ZH
RU
ES

Environmental Sampling Instruments

Environmental Sampling Instruments, Total:295 items.

In the international standard classification, Environmental Sampling Instruments involves: Air quality, TESTING, Water quality, Nuclear energy engineering, Environmental testing, Occupational safety. Industrial hygiene, Vocabularies, Optical equipment, Analytical chemistry, Soil quality. Pedology, Protection against fire, Ergonomics, Measurement of fluid flow, Environmental protection, Shipbuilding and marine structures in general, Alarm and warning systems, Radiation protection, Radiation measurements, Raw materials for rubber and plastics, Electrical engineering in general, Electrical equipment for working in special conditions, Biology. Botany. Zoology, Mechanical testing, Applications of information technology, Aerospace electric equipment and systems, Characteristics and design of machines, apparatus, equipment, Microbiology, Standardization. General rules.

CU-NC, Environmental Sampling Instruments

NC 93-02-105-1985 Standards System for Environmental Protection. Atmosphere. Instruments for Air Sampling in Human Settlements. General Technical Requirements

German Institute for Standardization, Environmental Sampling Instruments

DIN EN 17805:2022 Water sampling for capture of macrobial environmental DNA in aquatic environments; German and English version prEN 17805:2021
DIN EN 17805:2022-01 Water sampling for capture of macrobial environmental DNA in aquatic environments; German and English version prEN 17805:2021 / Note: Date of issue 2021-12-10
DIN EN 17346:2020-08 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers; German version EN 17346:2020
DIN EN ISO 5667-14:2016-12 Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling (ISO 5667-14:2014); German version EN ISO 5667-14:2016
DIN 12473-1:1976 Laboratory glassware; gas sampling tubes with straight bore stopcocks
DIN 12473-2:1976 Laboratory glassware; gas sampling tubes with V-bore stopcocks
DIN CEN/TS 16817-1:2016-01*DIN SPEC 33971:2016-01 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1: Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler; German version CEN/TS 16817-1:2015
DIN EN ISO 7726:2021-03 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998); German version EN ISO 7726:2001
DIN ISO 10109-12:2005 Optics and optical instruments - Environmental requirements - Part 12: Conditions of transport for optical instruments (ISO 10109-12:2004)
DIN EN 13528-3:2004-04 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance; German version EN 13528-3:2003
DIN EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
DIN EN 12305:1998-02 Biotechnology - Modified organisms for application in the environment - Guidance for the sampling strategies for deliberate releases of genetically modified plants; German version EN 12305:1997
DIN ISO 10109-11:2002 Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use (ISO 10109-11:2001)
DIN EN 13528-1:2002-12 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements; German version EN 13528-1:2002
DIN EN ISO 7726:2023-08 Ergonomics of the thermal environment - Instruments for measuring and monitoring physical quantities (ISO/DIS 7726:2023); German and English version prEN ISO 7726:2023 / Note: Date of issue 2023-06-30*Intended as replacement for DIN EN ISO 7726 (2021-03).

Standard Association of Australia （SAA）, Environmental Sampling Instruments

AS 3580.6.1:2023 Methods for sampling and analysis of ambient air, Method 6.1: Determination of ozone — Direct-reading instrumental method
AS 3580.5.1:2023 Methods for sampling and analysis of ambient air, Method 5.1: Determination of oxides of nitrogen — Direct-reading instrumental method
AS 3580.4.1:2023 Methods of sampling and analysis of ambient air, Method 4.1: Determination of sulfur dioxide — Direct reading instrumental method
AS 3580.7.1:2023 Methods for sampling and analysis of ambient air, Method 7.1: Determination of carbon monoxide — Direct-reading instrumental method
AS 3580.6.1:1990 Methods for sampling and analysis of ambient air - Determination of ozone - Direct-reading instrumental method
AS 3580.4.1:2008 Methods of sampling and analysis of ambient air - Determination of sulfur dioxide - Direct reading instrumental method
AS/NZS 3580.9.7:2009
AS 3580.6.1:2011
AS 3580.9.10:2017 Methods for sampling and analysis of ambient air, Method 9.10: Determination of suspended particulate matter — PM 2. low volume sampler — Gravimetric method
AS 3580.9.9:2017 Methods for sampling and analysis of ambient air, Method 9.9: Determination of suspended particulate matter — PM 10 low volume sampler — Gravimetric method
AS/NZS 3580.14:2014
AS 3580.7.1:2011
AS 3580.5.1:2011
AS 3580.7.1:2011/Amdt 1:2012
AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
AS/NZS 3580.9.12:2022 Methods for sampling and analysis of ambient air, Method 9.12: Determination of suspended particulate matter — PM2.5 beta attenuation monitors
AS/NZS 3580.9.11:2022 Methods for sampling and analysis of ambient air, Method 9.11: Determination of suspended particulate matter — PM10 beta attenuation monitors
AS/NZS 3580.9.6:2015
AS 3580.8.1:1990 Methods for sampling and analysis of ambient air - Determination of hydrogen sulfide - Automatic intermittent sampling - Gas chromatographic method
AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
AS/NZS 3580.11.1:2013
AS/NZS 3580.9.17:2018 Methods for sampling and analysis of ambient air, Method 9.17: Demonstration of equivalence for ambient particulate matter monitoring methods
AS/NZS 3580.9.9:2006 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) low volume sampler - Gravimetric method
AS/NZS 3580.9.10:2006 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM (sub)2.5(/sub) low volume sampler - Gravimetric method
AS 3580.3.1:1990 Methods for sampling and analysis of ambient air - Determination of acid gases - Titrimetric method
AS/NZS 3580.15:2014
AS 3640:2004 Workplace atmospheres - Method for sampling and gravimetric determination of inhalable dust
AS/NZS 3580.12.1:2001 Methods for sampling and analysis of ambient air - Determination of light scattering - Integrating nephelometer method
AS 3580.2.2:1990 Methods for sampling and analysis of ambient air - Preparation of reference test atmospheres - Compressed gas method
AS/NZS 3580.9.15:2014
AS/NZS 3580.10.1:2016 Methods for sampling and analysis of ambient air, Method 10.1: Determination of particulate matter — Deposited matter — Gravimetric method
AS/NZS 3580.12.1:2015 Methods for sampling and analysis of ambient air, Method 12.1: Determination of light scattering — Integrating nephelometer method
AS/NZS 3580.2.2:2016 Methods for sampling and analysis of ambient air, Method 2.2: Preparation of reference test atmospheres — Compressed gas method
AS/NZS 3580.9.11:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 beta attenuation monitors
AS 3580.7.1:1992 Methods for sampling and analysis of ambient air - Determination of carbon monoxide - Direct-reading instrumental method
AS 3580.9.8:2001 Methods for sampling and analysis of ambient air Method 9.8: Determination of suspended particulate matter--PM continuous direct mass method using a tapered element oscillating microbalance analyser
AS 2365.2:1993 Methods for the sampling and analysis of indoor air - Determination of carbon monoxide - Direct-reading portable instrument method
AS 3580.9.8:2022 Methods for sampling and analysis of ambient air, Method 9.8: Determination of suspended particulate matter — PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
AS/NZS 3580.9.12:2013

Association of German Mechanical Engineers, Environmental Sampling Instruments

VDI 3869 Blatt 4-2012 Measurement of ammonia in ambient air - Sampling with diffusive samplers - Photometric or ion chromatographic analysis
VDI 2463 Blatt 8-2014 Particulate matter measurement - Determination of suspended particulate matter in ambient air and indoor air - Non-fractioning sampling system for low-volume samplers (LVS)
VDI 2463 Blatt 7-2014 Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)
VDI 2119-2013 Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration
VDI 3869 Blatt 3-2010 Measurement of ammonia in ambient air - Sampling with diffusion separators (denuders) - Photometric or ion chromatographic analysis

Professional Standard - Agriculture, Environmental Sampling Instruments

空气和废气监测分析方法 7.3.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 2 Sampling Instrument Selection
空气和废气监测分析方法 7.3.4-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 4 Sampling Time Sampling Period and Sampling Requirements
HJ 759-2023 Determination of 65 Volatile Organic Compounds in Ambient Air Tank Sampling/Gas Chromatography-Mass Spectrometry
空气和废气监测分析方法 7.3.5-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 5 Sample Storage and Transportation
空气和废气监测分析方法 7.3.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection Three Filter Membrane Selection
空气和废气监测分析方法 7.3.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection Point and Layout Principle

RU-GOST R, Environmental Sampling Instruments

GOST R ISO 16107-2009 Workplace atmospheres. Protocol for evaluating the performance of diffusive samplers
GOST R EN 838-2010 Workplace atmospheres. Diffusive samplers for the determination of gases and vapours. Requirements and test methods
GOST R 54437-2011 Requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for resistance to air pressure tests
GOST R 54437-2011(2019) Requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for resistance to air pressure tests
GOST R 51499-1999 Environmental dynamic testing for machines, instruments and other articles. Vibration. Time-history method
GOST R 54436-2011 Requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (with load) for humidity endurance cyclic tests
GOST R 54436-2011(2019) Requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (with load) for humidity endurance cyclic tests
GOST R IEC 60068-3-8-2015 Environmental dynamic testing for machines, instrument and other articles. Selecting amongst vibration tests
GOST R IEC 61241-1-1-1999 Electrical apparatus for use in the presence of combustible dust. Part 1-1. Electrical apparatus protected by enclosures and surface temperature limitation. Specification for apparatus
GOST R 51804-2001 Environment, stability test methods for machines, instruments and other industrial products. Combined tests
GOST R IEC 61241-3-1999 Electrical apparatus for use in the presence of combustible dust. Part 3. Classification of areas
GOST IEC 60068-2-57-2016 Environmental dynamic testing for machines, instrument and other articles. Vibration. Time-history and sine-beat method
GOST R IEC 61241-18-2009 Electrical apparatus for use in the presence of combustible dust. Part 18. Protection by encapsulation «mD»
GOST R IEC 61241-14-2008 Electrical apparatus for use in the presence of combustible dust. Part 14. Selection and installation
GOST 31418-2010 Environmental dynamic test methods for machines, instrument and other technical articles. Shock tests with shock response spectrum synthesis
GOST R 51368-2011 Climatic environment endurance test methods for machines, instruments and other industrial products. Test for stability influence of temperature
GOST R 51684-2000 Climatic environment stability test methods of machines, instruments and other industrial products. Test for low air pressure
GOST R 51909-2002 Environment stability test methods for machines, instruments and other industrial products. Tests for transportation and storage
GOST 30630.1.8-2002 Test methods for resistance to environmental factors of machines, instruments and other articles. Time-history vibration tests
GOST 31419-2010 Environmental dynamic test methods for machines, instruments and other technical articles. Mixed mode vibration tests
GOST R 52561-2006 Mechanical environment stability test methods for machines, instruments and other industrial products. Test methods for influence of shocks by free fall, shocks by drop on account of topple, influence of rocking and prolonged pitches
GOST R 51502-1999 Environmental dynamic testing for machines, instruments and other articles. Exposure to broad-band random vibration (digital control)

Professional Standard - Environmental Protection, Environmental Sampling Instruments

HJ/T 375-2007 Technical requirement and test procedures for ambient air sampler
HJ 93-2013 Specifications and test procedures for PM<下标10> and PM<下标2.5> sampler
HJ/T 376-2007 Technical requirement and test procedures for 24 hour thermostatic automatic continuous ambient air sampler
HJ/T 368-2007 Technical requirement for environmental protection products. Special orifice flowmeters for total suspended particulate sampler calibration
HJ 480-2009 Ambient air.Determination of the fluoride.Filter sampling followed by fluorine ion-selective electrode method
HJ 955-2018 Determination of fluoride in ambient air by fluoride ion selective electrode method for filter membrane sampling
HJ 955 Determination of ambient air fluoride filter membrane sampling fluoride ion selective electrode method
HJ 759-2015 Ambient air-Determination of volatile organic compounds- Collected by specially-prepared canistersand analyzed by gas chromatography/mass spectrometry
HJ 481-2009 Ambient air.Determination of the fluoride.Lime-paper sampling followed by fluorine ion-selective electrode method
HJ 93-2013(XG1-2018) Ambient air particulate matter (PM10 and PM2.5) sampler technical requirements and detection methods "No. 1 Amendment"
HJ 644-2013 Ambient air.Determination of volatile organic compounds.Sorbent adsorption and thermal desorption/gas chromatography mass spectrometry method

Association Francaise de Normalisation, Environmental Sampling Instruments

XP X 43-053-1997 AIR QUALITY. AMBIENT AIR. INSTRUCTION HANDBOOK FOR THE CALIBRATION OF ATMOSPHERIC POLLUANT ANALYZERS AND SAMPLERS. SAMPLING. MEASURING STATION AND GAS FLOW RATES.
NF X43-142*NF EN 17346:2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive Samplers
NF EN 17346:2020 Air ambiant - Méthode normalisée pour la détermination de la concentration en ammoniac au moyen d'échantillonneurs par diffusion
NF EN 16339:2013 Air ambiant - Méthode pour la détermination de la concentration du dioxyde d'azote au moyen d'échantillonneurs par diffusion
XP X43-058:2007 Ambient air - Determination of crop protection substances (pesticides) in ambient air - Active sampling
NF X10-811:1995 Marine environment-Oceanographic instrumentation-Environmental tests and recommendations for equipments in marine atmosphere
NF M60-790-2*NF EN ISO 18589-2:2018 Measurement of radioactivity in the environment - Soil - Part 2 : Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
NF ISO 18589-2:2023 Mesurage de la radioactivité dans l'environnement - Sol - Partie 2 : lignes directrices pour la sélection de la stratégie d'échantillonnage, l'échantillonnage et le prétraitement des échantillons
NF EN 17805:2023 Qualité de l'eau - Échantillonnage, collecte et conservation de l'ADN environnemental prélevé dans l'eau
NF EN ISO 5667-14:2017 Qualité de l'eau - Échantillonnage - Partie 14 : lignes directrices sur l'assurance qualité et le contrôle qualité pour l'échantillonnage et la manutention des eaux environnementales
NF M60-760:2017 Nuclear Energy - Measurement of radioactivity in the environment - Air - Sampling of aerosols for measurement of radioactivity in the environment
XP X43-080-1*XP CEN/TS 16817-1:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1 : technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler
NF X43-055:2017 Ambient air - Metrology applied to the measurement of gaseous atmospheric pollutants - Sampling of ambient air and implementation of calibration gases
NF X10-821:1995 Marine environment-Oceanographic instrumentation-Environmental tests and recommendations for air-conditioned equipments
XP CEN/TS 16817-1:2015 Air ambiant - Surveillance des effets d'organismes génétiquement modifiés (OGM) - Surveillance du pollen - Partie 1 : échantillonnage technique du pollen à l'aide d'un filtre de masse à pollen (FMP) et d'un échantillonneur Sigma-2
NF ISO 26367-3:2022 Lignes directrices pour déterminer l'impact environnemental des effluents du feu - Partie 3 : échantillonnage et analyse
NF X35-202*NF EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities
NF X10-822:1995 Marine environment-Oceanographic instrumentation-Environmental tests and recommendations for non-air conditioned equipments
NF ISO 20045:2023 Mesurage de la radioactivité dans l'environnement - Air : tritium - Méthode d'essai à l'aide d'un prélèvement par barbotage
NF ISO 20956:2023 Radioprotection - Étalonnage d'instruments à faible débit de dose pour la surveillance de zone et de l'environnement
NF M60-780-2:2020 Énergie nucléaire - Mesure de la radioactivité dans l'environnement - Bioindicateurs - Partie 2 : guide général pour l'échantillonnage, le conditionnement et le prétraitement de bioindicateurs du milieu dulçaquicole
NF M60-780-1:2020 Énergie nucléaire - Mesure de la radioactivité dans l'environnement - Bioindicateurs - Partie 1 : guide général pour l'échantillonnage, le conditionnement et le prétraitement de bioindicateurs du milieu terrestre
NF EN ISO 11665-11:2019 Mesurage de la radioactivité dans l'environnement - Air : radon 222 - Partie 11 : méthode d'essai pour le gaz du sol avec un prélèvement en profondeur
NF EN 13312-3:2001 Biotechnologie - Critères de performance pour tuyauteries et instrumentation - Partie 3 : dispositifs d'échantillonnage et d'inoculation
NF EN 16414:2014 Air ambiant - Biosurveillance à l'aide de mousses - Accumulation des contaminants atmosphériques dans les mousses prélevées in situ : de la récolte à la préparation des échantillons
NF EN 12305:1997 Biotechnologie - Organismes modifiés disséminés dans l'environnement - Guide des stratégies d'échantillonnage pour les disséminations volontaires de plantes génétiquement modifiées.
FD X43-404:2022 Air quality - Air of domestic living accomodations and of public premises - Airbone sampling and analysis of the allergens in the indoor environment
NF EN 16868:2019 Air ambiant - Échantillonnage et analyse des grains de pollen en suspension dans l'air et des spores fongiques pour les réseaux relatifs à l'allergie - Méthode volumétrique de Hirst
NF EN ISO 16017-2:2003 Air intérieur, air ambiant et air des lieux de travail - Échantillonnage et analyse des composés organiques volatils par tube à adsorption/désorption thermique/chromatographie en phase gazeuse sur capillaire - Partie 2 : échantillonnage par diffu...
NF EN 60846-1:2015 Instrumentation pour la radioprotection - Instruments pour la mesure et/ou la surveillance de l'équivalent de dose (ou du débit d'équivalent de dose) ambiant et/ou directionnel pour les rayonnements bêta, X et gamma - Partie 1 : instruments de me...

British Standards Institution (BSI), Environmental Sampling Instruments

21/30443596 DC BS EN 17805. Water sampling for capture of macrobial environmental DNA in aquatic environments
BS ISO 18589-2:2022 Measurement of radioactivity in the environment. Soil - Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
BS EN ISO 5667-14:2016 Water quality. Sampling. Guidance on quality assurance and quality control of environmental water sampling and handling
PD ISO/TR 14644-21:2023 Cleanrooms and associated controlled environments. Airborne particle sampling techniques
BS ISO 10109-12:2004 Optics and optical instruments - Environmental requirements - Conditions of transport for optical instruments
21/30441990 DC BS ISO 18589-2. Measurement of radioactivity in the environment. Soil. Part 2. Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples
BS ISO 26367-3:2022 Guidelines for assessing the adverse environmental impact of fire effluents - Sampling and analysis
BS ISO 10109-7:2001 Optics and optical instruments - Environmental requirements - Test requirements for optical measuring instruments
BS ISO 10109-11:2001 Optics and optical instruments - Environmental requirements - Optical instruments for outdoor conditions of use
BS EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities
BS ISO 11665-11:2016 Measurement of radioactivity in the environment. Air: radon-222. Test method for soil gas with sampling at depth
BS EN ISO 11665-11:2019 Measurement of radioactivity in the environment. Air: radon-222. Test method for soil gas with sampling at depth
BS ISO 10109-6:2005 Optics and photonics - Environmental requirements - Test requirements for medical optical devices
PD CEN ISO/TR 22930-1:2021 Evaluating the performance of continuous air monitors. Air monitors based on accumulation sampling techniques
BS 1747-6:1983 Methods for measurement of air pollution. Sampling equipment used for the determination of gaseous sulphur compounds in ambient air
21/30392373 DC BS ISO 26367-3. Guidelines for assessing the adverse environmental impact of fire effluents. Part 3. Sampling and analysis
BS ISO 10109-4:2001 Optics and optical instruments - Environmental requirements - Test requirements for telescopic systems
BS ISO 10109-8:1994 Optics and optical instruments - Environmental requirements - Test requirements for extreme conditions of use
BS ISO 20045:2023 Measurement of the radioactivity in the environment. Air: tritium. Test method using bubbler sampling
23/30450169 DC BS EN ISO 7726. Ergonomics of the thermal environment. Instruments for measuring and monitoring physical quantities
BS ISO 10109-6:1994 Optics and optical instruments - Environmental requirements - Test requirements for medical optical devices
BS EN 13205:2002 Workplace atmospheres - Assessment of performance of instruments for measurement of airborne particle concentrations
22/30394888 DC BS ISO 20956. Radiological protection. Low dose rate calibration of instruments for environmental and area monitoring
21/30404333 DC BS ISO 20044-1. Measurement of radioactivity in the environment. Air: aerosols. Test method using sampling by filter media. Part 1. Aerosols sampling
PD CEN ISO/TR 22930-2:2021 Evaluating the performance of continuous air monitors. Air monitors based on flow-through sampling techniques without accumulation
DD CEN/TS 16115-1:2011 Ambient air quality. Measurement of bioaerosols - Determination of moulds using filter sampling systems and culture-based analyses
BS EN IEC 62327:2019 Radiation protection instrumentation. Hand-held instruments for the detection and identification of radionuclides and for the estimation of ambient dose equivalent rate from photon radiation
BS EN 62327:2011 Radiation protection instrumentation. Hand-held instruments for the detection and identification of radionuclides and for the indication of ambient dose equivalent rate from photon radiation
22/30404742 DC BS ISO 20045. Measurement of the radioactivity in the environment. Air: tritium. Test Method using bubbler sampling

American Society for Testing and Materials (ASTM), Environmental Sampling Instruments

ASTM D4532-10 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
ASTM D4532-15 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
ASTM D6282-98 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
ASTM D6282-98(2005) Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
ASTM D6001/D6001M-20 Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
ASTM D6282/D6282M-14 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
ASTM D6602-00 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
ASTM D6602-03a Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
ASTM D6602-13(2018) Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
ASTM D6602-03be1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
ASTM D6640-01(2015) Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations

International Organization for Standardization (ISO), Environmental Sampling Instruments

ISO/CD 17805:2023 Water quality - Sampling, capture and preservation of environmental DNA from water
ISO 7726:1985 Thermal environments — Instruments and methods for measuring physical quantities
ISO 4219:1979 Air quality; Determination of gaseous sulphur compounds in ambient air; Sampling equipment
ISO 10109-12:2004 Optics and optical instruments - Environmental requirements - Part 12: Conditions of transport for optical instruments
ISO/DIS 7726 Ergonomics of the thermal environment — Instruments for measuring and monitoring physical quantities
ISO 10109-7:2001 Optics and optical instruments - Environmental requirements - Part 7: Test requirements for optical measuring instruments
ISO 10109-11:2001 Optics and optical instruments - Environmental requirements - Part 11: Optical instruments for outdoor conditions of use
ISO/DIS 20956 Radiological protection — Low dose rate calibration of instruments for environmental and area monitoring
ISO/FDIS 20956:2023 Radiological protection — Low dose rate calibration of instruments for environmental and area monitoring
ISO 20956:2023 Radiological protection — Low dose rate calibration of instruments for environmental and area monitoring
ISO 9855:1993 Ambient air; determination of the particulate lead content of aerosols collected on filters; atomic absorption spectrometric method
ISO 11665-11:2016 Measurement of radioactivity in the environment — Air: radon-222 — Part 11: Test method for soil gas with sampling at depth
ISO 9022-1:1994 Optics and optical instruments - Environmental test methods - Part 1: Definitions, extent of testing
ISO/CD 18510-1:2011 Measurement of the radioactivity in the environment — Bioindicator — Part 1: Part 1: General guide for the sampling,conditioning and pre-treatment

ES-UNE, Environmental Sampling Instruments

UNE-EN 17346:2021 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers
UNE-EN ISO 18589-2:2018 Measurement of radioactivity in the environment - Soil - Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples (ISO 18589-2:2015)
UNE-EN ISO 5667-14:2017 Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling (ISO 5667-14:2014)
UNE-EN 60846-1:2014 Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors (Endorsed by AENOR in November of 2014.)
UNE-EN ISO 11665-11:2019 Measurement of radioactivity in the environment - Air: radon-222 - Part 11: Test method for soil gas with sampling at depth (ISO 11665-11:2016) (Endorsed by Asociación Española de Normalización in November of 2019.)
UNE-EN 16868:2020 Ambient air - Sampling and analysis of airborne pollen grains and fungal spores for networks related to allergy - Volumetric Hirst method

NZ-SNZ, Environmental Sampling Instruments

AS/NZS 3580.17:2016 Methods for sampling and analysis of ambient air Method 17: Determination of gaseous compounds in ambient air-Direct-reading cavity ring-down spectroscopy instrumental method

AWS - American Welding Society, Environmental Sampling Instruments

F1.3M-2006 A Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment
F1.3-1991 Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment
F1.3-1999 Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment
F1.3-1983 EVALUATING CONTAMINANTS IN THE WELDING ENVIRONMENT A SAMPLING STRATEGY GUIDE

Professional Standard - Nuclear Industry, Environmental Sampling Instruments

EJ/T 527-1990 Basic Regulations of Biological Sampling in Environmental Radiation Monitoring
EJ/T 428-1989 General regulations for soil sample collection and preparation in environmental nuclear radiation monitoring

American Welding Society (AWS), Environmental Sampling Instruments

AWS F1.3-1999 Sampling Strategy Guide for Evaluating Contaminants in the Welding Environment

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Environmental Sampling Instruments

GB/T 17061-1997 Technique specifications of sampling instruments for air in the workplace
GB/T 29787-2013 Radiation protection instrumentation.Mobile instrumentation for the measurement of photon and neutron radiation in the environment
GB/T 3780.23-2016 Carbon black.Part 23:Sampling and testing of carbon black fugitive emissions or other environmental particulate

TH-TISI, Environmental Sampling Instruments

TIS 2574-2012 Airborne particulate matter sampling and analysis in workplace environment

PL-PKN, Environmental Sampling Instruments

PN Z04008-07-1989 Air puri?y pro?ection Sampling methods Prindplcs of air sampling in work environment and interpretation of results
PN-EN 17346-2020-11 E Ambient air -- Standard method for the determination of the concentration of ammonia using diffusive samplers

ZA-SANS, Environmental Sampling Instruments

SANS 5667-14:2007 Water quality - Sampling Part 14: Guidance on quality assurance of environmental water sampling and handling

RO-ASRO, Environmental Sampling Instruments

STAS E 6877/12-1989 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOS1VE ATMOSPHERES In compound ,,m"
STAS SR EN 27726-1996 Thermal environments - Instruments and methods for measuring physical quantities
STAS 6877/4-1987 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES Intrisic safety i
STAS 6877/7-1987 ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES Increased safety ?e"

AT-ON, Environmental Sampling Instruments

ONORM M 5859-1995 Air analysis - Ambient air monitoring - Calibration of ambient air monitoring instruments
OENORM EN ISO 7726:2021 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998)

Danish Standards Foundation, Environmental Sampling Instruments

DS/EN ISO 7726:2001 Ergonomics of the thermal environment - Instruments for measuring physical quantities
DS/EN 12305:1998 Biotechnology - Modified organisms for application in the environment - Guidance for the sampling strategies for deliberate releases of genetically modified plants
DS/EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements
DS/EN ISO 16017-2:2003 Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling
DS/EN 12686:1999 Biotechnology - Modified organisms for application in the environment - Guidance for the sampling strategies for deliberate releases of genetically modified microorganisms, including viruses

Japanese Industrial Standards Committee (JISC), Environmental Sampling Instruments

JIS W 7002:1981 Environmental conditions and test procedures for airborne equipment and instruments
JIS F 0807:1999 General requirements for environmental tests of control and instrumentation equipment for marine use
JIS B 7261:2005 Optics and optical instruments -- Environmental requirements -- Test requirements for telescopic systems

ES-AENOR, Environmental Sampling Instruments

UNE 81-455-1985

European Committee for Standardization (CEN), Environmental Sampling Instruments

CEN/TS 16817-1:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1: Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler
EN ISO 5667-14:2016 Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling
PD CEN/TS 16115-1:2011 Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culture-based analyses
EN ISO 11665-11:2019 Measurement of radioactivity in the environment - Air: radon-222 - Part 11: Test method for soil gas with sampling at depth (ISO 11665-11:2016)
EN ISO 7726:2001 Ergonomics of the Thermal Environment - Instruments for Measuring Physical Quantities ISO 7726:1998; Supersedes EN 27726:1993
EN 27726:1993 Thermal Environments - Instruments and Methods for Measuring Physical Quantities (ISO 7726 : 1985) Superseded by EN ISO 7726:2001

CEN - European Committee for Standardization, Environmental Sampling Instruments

PD CEN/TS 16817-1:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring Part 1: Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler

BE-NBN, Environmental Sampling Instruments

NBN X 10-002-1986 Specifications relating to the appliances and methods
NBN-EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)

AENOR, Environmental Sampling Instruments

UNE 77202:1991 AIR QUALITY. DETERMINATION OF GASEOUS SULPHUR COMPOUNDS IN AMBIENT AIR. SAMPLING EQUIPMENT.
UNE-EN 16414:2014 Ambient air - Biomonitoring with mosses - Accumulation of atmospheric contaminants in mosses collected in situ: from the collection to the preparation of samples
UNE-EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities. (ISO 7726:1998)
UNE-EN 13528-1:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements
UNE-EN 12686:1999 Biotechnology - Modified organisms for application in the environment - Guidance for the sampling strategies for deliberate releases of genetically modified microorganisms, including viruses

American National Standards Institute （ANSI), Environmental Sampling Instruments

ANSI/ISA 92.04.01-1-2007 Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres
ANSI N42.17C-1989 Radiation Instrumentation – Performance Specifications for Health Physics Instrumentation – Portable Instrumentation for Use in Extreme Environmental Conditions
ANSI N42.17a-2003 Performance Specifications for Health Physics Instrumentation – Portable Instrumentation for Use in Normal Environmental Conditions

国家市场监督管理总局、中国国家标准化管理委员会, Environmental Sampling Instruments

GB/T 40233-2021 Ergonomics of the thermal environment—Instruments for measuring physical quantities
GB/T 39555-2020 Intelligent laboratory—Instruments and equipment—Data interface of climatic and environmental testing equipment

未注明发布机构, Environmental Sampling Instruments

BS EN ISO 7726:2001(2002) Ergonomics of the thermal environment — Instruments for measuring physical quantities

Korean Agency for Technology and Standards (KATS), Environmental Sampling Instruments

KS B ISO 10109-12:2006 Optics and optical instruments－Environmental requirements－Part 12：Conditions of transport for optical instruments
KS B ISO 10109-12-2006(2021) Optics and optical instruments — Environmental requirements —Part 12: Conditions of transport for optical instruments
KS B ISO 10109-12-2006(2016) Optics and optical instruments — Environmental requirements —Part 12: Conditions of transport for optical instruments
KS B ISO 10109-7:2004 Optics and optical instruments－Environmental requirements－Part 7：Test requirements for optical measuring instruments
KS B ISO 10109-11-2006(2016) Optics and optical instruments — Environmental requirements —Part 11: Optical instruments for outdoor conditions of use
KS B ISO 10109-7-2004(2019) Optics and optical instruments－Environmental requirements－Part 7：Test requirements for optical measuring instruments
KS C 6594-2007(2018) Performance requirements for instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
KS B ISO 10109-11-2006(2021) Optics and optical instruments — Environmental requirements —Part 11: Optical instruments for outdoor conditions of use
KS B ISO 10109-11:2006 Optics and optical instruments－Environmental requirements－Part 11：Optical instruments for outdoor conditions of use
KS C 6595-2007(2018) Installation, operation and maintenance of instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
KS C IEC 61172-2005(2020) Radiation protection instrumentation－Monitoring equipment－Radioactive aerosols in the environment
KS A IEC 60846-2003(2013) Radiation protection instrumentation－Ambient and/or directional dose equivalent(rate) meters and/or monitors for beta, X and gamma radiation
KS C IEC 60846-1-2014(2019) Radiation protection instrumentation — Ambient and/or directional dose equivalent(rate) meters and/or monitors for beta, X and gamma radiation — Part 1: Portable workplace and environmental meters and
KS I ISO 9855:2005 Ambient air－Determination of the particulate lead content of aerosols collected on filters(Atomic absorption spectrometric method)
KS B ISO 10109-6-2002(2017) Optics and optical instruments－Environmental requirements－Part 6：Test requirements for medical optical devices
KS B ISO 10109-4-2006(2021) Optics and optical instruments — Environmental requirements —Part 4: Test requirements for telescopic systems
KS B ISO 10109-4-2006(2016) Optics and optical instruments — Environmental requirements —Part 4: Test requirements for telescopic systems
KS B ISO 9022-19-2002(2022) Optics and optical instruments－Environmental test methods－Part 19：Temperature cycles combined with sinusoidal or random vibration
KS B ISO 9022-19-2002(2017) Optics and optical instruments－Environmental test methods－Part 19：Temperature cycles combined with sinusoidal or random vibration

International Electrotechnical Commission (IEC), Environmental Sampling Instruments

IEC 62438:2010 Radiation protection instrumentation - Mobile instrumentation for the measurement of photon and neutron radiation in the environment

Institute of Electrical and Electronics Engineers (IEEE), Environmental Sampling Instruments

IEEE N42.17A-1989 Performance Specifications for Health Physics Instrumentation - Portable Instrumentation for Use in Normal Environmental Conditions
IEEE N42.17C-1989 Performance specifications for health physics instrumentation; portable instrumentation for use in extreme environmental conditions
IEEE/ANSI N42.17C-1989 Performance specifications for health physics instrumentation; portable instrumentation for use in extreme environmental conditions
IEEE/ANSI N42.17A-1989 American National Standard Performance Specifications for Health Physics Instrumentation - Portable Instrumentation for Use in Normal Environmental Conditions
ANSI Std N42.17C-1989 American National Standard Performance Specifications for Health Physics Instrumentation. Portable Instrumentation for Use in Extreme Environmental Conditions
ANSI N42.17AC-2022 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Survey Instrumentation for Use in Normal and Extreme Environmental Conditions
IEEE/ANSI N42.17AC-2022 American National Standard Performance Specifications for Health Physics Instrumentation-Portable Survey Instrumentation for Use in Normal and Extreme Environmental Conditions

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Environmental Sampling Instruments

IEEE N42.17A-2003 Performance Specifications for Health Physics Instrumentation - Portable Instrumentation for Use in Normal Environmental Conditions

KR-KS, Environmental Sampling Instruments

KS B ISO 10109-12-2023 Optics and optical instruments — Environmental requirements — Part 12: Conditions of transport for optical instruments
KS C 6594-2007(2023) Performance requirements for instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
KS B ISO 10109-11-2023 Optics and optical instruments — Environmental requirements — Part 11: Optical instruments for outdoor conditions of use
KS C 6595-2007(2023) Installation, operation and maintenance of instruments used to detect oxygen-deficient/oxygen-enriched atmospheres
KS B ISO 10109-4-2023 Optics and optical instruments — Environmental requirements — Part 4: Test requirements for telescopic systems

Professional Standard - Education, Environmental Sampling Instruments

JY 0009-1990 Quality inspection provisions and test methods for the electronic teaching instruments

Lithuanian Standards Office , Environmental Sampling Instruments

LST EN ISO 7726:2002 Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998)
LST EN 13528-1-2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 1: General requirements
LST EN 12686-2000 Biotechnology - Modified organisms for application in the environment - Guidance for the sampling strategies for deliberate releases of genetically modified microorganisms, including viruses

国家文物局, Environmental Sampling Instruments

WW/T 0047-2012 Gas Diffusion Sampling and Determination Method for Environmental Detection of Cultural Relics Preservation in Collections Determination of Ammonia
WW/T 0046-2012 Gas diffusion sampling and determination method for environmental testing of cultural relics in collections. Determination of formic acid and acetic acid.

US-CFR-file, Environmental Sampling Instruments

CFR 40-1065.1105-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.1105:Sampling system design.
CFR 40-1065.1107-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.1107:Sample media and sample system preparation; sample system assembly.
CFR 40-61.33-2014 Protection of Environment. Part61:National emission standards for hazardous air pollutants. Section61.33:Stack sampling.
CFR 40-61.53-2014 Protection of Environment. Part61:National emission standards for hazardous air pollutants. Section61.53:Stack sampling.
CFR 40-1065.545-2014 Protection of Environment. Part1065:Engine-testing procedures. Section1065.545:Verification of proportional flow control for batch sampling.

Liaoning Provincial Standard of the People's Republic of China, Environmental Sampling Instruments

DB21/T 3071-2018 Determination of Volatile Organic Compounds in Ambient Air Passive Sampling/Thermal Desorption/Gas Chromatography-Mass Spectrometry

PT-IPQ, Environmental Sampling Instruments

NP 2199-1986

Shandong Provincial Standard of the People's Republic of China, Environmental Sampling Instruments

DB37/T 4434-2021 Determination of 57 kinds of ozone precursors in ambient air by tank sampling gas chromatography-hydrogen flame ionization detector mass spectrometry

VN-TCVN, Environmental Sampling Instruments

TCVN 6152-1996 Ambient air.Determination of the particulate lead content of aerosols collected on filters.Atomic absorption spectrometric method

CH-SNV, Environmental Sampling Instruments

SN EN 17346-2020 Ambient air - Standard method for the determination of the concentration of ammonia using diffusive samplers

TR-TSE, Environmental Sampling Instruments

TS 2064-1975 METHODS OF SAMPLING AND EVALUATION OF INSPECTION AND TEST RESULTS OF LABORATORY GLASS WARE AND MEDICAL GLASS INSTRUMENTS

NEMA - National Electrical Manufacturers Association, Environmental Sampling Instruments

NEMA WC 54-2008 GUIDE FOR FREQUENCY OF SAMPLING EXTRUDED DIELECTRIC POWER@ CONTROL@ INSTRUMENTATION@ AND PORTABLE CABLES FOR TEST
NEMA WC 54-1990 Guide for Frequency of Sampling Extruded Dielectric Power@ Control@ Instrumentation@ and Portable Cables for Test

ICEA - Insulated Cable Engineers Association Inc., Environmental Sampling Instruments

T-26-465-1990 Guide for Frequency of Sampling Extruded Dielectric Power@ Control@ Instrumentation@ and Portable Cables for Test

Society of Automotive Engineers (SAE), Environmental Sampling Instruments

SAE AS81703-1998 Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting FSC 5935

SAE - SAE International, Environmental Sampling Instruments

SAE AS81703B-2018 Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting FSC 5935
SAE AS81703A-2012 Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting FSC 5935