ZH
RU
ES
Calcium Analysis in Solids
Calcium Analysis in Solids, Total:316 items.
In the international standard classification, Calcium Analysis in Solids involves: Construction materials, Environmental protection, Coals, Fuels, Analytical chemistry, Soil quality. Pedology, Particle size analysis. Sieving, Sugar. Sugar products. Starch, Ferrous metals, Air quality, Products of the chemical industry, Testing of metals, Fertilizers, Water quality, Electronic components in general, Inorganic chemicals, Wastes, Non-ferrous metals, Lubricants, industrial oils and related products, Radiation protection, Vocabularies, Power transmission and distribution networks, Protection against fire, Food products in general, Wood-based panels, Metrology and measurement in general, Equipment for the chemical industry, Burners. Boilers, Aerospace engines and propulsion systems, Radiation measurements, Ferroalloys, Insulating fluids, General methods of tests and analysis for food products, Plastics, Milk and milk products, Mechanical testing, Capacitors.
RO-ASRO, Calcium Analysis in Solids
HU-MSZT, Calcium Analysis in Solids
Professional Standard - Aerospace, Calcium Analysis in Solids
- QJ 913.7-1985 Composite solid propellant (polyether system) Calcium carbonate content analysis method
- QJ 913A-1995 Analysis Method of Aluminum Powder Content in Composite Solid Propellant
- QJ 914.4-1985 Composite solid propellant (butylene carboxyl system) - Analysis method for moisture content
- QJ 914.5-1985 Composite solid propellant (butylene carboxyl system) - Analytical method for residual styrene
- QJ 914.2-1985 Analytical method of ammonium perchlorate content in composite solid propellant (butylene carboxyl system)
- QJ 913.3-1985 Composite solid propellant (polyether system) - Analysis method for copper chromite content
GOSTR, Calcium Analysis in Solids
- GOST R 59264-2020 Solid mineral fuel. Method for the determination of free calcium oxide in the ash
- GOST 34092-2017 Solid biofuel. Conversion of analytical results on different basis
SE-SIS, Calcium Analysis in Solids
- SIS 02 81 21-1974 Determination of the sum of calcium and magnesium concentration of water
- SIS SS-EN 10 177-1989 Chemical analysis of ferrous materials — Determination of calcium in steels — Flame atomic absorption spectrometric method
AENOR, Calcium Analysis in Solids
- UNE 32009:1958 Solid fuels analysis. Determination of the forms of sulphur in coal.
- UNE 32002:1995 SOLID MINERAL FUELS. DETERMINATION OF MOISTURE IN THE ANALYSIS SAMPLE.
- UNE 32014:1962 SOLID FUELS ANALYSIS. PHOSPHORUS DETERMINATION IN ASHES OF COAL AND COKE BY GRAVIMETRIC METHOD.
- UNE 36320-1:1989 Chemical analysis of ferrous materials - Determination of calcium in steels - Flame atomic absorption spectrometric method
- UNE-EN 15414-3:2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
- UNE 64040:1973 MIXED FEEDS AND RAW MATERIALS. ANALYSIS OF VITAMIN A IN AQUEOUS DISPERSIONS.
- UNE 32301:1995 SOLID MINERAL FUELS. PETROGRAPHIC ANALYSIS METHODS. METHOD FOR DETERMINING MICROSCOPICALLY THE REFLECTANCE OF VITRINITE.
- UNE-EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
IT-UNI, Calcium Analysis in Solids
Professional Standard - Nuclear Industry, Calcium Analysis in Solids
- EJ/T 296.1-1987 Analytical method of trace uranium in urine solid fluorescence method
- EJ/T 532-1990 Requirements for Safety Analysis Report of Temporary Repository of Low- and Intermediate-level Radioactive Solid Waste
- EJ 296.2-1987 Analytical method of trace uranium in urine laser liquid fluorescence method
国家市场监督管理总局、中国国家标准化管理委员会, Calcium Analysis in Solids
- GB/T 39527-2020 Determination of calcium, aluminium and silicon in the solid surface materials—Method of chemical analysis
- GB/T 41076-2021 Microbeam analysis—Electron backscatter diffraction—Quantitative determination of austenite in steel
- GB/T 12690.15-2018 Chemical analysis methods for non-rare earth impurities of rare earth metals and their oxides―Part 15: Determination of calcium content
- GB/T 38386-2019 Gas analysis—Determination of oxynitride in gases—The method of Cavity Ring-Down Spectroscopy
Professional Standard - Commodity Inspection, Calcium Analysis in Solids
- SN/T 0328-1994 Chemical analysis method for the calciumfluride in export fluorspar
Professional Standard - Construction Industry, Calcium Analysis in Solids
- JG/T 5066-1996 Determination of solid particulate contaminant in fluids by the gravimetric method
CZ-CSN, Calcium Analysis in Solids
- CSN 44 1358-1976 Analysis of solid fuel ash
- CSN 72 2041-5-1992 Chemical analysis of steel-making slags. Determination of calcium oxide content in samples free of florine
- CSN 44 1377-1978 Determination of moisture in salid fuels.
- CSN 44 1308-1996 Solid minerál fuels. Sampling from stockpiles for size analysis
- CSN 44 1310-2001 Solid fuels - Symbols of analytical parameters and formulae for converting the results of analyses of different states of fuels
- CSN 35 8291 Cast.15-1988 Fixed capacitors for usa in electronic equipment. Part 15: Sectional speoification: Fixed tantalum capacitors with non solid or solid electrolyte
- CSN 441310-2001 Solid fuels - Symbols of analytical parameters and formulae for converting the results of analyses of different states of fuels
- CSN ISO 1213-2:1994 Solid mineral fuels. Vocabulary. Part 2: Terms relating to sampling, testing and analysis
IN-BIS, Calcium Analysis in Solids
RU-GOST R, Calcium Analysis in Solids
- GOST 33503-2015 Solid mineral fuel. Methods for determination of moisture in the analysis sample
- GOST R 52917-2008 Solid mineral fuels. Methods for determination of moisture in the analysis test sample
- GOST 32975.3-2014 Solid biofuels. Determination of moistire content by drying. Part 3. Moisture in general analysis sample
- GOST R 54211-2010 Solid biofuels. Determination of moisture content by oven dry method. Part 3. Moisture in general analysis sample
- GOST R 54245-2010 Solid mineral fuel. Calculation of analyses to different bases
- GOST 33512.3-2015 Solid recovered fuels. Determination of moisture content using the oven dry method. Part 3. Moisture in general analysis sample
- GOST R 55113-2012 Solid biofuels. Conversion of analytical results from one basis to another
- GOST 27313-2015 Solid mineral fuel. Simbols of quality indicators and calculation of analyses to different bases
- GOST R 54233-2010 Solid recovered fuels. Determination of moisture content using the oven dry method. Part 3. Moisture in general analysis sample
VN-TCVN, Calcium Analysis in Solids
- TCVN 4919-2007 Solid mineral fuels.Coke.Determination of moisture in the general analysis test sample
International Organization for Standardization (ISO), Calcium Analysis in Solids
- ISO 687:2004 Solid mineral fuels - Coke - Determination of moisture in the general analysis test sample
- ISO 687:2010 Solid mineral fuels - Coke - Determination of moisture in the general analysis test sample
- ISO/CD 687:2023 Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample
- ISO/TS 22107:2021 Dispersibility of solid particles into a liquid
- ISO 11722:2013 Solid mineral fuels - Hard coal - Determination of moisture in the general analysis test sample by drying in nitrogen
- ISO 18134-3:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
- ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
- ISO 11726:2004 Solid mineral fuels - Guidelines for the validation of alternative methods of analysis
- ISO 11726:2017 Solid mineral fuels - Guidelines for the validation of alternative methods of analysis
- ISO 8358:1991 Solid fertilizers; preparation of samples for chemical and physical analysis
- ISO 15239:2005 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
- ISO 8189:1992 Solid fertilizers — Determination of moisture content — Gravimetric method by drying under reduced pressure
- ISO 19702:2006 Toxicity testing of fire effluents - Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis
- ISO/DIS 16094-2:2011 Water quality — Analysis of microplastic in water — Part 2: Vibrational spectroscopy methods for waters with low content of suspended solids including drinking water
- ISO/CD 16094-3 Water quality — Analysis of plastics in water — Part 3: Thermo-analytical methods for waters with low content of natural suspended solids
- ISO 925:1980 Solid mineral fuels; Determination of carbon dioxide content; Gravimetric method
- ISO 16993:2016 Solid biofuels - Conversion of analytical results from one basis to another
- ISO 11722:1999 Solid mineral fuels - Hard coal - Determination of moisture in the general analysis test sample by drying in nitrogen
- ISO 8190:1992 Solid fertilizers — Determination of moisture content — Gravimetric method by drying at (105 plus or minus 2) degrees C
- ISO/DIS 24181-1:2023 Rare Earth — Determination of non-rare earth impurities in individual rare earth metals and their oxides — ICP-AES — Part 1: Analysis of Al, Ca, Mg, Fe and Si
Korean Agency for Technology and Standards (KATS), Calcium Analysis in Solids
- KS I ISO TS 29041:2016 Gas mixtures－Gravimetric preparation－Mastering correlations in composition
- KS L 5300-2009 Determination of asbestos in bulk material
- KS E ISO 687:2022 Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample
- KS M 1810-2008 Analysis method for determination of lead and cadmium in resistance
- KS E ISO 11722-2017(2022) Solid mineral fuels — Hard coal — Determination of moisture in the general analysis test sample by drying in nitrogen
- KS E ISO 11726:2007 Solid mineral fuels－Guidelines for the validation of alternative methods of analysis
- KS M 8358-2005(2018)
- KS M ISO 8358:2007 Solid fertilizers-Preparation of samples for chemical and physical analysis
- KS M ISO 8358:2013 Solid fertilizers－Preparation of samples for chemical and physical analysis
- KS M ISO 8358-2007(2012) Solid fertilizers－Preparation of samples for chemical and physical analysis
- KS E ISO 15239:2007 Solid mineral fuels－Evaluation of the measurement performance of on-line analysers
- KS M ISO 21687-2016(2021) Carbonaceous materials used in the production of aluminium－Determination of density by gas pyknometry (volumetric) using helium as the analysis gas－Solid materials
- KS D ISO 3815-1-2006(2016) Zinc and zinc alloys－Part 1：Analysis of solid samples by optical emission spectrometry
- KS I ISO TS 14167:2015 Gas analysis－General quality assurance aspects in the use of calibration gas mixtures－Guidelines
- KS E ISO 11722:2007 Solid mineral fuels－Hard coal－Determination of moisture in the general analysis test sample by drying in nitrogen
- KS E ISO 11722:2017 Solid mineral fuels－Hard coal－Determination of moisture in the general analysis test sample by drying in nitrogen
- KS C IEC 60384-18:2018 Fixed capacitors for use in electronic equipment — Part 18: Sectional specification — Fixed aluminium electrolytic surface mount capacitors with solid(MnO 2 ) and non-solid electrolyte
- KS C IEC 60384-18-2023 Fixed capacitors for use in electronic equipment Part 18: Fixed aluminum electrolytic surface mount capacitors with solid (Mno2) and non-solid electrolytes in segmented specifications
British Standards Institution (BSI), Calcium Analysis in Solids
- BS ISO 687:2010 Solid mineral fuels. Coke. Determination of moisture in the general analysis test sample
- BS EN 14774-3:2009 Solid biofuels - Determination of moisture content - Oven dry method - Moisture in general analysis sample
- BS EN 14774-3:2010 Solid biofuels. Determination of moisture content. Oven dry method. Moisture in general analysis sample
- BS EN ISO 18134-3:2015 Solid biofuels. Determination of moisture content. Oven dry method. Moisture in general analysis sample
- BS PD ISO/TS 22107:2021 Dispersibility of solid particles into a liquid
- PD ISO/TS 22107:2021 Dispersibility of solid particles into a liquid
- BS DD CEN/TS 14774-3:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Moisture in general analysis sample
- DD CEN/TS 15296:2006 Solid Biofuels — Calculation of analyses to different bases
- DD CEN/TS 15414-3:2006 Solid recovered fuels — Determination of moisture content using the oven dry method — Part 3: Moisture in general analysis sample
- BS EN ISO 21660-3:2021 Solid recovered fuels. Determination of moisture content using the oven dry method. Moisture in general analysis sample
- BS EN 10177:2019 Chemical Analysis of Ferrous Materials Determination of Calcium in Steels Flame Atomic Absorption Spectrometric Method
- BS ISO 11726:2005 Solid mineral fuels - Guidelines for the validation of alternative methods of analysis
- BS 5551-4.5:1993 Fertilizers. Chemical analysis. Method for determination of mineral-acid-soluble sulfate content of solid fertilizers
- BS DD CEN/TS 15414-3:2006 Solid recovered fuels - Determination of moisture content using the oven dry method - Moisture in general analysis sample
- BS DD CEN/TS 15296:2006 Solid biofuels - Calculation of analyses to different bases
- DD CEN/TS 14774-3:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
- 22/30439841 DC BS ENI SO 18134-3. Solid biofuels. Determination of moisture content. Oven dry method - Part 3. Moisture in general analysis sample
- BS 3323:1992 Glossary of terms relating to sampling, testing and analysis of solid mineral fuels
- BS ISO 15239:2005 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
- BS EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
- BS EN 15414-3:2011 Solid recovered fuels. Determination of moisture content using the oven dry method. Moisture in general analysis sample
- 19/30369425 DC BS EN ISO 21660-3. Solid recovered fuels. Determination of moisture content using the oven dry method. Part 3. Moisture in general analysis sample
- DD ISO/TS 12902:2002 Solid mineral fuels. Determination of total carbon, hydrogen and nitrogen. Instrumental methods
- BS EN ISO 16993:2015 Solid biofuels. Conversion of analytical results from one basis to another
- BS EN 15296:2011 Solid biofuels. Conversion of analytical results from one basis to another
- BS 1742-2:1990 Methods for chemical analysis of condensed milks - Determination of total solids content of sweetened condensed milks
- BS ISO 21087:2019 Gas analysis. Analytical methods for hydrogen fuel. Proton exchange membrane (PEM) fuel cell applications for road vehicles
PT-IPQ, Calcium Analysis in Solids
- NP 1014-1987
- NP 3862-1999 Solid fuels. Medium and High-Rank coals. Size analysis by sieving
- NP 3862-1-2001 Solid fuels Médium and High-Rank coals Size analysis by sieving
- NP 1011-1989 SOLID FUELS Coals Determination of moisture in the analysis sample Direct gravimetric method ISO method
- NP 3539-1987
- NP 4372-1999 Solid fuels Coals and cokes Determination of moisture in the analysis sample by the indirect gravimetric method (ASTMmethod)
- NP 3421-1987 Combustibles solides. Charbons de bas rang. Classification ISO
- NP 2266-1986
IPC - Association Connecting Electronics Industries, Calcium Analysis in Solids
Xinjiang Provincial Standard of the People's Republic of China, Calcium Analysis in Solids
Danish Standards Foundation, Calcium Analysis in Solids
- DS/ISO 687:2010 Solid mineral fuels - Coke - Determination of moisture in the general analysis test sample
- DS/ISO/TS 22107:2021 Dispersibility of solid particles into a liquid
- DS/ISO 21660-3:2021 Solid recovered fuels – Determination of moisture content using the oven dry method – Part 3: Moisture in general analysis sample
- DS/EN 14774-3:2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
- DS/EN 15414-3:2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
- DS/EN ISO 21660-3:2021 Solid recovered fuels – Determination of moisture content using the oven dry method – Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
- DS/EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
- DS/ISO 19702:2006 Toxicity testing of fire effluents - Guidance for analysis of gases and vapours in fire effluents using FTIR gas analysis
- DS/EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
KR-KS, Calcium Analysis in Solids
- KS E ISO 687-2022 Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample
- KS E ISO 11722-2017 Solid mineral fuels－Hard coal－Determination of moisture in the general analysis test sample by drying in nitrogen
- KS C IEC 60384-18-2018 Fixed capacitors for use in electronic equipment — Part 18: Sectional specification — Fixed aluminium electrolytic surface mount capacitors with solid(MnO 2 ) and non-solid electrolyte
American Society for Testing and Materials (ASTM), Calcium Analysis in Solids
- ASTM D6866-10 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
- ASTM D6866-21 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
- ASTM D6866-16 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
- ASTM D6866-08 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
- ASTM D6866-22 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
- ASTM D8339-20 Standard Test Method for The Analysis of Flue Gas Desulfurization Solids by Macro Thermogravimetric Analysis
- ASTM UOP993-15 Water in Solids by Furnace Desorption with Volumetric Karl Fischer Titration
- ASTM D5368-93(2001) Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
- ASTM D5368-93(2006) Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
- ASTM D5368-13 Standard Test Methods for Gravimetric Determination of Total Solvent Extractable Content (TSEC) of Solid Waste Samples
- ASTM D4628-05(2011)e1 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
- ASTM D4628-16 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
- ASTM D4628-97 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc In Unused Lubricating Oils By Atomic Absorption Spectrometry
- ASTM D4628-05 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc In Unused Lubricating Oils By Atomic Absorption Spectrometry
- ASTM D4628-02 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc In Unused Lubricating Oils By Atomic Absorption Spectrometry
- ASTM UOP649-10 Total Oxygen in Solid, Semi-solid, and High Boiling Point Liquid Hydrocarbons by Pyrolysis
- ASTM UOP759-76 Trace Oxygen in Gases by Gas Chromatography
- ASTM D4628-23 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
- ASTM D4628-14 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
- ASTM UOP333-07 Fines in Catalysts and Catalyst Supports by Sieve Analysis
- ASTM D7166-10 Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels
- ASTM D8049-19a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
- ASTM D8049-19 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
- ASTM D8049-21 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
- ASTM D3612-02 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
- ASTM D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
- ASTM D8049-17 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
- ASTM D8049-16a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer
- ASTM D6866-11 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
- ASTM E831-12 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
- ASTM E831-13 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
German Institute for Standardization, Calcium Analysis in Solids
- DIN 51734:2008 Testing of solid mineral fuels - Proximate analysis and calculation of fixed carbon
- DIN 10743:2013 Analysis of honey - Determination of water-insoluble solids
- DIN 51734:2008-12 Testing of solid mineral fuels - Proximate analysis and calculation of fixed carbon
- DIN EN ISO 18134-3:2022-07 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample (ISO/DIS 18134-3:2022); German and English version prEN ISO 18134-3:2022 / Note: Date of issue 2022-06-03*Intended as replacement for DIN...
- DIN EN ISO 18134-3:2015-12 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample (ISO 18134-3:2015); German version EN ISO 18134-3:2015 / Note: To be replaced by DIN EN ISO 18134-3 (2022-07).
- DIN EN ISO 21660-3:2021-06 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021); German version EN ISO 21660-3:2021
- DIN 51718:2002-06 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
- DIN EN 10177:1990 Chemical analysis of ferrous materials; determination of calcium in steels; flame atomic absorption spectrometric method; german version EN 10177:1989
- DIN 51733:2016 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
- DIN 51733:2008 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
- DIN 51733:2016-04 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
- DIN 51724-3:2008 Solid mineral fuels - Determination of sulfur - Part 3: Instrumental methods
- DIN EN 16476:2014 Liquid petroleum products - Determination of Sodium, Potassium, Calcium, Phosphorus, Copper and Zinc contents in diesel fuel - Method via Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES); German version EN 16476:2014
- DIN EN 14774-3:2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample; German version EN 14774-3:2009
- DIN EN ISO 21660-3:2020 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO/DIS 21660-3:2019); German and English version prEN ISO 21660-3:2019
- DIN 51718:2002 Testing of solid fuels - Determination of the water content and the moisture of analysis sample
- DIN EN ISO 18134-3:2023-09 Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample (ISO 18134-3:2023); German version EN ISO 18134-3:2023
- DIN 54385:2016 Solid recovered fuels - Collection of representative analytical samples from heterogeneous materials of low bulk density using the pressing-drill method
- DIN 54385:2016-08 Solid recovered fuels - Collection of representative analytical samples from heterogeneous materials of low bulk density using the pressing-drill method
- DIN 10810:1996-02 Analysis of tea and tea products - Determination of theobromine and coffeine content of instant tea in solid form and instant tea products - HPLC-method
- DIN 10172-3:2023-06 Microbiological analysis of milk - Determination of coliforms - Part 3: Method with solid medium
- DIN 51941-1:1994 Testing of carbon materials - Determination of chemical composition - Part 1: Sample preparation, solid materials, solid binders and impregnants
- DIN EN 62703:2014-12 Expression of performance of fluorometric oxygen analyzers in liquid media (IEC 62703:2013); German version EN 62703:2013
- DIN 51729-10:2011-04 Testing of solid fuels - Determination of chemical composition of fuel ash - Part 10: X-Ray Fluorescence Analysis
Standard Association of Australia （SAA）, Calcium Analysis in Solids
- ISO 18134-3:2023 Solid biofuels — Determination of moisture content — Part 3: Moisture in general analysis sample
ZA-SANS, Calcium Analysis in Solids
- SANS 11722:2005 Solid mineral fuels - Hard coal - Determination of moisture in the general analysis test sample by drying in nitrogen
- SANS 15239:2006 Solid mineral fuels - Evaluation of the measurement performance of on-line analysers
ES-AENOR, Calcium Analysis in Solids
Association Francaise de Normalisation, Calcium Analysis in Solids
- NF EN 12048:1997 Engrais solides et amendements calciques et/ou magnésiens - Détermination de la teneur en eau - Méthode gravimétrique par séchage à (105 + ou - 2) degrés C.
- NF X34-106-3:2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 3 : moisture in general analysis sample.
- NF M01-005:1967 Solid mineral fuels. Methods for evaluating random errors in the preparation and analysis of a sample.
- NF A08-361:1989 Chemical analysis of ferrous materials. Determination of calcium in steels. Flame atomic absorption spectrometric method.
- NF X34-106-3*NF EN ISO 18134-3:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 3 : moisture in general analysis sample
- NF X34-201-3*NF EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3 : moisture in general analysis sample
- NF EN ISO 105-G03:1997 Textiles - Essais de solidité des teintures - Partie G03 : solidité des teintures à l'ozone dans l'atmosphère.
- NF EN ISO 105-Z02:1996 Textiles - Essais de solidité des teintures - Partie Z02 : solidité des teintures aux métaux dans les bains de teinture : fer et cuivre.
- NF EN 12049:1997 Engrais solides et amendements calciques et/ou magnésiens - Détermination de la teneur en eau - Méthode gravimétrique par séchage sous pression réduite.
- NF C46-254*NF EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
- NF EN 62703:2013 Expression des performances des analyseurs d'oxygène fluorométriques en milieu liquide
- NF EN 60384-4:2016 Condensateurs fixes utilisés dans les équipements électroniques - Partie 4 : spécification intermédiaire - Condensateurs électrolytiques en aluminium, à électrolyte solide (MnO2) et non solide
- NF X34-116:2011 Solid biofuels - Conversion of analytical results from one basis to another.
- NF EN ISO 105-Z01:1996 Textiles - Essais de solidité des teintures - Partie Z01 : solidité des teintures aux métaux dans les bains de teinture : sels de chrome.
- NF EN 15415-3:2012 Combustibles solides de récupération - Détermination de la distribution granulométrique - Partie 3 : méthode par analyse d'images des particules de grande dimension
- NF X11-685:1983
- NF X20-542-1/A1*NF ISO 6142-1/A1:2021 Gas analysis - Preparation of calibration gas mixtures - Part 1 : gravimetric method for Class I mixtures - AMENDMENT 1 : Corrections to formulae in Annex E and Annex G
American National Standards Institute （ANSI), Calcium Analysis in Solids
- BS EN ISO 18134-3:2023 Solid biofuels. Determination of moisture content Moisture in general analysis sample (British Standard)
PL-PKN, Calcium Analysis in Solids
- PN G04514-16-1990 Solid fuels Determination of total sulphur and of sulphur in ash with the use of the LECO automatic analyser
- PN EN 10177-1993 Chemical analysis of ferrous materials Determination of calcium in steels Flame atomie absorption spectrometric method
- PN C04504-1992 Chemical analysis. Determination of density of liquid chemical products and solids in powder
- PN-EN ISO 21660-3-2021-08 E Solid recovered fuels -- Determination of moisture content using the oven dry method -- Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
CL-INN, Calcium Analysis in Solids
UY-UNIT, Calcium Analysis in Solids
European Committee for Standardization (CEN), Calcium Analysis in Solids
- EN 14774-3:2009 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
- EN ISO 18134-3:2023 Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample (ISO 18134-3:2023)
- EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
- EN 10177:1989 Chemical Analysis of Ferrous Materials Determination of Calcium in Steels Flame Atomic Absorption Spectrometric Method
- FprEN ISO 18134-3 Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample (ISO/FDIS 18134-3:2023)
- EN 10047:1989 Chemical Analysis of Ferrous Materials Determination of Calcium in Steels Flame Atomic Absorption Spectrometric Method
- EN 15296:2011 Solid biofuels - Conversion of analytical results from one basis to another [Superseded: CEN CEN/TS 15296]
- EN ISO 18134-3:2015 Solid biofuels - Determination of moisture content - Oven dry method Part 3: Moisture in general analysis sample
- EN ISO 16993:2015 Solid biofuels - Conversion of analytical results from one basis to another (ISO 16993:2015)
ES-UNE, Calcium Analysis in Solids
- UNE-EN ISO 18134-3:2016 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample (ISO 18134-3:2015)
- UNE-EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
- UNE-EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media (Endorsed by AENOR in October of 2013.)
CEN - European Committee for Standardization, Calcium Analysis in Solids
- PD CEN/TS 15296:2006 Solid Biofuels - Calculation of analyses to different bases
- PD CEN/TS 15414-3:2006 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
- PD CEN/TS 14774-3:2004 Solid biofuels - Methods for the determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
Professional Standard - Electron, Calcium Analysis in Solids
- SJ/T 10895-1996 Atomic absorption analysis of CaO, SrO, BaO and MgO in electronic glass
Japanese Industrial Standards Committee (JISC), Calcium Analysis in Solids
- JIS B 7985:2006 Continuous analyzers for methane in emission gas
- JIS K 0463:2009 Guidelines for reporter gene assay binding on arylhydrocarbon receptor -- Assay of Dioxins in an Ah Receptor
- JIS B 7983:1994 Continuous analyzers for oxygen in flue gas
- JIS B 7984:1997 Continuous analyzer for hydrogen chloride in flue gas
- JIS B 7984:2006 Continuous analyzer for hydrogen chloride in flue gas
- JIS K 0108:1983 Analytical methods for determination of hydrogen sulfide in exhaust gas
- JIS Z 8831-3:2010 Pore size distribution and porosity of solid materials -- Part 3: Analysis of micropores by gas adsorption
- JIS B 7983 AMD 1:2006 Continuous analyzers for oxygen in flue gas (Amendment 1)
- JIS Z 8831-2:2010 Pore size distribution and porosity of solid materials -- Part 2: Analysis of mesopores and macropores by gas adsorption
Qinghai Provincial Standard of the People's Republic of China, Calcium Analysis in Solids
- DB63/T 1613-2017 Chemical Analysis Method for Iron, Magnesium, Manganese, Copper, Calcium, Aluminum in Synthetic Nanodiamonds Inductively Coupled Plasma Emission Spectrometry
NL-NEN, Calcium Analysis in Solids
- NEN 2477-1993 Combustion products of solid mineral fuels. Determination of the contents of calcium, magnesium and of sodium and potassium of polverized fuel ash and bottom-ash, by flame atomic absorption spectrometry
Lithuanian Standards Office , Calcium Analysis in Solids
- LST EN 14774-3-2010 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample
- LST ISO 8358:2002 Solid fertilizers. Preparation of samples for chemical and physical analysis
- LST EN 10177-2000 Chemical analysis of ferrous materials - Determination of calcium in steels - Flame atomic absorption spectrometric method
- LST EN 15414-3-2011 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample
- LST EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
- LST EN 15415-3-2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Calcium Analysis in Solids
- GB/T 11113-1989 Analytical method for impurities in the synthetic quartz crystal
- GB/T 12690.15-2006 Chemical analysis methods for non-rare earth metals and their oxide.Determination of calcium oxide content
- GB/T 31949-2015(英文版) Manganese ores—Determination of mercury content—Solid sampling and direct mercury analysis method
- GB/T 31948-2015(英文版) Chromium ores—Determination of mercury content—Solid sampling and direct mercury analysis method
- GB/T 4324.13-2008 Methods of chemical analysis of tungsten Determination of calcium content Inductively coupled plasma atomic emission spectrometry
- GB/T 14415-1993 Analysis of water used in boiler and cooling system. Determination of solids matter
- GB/T 31947-2015(英文版) "Iron ores—Determination of mercury content—Solid sampling and direct
mercury analysis method"
- GB/T 4298-1984 The activation analysis method for the determination of elemental impurities in semiconductor silicon materials
- GB/T 43088-2023 Method for determination of dislocation density in metallic thin crystal specimens by microbeam analysis and electron microscopy
BE-NBN, Calcium Analysis in Solids
- NBN-EN 10177-1992 Chemical analysis of ferrous materials. Determination of calcium in steels. Flame atomic absorption spectrometric method
Canadian Standards Association (CSA), Calcium Analysis in Solids
- CAN/CSA-ISO 18134-3:2015 Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis sample (First Edition)
Institute of Electrical and Electronics Engineers (IEEE), Calcium Analysis in Solids
- IEEE 1406-1998 Guide to the Use of Gas-In-Fluid Analysis for Electric Power Cable Systems
Anhui Provincial Standard of the People's Republic of China, Calcium Analysis in Solids
- DB34/T 1728-2012 Analytical methods for conventional indicators in liquor solid-state fermentation yellow pulp water
Indonesia Standards, Calcium Analysis in Solids
- SNI 01-7206-2006 Emission tests of formaldehyde of wood panels by gas analysis methods
European Committee for Electrotechnical Standardization（CENELEC）, Calcium Analysis in Solids
- EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
International Electrotechnical Commission (IEC), Calcium Analysis in Solids
- IEC 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
AT-ON, Calcium Analysis in Solids
- OENORM EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
CH-SNV, Calcium Analysis in Solids
- SN EN ISO 21660-3:2021 Solid recovered fuels - Determination of moisture content using the oven dry method - Part 3: Moisture in general analysis sample (ISO 21660-3:2021)
Society of Automotive Engineers (SAE), Calcium Analysis in Solids
- SAE AIR5006/2-1996 Solid Rocket Booster Reliability Guidebook - Volume II Probabilistic Design and Analysis Methods for Solid Rocket Boosters
- SAE AIR5006/2-2012 Solid Rocket Booster Reliability Guidebook - Volume IIProbabilistic Design and Analysis Methods for Solid Rocket Boosters
Universal Oil Products Company (UOP), Calcium Analysis in Solids
- UOP 333-2010 Fines in Catalysts and Catalyst Supports by Sieve Analysis
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Calcium Analysis in Solids
- GB/T 35924-2018 Determination of moisture in solid chemical products－Thermogravimetry method
Group Standards of the People's Republic of China, Calcium Analysis in Solids
- T/QAS 082.7-2023 Chemical Analysis of Rock Salt and Glauber's Salt Part 7: Determination of Potassium, Sodium, Calcium and Magnesium by Inductively Coupled Plasma Emission Spectrometry
- T/CAIA SH012-2020 Rice —Determination of cadmium —Direct solid sample analysis using plasma jet atomic emission spectrometry
工业和信息化部, Calcium Analysis in Solids
- YS/T 1179.4-2017 Methods for chemical analysis of aluminum slag Part 4: Determination of silicon, magnesium and calcium content by inductively coupled plasma optical emission spectrometry
- YB/T 4174.1-2022 Analytical Methods for Calcium Silicon Alloys Part 1: Determination of Aluminum Content Inductively Coupled Plasma Atomic Emission Spectrometry
Malaysia Standards, Calcium Analysis in Solids
- MS 1466-1999 Method of test for linear thermal expansion of solid materials by thermomechanical analysis
API - American Petroleum Institute, Calcium Analysis in Solids
CENELEC - European Committee for Electrotechnical Standardization, Calcium Analysis in Solids
- HD 397-1979 Interpretation of the Analysis of Gases in Transformers and Other Oil-Filled Electrical Equipment in Service
Professional Standard - Non-ferrous Metal, Calcium Analysis in Solids
- YS/T 281.19-2011 Methods for chemical analysis of cobalt.Part 19:Determination of calcium,magnesium manganese,iron,cadmium,zinc content.Inductively coupled plasma atomic emission spectrometry
US-FCR, Calcium Analysis in Solids