ZH
RU
ES
cover plate
cover plate, Total:333 items.
In the international standard classification, cover plate involves: Shipbuilding and marine structures in general, Elements of buildings, Fluid storage devices, Non-metalliferous minerals, Rubber and plastics products, Textile machinery, Structure and structure elements, Industrial trucks, Electrical accessories, Printed circuits and boards, Paper and board, Powder metallurgy, Construction materials, Reinforced plastics, Wastes, Plastics, Glass, Chipless working equipment, Equipment for the chemical industry, Inorganic chemicals, Springs, Components for aerospace construction, Continuous handling equipment, Insulating materials, Woodworking equipment, Fluid power systems, Miscellaneous domestic and commercial equipment, Bearings, Organic chemicals, Pipeline components and pipelines, Wood-based panels, Structures of buildings, Road vehicle systems, Capacitors, Rails and railway components, Waxes, bituminous materials and other petroleum products, Non-textile floor coverings, Installations in buildings, Valves, Products of the textile industry, Quantities and units, Internal combustion engines for road vehicles, Road vehicles in general, Energy and heat transfer engineering in general, Earthworks. Excavations. Foundation construction. Underground works, Road engineering, Graphical symbols, Linear and angular measurements, Semi-manufactures of timber, Optical equipment, (No title).
Professional Standard - Aviation, cover plate
Society of Automotive Engineers (SAE), cover plate
Association Francaise de Normalisation, cover plate
- NF P39-501:1987 ROOFING AND CLADDING. ASPHALT SHINGLES. TEST METHODS.
- NF P39-302:1987 ROOFING AND CLADDING. ASPHALT SHINGLES WITH GLASS FELT. SPECIFICATIONS AND BASIS FOR ACCEPTANCE.
- NF P08-102:1963 Roofing. General. Dimensional inspection of corrugated sheets.
- NF EN 517:2007 Accessoires préfabriqués pour couverture - Crochets de sécurité
- NF EN 12058:2015 Produits en pierre naturelle - Dalles de revêtement de sols et d'escaliers - Exigences
- NF P39-201-2:1993 DTU 40-14. Building works. Private contracts. Roof covering made of asphalt shingles. Part 2 : special clauses.
- NF P39-201-1:1993 DTU 40-14. Building works. Roof covering made of asphalt shingles. Part 1 : technical specifications.
- NF G40-027:1975 Textile machinery. Flat card for the spinning of cotton. Nomenclature. Essential characteristics.
- NF C68-152*NF EN 50520:2009 Cover plates and conver tapes for the protection and location warning of buried cables or buried conduits in underground installations
- NF F55-053/A1:1978
- NF C68-152/A1*NF EN 50520/A1:2021 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
- NF C68-152*NF EN 50520:2020 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
- NF G35-111*NF ISO 20253:2017 Textile floor coverings - Blade test - Flocked textile floor covering
- NF P39-301:1979 Shingles of cellulosic fibre reinforced bitumen felt, designated "cellulose based bitumen shingles". Specifications.
- NF P62-099*NF EN 16776:2016 Resilient floor coverings - Heterogeneous polyuretane floor coverings - Specification
- NF S12-024-1:1988 OPTICS AND OPTICAL INSTRUMENTS. MICROSCOPES. COVER GLASSES. PART 1 : DIMENSIONAL TOLERANCES,THICKNESS AND OPTICAL PROPERTIES.
- NF P62-312:2013 Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor coverings - Specification
- NF P62-313:2014 Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications
- NF P62-312*NF EN ISO 10582:2018 Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor covering - Specifications
- NF P62-313*NF EN ISO 10581:2020 Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications
HU-MSZT, cover plate
RO-ASRO, cover plate
- STAS 9073-1985 DOCUMENT COVER BOARD
- STAS 7451-1988 Steel flanges Bl.lND FLANGESXP 6 : NP 10 ; NP 16 : NP 25 ; XP 40 ; NP 64 ; NP 100 and NP 160 Dimensions
- STAS 5661/2-1979 Chemical industry equipinent ROUND MANHOLES WITH DISH-ENDED COVERS AND FIXED SGREWS Forms and dimensions
Japanese Industrial Standards Committee (JISC), cover plate
AASHTO - American Association of State Highway and Transportation Officials, cover plate
Taiwan Provincial Standard of the People's Republic of China, cover plate
Professional Standard - Public Safety Standards, cover plate
German Institute for Standardization, cover plate
- DIN 83408-3:1987 Flaps, weathertight; covers
- DIN 28129:2021-06 Clamp nuts for covers
- DIN 42548:1969-01 Oil drain plug with cover plate
- DIN 28129:1990 Clamp nuts; for covers
- DIN 42548:1969 Oil drain plug with cover plate
- DIN 83419:2018-02 Elastomer gaskets for covers
- DIN 83408-1:1987 Flaps, weathertight; assembly
- DIN 83408-2:1987 Flaps, weathertight; main frames
- DIN 86111:2016 Weld-in deck screw caps for filling and sounding pipes
- DIN 86111:1986 Welded-in deck screw caps for filling and sounding pipes
- DIN EN 501:1994 Roofing products from metal sheet - Specification for fully supported roofing products from zinc sheet; German version EN 501:1994
- DIN 83404-3:2001 Small hatchways - Part 3: Weathertight covers
- DIN 83404-3:2007 Small hatchways - Part 3: Weathertight covers
- DIN 95369:1998 Elastomer mounts - Cap mounts type A
- DIN 83408-3:2017-06 Flaps, weathertight - Part 3: Frame and covers made of aluminium
- DIN 83414-3:2001 Small hatchways for emergency escape, weathertight - Part 3: Cover
- DIN 83408-1:2017 Flaps, weathertight - Part 1: Assembly, dimensions
- DIN 83408-3:2017 Flaps, weathertight - Part 3: Frame and covers made of aluminium
- DIN 83408-2:2017 Flaps, weathertight - Part 2: Main frame and covers made of steel
- DIN 86129:1986 Plug screws and flat sealing rings for welded-in screw caps for filling and sounding pipes
- DIN 86129:2018 Plug screws and flat sealing rings for welded-in screw caps for filling and sounding pipes
- DIN 83222:2006 Hinged flap for working floors, intermediate bottoms and walkways
- DIN ISO 7368:2018 Hydraulic fluid power - Two-port slip-in cartridge valves - Cavities (ISO 7368:2016)
- DIN 46235:1983-07 Cable lugs; for compression connections, cover plate type, for copper conductors
- DIN 3162:1974 Screwed caps for valves for refrigerant circuits, nominal pressure 25 bar
- DIN 28184-5:2010 Tubular heat exchangers with two fixed heads - Part 5: Examples
- DIN CEN/TS 15398:2008 Resilient, textile and laminate floor coverings - Floor covering standard symbols; German version CEN/TS 15398:2008
- DIN 3580:1992 Surface boxes and ground plates; requirements and testing; DVGW code of practice
- DIN EN 50520:2010 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations; German version EN 50520:2009
- DIN EN 16776:2016 Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification
- DIN EN 16776:2016-09 Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification; German version EN 16776:2016
- DIN EN 50520:2020 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations; German version EN 50520:2020
- DIN ISO 7368:2017 Hydraulic fluid power - Two-port slip-in cartridge valves - Cavities (ISO 7368:2016); Text in German and English
- DIN EN ISO 10581:2020-05 Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2019); German version EN ISO 10581:2020
- DIN EN ISO 10582:2018-12 Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10582:2017); German version EN ISO 10582:2018
- DIN 68119:1996 Wood shingles
United States Navy, cover plate
US-FCR, cover plate
Professional Standard - Textile, cover plate
Professional Standard-Ships, cover plate
SE-SIS, cover plate
Korean Agency for Technology and Standards (KATS), cover plate
GM Europe, cover plate
RU-GOST R, cover plate
- GOST 4596-1975 Crucible graphite. Specifications
- GOST 6659-1983 Waterproof upholstery covering board. Specifications
- GOST 9556-1983 Woodworking equipment. Band flat grinding machines, basic parameters
- GOST 28042-1989 Reinforced concrete roofings for enterprises buildings. Specifications
- GOST 8960-1975 Ductile iron fittings with parallel thread for pipelines. Threaded bushings. Basic dimensions
- GOST 14824-1969 Go plain plug gauges of not full-form with laps of diameter over 160 to 300 mm. Design and dimensions
Professional Standard - Chemical Industry, cover plate
International Organization for Standardization (ISO), cover plate
- ISO 2184-1:1972 Industrial castors; Dimensions of top plates; Part I : Oblong top-plates with 4 bolt holes
- ISO 583:1975 Conveyor belts — Tolerances on total thickness and thickness of covers
- ISO 583:2023 Conveyor belts with a textile carcass — Total belt thickness and thickness of constitutive elements — Test methods
- ISO 7368:1989 Hydraulic fluid power; two-port slip-in cartridge valves; cavities
- ISO 7368:2016 Hydraulic fluid power - Two-port slip-in cartridge valves - Cavities
- ISO 16905:2015 Resilient floor coverings - Specification for rubber floor covering - Tile/Plank
- ISO 3101:1981 Wheels and castors; Triangular top plates with three fixing holes
- ISO 10575:2012 Resilient floor coverings - Specification for rubber sheet floor coverings with backing
- ISO 10581:2011 Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specification
CZ-CSN, cover plate
Standard Association of Australia （SAA）, cover plate
- AS/NZS 1577:2018 Scaffold decking components
- AS 4256.4:2006 Plastic roof and wall cladding materials - Unplasticized polyvinyl chloride (uPVC) wall cladding boards
Group Standards of the People's Republic of China, cover plate
工业和信息化部, cover plate
- SJ/T 11641-2016 Cover plate for printed board drilling
- HG/T 5857-2021 Transparent cured film for optical functional film cover
- JBT13697-2019 Insert-type metal explosion-proof cover assembly for power capacitors
- JB/T 13697-2019 Insert-type metal explosion-proof cover assembly for power capacitors
- JB/T 13965-2020 Technical conditions for sintered cover plate and stator of electronic vacuum pump for vehicle braking system
European Committee for Standardization (CEN), cover plate
- EN 501:1994 Roofing products from metal sheet - Specification for fully supported roofing products of zinc sheet
- EN ISO 10581:2020 Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2019)
- EN ISO 10581:2013 Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications
- PD CEN/TS 15398:2008 Resilient, textile and laminate floor coverings - Floor covering standard symbols
- PD CEN/TS 15398:2016 Resilient@ textile and laminate floor coverings - Floor covering standard symbols - Complementary element
- EN 17104:2021 Thermoplastics rigid protective wallcovering panels for internal use in buildings - Performance characteristics
- EN 16776:2016 Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification
- EN 13228:2011 Wood flooring - Solid wood overlay flooring elements including blocks with an interlocking system
BR-ABNT, cover plate
FI-SFS, cover plate
ES-AENOR, cover plate
Professional Standard - Electron, cover plate
Professional Standard - Non-ferrous Metal, cover plate
Professional Standard - Aerospace, cover plate
American Society for Testing and Materials (ASTM), cover plate
- ASTM C1280-07 Standard Specification for Application of Gypsum Sheathing
- ASTM D6662-01 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
- ASTM D6662-09 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
- ASTM D6662-13 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
- ASTM C1225-04e1 Standard Specification for Non-Asbestos Fiber-Cement Roofing Shingles, Shakes, and Slates
- ASTM C1225-08 Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
- ASTM C1225-08(2016) Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
- ASTM C1225-08(2012) Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
- ASTM C981-95 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
- ASTM C981-01 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
- ASTM C981-05 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
- ASTM C981-05(2013) Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
- ASTM C1225-04 Standard Specification for Non-Asbestos Fiber-Cement Roofing Shingles, Shakes, and Slates
PL-PKN, cover plate
- PN W88011-1958
- PN P63000-1960 Textile machinery. Working wid?hs of fiat cardi
- PN-EN 50520-2021-07 E Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
- PN-EN 17104-2021-06 E Thermoplastics rigid protective wallcovering panels for internal use in buildings - Performance characteristics
Defense Logistics Agency, cover plate
IN-BIS, cover plate
PT-IPQ, cover plate
- E 313-1976
- NP EN 1817-1999 Resilient floor coverings Specification for homogeneous and heterogeneous smooth rubber floor coverings
NO-SN, cover plate
国家市场监督管理总局、中国国家标准化管理委员会, cover plate
- GB/T 36259-2018 High aluminum silicate cover glass for touch panel
- GB/T 2877.2-2021 Hydraulic two-port slip-in cartridge valves—Part 2: Mounting dimensions
- GB/T 37240-2018 Test and evaluation methods for light transmission property of cover glass for crystalline silicon photovoltaic module
Professional Standard - Machinery, cover plate
- JB/T 6059.5-1992 Forging die for mechanical press machines Cover plates of guide bushings
- JB/T 8746.5-1998 Components of plastics profile extrusion tooling.Cover plate
- JB/T 6059.4-2015 Mechanical press forging dies.Components.Part 4: Cover plates for guide bushes
机械工业部, cover plate
BELST, cover plate
- STB 1767-2007 Boards of coverings of a floor wooden. Specifications
- STB 1383-2003 Reinforced concrete floor and cover slabs for buildings and constructions. Specifications
British Standards Institution (BSI), cover plate
- BS 5642-2:1983+A1:2014 Sills,copings and cappings.Part 2:Specification for copings and cappings of precast concrete, cast stone, clayware, slate and natural stone
- BS 5642-2:1983 Sills and copings - Specification for copings of precast concrete, cast stone, clayware, slate and natural stone
- BS 2484:1985 Specification for straight concrete and clayware cable covers
- BS ISO 7368:2016 Hydraulic fluid power. Two-port slip-in cartridge valves. Cavities
- DD CEN/TS 15398:2008 Resilient, textile and laminate floor coverings. Floor covering standard symbols
- DD CEN/TS 15398:2006 Resilient, textile and laminate floor coverings. Floor covering standard symbols
- BS ISO 10575:2012 Resilient floor coverings. Specification for rubber sheet floor coverings with backing
- BS EN 50520:2009 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
- BS EN ISO 10581:2013 Resilient floor coverings. Homogeneous poly(vinyl chloride) floor covering. Specifications
- BS EN ISO 10581:2020 Tracked Changes. Resilient floor coverings. Homogeneous poly(vinyl chloride) floor covering. Specifications
- BS DD CEN/TS 15398:2008 Resilient, textile
and laminate floor
coverings — Floor
covering standard
symbols
- 15/30331067 DC BS EN 50520. Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
- BS ISO 10577:2012 Resilient floor coverings. Specification for rubber sheet floor coverings without back
- BS EN 16776:2016 Resilient floor coverings. Heterogeneous polyurethane floor coverings. Specification
- BS EN 15114:2006 Textile floor coverings - Classification of textile floor coverings without pile
- BS EN 15114+A1:2006 Textile floor coverings. Classification of textile floor coverings without pile
American National Standards Institute （ANSI), cover plate
Underwriters Laboratories (UL), cover plate
- UL 514D-2000 Cover plates for flush-mounted wiring devices
- UL 514D-2013 UL Standard for Safety Cover Plates for Flush-Mounted Wiring Devices (Second Edition; Reprint with revisions through and including March 4@ 2016)
- UL 514D BULLETIN-2005 UL Standard for Safety Cover Plates for Flush-Mounted Wiring Devices
- UL 514D BULLETIN-2003 UL Standard for Safety Cover Plates for Flush-Mounted Wiring Devices
- UL 514D BULLETIN-2002 UL Standard for Safety Cover Plates for Flush-Mounted Wiring Devices
- UL 514D BULLETIN-2001 UL Standard for Safety Cover Plates for Flush-Mounted Wiring Devices
- UL 514D BULLETIN-2006 UL Standard for Safety Cover Plates for Flush-Mounted Wiring Devices
- UL 514D CRD-2010 UL Standard for Safety Cover Plates for Flush-Mounted Wiring Devices - Section / Paragraph Reference: New 6.1.2A Subject: Base plates@ covers and adapters intended to be shipped seperatly (Edition 1: April 14@ 2000)
- UL 514D CRD-2011 UL Standard for Safety Cover Plates for Flush-Mounted Wiring Devices - Section / Paragraph Reference: New 6.1.2A Subject: Base plates@ covers and adapters intended to be shipped seperatly (Edition 1: April 14@ 2000)
Professional Standard - Building Materials, cover plate
Canadian Standards Association (CSA), cover plate
NEMA - National Electrical Manufacturers Association, cover plate
- NEMA OS 1-1984 SHEET-STEEL OUTLET BOXES@ DEVICE BOXES@ COVERS@ AND BOX SUPPORTS
- NEMA OS 1-2008 Sheet-Steel Outlet Boxes@ Device Boxes@ Covers@ and Box Supports (Incorporates Amendment 2010)
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, cover plate
- GB/T 7934-2017 Hydraulic two-port slip-in cartridge valves—Technical requirements
Professional Standard - Coal, cover plate
- MT/T 375.4-1994 Magnesium oxychloride concrete products intended to be used in mines Backboard, trench cover and coal seam. Technical specification
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, cover plate
- GB/T 2877-2007 Hydraulic fluid power.Two-port slip-in cartridge valves.Cavities
Professional Standard - Railway, cover plate
- TB/T 3307.5-2014 Technical specification for manufacturing of high speed turnouts.Part 5: Cover plates
American Society of Mechanical Engineers (ASME), cover plate
Danish Standards Foundation, cover plate
- DS/EN 1470:2008 Textile floor coverings - Classification of needled floor coverings except for needled pile floor coverings
- DS/CEN/TS 15398:2008 Resilient, textile and laminate floor coverings - Floor covering standard symbols
- DS/EN 50520:2009 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
- DS/EN 50520:2021 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
- DS/EN 13297/AC:2009 Textile floor coverings - Classification of needled pile floor coverings
- DS/EN 13297:2007 Textile floor coverings - Classification of needled pile floor coverings
- DS/EN 15114+A1:2009 Textile floor coverings - Classification of textile floor coverings without pile
- DS/EN ISO 10582:2012 Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor coverings - Specification
Lithuanian Standards Office , cover plate
- LST EN 1470-2008 Textile floor coverings - Classification of needled floor coverings except for needled pile floor coverings
- LST EN 50520-2009 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
- LST EN 50520-2020 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
- LST EN 13297-2008 Textile floor coverings - Classification of needled pile floor coverings
- LST EN 13297-2008/AC-2008 Textile floor coverings - Classification of needled pile floor coverings
- LST EN 17104-2021 Thermoplastics rigid protective wallcovering panels for internal use in buildings - Performance characteristics
- LST EN 15114-2007+A1-2009 Textile floor coverings - Classification of textile floor coverings without pile
CH-SNV, cover plate
- SN 199 002-1979 Technical product documentation — Changes Documentation technique de produits — Modifications
- SN EN 17104-2021 Thermoplastics rigid protective wallcovering panels for internal use in buildings - Performance characteristics
GOSTR, cover plate
- GOST R 58386-2019 Protected strands in a cover for prestressed concrete structures. Specifications
CEN - European Committee for Standardization, cover plate
- PD CEN/TS 15398:2006 Resilient@ textile and laminate floor coverings - Floor covering standard symbols
- PREN 17104-2017 Thermoplastics rigid protective wallcovering panels for internal use in buildings - Performance characteristics
- EN 15114:2006/PRA2:2011 Classification of flat@ woven@ knitted or needled textile floor coverings without pile
Hunan Provincial Standard of the People's Republic of China, cover plate
- DB43/T 1770-2020 Energy Consumption Quota and Calculation Method for Unit Product of Video Cover Glass
CENELEC - European Committee for Electrotechnical Standardization, cover plate
- PREN 50520-2015 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
ES-UNE, cover plate
- UNE-EN 50520:2021 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
- UNE-EN 50520:2021/A1:2022 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
- UNE-EN 16776:2016 Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification
- UNE-EN ISO 10582:2018 Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10582:2017)
- UNE-EN ISO 10581:2020 Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2019)
GM Global, cover plate
- GMW 14276-2012 Closure Panel Release Handle Release Force Measurement Issue 3; English
ZA-SANS, cover plate
- SANS 1882:2003 Polymer concrete surface boxes, manhole and inspection covers, gully gratings and frames
AT-ON, cover plate
- ONORM B 5207-1973 Organic floor coverings; Determination of dimensional accuracy of plates (tiles)
- ONORM E 2960 Teil.1-1990 Lightning protection equipment; clamps and fixing material; general, coverplates supports, roof bushings, inspection boxes
- ONORM E 6530-1993 Cable cover plates of PVC-U or PE-HD-Dimensions, technical terms of delivery, tests and marking of conformity
- OENORM EN 17104-2021 Thermoplastics rigid protective wallcovering panels for internal use in buildings - Performance characteristics
European Committee for Electrotechnical Standardization（CENELEC）, cover plate
- EN 50520:2009 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations
The American Road & Transportation Builders Association, cover plate
SAE - SAE International, cover plate
- SAE J1114-1989 Fuel Tank Filler Cap and Cap Retainer Threaded@ Recommended Practice
- SAE J1114-2005 Fuel Tank Filler Cap and Cap Retainer Threaded
- SAE J1114-2019 Fuel Tank Filler Cap and Cap Retainer Threaded
- SAE J1114-1977 Fuel Tank Filler Cap and Cap Retainer-Threaded Pressure-Vacuum Type
AT-OVE/ON, cover plate
- OVE EN 50520-2021 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations (german version)
IT-UNI, cover plate
- UNI EN 17104-2021 Thermoplastics rigid protective wallcovering panels for internal use in buildings - Performance characteristics
未注明发布机构, cover plate
KR-KS, cover plate
- KS K ISO 10581-2018 Resilient floor coverings — Homogenous poly(vinyl chloride) floor covering — Specification
- KS K ISO 10581-2022 Resilient floor coverings — Homogeneous poly(vinyl chloride) floor covering — Specification