ZH
RU
ES

Multi-element trace analysis

Multi-element trace analysis, Total:498 items.

In the international standard classification, Multi-element trace analysis involves: Analytical chemistry, Non-ferrous metals, Testing of metals, General methods of tests and analysis for food products, Textile fibres, Industrial furnaces, Graphical symbols, Water quality, Fuels, Coals, Wastes, Animal feeding stuffs, Products of the textile industry, Vocabularies, Soil quality. Pedology, Corrosion of metals, Ceramics, Ferroalloys, Products of the chemical industry, Environmental protection, Nuclear energy engineering, Ferrous metals, Metalliferous minerals, Semiconducting materials, Geology. Meteorology. Hydrology, Non-metalliferous minerals, Farming and forestry, Construction materials, Lubricants, industrial oils and related products, Laboratory medicine, Waxes, bituminous materials and other petroleum products, Optics and optical measurements, Rubber, Manufacturing processes in the rubber and plastics industries, Fertilizers, Fruits. Vegetables, Spices and condiments. Food additives, Crude petroleum, Products of non-ferrous metals, Air quality, Petroleum products in general, Integrated circuits. Microelectronics.

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Multi-element trace analysis

GB/T 33236-2016 Polycrystalline silicon—Determination of trace elements—Glow discharge mass spectrometry method
GB/T 34701-2017 Microelement analysis method of regeneration DeNOx catalysts
GB/T 35818-2018 Standard method for analysis of forestry biomass－Determination of structural polysaccharides and lignin

工业和信息化部, Multi-element trace analysis

YS/T 1467.12-2021 Methods of chemical analysis of hafnium Part 12: Determination of trace impurity elements
YS/T 1347-2020 Chemical analysis method of high-purity hafnium Determination of trace impurity element content Glow discharge mass spectrometry
YS/T 1473-2021 Chemical analysis method of high purity molybdenum Determination of trace impurity elements Glow discharge mass spectrometry
YS/T 1288.4-2018 Methods for chemical analysis of high-purity zinc Part 4: Determination of trace element content Glow discharge mass spectrometry
XB/T 628-2020 Chemical Analysis Methods for High Purity Rare Earth Metals Determination of Trace Element Content Glow Discharge Mass Spectrometry
YS/T 474-2021 Chemical Analysis Methods for High Purity Gallium Determination of Trace Elements Inductively Coupled Plasma Mass Spectrometry
YS/T 870-2020 Chemical Analysis Methods for Pure Aluminum Determination of Trace Impurity Element Contents Inductively Coupled Plasma Mass Spectrometry
YS/T 1179.3-2017 Methods for chemical analysis of aluminum slag Part 3: Determination of carbon and nitrogen content Elemental analyzer method
YS/T 1033-2015 Determination of element content of dry anti-seepage materials by X-ray fluorescence spectrometry
XB/T 629.1-2020 Methods for chemical analysis of rare earth aluminum master alloys Part 1: Determination of amounts of rare earth elements
YS/T 1262-2018 Chemical analysis methods for titanium sponge, titanium and titanium alloys. Determination of multi-element content by inductively coupled plasma atomic emission spectrometry.
YS/T 1506-2021 Chemical analysis method of high-purity iridium Determination of impurity element content Glow discharge mass spectrometry
YS/T 1494-2021 Chemical analysis method for high purity gold Determination of impurity element content Glow discharge mass spectrometry
YS/T 1504-2021 High purity palladium chemical analysis method Determination of impurity element content Glow discharge mass spectrometry
YS/T 1530-2022 High purity tin chemical analysis method Determination of impurity element content Glow discharge mass spectrometry
YS/T 1495-2021 Chemical analysis method for high purity rhodium Determination of impurity element content Glow discharge mass spectrometry
YS/T 1493-2021 Chemical analysis method for high purity platinum Determination of impurity element content Glow discharge mass spectrometry
YS/T 1505-2021 Chemical analysis method of high purity ruthenium Determination of impurity element content Glow discharge mass spectrometry
YS/T 806-2020 Chemical analysis methods for aluminum and aluminum alloys Determination of elemental content X-ray fluorescence spectrometry
YS/T 575.23-2021 Methods of chemical analysis of bauxite ores Part 23: Determination of elemental content X-ray fluorescence spectrometry
YS/T 1445.1-2021 Methods for chemical analysis of nickel-cobalt-aluminum three-element composite hydroxides Part 1: Determination of nickel content Diacetyl oxime gravimetric method
YS/T 581.15-2012 Methods for chemical analysis and determination of physical properties of aluminum fluoride Part 15: Determination of elemental content by X-ray fluorescence spectrometry (tablet pressing) method
YS/T 1445.2-2021 Chemical analysis method for nickel-cobalt-aluminum three-element composite hydroxide Part 2: Determination of cobalt content by potentiometric titration method
YS/T 1261-2018 Hafnium Chemical Analysis Method Determination of Impurity Element Content Inductively Coupled Plasma Atomic Emission Spectrometry

Korean Agency for Technology and Standards (KATS), Multi-element trace analysis

KS D 1701-2004 Determination of trace impurities in high purity gold－Matrix extraction method by heating
KS D 1702-2015(2020) Platium－Determination of trace-element content by inductively coupled plasma spectrometric analysis－Matrix matching method
KS D 1702-2005 Platium-Determination of trace-element content by inductively coupled plasma spectrometric analysis-Matrix matching method
KS D ISO 2355:2002 Magnesium and its alloys－Determination of rare earths－Gravimetric method
KS I ISO 13878:2009 Soil quality－Determination of total nitrogen content by dry combustion(“elemental analysis”)
KS I ISO 13878-2009(2019) Soil quality－Determination of total nitrogen content by dry combustion(“elemental analysis”)
KS D ISO 11438-3:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 3:Determination of antimony content
KS D ISO 11438-5:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 5:Determination of tellurium content
KS D ISO 11438-7:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 7:Determination of silver content
KS D ISO 11438-2:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 2:Determination of lead content
KS D ISO 11438-4:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 4:Determination of tin content
KS D ISO 11438-6:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 6:Determination of thallium content
KS D ISO 11438-8:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 8:Determination of indium content
KS D ISO 11438-2:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 2：Determination of lead content
KS D ISO 11438-3:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 3：Determination of antimony content
KS D ISO 11438-4:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 4：Determination of tin content
KS D ISO 11438-5:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 5：Determination of tellurium content
KS D ISO 11438-6:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 6：Determination of thallium content
KS D ISO 11438-7:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 7：Determination of silver content
KS D ISO 11438-8:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 8：Determination of indium content
KS D ISO 3111-2002(2017) Copper alloys－Determination of tin as alloying element－Volumetric method
KS D ISO 3110-2002(2017) Copper alloys－Determination of aluminium as alloying element－Volumetric method
KS D ISO 11438-1:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 1:General requirement and sample dissolution
KS D ISO 11438-1:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 1：General requirement and sample dissolution
KS D ISO 11437-2:2012 Nickel alloys-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 2:Determination of lead content
KS D 1701-2009 Determination of trace impurities in high purity gold-Matrix extraction method by heating
KS D ISO 17973:2011 Surface chemical analysis－Medium-resolution Auger electron spectrometers－Calibration of energy scales for elemental analysis
KS D 1674-2019 Methods for inductively coupled plasma spectrometric analysis of trace elements in gold
KS I ISO 10694:2021 Soil quality — Determination of organic and total carbon after dry combustion(elementary analysis)
KS I ISO 10694-2005(2015) Soil quality－Determination of organic and total carbon after dry combustion(elementary analysis)
KS D ISO 22309:2011 Microbeam analysis-Quantitative analysis using energy-dispersive spectrometry(EDS)
KS D ISO 17974:2011 Surface chemical analysis－High-resolution Auger electron spectrometers－Calibration of energy scales for elemental and chemical-state analysis
KS D ISO 11437-1:2012 Nickel alloys-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 1:General requirements and sample dissolution
KS D 1702-2015 Platium－Determination of trace-element content by inductively coupled plasma spectrometric analysis－Matrix matching method

British Standards Institution (BSI), Multi-element trace analysis

BS EN 13805:2014 Foodstuffs. Determination of trace elements. Pressure digestion
BS EN 13805:2002 Foodstuffs - Determination of trace elements - Pressure digestion
BS ISO 5533:2023 Textiles. Quantification of carbon fibre constituent element. Elemental analyser method
BS EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis. Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
22/30448285 DC BS ISO 5533. Textiles. Quantification of carbon fibre constituent element. Elemental analyser method
BS EN 15205:2006 Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis
BS EN 17351:2020 Bio-based products. Determination of the oxygen content using an elemental analyser
BS ISO 24639:2022 Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
BS 6870-3:1989 Analysis of aluminium ores - Method for multi-element analysis by wavelength dispersive X-ray fluorescence
21/30404763 DC BS ISO 24639. Microbeam analysis. Analytical electron microscopy. Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
BS ISO 11938:2012 Microbeam analysis. Electron probe microanalysis. Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
19/30387008 DC BS EN 17351. Bio-based products. Determination of the oxygen content using an elemental analyser
BS EN 15517:2008 Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction
BS ISO 17973:2003 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
BS ISO 22309:2011 Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
BS EN 16785-1:2015 Bio-based products. Bio-based content. Determination of the bio-based content using the radiocarbon analysis and elemental analysis
BS EN 14082:2003 Foodstuffs - Determination of trace elements - Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after ash drying
BS ISO 17973:2016 Tracked Changes. Surface chemical analysis. Medium-resolution Auger electron spectrometers. Calibration of energy scales for elemental analysis
BS EN 14627:2005 Foodstuffs - Determination of trace elements - Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion
23/30472844 DC BS EN 13806-3. Foodstuffs. Determination of trace elements - Part 3. Determination of total mercury in foodstuffs with atomic absorption directly from the foodstuff (elemental mercury analysis)
BS EN 12938:2000 Methods for the analysis of pewter. Determination of alloying and impurity element contents by atomic spectrometry
BS EN 12938:2000(2001) Methods for the analysis of pewter. Determination of alloying and impurity element contents by atomic spectrometry
BS ISO 14869-2:2002 Soil quality - Dissolution for the determination of total element content - Dissolution by alkaline fusion
BS 6200-3.40.3:1997 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of copper c...
BS 6200-3.40.2:1997 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of nickel c...
BS 6200-3.40.4:1997 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of cobalt c...
BS ISO 17974:2002 Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis
BS 1016-106.4.2:1996 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of total sulfur content. High temperature combustion method
BS 7755-3.8:1995 Soil quality. Chemical methods. Determination of organic and total carbon after dry combustion (elementary analysis)
BS 1016-106.1.1:1996 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of carbon and hydrogen content. High temperature combustion method
BS EN 15111:2007 Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry)
BS 3907-8:1970 Methods for the analysis of magnesium and magnesium alloys - Determination of total rare earths in magnesium alloys (gravimetric method)
BS 6200-3.40.1:1997 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods. Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. General requirements and ...
BS EN 15763:2009 Foodstuffs - Determination of trace elements - Determination of arsenic, cadmium, mercury and lead in foodstuffs by inductively coupled plasma mass spectrometry (ICPMS) after pressure digestion
BS EN 15763:2010 Foodstuffs. Determination of trace elements. Determination of arsenic, cadmium, mercury and lead in foodstuffs by inductively coupled plasma mass spectrometry (ICPMS) after pressure digestion
DD CEN/TS 15506:2007 Foodstuffs — Determination of trace elements — Determination of tin in fruit and vegetables preserved in cans by flame atomic absorption spectrometry (AAS)
BS EN 13615:2001(2002) Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
BS 3907-10:1969 Methods for the analysis of magnesium and magnesium alloys - Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and/or silver (photometric method)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Multi-element trace analysis

GB/T 42518-2023 Chemical Analysis of Trace Elements in Bismuth Germanate (BGO) Crystals by Glow Discharge Mass Spectrometry
GB/T 37211.3-2022 Method for chemical analysis of metal germanium—Part 3: Determination of trace impurity elements content—Glow discharge mass spectrometry
GB/T 29858-2013 Standard guidelines for molecular spectroscopy multivariate calibration quantitative analysis
GB/T 13747.27-2020 Methods for chemical analysis of zirconium and zirconium alloys—Part 27：Determination of trace impurities content—Inductively coupled plasma mass spectrometry
GB/T 20127.7-2006 Steel and alloy - Determination of trace element contents - Part 7: Determination of lead content by oscillopolarographic method
GB/T 42274-2022 Determination of the content and distribution of trace elements (magnesium, gallium) in aluminum nitride materials—Secondary ion mass spectrometry
GB/T 21834-2008 Medium and low alloy steel-Determination of the distribution of multi-element contents-Original position statistic distribution analysis method
GB/T 20127.5-2006 Steel and alloy - Determination of trace element contents - Part 5: Determination of gallium content by extraction separation-rhodamine B photometric method
GB/T 20127.6-2006 Steel and alloy - Determination of trace element contents - Part 6: Determination of germanium content by gallic acid oscillopolarographic method
GB/T 20127.12-2006 Steel and alloy.Determiantion of trace element contents.Part 12:Determination of zinc content by flame atomic absorption spectrometric method
GB/T 32651-2016 Test method for measuring trace elements in photovoltaic-grade silicon by high-mass resolution glow discharge mass spectrometry
GB/T 29732-2013 Surface chemical analysis.Medium resolution Auger electron spectrometers.Calibration of energy scales for elemental analysis
GB/T 20127.1-2006 Steel and alloy - Determination of trace element contents - Part 1: Determination of silver content by graphite furnace atomic absorption spectrometric method
GB/T 20127.4-2006 Steel and alloy.Determination of trace element contents.Part 4:Determination of copper content by graphite furnace atomic absorption spectrometric method
GB/T 14506.30-2010 Methods for chemical analysis of silicate rocks.Part 30:Determination of 44 elements
GB/T 20127.2-2006 Steel and alloy - Determination of trace element contents - Part 2: Determination of arsenic content by hydride generation-atomic fluorescence spectrometric method
GB/T 20127.8-2006 Steel and alloy - Determination of trace element contents - Part 8: Determination of antimony content by hydride generation-atomic fluorescence spectrometric method
GB/T 20127.10-2006 Steel and alloy.Determination of trace element contents.Part 10: Determination of selenium content by hydride generation-atomic fluorescence spectrometric method
GB/T 13748.20-2009 Chemical analysis methods of magnesium and magnesium alloys.Part 20:Determination of elements by inductively coupled plasma atomic emission spectrometry
GB/T 29731-2013 Surface chemical analysis.High-resolution Auger electron spectrometers.Calibration of energy scales for elemental and chemical-state analysis
GB/T 20127.9-2006 Steel and alloy - Determination of trace element contents - Part 9: Determination of scandium content by inductively coupled plasma atomic emission spectrometric method
GB/T 20127.11-2006 Steel and alloy - Determination of trace element contents - Part 11: Determination of indium and thallium contents by inductively coupled plasma-mass spectrometric method
GB/T 20127.13-2006 Steel and alloy - Determination of trace element contents - Part 13: Determination of tin content by iodide extraction-phenylfluorone photometric method
GB/T 14506.29-2010 Methods for chemical analysis of silicate rocks-Part 29: Determination of 22 elements including rare earth elements
GB/T 36590-2018(英文版) Method for chemical analysis of high purity silver—Determination of trace impurity elements contents—Glow discharge mass spectrometry
GB/T 20127.3-2006 Steel and alloy - Determination of trace element contents - Part 3: Determination of calcium, magnesium, barium content by inductively coupled plasma atomic emission spectrometric method
GB/T 13748.21-2009 Chemical analysis methods of magnesium and magnesium alloys.Part 21:Determination of elements by photoelectric direct reading atomic emission spectrometry
GB/T 14849.5-2010 Chemical analysis of slion metal.Part 5: Determination of elements content.Analysis using an X-ray fluorescence method
GB/T 14506.28-1993 Silicate rocks. Determination of contents of major and minor elements. X-ray fluorescence spectrometric method
GB/T 25934.3-2010 Methods for chemical analysis of high purity gold.Part 3:Ethylether extraction separation-inductively coupled plasma-atomic emission spectrometry.Determination of impurity elements contents
GB/T 14849.5-2014 Methods for chemical analysis of silicon metal.Part 5:Determination of impurity contents.X-ray fluorescence method
GB/T 6987.24-2001 Aluminium and aluminium alloys--Determination of the cerium subgroup of rare earth elements content--Tribromoarsenazo spectrophotometric method
GB/T 25934.1-2010 Methods for chemical analysis of high purity gold.Part 1: Ethyl acetate extraction separation-inductively coupled plasma-atomic emission spectrometry.Determination of impurity elements contents
GB/T 25934.2-2010 Methods for chemical analysis of high purity gold.Part 2: Inductively coupled plasma mass spectrometry standard enter emendation-inner standard method.Determination of impurity elements contents
GB/T 6609.30-2009 Chemical analysis methods and determination of physical performance of alumina.Part 30:X-ray fluorescence spectrometric method for the determination content of trace elements
GB/T 14849.4-2008 Methods for chemical analysis of silicon metal.Part 4: Determination of elements content.Inductively coupled plasma atomic emission specrometric method

Association Francaise de Normalisation, Multi-element trace analysis

NF V03-081:2002 Foodstuffs - Determination of trace elements - Pressure digestion.
NF V03-081*NF EN 13805:2014 Foodstuffs - Determination of trace elements - Pressure digestion
NF X21-004*NF ISO 22309:2012 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above.
NF V18-247*NF EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
NF ISO 22309:2012 Analyse par microfaisceaux - Analyse élémentaire quantitative par spectrométrie à sélection d'énergie (EDS) des éléments ayant un numéro atomique de 11 (Na) ou plus
NF X31-418*NF ISO 13878:1998 Soil quality. Determination of total nitrogen content by dry combustion ("elemental analysis").
NF EN 17053:2018 Aliments des animaux - Méthodes d'échantillonnage et d'analyse - Dosage par ICP-MS (multiméthode) des éléments traces, métaux lourds et autres éléments inorganiques présents dans les aliments
NF ISO 13878:1998 Qualité du sol - Détermination de la teneur totale en azote par combustion sèche ("analyse élémentaire")
NF X85-011*NF EN 17351:2020 Bio-based products - Determination of the oxygen content using an elemental analyser
NF EN 17351:2020 Produits biosourcés - Détermination de la teneur en oxygène à l'aide d'un analyseur élémentaire
NF A06-902*NF EN 12938:2000 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry.
NF ISO 17973:2006 Analyse chimique des surfaces - Spectromètres d'électrons Auger à résolution moyenne - Étalonnage des échelles d'énergie pour l'analyse élémentaire
NF ISO 10694:1995 Qualité du sol - Dosage du carbone organique et du carbone total après combustion sèche (analyse élémentaire)
NF V37-064*NF EN 15517:2008 Foodstuffs - Determination of trace elements - Determination of inorganic arsenic in seaweed by hydride generation atomic absorption spectrometry (HGAAS) after acid extraction.
NF X21-054*NF ISO 17973:2006 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis.
NF X21-013*NF ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy.
NF X85-008-1*NF EN 16785-1:2016 Bio-based products - Bio-based content - Part 1 : determination of the bio-based content using the radiocarbon analysis and elemental analysis
NF EN 16785-1:2016 Produits biosourcés - Teneur biosourcée - Partie 1 : détermination de la teneur biosourcée par une analyse au radiocarbone et une analyse élémentaire
NF X31-409*NF ISO 10694:1995 Soil quality. Determination of organic and total carbon after dry combustion (elementary analysis).
NF EN ISO 21392:2021 Cosmétiques - Méthodes d'analyse - Mesurage des éléments traces métalliques par ICP-MS dans les produits cosmétiques finis
NF G06-032:1978 Textiles. Quantitative analyse of binary mixtures of cellulose fibers and asbestos.
NF V03-095*NF EN 14627:2005 Foodstuffs - Determination of trace elements - Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion.
NF G06-017:1975 Quantitative chemical analysis of ternary mixtures of cotton, regenerated cellulose and protein substances.
NF ISO 17974:2009 Analyse chimique des surfaces - Spectromètres d'électrons Auger à haute résolution - Étalonnage des échelles d'énergie pour l'analyse élémentaire et de l'état chimique
NF T46-055:1990 Vulcanized or thermoplastic rubber. Analysis of the multipeak traces obtained when determining the adhesive strength and the tear strength.
NF X21-067*NF ISO 17974:2009 Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis.
NF G06-034:1979 Textiles. Quantitative chemical analysis of binary mixtures of regenerated cellulose fibres and cotton.
NF V32-082*NF ISO 13685:1997 Ginger and ginger oleoresins. Determination of the main pungent components (gingerols and shogaols). Method using high-performance liquid chromatography.
NF A06-903*NF EN 13615:2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry.
FD ISO/TR 22281:2018 Produits consommables pour le soudage - Position de l'Institut international de la soudure (IIW) sur l'utilisation d'analyses d'éléments-trace lors de la spécification de consommables

International Organization for Standardization (ISO), Multi-element trace analysis

ISO/DIS 5533 Textiles — Quantification of carbon fibre constituent element — Elemental analyser method
ISO/FDIS 5533:2023 Textiles — Quantification of carbon fibre constituent element — Elemental analyser method
ISO 5533:2023 Textiles — Quantification of carbon fibre constituent element — Elemental analyser method
ISO 11438-6:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 6: determination of thallium content
ISO 11438-7:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 7: determination of silver content
ISO 11438-8:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 8: determination of indium content
ISO 11438-2:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 2: determination of lead content
ISO 11438-4:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 4: determination of tin content
ISO 11438-5:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 5: determination of tellurium content
ISO 11438-3:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 3: determination of antimony content
ISO 11438-1:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 1: general requirements and sample dissolution
ISO 11437-2:1994 Nickel alloys - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Part 2: Determination of lead content
ISO 11938:2012 Microbeam analysis - Electron probe microanalysis - Methods for elemental-mapping analysis using wavelength-dispersive spectroscopy
ISO/CD 17973 Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibration of energy scales for elemental analysis
ISO 24639:2022 Microbeam analysis — Analytical electron microscopy — Calibration procedure of energy scale for elemental analysis by electron energy loss spectroscopy
ISO 17973:2016 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
ISO 17973:2002 Surface chemical analysis - Medium-resolution Auger electron spectrometers - Calibration of energy scales for elemental analysis
ISO 11437-1:1994 Nickel alloys - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Part 1: General requirements and sample dissolution
ISO 22309:2011 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above
ISO 10694:1995 Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis)
ISO 17974:2002 Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis

Professional Standard - Non-ferrous Metal, Multi-element trace analysis

YS/T 917-2013 Chemical analysis methods for high purity cadmium.Determination of trace impurity elements content.Glow discharge mass spectrometry
YS/T 922-2013 Methods for chemical analysis of high purity copper.Determination of trace impurity elements content.Glow discharge mass spectrometry
YS/T 1599-2023 Method for chemical analysis of high purity zirconium一 Determination of trace impurity elements content一 Glow discharge mass spectrometry
YS/T 871-2013 Chemical analysis of high purity aluminium.Determination of trace impurities.Glow discharge mass spectrometry
YS/T 895-2013 Methods for chemical analysis of high purity rhenium.Determination of trace impurity element content.Glow discharge mass spectrometry
YS/T 897-2013 Methods for chemical analysis of high purity niobium.Determination of trace impurity element content.Glow discharge mass spectrometry
YS/T 891-2013 Methods for chemical analysis of high purity titanium.Determination of trace impurity element content.Glow discharge mass spectrometry
YS/T 899-2013 Methods for chemical analysis of high purity tantalum.Determination of trace impurity element content.Glow discharge mass spectrometry
YS/T 901-2013 Methods for chemical analysis of high purity tungsten.Determination of trace impurity element content.Glow discharge mass spectrometry
YS/T 229.4-2013 Chemical analysis methods for high purity lead.Part 4:Determination of trace impurity elements content.Glow discharge mass spectrometry
YS/T 923.2-2013 Methods for chemical analysis of high purity bismuth.Part 2:Determination of trace impurity elements content.Glow discharge mass spectrometry
YS/T 38.3-2023 Methods for chemical analysis of high purity gallium—Part 3：Determination of trace impurity elements contents—Glow discharge mass spectrometry
YS/T 474-2005 Determination of trace elements in high-purity gallium -ICP-MS analytical method
YS/T 870-2013 Chemical analysis of high purity aluminium.Determination of trace impurities.Inductively coupled plasma mass spectrometry
YS/T 896-2013 Methods for chemical analysis of high purity niobium.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
YS/T 892-2013 Methods for chemical analysis of high purity titanium.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
YS/T 898-2013 Methods for chemical analysis of the high purity tantalum.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
YS/T 900-2013 Methods for chemical analysis of the high purity tungsten.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
YS/T 372.4-2006 Methods for elementary analysis of precious alloy. Determination of copper content.Complexometric titration using thiourea releasing EDTA
YS/T 372.4-1994 Methods for elementary analysis of precious alloy. Determination of copper content.Complexometric titration using thiourea releasing EDTA
YS/T 372.3-2006 Methods for elementary analysis of precious alloy. Determination of palladoum content. Complexometric titration using butanedione dioxime releasing EDTA
YS/T 372.20-2006 Methods for elementary analysis of precious alloy. Determination of cadmium content. Complexometric titration using potassium iodide releasing EDTA
YS/T 372.3-1994 Methods for elementary analysis of precious alloy. Determination of palladoum content. Complexometric titration using butanedione dioxime releasing EDTA
YS/T 372.7-2006 Methods for elementary analysis of precious alloy. Determination of cobalt content. EDTA complexometric titration
YS/T 372.9-2006 Methods for elementary analysis of precious alloy. Determination of nickel content.EDTA complexometric titration
YS/T 372.11-2006 Methods for elementary analysis of precious alloy.Determination of magnesium content.EDTA complexometric titration
YS/T 372.12-2006 Methods for elementary analysis of precious alloy.Determination of zinc content.EDTA complexometric titration
YS/T 372.13-2006 Methods for elementary analysis of precious alloy. Determination of tin content. EDTA complexometric titration
YS/T 372.16-2006 Methods for elementary analysis of precious alloy. Determination of gallium content. EDTA complexomeric titration
YS/T 372.21-2006 Methods for elementary analysis of precious alloy. Determination of zirconium content. EDTA complexometric titration
YS/T 372.22-2006 Methods for elementary analysis of precious alloy. Determination of indium content. EDTA complexometric titration
YS/T 372.11-1994 Methods for elementary analysis of precious alloy.Determination of magnesium content.EDTA complexometric titration
YS/T 372.12-1994 Methods for elementary analysis of precious alloy.Determination of zinc content.EDTA complexometric titration
YS/T 372.13-1994 Methods for elementary analysis of precious alloy. Determination of tin content. EDTA complexometric titration
YS/T 372.7-1994 Methods for elementary analysis of precious alloy. Determination of cobalt content. EDTA complexometric titration
YS/T 63.16-2006 Carbonaceous materials used in the production of aluminium-Part 16:Analysis using an X-ray fluorescence method
YS/T 703-2014 Method for chemical analysis of Limstone.Determination of element contents.X-ray fluorescence spectrometric method
YS/T 372.1-2006 Methods for elementary analysis of precious alloy. Determination of silver content. Potentiometer titration with potassium iodide
YS/T 372.1-1994 Methods for elementary analysis of precious alloy. Determination of silver content. Potentiometer titration with potassium iodide
YS/T 372.18-2006 Methods for elementary analysis of precious alloy. Determination of gadolinium content. Chlorophosphonazo Ⅲ spectrophotometry
YS/T 372.19-2006 Methods for elementary analysis of precious alloy. Determination of yttrium content.Chlorophosphonazo Ⅲ spectrophotometry
YS/T 372.17-2006 Methods for elementary analysis of precious alloy. Determination of tungsten and rhenium content. Tungstic acid gravimetry and thiourea spectrophotometry
YS/T 1011-2014 Methods for chemical analysis of high purity cobalt.Determination of impurity elements content.Glow discharge mass spectrometry
YS/T 1012-2014 Methods for chemical analysis of high purity nickel.Determination of trace impurity elements content.Glow discharge mass spectrometry
YS/T 372.2-2006 Methods for elementary analysis of precious alloy. Determination of platinum content. Electricity titration using potassium permanganate
YS/T 372.15-2006 Methods for elementary analysis of precious alloy. Determination of antimony content. The flame atomic absorption spectrometric method
YS/T 372.14-2006 Methods for elementary analysis of precious alloy. Determination of manganese content. Potentiometer titration using potassium permanganate
YS/T 372.14-1994 Methods for elementary analysis of precious alloy. Determination of manganese content. Potentiometer titration using potassium permanganate
YS/T 372.2-1994 Methods for elementary analysis of precious alloy. Determination of platinum content. Electricity titration using potassium permanganate
YS/T 575.23-2009 Method for chemical analysis of aluminum ores.Part 23:Determination of element contents X-ray fluorescence spectrometric method
YS/T 372.5-2006 Methods for elementary analysis of precious alloy. Determination of copper content in PtCu alloy. EDTA complexometric titration
YS/T 372.6-2006 Methods for elementary analysis of precious alloy. Determination of copper content and manganese contents. The flame atomic absorption spectrometric method
YS/T 372.8-2006 Methods for elementary analysis of precious alloy. Determination of cobalt content in PtCo alloy. EDTA complexometric titration
YS/T 372.5-1994 Methods for elementary analysis of precious alloy. Determination of copper content in PtCu alloy. EDTA complexometric titration
YS/T 372.6-1994 Methods for elementary analysis of precious alloy. Determination of copper content and manganese contents. The flame atomic absorption spectrometric method
YS/T 928.2-2013 Methods for chemical analysis of nickel cobalt manganese composite hydrogenoxide.Part 2:Determination of nickel contents.Dimethylglyoxime gravimetric
YS/T 63.16-2019 Test method for carbonaceous materials used in the production of aluminium——Part 16: Determination of element contents——Wavelength dispersive X-ray fluorescence spectrometric method
YS/T 273.14-2008 Chemical analysis methods and determination of physical performance of synthetic cryolite.Part 14: X-ray fluorescence spectrometric method for the determination of elements content
YS/T 581.16-2008 Chemical analysis methods and determination of physical performance of industrial aluminium fluoride.Part 16: X-ray fluorescence spectrometric method for the determination of elements content
YS/T 372.10-2006 Methods for elementary analysis of precious alloy. Determination of nickel content in AuNi and PdNi alloy. EDTA complexometric titration
YS/T 372.10-1994 Methods for elementary analysis of precious alloy. Determination of nickel content in AuNi and PdNi alloy. EDTA complexometric titration
YS/T 581.18-2012 Chemical analysis methods and physical properties of Aluminum Fluoride.Part 18:X-ray fluorescence spectrometric method for the determination of elements content using pressed powder tablets
YS/T 273.15-2012 Chemical analysis methods and physical properties of cryolite.Part 15:X-ray fluorescence spectrometric method for the determination of elements content using pressed powder tablets
YS/T 928.1-2013 Methods for chemical analysis of nickel cobalt manganese composite hydrogenoxide.Part 1:Determination of chloride ion contents.Silver chloride turbidimetry
YS/T 928.6-2013 Methods for chemical analysis of nickel cobalt manganese composite hydroxide.Part 6:Determination of sulfate ion contents.Ion chromatography

American Society for Testing and Materials (ASTM), Multi-element trace analysis

ASTM D5513-99 Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis
ASTM D5513-99(2004) Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis
ASTM D5738-95(2006) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace ElementsDiagrams for Single Analyses
ASTM D5839-96(2001) Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM D5839-96(2006) Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM D5513-15 Standard Practice for Microwave Digestion of Industrial Furnace Feed Streams and Waste for Trace Element Analysis
ASTM E1655-00 Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM E1655-17 Standard Practices for Infrared Multivariate Quantitative Analysis
ASTM D5877-95(2005) Standard Guide for Displaying Results of Chemical Analyses of Groundwater for Major Ions and Trace ElementsDiagrams Based on Data Analytical Calculations
ASTM D5839-96 Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM D6036-96e1 Standard Guide for Displaying the Results of Chemical Analysis of Ground Water for Major Ions and Trace Elements-Use of Maps
ASTM D6036-96(2002) Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements8212;Use of Maps
ASTM D6036-96(2008) Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elementsx2014;Use of Maps
ASTM D5513-99(2009) Standard Practice for Microwave Digestion of Industrial Furnace Feedstreams and Waste for Trace Element Analysis
ASTM D5513-22 Standard Practice for Microwave Digestion of Industrial Furnace Feed Streams and Waste for Trace Element Analysis
ASTM D3683-04 Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption
ASTM D5754-95(2000) Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements-Trilinear Diagrams for Two or More Analyses
ASTM D5754-95(2006) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace ElementsTrilinear Diagrams for Two or More Analyses
ASTM D3919-04 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
ASTM D3919-99 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
ASTM C1234-98 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
ASTM C1234-98(2004) Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
ASTM C1234-11 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations
ASTM D5738-95(2000) Standard Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements-Diagrams for Single Analyses
ASTM D8469-22 Standard Test Method for Analysis of Multiple Elements in Cannabis Matrices by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ASTM D846-84 Standard Test Method for Analysis of Multiple Elements in Cannabis Matrices by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
ASTM D6247-98(2004) Standard Test Method for Analysis of Elemental Content in Polyolefins By X-Ray Fluorescence Spectrometry
ASTM D6247-98 Standard Test Method for Analysis of Elemental Content in Polyolefins By X-Ray Fluorescence Spectrometry
ASTM D5877-95(2000) Standard Guide for Displaying Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements-Diagrams Based on Data Analytical Calculations
ASTM D7111-11 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7111-14 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry 40;ICP-AES41;
ASTM D7754-11 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
ASTM D5839-15 Standard Test Method for Trace Element Analysis of Hazardous Waste Fuel by Energy-Dispersive X-Ray Fluorescence Spectrometry
ASTM D6247-10 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry
ASTM D7691-23 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7691-11e1 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry 40;ICP-AES41;
ASTM D7691-16 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
ASTM D7751-11 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis
ASTM D8064-16 Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
ASTM D6052-97(2016) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6052-97 Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6052-97(2003) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6052-97(2008) Standard Test Method for Preparation and Elemental Analysis of Liquid Hazardous Waste by Energy-Dispersive X-Ray Fluorescence
ASTM D6036-96(2014) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Use of Maps

国家市场监督管理总局、中国国家标准化管理委员会, Multi-element trace analysis

GB/T 36590-2018 Method for chemical analysis of high purity silver—Determination of trace impurity elements contents—Glow discharge mass spectrometry
GB/T 38904-2020 Methods for elemental analysis of ceramic liquid pigments
GB/T 38939-2020 Nickel-based alloy—Determination of multi-element contents—Spark discharge atomic emission spectrometric method(routine method)
GB/T 29732-2021 Surface chemical analysis—Medium resolution auger electron spectrometers—Calibration of energy scales for elemental analysis
GB/T 39527-2020 Determination of calcium, aluminium and silicon in the solid surface materials—Method of chemical analysis
GB/T 37160-2019 Standard test method for determination of trace metals in heavy distillate,residual oil and crude oil—Inductively coupled plasma optical emission spectrometry（ICP-OES）

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Multi-element trace analysis

GJB 5404.3-2005 Analysis methods for trace elements in super alloys Part 3: Determination of calcium conten by flame atomic absorption spectrometric method
GJB 5404.5-2005 Analysis methods for trace elements in super alloys Part 5: Determination of copper content by flame atomic absorption spectrometric method
GJB 5404.8-2005 Analysis methods for trace elements in super alloys Part 8: Determination of magnesium content by flame atomic absorption spectrometric method
GJB 5404.6-2005 Analysis methods for trace elements in super alloys Part 6: Determination of gallium content by graphite furnace atomic absorption spectrometric method
GJB 5404.10-2005 Analysis methods for trace elements in super alloys Part 10: Determination of selenium content by graphite furnace atomic absorption spectrometric method
GJB 5404.2-2005 Analysis methods for trace elements in super alloys. Part 2: Determination of bismuth content by hydride generation-atomic fluorescence spectrometric method
GJB 5404.9-2005 Analysis methods for trace elements in super alloys Part 9: Determination of antimony content by hydride generation atomic fluorescence spectrometric method
GJB 5404.12-2005 Analysis methods for trace elements in super alloys Part 12: Determination of tellurium content by hydride generation atomic fluorescence spectrometric method
GJB 5404.1-2005 Analysis methods for trace elements in super alloys Part 1: Determination of silver content by dithizone tetrachloromethane extraction-spectrophotometric method
GJB 5404.4-2005 Analysis methods for trace elements in super alloys Part 4: Determination of cadium content by methyl isobutyl ketone extraction atomic fluorescence spectrometric method
GJB 5404.11-2005 Analysis methods for trace elements in super alloys Part 11: Determination of tin content byeryllium hydroxide coprecipitation phenyl fluorone spectrophotometric method
GJB 5404.7-2005 Analysis methods for trace elements in super alloys Part 7: Determination of indium content by benzene extraction crystal violet spectrophotometric method after separation of butyl acetate extraction
GJB 5404.17-2005 Analysis methods for trace elements in super alloys - Part 17: Determination of arsenic, silver, tin, antimony, tellurium, thallium, lead and bismuth contents by hollow-cathode spectrometric method (Routine method)
GJB 5404.14-2005 Analysis methods for trace elements in super alloys Part 14: Determination of cadmium,indium content by methyl isobutyl ketone extraction-graphite furnace atomic absorption spectrometric method
GJB 5404.13-2005 Analysis methods for trace elements in super alloys. Part 13: Determination of thallium content by isoamyl acetate extraction crystal violet spectrophotometric method after separation of methyl isobutyl ketone extraction
GJB 5404.16-2005 Analysis methods for trace elements in super alloys - Part 16: Determination of boron, scandium, gallium, silver, indium, tin, antimony, cerium, hafnium, thallium, lead and bismuth contents by inductively coupled plasma-mass spectrometric method
GJB 5404.15-2005 Analysis methods for trace elements in super alloys - Part 15: Determination of arsenic, tin, antimony, tellurium, thallium, lead, bismuth contents by methyl isobutyl ketone extraction-graphite furnace atomic absorption spectrometric method

Military Standard of the People's Republic of China-General Armament Department, Multi-element trace analysis

GJB 8781.3-2015 Methods for trace element analysis of superalloys Part 3: Determination of calcium content by flame atomic absorption spectrometry
GJB 8781.5-2015 Methods for trace element analysis of high temperature alloys Part 5: Determination of copper content by flame atomic absorption spectrometry
GJB 8781.8-2015 Methods for trace element analysis of high temperature alloys Part 8: Determination of magnesium content by flame atomic absorption spectrometry
GJB 8781.10-2015 Methods for trace element analysis of high temperature alloys Part 10: Determination of selenium content by graphite furnace atomic absorption spectrometry
GJB 8781.6-2015 Methods for trace element analysis of high temperature alloys Part 6: Determination of gallium content by graphite furnace atomic absorption spectrometry
GJB 8781.9-2015 Methods for trace element analysis of high-temperature alloys Part 9: Determination of antimony content by hydride generation-atomic fluorescence spectrometry
GJB 8781.12-2015 Methods for trace element analysis of high-temperature alloys Part 12: Determination of tellurium content by hydride generation-atomic fluorescence spectrometry
GJB 8781.2-2015 Methods for trace element analysis of high-temperature alloys Part 2: Determination of bismuth content by hydride generation-atomic fluorescence spectrometry
GJB 8781.1-2015 Methods for trace element analysis of high-temperature alloys Part 1: Dithizone carbon tetrachloride extraction-spectrophotometric determination of silver content
GJB 8781.4-2015 High temperature alloy trace element analysis method Part 4: Extraction and separation of methyl isobutyl ketone - Determination of cadmium content by atomic fluorescence spectrometry
GJB 8781.11-2015 Methods for trace element analysis of high-temperature alloys Part 11: Determination of tin content by beryllium hydroxide carrier precipitation-phenylfluorone spectrophotometric method
GJB 8781.7-2015 High temperature alloy trace element analysis method Part 7: Butyl acetate extraction and separation-benzene extraction crystal violet spectrophotometry for determination of indium content
GJB 8781.17-2015 Methods for trace element analysis of superalloys Part 17: Determination of arsenic, silver, tin, antimony, tellurium, thallium, lead and bismuth by hollow cathode spectroscopy (conventional method)
GJB 8781.14-2015 High temperature alloy trace element analysis method Part 14: Extraction and separation of methyl isobutyl ketone - Determination of cadmium and indium content by graphite furnace atomic absorption spectrometry
GJB 8781.13-2015 High temperature alloy trace element analysis method Part 13: Methyl isobutyl ketone extraction and separation-isoamyl acetate extraction crystal violet spectrophotometric method for determination of thallium content
GJB 8781.16-2015 Methods for trace element analysis of superalloys Part 16: Determination of boron, scandium, gallium, silver, indium, tin, antimony, cerium, hafnium, thallium, lead and bismuth by inductively coupled plasma-mass spectrometry
GJB 8781.15-2015 High temperature alloy trace element analysis method Part 15: Extraction and separation of methyl isobutyl ketone - Determination of arsenic, tin, antimony, tellurium, thallium, lead and bismuth content by graphite furnace atomic absorption spectrometry
GJB 770.201-1989 Test methods for gunpowder analysis Determination of metal element content Atomic absorption spectrometry
GJB 950.8-1990 Trace element analysis method of precious metals and their alloys ICP-AES method for determination of trace amounts of palladium and rhodium in platinum alloys
GJB 950.1-1990 Analysis method of trace elements of precious metals and their alloys ICP-AES method Determination of trace amounts of lead, antimony, bismuth and iron in gold and gold alloys
GJB 950.5-1990 Analysis method of trace elements of precious metals and their alloys. Determination of trace iron in palladium alloys by sulfosalic acid photometric method.
GJB 950.2-1990 Analysis method of trace elements of precious metals and their alloys ICP-AES method Determination of trace amounts of iron, lead, antimony and bismuth in silver and silver alloys
GJB 950.5A-2021 Methods for analysis of trace elements of precious metals and their alloys Part 5: Determination of trace iron in palladium alloys by sulfosalicylic acid photometric method
GJB 950.6-1990 Analysis method of trace elements of precious metals and their alloys Separation of phenanthroline by hydrazine sulfate Photometric method for determination of trace iron in palladium alloys
GJB 950.6A-2021 Analysis methods for trace elements of precious metals and their alloys Part 6: Photometric determination of trace iron in palladium alloys by separation of phenanthroline using hydrazine sulfate
GJB 950.7-1990 Analysis method of trace elements of precious metals and their alloys. Determination of trace amounts of lead, antimony and bismuth in palladium alloys by graphite furnace atomic absorption spectrometry.

German Institute for Standardization, Multi-element trace analysis

DIN 22022-2:2001 Solid fuels - Determination of contents of trace elements - Part 2: ICP-OES
DIN 22022-7:2014 Solid fuels - Determination of contents of trace elements - Part 7: ICP-MS
DIN 22022-3:2001 Solid fuels - Determination of trace elements - Part 3: AAS-flame method
DIN EN 17053:2018 Animal feeding stuffs - Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
DIN EN 17053:2018-03 Animal feeding stuffs - Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method); German version EN 17053:2018
DIN 22022-6:2001 Testing of solid fuels - Determination of trace elements - Part 6: Evaluation and declaration of results
DIN 22022-1:2014 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN 22022-1:2001 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation; Preparation of samples for the analyses (dissolution method)
DIN ISO 13878:1998 Soil quality - Determination of total nitrogen content by dry combustion ("elemental analysis") (ISO 13878:1998)
DIN 50508:1977 Chemical analysis of copper and copper alloys; determination of tin as alloying element, volumetric method
DIN EN 17351:2020 Bio-based products - Determination of the oxygen content using an elemental analyser
DIN EN 17351:2020-04 Bio-based products - Determination of the oxygen content using an elemental analyser; German version EN 17351:2020
DIN ISO 10694:1996 Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis) (ISO 10694:1995)
DIN 50451-3:2014-11 Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 3: Determination of 31 elements in high-purity nitric acid by ICP-MS
DIN 50451-7:2018-04 Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 7: Determination of 31 elements in high-purity hydrochloric acid by ICP-MS
DIN EN 12938:2000-10 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry (includes AC:2000); German version EN 12938:1999 + AC:2000
DIN 22022-6:2001-12 Testing of solid fuels - Determination of trace elements - Part 6: Evaluation and declaration of results
DIN 50451-6:2014-11 Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 6: Determination of 36 elements in a high-purity ammonium fluoride solution (NH<(Index)4>F) and in etching mixtures of high-purity ammonium ...
DIN 51733:2016 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
DIN 51733:2008 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
DIN 22022-5:2001 Solid fuels - Determination of trace elements - Part 5: Atomic absorption spectrometry applying the electrothermal atomization
DIN 50508:1977-06 Chemical analysis of copper and copper alloys; determination of tin as alloying element, volumetric method
DIN EN 16785-1:2016 Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis
DIN EN 16785-1:2016-03 Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis; German version EN 16785-1:2015
DIN ISO 22309:2015-11 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above (ISO 22309:2011)
DIN EN 13806-3:2023-07 Foodstuffs - Determination of trace elements - Part 3: Determination of total mercury in foodstuffs with atomic absorption directly from the foodstuff (elemental mercury analysis); German and English version prEN 13806-3:2023 / Note: Date of issue 2023...
DIN 50451-5:2010 Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 5: Guideline for the selection of materials and testing of their suitability for apparatus for sampling and sample preparation for the determination of t
DIN 50451-4:2007-02 Testing of materials for semiconductor technology - Determination of trace elements in liquids - Part 4: Determination of 34 elements in ultra pure water by mass spectrometry with inductively coupled plasma (ICP-MS)
DIN 50451-3:2014 Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 3: Determination of 31 elements in high-purity nitric acid by ICP-MS
DIN ISO 22309:2015 Microbeam analysis - Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above (ISO 22309:2011)
DIN 22022-4:2001 Solid fuels - Determination of contents of trace elements - Part 4: Atomic absorption spectrometry applying the flameless hydride system or the cold-vapour-method
DIN 51429-1:2000 Testing of petroleum products - Determination of selected trace elements - Part 1: Atomic absorption spectrometry after specific incineration and digestion methods
DIN 51391-2:1994-03 Testing of lubricants; determination of the content of additive elements; analysis by wavelengthdispersive X-ray spectrometry (XRS)
DIN 51456:2013-10 Testing of materials for semiconductor technology - Surface analysis of silicon wafers by multielement determination in aqueous analysis solutions using mass spectrometry with inductively coupled plasma (ICP-MS)
DIN 50451-6:2014 Testing of materials for semiconductor technology - Determination of traces of elements in liquids - Part 6: Determination of 36 elements in a high-purity ammonium fluoride solution (NH4F) and in etching mixtures of high-purity ammonium fluoride solution
DIN 22022-1:2014-07 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN 54210:1975 Testing of textiles; quantitative analysis of binary mixtures, acetate fibres with other fibres, acetone method
DIN EN 13615:2002-04 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry; German version EN 13615:2001
DIN 51456:2013 Testing of materials for semiconductor technology - Surface analysis of silicon wafers by multielement determination in aqueous analysis solutions using mass spectrometry with inductively coupled plasma (ICP-MS)

Standard Association of Australia （SAA）, Multi-element trace analysis

AS 1038.10.5.1:2003 Coal and coke - Analysis and testing - Coal, coke and fly-ash - Trace elements - Determination of mercury content - Tube combustion method
AS 1038.10.3:1998 Coal and coke - Analysis and testing - Determination of trace elements - Coal and coke - Determination of boron content - ICP-AES method
AS 1038.10.5.2:2007 Coal and coke - Analysis and testing - Coal and fly-ash - Trace elements - Determination of mercury content - Acid extraction method
AS 1038.10.0:2002(R2013)
AS 1038.10.2:1998 Coal and coke - Analysis and testing - Determination of trace elements - Coal and coke - Determination of arsenic, antimony and selenium - Hydride generation method
AS 2879.7:1997 Alumina - Determination of trace elements - Wavelength dispersive X-ray fluorescence spectrometric method
AS 1038.14.2:1995 Coal and coke - Analysis and testing part 14.2:Higher rank coal ash and coke ash - Major and minor elements - Acid digestion/flame atomic absorption spectrometric method
AS 1038.14.3:1999(R2013)
AS 1038.14.2:2003(R2013)
AS 1038.14.1:1995 Coal and coke - Analysis and testing part 14.1:Higher rank coal ash and coke ash - Major and minor elements - Borate fusion/flame atomic absorption spectrometric method
AS 1038.10.1:2003 Coal and coke - Analysis and testing - Determination of trace elements - Coal, coke and fly-ash - Dtermination of eleven trace elements - Flame atomic absorption spectrometric method
AS 1038.14.1:2003(R2013)
AS 1038.10.1:2003(R2013)
AS 1038.10.5:1993 Coal and coke - Analysis and testing Part 10.5: Coal, coke and fly-ash-Trace elements - Determination of mercury content
AS 4205.2:1994 Analysis of urine for trace elements - Determination of copper, cadmium and lead - Flame atomic absorption spectrometric method
AS 4195.1:1994 Analysis of serum and plasma for trace elements - Determination of aluminium content - Graphite furnace atomic absorption spectrometric method
AS ISO 17974:2006 Surface chemical analysis - High-resolution Auger electron spectrometers - Calibration of energy scales for elemental and chemical-state analysis
AS 1038.10.3:1998(R2013)
AS 1038.10.5.1:2003(R2013)
AS 1038.10.4:2001 Coal and coke - Analysis and testing - Determination of trace elements - Coal, coke and fly-ash - Determination of fluorine content - Pyrohydrolysis method
AS 1038.10.4:2001(R2013)

Professional Standard - Commodity Inspection, Multi-element trace analysis

SN/T 3128-2012 Determination of oxygen element in organic chemicals.Elemental analyzer method
SN/T 3005-2011 Test method for instrumental determination of carbon,hydrogen,nitrogen and sulfur in organic chemicals

HU-MSZT, Multi-element trace analysis

ES-UNE, Multi-element trace analysis

UNE-EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of trace elements, heavy metals and other elements in feed by ICP-MS (multi-method)
UNE-EN 12938:1999 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
UNE-EN 17351:2021 Bio-based products - Determination of the oxygen content using an elemental analyser
UNE-EN 16785-1:2016 Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis
UNE-EN 13615:2001 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
UNE-EN 13615:2001/AC:2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry (Endorsed by AENOR in February of 2003.)

Group Standards of the People's Republic of China, Multi-element trace analysis

T/CNTAC 70-2020 Quantitative detection for graphene materials in fibers - Elemental analysis method
T/SPSTS 013-2019 Determination of the carbon, hydrogen, oxygen, nitrogen, and sulfur content of graphene powder materials— Elemental analyzer method
T/CSTM 00340-2020 Determination of the carbon, hydrogen, oxygen, nitrogen, and sulfur content of graphene powder materials— Elemental analyzer method
T/CSTM 00012E-2021 Iron and steel--Characterization of distribution of multi-element contents and status--Original position statistic distribution analysis method of laser induced breakdown spectroscopy
T/CSTM 00012-2017 Laser-induced breakdown spectroscopy in-situ statistical distribution analysis method for multi-element composition and state distribution characterization of iron and steel
T/CWAN 0029.1-2021 Methods for chemical analysis of nickel-based welding materials - Part 1: Determination of multi-element content by inductively coupled plasma atomic emission spectrometry
T/SDAS 4-2016 Methods for chemical analysis of high purity gold—Determination of impurity elements contents—Glow discharge mass spectrometry
T/NAIA 0128-2022 Rapid Determination of Aluminum Hydroxide Determination of Element Content by X-ray Fluorescence Spectroscopic Analysis (Tablet)
T/CSTM 00010.1-2017 Determination of multi-element content in iron and steel - Spark discharge atomic emission spectrometry (conventional method) - Part 1: Carbon steel and medium and low alloy steel
T/CSTM 00010.2-2017 Determination of multi-element content in iron and steel - Spark discharge atomic emission spectrometry (conventional method) - Part 2: Non-alloy steel

未注明发布机构, Multi-element trace analysis

BS 6870-3:1989(1999) Analysis of aluminium ores — Part 3 : Method for multi - element analysis by wavelength dispersive X - ray fluorescence

European Committee for Standardization (CEN), Multi-element trace analysis

EN 17053:2018 Animal feeding stuffs: Methods of sampling and analysis - Determination of trace elements@ heavy metals and other elements in feed by ICP-MS (multi-method)
EN 15205:2006 Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis
EN 16785-1:2015 Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis
EN 15111:2007 Foodstuffs - Determination of trace elements - Determination of iodine by ICP-MS (inductively coupled plasma mass spectrometry)
EN 16318:2013 Fertilizers and liming materials - Determination of chromium(VI) by photometry (method A) and by ion chromatography with spectrophotometric detection (method B) (Incorporates Amandment A1: 2016)

ZA-SANS, Multi-element trace analysis

SANS 406:2006 Coal and coke - Analysis and testing - Determination of trace elements - Guide to the determination of trace elements
SANS 409:2006 Coal and coke - Analysis and testing - Determination of trace elements - Coal, coke and fly-ash - Determination of eleven trace elements - Flame atomic absorption spectrometric method
SANS 411:2006 Coal and coke - Analysis and testing - Determination of trace elements - Determination of arsenic, antimony and selenium - Hydride generation method
SANS 412:2006 Coal and coke - Analysis and testing - Determination of trace elements - Determination of boron content - ICP-AES method

Danish Standards Foundation, Multi-element trace analysis

DS/EN 12938/AC:2001 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
DS/EN 12938:2001 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
DS/EN 13615/AC:2003 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90% and 99,85% by atomic spectrometry
DS/EN 13615:2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90% and 99,85% by atomic spectrometry

Lithuanian Standards Office , Multi-element trace analysis

LST EN 12938-2000 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
LST EN 12938-2000/AC-2003 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
LST EN 10179-2000 Chemical analysis of ferrous materials - Determination of nitrogen (trace mounts) in steel - Spectrophotometric method
LST EN 13615-2002 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry
LST EN 13615-2002/AC-2003 Methods for the analysis of ingot tin - Determination of impurity element contents in tin grades 99,90 % and 99,85 % by atomic spectrometry

Professional Standard - Aviation, Multi-element trace analysis

HB 8422-2014 Quantitative detection method of EPMA for trace elements in alloys

VN-TCVN, Multi-element trace analysis

TCVN 6645-2000 Soil quality.Determination of total nitrogen content by dry combustion ("elemental analysis")
TCVN 6642-2000 Soil quality.Determination of organic and total carbon after dry combustion (elementary analysis)

RO-ASRO, Multi-element trace analysis

STAS 10274/2-1983 Solid fuck ASH ANALYSIS Quantitative spectral analysis of minor, rare and dispersed elements
STAS 9844/6-1976 TEXTILES Quantitativc chcmicat analysis of binary inixtures of wool fibres and regenerated cellulcse
STAS 7409-1974 TEXTILES Quantitative chemical analysis of binary mixtures of polyester fibres and cellulose fibres
STAS 9844/2-1975 TEXTILES Quantitative analysis of binary mixtures of cotton fibres and cellulose base man made fibres
STAS 9844/23-1983 TEXTTLES Quantitative chemical analysis of ternary mixtures of wool with polyester and cellulosce fibrcs
STAS 7101-1973 TEXTILE MATERIALS Quantitative analysis of binary mixtu- res ol acrylic fibres and wool, cotton or cellulose-based staple fibres
STAS 9844/7-1976 TEXTILES Quantitative chemical analysis of binary mixtures of chlorofibres and wool or cellulose-base fibres
STAS 12516/1-1992 Cooper, lead, zinc ores, pyrite and complex sulphides. Determination of zinc content from some mineralogical elements. Rational analysis
STAS 12516/2-1992 Cooper, lead, zinc ors, pyrite and complex sulphides. Determination of lead content from some mineralogical elements. Rational analysis
STAS 9844/26-1985 Texliles QUANTITATIVE CHEMICAL ANAL YSIS OF QUATERNAR BLENDS OF WOOL, POLYA- MIDE, POLYESTER AND CELLULOSI C FIBRES

CEN - European Committee for Standardization, Multi-element trace analysis

PREN 17351-2019 Bio-based products - Determination of the oxygen content using an elemental analyser
PREN 16785-2014 Bio-based products - Determination of the bio-based content using the radiocarbon analysis and elemental analysis

国家质量监督检验检疫总局, Multi-element trace analysis

SN/T 4764-2017 Elemental analyzer method for determination of carbon, hydrogen, nitrogen and sulfur content in coal

AENOR, Multi-element trace analysis

UNE 77325:2003 Soil quality. Determination of total nitrogen content by dry combustion ("elemental analysis").
UNE 77321:2003 Soil quality. Determination of organic and total carbon after dry combustion (elementary analysis).
UNE 36317-2:1989 Chemical analysis of ferrous materials - Determination of nitrogen (trace mounts) in steel - Spectrophotometric method

Professional Standard - Nuclear Industry, Multi-element trace analysis

EJ/T 1212.4-2008 Test methods for analysis of sintered gadolinium oxide-uranium dioxide pellets.Part4: Determination of trace impurity ICP-AES multi-spectral-fitting method

GOSTR, Multi-element trace analysis

GOST R 57987-2017 Polymer composites. Infrared spectroscopy. Multivariate quantitative analysis

AT-ON, Multi-element trace analysis

ONORM L 1094-3-2001 Chemical analyses of soils - Extraction of trace elements with a solution of lithium chloride

PL-PKN, Multi-element trace analysis

PN H04208-03-1989 Analiza chemiczna ?elazostopów ?elazomolibden Oznaczanie zawarto?ci krzemu
PN Z04020-02-1991 Air purity protection. Tests for elemental carbon content. Determination of elemental carbon in dust in ambient air (immission) by gas chromatography

Anhui Provincial Standard of the People's Republic of China, Multi-element trace analysis

DB34/T 2127.4-2014 Methods of Analytical Samples for Regional Geochemical Surveys Part 4: Determination of Multielement Content by Plasma Mass Spectrometry
DB34/T 2127.2-2014 Methods of Analysis of Samples for Regional Geochemical Surveys Part 2: Determination of Multielement Content by X-ray Fluorescence Spectrometry
DB34/T 2127.8-2014 Methods of Analysis of Samples for Regional Geochemical Surveys - Part 8: Determination of Multielement Content by Flame Atomic Absorption Spectrometry
DB34/T 2127.3-2014 Methods of Analytical Analysis of Samples for Regional Geochemical Surveys Part 3: Determination of Multielement Content by Inductively Coupled Plasma Spectroscopy

Professional Standard - Chemical Industry, Multi-element trace analysis

HG/T 5018-2016 Determination methods of the major components and trace metal elements in waste etching liquor containing copper

工业和信息化部/国家能源局, Multi-element trace analysis

JB/T 12962.2-2016 Energy dispersive X-ray fluorescence spectrometer Part 2: Elemental analyzers

IN-BIS, Multi-element trace analysis

RU-GOST R, Multi-element trace analysis

GOST 31870-2012 Drinking water. Determination of elements content by atomic spectrometry methods
GOST R ISO 22309-2015 State system for insuring the uniformity of measurements. Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS) for elements with an atomic number of 11 (Na) or above

Professional Standard - Energy, Multi-element trace analysis

NB/SH/T 0892-2015 Standard test method for determination of trace elements in middle distillate fuels by inductively coupled plasma atomic emission spectrometry (ICP-AES)

Japanese Industrial Standards Committee (JISC), Multi-element trace analysis

JIS K 0165:2011 Surface chemical analysis -- Medium-resolution Auger electron spectrometers -- Calibration of energy scales for elemental analysis
JIS K 0166:2011 Surface chemical analysis -- High-resolution Auger electron spectrometers -- Calibration of energy scales for elemental and chemical-state analysis

KR-KS, Multi-element trace analysis

KS I ISO 10694-2021 Soil quality — Determination of organic and total carbon after dry combustion(elementary analysis)

Jiangsu Provincial Standard of the People's Republic of China, Multi-element trace analysis

DB32/T 3595-2019 Elemental analyzer method for the determination of carbon, hydrogen, nitrogen, sulfur and oxygen content in graphene materials

Yunnan Provincial Standard of the People's Republic of China, Multi-element trace analysis

DB53/T 639.7-2014 Methods for chemical analysis of direct reduced iron - Part 7: Determination of multiple elements by X-ray fluorescence spectrometry
DB53/T 639.6-2014 Methods for chemical analysis of direct reduced iron - Part 6: Determination of multiple elements by flame atomic absorption spectrometry

YU-JUS, Multi-element trace analysis

JUS C.A1.616-1980 Methods for chemical analvsis ofcopper and copper alloys. Votumetric determination ofcontent ofiron as alloving element

Taiwan Provincial Standard of the People's Republic of China, Multi-element trace analysis

CNS 12996-1992 Method of Determination for Contents of Metallic Elements of Hardmetals by X-Ray Fluorescence (Fusion Method)

API - American Petroleum Institute, Multi-element trace analysis

API 4155-1971 Rapid Methods of Analysis for Trace Quantities of Polynuclear Aromatic Hydrocarbons and Phenols in Automobile Exhaust@ Gasoline@ and Crankcase Oil - Final Report

BE-NBN, Multi-element trace analysis

NBN P 33-002-1985 Zinc ores -Determination of zinc content

American National Standards Institute （ANSI), Multi-element trace analysis

ANSI/ASTM D6247:1998 Test Method for Analysis of Elemental Content in Polyolefins by X-Ray Fluorescence Spectrometry

Professional Standard - Agriculture, Multi-element trace analysis

SN/T 5581-2023 Determination of monomer content in recycled acrylonitrile-butadiene-styrene copolymers by elemental analysis

Association of German Mechanical Engineers, Multi-element trace analysis

VDI 2465 Blatt 1-1996 Measurement of soot (immission) - Chemical analysis of elemental carbon by extraction and thermal desorption of the organic carbon

BELST, Multi-element trace analysis

STB 1313-2002 Raw material and food productsMethods of definition contents of toxic elements zinc, cadmium, lead and copper by stripping voltammetric analysis on analyzers type TA
STB 1314-2002 Milk and daily products. Methods of definition contents of toxic elements zinc, cadmium, lead and copper by stripping voltammetric analysis on analyzers type TA