ZH
RU
ES

Sensitive balance

Sensitive balance, Total:122 items.

In the international standard classification, Sensitive balance involves: Fasteners for aerospace construction, Measurement of volume, mass, density, viscosity, Measurement of force, weight and pressure, Acoustics and acoustic measurements, Gas and steam turbines. Steam engines, Fuels, Geology. Meteorology. Hydrology, Air quality, Space systems and operations, Corrosion of metals, Electrical and electronic testing, Internal combustion engines, Aerospace fluid systems and components, Raw materials for rubber and plastics, On-board equipment and instruments, Telecommunication systems, Components and accessories for telecommunications equipment, Electrical engineering in general, Protection against electric shock, Extraction and processing of petroleum and natural gas, Aerospace electric equipment and systems, Environmental protection, Photography, Radiocommunications, Equipment for petroleum and natural gas industries, Non-metalliferous minerals, Microbiology, Applications of information technology, Components for electrical equipment, Non-ferrous metals, Diagnostic, maintenance and test equipment, Road vehicle systems.

CU-NC, Sensitive balance

NC 90-06-44-1986 Metrological Assurance. Analytical Balances. Measurement Methods
NC 90-06-37-1984 Metrological Assurance. BalanceBar and Sliding Block Scales Verification Methods and Means

IET - Institution of Engineering and Technology, Sensitive balance

PRINC PLANAR NEAR-FLD ANT MEAS-2007 Principles of Planar Near-Field Antenna Measurements

Association Francaise de Normalisation, Sensitive balance

NF EN 3830:2022 Série aérospatiale - Réseau électrique - Bilan électrique
FD T66-080:2016 Bituminous emulsions - Determination of water content - Evaporation procedure using drying balance
NF C93-557-6*NF EN 62037-6:2014 Passive RF and microwave devices, intermodulation level measurement - Part 6 : measurement of passive intermodulation in antennas
NF P98-613:1993 Horizontal road markings. Railway markings. Reflectivity in rainy conditions: On-site measurement methods
NF C93-557-6*NF EN IEC 62037-6:2022 Passive RF and microwave devices, intermodulation level measurement - Part 6 : measurement of passive intermodulation in antennas
NF EN 3475-802:2009 Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 802 : déséquilibre de capacité
NF EN IEC 62037-6:2022 Dispositifs RF et à micro-ondes passifs, mesure du niveau d'intermodulation - Partie 6 : mesure de l'intermodulation passive dans les antennes
NF M87-296*NF EN ISO 17349:2016 Petroleum and natural gas industries - Guidelines for offshore platforms handling streams with high content of CO2 at high pressures
NF A09-212:1984 Industrial radiography. Determination of the speed and average gradient of film-based image receiving systems for use in the energy range from 50 keV to 300 keV.
NF T66-082*NF EN 16849:2016 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance
NF P98-611:1993 Horizontal road signs. Railway signs. Visibility of signs in clear weather conditions: In situ dynamic measurement methods
NF EN 60738-1-4:2014 Thermistances à basculement à coefficient de température positif à chauffage direct - Partie 1-4 : spécification particulière cadre - Application de la détection - Niveau d'assurance de la qualité EZ
NF EN 16849:2016 Bitumes et liants bitumineux - Détermination de la teneur en eau des émulsions de bitume - Méthode par évaporation à la balance dessiccatrice
NF EN 62489-2:2014 Électroacoustique - Systèmes de boucles d'induction audiofréquences pour améliorer l'audition - Partie 2 : méthodes de calcul et de mesure des émissions de champ magnétique basse fréquence à partir de la boucle pour l'évaluation de la conf...
NF A09-213:1986 Non-destructive testing. Industrial neutron radiography. Determination of the speed and average contrast of silver based film image reception systems using electrons with an energy less than 200 keV.

ECIA - Electronic Components Industry Association, Sensitive balance

EIA-364-69A-2002 TP-69A Low Level Induction Measurement for Electrical Contacts of Electrical Connectors
364-69-1989 TP-69 Low-Level Inductance Measurement for Electrical Contacts of Electrical Connectors

Electronic Components, Assemblies and Materials Association, Sensitive balance

ECA EIA-364-69A-2002 TP-69A Inductance Measurement Test Procedure for Electrical Connectors and Sockets (10 nH - 100 nH)

Professional Standard - Electron, Sensitive balance

SJ 20401-1994 Methods of measurement for isolated slot of planar waveguide-fed slot arrays

AENOR, Sensitive balance

UNE 55124:1981 FATS AND OILS. SENSORIAL ANALYSIS. CLASSIFICATION OF VIRGIN OLIVE OILS WITH THE AID OF A SCALE
UNE-EN 62037-6:2015 Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas

RU-GOST R, Sensitive balance

GOST 29329-1992 Balance for static weighing. General technical requirements
GOST R 55975-2014 Sensors and transforming equipment space rocket technology. Somparative evaluation of the technical level and choice in terms of quality
GOST 8.453-1982 State system for ensuring the uniformity of measurements. Balance for static weighting. Methods and means for verification
GOST R 56539-2015 Gas and gas-condensate fields projection and development. Estimation of gas and gas-condensate reserves on the basis of material balance equation. General technical requirements
GOST 28999-1991 Inductor and transformer cores for telecommunication. Part 2. Blank detal specification magnetic oxide cores for inductor application. Assessment level A

CN-STDBOOK, Sensitive balance

图书 A-4464 Calibration and Maintenance Guide for Measuring Instruments Balance Weights
图书 a-4505 Measuring Instrument Verification and Maintenance Guide Electronic Balance

American National Standards Institute （ANSI), Sensitive balance

ANSI/ESD STM11.11-2021 The Protection of Electrostatic Discharge Susceptible Items - Surface Resistance Measurement of Planar Materials
ANSI/ESD STM11.12-2021 The Protection of Electrostatic Discharge Susceptible Items - Volume Resistance Measurement of Planar Materials
ANSI/ASTM D7739:2011 Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
ANSI/ESD STM11.11-1993 ESD Association Standard Test Method for the Protection of Electrostatic Discharge Susceptible Items - Surface Resistance Measurement of Static Dissipative Planar Materials
ANSI/ESD STM11.12-2000 Test Method for Protection of Electrostatic Discharge Susceptible Items - Volume Resistance Measurements of Static Dissipative Planar Materials

国家市场监督管理总局、中国国家标准化管理委员会, Sensitive balance

GB/T 7966-2022 Acoustics—Ultrasonic power measurement—Radiation force balances and the requirements
GB/T 40602.2-2021 Antennas and reception systems for radio interference—Part 2:Basic measurement—Method for near field measuring high gain antenna pattern in microwave anechoic chamber

Professional Standard - Meteorology, Sensitive balance

QX/T 307-2015 Observation method of atmospheric aerosol mass concentration.Tapered element oscillating microbalance

CZ-CSN, Sensitive balance

CSN 17 7010-1974 Balance with non-automatic function of accuracy class 1 to 4. Basic metrological regulations

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sensitive balance

GB/T 7966-2009 Acoustics.Ultrasonics power measurement.Radiation force balances and performance requirements
GB/T 4325.11-2013 Methods for chemical analysis of molybdenum.Part 11:Determination of aluminum content.Chromazurol S spectrophotometry and inductively coupled plasma atomic emission spectrometry

Group Standards of the People's Republic of China, Sensitive balance

T/ACEF 082-2023 Fixed wing general aviation platforms Technical guidance for airborne remote sensing measurement of atmospheric gaseous pollutants
T/AHEPI 0001-2023 Technical guide for space - air - ground integration hyperspectral remote sensing traceability of trace gases emissions
T/CICEIA /CAMS46-2022 Space-Ground-Vehicle-People integration(SGVP)-Mobile source emission monitoring system- Diesel sulfur content sensor
T/CICEIA /CAMS41-2022 Space-Ground-Vehicle-People integration (SGVP) - Mobile source emission monitoring system - Specifications for rapid measurement and evaluation of vehicle emissions: Remote sensing method

United States Navy, Sensitive balance

NAVY MIL-W-3947 B NOTICE 2-1997 WEIGHT AND BALANCE CONTROL SYSTEM FOR GUIDED MISSILES AND SPACE LAUNCH VEHICLES
NAVY MIL-W-3947 B VALID NOTICE 1-1991 WEIGHT AND BALANCE CONTROL SYSTEM FOR GUIDED MISSILES AND SPACE LAUNCH VEHICLES
NAVY MIL-W-3947 B-1969 WEIGHT AND BALANCE CONTROL SYSTEM FOR GUIDED MISSILES AND SPACE LAUNCH VEHICLES

American Society for Testing and Materials (ASTM), Sensitive balance

ASTM B808-10 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
ASTM D7739-11 Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
ASTM D7739-11(2020) Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
ASTM B808-05 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
ASTM B808-97 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
ASTM B808-97(2003) Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
ASTM B808-10(2015) Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
ASTM D7739-11(2016) Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
ASTM E2101-00 Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
ASTM E2101-00(2005) Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
ASTM D6831-05a Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-05 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-02 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM E2101-14 Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
ASTM D6831-11(2018) Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Sensitive balance

ASHRAE 4256-1999 Measurements of Volatile Organic Compound (VOC) Emissions from Wood Stains Using an Electronic Balance
ASHRAE 4012-1997 Sensitivity Study of Floor and Ceiling Plenum Energy Model Parameters (RP-787)
ASHRAE LV-11-C031-2011 Measured Levels of Hospital Noise Before@ During@ and After Renovation of a Hospital Wing@ and a Survey of Resulting Patient Perception

British Standards Institution (BSI), Sensitive balance

BS ISO 18170:2017 Aerospace series. AC induction electric motor driven, variable delivery, hydraulic pumps. General requirements
BS ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
BS EN IEC 62037-6:2022 Tracked Changes. Passive RF and microwave devices, intermodulation level measurement. Measurement of passive intermodulation in antennas
BS EN 62037-6:2013 Passive RF and microwave devices, intermodulation level measurement. Measurement of passive intermodulation in antennas
BS EN 3475-802:2002 Aerospace series - Cables, electrical, aircraft use - Test methods - Capacitance unbalance
23/30466266 DC BS ISO 18170. Aerospace series. AC induction electric motor driven, variable delivery, hydraulic pumps. General requirements
20/30409226 DC BS EN IEC 62037-6. Passive RF and microwave devices, intermodulation level measurement. Part 6. Measurement of passive intermodulation in antennas
BS EN ISO 17349:2016 Petroleum and natural gas industries. Offshore platforms handling streams with high content of CO2 at high pressures

International Organization for Standardization (ISO), Sensitive balance

ISO 16564:2004 Rubber, raw natural - Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
ISO 18170:2017 Aerospace series - AC induction electric motor driven, variable delivery, hydraulic pumps - General requirements
ISO 16564:2004/Amd 1:2006 Rubber, raw natural — Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC) — Amendment 1
ISO 17349:2016 Petroleum and natural gas industries - Offshore platforms handling streams with high content of CO2 at high pressures
ISO 9218:2002 Aerospace - Washers, flat, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated - Dimensions and masses
ISO 12208:2015 Space systems - Space environment (natural and artificial) - Observed proton fluences over long duration at GEO and guidelines for selection of confidence level in statistical model of solar proton fluences
ISO/TS 12208:2011 Space systems - Space environment (natural and artificial) - Observed proton fluences over long duration at GEO and guideline for selection of confidence level in statistical model of solar proton fluences
ISO/IEC 10373-6:2011/Cor 1:2013 Identification cards.Test methods.Part 6: Proximity cards.Technical Corrigendum 1: R2 value range, start of PICC transmission and program for EMD level measurement; Technical Corrigendum 1
ISO/TR 10305-2:2003 Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz

Korean Agency for Technology and Standards (KATS), Sensitive balance

KS M ISO 16564:2007 Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS M ISO 16564-2007(2022) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS M ISO 16564-2007(2017) Rubber, raw natural－Determination of average molecular mass and molecular－mass distribution by size exclusion chromatography(SEC)
KS C IEC TS 61094-7:2017 Electroacoustics — Measurement microphones — Part 7: Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones
KS W ISO 9218-2005(2020) Aerospace－Washers, flat, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated－Dimensions and masses
KS W ISO 9218:2005 Aerospace－Washers, flat, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated－Dimensions and masses

ZA-SANS, Sensitive balance

SANS 302:2005 Non-automatic, undenominated beam scales and balances subject to legal metrology control

SAE - SAE International, Sensitive balance

SAE ARP5602/9-2008 A Guideline for Aerospace Platform Fiber Optic Training and Awareness Education Aerospace Fiber Optics Quality Assurance Knowledge Competencies

Danish Standards Foundation, Sensitive balance

DS/EN 62037-6:2013 Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas
DS/ISO/TR 10305-2:2003 Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz

European Committee for Electrotechnical Standardization（CENELEC）, Sensitive balance

EN 62037-6:2013 Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas

International Electrotechnical Commission (IEC), Sensitive balance

IEC 62037-6:2021 RLV Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas
IEC 62037-6:2021 Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas
IEC 62037-6:2013 Passive R.F. and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas

未注明发布机构, Sensitive balance

BS ISO 16564:2004(2006) Rubber, raw natural — Determination of averagemolecularmass and molecular - mass distribution by size exclusion chromatography (SEC)

ES-UNE, Sensitive balance

UNE-EN IEC 62037-6:2022 Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas
UNE-EN ISO 17349:2016 Petroleum and natural gas industries - Offshore platforms handling streams with high content of CO2 at high pressures (ISO 17349:2016) (Endorsed by AENOR in April of 2016.)
UNE-EN 16849:2017 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Sensitive balance

REPORT RA.2188-2010 Power flux-density and e.i.r.p. levels potentially damaging to radio astronomy receivers

European Committee for Standardization (CEN), Sensitive balance

EN ISO 17349:2016 Petroleum and natural gas industries - Offshore platforms handling streams with high content of CO2 at high pressures
EN 3475-802:2002 Aerospace Series - Cables, Electrical, Aircraft Use - Test Methods - Part 802: Capacitance Unbalanced

ESD - ESD ASSOCIATION, Sensitive balance

STM11.12-2000 Standard Test Method for the Protection of Electrostatic Discharge Susceptible Items - Volume Resistance Measurements of Static Dissipative Planar Materials

CEN - European Committee for Standardization, Sensitive balance

EN 3475-802:2009 Aerospace series - Cables@ electrical@ aircraft use - Test methods - Part 802: Capacitance unbalance
PREN 16849-2015 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance

KR-KS, Sensitive balance

KS C IEC TS 61094-7-2017 Electroacoustics — Measurement microphones — Part 7: Values for the difference between free-field and pressure sensitivity levels of laboratory standard microphones

工业和信息化部, Sensitive balance

YD/T 2827.6-2015 Methods for measuring passive intermodulation levels of radio frequency and microwave devices for wireless communications Part 6: Antennas

German Institute for Standardization, Sensitive balance

DIN EN 16849:2016-12 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Method using a drying balance; German version EN 16849:2016
DIN EN ISO 17349:2016-07 Petroleum and natural gas industries - Offshore platforms handling streams with high content of CO<(Index)2> at high pressures (ISO 17349:2016); English version EN ISO 17349:2016
DIN EN 62037-6:2013 Passive RF and microwave devices, intermodulation level measurement - Part 6: Measurement of passive intermodulation in antennas (IEC 62037-6:2013); German version EN 62037-6:2013
DIN EN ISO 17349:2016 Petroleum and natural gas industries - Offshore platforms handling streams with high content of CO at high pressures (ISO 17349:2016); English version EN ISO 17349:2016
DIN EN 3475-802:2009 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 802: Capacitance unbalance; German and English version EN 3475-802:2009

Henan Provincial Standard of the People's Republic of China, Sensitive balance

DB41/T 1439-2017 Trona chemical analysis method Determination of 11 elements such as sodium and potassium Inductively coupled plasma emission spectrometry

Standard Association of Australia （SAA）, Sensitive balance

AS 3580.9.8:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 continuous direct mass method using a tapered element oscillating microbalance analyser

Aerospace, Security and Defence Industries Association of Europe (ASD), Sensitive balance

ASD-STAN PREN 2717-2010 Aerospace series Test method - Determination of susceptibility to intergranular corrosion Wrought aluminium alloy products in AL-P5XXX series with a magnesium content = 3,5% Edition P3

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Sensitive balance

PREN 2717-2010 Aerospace series Test method - Determination of susceptibility to intergranular corrosion Wrought aluminium alloy products in AL-P5XXX series with a magnesium content ≥ 3@5% (Edition P3)
PREN 2717-1996 Aerospace Series Test Methods Determination of Susceptibility to Intergranular Corrosion Wrought Aluminium Alloy Products in AL-P5XXX- Series with a Magnesium Content Greater Than or Equal to 3@5% (Edition P 2)

国家能源局, Sensitive balance

SY/T 4216.1-2017 Specifications for Construction Quality Acceptance of Oil and Gas Construction Projects Oil and Gas Transmission Pipeline Crossing Projects Part 1: Horizontal Directional Drilling Crossings