ZH
RU
ES
How does the balance measure
How does the balance measure, Total:65 items.
In the international standard classification, How does the balance measure involves: Acoustics and acoustic measurements, Geology. Meteorology. Hydrology, Gas and steam turbines. Steam engines, Fuels, Corrosion of metals, Telecommunication systems, Components and accessories for telecommunications equipment, Raw materials for rubber and plastics, Environmental protection, Measurement of volume, mass, density, viscosity, Measurement of force, weight and pressure, Air quality, Radiocommunications, Microbiology, Space systems and operations, Aerospace electric equipment and systems.
CU-NC, How does the balance measure
- NC 90-06-44-1986 Metrological Assurance. Analytical Balances. Measurement Methods
IET - Institution of Engineering and Technology, How does the balance measure
Professional Standard - Electron, How does the balance measure
- SJ 20401-1994 Methods of measurement for isolated slot of planar waveguide-fed slot arrays
国家市场监督管理总局、中国国家标准化管理委员会, How does the balance measure
- GB/T 7966-2022 Acoustics—Ultrasonic power measurement—Radiation force balances and the requirements
- GB/T 40602.2-2021 Antennas and reception systems for radio interference—Part 2:Basic measurement—Method for near field measuring high gain antenna pattern in microwave anechoic chamber
Professional Standard - Meteorology, How does the balance measure
- QX/T 307-2015 Observation method of atmospheric aerosol mass concentration.Tapered element oscillating microbalance
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, How does the balance measure
- GB/T 7966-2009 Acoustics.Ultrasonics power measurement.Radiation force balances and performance requirements
American National Standards Institute （ANSI), How does the balance measure
- ANSI/ASTM D7739:2011 Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
American Society for Testing and Materials (ASTM), How does the balance measure
- ASTM B808-10 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
- ASTM D7739-11 Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
- ASTM E2101-00 Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
- ASTM E2101-00(2005) Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
- ASTM D7739-11(2020) Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
- ASTM B808-05 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
- ASTM B808-97 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
- ASTM B808-97(2003) Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
- ASTM B808-10(2015) Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
- ASTM D7739-11(2016) Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
- ASTM E2101-14 Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
- ASTM D6831-05a Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
- ASTM D6831-05 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
- ASTM D6831-02 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
- ASTM D6831-11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
- ASTM D6831-11(2018) Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
Association Francaise de Normalisation, How does the balance measure
- NF C93-557-6*NF EN 62037-6:2014 Passive RF and microwave devices, intermodulation level measurement - Part 6 : measurement of passive intermodulation in antennas
- FD T66-080:2016 Bituminous emulsions - Determination of water content - Evaporation procedure using drying balance
- NF C93-557-6*NF EN IEC 62037-6:2022 Passive RF and microwave devices, intermodulation level measurement - Part 6 : measurement of passive intermodulation in antennas
- NF EN IEC 62037-6:2022 Dispositifs RF et à micro-ondes passifs, mesure du niveau d'intermodulation - Partie 6 : mesure de l'intermodulation passive dans les antennes
- NF P98-613:1993 Horizontal road markings. Railway markings. Reflectivity in rainy conditions: On-site measurement methods
- NF T66-082*NF EN 16849:2016 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
- NF P98-611:1993 Horizontal road signs. Railway signs. Visibility of signs in clear weather conditions: In situ dynamic measurement methods
- NF EN 16849:2016 Bitumes et liants bitumineux - Détermination de la teneur en eau des émulsions de bitume - Méthode par évaporation à la balance dessiccatrice
British Standards Institution (BSI), How does the balance measure
- BS EN IEC 62037-6:2022 Tracked Changes. Passive RF and microwave devices, intermodulation level measurement. Measurement of passive intermodulation in antennas
- BS EN 62037-6:2013 Passive RF and microwave devices, intermodulation level measurement. Measurement of passive intermodulation in antennas
- BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
- 20/30409226 DC BS EN IEC 62037-6. Passive RF and microwave devices, intermodulation level measurement. Part 6. Measurement of passive intermodulation in antennas
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., How does the balance measure
- ASHRAE 4256-1999 Measurements of Volatile Organic Compound (VOC) Emissions from Wood Stains Using an Electronic Balance
Danish Standards Foundation, How does the balance measure
- DS/EN 62037-6:2013 Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas
European Committee for Electrotechnical Standardization（CENELEC）, How does the balance measure
- EN 62037-6:2013 Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas
International Electrotechnical Commission (IEC), How does the balance measure
- IEC 62037-6:2021 RLV Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas
- IEC 62037-6:2021 Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas
- IEC 62037-6:2013 Passive R.F. and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas
AENOR, How does the balance measure
- UNE-EN 62037-6:2015 Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas
ES-UNE, How does the balance measure
- UNE-EN IEC 62037-6:2022 Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas
- UNE-EN 16849:2017 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
International Organization for Standardization (ISO), How does the balance measure
- ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
- ISO 16564:2004/Amd 1:2006 Rubber, raw natural — Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) — Amendment 1
- ISO 12208:2015 Space systems - Space environment (natural and artificial) - Observed proton fluences over long duration at GEO and guidelines for selection of confidence level in statistical model of solar proton fluences
- ISO/TS 12208:2011 Space systems - Space environment (natural and artificial) - Observed proton fluences over long duration at GEO and guideline for selection of confidence level in statistical model of solar proton fluences
Korean Agency for Technology and Standards (KATS), How does the balance measure
- KS M ISO 16564:2007 Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
- KS M ISO 16564-2007(2022) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
- KS M ISO 16564-2007(2017) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
RU-GOST R, How does the balance measure
- GOST 8.453-1982 State system for ensuring the uniformity of measurements. Balance for static weighting. Methods and means for verification
未注明发布机构, How does the balance measure
- BS ISO 16564:2004(2006) Rubber, raw natural — Determination of averagemolecularmass and molecular - mass distribution by size exclusion chromatography (SEC)
European Committee for Standardization (CEN), How does the balance measure
- EN 3475-802:2002 Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 802: Capacitance Unbalanced
CEN - European Committee for Standardization, How does the balance measure
- EN 3475-802:2009 Aerospace series - Cables@ electrical@ aircraft use - Test methods - Part 802: Capacitance unbalance
- PREN 16849-2015 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
Standard Association of Australia （SAA）, How does the balance measure
- AS 3580.9.8:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
- AS/NZS 3580.9.13:2013
- AS/NZS 3580.9.13:2022 Methods for sampling and analysis of ambient air, Method 9.13: Determination of suspended particulate matter — PM2.5 continuous direct mass method using a tapered element oscillating microbalance monitor
- AS 3580.9.8:2022 Methods for sampling and analysis of ambient air, Method 9.8: Determination of suspended particulate matter — PM10 continuous direct mass method using a tapered element oscillating microbalance analyser
工业和信息化部, How does the balance measure
- YD/T 2827.6-2015 Methods for measuring passive intermodulation levels of radio frequency and microwave devices for wireless communications Part 6: Antennas
German Institute for Standardization, How does the balance measure
- DIN EN 16849:2016-12 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance; German version EN 16849:2016
- DIN EN 62037-6:2013 Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas (IEC 62037-6:2013); German version EN 62037-6:2013
- DIN EN 3475-802:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance; German and English version EN 3475-802:2009