: Optoelectronic devices - Essential ratings and characteristics
  • DS/EN 60118-8:2006 Electroacoustics - Hearing aids - Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions
  • DS/EN 62007-1:2009 Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics
  • DS/IEC 62977-2-1:2021 Electronic displays – Part 2-1: Measurements of optical characteristics – Fundamental measurements
  • DS/EN 62109-2:2011 Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters
  • DS/IEC/TS 62578:2010 Power electronics systems and equipment - Operation conditions and characteristics of active infeed converter applications
  • DS/EN 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
  • DS/EN 62024-1:2008 High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor
  • DS/EN 62024-2:2009 High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converters
  • DS/EN 2591-223:2008 Aerospace series - Elements of electrical and optical connection - Test methods - Part 223: Measurement of characteristic impedance of a coaxial connector or contact
  • DS/IEC CISPR 17:1994 Methods of measurement of the suppression characteristics of passive radio interference filters and suppression components
  • DS/EN 61262-4:2013 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 4: Determination of the image distortion
  • DS/EN 61262-2:2013 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 2: Determination of the conversion factor
  • DS/EN 61262-6:2013 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6: Determination of the contrast ratio and veiling glare index
  • DS/ETSI EN 301 925 V1.6.1:2021 Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement
  • DS/EN 300219-1 V1.2.1:2002 Electromagnetic compatibility and Radio spectrum Matters (ERM); Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Part 1: Technical characteristics and methods of measurement
  • DS/EN 2591-707:2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 707: Electrical elements - Measurement of characteristic impedance of a bus or a stub terminator
  • DS/EN 61262-1:2013 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 1: Determination of the entrance field size
  • DS/EN 61262-7:1996 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 7: Determination of the modulation transfer function
  • DS/EN 61262-5:2013 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 5: Determination of the detective quantum efficiency
  • DS/EN 61262-3:2013 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 3: Determination of the luminance distribution and luminance non-uniformity
  • DS/EN 301925 V1.3.1:2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement
  • DS/EN 301925 V1.2.1:2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement
  • DS/EN 301925 V1.1.1:2004 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement
  • DS/EN 301 925 V1.4.1:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement

Japanese Industrial Standards Committee (JISC), The characteristics of photoelectric devices

  • JIS C 8904-1:2019 Photovoltaic devices -- Part 1: Measurement of photovoltaic current-voltage characteristics
  • JIS C 5953-4:2008 Fiber optic active components and devices -- Performance standards -- Part 4: 1 300 nm fiber optic transceivers for gigabit Ethernet application
  • JIS C 62024-1:2022 High frequency inductive components -- Electrical characteristics and measuring methods -- Part 1: Nanohenry range chip inductor
  • JIS C 62024-2:2022 High frequency inductive components -- Electrical characteristics and measuring methods -- Part 2: Rated current of inductors for DC to DC converters
  • JIS B 8388:2000 Fluid power systems and components -- Three-pin electrical plug connectors with earth contact -- Characteristics and requirements
  • JIS B 8389:2000 Fluid power systems and components -- Two-pin electrical plug connectors with earth contact -- Characteristics and requirements
  • JIS B 9704-2:2008 Safety of machinery -- Electro-sensitive protective equipment -- Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
  • JIS B 9704-2:2017 Safety of machinery -- Electro-sensitive protective equipment -- Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)

European Committee for Electrotechnical Standardization（CENELEC）, The characteristics of photoelectric devices

  • EN IEC 60904-1:2020 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • EN 60904-1-1:2017 Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices
  • EN 60904-1:2006 Photovoltaic devices Part 1: Measurement of photovoltaic current-voltage characteristics
  • EN IEC 60904-9:2020 Photovoltaic devices - Part 9: Classification of solar simulator characteristics
  • EN 62007-1:2015 Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics
  • EN 62109-2:2011 Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters
  • EN 60747-5-2:2001 Discrete Semiconductor Devices and Integrated Circuits - Part 5-2: Optoelectronic Devices - Essential Ratings and Characteristics (Incorporates Amendment A1: 2002)
  • EN 60118-8:2005 Electroacoustics - Hearing aids Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions
  • CLC/TS 61496-2-2006 Safety of machinery - Electro-sensitive protective equipment Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
  • EN IEC 62109-3:2022 Safety of power converters for use in photovoltaic power systems - Part 3: Particular requirements for electronic devices in combination with photovoltaic elements
  • EN 61300-2-14:2013 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power
  • EN 62496-2:2017 Optical circuit boards - Basic test and measurement procedures - Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards
  • EN 61788-14:2010 Superconductivity - Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices
  • EN 61340-5-3:2010 Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classifications for packaging intended for electrostatic discharge sensitive devices
  • EN 61340-5-3:2015 Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices
  • EN 62024-2:2009 High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converters
  • EN IEC 62024-2:2020 High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters
  • EN 61300-2-14:2006 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests - Optical power handling and damage threshold characterization
  • EN 61496-3:2001 Safety of Machinery - Electro-Sensitive Protective Equipment Part 3: Particular Requirements for Active Opto-Electronic Protective Devices Responsive to Diffuse Reflection (AOPDDR)
  • EN 61262-2:1994 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 2: Determination of the Conversion Factor
  • EN 61262-4:1994 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 4: Determination of the Image Distortion
  • EN 61262-3:1994 Medical Electrical Equipment - Characteristics of Electro-Optical X-Ray Image Intensifiers Part 3: Determination of the Luminance Distribution and Luminance Non-Uniformity

Indonesia Standards, The characteristics of photoelectric devices

RU-GOST R, The characteristics of photoelectric devices

  • GOST R IEC 60904-1-2013 Photovoltaic devices. Part 1. Measurement of photovoltaic current-voltage characteristics
  • GOST 25774-1983 Image-intensifier and image-converter tubes. The determination of amplitude frequency characteristic method
  • GOST R 59607-2021 Optics and photonics. Semiconducting photoelectric detectors. Photoelectric and photoreceiving devices. Methods of measuring photoelectric parameters and determining characteristics
  • GOST R ISO 11554-2008 Optics and photonics. Lasers and laser-related equipment. Test methods for laser beam power, energy and temporal characteristics
  • GOST 17772-1988 Semiconducting photoelectric detectors and receiving photoelectric devices. Methods of measuring photoelectric parameters and determining characteristics
  • GOST 21316.6-1975 Photocells. Determination method of correspondence of current-illumination characteristic of photocell to given linearity limit in continuous operation conditions
  • GOST 21316.7-1975 Photocells. Determination method of correspondence of current-illumination characteristic of photocell to given linearity limit in pulsed operation conditions
  • GOST R IEC 60118-8-2010 Electroacoustics. Hearing aids. Part 8. Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions
  • GOST 21815.18-1990 Image intensifier and image converter tubes. Modulation franster function
  • GOST R 59606-2021 Optics and photonics. Photodetector devices of second and next-generations. Methods for photoelectric parameters measuring and determination of characteristics
  • GOST R IEC 60891-2013 State system for ensuring the uniformity of measurements. Photovoltaic devices. Procedures for temperature and irradiance corrections to measured current voltage characteristics
  • GOST IEC 61262-6-2011 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 6. Determination of the contrast ratio and veiling glare index
  • GOST R IEC 61262-6-1999 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 6. Determination of the contrast ratio and veiling glare index
  • GOST IEC 61262-1-2011 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 1. Determination of the entrance field size
  • GOST R IEC 61262-5-1999 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 5. Determination of the detective quantum efficiency
  • GOST IEC 61262-3-2011 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 3. Determination of the luminance distribution and luminance non-uniformity
  • GOST R 51530-1999 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 2. Determination of the conversion factor
  • GOST R 51531-1999 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 4. Determination of the image distirtion
  • GOST R 59614-2021 Connections of elements of wooden constructions on a ring connectors. Test methods for determining the values of characteristic and design resistance and compliance
  • GOST IEC 60335-2-15-2014 Household and similar electrical appliances. Safety. Part 2-15. Particular requirements for appliances for heating liquids
  • GOST IEC 61262-5-2011 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 5. Determination of the detective quantum efficiency
  • GOST IEC 61262-7-2011 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 7. Determination of the modulation transfer function
  • GOST R IEC 61262-7-1999 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 7. Determination of modulation transfer function
  • GOST R IEC 61262-3-1999 Medical electrical equipment. Characteristics of electro-optical X-ray image intensifiers. Part 3. Determination of the luminance distribution and luminance non-uniformity

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, The characteristics of photoelectric devices

  • GB/T 6495.1-1996 Photovoltaic devices. Part 1: Measurement of photovoltaic current-voltage characteristics
  • GB/T 6495.10-2012 Photovoltaic devices.Part 10:Methods of linearity measurement
  • GB/T 15651.2-2003 Discrete semiconductor devices and integrated circuits Part 5-2:Optoelectronic devices Essential ratings and characteristics
  • GB/T 15651.2-2003/IEC 60747-5-2:1997 Semiconductor discrete devices and integrated circuits - Part 5-2: Basic ratings and characteristics of optoelectronic devices
  • GB/T 31248-2014 Test methods for the measurement of flame spread, heat release and smoke production on electric or optical fibre cables under fire conditions
  • GB/T 17651.1-1998 Measurement of smoke density of cables burning under defined conditions. Part 1: Test apparatus
  • GB/T 6495.4-1996 Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices
  • GB/T 17651.2-1998 Measurement of smoke density of cables burning under defined conditions. Part 2: Test procedure and requirements
  • GB 39275-2020 Operating conditions and characteristics of active infeed converter (AIC) applications in power electronic systems and equipment
  • GB/T 19436.2-2004 Electrical safety of machinery-Electro-sensitive protective equipment-Part 2:Particular requirements for equipment using ative opto-electronic protective devices(AOPDs)
  • GB/T 7343-1987 Method of measurement of the suppression characteristics of passive radio interference filters and suppression components over the frequency range of 10kHz to 30MHz
  • GB 7343-1987 the frequency range of 10kHz to 30MHz Methods of measurement of the suppresion characteristics of passive radio interference filters and suppression components over

Standard Association of Australia （SAA）, The characteristics of photoelectric devices

  • AS/NZS IEC 60904.1:2023 Photovoltaic devices, Part 1: Measurement of photovoltaic current-voltage characteristics
  • AS 60118.8:2007 Hearing aids - Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions
  • AS/NZS IEC 62109.3:2023 Safety of power converters for use in photovoltaic power systems, Part 3: Particular requirements for electronic devices in combination with photovoltaic elements
  • AS/NZS 4356.1:1996 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Determination of the entrance field size
  • AS/NZS 4356.4:1996 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Determination of the image distortion
  • AS/NZS 4356.2:1996 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Determination of the conversion factor
  • AS/NZS 60745.2.4:2003 Hand-held motor-operated electric tools - Safety - Particular requirements for sanders and polishers
  • AS/NZS 4356.3:1996 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Determination of the luminance distribution and luminance non-uniformity
  • AS/NZS 4356.6:1996 Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Determination of the contrast ratio and veiling glare index

ES-UNE, The characteristics of photoelectric devices

  • UNE-EN IEC 60904-1:2021 Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics
  • UNE-EN 60904-1-1:2018 Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices
  • UNE-EN IEC 60904-9:2021 Photovoltaic devices - Part 9: Classification of solar simulator characteristics
  • UNE-EN 60747-5-2:2001 Discrete semiconductor devices and integrated circuits -- Part 5-2: Optoelectronic devices - Essential ratings and characteristics. (Endorsed by AENOR in October of 2001.)
  • UNE-EN 60747-5-2:2001/A1:2002 Discrete semiconductor devices and integrated circuits -- Part 5-2: Optoelectronic devices - Essential ratings and characteristics (Endorsed by AENOR in November of 2002.)
  • UNE-EN 62007-1:2015/A1:2022 Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics (Endorsed by Asociación Española de Normalización in December of 2022.)
  • UNE-EN 62007-1:2015 Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics (Endorsed by AENOR in August of 2015.)
  • UNE-EN IEC 62109-3:2023 Safety of power converters for use in photovoltaic power systems - Part 3: Particular requirements for electronic devices in combination with photovoltaic elements
  • UNE-EN 62496-2:2017 Optical circuit boards - Basic test and measurement procedures - Part 2: General guidance for definition of measurement conditions for optical characteristics of optical circuit boards (Endorsed by Asociación Española de Normalización in November of...
  • UNE-EN 61788-14:2010 Superconductivity -- Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices (Endorsed by AENOR in November of 2010.)
  • UNE-EN IEC 62024-2:2020 High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC-to-DC converters (Endorsed by Asociación Española de Normalización in July of 2020.)
  • UNE-EN 2591-707:2001 Aerospace series - Elements of electrical and optical connection - Test methods - Part 707: Electrical elements - Measurement of characteristic impedance of a bus or a stub terminator. (Endorsed by AENOR in April of 2002.)
  • UNE-EN IEC 62024-1:2018 High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor (Endorsed by Asociación Española de Normalización in April of 2018.)

CENELEC - European Committee for Electrotechnical Standardization, The characteristics of photoelectric devices

  • EN 60904-1:1993 Photovoltaic Devices Part 1: Measurement of Photovoltaic Current-Voltage Characteristics
  • EN 62007-1:2000 Semiconductor Optoelectronic Devices for Fibre Optic System Applications Part 1: Essential Ratings and Characteristics
  • EN 62007-1:2009 Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics
  • EN 61300-2-14:1997 Fibre Optic Interconnecting Devices and Passive Components Basic Test and Measurement Procedures Part 2-14: Tests - Maximum Input Power
  • EN IEC 62024-1:2018 High frequency inductive components - Electrical characteristics and measuring methods - Part 1: Nanohenry range chip inductor
  • EN 60891:1994 Procedures for Temperature and Irradiance Corrections to Measured I- V Characteristics of Crystalline Silicon Photovoltaic Devices

IN-BIS, The characteristics of photoelectric devices

International Telecommunication Union (ITU), The characteristics of photoelectric devices

  • ITU-T G.662 ARABIC-2005 Generic Characteristics of Optical Amplifier Devices and Subsystems
  • ITU-T G.662 CHINESE-2005 Generic Characteristics of Optical Amplifier Devices and Subsystems
  • ITU-T G.662 RUSSIAN-2005 Generic Characteristics of Optical Amplifier Devices and Subsystems
  • ITU-T V.31BIS-1988 Electrical characteristics for single-current interchange circuits using optocouplers
  • ITU-T G.973-2016 Characteristics of repeaterless optical fibre submarine cable systems (Study Group 15)
  • ITU-T G.665-2005 Generic characteristics of Raman amplifiers and Raman amplified subsystems SERIES G: TRANSMISSION SYSTEMS AND MEDIA DIGITAL SYSTEMS AND NETWORKS Transmission media characteristics Characteristics of optical components and subsystems Study Group 15
  • ITU-T V.31 BIS-1988 ELECTRICAL CHARACTERISTICS FOR SINGLE-CURRENT INTERCHANGE CIRCUITS USING OPTOCOUPLERS

Taiwan Provincial Standard of the People's Republic of China, The characteristics of photoelectric devices

  • CNS 13059.1-1992 Photovoltaic Devices Part 1:Measurement of Photovoltaic Current─Voltage Characteristics
  • CNS 13059-1-1992 Photovoltaic Devices Part 1:Measurement of Photovoltaic Current─Voltage Characteristics
  • CNS 13213-1993 Procedures for Temperature and Irradiance Corrections to Measured I-V Characteristics of Crystalline Silicon Photovoltaic Devices

KR-KS, The characteristics of photoelectric devices

  • KS C IEC 60747-5-2-2020 Discrete semiconductor devices and integrated circuits —Part 5-2: Optoelectronic devices — Essential ratings and characteristics
  • KS C IEC 60891-2023 Photovoltaic devices — Procedures for temperature and irradiance corrections to measured I-V characteristics
  • KS C IEC 61788-14-2020 Superconductivity — Part 14: Superconducting power devices —General requirements for characteristic tests of current leads designed for powering superconducting devices
  • KS B ISO 8600-2-2016 Optics and optical instruments－Medical endoscopes and endoscopic accessories－Part 2：Particular requirements for rigid bronchoscopes
  • KS C IEC 61340-5-3-2023 Electrostatics — Part 5-3: Protection of electronic devices from electrostatic phenomena — Properties and requirements classification for packaging intended for electrostatic discharge sensitive devic

未注明发布机构, The characteristics of photoelectric devices

  • BS EN 60747-5-2:2001(2003) Discretesemiconductor devices and integrated circuits — Part 5 - 2 : Optoelectronic devices — Essential ratings and characteristics
  • YY 0457.6-2003 Medical electrical equipment. Characteristics of photoelectric X-ray image intensifiers. Part 6: Determination of contrast and glare coefficient
  • YY 0457.2-2003 Medical electrical equipment. Characteristics of photoelectric X-ray image intensifiers. Part 2: Determination of conversion coefficients
  • YY 0457.4-2003 Medical electrical equipment. Characteristics of photoelectric X-ray image intensifiers. Part 4: Determination of image distortion
  • YY 0457.3-2003 Medical electrical equipment. Characteristics of photoelectric X-ray image intensifiers. Part 3: Determination of brightness distribution and non-uniformity
  • YY 0457.1-2003 Medical electrical equipment. Characteristics of photoelectric X-ray image intensifiers. Part 1: Determination of incident field size
  • YY 0457.5-2003 Medical electrical equipment. Characteristics of photoelectric X-ray image intensifiers. Part 5: Determination of detection quantum efficiency
  • YY 0457.7-2003 Medical electrical equipment. Characteristics of photoelectric X-ray image intensifiers. Part 7: Determination of modulation transfer function

European Committee for Standardization (CEN), The characteristics of photoelectric devices

  • EN 13619:2002 Postal services - Mail item processing - Optical characteristics for processing letters
  • EN 2591-B3:1993 Aerospace Series- Elements of Electrical and Optical Connection - Test Methods - Part B3 : Electrical Continuity at Microvolt Level
  • prEN 60118-0 prA1-1992 Hearing aids; part 0: measurement of electroacoustical characteristics; amendment 1
  • CLC/TS 61496-3-2008 Safety of machinery — Electro sensitive protective equipment — Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)
  • EN 2591-223:2007 Aerospace series - Elements of electrical and optical connection - Test methods - Part 223: Measurement of characteristic impedance of a coaxial connector or contact

Professional Standard - Post and Telecommunication, The characteristics of photoelectric devices

  • YD/T 2001.1-2009 Semiconductor optoelectronic devices for fibre optic system applications.Part 1:Specification template for essential rating and characteristics

International Organization for Standardization (ISO), The characteristics of photoelectric devices

  • ISO/TR 16743:2013 Optics and photonics - Wavefront sensors for characterising optical systems and optical components
  • ISO 11382:2022 Optics and photonics — Optical materials and components — Characterization of optical materials used in the infrared spectral range from 0,78 μm to 25 μm
  • ISO 11382:2010 Optics and photonics - Optical materials and components - Characterization of optical materials used in the infrared spectral range from 0,78 m to 25 m
  • ISO 10330:2002 Photography - Synchronizers, ignition circuits and connectors for cameras and photoflash units - Electrical characteristics and test methods
  • ISO 10330:1992 Photography; synchronizers, ignition circuits and connectors for cameras and photoflash units; electrical characteristics and test methods
  • ISO 4400:1980 Fluid power systems and components — Three-pin electrical plug connector — Characteristics and requirements
  • ISO 4400:1985 Fluid power systems and components — Three-pin electrical plug connector — Characteristics and requirements
  • ISO 5066-1:1986 Aircraft; Hermetically sealed monostable electrical relays, 2A and 3A; Part 1 : Operating characteristics and test conditions

AENOR, The characteristics of photoelectric devices

  • UNE-EN 60118-8:2006 Electroacoustics - Hearing aids -- Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions
  • UNE-I-ETS 300219:1999 RADIO EQUIPMENT AND SYSTEMS (RES). LAND MOBILE SERVICE. TECHNICAL CHARACTERISTICS AND TEST CONDITIONS FOR RADIO EQUIPMENT TRANSMITTING SIGNALS TO INITIATE A SPECIFIC RESPONSE IN THE RECEIVER.
  • UNE-EN 61262-6:1996 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 6: DETERMINATION OF THE CONTRAST RATIO AND VEILING GLARE INDEX.
  • UNE-EN 62109-2:2013 Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters
  • UNE-ETS 300341:1999 RADIO EQUIPMENT AND SYSTEMS (RES). LAND MOBILE SERVICE. TECHNICAL CHARACTERISTICS AND TEST CONDITIONS FOR RADIO EQUIPMENT USING AN INTEGRAL ANTENNA TRANSMITTING SIGNALS TO INITIATE A SPECIFIC RESPONSE IN THE RECEIVER.
  • UNE-EN 61262-4:1996 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 4: DETERMINATION OF THE IMAGE DISTORTION.
  • UNE-EN 61262-2:1996 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 2: DETERMINATION OF THE CONVERSION FACTOR.
  • UNE-EN 61262-1:1996 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 1: DETERMINATION OF THE ENTRANCE FIELD SIZE.
  • UNE-EN 61262-5:1996 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 5: DETERMINATION OF THE DETECTIVE QUANTUM EFFICIENCY.
  • UNE-EN 61262-7:1997 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 7: DETERMINATION OF THE MODULATION TRANSFER FUNCTION.
  • UNE-EN 61262-3:1996 MEDICAL ELECTRICAL EQUIPMENT. CHARACTERISTICS OF ELECTRO-OPTICAL X-RAY IMAGE INTENSIFIERS. PART 3: DETERMINATION OF THE LUMINANCE DISTRIBUTION AND LUMINANCE NON-UNIFORMITY.

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, The characteristics of photoelectric devices

  • ITU-T G.662-1998 Generic Characteristics of Optical Amplifier Devices and Subsystems - Series G: Transmission Systems and Media@ Digital Systems and Networks Transmission Media Characteristics - Characteristics of Optical Components and Subsystems (Study Group 15; 16 pp)
  • ITU-T G.663-1996 Application Related Aspects of Optical Fibre Amplifier Devices and Sub-Systems - Series G: Transmission Systems and Media@ Digital Systems and Networks Transmission Media Characteristics - Characteristics of Optical Components and Sub-Systems (Study Group
  • ITU-T G.661-1998 Definition and Test Methods for the Relevant Generic Parameters of Optical Amplifier Devices and Subsystems - Series G: Transmission Systems and Media@ Digital Systems and Networks Transmission Media Characteristics - Characteristics of Optical Components
  • ITU-T M.1020-1989 Characteristics of Special Quality International Leased Circuits with Special Bandwidth Conditioning - Maintenance of International Telegraph@ Phototelegraph and Leased Circuits - Maintenance of the International Public Telephone Network - Maintenance of
  • ITU-T G.691-2000 Optical Interfaces for Single Channel STM-64@ STM-256 and Other SDH Systmes with Optical Amplifiers - Series G: Transmission Systems and Media@ Digital Systems and Networks Transmission Media Characteristics - Characteristics of Optical Components and Sub
  • ITU-T G.691-2003 Optical interfaces for single channel STM-64 and other SDH systems with optical amplifiers SERIES G: TRANSMISSION SYSTEMS AND MEDIA@ DIGITAL SYSTEMS AND NETWORKS Transmission media characteristics – Characteristics of optical components and subsystems (St
  • ITU-T G.661-1996 Definition and Test Methods for the Relevant Generic Parameters of Optical Fibre Amplifiers - Series G: Transmission Systems and Media Transmission Media Characteristics - Characteristics of Optical Components and Sub-Systems (Study Group 15; 13 pp)

American Society for Testing and Materials (ASTM), The characteristics of photoelectric devices

  • ASTM E811-95 Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
  • ASTM E811-09(2020)e1 Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
  • ASTM D5647-95 Standard Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus
  • ASTM D5647-01 Standard Guide for Measuring Hairiness of Yarns by the Photo-Electric Apparatus
  • ASTM E1040-10(2020) Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells

Professional Standard - Public Safety Standards, The characteristics of photoelectric devices

  • GA/T 716-2007 Test methods for electrical or optical cables under fire conditions.Flame spread,heat release and smoke production measurement during test

ETSI - European Telecommunications Standards Institute, The characteristics of photoelectric devices

  • PRETS 300 672-1995 Transmission and Multiplexing (TM); Relevant Generic Characteristics of Optical Amplifier Devices and Sub-Systems
  • PRETS 300 672-1996 Transmission and Multiplexing (TM); Relevant Generic Characteristics of Optical Amplifier Devices and Sub-Systems
  • ETS 300 672-1996 Transmission and Multiplexing (TM); Relevant Generic Characteristics of Optical Amplifier Devices and Sub-Systems
  • I-ETS 300 219 PRA1-1996 Radio Equipment and Systems (RES); Land Mobile Service; Technical Characteristics and Test Conditions for Radio Equipment Transmitting Signals to Initiate a Specific Response in the Receiver
  • I-ETS 300 219 A1-1996 Radio Equipment and Systems (RES); Land Mobile Service; Technical Characteristics and Test Conditions for Radio Equipment Transmitting Signals to Initiate a Specific Response in the Receiver
  • I-ETS 300 219-1993 Radio Equipment and Systems (RES); Land Mobile Service Technical Characteristics and Test Conditions for Radio Equipment Transmitting Signals to Initiate a Specific Response in the Receiver
  • PRI-ETS 300 219-1993 Radio Equipment and Systems (RES); Land Mobile Service Technical Characteristics and Test Conditions for Radio Equipment Transmitting Signals to Initiate a Specific Response in the Receiver
  • ETSI EN 300 219:1999 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service (RP 02); Technical Characteristics and Test Conditions for Radio Equipment Transmitting Signals to Initiate a Specific Response in the Receiver (V1.2.1)
  • PRETS 300 219-1992 Radio Equipment and Systems (RES); Land Mobile Service Technical Characteristics and Test Conditions for Radio Equipment Transmitting Signals to Initiate a Specific Response in the Receiver (RES 2-02)
  • ETS 300 341-1995 Radio Equipment and Systems (RES); Land Mobile Service; Technical Characteristics and Test Conditions for Radio Equipment Using an Integral Antenna Transmitting Signals to Initiate a Specific Response in the Receiver
  • ETS 300 341 AMD 1-1997 Radio Equipment and Systems (RES); Land Mobile Service; Technical Characteristics and Test Conditions for Radio Equipment Using an Integral Antenna Transmitting Signals to Initiate a Specific Response in the Receiver
  • ETS 300 341 PRA1-1996 Radio Equipment and Systems (RES); Land Mobile Service; Technical Characteristics and Test Conditions for Radio Equipment Using an Integral Antenna Transmitting Signals to Initiate a Specific Response in the Receiver
  • PRETS 300 341-1994 Radio Equipment and Systems (RES); Land Mobile Service Technical Characteristics and Test Conditions for Radio Equipment Using an Integral Antenna Transmitting Signals to Initiate a Specific Response in a Receiver
  • ETSI EN 300 219-1:2001 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service; Radio Equipment Transmitting Signals to Initiate a Specific Response in the Receiver; Part 1: Technical Characteristics and Methods of Measurement (V1.2.1)
  • ETSI EN 300 219-1:2000 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service; Radio Equipment Transmitting Signals to Initiate a Specific Response in the Receiver; Part 1: Technical Characteristics and Methods of Measurement (V1.2.1)
  • ETSI EN 301 925:2017 Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement (V1.5.1)
  • ETSI EN 301 925:2016 Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement (V1.5.0)
  • ETSI EN 301 925:2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement (V1.3.1)
  • ETSI EN 301 925:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement (V1.3.5)

ES-AENOR, The characteristics of photoelectric devices

Group Standards of the People's Republic of China, The characteristics of photoelectric devices

  • T/CPIA 0032-2022 Measurement method of current-voltage (IV) characteristics of perovskite photovoltaic cells and modules

Lithuanian Standards Office , The characteristics of photoelectric devices

  • LST EN 60747-5-2+A1-2002 Discrete semiconductor devices and integrated circuits -- Part 5-2: Optoelectronic devices - Essential ratings and characteristics (IEC 60747-5-2:1997+A1:2002)
  • LST EN 60118-8-2006 Electroacoustics. Hearing aids. Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions (IEC 60118-8:2005)
  • LST L I-ETS 300 219+A1-2000 Radio Equipment and Systems (RES). Land mobile service. Technical characteristics and test conditions for radio equipment transmitting signals to initiate a specific response in the receiver
  • LST EN 62007-1-2015 Semiconductor optoelectronic devices for fibre optic system applications - Part 1: Specification template for essential ratings and characteristics (IEC 62007-1:2015)
  • LST EN 61300-3-29-2014 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices (IEC 61300-3-29:2014)
  • LST ETS 300 341+A1-2000 Radio Equipment and Systems (RES). Land mobile service. Technical characteristics and test conditions for radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver
  • LST EN 2591-223-2008 Aerospace series - Elements of electrical and optical connection - Test methods - Part 223: Measurement of characteristic impedance of a coaxial connector or contact
  • LST ETSI EN 301 925 V1.6.1-2021 Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement
  • LST EN 61788-14-2010 Superconductivity -- Part 14: Superconducting power devices - General requirements for characteristic tests of current leads designed for powering superconducting devices (IEC 61788-14:2010)
  • LST EN 300 219-1 V1.2.1-2005 ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service; Radio equipment transmitting signals to initiate a specific response in the receiver; Part 1: Technical characteristics and methods of measurement
  • LST EN 2591-707-2002 Aerospace series - Elements of electrical and optical connection - Test methods - Part 707: Electrical elements - Measurement of characteristic impedance of a bus or a stub terminator
  • LST EN 62109-2-2011 Safety of power converters for use in photovoltaic power systems -- Part 2: Particular requirements for inverters (IEC 62109-2:2011)
  • LST EN 62024-2-2009 High frequency inductive components - Electrical characteristics and measuring methods - Part 2: Rated current of inductors for DC to DC converters (IEC 62024-2:2008)
  • LST ETS 300 162 Leid.2-2005 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement
  • LST EN 301 925 V1.3.1-2010 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement

IEC - International Electrotechnical Commission, The characteristics of photoelectric devices

  • TS 62715-5-2-2016 Flexible display devices – Part 5-2: Measuring methods of optical characteristics from the vantage point for curved displays (Edition 1.0)
  • TS 62578-2009 Power electronics systems and equipment – Operation conditions and characteristics of active infeed converter applications (Edition 1.0)

工业和信息化部, The characteristics of photoelectric devices

  • SJ/T 11703-2018 Test method for crosstalk characteristics of digital microelectronic device packaging
  • SJ/T 11461.2-2016 Organic Light Emitting Diode Display Devices Part 2: Basic Ratings and Characteristics

Electronic Components, Assemblies and Materials Association, The characteristics of photoelectric devices

  • ECA EIA-364-81A-2005 TP-81 Combustion Characteristics Test Procedure for Electrical Connector Housings, Connector Assemblies and Sockets

Defense Logistics Agency, The characteristics of photoelectric devices

AT-ON, The characteristics of photoelectric devices

  • ONORM ENV 1954-1996 Internal and extemal fault behaviour of safety related electronic parts of gas appliances

国家市场监督管理总局、中国国家标准化管理委员会, The characteristics of photoelectric devices

  • GB/T 17651.1-2021 Measurement of smoke density of cables or optical fiber cables burning under defined conditions—Part 1: Test apparatus
  • GB/T 17651.2-2021 Measurement of smoke density of cables or optical fiber cables burning under defined conditions—Part 2: Test procedure and requirements
  • GB/T 40853.1-2021 High frequency inductive components—Electrical characteristics and measuring method—Part 1：Nanohenry range chip inductor
  • GB/T 39275-2020 Power electronics systems and equipment—Operation conditions and characteristics of active infeed converter (AIC) applications

American National Standards Institute （ANSI), The characteristics of photoelectric devices

  • ANSI/EIA 364-81A:2005 Combustion Characteristics Test Procedure for Electrical Connector Housing, Connector Assemblies and Sockets
  • ANSI/ASTM E1036/E 1036M:1996 Test Methods for Electrical Performance of Non-Concentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells (Metric)
  • ANSI/ASTM E1039:1999 Test Method for Calibration and Characterization of Non-Concentrator Terrestrial Photovoltaic Reference Cells Under Global Irradiation

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, The characteristics of photoelectric devices

  • GB/T 22181.24-2016 Plasma display panels—Part 2-4: Methods for measuring the characteristics of devices for digital television sets

IECQ - IEC: Quality Assessment System for Electronic Components, The characteristics of photoelectric devices

  • QC 301901/US 0004 ISSUE 1-1991 Capacitors for Use in Electrotechnical Equipment: Detail Specification: Fixed Multilayer Ceramic Chip Capacitors for Mounting on Rigid and Non-Rigid Substrates Subclass 1B Rated Voltages: 50 Volts & 100 Volts
  • QC 301901/US 0003 ISSUE 1-1991 Capacitors for Use in Electrotechnical Equipment: Detail Specification: Fixed Multilayer Ceramic Chip Capacitors for Mounting on Rigid and Non-Rigid Substrates Subclass 2R1 and 2X1 Rated Voltages: 50 Volts & 100 Volts

SE-SIS, The characteristics of photoelectric devices

  • SIS SS IEC 601-2-7:1988 Medical electrical equipment — Particular requirements for the safety of high-voltage generators of diagnostic X-ray generators
  • SIS SS 433 07 85-1991 Safety of Household and similar electrical appliances - Particular requirements for heating elements for water mattresses

BE-NBN, The characteristics of photoelectric devices

Professional Standard - Medicine, The characteristics of photoelectric devices

  • YY/T 0457.6-2003 Medical electrical equipment-Characteristics of electro-optical X-ray image intensifiers-Part 6:Determination of the contrast ratio and veiling glare index
  • YY/T 0457.2-2003 Medical electrical equipment-Characteristics of electro-optical X-ray image intensifiers-Part 2:Determination of the conversion factor
  • YY/T 0457.4-2003 Medical electrical equipment-Characteristics of electro-optical X-ray image intensifiers-Part 4:Determination of the image distortion
  • YY/T 0457.3-2003 Medical electrical equipment-Characteristics of electro-optical X-ray image intensifiers-Part 3:Determination of the luminance distribution and luminance non-uniformity
  • YY/T 0457.1-2003 Medical electrical equipment-Characteristics of electro-optical X-ray image intensifiers-Part 1:Determination of the entrance field size
  • YY/T 0457.5-2003 Medical electrical equipment-Characteristics of electro-optical X-ray image intensifiers-Part 5:Determination of the detective quantum efficiency
  • YY/T 0457.7-2003 Medical electrical equipment-Characteristics of electro-optical X-ray image intensifiers-Part 7:Determination of the modulation transfer function

Underwriters Laboratories (UL), The characteristics of photoelectric devices

  • UL 61496-2-2002 UL Standard for Safety Electro-Sensitive Protective Equipment, Part 2: Particular Requirements for Equipment Using Active Opto-Electronic Protective Devices (AOPDs) First Edition; Reprint with revisions through and including February 27, 2007

ECIA - Electronic Components Industry Association, The characteristics of photoelectric devices

  • EIA-364-81A-2005 TP-81A COMBUSTION CHARACTERISTICS TEST PROCEDURE FOR ELECTRICAL CONNECTOR HOUSINGS@ CONNECTOR ASSEMBLIES AND SOCKETS

European Association of Aerospace Industries, The characteristics of photoelectric devices

  • AECMA PREN 2591-223-2005 Aerospace series Elements of electrical and optical connection Test methods Part 223: Measurement of characteristic impedance of a coaxial connector or contact Edition P 1

VN-TCVN, The characteristics of photoelectric devices

  • TCVN 6990-2001 Methods of measurement of the suppression characteristic of passive radio interference filters and suppression components

IX-CISPR, The characteristics of photoelectric devices

  • CISPR 17-1981 Methods of measurement of the supression characteristics of passive radio interference filters and suppression components

IT-UNI, The characteristics of photoelectric devices

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., The characteristics of photoelectric devices

  • IEEE 1194.1-1991 Standard for Electrical Characteristics of Backplane Transceiver Logic (BTL) Interface Circuits (IEEE Computer Society Document)

European Telecommunications Standards Institute (ETSI), The characteristics of photoelectric devices

  • ETSI TR 102 555-2007 Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics of multiple gigabit wireless systems in the 60 GHz range System Reference Document
  • ETSI EN 301 925-2020 Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement (V1.6.1)

Aerospace, Security and Defence Industries Association of Europe (ASD), The characteristics of photoelectric devices

  • ASD-STAN PREN 2591-G7-1993 Aerospace Series Elements of Electrical and Optical Connection Test Methods Part G7 - Electrical Elements Measurement of Characteristic Impedance of a Bus or a Stub Terminator (Edition P 1)

TH-TISI, The characteristics of photoelectric devices

  • TIS 1442-1997 Electromagnetic disturbances: methods of measurement of the suppression characteristics of passive radio interference filters and suppression components

PL-PKN, The characteristics of photoelectric devices

  • PN C04616-09-1987 Water and waste water Special tests for sediments Determination of the specific nitrate reductases activity of the microorganisms occuring in the denitrifying reactors by the spectrophotometric method
  • PN-EN IEC 62024-2-2020-12 E High frequency inductive components -- Electrical characteristics and measuring methods -- Part 2: Rated current of inductors for DC-to-DC converters (IEC 62024-2:2020)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, The characteristics of photoelectric devices

  • PREN 2591-223-2005 Aerospace series Elements of electrical and optical connection Test methods Part 223: Measurement of characteristic impedance of a coaxial connector or contact (Edition P 1)

  The characteristics of photoelectric devices.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved