ZH
RU
ES

time pressure

time pressure, Total:499 items.

In the international standard classification, time pressure involves: On-board equipment and instruments, Small craft, Electricity. Magnetism. Electrical and magnetic measurements, Pipeline components and pipelines, Valves, Fluid storage devices, Services, Kitchen equipment, Electronic display devices, Petroleum products in general, Quality, Refrigerating technology, Measurement of force, weight and pressure, Explosion protection, Fuels, Vocabularies, Protection against fire, Semi-manufactures of timber, Elements of buildings, Electrical accessories, Sterilization and disinfection, Installations in buildings, Protection against dangerous goods, Electrical engineering in general, Aerospace electric equipment and systems, Construction materials, Products of the textile industry, Medical equipment, Sports equipment and facilities, Switchgear and controlgear, Rubber and plastics products, Burners. Boilers, Electrical wires and cables, Chipless working equipment, Machine tool systems, Geology. Meteorology. Hydrology, Air quality, Plant and equipment for the food industry, Transformers. Reactors, Materials for aerospace construction, Aerospace fluid systems and components, Particle size analysis. Sieving, Petroleum, petroleum products and natural gas handling equipment, Reinforced plastics, Integrated circuits. Microelectronics, Water quality, Power stations in general, Shipbuilding and marine structures in general, Hydraulic energy engineering, Acoustics and acoustic measurements, Cargo equipment, Earthworks. Excavations. Foundation construction. Underground works, Fluid power systems, Internal combustion engines for road vehicles, Corrosion of metals, Insulation, Iron and steel products, Power transmission and distribution networks, Cellular materials, Inorganic chemicals, Ergonomics, Road vehicle systems.


U.S. Military Regulations and Norms, time pressure

CZ-CSN, time pressure

HU-MSZT, time pressure

ESDU - Engineering Sciences Data Unit, time pressure

  • ESDU 94015-1994 Surface pressure coefficient distributions for axisymmetric forecowls at zero incidence (M sub infinity less than or equal to 1.5).
  • ESDU 94014-1994 Wave drag coefficient for axisymmetric forecowls at zero incidence (M sub infinity less than or equal to 1.5).
  • ESDU 82026 D-1993 STRONG WINDS IN THE ATMOSPHERIC BOUNDARY LAYER. Part I: mean-hourly wind speeds
  • ESDU 82026 E-2002 Strong winds in the atmospheric boundary layer. Part 1: hourly-mean wind speeds.
  • ESDU 91014 A-1995 Maximum lift of wings with trailing-edge flaps at low speeds.
  • ESDU 87004 A-1989 CALCULATION OF EXCRESCENCE DRAG MAGNIFICATION DUE TO PRESSURE GRADIENTS AT HIGH SUBSONIC SPEEDS
  • ESDU 82028-1982 Pressure drag of spherically-blunted conical forebodies at zero incidence for Mach numbers of 3 and above.
  • ESDU 92031 A-1995 Maximum lift of wings with leading-edge devices and trailing-edge flaps deployed.
  • ESDU 84004 A-1984 Estimation of spillage drag for a wide range of axisymmetric intakes at M less than 1.
  • ESDU 80021 B-1989 Pressure drag of blunt forebodies at zero incidence for Mach numbers up to 10.
  • ESDU 77016 B-2007 The gravitational component of pressure gradient for two-phase gas or vapour/liquid flow through straight pipes.
  • ESDU 68047-1968 Straight pipes under internal pressure. Effect of bore eccentricity on maximum stress.
  • ESDU 94026 A-1995 Introduction to the estimation of the lift coefficients at zero angle of attack and at maximum lift for aerofoils with high-lift devices at low speeds.
  • ESDU 68048-1968 Straight pipes under internal pressure. Effect of initial non-circularity on maximum stress.
  • ESDU 86015-1986 FLUID TRANSIENTS IN PIPES Estimation of Maximum Pressures and Forces in Steam Lines
  • ESDU 86015 B-2007 Fluid transients in pipes. Estimation of maximum pressures and forces in steam lines.

United States Navy, time pressure

British Standards Institution (BSI), time pressure

  • BS EN ISO 14946:2001 Small craft - Maximum load capacity
  • BS EN ISO 14946:2021 Small craft. Maximum load capacity
  • BS EN 13673-1:2003 Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Determination of the maximum explosion pressure
  • BS EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances - Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
  • 18/30344538 DC BS ENISO 14946. Small craft. Maximum load capacity
  • BS EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar. Performance requirements
  • BS EN 13774:2003 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
  • 20/30414989 DC BS EN 15967. Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
  • BS EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
  • BS EN 15967:2022 Tracked Changes. Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
  • BS EN ISO 13934-1:2013 Textiles. Tensile properties of fabrics. Determination of maximum force and elongation at maximum force using the strip method
  • BS EN 60265-1:1998 Specification for high-voltage switches - Switches for rated voltages above 1 kV and less than 52 kV
  • BS EN 1866-2:2014 Mobile fire extinguishers. Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
  • BS EN 334:2005 Gas pressure regulators for inlet pressures up to 100 bar
  • BS EN 17527:2021 Helium cryostats. Protection against excessive pressure
  • BS EN 13673-2:2005 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Determination of the maximum rate of explosion pressure rise
  • BS EN ISO 7751:1997+A1:2011 Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to maximum working pressure
  • BS EN 50645:2017 Ecodesign requirements for small power transformers
  • BS EN 12007-5:2014 Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar. Service lines. Specific functional requirements
  • 20/30408162 DC BS EN 60152. Identification by hour numbers of the phase conductors of 3-phase electric systems
  • BS EN 88-1:2011 Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures up to and including 50 kPa
  • BS EN ISO 7751:2016 Tracked Changes. Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to maximum working pressure
  • 20/30392676 DC BS EN 17527. Helium cryostats. Protection against excessive pressure
  • BS EN ISO 12217-1:2002+A1:2009 Small craft - Stability and buoyancy assessment and categorization - Non-sailing boats of hull length greater than or equal to 6 m
  • BS EN 13785:2005+A1:2008 Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures
  • BS EN 1594:2009 Gas supply systems. Pipelines for maximum operating pressure over 16 bar. Functional requirements
  • BS EN 15776:2011 Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %
  • BS EN 50423-2:2005 Overhead electrical lines exceeding AC 1 kV up to and including AC 45 kV - Index of national normative aspects
  • BS EN 62006:2011 Hydraulic machines. Acceptance tests of small hydroelectric installations
  • BS EN 16129:2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
  • BS EN 88-1:2007 Pressure regulators and associated safety devices for gas appliances - Pressure regulators for inlet pressures up to and including 500 mbar
  • BS EN 1594:2013 Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
  • BS EN 15776:2022 Unfired pressure vessels. Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15%
  • BS EN 61936-1:2010 Power installations exceeding 1 kV a.c. Common rules

Association Francaise de Normalisation, time pressure

  • NF J95-055:2001 Small craft - Maximum load capacity.
  • NF J95-055*NF EN ISO 14946:2021 Small craft - Maximum load capacity
  • NF P23-501:1986 JOINERY PRODUCTS. FLAME PROTECTION AND FIRE STOP DOORSETS (1/4 H).
  • NF S66-702*NF EN 15967:2022 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
  • NF EN 15967:2022 Détermination de la pression maximale d'explosion et de la vitesse maximale de montée en pression des gaz et des vapeurs
  • NF E29-319*NF EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
  • NF E29-171:2009 Gas pressure regulators for inlet pressures up to 100 bar.
  • NF E29-171/IN1*NF EN 334/IN1:2009 Gas pressure regulators for inlet pressures up to 100 bar
  • NF EN 1775:2007 Alimentation en gaz - Tuyauteries de gaz pour les bâtiments - Pression maximale de service inférieure ou égale à 5 bar - Recommandations fonctionnelles
  • NF S66-702:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours.
  • NF EN ISO 7751:2017 Tuyaux et flexibles en caoutchouc et en plastique - Rapports des pressions d'épreuve et de rupture à la pression maximale de service
  • NF C52-629/A2*NF EN 50629/A2:2018 Energy performance of large power transformers (Um more than 36 kV or Sr more than or equal to 40 MVA)
  • NF G07-129-1*NF EN ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1 : determination of maximum force and elongation at maximum force using the strip method
  • NF S61-921-2*NF EN 1866-2:2014 Mobile fire extinguishers - Part 2 : requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
  • NF S66-254-2:2005 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2 : determination of the maximum explosion pressure rise.
  • NF EN 50708-3-1:2020 Transformateurs de puissance - Exigences européennes supplémentaires - Partie 3-1 : transformateurs de grande puissance
  • NF C52-645*NF EN 50645:2017 Ecodesign requirements for small power transformers
  • NF EN ISO 11747:2012 Riz - Détermination de la résistance à l'extrusion des grains de riz après cuisson
  • NF M50-005-1*NF EN 12007-1:2012 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1 : general functional requirements
  • NF EN 1594:2014 Systèmes d'alimentation en gaz - Canalisations pour pression maximale de service supérieure à 16 bar - Prescriptions fonctionnelles
  • NF T47-251*NF EN ISO 7751:2017 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure
  • NF C52-629/A1*NF EN 50629/A1:2016 Energy performance of large power transformers (Um > 36 kV or Sr > or = 40 MVA)
  • NF EN 12007-1:2012 Infrastructures gazières - Canalisations pour pression maximale de service inférieure ou égale à 16 bar - Partie 1 : exigences fonctionnelles générales
  • NF EN 62006:2011 Machines hydrauliques - Essais de réception des petits aménagements hydroélectriques
  • NF EN 88-1/IN1:2016 Régulateurs de pression et dispositifs de sécurité associés pour appareils à gaz - Partie 1 : régulateurs de pression pour pression amont inférieure ou égale à 50 kPa
  • NF E48-505:1988 Hydraulic fluid power. Cylinder 160 bar compact serie. Clevis bracket form B.
  • NF C52-708-3-1*NF EN 50708-3-1:2020 Power transformers - Additional European requirements - Part 3-1 : large power transformer - General requirements
  • NF EN 16898:2022 Équipements auxiliaires pour brûleurs à gaz et appareils à gaz - Filtres à gaz ayant une pression de service maximale inférieure ou égale à 600 kPa
  • NF EN 12007-5:2014 Infrastructures gazières - Canalisations pour pression maximale de service inférieure ou égale à 16 bar - Partie 5 : branchements - Recommandations fonctionnelles spécifiques
  • NF EN 12007-2:2012 Infrastructures gazières - Canalisations pour pression maximale de service inférieure ou égale à 16 bar - Partie 2 : exigences fonctionnelles spécifiques pour le polyéthylène (MOP inférieure ou égale à 10 bar)
  • NF D36-307/A2:2005 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures
  • NF M07-002*NF EN ISO 3405:2000 Petroleum products - Determination of distillation characteristics at atmospheric pressure
  • NF EN ISO 11592-1:2016 Petits navires - Détermination de la puissance maximale de propulsion en utilisant la vitesse de manoeuvre - Partie 1 : Navires d'une longueur de coque de moins de 8 m
  • NF D36-311*NF EN 16129:2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
  • NF C33-253:2006 Insulated cables for power systems - Single-core cables with polymeric insulation for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 525 kV).
  • NF M50-005-5*NF EN 12007-5:2014 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 5 : service lines - Specific functional requirements
  • NF EN 12007-3:2015 Infrastructures gazières - Canalisations pour pression maximale de service inférieure ou égale à 16 bar - Partie 3 : exigences fonctionnelles spécifiques pour l'acier
  • NF EN 3-8:2021 Extincteurs d'incendie portatifs - Partie 8 : exigences pour la construction, la résistance à la pression et les essais mécaniques pour extincteurs dont la pression maximale admissible est inférieure ou égale à 30 bar et qui sont conformes aux e...
  • NF EN 15001-1:2023 Infrastructures gazières - Canalisations d'installations de gaz avec une pression de service supérieure à 0,5 bar pour les installations industrielles et supérieure à 5 bar pour les installations industrielles et non industrielles (domestiques et...
  • NF E86-202:2011 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %.
  • NF E86-202/IN1*NF EN 15776/IN1:2016 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %
  • NF E86-202*NF EN 15776+A1:2016 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %
  • NF D36-307/A3:2009 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures

European Committee for Standardization (CEN), time pressure

  • EN ISO 14946:2021 Small craft - Maximum load capacity (ISO 14946:2021)
  • FprEN 16129 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
  • FprEN 16129-2021 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
  • EN 16129:2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures [Superseded: CEN EN 12864, CEN EN 12864
  • FprEN 15967-2021 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
  • EN 13673-1:2003 Determination of the maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 1: Determination of the maximum explosion pressure
  • prEN 334-1990 Gas pressure governors for inlet pressures up to 100 bar
  • EN 13774:2003 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements services
  • EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
  • EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
  • EN 12864:2001 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures (Incorporates Amendment
  • EN ISO 7751:1997/A1:2011 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure - Amendment 1 - Replacement of "design working pressure" by "maximum working pressure" throughout text (ISO 7751:1991/Amd 1:2011)
  • EN ISO 14946:2001 Small Craft - Maximum Load Capacity Incorporating Corrigendum October 2005; ISO 14946:2001
  • EN 12007-1:2012 Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements
  • EN 1594:2000 Gas Supply Systems - Pipelines for Maximum Operating Pressure Over 16 Bar - Functional Requirements
  • EN 1594:2009 Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements
  • EN 1594:2013 Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
  • EN 88-2:2007 Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
  • EN 88-2:2022 Safety and control devices for gas burners and gas burning appliances - Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
  • EN 12007-2:2000 Gas Supply Systems - Pipelines for Maximum Operating Pressure up to and Including 16 Bar - Part 2: Specific Functional Recommendations for Polyethylene (MOP up to and Including 10 Bar)
  • EN 1866-2:2014 Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
  • EN 15776:2011 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 % (Incorporates Amendment A1: 2015)
  • EN 15776:2022 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15 %

International Organization for Standardization (ISO), time pressure

  • ISO 14946:2001 Small craft - Maximum load capacity
  • ISO 14946:2021 Small craft - Maximum load capacity
  • ISO 15734:2001 Ships and marine technology - Hydrostatic release units
  • ISO 7751:1991/Amd 1:2011 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure - Amendment 1: Replacement of "design working pressure" by "maximum working pressure" throughout text
  • ISO 10133:1994 Small craft - Electrical systems - Extra-low-voltage d.c. installations
  • ISO 13934-1:2013 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
  • ISO 3213:1975 Polypropylene pipes; Reduction of permissible stress as a function of time and temperature

IT-UNI, time pressure

Danish Standards Foundation, time pressure

  • DS/EN ISO 14946/AC:2005 Small craft - Maximum load capacity
  • DS/EN ISO 14946:2001 Small craft - Maximum load capacity
  • DS/EN 16129:2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
  • DS/EN 12864/A3:2009 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures
  • DS/EN 12864/A2:2006 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures
  • DS/EN 12864/A1:2004 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures
  • DS/EN 12864:2003 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures
  • DS/EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
  • DS/EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
  • DS/EN ISO 7751/A1:2011 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure - Amendment 1: Replacement of ""design working pressure"" by ""maximum working pressure"" throughout text
  • DS/EN 13786+A1:2009 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
  • DS/EN 1775:2007 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
  • DS 423.26:1984 Testing of concrete. Hardened concrete. Compressive strength. Accelerated curing for 24 hours
  • DS/EN 62006:2011 Hydraulic machines - Acceptance tests of small hydroelectric installations

Japanese Industrial Standards Committee (JISC), time pressure

ZA-SANS, time pressure

  • SANS 14946:2008 Small craft - Maximum load capacity
  • SANS 12217-3:2008 Small craft - Stability and buoyancy assessment and categorization Part 3: Boats of hull length less than 6 m

RU-GOST R, time pressure

  • GOST R ISO 14946-2013 Small craft. Maximum load capacity
  • GOST 4.119-1984 Product quality index system. Compressors (air and gas driven ones) and refrigerating plants of refrigerating capacity exceeding 2.9 Kw (2500 kcal/h). Nomenclature of basic indices
  • GOST R 54823-2011 Pressure regulators and associated safety devices for gas appliances. Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar
  • GOST R 55025-2012 Power cables with plastic insulation for rated voltages from 6 up to and including 35 kV. General specifications
  • GOST 5761-2005 Valves for nominal pressure at most PN 250. General specifications
  • GOST 5761-1974 Globe valves Pnom 25 MPa (250 kgf/sq sm). General specifications
  • GOST 23089.10-1983 Integrated circuits. Method of measuring the operational amplifiers output voltage maximum build-up rate and time
  • GOST 21023-1975 Power transformers. Methods of measuring partial discharge characteristics during power frequency voltage testing
  • GOST 17245-1979 Soils. Method of laboratory determination of temporary resistance for single-exial compression
  • GOST R 57036-2016 Petroleum products. Determination of distillation characteristics at atmospheric pressure
  • GOST 26605-1993 Polymeric materials cellular flexible. Determination of stress-strain characteristics in compression and compression stress
  • GOST R ISO 24509-2021 Ergonomic design. A method for estimating minimum font size, providing legibility during reading, for people at any age

AT-ON, time pressure

  • ONORM E 1302-1974 Whitworth thread 3/16 inch limiting sizes and limiting gauges
  • OENORM EN ISO 14946:2021 Small craft - Maximum load capacity (ISO 14946:2021)
  • ONORM M 7355-1981 Small pressure vessels for compressed air; upto 10 bar operating pressure
  • ONORM B 2540-2000 Construction of water or steam pipelines under pressures above 25 bar and temperatures above 110 ℃ or under pressures above 0,5 bar and temperatures above 350℃

Korean Agency for Technology and Standards (KATS), time pressure

  • KS C 1204-2006 WATT-HOUR, VAR-HOUR AND MAXIMUN DEMAND INDICATORS FOR TELEMETERING
  • KS B 8213-2009(2019) Pressure regulators and associated safety devices for gas appliances－Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa
  • KS V ISO 14946:2005 Small craft－Maximum load capacity
  • KS C IEC 60152:2009 Identification by hour numbers of the phase conductors of 3-phase electric systems
  • KS M ISO 2556-2006(2016) Plastics－Determination of the gas transmission rate of films and thin sheets under atmospheric pressure－Manometric method
  • KS B 6217-2004 Small type seamless steel gas cylinders
  • KS R ISO 9457-2-2015(2020) Road vehicles－Metric starter motor pinions－Part 2：Pinions with 20° pressure angle

General Motors Corporation (GM), time pressure

CEN - European Committee for Standardization, time pressure

  • PREN 16129-2018 Pressure regulators@ automatic change-over devices@ having a maximum regulated pressure of 4 bar@ with a maximum capacity of 150 kg/h@ associated safety devices and adaptors for butane@ propane@ and their mixtures
  • EN 13673-2:2005 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise

SE-SIS, time pressure

PL-PKN, time pressure

  • PN M08501-1987 Means ot mechanization and auiomatization ot assembling Pneumatic presses Sizes
  • PN C01200-24-1988 Fire hazard and explosive Parameters of inflammability and explosion Determination of maximum explosion pressure and maximum rat? of pressure rise due to explosion for fibre-air mixtures
  • PN E05019-1991 Identification by hour numbers of the phase conductors of 3-phase electric systems
  • PN M73060-1990 Hydraulic and pneumatic power. O-rings. According to ISO. Dimensions and size designation

German Institute for Standardization, time pressure

  • DIN 53769-3:1988 Testing of glass fibre reinforced plastics pipes; determination of initial and long-term ring stiffness
  • DIN EN 16129:2018 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures; German and English version prEN 16129:20
  • DIN EN ISO 14946:2001 Small craft - Maximum load capacity (ISO 14946:2001); German version EN ISO 14946:2001
  • DIN EN ISO 14946:2021-09 Small craft - Maximum load capacity (ISO 14946:2021); German version EN ISO 14946:2021
  • DIN EN ISO 14946:2019 Small craft - Maximum load capacity (ISO/DIS 14946:2018); German and English version prEN ISO 14946:2018
  • DIN 3386:2012-10 Gasfilters having a maximum working pressure of less or equal to 5 bar - Requirements and testing / Note: DIN 3386 (1973-10) remains valid alongside this standard until 2013-03-31.
  • DIN EN 15967:2020 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours; German and English version prEN 15967:2020
  • DIN EN 15967:2022 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
  • DIN 3386:2012 Gasfilters having a maximum working pressure of less or equal to 5 bar - Requirements and testing
  • DIN EN 15967:2022-03 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours; German version EN 15967:2022
  • DIN EN 13774:2013-05 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements; German version EN 13774:2013
  • DIN EN 1775:2007-10 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations; German version EN 1775:2007
  • DIN EN 15967:2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours; German version EN 15967:2011
  • DIN EN ISO 14946:2021 Small craft - Maximum load capacity (ISO 14946:2021); German version EN ISO 14946:2021
  • DIN EN ISO 7751:2017-06 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016); German version EN ISO 7751:2016
  • DIN 33411-3:1986-12 Human physical strength; maximum static action moments applied by male operators when actuating hand-wheels
  • DIN EN 13673-2 Berichtigung 1:2007 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise; German version EN 13673-2:2005, Corrigenda to DIN EN 13673-2:2005-12
  • DIN EN 50708-3-3:2023-11 Power transformers - Additional European requirements - Part 3-3: Large power transformer - Accessories; German and English version prEN 50708-3-3:2023 / Note: Date of issue 2023-10-27
  • DIN EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements; German version EN 13774:2013
  • DIN EN 1594:2009 Gas supply systems - Pipelines for maximum operating pressure over 16 bar - Functional requirements; English version of DIN EN 1594:2009-06
  • DIN EN 12007-3:2000 Gas supply systems - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional recommendations for steel; German version EN 12007-3:2000
  • DIN EN 50708-3-1:2023-08 Power transformers - Additional European requirements - Part 3-1: Large power transformer - General requirements; German version EN 50708-3-1:2020 / Note: DIN EN 50629 (2019-03) remains valid alongside this standard until 2023-05-22.
  • DIN EN 1866-2:2014 Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1; German ver
  • DIN 18889:1956-11 Coal-fired Water-heater with Storage Boiler, without Pressure for Test Pressure of 1 Atmosphere; Terms employed, Construction, Quality, Capacity and Testing
  • DIN 51640:1989 Testing of liquified petroleum gases; calculation of vapour pressure at 40 °C and 70 °C
  • DIN EN 15776:2011 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure parts constructed from cast iron with an elongation after fracture equal or less than 15 %; German version EN 15776:2011
  • DIN EN 15776:2022-09 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessels parts constructed from cast iron with an elongation after fracture equal or less than 15 %; German version EN 15776:2022
  • DIN EN ISO 2556:2001 Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method (ISO 2556:1974); German version EN ISO 2556:2000
  • DIN EN 13673-2:2005 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours - Part 2: Determination of the maximum rate of explosion pressure rise; English version of DIN EN 13673-2:2005
  • DIN 18863:2003 Equipment for commercial kitchens - Pressure steam cookers - Requirements and testing

AENOR, time pressure

  • UNE-EN 16129:2014 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures
  • UNE 60411:2009 Gaseous fuels. Pressure regulator with a maximum inlet pressure (MOPe) greater than 0,4 bar and up to 5 bar and a maximum outlet pressure (MOPs) up to 0,4 bar.
  • UNE 60411:2009/1M:2012 Gaseous fuels. Pressure regulator with a maximum inlet pressure (MOPe) greater than 0,4 bar and up to 5 bar and a maximum outlet pressure (MOPs) up to 0,4 bar.
  • UNE 60631-1:2014 Compressed natural gas filling stations. Part 1: Stations with supply capacity above 20 m3/h.
  • UNE-EN ISO 14946:2002 Small craft - Maximum load capacity. (ISO 14946:2001)
  • UNE-EN 13774:2013 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
  • UNE-EN 1775:2008 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
  • UNE 60402-2:2008/2M:2013 Gaseous fuels. Pressure regulator with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,05 bar. Part 2: Regulator with a MOP greater than 150 mbar, with an incorporated minimum low pressure cut-off safety valve, with a maximum pressure safety valve an
  • UNE 60402-2:2008/1M:2012 Gaseous fuels. Pressure regulator with an inlet MOP up to 0,4 bar and an outlet MOP up to 0,05 bar. Part 2: Regulator with a MOP greater than 150 mbar, with an incorporated minimum low pressure cut-off safety valve, with a maximum pressure safety valve an
  • UNE 60402-2:2008 Gaseous fuels. Pressure regulator with an inlet MOP up to 0,4 bar and an oulet MOP up to 0,05 bar. Part 2: Regulator with a MOP greater than 150 mbar, with an incorporated minimum low pressure cut-off safety valve, with a maximum pressure safety valve and
  • UNE-EN 62006:2011 Hydraulic machines - Acceptance tests of small hydroelectric installations
  • UNE 60311:2015 Gas supply pipelines for maximum operating pressure up to and including 5 bar.
  • UNE-EN ISO 7751:2017 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:2016)

BE-NBN, time pressure

Taiwan Provincial Standard of the People's Republic of China, time pressure

  • CNS 14967-2006 Miniature pressure vessels
  • CNS 11441-1985 Watt-Hour, Var-Hour and Maximum Demand Imdicators for Telemetering
  • CNS 11444-1985 Method of Test for Watt-Hour, Var-Hour and Maximum Demand indicators for Telemetering

ES-UNE, time pressure

  • UNE-EN ISO 14946:2022 Small craft - Maximum load capacity (ISO 14946:2021)
  • UNE-EN 15967:2022 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours (Endorsed by Asociación Española de Normalización in March of 2022.)
  • UNE 60411:2019 Pressure regulators for gas receiving installations with a maximum inlet operating pressure (MOPe) greater than 0,4 bar and up to 5 bar and a maximum outlet operating pressure (MOPs) up to 0,4 bar.
  • UNE 60411:2019/1M:2021 Pressure regulators for gas receiving installations with a maximum inlet operating pressure (MOPe) greater than 0,4 bar and up to 5 bar and a maximum outlet operating pressure (MOPs) up to 0,4 bar.
  • UNE-EN 50645:2018 Ecodesign requirements for small power transformers
  • UNE 60311:2022 Gas supply pipelines for maximum operating pressure up to and including 5 bar.
  • UNE 60311:2022/1M:2023 Gas supply pipelines for maximum operating pressure up to and including 5 bar.
  • UNE-EN 50708-3-1:2020 Power transformers - Additional European requirements: Part 3-1 Large power transformer - General requirements
  • UNE 60404-2:2010/1M:2021 Gaseous fuels. Regulation pressure and/or measurement packages with a maximum operating pressure up to 5 bar. Part 2: Regulation packages to place in small chest built in a public way with a nominal volume of flow equivalent up to 50 m3(n)/h of natural...
  • UNE-EN 15776:2023 Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed from cast iron with an elongation after fracture equal or less than 15 %

Lithuanian Standards Office , time pressure

  • LST EN 12864-2002 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures
  • LST EN 12864-2002/A1-2003 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures
  • LST EN 12864-2002/A2-2005 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures
  • LST EN 12864-2002/A3-2009 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures
  • LST EN ISO 14946:2021 Small craft - Maximum load capacity (ISO 14946:2021)
  • LST EN ISO 14946:2002 Small craft - Maximum load capacity (ISO 14946:2001)
  • LST EN ISO 14946:2002/AC:2006 Small craft - Maximum load capacity (ISO 14946:2001)
  • LST EN 15967-2011 Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
  • LST EN 13774-2004 Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements
  • LST EN 13786-2004+A1-2009 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
  • LST EN 1775-2007 Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
  • LST EN 1866-2-2014 Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1
  • LST EN ISO 7751:2001/A1:2011 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure - Amendment 1 - Replacement of "design working pressure" by "maximum working pressure" throughout text (ISO 7751:1991/Amd.1:2011)
  • LST EN ISO 7751:2001 Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure (ISO 7751:1991)
  • LST EN 16129-2013 Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures

Zhejiang Provincial Standard of the People's Republic of China, time pressure

Group Standards of the People's Republic of China, time pressure

  • T/ZHAS 19-2023 Large capacity pressure cooker
  • T/CFA 020202031-2021 Spherical atmospheric pressure riser sleeve
  • T/SDMT 0003-2023 Electro-hydraulic system for CNC Die-cushion in Heavy-duty Press
  • T/CCIAA 19-2021 Technical code for coke oven sole flue pressure determination
  • T/CPSS 1008-2020 Voltage Dip and Short Interruption Immunity Testing Method for Low Voltage Electrical Equipment
  • T/SMA 0041-2023 Operation specification for the internal inspection robots used in large power transformers

CH-SNV, time pressure

American Society for Testing and Materials (ASTM), time pressure

  • ASTM D5482-99 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method-Atmospheric)
  • ASTM D5482-07 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Methodx2014;Atmospheric)
  • ASTM D5482-07(2013) Standard Test Method for Vapor Pressure of Petroleum Products (Mini Methodmdash;Atmospheric)
  • ASTM F660-83(1993) Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
  • ASTM F660-83(2019) Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
  • ASTM D3631-99(2011) Standard Test Methods for Measuring Surface Atmospheric Pressure
  • ASTM G202-09 Standard Test Method for Using Atmospheric Pressure Rotating Cage
  • ASTM G202-12 Standard Test Method for Using Atmospheric Pressure Rotating Cage
  • ASTM E918-83(2005) Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
  • ASTM D7854-13 Standard Test Method for Carbon Black-Void Volume at Mean Pressure

North Atlantic Treaty Organization Standards Agency, time pressure

FI-SFS, time pressure

Anhui Provincial Standard of the People's Republic of China, time pressure

  • DB34/T 3887-2021 7 × 24 hours government service hall construction and operation specification
  • DB34/T 3572-2019 Technical specification for vacuum pressure impregnation of large superconducting magnets

GM North America, time pressure

  • GM3622M-1993 Adhesion Requirements of Pressure Sensitive Adhesive Coated Parts (Minimal Stress) Revision A
  • GM GM3622M-1993 Adhesion Requirements of Pressure Sensitive Adhesive Coated Parts (Minimal Stress)

Society of Automotive Engineers (SAE), time pressure

  • SAE ARP6249-2020 Hydraulic Pump Minimum Inlet Pressure Test
  • SAE AMS3267/4B-2003 Sealing Compound, Low Adhesion, Corrosion Inhibiting, 9,000 to 14,000 Poises (900 to 1400 Pa⋅s), 2 Hour Application Time (B-2)
  • SAE AMS3267/2B-2003 Sealing Compound, Low Adhesion, Corrosion Inhibiting, 9,000 to 14,000 Poises (900 to 1400 Pa⋅s), 1/2 Hour Application Time (B-1/2)
  • SAE ARP1323A-1990 Type Measurements of Airplane Interior Sound Pressure Levels During Cruise
  • SAE J1754-1-2013 Hose Assemblies, Rubber, Hydraulic, 21 MPa Maximum Working Pressure Procurement Document

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, time pressure

  • GB/T 16426-1996 Determination for maximum explosion pressure and maximum rate of pressure rise of dust cloud
  • GB/T 21579-2008 Dangerous goods.Test method of time/pressure
  • GB 8599-2023 Technical requirements for large pressure steam sterilizers
  • GB/T 3411.1-2009 Instrument for dam monitoring-Pore water pressure transducer-Part1:Vibrating wire pore water pressure transducer
  • GB/T 24179-2009(英文版) Metallic materials—Residual stress determination—The indentation straingage method
  • GB/T 5351-1985 Test method for short-time hydraulic failure pressure of fiber-reinforced thermosetting plastic pipe
  • GB/T 5351-2005 Fiber-reinforced thermosetting plastic composites pipe-Determination of short-time hydraulic failure pressure
  • GB 19521.14-2004 Safety code for the inspection of medium and minitype receptacles for dangerous goods

RO-ASRO, time pressure

IETF - Internet Engineering Task Force, time pressure

  • RFC 2349-1998 TFTP Timeout Interval and Transfer Size Options (Obsoletes: 1784; Updates: 1350)

National Fire Protection Association (NFPA), time pressure

Professional Standard - Medicine, time pressure

Professional Standard - Aviation, time pressure

  • HB 5944.3-1986 Aviation pressure gauge small pressure gauge type and basic size
  • HB 5652.2-1984 Climate extremes Atmospheric pressure extremes

TR-TSE, time pressure

  • TS 210-1965 IDENTIFICATION BY HOUR NUMBERS OF THE PHASE CONDUCTORS OF 3—PHASE ELECTRIC SYSTEMS

International Electrotechnical Commission (IEC), time pressure

  • IEC 60152:1963 Identification by hour numbers of the phase conductors of 3-phase electric systems
  • IEC 62006:2010 Hydraulic machines - Acceptance tests of small hydroelectric installations

Aeronautical Radio Inc., time pressure

PT-IPQ, time pressure

  • NP 4259-1999 Solid fuels. Cokes(Particle size greather than 20mm). Determination of mechanical strength

Professional Standard - Special Equipment Specification, time pressure

  • TSG R6003-2006 Examination Requirements of Online Leak Sealing Operator for Pressure Vessel and Pressure Pipe

WRC - Welding Research Council, time pressure

  • BULLETIN 69-1961 THE EFFECTS OF INTERNAL PRESSURE ON THIN-SHELL PRESSURE VESSEL HEADS WRINKLING OF A LARGE THIN CODE HEAD UNDER INTERNAL PRESSURE BIAXIAL STRESS CRITERIA FOR LARGE LOW-PRESSURE TANKS

National Aeronautics and Space Administration (NASA), time pressure

  • NASA NACA-RM-A54J12-1955 Pressure distributions on triangular and rectangular wings to high angles of attack - Mach numbers 2.46 and 3.36
  • NASA NACA-RM-L52K06-1952 Pressure distribution and pressure drag for a hemispherical nose at Mach numbers 2.05, 2.54, and 3.04
  • NASA NACA-RM-A55K09-1956 Force, moment, and pressure-distribution characteristics of rectangular wings at high angles of attack and supersonic speeds
  • NASA NACA-TN-3547-1955 Aerodynamic characteristics of a small-scale shrouded propeller at angles of attack from 0 degrees to 90 degrees
  • NASA-TP-3358 SUPP-1993 Experimental cavity pressure measurements at subsonic and transonic speeds Static-pressure results Includes Supplement
  • NASA NACA-RM-A50E02-1950 Pressure-distribution and ram-recovery characteristics of NACA submerged inlets at high subsonic speeds

NL-NEN, time pressure

  • NEN 3286-1967 Identification by hour numbers of the phase conductors of 3-phase electric systems

IN-BIS, time pressure

GM Europe, time pressure

  • GME GMI L-9A-24-2007 Hydraulic Rack-and-Pinion Power Steering - Maximum Steering Pressure (English/German; This standard may be applied only for current projects incl. Global Epsilon e (37##), Global Delta d (34##) and S-4470/50. It is Superceded for all future projects and r

US-FCR, time pressure

Canadian Standards Association (CSA), time pressure

  • CSA C802.3-01-2001 Pertes Maximales Pour Les Transformateurs De Puissance Premiere Edition; Mise A Jour No 1
  • CSA/AM CSA/ANSI Z21.10.3-2004 Gas Water Heaters; Volume III - Storage Water Heaters with Input Ratings Above 75,000 Btu per Hour, Circulating and Instantaneous Third Edition; CSA 4.3-2004
  • CSA 4.3-2004 Gas Water Heaters Volume III, Storage Water Heaters, with Input Ratings Above 75,000 Btu per Hour, Circulating and Instantaneous Third Edition; CSA/ANSI Z21.10.3-2004

Professional Standard - Machinery, time pressure

Professional Standard - Energy, time pressure

American Society of Mechanical Engineers (ASME), time pressure

Professional Standard - Military and Civilian Products, time pressure

  • WJ/Z 384-1995 Processing time quota for powerful spinning of rockets
  • WJ/Z 375-1995 Cold Extrusion Die Pressure Backing Plate for Small Caliber Projectile Projectile

National Metrological Technical Specifications of the People's Republic of China, time pressure

  • JJF 1789-2019 Program of Pattern Evaluation of Pressure Transmitters
  • JJF 1413-2013 Program of Pattern Evaluation of Tyre Pressure Gauges
  • JJF 1418-2013 Program of Pattern Evaluation of Pressure Controller
  • JJF 1511-2015 Program of Pattern Evaluation of the Record Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges
  • JJF 1416-2013 Program of Pattern Evaluation of Digital Pressure Gauges
  • JJF 1640-2017 Program of Pattern Evaluation for Piezoresistive Pressure Sensors(Static)
  • JJF 1415-2013 Program of Pattern Evaluation of Elastic Element Pressure Gauges, Pressure-Vacuum Gauges and Vacuum Gauges for General Use
  • JJF 1509-2015 Program of Pattern Evaluation of Pressure Transducer

工业和信息化部/国家能源局, time pressure

Professional Standard - Aerospace, time pressure

  • QJ 1047-1986 Solid rocket motor pressure-time, thrust-time data processing specification
  • QJ 1047-1992 Solid rocket motor pressure-time, thrust-time data processing specification

American Gas Association, time pressure

  • AGA B109.1-2000 Diaphragm Type Gas Displacement Meters (under 500 Cubic Feet Per Hour Capacity) Fourth Edition; XQ0008
  • AGA B109.2-2000 Diaphragm Type Gas Displacement Meters (500 Cubic Feet per Hour Capacity and over) Fourth Edition; XQ0009

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., time pressure

SAE - SAE International, time pressure

  • SAE AMS3267/3A-1992 Sealing Compound@ Low Adhesion@ Corrosion Inhibiting 200 to 600 Poises (20 to 60 Pa.s)@ 2 Hour Application Time (A-2)
  • SAE AMS3267/3B-2011 Sealing Compound@ Low Adhesion@ Corrosion Inhibiting 200 to 600 Poises (20 to 60 Pa?s)@ 2 Hour Application Time (A-2)

American National Standards Institute （ANSI), time pressure

  • ANSI B109.2-2000 Diaphragm-Type Gas Displacement Meters (500 Cubic Feet Per Hour Capacity and Over)
  • ANSI Z21.10.3-2004 Gas Water Heaters, Vol. III, Storage Water Heaters with Input Ratings Above 75,000 Btu Per Hour, Circulating and Instantaneous
  • ANSI/ASTM D1599:1999 Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings

Professional Standard - Meteorology, time pressure

  • QX/T 220-2013 Technical requirements for metrology laboratory of atmospheric pressure

YU-JUS, time pressure

  • JUS M.E2.511-1986 Pressure Vessels for liquefied atmospheric gases. Torrns and definitions

Association of German Mechanical Engineers, time pressure

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, time pressure

  • GB/T 9574-2017 Rubber and plastics hoses and hose assemblies—Ratios of proof and burst pressure to maximum working pressure

Military Standard of the People's Republic of China-General Armament Department, time pressure

  • GJB 7950-2012 Man hours and minimum manpower unit of ordnance equipment maintenance
  • GJB 736.16-1994 Pyrotechnics Test Method Ignition Pressure-Time Curve Determination
  • GJB 2533-1995 Allowable limit of cabin air pressure during submarine torpedo launch
  • GJB/J 2891-1997 Static pressure calibration procedures for atmospheric data testing systems

Professional Standard - Aquaculture, time pressure

  • SC/T 6024-2003 Sterilizing device using pressure steam for small package food

European Committee for Electrotechnical Standardization（CENELEC）, time pressure

  • EN 50645:2017 Ecodesign requirements for small power transformers
  • EN 62006:2011 Hydraulic machines - Acceptance tests of small hydroelectric installations
  • EN 50708-3-1:2020 Power transformers - Additional European requirements: Part 3-1 Large power transformer - General requirements
  • FprEN 50708-3-1 Power transformers - Additional European requirements - Part 3-1: Large power transformer - General requirements

Defense Logistics Agency, time pressure

  • DLA MS27237 REV F-2007 SHOULDER, SWIVEL FLANGE, ADAPTER, HOSE TO TUBE, HYDRAULIC FUEL AND OIL LINES, 1/2 THROUGH 3 IN. TUBING SIZES

IL-SII, time pressure

  • S.I.740.3-1970 CARTRIDGE FUSE LINKS FOR MINIATURE FUSES: FUSE LINKS 20 mm x 5 mm, TIME-LAG, LOW-BREAKING CAPACITY.

AT-OVE/ON, time pressure

  • OVE EN IEC 60152:2020 Identification by hour numbers of the phase conductors of 3-phase electric systems (IEC 3/1459/CDV) (english version)

未注明发布机构, time pressure

  • BS 4161-3:1989(1999) Gas meters Part 3 : Specification for diaphragm meters of 6 cubic metres (or 212 cubic feet) per hour rating for working pressures up to 50 mbar

Standard Association of Australia （SAA）, time pressure

  • RUL PE.12-2004 Rulings to pressure equipment Standards - Ruling 12: Minimum nominal thickness of pressure parts (AS 1210-1997)
  • MP 88-2000 Evolution of Australian Standard for pressure vessel steel plate

VN-TCVN, time pressure

  • TCVN 3790-2008 Petroleum products.Test method for vapor pressure (Mini method.atmospheric)

CU-NC, time pressure

  • NC 81-36-1987 Sugar Industry. Barometric Condensers. Quality Specifications

Underwriters Laboratories (UL), time pressure

Indonesia Standards, time pressure

  • SNI IEC 62006:2013 Hydraulic machines - Acceptance tests of small hydroelectric installations

GB-REG, time pressure

NO-SN, time pressure

  • NS 3675-1987 Concrete testing - Hardened concrete - Compressive strength after accelerated curing for 24 hours

TH-TISI, time pressure

  • TIS 121.9-2009 Standard test methods for tex tiles.part 9: tensile properties of fabrics.determination of maximum force and elongation at maximum force using the strip method

KR-KS, time pressure

  • KS M ISO 3405-2016 Petroleum products — Determination of distillation characteristics at atmospheric pressure

Institute of Electrical and Electronics Engineers (IEEE), time pressure

  • IEEE Std C57.12.10/COR 1-2012 Standard Requirements for Liquid-Immersed Power Transformers Corrigendum 1: Correction of 5.1.9 Sudden Pressure Relay

GOSTR, time pressure

  • GOST 26605-2017 Cellular flexible polymeric materials. Determination of stress-strain characteristics in compression and compression stress

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, time pressure

  • PREN 3351-1988 Titanium Alloy TI-P68 Solution Treated and Aged Rm Greater Than or Equal to 1000 MPa Forgings De Less Than or Equal to 150 mm
  • PREN 3466-1988 Titanium Alloy TI-P68 Solution Treated and Aged Rm Greater Than or Equal to 1000 MPa Bar for Machining De Less Than or Equal to 150 mm
  • PREN 3459-1988 Aerospace Series Titanium Alloy TI-P68 Solution Treated and Aged Rm Greater Than or Equal to 1030 MPa Plate 6 Less Than a Less Than or Equal to 50 mm Issue P 1

ES-AENOR, time pressure

  • UNE 21-175 Pt.1-1992 Electrical test methods for electric cables. Part 1: Electrical tests for cables, cords and wires, for votages up to and including 450/750 V

  Pressure during pressing, pressure fluctuation, pressure in liquid phase, Pressure during mass spectrometry, pressure in liquid phase, Capacitor pressure, water pressure, time pressure, pressure at saturated vapor pressure.

 



Copyright ©2007-2023 ANTPEDIA, All Rights Reserved