ZH
RU
ES

safe current density

safe current density, Total:495 items.

In the international standard classification, safe current density involves: Protection against electric shock, Lamps and related equipment, Electrical accessories, Electricity. Magnetism. Electrical and magnetic measurements, Information technology (IT) in general, Electromagnetic compatibility (EMC), General methods of tests and analysis for food products, Telecommunications in general, Electromechanical components for electronic and telecommunications equipment, Rectifiers. Convertors. Stabilized power supply, Occupational safety. Industrial hygiene, Agricultural machines, implements and equipment, Electric traction equipment, Railway rolling stock, Analytical chemistry, Measurement of fluid flow, Telecommunication terminal equipment, Installations in buildings, Industrial automation systems, Alarm and warning systems, Air quality, Aerospace electric equipment and systems, Nuclear energy engineering, Linear and angular measurements, Mobile services, Internal combustion engines, Rotating machinery, Geology. Meteorology. Hydrology, Radiation measurements, Conducting materials, Iron and steel products, Radiocommunications, Burners. Boilers, Body care equipment, Radiation protection, Applications of information technology, Farm buildings, structures and installations, Integrated Services Digital Network (ISDN), Domestic safety, Electrical wires and cables, Safety of machinery, Electrical engineering in general, Solar energy engineering, Kitchen equipment, Galvanic cells and batteries, Capacitors, Character sets and information coding, Audio, video and audiovisual engineering, Telecontrol. Telemetering, Insulation, Power transmission and distribution networks, Protection against fire, Hand-held tools, Domestic electrical appliances in general, Domestic, commercial and industrial heating appliances, Medical equipment, Semiconductor devices, Electric road vehicles, Electrical equipment for working in special conditions, Tea. Coffee. Cocoa.

Defense Logistics Agency, safe current density

DLA MIL-PRF-83536/32 A-2005 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 3PDT, 25 AMPERES (RESISTIVE), PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, DC COIL
DLA MIL-PRF-83536/20 A VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, 4PDT, Low Level to 10 Amperes, Magnetic Latch, Hermetically Sealed, All Welded, AC Coils
DLA MIL-PRF-83536/18 B-2010 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 10 AMPERES, MAGNETIC LATCH, HERMETICALLY SEALED, ALL WELDED, DC COILS
DLA MIL-PRF-83536/18 C-2012 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 10 AMPERES, MAGNETIC LATCH, HERMETICALLY SEALED, ALL WELDED, DC COILS
DLA MIL-PRF-83536/21 A VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, 3PDT, Low Level to 10 Amperes, Permanent Magnetic Drive, Hermetically Sealed, All Welded, DC Coil
DLA MS27751 REV J-2003 RELAYS, ELECTROMAGNETIC, 50 AMPERES, DC/60 AMPERES AC, 3 PST OR 3 PDT, HERMETICALLY SEALED, PERMANENT MAGNET DRIVE
DLA MIL-PRF-83536/12 A-2002 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 10 AMPERES, MAGNETIC LATCH, HERMETICALLY SEALED, ALL WELDED, DC COILS
DLA MIL-PRF-83536/12 B-2011 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 10 AMPERES, MAGNETIC LATCH, HERMETICALLY SEALED, ALL WELDED, DC COILS
DLA MIL-PRF-83536/19 B-2013 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 10 AMPERES, MAGNETIC LATCH, HERMETICALLY SEALED, ALL WELDED, TRANSIENT SUPPRESSED DC COILS
DLA MIL-PRF-83536/12 A VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 10 Amperes, Magnetic Latch, Hermetically Sealed, All Welded, DC Coils
DLA MIL-PRF-83536/23 A VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, 3PDT, Low Level to 10 Amperes, Permanent Magnetic Drive, Magnetic Latch, Hermetically Sealed, All Welded, DC Coil
DLA MIL-PRF-83536/1 A VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 5 Amperes, Permanent Magnetic Drive, Hermetically Sealed, All Welded, DC Coils
DLA MIL-PRF-83536/3 B-2008 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 5 AMPERES, PERMANENT MAGNET DRIVE, MAGNETIC LATCH, HERMETICALLY SEALED, ALL WELDED, DC COILS
DLA MIL-PRF-83536/5 B-2008 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 5 AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, DC COILS
DLA MIL-PRF-83536/5 C-2010 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 5 AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, DC COILS
DLA MIL-PRF-83536/8 A VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, 4PDT, Low Level to 5 Amperes, Permanent Magnetic Drive, Magnetic Latch, Hermetically Sealed, All Welded, Transient Suppressed DC Coils
DLA MIL-PRF-83536/7 B-2013 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 5 AMPERES, PERMANENT MAGNET DRIVE, MAGNETIC LATCH, HERMETICALLY SEALED, ALL WELDED, DC COILS
DLA MIL-PRF-83536/33 B-2010 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 3PDT, 25 AMPERES (RESISTIVE), PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, TRANSIENT SUPPRESSED DC COIL
DLA MIL-PRF-83536/37 VALID NOTICE 1-2010 Relay, Electromagnetic, Established Reliability, 1PDT, 25 Amperes, Permanent Magnet Drive, Hermetically Sealed, All Welded, Transient Suppressed DC Coils
DLA MIL-PRF-83536/6 C-2008 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 5 AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, TRANSIENT SUPPRESSED DC COILS
DLA MIL-PRF-83536/9 B-2008 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 10 AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, DC COILS
DLA MIL-PRF-83536/9 C-2009 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 10 AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, DC COILS
DLA MIL-PRF-83536/1 B-2011 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 5 AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, DC COILS
DLA MIL-PRF-83536/35 A-2012 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 1PDT, LOW LEVEL TO 10 AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED ALL WELDED, TRANSIENT SUPPRESSED DC COIL
DLA MIL-PRF-83536/11 C-2013 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 10 AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, AC COILS
DLA MS27742 REV E-2003 RELAYS, ELECTROMAGNETIC, TYPE I, MAGNETIC LATCH, 25 AMPERES, 3 PDT, ALL WELDED, HERMETICALLY SEALED
DLA MIL-PRF-83536/16 C-2009 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 4PDT, LOW LEVEL TO 10 AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, TRANSIENT SUPPRESSED DC COIL
DLA MIL-PRF-83536/22 C-2010 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 3PDT, LOW LEVEL TO 10 AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, TRANSIENT SUPPRESSED DC COILS
DLA MIL-PRF-83536/35 VALID NOTICE 2-2010 Relays, Electromagnetic, Established Reliability, 1PDT, Low Level to 10 Amperes, Permanent Magnet Drive, Hermetically Sealed All Welded, Transient Suppressed DC Coil
DLA MIL-PRF-83536/10 C-2009 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 10 AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED, ALL WELDED, TRANSIENT SUPPRESSED DC COILS
DLA MIL-PRF-83536/2 B VALID NOTICE 1-2010 Relays, Electromagnetic, Established Reliability, DPDT, Low Level to 5 Amperes, Permanent Magnet Drive, Hermetically Sealed, All Welded, Transient Suppressed DC Coils
DLA MIL-PRF-83536/4 B-2009 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, DPDT, LOW LEVEL TO 5 AMPERES, PERMANENT MAGNET DRIVE, MAGNETIC LATCH, HERMETICALLY SEALED, ALL WELDED, TRANSIENT SUPPRESSED DC COILS
DLA DSCC-DWG-85006 REV D REINST NOTICE-2002 RELAY, SOLID STATE, HERMETICALLY SEALED, OPTICALLY ISOLATED, 1.0 AMPERE, 60 V DC, SPST (N.O.), CMOS INPUT
DLA DESC-DWG-85006 REV B-1993 RELAY, SOLID STATE, HERMETICALLY SEALED, OPTICALLY ISOLATED, 1.0 AMPERE, 60 V DC, SPST (N.O.), CMOS INPUT
DLA DSCC-DWG-85006 REV E-2008 RELAY, SOLID STATE, HERMETICALLY SEALED, OPTICALLY ISOLATED, 1.0 AMPERE, 60 V DC, SPST (N.0.), CMOS INPUT

PL-PKN, safe current density

PN BN 6094-04-1966
PN T04900-1972 Microv/ave devices Measuring meihods o? ?lux densi?y microwaye power for sa?efy opplica?ions
PN T05001-1991 Telecommunication network in mines. Cable lines. Measuring methods using variable current and intrinsically safe devices

RU-GOST R, safe current density

GOST 12.1.038-1982 Occupational safety standards system. Electric safety. Maximum permissible levels of pick-up voltages and currents
GOST R IEC 924-1998 D.c. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
GOST IEC 60924-2012 D.C. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
GOST 12.2.002.6-1991 Occupational safety standards system. Agricultural tractors and vehicles. A method of determing the cab insulation
GOST 12.2.007.6-1975 Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v
GOST 30331.5-1995 Electrical installations of buildings. Part 4. Protection for safety. Protection against overcurrent
GOST R IEC 61508-5-2007 Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 5. Guidelines for methods of the determination of safety integrity levels
GOST R IEC 61508-5-2012 Functional safety of electrical, electronic, programmable electronic safety-related systems. Part 5. Guidelines for methods of the determination of safety integrity levels
GOST IEC 61046-2012 Auxiliaries for lamps. D.c. or a.c. supplied electronic step-down converters for filament lamps. General and safety requirements
GOST R 53310-2009 Through penetration for cables, hermetic inputs and through penetration of electric current types. Requirements of fire safety. Fire resistance test methods
GOST 8.105-1980 State system for ensuring the uniformity of measurements. State special standard and all-union verification schedule for means measuring neutron flux density and fluence at nuclear installations
GOST R 50571.5-1994 Electrical installations of buildings. Part 4. Protection for safety. Protection against overcurrent
GOST 30331.9-1995 Electrical installations of buildings. Part 4. Protection for safety. Measures of protection against overcurrent
GOST R IEC 928-1998 Auxiliaries for lamps. A.c.-supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
GOST R 50571.9-1994 Electrical installations of buildings. Part 4. Protection for safety. Measures of protection against overcurrent
GOST 27570.38-1992 Safety of household and similar electrical appliances. Particular requirements for commercial electric forced convection ovens
GOST R ISO 8528-12-2005 Reciprocating internal combustion engine driven alternating current generating sets. Part 12. Emergency power supply to safety services
GOST R IEC 61034-2-2005 Measurement of smoke density of cables burning under defined conditions. Part 2. Test procedure and requirements
GOST R 34.10-2001 Information technology. Cryptographic data security. Formation and verification processes of [electronic] digital signature
GOST R 34.10-2012 Information technology. Cryptographic data security. Signature and verification processes of [electronic] digital signature
GOST R 34.10-1994 Information technology. Cryptographic data security. Produce and check procedures of electronic digital signature based on asymmetric cryptographic algorithm
GOST ISO 8528-12-2011 Reciprocating internal combustion engine driven alternating current generating sets. Part 12. Emergency power supply to safety services
GOST 34.310-1995 Information technology. Cryptographic. Data security. Produce and theck procedures of Electronic digital Signature based on Asymmetric Cryptographic algorithm
GOST R 51367-1999 Safety of household and similar electrical appliances. Particular requirements for commecial electric forced convection ovens, steam cookers and steam-convection ovens

Underwriters Laboratories (UL), safe current density

UL 1029 BULLETIN-2006 UL Standard for Safety High-Intensity-Discharge Lamp Ballasts
UL 101 BULLETIN-2006 UL Standard for Safety Leakage Current for Appliances
UL 943B BULLETIN-2005 UL Standard for Safety Appliance Leakage-Current Interrupters
UL 943B-2017 UL Standard for Safety Appliance Leakage-Current Interrupters (Third Edition)
UL 486D BULLETIN-2005 UL Standard for Safety Sealed Wire Connector Systems
UL 2367 BULLETIN-2018 UL Standard for Safety Solid State Overcurrent Protectors
UL 984 BULLETIN-2001 UL Standard for Safety Hermetic Refrigerant Motor-Compressors
UL 984 BULLETIN-2005 UL Standard for Safety Hermetic Refrigerant Motor-Compressors
UL 984 BULLETIN-2003 UL Standard for Safety Hermetic Refrigerant Motor-Compressors
UL 844 BULLETINS-2006 Standard for Safety for Electric Lighting Fixtures for Use in Hazardous (Classified) Locations
UL 1029 BULLETINS-2000 UL Standard for Safety High-Intensity-Discharge Lamp Ballasts (05/19/2000 (3p); 01/21/2000 (4p))
UL 1066 BULLETIN-2009 UL Standard for Safety Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures
UL 1066 BULLETIN-2014 UL Standard for Safety Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures
UL 1066 BULLETIN-2018 UL Standard for Safety Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures
UL 1066 BULLETINS-2001 UL Standard for Safety Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures
UL 486D-2015 UL Standard for Safety Sealed Wire Connector Systems (Sixth Edition)
UL 1029 BULLETIN-2011 UL Standard for Safety High-Intensity-Discharge Lamp Ballasts (COMMENTS DUE: February 21@ 2011)
UL 1029 BULLETIN-2008 UL Standard for Safety High-Intensity-Discharge Lamp Ballasts (COMMENTS DUE: December 01@ 2008)
UL 1029 BULLETIN-2007 UL Standard for Safety High-Intensity-Discharge Lamp Ballasts (COMMENTS DUE: NOVEMBER 26@ 2007)
UL 1029 BULLETIN-2009 UL Standard for Safety High-Intensity-Discharge Lamp Ballasts (COMMENTS DUE: February 15@ 2009)
UL 1029 BULLETIN-2017 UL Standard for Safety High-Intensity - Discharge Lamp Ballast (COMMENTS DUE: May 1@ 2017)
UL 1029 BULLETIN-2012 UL Standard for Safety High-Intensity-Discharge Lamp Ballasts (COMMENTS DUE: July 16@ 2012)
UL 943B-2001 UL Standard for Safety Appliance Leakage-Current Interrupters (First Edition; Reprint with Revisions Through and Including February 10@ 2010)
UL 101-2017 UL Standard for Safety Leakage Current for Appliances (Sixth Edition; Reprint with revisions through and including October 2@ 2018)
UL 910-1998 UL Standard for Safety Test for Flame-Propagation and Smoke-Density Values for Electrical and Optical-Fiber Cables Used in Spaces Transporting Environmental Air (Fifth Edition)
UL 1666 BULLETIN-2002 UL Standard for Safety Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts
UL 122701 BULLETIN-2016 UL Standard for Safety Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids (COMMENTS DUE: OCTOBER 17@ 2016)
UL 122701 BULLETIN-2017 UL Standard for Safety Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids (COMMENTS DUE: MARCH 6@ 2017)
UL 122701-2011 UL Standard for Safety Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids (Second Edition; Reprint with revisions through and including June 6@ 2016)
UL 62133 BULLETIN-2015 UL Standard for Safety Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes – Safety Requirements for Portable Sealed Secondary Cells@ and for Batteries Made From Them@ for Use in Portable Applications
UL 62133-2015 UL Standard for Safety Secondary Cells And Batteries Containing Alkaline Or Other Non-Acid Electrolytes - Safety Requirements For Portable Sealed Secondary Cells, And For Batteries Made From Them, For Use In Portable Applications (First Edition)
UL 62133-1-2020 UL Standard for Safety Secondary Cells And Batteries Containing Alkaline Or Other Non-Acid Electrolytes - Safety Requirements For Portable Sealed Secondary Cells, And For Batteries Made From Them, For Use In Portable Applications (First Edition)
UL 1666-1997 UL Standard for Safety Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts (Third Edition)
UL 1666-2007 UL Standard for Safety Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts (Fifth Edition)
UL 1066 BULLETIN-2012 UL Standard for Safety Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures (COMMENTS DUE: MARCH 19@ 2012)
UL 1066 BULLETIN-2016 UL Standard for Safety Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures (COMMENTS DUE: FEBRUARY 22@ 2016)
UL 1066 BULLETIN-2011 UL Standard for Safety Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures (COMMENTS DUE: August 26@ 2011)
UL 1066 BULLETIN-2015 UL Standard for Safety Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures (COMMENTS DUE: November 23@ 2015)
UL 1066 BULLETIN-2007 UL Standard for Safety Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures (COMMENTS DUE: November 30@ 2007)
UL 1066 BULLETIN-2017 UL Standard for Safety Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures (COMMENTS DUE: February 20@ 2017)
UL 1066 BULLETIN-2013 UL Standard for Safety Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures (COMMENTS DUE: April 29@ 2013)
UL 62133-2 BULLETIN-2019 UL Standard for Safety Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes – Safety Requirements for Portable Sealed Secondary Cells@ and for Batteries Made from Them@ for Use in Portable Applications – Part 2: Lithium Systems
UL 486D BULLETIN-2014 UL Standard for Safety Sealed Wire Connector Systems (COMMENTS DUE: JUNE 23@ 2014)
UL 486D BULLETIN-2015 UL Standard for Safety Sealed Wire Connector Systems (COMMENTS DUE: MARCH 9@ 2015)

American National Standards Institute （ANSI), safe current density

ANSI/UL 1029-2012 Standard for Safety for High-Intensity-Discharge Lamp Ballasts
ANSI/UL 2367-2009 Standard for Safety for Solid State Overcurrent Protectors
ANSI/ANS 53.1-2011 Nuclear Safety Design Process for Modular Helium-Cooled Reactor Plants
ANSI/UL 651Aa-2011 Standard for Safety for Type EB and A Rigid PVC Conduit and HDPE Conduit
ANSI/UL 1416-2012 Standard for Safety for Overcurrent and Overtemperature Protectors for Radio- and Television-Type Appliances
ANSI/TIA/EIA 102AACA-1-2002 Project 25 - Digital Radio Over the Air Rekeying (OTAR) Protocol - Addendum 1 - Key Management Security Requirements for Type 3 Block Encryption Algorithms
ANSI N43.3-2008 General Radiation Safety - Installations Using Non-Medical X-Ray and Sealed Gamma-Ray Sources, Energies Up to 10 MeV
ANSI/ISA 12.16.01*IEC 60079-7:2002 Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection - Increased Safety "e"
ANSI/INCITS/ISO/IEC 9797-1:1999 Information Technology - Security techniques - Message Authentication Codes (MACs) - Part 1: Mechanisms using a block cipher
ANSI/ASTM E1869:2005 Guide for Confidentiality, Privacy, Access, and Data Security Principles for Health Information Including Electronic Health Records
ANSI/UL 651A-2011 Standard for Safety for Type EB and A Rigid PVC Conduit and HDPE Conduit
ANSI/UL 1666-2012 Standard for Safety for Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts

Taiwan Provincial Standard of the People's Republic of China, safe current density

CNS 9831-1988 Surrounding Temperature Affect for Security Current of Wires Insulation

British Standards Institution (BSI), safe current density

BS EN 60990:2000 Methods of measurement of touch current and protective conductor current
BS EN 61204-7:2006 Low-voltage power supplies, d.c. output - Safety requirements
BS ISO 10790:2015 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
BS ISO 16531:2020 Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
BS ISO 10790:1999 Measurement of fluid flow in closed conduits. Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
BS EN IEC 62932-2-2:2020 Flow battery energy systems for stationary applications - Safety requirements
19/30399949 DC BS ISO 16531. Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
BS EN 61046:1995 Specification for d.c. or a.c. supplied electronic step-down convertors for filament lamps. General and safety requirements
BS IEC 60755-1:2022 General safety requirements for residual current operated protected devices - Residual current operated protective devices for DC systems
15/30334794 DC BS EN 60755. General Safety Requirements for Residual Current Operated Protective Devices. Group Safety Publication
BS EN ISO 8528-13:2016 Reciprocating internal combustion engine driven alternating current generating sets. Safety
BS EN 60335-2-60:2003+A12:2010 Household and similar electrical appliances - Safety - Particular requirements for whirlpool baths and whirlpool spas
BS ISO 16531:2013 Surface chemical analysis. Depth profiling. Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
BS EN 60335-2-60:2003 Specification for safety of household and similar electrical appliances - Particular requirements for whirlpool baths and whirlpool spas
PD IEC TR 62351-90-2:2018 Power systems management and associated information exchange. Data and communications security. Deep packet inspection of encrypted communications
21/30421479 DC BS IEC 63322. Security of Medical Electrical Equipment Containing High-Activity Sealed Radioactive Sources
BS 7698-12:1998 Reciprocating internal combustion engine driven alternating current generating sets - Emergency power supply to safety devices
BS EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d c. Equipment for testing, measuring or monitoring of protective measures. Equipment for testing the safety of electrical equipment of machinery
BS ISO 9213:2004 Measurement of total discharge in open channels. Electromagnetic method using a full-channel-width coil
BS EN 60204-11:2000 Safety of machinery - Electrical equipment of machines - Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV
BS EN 60204-11:2001 Safety of machinery. Electrical equipment of machines. Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV
BS EN 62109-2:2011 Safety of power converters for use in photovoltaic power systems. Particular requirements for inverters
BS EN 61204:1995 Low-voltage power supply devices, d.c. output - Performance characteristics and safety requirements
BS EN 62226-1:2005 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - General
BS EN 62560:2012+A11:2019 Self-ballasted LED-lamps for general lighting services by voltage > 50 V. Safety specifications
21/30437438 DC BS EN IEC 61557-14. Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures. Part 14. Equipment for testing the safety of electrical equipment for ma...
BS EN 60252-1:2001 A.C. motor capacitors - General - Performance, testing and rating - Safety requirements - Guide for installation and operation
BS EN 60671:2011 Nuclear power plants. Instrumentation and control systems important to safety. Surveillance testing
BS EN 61788-17:2013 Superconductivity. Electronic characteristic measurements. Local critical current density and its distribution in large-area superconducting films
23/30475449 DC BS EN IEC 63322. Security of Medical Electrical Equipment Containing High-Activity Sealed Radioactive Sources
BS EN 62351-9:2017 Power systems management and associated information exchange - Data and communications security. - Part 9: Cyber security key management for power system equipment
BS EN 50502:2015 Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems
12/30247714 DC BS IEC 62128-2. Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Part 2. Provisions against the effects of stray currents caused by d.c. traction systems
20/30430760 DC BS EN 50122-2. Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Part 2. Provisions against the effects of stray currents caused by DC traction systems
BS EN 60335-2-42:2003+A11:2012 Household and similar electrical appliances. Safety. Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
BS EN 60335-2-42+A1:2003 Household and similar electrical appliances. Safety. Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
BS EN 61029-2-3:2011 Safety of transportable motor-operated electric tools. Particular requirements for planers and thicknessers
19/30396999 DC BS EN IEC 60755-2. General safety requirements for residual current operated protective devices. Part 2. Residual current operated protective devices for DC systems
21/30442610 DC BS EN IEC 60755-1. General safety requirements for residual current operated protective devices. Part 1. Residual current operated protective devices for DC systems
BS EN 50122-2:2010 Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Provisions against the effects of stray currents caused by d.c. traction systems
BS ISO 8528-12:2022 Tracked Changes. Reciprocating internal combustion engine driven alternating current generating sets. Emergency power supply to safety services
BS EN 61472:2013 Live working. Minimum approach distances for a.c systems in the voltage range 72,5 kV to 800 kV. A method of calculation
BS EN 61472:2005 Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation
BS EN 61472:2004 Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation
BS EN 50122-3:2010 Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Mutual interaction of a.c. and d.c. traction systems
12/30247717 DC BS IEC 62128-3. Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Part 3. Mutual Interaction of a.c. and d.c. traction systems
20/30430763 DC BS EN 50122-3. Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Part 3. Mutual Interaction of AC and DC traction systems
BS EN 62838:2016 LEDsi lamps for general lighting services with supply voltages not exceeding 50 V a.c. r.m.s. or 120 V ripple free d.c. Safety specifications
BS 5752-16:1996 Methods of test for coffee and coffee products. Green and roasted coffee. Determination of free-flow bulk density of whole beans (routine method)

Korean Agency for Technology and Standards (KATS), safe current density

KS C IEC 60990:2003 Method of measurement of touch current and protective conductor current
KS B ISO 10790-2003(2018) Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
KS B ISO 10790:2003 Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
KS C IEC 62477-1:2014 Safety requirements for power electronic converter systems and equipment — Part 1: General
KS C IEC 62477-1:2019 Safety requirements for power electronic converter systems and equipment — Part 1: General
KS A ISO 11933-5-2012(2017) Components for containment enclosures－Part 5：Penetrations for electrical and fluid circuits
KS C IEC 62397-2012(2022) Nuclear power plants－Instrumentation and control important to safety－Resistance temperature detectors
KS A ISO 11933-5-2012(2022) Components for containment enclosures－Part 5：Penetrations for electrical and fluid circuits
KS C 8547-2017 Redox flow battery for use in energy storage system — Performance and safety tests
KS C IEC 62397-2012(2017) Nuclear power plants－Instrumentation and control important to safety－Resistance temperature detectors
KS C IEC 60364-4-473:2002 Electrical installations of buildings-part4:Protection for safety Chapter 47 : Application of protective measures for safety Section473 : Measures of protection against overcurrent
KS C IEC 62351-9:2021 Power systems management and associated information exchange — data and communications security — Part 9: cyber security key management for power system equipment
KS X ISO 10202-3:2005 Financial transaction cards-Security architecture of financial transaction systems using integrated circuit cards-Part 3:Cryptographic key relationships
KS C IEC 62932-2-2:2021 Flow battery energy systems for stationary applications —Part 2-2: safety requirements
KS C 5959-1995 Financial transaction cards-Security architecture of financial transaction systems using Integrated Circuit Cards-Part 3:Cryptographic key relationships
KS C IEC 60335-2-60:2013 Household and similar electrical appliances－Safety－Part 2-60：Particular requirements for whirlpool baths and whirlpool spas
KS C IEC 60335-2-60:2007 Household and similar electrical appliances-Safety-Part 2-60:Particular requirements for whirlpool baths and whirlpool spas
KS C IEC 60252-1:2003 AC motor capacitors－Part 1：General－ Performance, testing and rating－Safety requirements－ Guide for installation and operation
KS C IEC 62226-1:2008 Exposure to electric or magnetic fields in the low and intermediate frequency range－Methods for calculating the current density and internal electric field induced in the human body－Part 1：General
KS C IEC 60204-11-2003(2018)
KS C IEC 62477-2:2019 Safety requirements for power electronic converter systems and equipment — Part 2: Power electronic converters from 1 000 V AC or 1 500 V DC up to 36 kV AC or 54 kV DC
KS C IEC 61472:2015 Live working — Minimum approach distances for A.C. systems in the voltage range 72.5 kV to 800 kV — A method of calculation
KS C IEC 61557-5-2013(2018) Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.－Equipment for testing, measuring or monitoring of protective measures－Part 5：Resistance to earth
KS C IEC 61557-2-2013(2018) Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.－Equipment for testing, measuring or monitoring of protective measures－Part 2：Insulation resistance
KS C IEC 61557-2:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.-Equipment for testing, measuring or monitoring of protective measures-Part 2:Insulation resistance
KS C IEC 61557-5:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.－Equipment for testing, measuring or monitoring of protective measures－Part 5：Resistance to earth
KS C IEC 60335-2-42:2013 Household and similar electrical appliances ― Safety ― Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
KS C IEC 60335-2-42:2006 Household and similar electrical appliances-Safety-Part 2-42:Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
KS C IEC 61557-7-2013(2018) Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c.－Equipment for testing, measuring or monitoring of protective measures－Part 7：Phase sequence
KS C IEC 62128-2:2021 Railway applications — Fixed installations — Electrical safety, earthing and the return circuit — Part 2: Provisions against the effects of stray currents caused by d.c. traction systems
KS C IEC 62133:2005 Secondary cells and batteries containing alkaline or other non-acid electrolytes-Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
KS C IEC 62133:2013 Secondary cells and batteries containing alkaline or other non-acid electrolytes-Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications

CZ-CSN, safe current density

CSN 66 8220-1969 Saíety test against the minimum currents
CSN EN 50 020-1992 Electrical apparatus for potentially explosive atmospheres. Intrinsic safety ?i"

SE-SIS, safe current density

SIS SS 428 06 05-1980 Safety switches for max 1000 V a.c
SIS SS-EN 60 924-1991 D.C. supplied electronic ballasts for tubular fluorescent lamps — General and safety requirements
SIS SS-EN 60 928-1991 A.C. supplied electronic ballasts for tubularfluorescent lamps - General and safety requirements
SIS SS 431 12 83-1987 Safety of ballasts for tubular discharge lamps - Particular requirements for tubular discharge lamps of non-preheated types supplied by high frequency voltage
SIS SS-EN 60 335-2-42-1992 Safety ofhousehold and similar electrical appliances - Part 2: Particular requirements for commercial electric forced convection ovens

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association, safe current density

JEDEC J-STD-020D.1-2008 Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices

国家市场监督管理总局、中国国家标准化管理委员会, safe current density

GB/T 37543-2019 Measurement method for total electric field strength and ion current density of DC transmission line and converter station
GB/T 39843-2021 Electronic characteristic measurements—Local critical current density and its distribution in large-area superconducting films
GB/T 28026.2-2018 Railway applications—Fixed installations—Electrical safety，earthing and the return circuit—Part 2：Provisions against the effects of stray currents caused by d.c. traction systems
GB/T 28026.3-2018 Railway applications—Fixed installations—Electrical safety, earthing and the return circuit—Part 3: Mutual interaction of a.c.and d.c.traction systems

National Health Commission of the People's Republic of China, safe current density

GB 5009.2-2016 Determination of Relative Density of Food in National Food Safety Standard

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, safe current density

GB 5413.33-2010 National food safety standard Determination of specific gravity in raw milk
GB 17478-1998 Low-voltage power supply devices,d.c.output-Performance characteristics and safety requirements
GB/T 20729-2006 Measurement of conductive liquid flow in closed conduits Flanged electromagnetic flowmeters Overall length
GB/T 25838-2010 Qualification of safety class resistance temperature detectors for nuclear power plants
GB 4706.73-2004 Household and similar electrical appliances-safety Particular requirements for whirlpool baths
GB 4706.73-2008 Household and similar electric appliances.Safety.Particular requirements for whirlpool baths and whirpool spas
GB 4706.34-2003 Safety of household and similar electrical appliances Particular requirements for commercial electric forced convection ovens,steam cookers and steam-convection ovens
GB 4706.34-2008 Household and similar electrical appliances.Safety.Particular requirements for commercial electric forced convection ovens,steam cookers and steam-convection ovens
GB 16836-1997 General requirements of safety design for measuring relays and protection equipment
GB 16836-2003 General requirements of safety design for measuring relays and protection equipment
GB 13960.4-1996 Safety of transportable motor-operated electric tools. Particular requirements for planers and thicknessers
GB/T 2820.12-2002 Reciprocating internal combustion engine driven alternating current generating sets--Part 12: Emergency power supply to safty services
GB 2820.12-2002 Reciprocating internal combustion engine driven alternating current generator sets - Part 12; Emergency supply of power to safety devices
GB 14045-1993 Ballasts for discharge lamps (excluding tubular fluorescent lamps) general and safety requirements
GB/T 18216.2-2002 Electrical safety in low voltage distribution systems up to 1000V a.c.and 1500 V d.c.--Equipment for testing,measuring or monitoring of protective measuring--Part 2: Insulation resistance
GB/T 18216.5-2007 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c.- Equipment for testing, measuring or monitoring of protective measures- Part 5: Resistance to earth
GB/T 18216.2-2012 Electrical safety in low voltage distribution systems up to 1000V a.c.and 1500V d.c..Equipent for testing,measuring or monitoring of protective measures.Part 2:Insulation resistance

Lithuanian Standards Office , safe current density

LST ETS 300 840 Leid.1-2006 Telecommunications security;Integrated Services Digital Network (ISDN);Confidentiality system for audiovisual services
LST EN 60924+A1-1999 D.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements (IEC 60924:1990)
LST EN 302 109 V1.1.1-2004 Terrestrial Trunked Radio (TETRA); Security; Synchronization mechanism for end-to-end encryption
LST ETS 300 841 Leid.1-2006 Telecommunications security;Integrated Services Digital Network (ISDN);Encryption key management and authentication system for audiovisual services
LST HD 384.4.473 S1-2002 Electrical installations of buildings -- Part 4: Protection for safety -- Chapter 47: Application of protective measures for safety - Section 473: Measures of protection against overcurrent
LST EN 50122-2-2011 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit -- Part 2: Provisions against the effects of stray currents caused by d.c. traction systems

ETSI - European Telecommunications Standards Institute, safe current density

PRETS 300 840-1997 Telecommunications Security; Integrated Services Digital Network (ISDN); Confidentiality System for Audiovisual Services
ETS 300 840-1998 Telecommunications Security; Integrated Services Digital Network (ISDN); Confidentiality System for Audiovisual Services
EG 200 234-2000 Telecommunications Security; a Guide to Specifying Requirements for Cryptographic Algorithms (V1.2.2)
EG 200 234-1999 Telecommunications Security; a Guide to Specifying Requirements for Cryptographic Algorithms (V1.2.1)

Professional Standard - Electron, safe current density

SJ 3274-1990 Safety requirements for single-phase A.C. power supply switches

Professional Standard - Machinery, safe current density

JB/T 9540-1999 Safety requirements for d.c. electric fans for use in vechicles and ships

国家机械工业局, safe current density

JB 9540-1999 Safety requirements for DC fans for vehicles and ships

AENOR, safe current density

UNE-EG 200234 V1.2.2:2001 Telecommunications Security. A guide to specifying requirements for cryptographic algorithms.
UNE-EN 62560:2013 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
UNE-EN 50122-2:2011 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit -- Part 2: Provisions against the effects of stray currents caused by d.c. traction systems

Standard Association of Australia （SAA）, safe current density

AS 1807.3:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test - Determination of air velocity in laminar flow cleanrooms
AS 1807.1:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of air velocity and uniformity of air velocity in clean workstations, laminar flow safety cabinets and pharmaceutical isolators
AS 1807.22:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of air barrier containment of laminar flow safety cabinets
AS 1807.26:2004 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test - Determination of air barrier containment of laminar flow safety cabinets - Potassium iodidediscus test
AS 1807.21:2000 Cleanrooms, workstations, safety cabinets and pharmaceutical isolators - Methods of test Determination of inward air velocity of Class I biological safety cabinets
AS 2805.14.2:2003 Electronic funds transfer - Requirements for interfaces - Secure cryptographic devices (retail) - Security compliance checklists for devices used in magnetic stripe card systems
AS/NZS 60928:2000 Auxiliaries for lamps - A.C. supplied electronic ballasts for tubular fluorescent lamps - General and safety requirements
AS IEC 62477.1:2016 Safety requirements for power electronic converter systems and equipment, Part 1: General
AS 2805.14.2:2009
AS 3778.3.8:2001 Measurement of water flow in open channels Part 3.8: Velocity-area method--Electromagnetic method using a full-channel-width coil

Japanese Industrial Standards Committee (JISC), safe current density

JIS E 5008:2009 Rolling stock -- Power convertors installed on board rolling stock
JIS C 60364-4-43:2006 Electrical installations of buildings -- Part 4-43: Protection for safety -- Protection against overcurrent
JIS C 8473:2009 Lighting busways -- Particular safety requirements for power supply use
JIS C 0364-4-473:1999 Electrical installations of buildings Part 4: Protection for safety Chapter 47: Application of protective measures for safety Section 473: Measures of protection against overcurrent
JIS C 0364-4-43:1999 Electrical installations of buildings Part 4: Protection for safety Chapter 43: Protection against overcurrent
JIS C 62852:2020 Connectors for DC-application in photovoltaic systems -- Safety requirements and tests
JIS C 8702-3:1998 Small-sized sealed lead-acid batteries (Valve-regulated types) Part 3: Safety recommendations for use in electric appliances
JIS C 8712:2006 Safety requirements for portable sealed secondary cells, and batteries made from them, for use in portable applications
JIS C 8712:2015 Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications
JIS C 62932-2-2:2021 Flow battery energy systems for stationary applications -- Part 2-2: Safety requirements
JIS B 8009-12:2001 Reciprocating internal combustion engine driven alternating current generating sets -- Part 12: Emergency power supply to safety services
JIS C 0364-4-473 AMD 1:2001 Electrical installations of buildings -- Part 4: Protection for safety -- Chapter 47: Application of protective measures for safety -- Section 473: Measures of protection against overcurrent (Amendment 1)
JIS X 5055-1:2003 Information technology -- Security techniques -- Message Authentication Codes (MACs) -- Part 1: Mechanisms using a block cipher
JIS C 0364-4-43 AMD 1:2000 Electrical installations of buildings -- Part 4: Protection for safety -- Chapter 43: Protection against overcurrent (Amendment 1)

Association Francaise de Normalisation, safe current density

NF L58-326:1966 Switchgear for aircraft. Fixing of base for 3 amperes sealed reverse current 4-pole relays.
NF L58-324:1966 Switchgear for aircraft. Fixing of base for 10 amperes miniature sealed reverse current double pole relays.
NF L58-322:1966 Switchgear for aircraft. Fixing of base for 3 amperes double pole sealed reverse current relays.
NF C53-204-7:2007 Low voltage power supplies, d.c. output - Part 7 : safety requirements.
NF C53-204-7/A11:2010 Low voltage power supplies, d.c. output - Part 7 : safety requirements.
NF X10-114:1993 Measurement of fluid flow in closed conduits. Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or pitot static tubes.
NF C78-200:1993 Electric fence energizers. Safety requirements for mains-operated electric fence energizers.
NF EN IEC 60519-8:2020 Sécurité dans les installations destinées au traitement électrothermique et électromagnétique - Partie 8 : exigences particulières pour fours de refusion sous laitier électroconducteur
NF EN 302109:2004 Télécommunications - Réseaux radio transeuropéens (TETRA) - Sécurité - Mécanisme de synchronisation pour le cryptage de bout en bout (V1.1.1)
NF C42-198-14*NF EN 61557-14:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c and 1 500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 14 : equipment for testing the safety of electrical equipment for machinery
NF EN IEC 62351-9:2023 Gestion des systèmes de puissance et échanges d'informations associés - Sécurité des communications et des données - Partie 9 : gestion de clé de cybersécurité des équipements de système de puissance
NF E37-313*NF EN ISO 8528-13:2016 Reciprocating internal combustion engine driven alternating current generating sets - Part 13 : safety
NF C71-251/A1*NF EN 62560/A1:2016 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
NF ISO 11933-5:2002 Composants pour enceintes de confinement - Partie 5 : traversées de paroi pour circuits électriques et circuits de fluide
NF EN ISO 8528-13:2016 Groupes électrogènes à courant alternatif entraînés par moteurs alternatifs à combustion interne - Partie 13 : sécurité
NF EN IEC 62477-2:2018 Exigences de sécurité applicables aux systèmes et matériels électroniques de conversion de puissance Partie 2 : convertisseurs électroniques de puissance entre 1 000 V en courant alternatif ou 1 500 V en courant continu et 36 kV en courant altern...
NF C46-971-9*NF EN 62351-9:2017 Power systems management and associated information exchange - Data and communications security - Part 9 : cyber security key management for power system equipment
NF EN IEC 60204-11:2019 Sécurité des machines - Équipement électrique des machines - Partie 11 : exigences pour les équipements fonctionnant à des tensions supérieures à 1 000 V en courant alternatif ou 1 500 V en courant continu et ne dépassant pas 36 kV
NF C58-432-2-2*NF EN IEC 62932-2-2:2020 Flow battery energy systems for stationary applications - Part 2-2 : safety requirements
NF Z82-841*NF ETS 300841:2000 Telecommunications Security - Integrated Services Digital Network (ISDN) - Encryption key management and authentification system for audiovisual services
NF C73-860/A1*NF EN 60335-2-60/A1:2005 Household and similar electrical appliances - Safety - Part 2-60 : particular requirements for whirlpool baths and whirlpool spas
NF EN IEC 61788-17:2021 Supraconductivité - Partie 17 : mesurages de caractéristiques électroniques - Densité de courant critique local et sa distribution dans les films supraconducteurs de grande surface
NF C54-102:1998 Shunt capacitors for a.c. power systems having a rated voltage above 1 kV. Part 1 : general. Performance, testing and rating. Safety requirements. Guide for installation and operation.
NF C99-115-1*NF EN 62226-1:2005 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 1 : general
NF EN 62838:2016 Lampes à LEDsi pour l'éclairage général fonctionnant à des tensions d'alimentation ne dépassant pas 50 V en courant alternatif efficace ou 120 V en courant continu lisse - Spécifications de sécurité
NF C18-472:2005 Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation.
NF C18-472*NF EN 61472:2013 Live working - Minimum approach distances for ac systems in the voltage range 72,5 kV to 800 kV - A method of calculation
NF C54-150-1*NF EN 60252-1:2011 AC motor capacitors - Part 1 : General - Performance, testing and rating - Safety requirements - Guidance for installation and operation
NF C42-198-5*NF EN 61557-5:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5 : resistance to earth.
NF C42-198-2*NF EN 61557-2:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2 : insulation resistance.
NF C31-888-17*NF EN 61788-17:2013 Superconductivity - Part 17 : electric characteristic measurements - Local critical current density and its distribution in large-area superconducting films
NF EN 50122-2:2022 Applications ferroviaires - Installations fixes - Sécurité électrique, mise à la terre et circuit de retour - Partie 2 : mesures de protection contre les effets des courants vagabonds issus de la traction électrique à courant continu
NF EN IEC 61557-6:2021 Sécurité électrique dans les réseaux de distribution basse tension au plus égale à 1 000 V c.a. et 1 500 V c.c. - Dispositifs de contrôle, de mesure ou de surveillance de mesures de protection - Partie 6 : efficacité des dispositifs à courant ...
NF EN IEC 60601-2-2:2018 Appareils électromédicaux - Partie 2-2 : exigences particulières pour la sécurité de base et les performances essentielles des appareils d'électrochirurgie à courant haute fréquence et des accessoires d'électrochirurgie à courant haute fré...
NF EN 62226-1:2005 Exposition aux champs électriques ou magnétiques à basse et moyenne fréquence - Méthodes de calcul des densités de courants induits et des champs électriques induits dans le corps humain - Partie 1 : généralités
NF C71-251*NF EN 62560:2013 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
NF C73-860*NF EN 60335-2-60:2005 Household and similar electrical appliances - Safety - Part 2-60 : particular requirements for whirlpool baths
NF EN 3545-002:2008 Série aérospatiale - Connecteurs électriques, rectangulaires, étanches et non étanches à l'arrière, à boîtier en plastique, à verrouillage, températures d'utilisation - 55 oC à 175 oC - Partie 002 : spécification de performances et d'ar...
NF F41-122-2*NF EN 50122-2:2011 Railway applications - Fixed installations - Electrical safety, earthing and the return - Part 2 : provisions against the effects of stray currents caused by d.c. traction systems.

International Organization for Standardization (ISO), safe current density

ISO 16531:2020 Surface chemical analysis — Depth profiling — Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
ISO 10790:1999 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
ISO 10790:2015 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
ISO 13359:1998 Measurement of conductive liquid flow in closed conduits - Flanged electromagnetic flowmeters - Overall length
ISO 16531:2013 Surface chemical analysis - Depth profiling - Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
ISO/IEC 7816-8:2021/DAmd 1 Identification cards — Integrated circuit cards — Part 8: Commands and mechanisms for security operations — Amendment 1: Interoperability for the interchange of security operations using quantum safe cryptography
ISO/CD 8528-13:2023 Reciprocating internal combustion engine driven alternating current generating sets — Part 13: Safety
ISO/IEC 7816-8:2021/FDAmd 1 Identification cards — Integrated circuit cards — Part 8: Commands and mechanisms for security operations — Amendment 1: Interoperability for the interchange of security operations using quantum safe cryptography
ISO/IEC 7816-8:2021/Amd 1:2023 Identification cards — Integrated circuit cards — Part 8: Commands and mechanisms for security operations — Amendment 1: Interoperability for the interchange of security operations using quantum safe cryptography
ISO 8528-13:2016 Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety
ISO 10202-3:1998 Financial transaction cards - Security architecture of financial transaction systems using integrated circuit cards - Part 3: Cryptographic key relationships
ISO 8528-12:2022 Reciprocating internal combustion engine driven alternating current generating sets — Part 12: Emergency power supply to safety services
ISO/DIS 5474-2 Electrically propelled road vehicles — Functional requirements and safety requirements for power transfer — Part 2: AC power transfer
ISO/IEC 9797-1:1999 Information technology - Security techniques - Message Authentication Codes (MACs) - Part 1: Mechanisms using a block cipher
ISO 10790:1999/Amd 1:2003 Measurement of fluid flow in closed conduits - Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements); Amendment 1: Guidance for gas measurement

API - American Petroleum Institute, safe current density

API OSAPR-1-1976 ORIFICE COEFFICIENTS FOR TWO-PHASE FLOW THROUGH VELOCITY CONTROLLED SUBSURFACE SAFETY VALVES
API REPORT 1-1976 Orifice Coefficients for Two-Phase Flow Through Velocity Controlled Subsurface Safety Valves

HU-MSZT, safe current density

International Electrotechnical Commission (IEC), safe current density

IEC 60755:2017 General safety requirements for residual current operated protective devices
IEC 62566-2:2020 Nuclear power plants - Instrumentation and control systems important to safety - Development of HDL-programmed integrated circuits - Part 2: HDL-programmed integrated circuits for systems performing c
IEC 60755-1:2022 General safety requirements for residual current operated protective devices - Part 1: Residual current operated protective devices for DC systems
IEC 61204-7:2006 Low-voltage power supplies, d.c. output - Part 7: Safety requirements
IEC 60364-4-43:2001 Electrical installations of buildings - Part 4-43: Protection for safety; Protection against overcurrent
IEC 60364-4-43/COR1:2002 Electrical installations of buildings - Part 4-43: Protection for safety; Protection against overcurrent
IEC 61204:1993 Low-voltage power supply devices, d.c. output; performance characteristics and safety requirements
IEC 62397:2007 Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors
IEC 60364-4-473:1999 Electrical installations of buildings - Part 4: Protection for safety - Chapter 47: Application of protective measures for safety - Section 473: Measures of protection against overcurrent
IEC 60364-4-473:1977 Electrical installations of buildings. Part 4 : Protection for safety. Chapter 47: Application of protective measures for safety. Section 473 - Measures of protection against overcurrent
IEC 60364-4-43:1977 Electrical installations of buildings. Part 4 : Protection for safety. Chapter 43 : Protection against overcurrent
IEC 60204-11:2018 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1000 V AC or 1500 V DC and not exceeding 36 kV
IEC 62560:2011/AMD1:2015 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
IEC 62560:2011+AMD1:2015 CSV Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
IEC 62397:2022 Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors
IEC 62351-9:2017 Power systems management and associated information exchange - Data and communications security - Part 9: Cyber security key management for power system equipment
IEC 60335-2-60:2005 Household and similar electrical appliances - Safety - Part 2-60: Particular requirements for whirlpool baths and whirlpool spas
IEC 61557-14:2013 Electrical safety in low voltage distribution systems up to 1000 V a.c and 1500 V d.c - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment for machinery
IEC 60204-11:2000 Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV
IEC 63076:2019+AMD1:2023 CSV Railway applications - Rolling stock - Electrical equipment in trolley buses - Safety requirements and current collection systems
IEC 60335-2-42:1994 Safety of household and similar electrical appliances; part 2: particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
IEC 60601-2-26:1994 Medical electrical equipment; part 2: particular requirements for the safety of electroencephalographs
IEC 62109-2:2011 Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters
IEC 62477-2:2018 Safety requirements for power electronic converter systems and equipment - Part 2: Power electronic converters from 1000 V AC or 1500 V DC up to 36 kV AC or 54 kV DC
IEC 61557-17:2021 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 17: Non-contact AC voltage indicato
IEC 60335-2-60:2002 Household and similar electrical appliances - Safety - Part 2-60: Particular requirements for whirlpool baths
IEC 61472:2004 Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation
IEC 61472:2013 Live working - Minimum approach distances for ac systems in the voltage range 72,5 kV to 800 kV - A method of calculation
IEC 61557-2:2019 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance
IEC 61557-5:2019 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth
IEC 61557-5:2019 RLV Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth
IEC 61557-2:2019 RLV Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance
IEC 60335-2-42:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
IEC 60335-2-42:2002+AMD1:2008 CSV Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
IEC 60335-2-42:2021 RLV Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
IEC 60364-4-43/AMD1:1997 Electrical installations of buildings - Part 4: Protection for safety - Chapter 43: Protection against overcurrent; Amendment 1
IEC 60335-2-42:2002 Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
IEC 61788-17:2013 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films
IEC 61788-17:2021 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films
IEC 61788-17:2021 RLV Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films
IEC 61557-7:2019 Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence
IEC 60335-2-42/AMD1:1996 Safety of household and similar electrical appliances - Part 2: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens; Amendment 1
IEC 62133:2002 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications

KR-KS, safe current density

KS B ISO 10790-2003(2023) Measurement of fluid flow in closed conduits－Guidance to the selection, installation and use of Coriolis meters (mass flow, density and volume flow measurements)
KS C IEC 62477-1-2019 Safety requirements for power electronic converter systems and equipment — Part 1: General
KS C IEC 60364-4-473-2002 Electrical installations of buildings-part4:Protection for safety Chapter 47 : Application of protective measures for safety Section473 : Measures of protection against overcurrent
KS C IEC 62351-9-2021 Power systems management and associated information exchange — data and communications security — Part 9: cyber security key management for power system equipment
KS C IEC 62932-2-2-2021 Flow battery energy systems for stationary applications —Part 2-2: safety requirements
KS C IEC 62477-2-2019 Safety requirements for power electronic converter systems and equipment — Part 2: Power electronic converters from 1 000 V AC or 1 500 V DC up to 36 kV AC or 54 kV DC
KS C IEC 60204-11-2003(2023)
KS C IEC 62128-2-2021 Railway applications — Fixed installations — Electrical safety, earthing and the return circuit — Part 2: Provisions against the effects of stray currents caused by d.c. traction systems

CENELEC - European Committee for Electrotechnical Standardization, safe current density

EN 61011:1996 Electric Fence Energizers Safety Requirements for Mains-Operated Electric Fence Energizers
EN 60519-9:1995 Safety in Electroheat Installations Part 9: Particular Requirements for High-Frequency Dielectric Heating Installations
EN 61011-1:1994 Electric Fence Energizers Part 1: Safety Requirements for Battery-Operated Electric Fence Energizers Suitable for Connection to the Supply Mains (Incorporates Amendment A2: 1994)
EN 60335-2-60:2003/fprAA:2015 Household and similar electrical appliances - Safety - Part 2-60: Particular requirements for whirlpool baths and whirlpool spas
EN 60335-2-60:1991 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Whirlpool Baths and Similar Equipment
EN 60335-2-60:1997 Safety of Household and Similar Electrical Appliances Part 2: Particular Requirements for Whirlpool Baths
EN 61557-2:1997 Electrical Safety in Low Voltage Distribution Systems up to 1 kV a.c. and 1@5 kV d.c. - Equipment for Testing@ Measuring or Monitoring of Protective Measures Part 2: Insulation Resistance
EN 61557-5:1997 Electrical Safety in Low Voltage Distribution Systems up to 1 kV a.c. and 1@5 kV d.c. - Equipment for Testing@ Measuring or Monitoring of Protective Measures Part 5: Resistance to Earth
EN 60335-2-42:2000 Safety of Household and Similar Electrical Appliances Part 2-42: Particular Requirements for Commercial Electric Forced Convection Ovens@ Steam Cookers and Steam-Convection Ovens
EN 60335-2-42:1989 Safety of Household and Similar Electrical Appliances Part 2 Particular Requirements for Commercial Electric Forced Convection Ovens
EN 60335-2-42:1995 Safety of Household and Similar Electrical Appliances - Part 2: Particular Requirements for Commercial Electric Forced Convection Ovens@ Steam Cookers and Steam-Convection Ovens (Incorporates Amendment A1: 1996)

IN-BIS, safe current density

Institute of Electrical and Electronics Engineers (IEEE), safe current density

IEEE P80/D10, April 2013 IEEE Approved Draft Guide for Safety in AC Substation Grounding
IEEE Std C95.1a-2010 Safety levels with respect to human exposure to radio frequency electromagnetic fields, 3 kHZ to 300 GHz - Amendment 1: Specifies ceiling limits for induced and contact current, clarifies distinctions between localized exposure and spatial peak power dens
IEEE Std 946-1985 IEEE Recommended Practice for the Design of Safety-Related DC Auxiliary Power Systems for Nuclear Power Generating Stations
IEEE P1711.1/D09, May 2023 IEEE Draft Standard for a Cryptographic Protocol for Cyber Security of Substation Serial Links: Substation Serial Protection Protocol

German Institute for Standardization, safe current density

DIN EN 302109:2004 Terrestrial Trunked Radio (TETRA) - Security - Synchronization mechanism for end-to-end encryption (Endorsement of the English version EN 302109 V1.1.1 (2003-10) as German standard)
DIN EN 302109:2004-08 Terrestrial Trunked Radio (TETRA) - Security - Synchronization mechanism for end-to-end encryption (Endorsement of the English version EN 302109 V1.1.1 (2003-10) as German standard) / Note: DIN ETS standards collection*Endorsement notice
DIN EN ISO 8528-13:2017-03 Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15); German version EN ISO 8528-13:2016
DIN ETS 300840:1999 Telecommunications security - Integrated Services Digital Network (ISDN) - Confidentiality system for audiovisual services (Endorsement of the English version ETS 300840:1998 as German standard)
DIN EN 62226-1:2005 Exposure to electric or magnetic fields in the low and intermediate frequency range - Methods for calculating the current density and internal electric field induced in the human body - Part 1: General (IEC 62226-1:2004); German version EN 62226-1:2005
DIN EN 62109-2:2012 Safety of power converters for use in photovoltaic power systems - Part 2: Particular requirements for inverters (IEC 62109-2:2011); German version EN 62109-2:2011

CU-NC, safe current density

NC 12-04-48-1987 Paint and Varnish Coatings. Determinación of the Deterioration Degree Through Electrical Current Intensity Measurement

Group Standards of the People's Republic of China, safe current density

T/CMSA 0014-2020 Safety requirements for systems with dual-flow lightning protection devices
T/CNSCPA 001-2023 Technical requirements of risk informed safety margin evaluation of nuclear power plants
T/CAB 0147-2022 Household and similar electrical appliances-Safety-Arrangement method for heating temperature points

Professional Standard - Energy, safe current density

NB/T 20406-2017RK Containment Isolation Device for Fluid System of PWR Nuclear Power Plant
NB/T 20031-2010 Control of hydrogen concentration in the containment after accidents in nuclear power plants of pressurized water reactor

国家能源局, safe current density

NB/T 20406-2017 Containment isolation device for fluid system of pressurized water reactor nuclear power plant

American Society for Testing and Materials (ASTM), safe current density

ASTM B114-07(2018) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
ASTM B114-07 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
ASTM B114-07(2013) Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors
ASTM E684-95(2000) Standard Practice for Approximate Determination of Current Density of Large-Diameter Ion Beams for Sputter Depth Profiling of Solid Surfaces
ASTM E684-04 Standard Practice for Approximate Determination of Current Density of Large-Diameter Ion Beams for Sputter Depth Profiling of Solid Surfaces

BE-NBN, safe current density

NBN C 71-928-1992
NBN C 71-924 ADD 1-1994
NBN C 71-924-1992
NBN C 71-928 ADD 1-1994
NBN C 71-046-1992 ELEKTRONISCHE SPANNINGSREGELAARS MET GELIJKSPANNINGS-OF WISSELSPANNINGSVOEDING VOOR GLOEILAMPEN Algemene eisen en veiligheidseisen
NBN C 74-202-1986
NBN-EN 60831-1-1994 Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V Part 1 : General - Performance, testing and rating Safety requirements - Guide for installation and operation

Danish Standards Foundation, safe current density

DS/EN 302109 V1.1.1:2004 Terrestrial Trunked Radio (TETRA); Security; Synchronization mechanism for end-to-end encryption
DS/ETS 300841:1998 Telecommunications Security - Integrated Services Digital Network (ISDN) - Encryption key management and authentication system for audiovisual services
DS/EN 62477-1:2021 Safety requirements for power electronic converter systems and equipment – Part 1: General
DS/EN 62560:2013 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
DS/EN IEC 61788-17:2021 Superconductivity – Part 17: Electronic characteristic measurements – Local critical current density and its distribution in large-area superconducting films
DS/EN 50122-2:2011 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the effects of stray currents caused by d.c. traction systems

ES-AENOR, safe current density

UNE 20 328

IEEE - The Institute of Electrical and Electronics Engineers@ Inc., safe current density

IEEE C37.85-1972 SAFETY REQUIREMENTS FOR X-RADIATION LIMITS FOR AC HIGH-VOLTAGE POWER VACUUM INTERRUPTERS USED IN POWER SWITCHGEAR
IEEE C37.85-1989 Switchgear - Alternating-Current High -Voltage Power Vacuum Interrupters - Safety Requirements for X-Radiation Limits
IEEE 946-1985 RECOMMENDED PRACTICE FOR THE DESIGN OF SAFETY- RELATED DC AUXILIARY POWER SYSTEMS FOR NUCLEAR POWER GENERATING STATIONS
IEEE C37.85A SUPP-1972 SUPPLEMENT TO SAFETY REQUIREMENTS FOR X-RADIATION LIMITS FOR AC HIGH-VOLTAGE POWER VACUUM INTERRUPTERS USED IN POWER SWITCHGEAR

Professional Standard - Urban Construction, safe current density

CJ 3062-1996 General safety requirements of gas appliances used AC power

European Committee for Standardization (CEN), safe current density

prEN 60601-2-26-1992 Medical electrical equipment; part 2: particular requirements for the safety of electroencephalographs
EN 61011:1992 Electric fence energizers; safety requirements for mains-operated electric fence energizers (IEC 1011:1989, modified)
EN 61011:1992/prAA:1992 Electric fence energizers; safety requirements for mains-operated electric fence energizers
HD 384.4.473 S1-1980 Electrical installations of buildings; part 4: protection for safety; chapter 47: application of protective measures for safety; section 473: measures of protection against overcurrent
HD 384.4.43 S1-1980 Electrical installations of buildings; part 4: protection for safety; chapter 43: protection against overcurrent
EN 61011-2:1992/prAA:1992 Electric fence energizers; safety requirements for battery-operated electric fence energizers not for connection to the supply mains
prEN ISO 8528-13 rev Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety
EN ISO 10202-3:1998 Financial Transaction Cards - Security Architecture of Financial Transaction Systems Using Integrated Circuit Cards - Part 3: Cryptographic Key Relationships ISO 10202-3:1998
EN 61011:1992/prA2:1992 Draft IEC 1011:1989, amendment 2; electric fence energizers; safety requirements for mains-operated electric fence energizers
EN 61011-1:1992 Electric fence energizers; safety requirements for battery-operated electric fence energizers suitable for connection to the supply mains (IEC 1011-1:1989, modified)
EN 61011-2:1992 Electric fence energizers; safety requirements for battery-operated electric fence energizers not for connection to the supply mains (IEC 1011-2:1990, modified)

International Telecommunication Union (ITU), safe current density

ITU-T K.50 Corrigendum 2-2021 Safe limits for operating voltages and currents in telecommunication systems powered over the network; Corrigendum 2
ITU-T K.50 Corrigendum 1-2020 Safe limits for operating voltages and currents in telecommunication systems powered over the network; Corrigendum 1
ITU-T K.50-2000 Safe Limits of Operating Voltages and Currents for Telecommunication Systems Powered over the Network Series K: Protection Against Interference Study Group 5

European Committee for Electrotechnical Standardization（CENELEC）, safe current density

HD 491.9 S1-1991 Safety in Electroheat Installations Part 9: Particular Requirements for High-Frequency Dielectric Heating Installations
EN IEC 62477-1:2023 Safety requirements for power electronic converter systems and equipment - Part 1: General
HD 384.4.473-1978 Electrical Installations of Buildings Part 4: Protection for Safety Chapter 47: Application of Protective Measures Section 473: Protection Against Overcurrent
HD 384.4.43-1978 Electrical Installations of Buildings Part 4: Protection for Safety Chapter 43: Protection Against Overcurrent
EN 62560:2012 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
EN 62560:2012/A1:2015 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
EN 62351-9:2017 Power systems management and associated information exchange - Data and communications security - Part 9: Cyber security key management for power system equipment
EN IEC 62932-2-2:2020 Flow battery energy systems for stationary applications - Part 2-2: Safety requirements
EN 60519-9:2005 Safety in electroheat installations Part 9: Particular requirements for high-frequency dielectric heating installations
EN 61472:2013 Live working - Minimum approach distances for a.c systems in the voltage range 72,5 kV to 800 kV - A method of calculation
EN 61557-2:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance
EN 61557-5:2007 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth

NL-NEN, safe current density

NEN 3584-1980 Passenger lifting platforms with low speed and limited lifting height — Safety requirements

TR-TSE, safe current density

TS 2796-1977 Heating Installations Safety Requirement For Hot Water Central Heating Systems With Flow Temperatures UpTo 110°C

ES-UNE, safe current density

UNE-EN 61557-14:2013 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 14: Equipment for testing the safety of electrical equipment of machinery (Endorsed...
UNE-EN ISO 8528-13:2017 Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15)
UNE-EN 62351-9:2017 Power systems management and associated information exchange - Data and communications security - Part 9: Cyber security key management for power system equipment (Endorsed by Asociación Española de Normalización in August of 2017.)
UNE-EN IEC 61557-6:2021 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems (Endors...
UNE-EN 62560:2013/A1:2015 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
UNE-EN 62560:2013/A11:2019 Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications
UNE-EN IEC 61788-17:2021 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films (Endorsed by Asociación Española de Normalización in July of 2021.)
UNE-EN 61788-17:2013 Superconductivity - Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films (Endorsed by AENOR in May of 2013.)
UNE-EN IEC 62932-2-2:2020 Flow battery energy systems for stationary applications - Part 2-2: Safety requirements (Endorsed by Asociación Española de Normalización in June of 2020.)

ITU-T - International Telecommunication Union/ITU Telcommunication Sector, safe current density

ITU-T K.50-2016 Safe limits for operating voltages and currents in telecommunication systems powered over the network (Study Group 5)

YU-JUS, safe current density

JUS B.Z1.063-1990 Safety in mines. Sampling coal dust for determination of coal dust explosives and determination of intensivity separating of coal dust
JUS M.E6.204-1991 Safety requirement for heat generating installations with flow temperatures up to 120°c ;closed water heating plants with thermostatic safety requirements with a static height of more than 15 m or heat output of more than 350 kw
JUS M.E6.203-1984 Water central heating plants. Hot water heating with flow temperature above 110°C and pressure in exess of 0,5 bar overpressure. Safety reguirements and assembly

未注明发布机构, safe current density

BS EN ISO 8528-13:2016(2017) Reciprocating internal combustion engine driven alternating current generating sets Part 13 : Safety
BS EN IEC 62351-9:2023 Power systems management and associated information exchange — Data and communications security Part 9 : Cyber security key management for power system equipment
BS EN ISO 10202-3:1998 Financial transaction cards — Securityarchitectureof financial transaction systems using integrated circuit cards — Part 3 : Cryptographic key relationships
BS EN 132421:1997 Harmonized system of quality assessment for electronic components — Blank detail specification : Fixed capacitors for electromagnetic interference suppression — Capacitors for which safety tests are required (Safety tests only)

Indonesia Standards, safe current density

SNI 04-6545.2-2001 Electrical safety in low-voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective meaures. Part 2: Insulation resistance
SNI 04-6545.5-2001 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing measuring or monitoring of protective measures. Part 5: Resistans to earth
SNI IEC 60252-1:2010 AC motor capsitors - part 1: general -Performance testing and rating - Safety requirements - guide for installation and operation
SNI 04-6545.6-2002 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures. Part 6: Residual current devices (RCD) in TT and TN
SNI 04-6545.1-2001 Electrical safety in low-voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures. Part 1: General requirements
SNI 04-6545.3-2001 Electrical safety in low-voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures. Part 3: Loop impedance
SNI 04-6545.4-2001 Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures. Part 4: Resistance of earth connection and equipotential bonding

European Telecommunications Standards Institute (ETSI), safe current density

ETSI EN 302 109-2003 Terrestrial Trunked Radio (TETRA); Security; Synchronization mechanism for end-to-end encryption (V1.1.1)
ETSI ES 202 109-2003 Terrestrial Trunked Radio (TETRA); Security; Synchronization Mechanism for End-To-End Encryption (V1.1.1)
ETSI ETR 235-1995 Security Techniques Advisory Group (STAG); Requirements Specification for an Encryption Algorithm for Operators of European Public Telecommunications Networks

工业和信息化部, safe current density

YD/T 4175-2022 Electrical safety technical requirements and test methods for communication equipment using 240V/336V DC power supply

ZA-SANS, safe current density

SANS 60204-11:2000 Safety of machinery - Electrical equipment of machines Part 11: Requirements for HV equipment for voltages above 1 000 V a.c or 1 500 V d.c and not exceeding 36 kV

VDI - Verein Deutscher Ingenieure, safe current density

VDI/VDE 2180 Blatt 5-1969 Sicherung von Anlagen der Verfahrenstechnik; Hilfsenergieversorgung der Einrichtungen zum Messen@ Steuern und Regeln

IEC - International Electrotechnical Commission, safe current density

IEC TR 62351-90-2:2018 Power systems management and associated information exchange – Data and communications security – Part 90-2: Deep packet inspection of encrypted communications (Edition 1.0)

US-CFR-file, safe current density

CFR 33-165.929-2014 Navigation and navigable waters. Part165:Regulated navigation areas and limited access areas. Section165.929:Safety Zones; Annual events requiring safety zones in the Captain of the Port Lake Michigan zone.

TH-TISI, safe current density

TIS 1781-1999 Safety of household and similar electrical appliances.part 2: particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens

Canadian Standards Association (CSA), safe current density

CSA C22.2 No.60601-2-22-01-2001 Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Diagnostic and Therapeutic Laser Equipment Second Edition; IEC 601-2-22:1995