ZH
RU
ES

Aluminum performance testing method

Aluminum performance testing method, Total:499 items.

In the international standard classification, Aluminum performance testing method involves: Optics and optical measurements, Non-ferrous metals, Chipless working equipment, Biology. Botany. Zoology, Occupational safety. Industrial hygiene, Miscellaneous domestic and commercial equipment, Non-destructive testing, Measurement of fluid flow, Elements of buildings, Cutting tools, Woodworking equipment, Metrology and measurement in general, Optoelectronics. Laser equipment, Diagnostic, maintenance and test equipment, Sterilization and disinfection, Thermodynamics and temperature measurements, Testing of metals, Surface treatment and coating, Alarm and warning systems, Resistors, Analytical chemistry, Products of the textile industry, Products of the chemical industry, Installations in buildings, Electronic components in general, Quality, Construction technology, Welding, brazing and soldering, Paints and varnishes, Cans. Tins. Tubes, Office machines, Ferroalloys, Shipbuilding and marine structures in general, Accident and disaster control, Buildings, Geology. Meteorology. Hydrology, Mechanical testing, Protection of and in buildings, Electricity. Magnetism. Electrical and magnetic measurements, Road vehicles in general, Glass, Components for electrical equipment, Mining and quarrying, Construction materials, Clothes, Shafts and couplings, Rotating machinery, Galvanic cells and batteries, Refrigerating technology, Laboratory medicine, Test conditions and procedures in general, Construction industry, Transport, Domestic electrical appliances in general, Solar energy engineering, Products of non-ferrous metals, Shop fittings, Protection against fire, Electrical and electronic testing, Materials for the reinforcement of composites, General methods of tests and analysis for food products, Spices and condiments. Food additives, Linear and angular measurements, Railway rolling stock, Measurement of time, velocity, acceleration, angular velocity, Optical equipment, Applications of information technology, Explosion protection, Electrical equipment for working in special conditions, Industrial automation systems, Road vehicle systems, Medical sciences and health care facilities in general, Road engineering, Motor cycles and mopeds, Inks. Printing inks, Character sets and information coding, Equipment for the chemical industry, Equipment for the rubber and plastics industries, Energy and heat transfer engineering in general, Leisure. Tourism, Mining equipment, Electrical engineering in general, Leather technology, Nuclear energy engineering, Air quality, Equipment for processing of minerals, Audio, video and audiovisual engineering, Lamps and related equipment, Non-metalliferous minerals, Electronic tubes.

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Aluminum performance testing method

GB/T 32790-2016 Test method for weldability of aluminum and aluminum alloy extrusion welds
GB/T 9158-2015 Test methods of mechanics performance for windows and doors in building
GB/T 17661-1999 Detection method of drying equipments performance of sawn timber
GB/T 11153-1989 Parameters testing method of laser power meter in low range
GB/T 11153-2012 Test methods of laser power meter in loveer-range
GB/T 26489-2011 Methods for measuring super amphiphilicity of nanomaterials
GB/T 26490-2011 Methods for measuring super hydrophobicity of nanomaterials
GB/T 22632-2008 Door leaves.Determination of the resistance to hard body impact
GB/T 6609.22-2004 Chemical analysis methods and determination of physical performance of alumina Sampling
GB/T 12967.4-2014 Test methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 4:Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
GB/T 36159-2018 Guideline for the selection of coating types, tests and methods of assessing the performance of anodic oxide coatings and organic polymer coatings on aluminium and its alloys in architectural applications
GB/T 6609.1-2004 Chemical analysis methods and Determination of physical performance of alumina Determination of moisture-Gravimetric method
GB/T 21510-2008 Antimicrobial property detection methods for nano-inorganic materials
GB/T 15226-1994 Test method of air permeability performance for building curtain walls
GB/T 15227-1994 Test method of deformation under wind pressure for building curtain walls
GB/T 15228-1994 Test method of water penetration performance for building curtain walls
GB/T 6609.24-2004 Chemical analysis methods and determination of physical performance of alumina Measurement of the angle of repose
GB/T 22638.11-2023 Aluminum Foil Test Methods Part 11: Tests for Mechanical Properties
GB/T 25757-2010 Non-destructive testing.Test methods of performance characteristics of automatic magnetic flux leakage testing systems for steel tubes
GB/T 18250-2000 Test method for performance in plane deformation of curtain wall's
GB/T 11976-2002 Graduation and test method of daylighting properties for windows
GB/T 7107-2002 Graduation and test method for air permeability performance of windows
GB/T 7108-2002 Graduation and test method for watertightness performance of windows
GB/T 11976-2015 Graduation and test method of daylighting properties for external windows
GB/T 8484-2002 Graduation and test method for thermal insulating properties of windows
GB 11012-1989 Inspection procedures for electrical performance test equipments for solar cells
GB/T 29043-2012 Graduation and test method for thermal insulating properties of curtain walls
GB/T 6609.29-2004 Chemical analysis methods and determination of physical performance of alumina Determination of an absorption index
GB/T 6609.25-2004 Chemical analysis methods and determination of physical performance of alumina Determination of untamped density
GB/T 6609.2-2004 Chemical analysis methods and Determination of physical performance of alumina Determination of the loss of mass at 1100°C-Gravimetric method
GB/T 27665-2011 Test methods for lasing capability of Nd:YAG laser rods
GB/T 6609.34-2009 Chemical analysis methods and determination of physical performance of alumina.Part 34:Method of calculating alumina content
GB/T 6609.5-2004 Chemical analysis methods and determination of physical performance of alumina Determination of sodium oxide content
GB/T 6609.27-2004 Chemical analysis methods and determination of physical performance of alumina Particle size analysis-Sieving method
GB/T 7106-2002 Graduation and test method for wind resistance performance of windows
GB/T 16729-1997 Graduation and test method for thermal insulating properties of doors
GB/T 11976-1989 Graduation and test method of daylighting properties for windows
GB/T 8484-2008 Graduation and test method for thermal insulating properties of doors and windows
GB/T 29737-2013 Graduations and test method of sand and dust resistance performance for building external windows and doors
GB/T 21294-2014 Testing methods of physical and chemical performance of garments
GB/T 21294-2007 Testing method of the garments’intrinsic quality
GB/T 6609.26-2004 Chemical analysis methods and determination of physical performance of alumina Determination of absolute density-Pycnometer method
GB/T 26594-2011 Non-destructive testing instruments.Properties test methods of industrial X-ray tube
GB/T 18250-2015 Graduations and test method for performance of deformation between stories of curtain wall
GB/T 15227-2007 Test method of air permeability,watertightness,wind load resistance performance for curtain walls
GB/T 6609.31-2009 Methods of chemical analysis and determination of physical properties of alumina - Part 31: Determination of flow angle
GB/T 6609.15-2004 Chemical analysis methods and determination of physical performance of alumina Determination of chlorine content-Ferric thiocyanate photometric method
GB/T 6609.6-2004 Chemical analysis methods and determination of physical performance of alumina Determination of potassium oxide content-Flame photometric method
GB/T 3169.1-1982 Chemical analysis of aluminum powder--The gasometric method for determination of active aluminum
GB/T 6609.23-2004 Methods for chemical analysis of alumina and methods for determination of physical properties Preparation and storage of samples
GB/T 6609.23-2004 Methods for chemical analysis of alumina and methods for determination of physical properties Preparation and storage of samples
GB/T　6609.23-2004 Methods for chemical analysis of alumina and methods for determination of physical properties Preparation and storage of samples
GB/T 22638.2-2008 Test methods for aluminium and aluminium alloy foils.Part 2:Determination of porosity
GB/T 6609.32-2009 Chemical analysis methods and determination of physical performance of alumina.Part 32:Determination of а-alumina content by X-ray diffraction
GB/T 6609.36-2009 Chemical analysis methods and determination of physical performance of alumina-Part 36: Determination of flow time
GB/T 6609.33-2009 Chemical analysis methods and determination of physical performance of alumina-Part 33: Determination of attrition index
GB/T 26592-2011 Non-destructive testing instruments.Properties test methods of industrial X-ray apparatus
GB/T 28289-2012 Test methods for composite performances of aluminium alloy thermal barrier profiles
GB/T 6609.3-2004 Chemical analysis methods and Determination of physical performance of alumina Determination of silicon dioxide content-Molybdenum blue photometric method
GB/T 8485-2002 The graduation and test method for airborne sound insulating properties of windows
GB/T 30103.2-2013 Methods of testing for thermal performance on cold store.Part 2 : Air velocity testing
GB/T 8485-2008 Classification and testing method of airborne sound insulation performance of building doors and windows
GB/T 6626.4-1986 Test methods for the characteristics of getter-mercury dispenser--Method for peel off test of getter-mercury dispenser
GB/T 6609.6-2018 Chemical analysis methods and determination of physical performance of alumina.Part 6:Determination of potassium oxide content
GB/T 6609.9-2004 Chemical analysis methods and determination of physical performance of alumina Determination of cupric oxide content-2,9-Dimethyl-1,10phenanthroline photometric method
GB/T 41907-2022 Assay method of enterokinase activity
GB/T 30990-2014 Determination of the activity of lysozyme
GB/T 6609.27-2023 Methods of chemical analysis and determination of physical properties of alumina Part 27: Particle size analysis and sieving method
GB/T 6609.27-2009 Chemical analysis methods and determination of physical performance of alumina.Part 27:Partical size analysis.Method using electriformed sieves
GB/T 26593-2011 Non-destructive testing instruments.Properties test method for performance of industrial X-ray computed tomography(CT) equipment
GB/T 13686-1992 Graduation and test methods of air permeability anf water penetration for building external doors
GB/T 8752-2006 Anodizing of aluminium and its alloys. Check of continuity of thin anodic oxide coating. Copper sulphate test
GB/T 3362-1982 Test method for tensile properties of carbon fiber strands
GB/T 16730-1997 The graduation of air-borne sound insulating properties and test method for door
GB/T 29907-2013 Test method for watertightness of curtain walls under dynamic wind pressure
GB/T 13685-1992 Graduation of resisting wind pressure capacity and the test method for building external doors
GB/T 26773-2011 Intelligent transport systems.Lane departure warning systems.Performance requirements and test procedures
GB/T 6609.35-2023 Methods of chemical analysis and determination of physical properties of alumina Part 35: Determination of specific surface area Nitrogen adsorption method
GB/T 6609.35-2009 Chemical analysis methods and determination of physical performance of alumina-Part 35: Determination of specific surface area by nitrogen adsorption
GB/T 12967.5-2013 Test methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 5:Assessment of resistance of anodic oxidation coatings to cracking by deformation
GB/T 29069-2012 Non-destructive testing.Test method for measurement of industrial computed tomography (CT) system performance
GB/T 8754-1988 Anodizing of aluminium and aluminium alloys--Insulation check by measurement of breakdown potential
GB 8754-1988 Aluminum and aluminum alloy anodic oxidation application breakdown potential measurement method to test insulation
GB/T 6609.19-2004 Chemical analysis methods and determination of physical performance of alumina Determination of lithia content-Flame atomic absorption spectrophotometric method
GB/T 6609.20-2004 Chemical analysis methods and determination of physical performance of alumina Determination of magnesia content-Flame atomic absorption spectrophotometric method
GB/T 6609.14-2004 Chemical analysis methods and determination of physical performance of alumina Determination of fluorine content-Lanthanum-alizarincomplexone spectrophotometric method
GB/T 6609.17-2004 Chemical analysis methods and determination of physical performance of alumina Determination of phosphorus pentoxide content-Molybdenum blue spectrophotometric method
GB/T 6609.12-2004 Chemical analysis methods and determination of physical performance of alumina Determination of zinc oxide content-Flame atomic absorption spectrophotometric method
GB/T 6609.13-2004 Chemical analysis methods and determination of physical performance of alumina Determination of calcium oxide content-Flame atomic absorption spectrophotometric method
GB/T 6609.20-2004 Methods for chemical analysis of alumina and methods for determining physical properties
GB/T 20608-2006 Intelligent transportation system-Adaptive cruise control systems-Performance requirements and test product
GB/T 6609.2-2009 Chemical analysis methods and determination of physical performance of aluminium hydroxide.Part 2:Determination of loss of mass at 300℃ and 1000℃
GB/T 6609.25-2023 Methods of chemical analysis and determination of physical properties of alumina - Part 25: Determination of bulk and tapped densities
GB/T 19495.4-2004 Detection of genetically modified organisms and derived products. Qualitative PCR methods based on nucleic acid
GB/T 26347-2010 Test methods of mosquito resistance to insecticides.Bioassay methods
GB/T 42786-2023 Classification and testing methods of thermal comfort and visual comfort performance of building shading
GB/T 29272-2012 Information technology.Radio frequency identification device performance test methods.Test methods for system performance
GB/T 12967.7-2010 Test methods for anodic oxidation coatings of aluminium and aluminium alloys.Part 7: Measurement of abrasion resistance of anodic oxidation coatings by sand falling test apparatus
GB/T 26966-2011 Mine hoists.Test method for energy efficiency in hoist
GB/T 13181-2002 Measurement methods of scintillator characteristics
GB/T 10901-1989 Performance testing for centrifuge
GB/T 10901-2005 Methods of Performance testing for centrifuge
GB/T 29293-2012 Measurement methods of the performance for LED downlights
GB/T 6609.16-2004 Chemical analysis methods and determination of physical performance of alumina Determination of boron trioxide content-Curcumin spectrophotometric method
GB/T 6609.11-2004 Chemical analysis methods and determination of physical performance of alumina Determination of manganous oxide content-Flame atomic absorption spectrophotometric method
GB/T 6609.4-2004 Chemical analysis methods and determination of physical performance of alumina Determination of ferric oxide content-Orthophenanthroline photometric method
GB/T 6609.28-2004 Chemical analysis methods and determination of physical performance of alumina Determination of the fine particle size distribution(less than 60μm)-Method using electroformed sieves
GB/T 30103.1-2013 Methods of testing for thermal performance on cold store.Part 1: Temperature and humidity testing
GB/T 7106-2008 Graduations and test methods of air permeability,watertightness,wind load resistance performance for building external windows and doors

Group Standards of the People's Republic of China, Aluminum performance testing method

T/GDCKCJH 051-2021 Performance requirements and test method for bar code verifier
T/GDJD 006-2020 Performance classification and testing method ofintelligent clothes airing machine
T/GDCKCJH 046-2021 Performance requirements and test method for helium mass spectrometer leak detector
T/CASME 325-2023 Testing method for performance of moist heat sterilizer
T/GDCKCJH 078-2023 Performance requirements and test methods for heating plate
T/GDCKCJH 077-2023 Performance requirements and test methods for soldering furnaces
T/GDCKCJH 049-2021 Performance requirements and test methods for ultraviolet energy meter
T/ATNT 1-2023 Method for testing the performance of couplant for ultrasonic testing of metal materials
T/GDCKCJH 047-2021 Performance requirements and test method for mask flame retardant tester
T/GDCKCJH 048-2021 Performance requirements and test methods for ultraviolet analyzer
T/GDCKCJH 043-2021 Performance requirements and test methods of mercury diffusion hydrogen tester
T/CADBM 45-2021 Testing method for decontamination performance of coating materials Environmental test chamber method
T/CANSI 41-2021 Requirements and methods for performance testing of Marine optical fiber link
T/GDCKCJH 042-2021 Performance requirements and test methods of tapestry brick drawing instrument
T/GDCKCJH 064-2022 Performance requirements and testing methods for cable plug testers
T/GDCKCJH 063-2022 Performance requirements and testing methods for ultra-low frequency withstand voltage testers
T/GDCKCJH 041-2021 Performance requirements and test methods of portable adhesion tester
T/CSTM 00829-2022 Measurement method of comprehensive properties for automatic eddy current testing system for rails
T/CSTM 00828-2022 Measurement method of comprehensive properties for automatic ultrasonic testing system for rails
T/GDCKCJH 066-2022 Performance requirements and test methods for ozone aging test chambers
T/GDCKCJH 050-2021 Performance requirements and test method for carbon dioxide incubator
T/CSTM 00150-2020 Corrosion-resistant testing method for sintered glass powder products
T/GDCKCJH 067-2022 Performance requirements and testing methods for constant temperature oscillation incubator
T/ESD 2001-2021 Non-humidity Reliant Antistatic Product - Test Method for Antistatic Performance
T/CEEIA 586-2022 Wind energy generation systems - integrated inspection, test and evaluation method of operation and grid connection performance
T/CSEE 0008-2016 Property detection methods of large-medium electric machinery
T/CITS 0004-2023 Technical requirements and testing methods for high-performance medical refrigerator
T/CSTM 00363-2021 Test and evaluation method for heat dissipation performance of self-cooling coating materials
T/CEEIA 260-2016 Property detection methids of large-medium electric machinery stator winding insulation
T/GIEHA 009-2018 Test method for allergen removal performance of air purifiers
T/CCTA 20202-2022 Testing method of physical and chemical properties of natural color fabric
T/GDCKCJH 068-2022 Performance requirements and test methods for electrostatic eliminator of ion fan
T/CMA JD009-2020 Dynamic test items and methods for portable braking performance testers
T/CASME 709-2023 Four-wheeled all-terrain vehicle safety performance inspection requirements and test methods
T/GDID 1024-2020 Method for measurement of energy efficiency of traction driven elevator
T/GDCKCJH 065-2022 Performance requirements and test methods for DC parameter testers of zinc oxide lightning arrester
T/CATA 0145-2021 Ultrasonic non-destructive testing method for residual stress in milling of aluminum alloy components
T/CATA 0144-2021 Ultrasonic nondestructive testing method for welding residual stress distribution of aluminum alloy components
T/SGGG 0001.2-2021 Energy-saving safety glass for exterior windows for home improvement Part 2: Performance requirements and testing methods
T/GDCKCJH 053-2021 Temperature performance requirements and test method for tunnel furnace of reflow soldering & wave soldering
T/CASME 711-2023 Micro low-speed electric scooter performance inspection standards and test methods
T/SJZSYYQXH JZ009-2023 Calibration method of on-site testing equipment for thermal performance of building envelope
T/CAAMTB 90-2022 Performance requirements and test methods of aluminum matrix composite brake discs for electric passenger vehicles
T/ZNL 001-2021 The detection method for anti-thermal aging performance of electric vehicle charging cable Thermogravimetric analysis
T/CASEI 31001-2019 Flame arresters performance test methods
T/GDCKCJH 052-2021 Performance requirements and test method for optoelectronic integrated test instrument with integrating sphere
T/GDSM 001-2019 Testing Methods of Optical Characteristics for Flexible Display
T/GSEA 002-2023 Testing method for power quality of electrochemical energy storage-photovoltaic system
T/NAHIEM 28-2020 Test Method for Removal of Zearalenone by Nonmetallic Mineral Materials

Japanese Industrial Standards Committee (JISC), Aluminum performance testing method

JIS H 1902:1990 Methods for determination on physical properties of aluminium oxide
JIS Z 2314:1991 Test methods for performance characteristics of eddy current testing instruments
JIS B 9514:1990 Test methods for time recorders
JIS Z 8462-2:2003 Capability of detection -- Part 2: Methodology in the linear calibration case
JIS B 9514:2002 Test methods for time recorders
JIS Z 3082:1995 Methods of ultrasonic examination for T type welds of aluminium plates
JIS Z 2324-2:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 2: Method of testing for performance characteristics of laser inspection system
JIS Z 3080:1995 Methods of ultrasonic angle beam examination for butt welds of aluminium plates
JIS Z 2324-3:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 3: Method of testing for performance characteristics of camera inspection system
JIS Z 2324-4:2020 Non-destructive testing -- Automatic inspection system for inner diameter surface of machining holes -- Part 4: Method of testing for performance characteristics of eddy current inspection system
JIS Z 8462-5:2011 Capability of detection -- Part 5: Methodology in the linear and non-linear calibration cases

Korean Agency for Technology and Standards (KATS), Aluminum performance testing method

KS B 8201-2004 Test method of thermal performance for solar storage tanks
KS B 8200-2006 Test method of thermal performance for solar collectors
KS B 8201-1999 Test method of thermal performance for solar storage tanks
KS D 8321-2002 Testing methods for aluminium spray products
KS D 8321-1982 Testing methods for aluminium spray products
KS C 6596-2007 Performance requirements for carbon monoxide detection instrument(50∼1 000 ppm full scale)
KS Q ISO 11843-2:2009 Capability of detection－Part 2：Methodology in the linear calibration case
KS B 0521-2013 Methods of ultrasonic angle beam examinationfor welds of aluminium pipes and tubes
KS C 6592-2007 Performance requirements for toxic gas-Detection instruments：Hydrogen sulfide
KS B 0522-2013 Methods of ultrasonic examinationfor T type welds of aluminium plates
KS D 0245-1992(2012) Method of radiographic testing for aluminium T-welds
KS D 0245-1982 Method of radiographic testing for aluminium T-welds
KS B 0521-1994 Methods of ultrasonic angle beam testing and classification of test results for welds of aluminium pipes and tubes
KS B 0534-1995 Method for assessing the overall performance characteristics of ultrasonic pulse echo testing instrument
KS B 0522-1994 Method of ultrasonic testing and classification of test results for T type welds in aluminium plates
KS F 2292-2008 Test method of air tightness for windows and doors
KS F 2292-2013 The method of air tightness for windows and doors
KS F 2293-2008 Test method of water tightness for windows and doors
KS D 2571-2003 METHODS FOR DETERMINATION OF PHYSICAL PROPERTIES OF ALUMINIUM OXIDE
KS D 0241-2016 Methods for radiographic test and classification by radiographs of aluminium castings
KS B 6721-1994 Testing methods of activated sludge process equipments
KS F 2835-2015 Reaction to fire tests for building products exposed to the thermal attack by a single burning item
KS R 9241-2005 Method of performance test and inspection methodsfor cast iron brake shoes of railway rolling stock
KS F 2835-2009 Reaction to fire tests for building products exposed to the thermal attack by a single burning item
KS Q ISO 11843-2-2009(2019) Capability of detection－Part 2：Methodology in the linear calibration case
KS Q ISO 11843-5:2012 Capability of detection-Part 5:Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5:2018 Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5-2023 Detection Capabilities Part 5: Methodology in Linear and Nonlinear Calibration Vessels
KS L 1606-1993 Testing method for wear resistance of high performance ceramics by ball-on-disk method
KS J 4206-2008 Testing methods for antibacterial activity of antibacterial functional products-Part 1:Shake flask method
KS B 6101-1990 Method of measuring performance for dust collectors
KS E 3115-2006 Method of performance test for rock drill
KS E 3115-1981 Method of performance test for rock drill
KS B 6101-1985 Method of measuring performance for dust collectors
KS M 2800-1-2007 Determination of aromatic hydrocarbon types in oil spill dispersant-High performance liquid chromatography method with refrN index detection
KS Q ISO 11843-7:2013 Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise

国家市场监督管理总局、中国国家标准化管理委员会, Aluminum performance testing method

GB/T 37365-2019 Die casting unit—Performance testing method
GB/T 40268-2021 Determination of performance on immunomagnetic material
GB/T 36986-2018 Dynamic testing methods of brake performance for automobiles
GB/T 12967.4-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 4: Determination of ultraviolet light and heat resistance
GB/T 8484-2020 Test method for thermal insulating performance for building exterior doors and windows
GB/T 39849-2021 Non-destructive testing instruments—Ultrasonic time-of-flight diffraction instrument—Methods of performance tests
GB/T 40332-2021 Non-destructive testing—Ultrasonic testing—Characterization and verification of ultrasonic thickness measuring equipment
GB/T 36987-2018 Testing methods of anti lock braking system(ABS) performance for automobiles
GB/T 38264-2019 Classification and test method of resistance against impact for curtain wall
GB/T 41310-2022 Image-based test method for vision module photoelectric performance
GB/T 39585-2020 Opto-electronic measurement—Performance requirements and test methods of light distribution measurement system
GB/T 15227-2019 Test method of air permeability, watertightness, wind load resistance performance for curtain walls
GB/T 12967.1-2020 Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys―Part 1: Measurement of abrasion resistance
GB/T 7106-2019 Test methods of air permeability,watertightness,wind load resistance performance for building external windows and doors
GB/T 39526-2020 Classification and test method for airborne sound insulation performance of curtain wall
GB/T 12967.5-2022 Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 5:Assessment of resistance to cracking
GB/T 39969-2021 Test method of ventilation and rain resistance performance for ventilation louvers of building
GB/T 37471-2019 Intelligent transportation systems—Lane change decision aid systems—Performance requirements and test procedures
GB/T 39794.2-2021 Test method for wind uplift resistance of mental roof—Part 2: Dynamic pressure method
GB/T 39794.1-2021 Test method for wind uplift resistance of metal roof—Part 1 :Static pressure method
GB/T 37436-2019 Intelligent transportation systems—Extended-range backing aid systems—Performance requirements and test procedures
GB/T 6609.2-2022 Chemical analysis methods and determination of physical performance of alumina—Part 2: Determination of loss of mass at 300 ℃ and 1000 ℃
GB/T 41504-2022 Test method of burglar resistance for building external windows, doors and shutters
GB/T 39283-2020 Non-destructive testing—Testing method for surface-wave testing using electromagnetic acoustic transducer (EMAT) techniques

Professional Standard - Non-ferrous Metal, Aluminum performance testing method

YS/T 438-2001 Determination method of physical properties of sandy alumina
YS/T 455.2-2003 Test method for aluminium foil Part 2:Test method for porosity
YS/T 438.5-2001 Methods for physical performance determination of sandy alumina.Determination of α-alumina content.X-ray diffraction spectrum method
YS/T 581.4-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 4:Determination of aluminium by the EDTA volumetric method
YS/T 617.1-2007 Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and AI-Mg alloy powder.Part 1: Determination of active AI, Mg or AI-Mg content.Gasometric method
YS/T 438.3-2001 Methods for physical performance determination of sandy alumina.Determination of the angle of repose
YS/T 581.17-2010 Determination of chemical contents and physical properties of aluminium fluoride- Part 17: Determination of flow time
YS/T 63.13-2016 Test methods for carbon materials for aluminum - Part 13: Determination of elastic modulus
YS/T 438.1-2001 Methods for physical performance determination of sandy alumina.Determination of size distribution.Sieving method
YS/T 581.15-2007 Determination of chemical contents and physical properties of aluminium fluoride.Part 15: Free alumina content
YS/T 438.2-2001 Methods for physical performance determination of sandy alumina.Determination of the attrition index
YS/T 438.4-2001 Methods for physical performance determination of sandy alumina.Determination of specific surface area.B.E.T. method
YS/T 617.9-2007 Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and AI-Mg alloy powder.Part 9: Determination of adhesion ratio of aluminum powder
YS/T 63-1993 Roasting method for test sample of carbon paste for aluminum electrolysis
YS/T 438.5-2013 Methods for physical performance determination of Sandy alumina.Part 5:X-ray diffraction spectrum method for determination of α-alumina content
YS/T 617.10-2007 Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and AI-Mg alloy powder.Part 10: Determination of coating surface of aluminum powder
YS/T 581.2-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 2:Determination of ignition loss
YS/T 581.13-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 13:Measurement of the angle of repose
YS/T 581.3-2012 Determination of chemical contents and physical properties of aluminium fluoride.Part 3:Determination of fluoride content
YS/T 617.5-2007 Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and AI-Mg alloy powder.Part 5: Determination of grease content of aluminum powder
YS/T 63.11-2006 Carbonaceous materials used in the production of aluminium-Part 11:Sidewall blocks and prebaked anodes-Determination of the reactivity to air-Loss in mass method
YS/T 438.3-2013 Methods for physical performance determination of sandy alumina.Part 3:Determination of the angle of repose
YS/T 581.14-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 14:Determination of untamped density
YS/T 273.4-2006 Chemical analysis methods and physical properties of cryolite. Part 4:Determination of aluminium by the EDTA volumetric method
YS/T 438.1-2013 Methods for physical performance determination of sandy alumina.Part 1:Determination of size distribution-sieving method
YS/T 581.1-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 1:Determination of moisture content by gravimetric method
YS/T 581.12-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 12:Determination of size distribution-Sieving method
YS/T 438.2-2013 Methods for physical performance determination of sandy alumina.Part 2:Determination of the attrition index
YS/T 438.4-2013 Methods for physical performance determination of sandy alumina.Part 4:B.E.T method for determination of specific surface area
YS/T 617.2-2007 Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and AI-Mg alloy powder.Part 2: Determination of aluminum content of AI-Mg alloy powders.Fluoride replacement-complexometric method
YS/T 63.23-2012 Carbonaceous materials used in the production of aluminium.Part 23:Baked anodes.Determination of the reactivity to air.Thermogravimetric method
YS/T 120-1992 Energy Balance Test and Calculation Method of Aluminum Electrolyzer
YS/T 63.26-2012 Carbonaceous materials used in the production of aluminium.Part 26:Dense refractory bricks.Determination of cryolite resistance
YS/T 63.20-2006 Carbonaceous materials used in the production of aluminium. Part 20:Determination of sulfur content
YS/T 63.20-2023 Carbonaceous materials used for the production of aluminium — Part 20:Determination of sulfur content
YS/T 273.10-2006 Chemical analysis methods and physical properties of cryolite. Part 10:Determination of alumina content by gravimetric method
YS/T 63.21-2007 Carbonaceous materials used in the production of aluminium. Part 21: Cathodic pastes. Determination of expansion/shrinkage during baking
YS/T 63.13-2006 Carbonaceous materials used in the production of aluminium-Part 13:Determination of young's modulus-Statical modulus method
YS/T 617.8-2007 Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and Al-Mg alloy powder.Part 8: Determination of apparent density
YS/T 617.3-2007 Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and Al-Mg alloy powder.Part 3: Determination of volatile matter (water) content.Drying-degravimetric method
YS/T 617.6-2007 Determination of chemical compositions and physical properties of aluminum powder, magnesium powder and AI-Mg alloy powder.Part 6: Determination of particle size distribution.Sieve method
YS/T 581.3-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 3:Determination of fluoride content distillation-thorium nitrate titration volumetric method
YS/T 581.8-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 8:Determination of sulphate content by barium sulphate gravimetric method
YS/T 63.17-2006 Carbonaceous materials used in the production of aluminium. Part 17:Determination of volatile matter content
YS/T 63.24-2012 Carbonaceous materials used in the production of aluminium.Part 24:Baked anodes.Determination of the reactivity to carbon dioxide.Thermogravimetric method
YS/T 581.11-2006 Determination of chemical contents and physical properties of aluminium fluoride Part 11:Preparation and storage of test samples
YS/T 63.3-2006 Carbonaceous materials used in the production of aluminium-Part 3:Determination of the thermal conductivity using a comparative method

Professional Standard - Agriculture, Aluminum performance testing method

JAP-088 Phosphoethylaluminum (triethylaluminum phosphate) detection method
306药典四部-2020 4000 Testing methods for pharmaceutical packaging materials 4005 Determination of tensile properties
LS/T 6142-2023 Performance Evaluation of Rapid Detection Method for Grain Mycotoxins
SN/T 5080-2018 Import and export alkaline and non-acid secondary battery power detection method
SN/T 3253.1-2012 Test methods for performance of sanitary ceramics - Part 1: Chemical resistance and pollution resistance

Professional Standard - Machinery, Aluminum performance testing method

JB/T 12562-2015 Low pressure die-casting machine.Testing methods of technology capability
JB/T 8283-1999 Methods for testing the operating characteristics of acoustic emission instrumentation
JB/T 12607-2016 Inspection methods for performance parameters of superhard tools material
JB/T 12613-2016 Inspection methods for performance parameters of ceramic tools material
JB/T 5525-2011 Non-destructive testing instruments characteristics measured method for one-channel eddy current testing instrument
JB/T 12612-2016 Inspection methods for cutting tool coating material performance
JB/T 11606-2013 Non-destructive testing instruments.Metal magnetic memory instrument verification
JB/T 12457-2015 Non-destructive testing instruments.Testing method of X-ray delector for circuit board detection
JB/T 12244-2015 Test method for cupola performance
JB/T 9214-2010 Non-destructive testing.Test methods for evaluating performance characteristics of A-scan pulse-echo ultrasonic testing systems

Professional Standard-Safe Production, Aluminum performance testing method

AQ 5215-2013 Safety performance testing method for spray booth
AQ/T 5215-2013 Testing method for safety performance of spray booth
AQ 5214-2013 Safety performance test method of drying oven
AQ/T 5214-2013 Testing method for safety performance of drying equipment
AQ 5212-2011 Test requirements and methods for safety performance of ventilation and purification equipment
AQ/T 5212-2011 Requirements and methods for safety performance testing of ventilation and purification devices

Professional Standard - Speciality, Aluminum performance testing method

ZB Q14002.4-1988 Quality testing method of concrete components of farm buildings Mechanical performance testing method

Professional Standard - Construction Industry, Aluminum performance testing method

JG/T 440-2014 Test method for shading performance of windows and doors
JG/T 192-2006 Test method for repeated opening and closing performance of windows and doors
JG/T 412-2013 Building shading product.Resistance to snow load.Test method
JG/T 356-2012 Test methods of building shading product on indoor environment thermal and visual comfort
JG/T 454-2014 On-site test method of sealed insulating glass units for doors, windows and curtain walls in buildings
JG/T 211-2007 Field test method of air permeability, watertightness, wind load resistance performance for exterior windows

British Standards Institution (BSI), Aluminum performance testing method

BS ISO 11843-2:2000 Capability of detection. Methodology in the linear calibration case
BS ISO 11843-5:2008+A1:2017 Capability of detection - Methodology in the linear and non-linear calibration cases
BS ISO 11843-5:2009 Capability of detection. Methodology in the linear and non-linear calibration cases
BS ISO 11843-5:2008 Capability of detection - Methodology in the linear and non-linear calibration cases
BS ISO 11843-7:2012 Capability of detection. Methodology based on stochastic properties of instrumental noise
BS EN 50104:2019+A1:2023 Electrical equipment for the detection and measurement of oxygen. Performance requirements and test methods
BS EN 50104:1999 Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
BS EN 50104:2019 Electrical equipment for the detection and measurement of oxygen. Performance requirements and test methods
BS EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods
BS EN 50104:2002 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
BS EN 12977-5:2012 Thermal solar systems and components. Custom built systems. Performance test methods for control equipment
BS EN 60735:1992 Methods for measurement of video tape properties
BS ISO/IEC 18046-2:2020 Information technology. Radio frequency identification device performance test methods - Test methods for interrogator performance
BS EN 13068-1:2000 Non-destructive testing - Radioscopic testing - Quantitative measurement of imaging properties
BS ISO 11843-7:2018 Tracked Changes. Capability of detection. Methodology based on stochastic properties of instrumental noise

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Aluminum performance testing method

GB/T 22638.3-2016 Test methods for aluminium and aluminium alloy foils—Part 3：Determination of stickiness
GB/T 22638.9-2016 Test methods for aluminium and aluminium alloy foils—Part 9: Determination of hydrophilic property
GB/T 22638.5-2016 Test methods for aluminium and aluminium alloy foils—Part 5：Determination of wettability
GB/T 34824-2017 The test method of wind load resistance performance for screens of windows and doors
GB/T 35623-2017 Test methods for protection performance against toxic gas of public shelters
GB/T 35118-2017 Test methods of optical performance for Erbium-doped Yttrium Aluminum Garnet laser crystal
GB/T 22638.2-2016 Test methods for aluminium and aluminium alloy foils—Part 2: Determination of pinhole
GB/T 35349-2017 Parking brake performance test methods for vehicles
GB/T 34555-2017 Test method of air permeability, watertightness,wind load resistance performance for building skylight system
GB/T 34799-2017 Determination of the activity of chitinase
GB/T 35382-2017 Test methods for energy consumption of blow moulding machines for plastics
GB/T 33580-2017 Testing and measuring methods of energy consumption for rubber and plastics extruder

RU-GOST R, Aluminum performance testing method

GOST 21342.3-1987 Variable resistors. Test methods for resistance law
GOST R ISO 11843-5-2012 Statistical methods. Capability of detection. Part 5. Methodology in the linear and non-linear calibration cases
GOST R 56139-2014 Functional foods. Methods for detection and enumeration of probiotic microorganisms
GOST ISO 11843-4-2005 Statistical methods. Capability of detection. Methodology for comparing the minimum detectable value with a given value
GOST R 55808-2013 Nondestructive testing. Ultrasonic transducers. Test methods
GOST R ISO 11843-2-2007 Statistical methods. Capability of detection. Part 2. Methodology in the linear calibration case

Tianjin Provincial Standard of the People's Republic of China, Aluminum performance testing method

DB12/T 603-2015 Test method for flammability of infant clothing
DB12/ 038-2000 Safety performance requirements and testing methods of lightning protection facilities

工业和信息化部, Aluminum performance testing method

YS/T 1187-2017 Ultrasonic testing method for aluminum and aluminum alloy thin-walled pipes
JB/T 13249-2018 Method for measuring energy consumption of die-casting aluminum furnaces
YS/T 1309-2019 Testing method for insulation properties of titanium and titanium alloy coatings
YS/T 581.15-2021 Methods for chemical analysis and determination of physical properties of aluminum fluoride Part 15: Determination of free alumina content
YS/T 1188-2017 Ultrasonic testing method for deformed aluminum alloy ingots
YS/T 1421-2021 Test method for energy consumption of carbon roasting for aluminum
YB/T 4812-2020 Comprehensive performance testing method for steel plate automatic ultrasonic inspection system
YS/T 63.27-2015 Testing methods for carbon materials for aluminum use Part 27: Determination of fracture energy of prebaked anodes
YS/T 581.3-2021 Methods of chemical analysis and determination of physical properties of aluminum fluoride Part 3: Determination of fluorine content
YB/T 4289-2020 Comprehensive performance testing method of automatic magnetic flux leakage detection system for steel pipes and steel rods
YB/T 4083-2020 Comprehensive performance testing method of automatic eddy current testing system for steel pipes and steel rods
YB/T 4082-2020 Comprehensive performance testing method of automatic ultrasonic inspection system for steel pipes and steel rods
JB/T 13247-2018 Low pressure casting machine energy consumption detection method
YS/T 273.4-2020 Methods of chemical analysis and physical properties of cryolite Part 4: Determination of aluminum content EDTA titration method
YS/T 1065.5-2019 Methods for testing physical and chemical properties of zeolites Part 5: Determination of Al3+ content EDTA volumetric method
QB/T 5344-2018 Testing method for retort resistance of liquid ink
QB/T 5039-2017 LED lamp performance test method
YS/T 63.17-2019 Testing methods for carbon materials used in aluminum - Part 17: Determination of volatile matter
YS/T 63.3-2016 Testing methods for carbon materials for aluminum use Part 3: Comparative method for determination of thermal conductivity

国家质量监督检验检疫总局, Aluminum performance testing method

SN/T 3253.3-2016 Testing methods for performance of sanitary ceramics Part 3: Testing method for maximum flushing function
SN/T 4550-2016 Safety performance testing methods for import and export of alkaline and non-acid secondary batteries
SN/T 2558.12-2016 Functional testing methods for imported and exported textiles Part 12: Breathability
SN/T 2558.10-2015 Functional testing methods for imported and exported textiles Part 10: Water absorbency
SN/T 2558.11-2015 Functional testing methods for imported and exported textiles Part 11: Anti-water, anti-oil, and easy-to-remove oil properties

Professional Standard - Electron, Aluminum performance testing method

SJ 1285-1977 Test methods for electric insulating property of aluminium alloy anodizing
SJ/T 11061-1996 Inspection method of solar cell electrical performance testing equipment
SJ/T 31307-1994 Requirements of readiness and methods of inspection and assessment for aluminum electrolysis capacitor aluminum foil energizing machines
SJ/T 31168-1994 Requirements of readiness and methods of inspection and assessment for the power source used to test the electrical properties of transmitting tubes

International Organization for Standardization (ISO), Aluminum performance testing method

ISO 11843-2:2000 Capability of detection - Part 2: Methodology in the linear calibration case
ISO 2376:1972 Anodization (anodic oxidation) of aluminium and its alloys; Insulation check by measurement of breakdown potential
ISO 11843-5:2008 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases

RO-ASRO, Aluminum performance testing method

STAS 6926/12-1970 Motor vehicles. Testing methods DETERMINATION OF BRAKING EFFICIENCY
STAS 7246/9-1974 THREE-PHASE INDUCTION MOTORS Methods of test Eeteimination of on load performances

Professional Standard - Petroleum, Aluminum performance testing method

SY/T 5281-2000 Bottle test method for the demulsification performance of crude oil demulsifiers
SY 5390-1991 Drilling Fluid Corrosion Performance Test Method Drill Pipe Corrosion Ring Method
SY/T 5390-1991 Drilling Fluid Corrosion Performance Test Method Drill Pipe Corrosion Ring Method
SY/T 4113.11-2023 Test methods for performance of pipeline anti-corrosion layers Part 11: Leak point detection

Association Francaise de Normalisation, Aluminum performance testing method

NF H34-068*NF EN 15653:2009 Packaging - Flexible aluminium tubes - Test method to check the resistance of the internal protective coating against ammonia.
NF ISO 11843-5:2008 Capacité de détection - Partie 5 : méthodologie des étalonnages linéaire et non linéaire
NF X06-048-2*NF ISO 11843-2:2000 Capability of detection - Part 2 : methodology in the linear calibration case
NF C23-564:1995 Electrical apparatus for the detection and measurement of oxygen performance requirements and test methods.
NF EN 50104/A1:2023 Appareils électriques de détection et de mesure de l'oxygène - Exigences d'aptitude à la fonction et méthodes d'essai
NF EN 50104:2019 Appareils électriques de détection et de mesure de l'oxygène - Exigences d'aptitude à la fonction et méthodes d'essai
NF H34-055*NF EN 12375:2009 Packaging - Flexible aluminium tubes - Wall thickness determination method
NF Q51-001:1969 ASBESTOS BOARD. GENERAL CHARACTERISTICS AND TEST METHODS.
NF ISO 11843-5/A1:2017 Capacité de détection - Partie 5 : méthodologie des étalonnages linéaire et non linéaire - Amendement 1
NF C23-564*NF EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
NF EN 12375:2009 Emballage - Tubes souples en aluminium - Méthode de détermination de l'épaisseur de paroi
NF X06-048-5*NF ISO 11843-5:2008 Capability of detection - Part 5 : methodology in the linear and non-linear calibration cases
NF EN IEC 63300:2023 Méthodes d\'essai des propriétés électriques et magnétiques des noyaux en poudre magnétique

Indonesia Standards, Aluminum performance testing method

SNI 07-1176-1989 Aluminium and aluminium alloys, Tensile test method
SNI 05-6079-1999 Performance test method for glue system shoes' sole hydraulic press machines

HU-MSZT, Aluminum performance testing method

Professional Standard - Aerospace, Aluminum performance testing method

QJ 990.8-1986 Coating inspection method Coating electrical insulation performance inspection method
QJ 20003-2011 Test method for magnetic properties of spacecraft
QJ 20045-2011 Ultrasonic phased array testing for friction stir welding of aluminium alloys

海关总署, Aluminum performance testing method

SN/T 2558.13-2022 Functional testing methods for imported and exported textiles Part 13: Temperature regulating performance

Professional Standard - Ocean, Aluminum performance testing method

HY/T 233-2018 Test methods of ultrafiltration membrane performance—Part 1:General
HY/T 0279-2019 Test methods for measurement of electrical properties of high frequency ground wave radar
HY/T 0303-2021 Testing method for the performance of bacterial retention of hollow fiber microfiltration membrane module

German Institute for Standardization, Aluminum performance testing method

DIN ISO 11843-2:2006 Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000; text in German, English)
DIN EN 61830:1998 Microwave ferrite components - Measuring methods for major properties (IEC 61830:1997); German version EN 61830:1998
DIN EN 12370:1999 Natural stone test methods - Determination of resistance to salt crystallisation; German version EN 12370:1999
DIN ISO 11843-2 Berichtigung 1:2008-06 Capability of detection - Part 2: Methodology in the linear calibration case (ISO 11843-2:2000), Corrigenda to DIN ISO 11843-2:2006-06 (ISO 11843-2:2000/Cor. 1:2007; text in German, English)
DIN EN 12375:2009-08 Packaging - Flexible aluminium tubes - Wall thickness determination method; German version EN 12375:2009
DIN ISO 11843-5:2010-08 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases (ISO 11843-5:2008); Text in German and English
DIN EN 15653:2009-07 Packaging - Flexible aluminium tubes - Test method to check the resistance of the internal protective coating against ammonia; German version EN 15653:2009
DIN EN 60735:1992 Measuring methods for video tape properties (IEC 60735:1991); german version EN 60735:1991

ZA-SANS, Aluminum performance testing method

SANS 11843-2:2009 Capability of detection Part 2: Methodology in the linear calibration case
SANS 11843-5:2009 Capability of detection Part 5: Methodology in the linear and non-linear calibration cases

Military Standard of the People's Republic of China-General Armament Department, Aluminum performance testing method

GJB 961-1990 Testing method for electrothermal performance of aircraft electrically heated glass
GJB 9213-2017 Electrical performance inspection method for military VHF/UHF frequency band monitoring equipment
GJB 5018-2003 Inspection method for ballistic performance of stock artillery shells
GJB 130.9-1986 Test method for bending properties of glued aluminum honeycomb sandwich structures
GJB 130.10-1986 Test method for lateral pressure performance of glued aluminum honeycomb sandwich structures
GJB 130.1-1986 General principles for performance test methods for bonded aluminum honeycomb sandwich structures and aluminum honeycomb cores
GJB 8480-2015 Performance test method of compact range
GJB 10105-2021 Bulletproof performance V50 test method
GJB 10131-2022 Bulletproof performance V50 test method

Chongqing Provincial Standard of the People's Republic of China, Aluminum performance testing method

DB50/T 628-2015 Test method for metrological performance of rapid pesticide residue detector

TR-TSE, Aluminum performance testing method

TS 2393-1976 ANODIZATION (ANODIC OXIDATION) OF ALUMINI?M AND ITS ALLOYS INSULATION CHECK BY MEASUREMENT OF BREAKDOWN POTENTIAL

Guangdong Provincial Standard of the People's Republic of China, Aluminum performance testing method

DB44/T 1665-2015 Method for detecting energy consumption of die casting machine
DB44/T 1757-2015 Comprehensive performance requirements and testing methods of electric vehicles in operation
DB44/T 1209-2013 Energy Efficiency Detection and Evaluation Method for Fan Units
DB44/T 1227-2013 Detection and Evaluation Method of Energy Consumption in Hotel and Tourism Industry
DB44/T 1211-2013 Energy Efficiency Detection and Evaluation Method of Water Pump Unit

SE-SIS, Aluminum performance testing method

SIS SS-IEC 936:1991 Shipborne radar - Operational and performance requirements - Methods of test and required test results

Professional Standard - Traffic, Aluminum performance testing method

JT/T 885-2014 Safety detecting requirements and methods for commercial semi-trailer

Professional Standard - Aquaculture, Aluminum performance testing method

SC/T 9008.1-1997 Methods of testing for main heat engineering perfomance on cold storage.Temperature testing
SC/T 9008.2-1997 Methods of testing for main heat engineering perfomance on cold storage.Air velocity testing
SC/T 9008.3-1997 Methods of testing for main heat engineering perfomance on cold storage.Heat flux testing for envelope construction

Professional Standard - Ferrous Metallurgy, Aluminum performance testing method

YB/T 090-1996 Test method for performance of worm reducer

冶金工业部, Aluminum performance testing method

YB/T 0090-1996 Performance inspection method of worm reducer

American National Standards Institute （ANSI), Aluminum performance testing method

ANSI/ASHRAE 173P-2012 Method of Test to Determine the Performance of Halocarbon Refrigerant Leak Detector
ANSI/ASTM F2473:2012 Test Method for Performance of Water-Bath Rethermalizers
ANSI/ASTM F1965:2006 TEST METHOD FOR PERFORMANCE OF DECK OVENS

国家能源局, Aluminum performance testing method

NB/T 11034-2022 On-site detection and evaluation method of thermal performance of household solar water heating system

能源部, Aluminum performance testing method

SY 5281-1991 Demulsifier performance testing method Bottle test method

Danish Standards Foundation, Aluminum performance testing method

DS/ISO 11843-2/Corr. 1:2007 Capability of detection - Part 2: Methodology in the linear calibration case
DS/ISO 11843-2:2003 Capability of detection - Part 2: Methodology in the linear calibration case
DS/EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
DS/EN 12375:2009 Packaging - Flexible aluminium tubes - Wall thickness determination method
DS/ISO 11843-5:2008 Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases
DS/EN 15653:2009 Packaging - Flexible aluminium tubes - Test method to check the resistance of the internal protective coating against ammonia
DS/ISO 11843-7:2012 Capability of detection - Part 7: Methodology based on stochastic properties of instrumental noise

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Aluminum performance testing method

ASHRAE 173-2012 Method of Test to Determine the Performance of Halocarbon Refrigerant Leak Detectors

Shandong Provincial Standard of the People's Republic of China, Aluminum performance testing method

DB37/T 3724-2019 On-site rapid detection method for combustion performance of external wall insulation materials

未注明发布机构, Aluminum performance testing method

BS ISO 11843-2:2000(2008) Capability of detection — Part 2 : Methodology in the linear calibration case

Professional Standard - Commodity Inspection, Aluminum performance testing method

SN/T 2558.8-2015 Functional testing methods for import and export textiles Part 8: Formaldehyde removal performance of photocatalysts
SN/T 0481.6-1995 Methods for inspection of bauxite for export.Rapid determination of bulk density of alumina1995-09-06
SN/T 1730.8-2006 Safety performance test for export fireworks and firecrackers--Part 8:Composition charge
SN/T 1730.8-2014 Test methods for the safety performance of export fireworks and firecrackers - Part 8: Product dose testing
SN/T 2558.5-2013 Testing method for import and export funct ional teotiles.Part 5:Dertermination of deodorant rate.Detector tube
SN/T 2867-2011 Qualitative identification of fish derived material in feedstuff-PCR method
SN/T 1730.10-2006 Safety performance test for export fireworks and firecrackers - Part 10 : Safety performance for use
SN/T 1730.10-2014 Inspection methods for safety performance of export fireworks and firecrackers Part 10: Inspection of safety performance in use
SN/T 2558.9-2015 Testing method for import and export functional textiles.Part 9:Antibacterial activity in textiles for import and export.Impedance method
SN/T 2558.3-2012 Method for the inspection of functional textiles for import and export.Part 3:Iron-free performance

YU-JUS, Aluminum performance testing method

JUS H.D8.115-1987 Electric detonators. Methods of testing. Test ofsensitiveness to drop
JUS G.E2.236-1983 Conveyor belts. Heat resistance. Method of test

Lithuanian Standards Office , Aluminum performance testing method

LST EN 50104-2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
LST EN 12375-2009 Packaging - Flexible aluminium tubes - Wall thickness determination method
LST EN 15653-2009 Packaging - Flexible aluminium tubes - Test method to check the resistance of the internal protective coating against ammonia

AENOR, Aluminum performance testing method

UNE-EN 50104:2011 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
UNE-EN 12375:2009 Packaging - Flexible aluminium tubes - Wall thickness determination method
UNE-EN 15653:2009 Packaging - Flexible aluminium tubes - Test method to check the resistance of the internal protective coating against ammonia

CENELEC - European Committee for Electrotechnical Standardization, Aluminum performance testing method

PREN 50104-2018 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods
EN 50104:1995 Electrical Apparatus for the Detection and Measurement of Oxygen Performance Requirements and Test Methods
EN 50104:1998 Electrical Apparatus for the Detection and Measurement of Oxygen - Performance Requirements and Test Methods
EN 50104:2002 Electrical Apparatus for the Detection and Measurement of Oxygen - Performance Requirements and Test Methods
EN 50291:2001 Electrical Apparatus for the Detection of Carbon Monoxide in Domestic Premises - Test Methods and Performance Requirements

European Committee for Standardization (CEN), Aluminum performance testing method

EN 50194:2000 Electrical Apparatus for the Detection of Gases in Domestic Premises - Test Methods and Performance Requirements
prEN 50104-1992 Electrical apparatus for the detection and measurement of oxygen; performance requirements and test methods
PD CEN/TS 12633:2014 Method of polishing specimens prior to the measurement of slip and skid resistance

ES-UNE, Aluminum performance testing method

UNE-EN 50104:2021/A1:2023 Electrical equipment for the detection and measurement of oxygen - Performance requirements and test methods
UNE-EN 50104:2021 Electrical equipment for the detection and measurement of oxygen - Performance requirements and test methods

PL-PKN, Aluminum performance testing method

PN-EN 12375-2009 P Packaging -- Flexible aluminium tubes -- Wall thickness determination method
PN E04063-13-1987 On-load tap-changers Test methods Check of function

IT-UNI, Aluminum performance testing method

UNI 7519-1976

American Society for Testing and Materials (ASTM), Aluminum performance testing method

ASTM E303-93(2003) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Aluminum performance testing method

GJB 6458.1-2008 Test method of rocket launcher. Part 1: Performance data test for general assembly

Fujian Provincial Standard of the People's Republic of China, Aluminum performance testing method

DB35/T 1920-2020 Imaging performance detection method of ground mobile robot vision system

KR-KS, Aluminum performance testing method

KS Q ISO 11843-5-2018(2023) Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases
KS Q ISO 11843-5-2018 Capability of detection — Part 5: Methodology in the linear and non-linear calibration cases

中国有色金属工业总公司, Aluminum performance testing method

YS 120-1992 Aluminum electrolytic cell energy balance testing and calculation method

Jilin Provincial Standard of the People's Republic of China, Aluminum performance testing method

DB22/T 1550-2012 Comprehensive performance testing of commercial vehicles Vehicle appearance and chassis inspection methods and evaluation

European Committee for Electrotechnical Standardization（CENELEC）, Aluminum performance testing method

EN 50104:2010 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods

Standard Association of Australia （SAA）, Aluminum performance testing method

AS/NZS 5341:2021 LED lamps — Test methods — Energy and functional performance

CZ-CSN, Aluminum performance testing method

CSN 36 1186-1981 Methods of measurement of performance of coffee grinders

CEN - European Committee for Standardization, Aluminum performance testing method

EN 15653:2009 Packaging - Flexible aluminium tubes - Test method to check the resistance of the internal protective coating against ammonia

AT-ON, Aluminum performance testing method

ONORM EN 43-1986 Methods of testing doors; behavlour under humidity variations of door leaves placed in successive uniform climates