ZH
RU
ES

elemental content of combustion

elemental content of combustion, Total:495 items.

In the international standard classification, elemental content of combustion involves: Soil quality. Pedology, Conducting materials, Fuels, Coals, Wastes, Water quality, Crude petroleum, Rubber, Metalliferous minerals, Analytical chemistry, Non-metalliferous minerals, Protection against fire, Materials for the reinforcement of composites, Fertilizers, Electrical wires and cables, Equipment for entertainment, Paints and varnishes, Ferroalloys, Ferrous metals, Non-ferrous metals, Testing of metals, Petroleum products in general, Powder metallurgy, Pulps, Nuclear energy engineering, Power stations in general, Products of the chemical industry, Explosion protection, Animal feeding stuffs, Test conditions and procedures in general, Burners. Boilers, Cereals, pulses and derived products, Inorganic chemicals, Occupational safety. Industrial hygiene, Welding, brazing and soldering, Materials for aerospace construction, General methods of tests and analysis for food products, Edible oils and fats. Oilseeds, Road engineering, Products of non-ferrous metals, Raw materials for rubber and plastics, Farming and forestry, Medical equipment, Natural gas, Milk and milk products.

Korean Agency for Technology and Standards (KATS), elemental content of combustion

KS I ISO 13878-2009(2019) Soil quality－Determination of total nitrogen content by dry combustion(“elemental analysis”)
KS I ISO 13878:2009 Soil quality－Determination of total nitrogen content by dry combustion(“elemental analysis”)
KS I ISO 10694:2021 Soil quality — Determination of organic and total carbon after dry combustion(elementary analysis)
KS I ISO 10694-2005(2015) Soil quality－Determination of organic and total carbon after dry combustion(elementary analysis)
KS E ISO 4690:2002 Iron ores－Determination of sulfur content－Combustion method
KS E ISO 4690:2007 Iron ores-Determination of sulfur content-Combustion method
KS M 1925-2009 Urea for industrial use－Determination of iron content－2,2′-bipyridyl photometric method
KS M ISO 16968:2021 Solid biofuels — Determination of minor elements
KS E ISO 351:2003 Solid mineral fuels－Determination of total sulfur－High temperature combustion method
KS D 1938-2003(2013) Determination of element content in zinc and zinc alloy
KS C IEC 60754-1:2019 Test on gases evolved during combustion of materials from cables — Part 1: Determination of the halogen acid gas content
KS D ISO 671:2002 Steel and cast iron－Determination of sulphur content－Combustion titrimetric method
KS E ISO 4689-2:2006 Iron ores-Determination of sulfur content-Part 2:Combustion/titration method
KS D ISO 671-2002(2017) Steel and cast iron－Determination of sulphur content－Combustion titrimetric method
KS E ISO 4689-2:2017 Iron ores－Determination of sulfur content－Part 2：Combustion/titration method
KS D ISO 671-2002(2022) Steel and cast iron－Determination of sulphur content－Combustion titrimetric method
KS E ISO 609:2003 Solid mineral fuels－Determination of carbon and hydrogen sulfur－High temperature combustion method
KS M ISO 1762:2020 Paper, board, pulps and cellulose nanomaterials —Determination of residue (ash content) on ignition at 525 ℃
KS I ISO 10694:2005 Soil quality－Determination of organic and total carbon after dry combustion(elementary analysis)
KS M 0180-2009(2019) Standard test method for halogen(F, Cl, Br) and sulfur content by oxidative pyrohydrolytic combustion followed by ion chromatography detection (Combustion ion chromatography－CIC)
KS D ISO 437-2001(2016) Steel and cast iron－Determination of total carbon content－Combustion gravimetric method
KS D ISO 437:2001 Steel and cast iron－Determination of total carbon content－Combustion gravimetric method
KS D ISO 437:2021 Steel and cast iron — Determination of total carbon content —Combustion gravimetric method
KS D ISO 7266:2002 Copper and copper alloys-Determination of sulfur content-Combustion titrimetric method
KS E ISO 4689-3:2006 Iron ores-Determination of sulfur content-Part 3:Combustion/infrared method
KS E ISO 4689-3:2017 Iron ores－Determination of sulfur content－Part 3：Combustion/infrared method
KS D ISO 7266-2002(2022) Copper and copper alloys－Determination of sulfur content－Combustion titrimetric method
KS D ISO 3110:2002 Copper alloys－Determination of aluminium as alloying element－Volumetric method
KS D ISO 3111:2002 Copper alloys－Determination of tin as alloying element－Volumetric method
KS D ISO 4830-4:2005 Steel-Determination of low carbon contents-Part 4:Coulometric method after combustion
KS E ISO 4689-2:2022 Iron ores ― Determination of sulfur content ― Part 2: Combustion/titration method
KS M ISO 6528-3-2006(2011) Rubber－Determination of total sulfur content－Part 3：Furnace combustion method
KS D ISO 4830-4-2005(2010) Steel－Determination of low carbon contents－Part 4：Coulometric method after combustion
KS E ISO 4689-3:2022 Iron ores ― Determination of sulfur content ― Part 3: Combustion/infrared method
KS D ISO 4830-4:2013 Steel－Determination of low carbon contents－Part 4：Coulometric method after combustion
KS A ISO 16424-2013(2018) Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements
KS M ISO 6528-1:2006 Rubber-Determination of total sulfur content-Part 1:Oxygen combustion flask method
KS D ISO 9556:2021 Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace
KS D ISO 9556-2001(2016) Steel and iron-Determination of total carbon content-Infrared absorption method after combustion in an induction furnace
KS M ISO 4260-2003(2018)
KS D ISO 4935:2002 Steel and iron－Determination of total sulphur content－Infrared absorption method after combustion in an induction furnace
KS D ISO 4935-2002(2022) Steel and iron－Determination of total sulphur content－Infrared absorption method after combustion in an induction furnace
KS D ISO 4935-2002(2017) Steel and iron－Determination of total sulphur content－Infrared absorption method after combustion in an induction furnace
KS D ISO 11438-3:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 3:Determination of antimony content
KS D ISO 11438-5:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 5:Determination of tellurium content
KS D ISO 11438-7:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 7:Determination of silver content
KS D ISO 11438-2:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 2:Determination of lead content
KS D ISO 11438-4:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 4:Determination of tin content
KS D ISO 11438-6:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 6:Determination of thallium content
KS D ISO 11438-8:2012 Ferronickel-Determination of trace-element content by electrothermal atomic absorption spectrometric method-Part 8:Determination of indium content
KS D ISO 11438-2:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 2：Determination of lead content
KS D ISO 11438-3:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 3：Determination of antimony content
KS D ISO 11438-4:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 4：Determination of tin content
KS D ISO 11438-5:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 5：Determination of tellurium content
KS D ISO 11438-6:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 6：Determination of thallium content
KS D ISO 11438-7:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 7：Determination of silver content
KS D ISO 11438-8:2016 Ferronickel－Determination of trace-element content by electrothermal atomic absorption spectrometric method－Part 8：Determination of indium content
KS I ISO 14869-2:2019 Soil quality — Dissolution for the determination of total element content ― Part 2: Dissolution by alkaline fusion
KS M ISO 6997:2003 Carbonaceous materials for the production of aluminium-Calcined coke-Determination of apparent oil content-Heating method
KS M ISO 8723:2004 Carbonaceous materials for the production of aluminium－Calcined coke－Determination of oil content－Method by solvent extraction
KS M ISO 6997:2013 Carbonaceous materials for the production of aluminium－Calcined coke－Determination of apparent oil content－Heating method
KS D ISO 13902:2002 Steel and iron－Determination of high sulfur content－Infrared absorption method after combustion in an induction furnace
KS D ISO 9556:2001 Steel and iron-Determination of total carbon content-Infrared absorption method after combustion in an induction furnace
KS D ISO 7527-2012(2022) Nickel, ferronickel and nickel alloys－Determination of sulfur content－Iodimetric titration method after induction furnace combustion
KS D ISO 2355:2002 Magnesium and its alloys－Determination of rare earths－Gravimetric method
KS M ISO 8658:2003 Carbonaceous materials for use in the production of aluminium－Green and calcined coke－Determination of trace elements by flame atomic absorption spectroscopy
KS D ISO 10719:2021 Cast irons — Determination of non-combined carbon content —Infrared absorption method after combustion in an induction furnace
KS M ISO 4260:2003 Petroleum products and hydrocarbons－Determination of sulfur content－Wickbold combustion method
KS D ISO 10719-2006(2016) Steel and iron－Determination of non-combined carbon content－Infrared absorption method after combustion in an induction furnace
KS I ISO 14869-2:2009 Soil quality－Dissolution for the determination of total element content－Part 2：Dissolution by alkaline fusion
KS D ISO 4503:2003 Hardmetals-Determination of contents of metallic elements by X-ray fluorescence-Fusion method
KS D ISO 4883:2003 Hardmetals－Determination of contents of metallic elements by X－ray fluorescence－Solution method

German Institute for Standardization, elemental content of combustion

DIN ISO 13878:1998 Soil quality - Determination of total nitrogen content by dry combustion ("elemental analysis") (ISO 13878:1998)
DIN ISO 10694:1996 Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis) (ISO 10694:1995)
DIN 22022-2:2001 Solid fuels - Determination of contents of trace elements - Part 2: ICP-OES
DIN 22022-7:2014 Solid fuels - Determination of contents of trace elements - Part 7: ICP-MS
DIN 22022-7:2014-07 Solid fuels - Determination of contents of trace elements - Part 7: ICP-MS
DIN 22022-2:2001-02 Solid fuels - Determination of contents of trace elements - Part 2: ICP-OES
DIN EN 14582:2007 Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods English version of DIN EN 14582:2007-06
DIN 22022-3:2001 Solid fuels - Determination of trace elements - Part 3: AAS-flame method
DIN 51733:2016 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
DIN 51733:2008 Testing of solid mineral fuels - Ultimate analysis and calculation of oxygen content
DIN EN 14582:2016-12 Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods; German version EN 14582:2016
DIN EN ISO 16968:2015-09 Solid biofuels - Determination of minor elements (ISO 16968:2015); German version EN ISO 16968:2015
DIN EN 14582:2016 Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods; German version EN 14582:2016
DIN 51408-1:1983 Testing of liquid petroleum hydrocarbons; determination of chlorine content; Wickbold combustion method
DIN EN 15410:2011-11 Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti); German version EN 15410:2011
DIN 22022-5:2001 Solid fuels - Determination of trace elements - Part 5: Atomic absorption spectrometry applying the electrothermal atomization
DIN EN ISO 9556:2002-04 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace (ISO 9556:1989); German version EN ISO 9556:2001
DIN ISO 4503:1991 Hardmetals; determination of contents of metallic elements by x-ray fluorescence; fusion method; identical with ISO 4503:1978
DIN ISO 14869-2:2003-01 Soil quality - Dissolution for the determination of total element content - Part 2: Dissolution by alkaline fusion (ISO 14869-2:2002)
DIN EN 15411:2011-11 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn); German version EN 15411:2011
DIN EN ISO 16424:2018 Nuclear energy - Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of GdO content in gadolinium fuel pellets by measurements of uranium and gadolinium elements (ISO 16424:2012)
DIN 22022-4:2001-02 Solid fuels - Determination of contents of trace elements - Part 4: Atomic absorption spectrometry applying the flameless hydride system or the cold-vapour-method
DIN 22022-1:2014-07 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN EN 24260:1994 Petroleum products and hydrocarbons; determination of sulfur content; Wickbold combustion method (ISO 4260:1987); German version EN 24260:1994
DIN EN 24935:1992 Determination of sulfur content of steel and iron by infrared absorption spectroscopy after combustion in an induction furnace (ISO 4935:1989); german version EN 24935:1991
DIN EN ISO 21789:2020-06 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020); German version EN ISO 7526:2020
DIN EN ISO 7526:2020-06 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020); German version EN ISO 7526:2020
DIN ISO 14869-2:2003 Soil quality - Dissolution for the determination of total element content - Part 2: Dissolution by alkaline fusion (ISO 14869-2:2002)
DIN 22022-1:2014 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation - Preparation of samples for the analyses (dissolution method)
DIN 22022-1:2001 Solid fuels - Determination of contents of trace elements - Part 1: General rules, sampling and sample preparation; Preparation of samples for the analyses (dissolution method)

Association Francaise de Normalisation, elemental content of combustion

NF ISO 13878:1998 Qualité du sol - Détermination de la teneur totale en azote par combustion sèche ("analyse élémentaire")
NF X31-409*NF ISO 10694:1995 Soil quality. Determination of organic and total carbon after dry combustion (elementary analysis).
NF X31-418*NF ISO 13878:1998 Soil quality. Determination of total nitrogen content by dry combustion ("elemental analysis").
NF X30-406:2007 Characterisation of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods.
NF X30-406*NF EN 14582:2016 Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods
NF EN 15962:2011 Engrais - Dosage de la teneur en oligo-élément complexé et de la fraction complexée des oligo-éléments
NF A20-407*NF ISO 4690:1987 Iron ores. Determination of sulphur content. Combustion method.
NF EN ISO 16424:2018 Énergie nucléaire - Évaluation de l'homogénéité de la distribution du Gd dans les mélanges de combustibles au gadolinium et détermination de la teneur en Gd2O3 dans les pastilles combustibles au gadolinium par mesurage des éléments uranium e...
NF EN 14582:2016 Caractérisation des déchets - Teneur en halogènes et en soufre - Combustion sous oxygène en systèmes fermés et méthodes de dosage
NF EN ISO 16968:2015 Biocombustibles solides - Détermination des éléments mineurs
NF X34-224*NF EN 15410:2011 Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti).
XP CEN/TS 17786-2:2022 Engrais inorganiques à base d'oligo-éléments - Détermination de la teneur en oligo-éléments chélatés et de la fraction chélatée des oligo-éléments - Partie 2 : dosage de l'EDTA, du DTPA, du HEEDTA, de l'IDHA ou de l'EDDS
NF X31-429*NF ISO 15178:2001 Soil quality - Determination of total sulfur by dry combustion.
NF A95-771-2:1988 Sintered metal materials. Specifications. Part 2 : sintered iron and sintered steel containing one or both of the elements carbon and copper, used for structural parts.
NF M60-406:2009 Nuclear energy - Nuclear fuel technology - Determination of plutonium in nitric acid solutions by spectrophotometry.
NF M60-406*NF EN ISO 9463:2021 Nuclear Energy - Nuclear Fuel Technology - Determination of plutonium in nitric acid solutions by spectrophotometry
XP CEN/TS 17788:2022 Engrais organo-minéraux - Détermination de la fraction d'oligo-éléments complexés
NF A06-719*NF ISO 7266:1986 Copper and copper alloys. Determination of sulfur content. Combustion titrimetric method.
XP CEN/TS 17786-1:2022 Engrais inorganiques à base d'oligo-éléments - Détermination de la teneur en oligo-éléments chélatés et de la fraction chélatée des oligo-éléments - Partie 1 : traitement avec une résine échangeuse de cations
NF EN IEC 60754-3:2019 Essai sur les gaz émis lors de la combustion des matériaux prélevés sur câbles - Partie 3 : mesure d'une faible teneur en halogène par chromatographie ionique
NF V18-120:1997 Animal feeding stuffs. Determination of nitrogen content. Combustion method (DUMAS).
NF EN 15410:2011 Combustibles solides de récupération - Méthodes de détermination de la teneur en éléments majeurs (Al, Ca, Fe, K, Mg, Na, P, Si et Ti)
NF ISO 10694:1995 Qualité du sol - Dosage du carbone organique et du carbone total après combustion sèche (analyse élémentaire)
NF ISO 247-1:2018 Caoutchouc - Détermination du taux de cendres - Partie 1 : technique de combustion sèche
XP X30-489:2013 Caractérisation des déchets - Détermination de la teneur en éléments et substances des déchets
XP CEN/TS 17790:2022 Engrais organo-minéraux - Détermination de la teneur en oligo-éléments chélatés et de la fraction chélatée d'oligo-éléments par traitement avec une résine échangeuse de cations
NF M60-470:2014 Nuclear energy - Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements
NF A06-902*NF EN 12938:2000 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry.
NF EN ISO 7526:2020 Ferronickels - Détermination de la teneur en soufre - Méthode par absorption dans l'infrarouge après combustion dans un four à induction
XP CEN/TS 17783:2022 Fertilisants - Détermination de la stabilité des fertilisants contenant des oligo-éléments complexés
NF M60-470*NF EN ISO 16424:2018 Nuclear energy - Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements
XP U42-764*XP CEN/TS 17790:2022 Organo-mineral fertilizers - Determination of the chelated micronutrient content and the chelated fraction of micronutrients by treatment with a cation exchange resin
NF A06-391*NF EN ISO 9556:2001 Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace
NF A54-106*NF ISO 7524:2020 Ferronickels - Determination of carbon content - Infrared absorption method after induction furnace combustion
NF A10-621*NF EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion
NF ISO 14869-2:2002 Qualité du sol - Mise en solution pour la détermination des teneurs élémentaires totales - Partie 2 : mise en solution par fusion alcaline
NF ISO 7524:2020 Ferronickels - Détermination de la teneur en carbone - Méthode par absorption dans l'infrarouge après combustion dans un four à induction
NF A06-367*NF EN 24935:1992 Steel and iron. Determination of sulfur content. Infrared absorption method after combustion in an induction furnace.
NF X34-225*NF EN 15411:2011 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn).
NF A10-622*NF EN 27527:1992 Nickel, ferronickel and nickel alloys. Determination of sulfur content. Iodimetric titration method after induction furnace combustion.
NF T60-142*NF EN 24260:1994 Petroleum products and hydrocarbons. Determination of sulfur content. Wickbold combustion method.
NF EN 15411:2011 Combustibles solides de récupération - Méthodes de détermination de la teneur en éléments à l'état de traces (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V et Zn)
NF A06-391:1988 STEEL AND IRON. DETERMINATION OF TOTAL CARBON CONTENT. INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE.

AENOR, elemental content of combustion

UNE 77325:2003 Soil quality. Determination of total nitrogen content by dry combustion ("elemental analysis").
UNE 77321:2003 Soil quality. Determination of organic and total carbon after dry combustion (elementary analysis).
UNE-EN 15410:2012 Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
UNE 53087-1:2002 Plastics and rubber. Determination of chlorine content. Part 1: Wickbold-combustion method.
UNE-EN 15411:2012 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
UNE-EN 723:2010 Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings

VN-TCVN, elemental content of combustion

TCVN 6642-2000 Soil quality.Determination of organic and total carbon after dry combustion (elementary analysis)
TCVN 6645-2000 Soil quality.Determination of total nitrogen content by dry combustion ("elemental analysis")
TCVN 4916-2007 Solid mineral fuels.Determination of total sulfur.High temperature combustion method
TCVN 3175-1979 Light petroleum products.Method for the determination of elemental sulphur content
TCVN 4654-2-2009 Iron ores.Determination of sulphur content.Part 2: Combustion/titration method
TCVN 5362-1991 Graphite.Method for the determination of total oxide content of rare earth elements
TCVN 4654-3-2009 Iron ores.Determination of sulphur content.Part 3: Combustion/infrared method
TCVN 4426-1987 Sandstone.Method for the determination of total rare-earth elements and thorium oxide contents
TCVN 6021-2008 Petroleum products and hydrocarbons.Determination of sulfur content.Wickbold combustion method

国家市场监督管理总局、中国国家标准化管理委员会, elemental content of combustion

GB/T 37588-2019 Carbon materials—Determination of nitrogen content—Dumas combustion method
GB/T 38423-2019 Determination of total concentration of certain elements in toys
GB/T 36791-2018 Determination of bromine in organic flame retardant—Oxygen bomb combustion-ion selective electrode method
GB/T 40111-2021 Standard test method for fluorine,chlorine and sulfur in petroleum products—Combustion-ion chromatography

RU-GOST R, elemental content of combustion

GOST R 55130-2012 Solid recovered fuels. Determination of the content of major elements
GOST R 52962-2008 Water. Methods for determination of chromium (VI) and total chromium
GOST R 54214-2010 Solid biofuels. Determination of minor elements
GOST R 54214-2015 Solid biofuels. Determination of minor elements
GOST R 54214-2015(2019) Solid biofuels. Determination of minor elements
GOST 19121-1973 Petroleum products. Determination of sulphur content by lamp method
GOST 32599.2-2013 Iron ores, concentrates, agglomerates and pellets. Determination of sulfur content. Combustion/titration c method
GOST R 54239-2010 Solid mineral fuels. Selection of methods for the determination of trace elements
GOST R 54239-2018 Solid mineral fuels. Selection of methods for the determination of trace elements
GOST R IEC 60754-1-1999 Tests of materials from cables during combustion. Determination of the amount of evolved halogen acid gas
GOST 31866-2012 Drinking water. Determination of elements content by stripping voltammetric method
GOST EN 13366-2016 Fertilizers. Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients
GOST 31870-2012 Drinking water. Determination of elements content by atomic spectrometry methods

Professional Standard - Commodity Inspection, elemental content of combustion

SN/T 3185-2012 Determination of halogen in crude oil.Oxygen bomb combustion-ion chromatography
SN/T 3128-2012 Determination of oxygen element in organic chemicals.Elemental analyzer method
SN/T 3097-2012 Determination of total nitrogen in fertelezers.Combustion
SN/T 3598-2013 Determination of sulfur content in pyrites ore.High frequency combustion with infrared absorption method
SN/T 4363-2015 Determination of Sulfur Content in Copper Concentrates High Frequency Combustion Infrared Absorption Method
SN/T 4366-2015 Determination of Sulfur Content in Gold Ore High Frequency Combustion Infrared Absorption Method
SN/T 3469.3-2013 Determination of sulfur content in import copper matte and sintered copper material.High frequency combustion with infrared absorption method
SN/T 2081-2008 Determination of impurities in alumina.Inductively coupled plasma atomic emission spectrometric method (ICP-AES) with microwave dissolution
SN/T 2792-2011 Determination of specific element migration and total lead content in coatings for imported and exported furniture
SN/T 2638.3-2012 Determination of sulfur content in manganese ores for import and export.High temperature combustion infrared absorption method

Standard Association of Australia （SAA）, elemental content of combustion

AS 1038.10.5.1:2003(R2013)
AS 1038.10.5.1:2003 Coal and coke - Analysis and testing - Coal, coke and fly-ash - Trace elements - Determination of mercury content - Tube combustion method

CZ-CSN, elemental content of combustion

CSN 65 4843-1983 Fertilizers with microelements. Testing of manganese content
CSN 65 4844-1983 Fertilizers with microelements. Testing oí molybden?m content
CSN 65 4841-1983 Fertilizers with microelements. Testing of cobalt content
CSN 65 4842-1983 Fertilizers with microelements. Testing of copper contfmt.
CSN 65 4845-1983 Fertilizers wlth microelements. Testlng of zinc content
CSN 65 4840-1983 Fertilizers with microelements. Testing of boron content
CSN ISO 9501:1992 Metallurgical-grade fluorspar - Determination of total sulfur content - Iodometric method after combustion
CSN 44 1355-1993 Solid minerál fuels. Unburnt residue. Determination of Hydrogen and Carbon
CSN 65 6077-1979 Dotermination of thc sulphur content >f petroleum proilurts by the Wickbold onibustion mothod

KR-KS, elemental content of combustion

KS I ISO 10694-2021 Soil quality — Determination of organic and total carbon after dry combustion(elementary analysis)
KS E ISO 4690-2002 Iron ores－Determination of sulfur content－Combustion method
KS M ISO 16968-2021 Solid biofuels — Determination of minor elements
KS C IEC 60754-1-2019 Test on gases evolved during combustion of materials from cables — Part 1: Determination of the halogen acid gas content
KS M ISO 1762-2020 Paper, board, pulps and cellulose nanomaterials —Determination of residue (ash content) on ignition at 525 ℃
KS D ISO 437-2021 Steel and cast iron — Determination of total carbon content —Combustion gravimetric method
KS E ISO 609-2003(2023) Solid mineral fuels－Determination of carbon and hydrogen sulfur－High temperature combustion method
KS E ISO 4689-3-2022 Iron ores ― Determination of sulfur content ― Part 3: Combustion/infrared method
KS E ISO 4689-2-2022 Iron ores ― Determination of sulfur content ― Part 2: Combustion/titration method
KS E ISO 4689-3-2017 Iron ores－Determination of sulfur content－Part 3：Combustion/infrared method
KS E ISO 4689-2-2017 Iron ores－Determination of sulfur content－Part 2：Combustion/titration method
KS M ISO 6528-1-2016 Rubber－Determination of total sulfur content－Part 1：Oxygen combustion flask method
KS D ISO 9556-2021 Steel and iron — Determination of total carbon content — Infrared absorption method after combustion in an induction furnace
KS I ISO 14869-2-2019 Soil quality — Dissolution for the determination of total element content ― Part 2: Dissolution by alkaline fusion
KS D ISO 7524-2022 Ferronickels — Determination of carbon content — Infrared absorption method after induction furnace combustion
KS D ISO 7526-2022 Ferronickels — Determination of sulfur content — Infrared absorption method after induction furnace combustion
KS D ISO 10719-2021 Cast irons — Determination of non-combined carbon content —Infrared absorption method after combustion in an induction furnace
KS G ISO 8124-5-2016 Safety of toys ─ Part 5: Determination of total concentration of certain elements in toys
KS D ISO 4883-2003(2023) Hardmetals－Determination of contents of metallic elements by X－ray fluorescence－Solution method

BE-NBN, elemental content of combustion

NBN 771-08-1969
NBN T 52-050-1988
NBN T 52-053-1977 Determination of the sulphur content of petroleum products by the Wiokbold combustion method

PT-IPQ, elemental content of combustion

NP 1291-1976
NP 1183-1976
NP 1185-1976
NP 1227-1976
NP 1351-1976
NP 1353-1976
NP 1233-1976
NP 2280-1988 Alcoholic beverages and spirits Determination of iron content by atomic absorption spectrophotometry
NP 33-1976
NP 1375-1991 Sodium hydroxide for industrial use Determina??o of calcium content. Complexometric method with EDTA
NP 1159-1976
NP 1160-1975
NP 1376-1976
NP 1234-1976
NP 1273-1976

Professional Standard - Electricity, elemental content of combustion

DL/T 568-1995 Fast test methods for ultimate analysis of fuel by infrared absorption & thermal conductivity
DL/T 1206-2013 High temperature combustion-microcoulometry testing method for chlorine content in the phosphate ester fire-resistant fluids
DL/T 1857-2018 Determination of Chlorine Content in Coal Oxygen Bomb Combustion Ion Selective Electrode Method

British Standards Institution (BSI), elemental content of combustion

BS 1016-106.4.2:1996 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of total sulfur content. High temperature combustion method
BS 1016-106.1.1:1996 Methods for analysis and testing of coal and coke. Ultimate analysis of coal and coke. Determination of carbon and hydrogen content. High temperature combustion method
BS EN IEC 60754-3:2019 Test on gases evolved during combustion of materials from cables - Measurement of low level of halogen content by ion chromatography
BS 7755-3.8:1995 Soil quality. Chemical methods. Determination of organic and total carbon after dry combustion (elementary analysis)
DD CEN/TS 15290:2006 Solid Biofuels — Determination of major elements
DD CEN/TS 15297:2006 Solid Biofuels — Determination of minor elements
BS EN ISO 16968:2015 Solid biofuels. Determination of minor elements
BS EN 14582:2007 Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods
DD CEN/TS 15410:2006 Solid recovered fuels — Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
BS ISO 4689-2:2015 Iron ores. Determination of sulfur content. Combustion/titration method
BS ISO 4689-2:2004 Iron ores - Determination of sulfur content - Combustion/titration method
BS ISO 4689-2:2017 Iron ores. Determination of sulfur content. Combustion/titration method
BS ISO 4689-3:2015 Iron ores. Determination of sulfur content. Combustion/infrared method
BS ISO 4689-3:2004 Iron ores - Determination of sulfur content - Combustion/infrared method
BS ISO 4689-3:2017 Iron ores. Determination of sulfur content. Combustion/infrared method
BS EN 15410:2011 Solid recovered fuels. Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
14/30282364 DC BS ISO 437. Steel and cast iron. Determination of total carbon content. Combustion gravimetric method
BS EN 14756:2006 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
BS EN 14756:2007 Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours
BS 7020-7.2:1988 Analysis of iron ores. Methods for the determination of sulphur content. Combustion method
BS EN 14582:2016 Tracked Changes. Characterization of waste. Halogen and sulfur content. Oxygen combustion in closed systems and determination methods
BS ISO 11438-5:1993 Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of tellurium content
BS ISO 11438-6:1993 Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of thallium content
BS ISO 11438-7:1993 Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of silver content
BS ISO 11438-8:1993 Ferronickel. Determination of trace-element content by electrothermal atomic absorption spectrometric method - Determination of indium content
BS DD CEN/TS 15410:2006 Solid recovered fuels - Method for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
BS 1428-B2:1960 Microchemical analysis - Apparatus for the determination of elements by other than combustion methods - Specification for ammonia distillation apparatus (Markham)
BS EN 1839:2017 Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
DD CEN/TS 15411:2006 Solid recovered fuels — Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
PD CEN/TS 17786-2:2022 Inorganic micronutrient fertilizers. Determination of the chelated micronutrient content and the chelated fraction of micronutrients. Determination of EDTA, DTPA, HEEDTA, IDHA or EDDS
BS EN 15411:2011 Solid recovered fuels. Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
BS EN ISO 16634-1:2008 Food products - Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content - Part 1: Oilseeds and animal feeding stuffs
BS EN ISO 7526:2020 Tracked Changes. Ferronickels. Determination of sulfur content. Infrared absorption method after induction furnace combustion
BS EN 12697-39:2020 Tracked Changes. Bituminous mixtures. Test methods. Binder content by ignition
BS ISO 8005:2006 Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content
BS PD ISO/TS 10719:2016 Cast irons. Determination of non-combined carbon content. Infrared absorption method after combustion in an induction furnace
BS 3727-12:1970 Methods for the analysis of nickel for use in electronic tubes and valves - Determination of sulphur (combustion method)
BS EN 15764:2009 Foodstuffs - Determination of trace elements - Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion
BS EN 15764:2010 Foodstuffs. Determination of trace elements. Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion
PD CEN/TS 17786-1:2022 Inorganic micronutrient fertilizers. Determination of the chelated micronutrient content and the chelated fraction of micronutrients. Treatment with a cation exchange resin
BS EN 50267-2-1:1999 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Procedures - Determination of the amount of halogen acid gas - Determination of the amount of halogen acid gas
BS ISO 16424:2012 Nuclear energy. Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements
BS 6394-2:1985 Trace elements in milk and milk products - Method for the determination of iron content (reference method)

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, elemental content of combustion

GB/T 34692-2017 Thermoplastic elastomer—Determination of halogen—Oxygen bomb combustion-ion chromatography
GB/T 5195.5-2017 Fluorspar—Determination of total sulfur content—Pipe furnace combustion iodic acid potassium titration method

International Organization for Standardization (ISO), elemental content of combustion

ISO 5755-2:1987 Sintered metal materials; Specifications; Part 2 : Sintered iron and sintered steel containing one or both of the elements carbon and copper, used for structural parts
ISO 4690:1986 Iron ores; Determination of sulfur content; Combustion method
ISO 10694:1995 Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis)
ISO 351:1984 Solid mineral fuels; Determination of total sulfur; High temperature combustion method
ISO 3110:1975 Copper alloys; Determination of aluminium as alloying element; Volumetric method
ISO 3111:1975 Copper alloys; Determination of tin as alloying element; Volumetric method
ISO 671:1982 Steel and cast iron; Determination of sulphur content; Combustion titrimetric method
ISO 609:1996 Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method
ISO 7266:1984 Copper and copper alloys; Determination of sulfur content; Combustion titrimetric method
ISO/TR 4830-3:1978 Steel — Determination of low carbon contents — Part 3: Conductimetric measurement after combustion
ISO 1762:2019 Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 525 °C
ISO 609:1975 Coal and coke; Determination of carbon and hydrogen; High temperature combustion method
ISO 7725:1991 Rubber and rubber products; determination of bromine and chlorine content; oxygen flask combustion technique
ISO 10237:1997 Carbonaceous materials for use in the production of aluminium - Calcined coke - Determination of residual-hydrogen content
ISO 4689-2:2004 Iron ores - Determination of sulfur content - Part 2: Combustion/titration method
ISO 4689-2:2015 Iron ores - Determination of sulfur content - Part 2: Combustion/titration method
ISO/TR 4830-2:1978 Steel — Determination of low carbon contents — Part 2: Titrimetric method after combustion
ISO 6528-1:1984 Rubber — Determination of total sulphur content — Part 1: Oxygen combustion flask method
ISO/TR 4830-4:1978 Steel; Determination of low carbon contents; Part IV : Coulometric method after combustion
ISO 8005:1984 Carbonaceous materials used in the production of aluminium; Green and calcined coke; Determination of ash content
ISO 4689-3:2004 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
ISO 4689-2:2017 Iron ores - Determination of sulfur content - Part 2: Combustion/titration method
ISO 4689-3:2017 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
ISO 4689-3:2015 Iron ores - Determination of sulfur content - Part 3: Combustion/infrared method
ISO 9501:1991 Metallurgical-grade fluorspar; determination of total sulfur content; iodometric method after combustion
ISO 609:1996/Cor 1:1996 Solid mineral fuels - Determination of carbon and hydrogen - High temperature combustion method
ISO/TR 4830-1:1978 Steel — Determination of low carbon contents — Part 1: Manometric (low-pressure) method after combustion
ISO 11438-6:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 6: determination of thallium content
ISO 11438-7:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 7: determination of silver content
ISO 11438-8:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 8: determination of indium content
ISO 11438-2:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 2: determination of lead content
ISO 11438-4:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 4: determination of tin content
ISO 11438-5:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 5: determination of tellurium content
ISO 11438-3:1993 Ferronickel; determination of trace-element content by electrothermal atomic absorption spectrometric method; part 3: determination of antimony content
ISO 6997:1985 Carbonaceous materials for the production of aluminium; Calcined coke; Determination of apparent oil content ; Heating method
ISO 8723:1986 Carbonaceous materials for the production of aluminium; Calcined coke; Determination of oil content; Method by solvent extraction
ISO 4935:1990 Steel and iron; determination of sulfur content; infrared absorption method after combustion in an induction furnace
ISO 7524:2020 Ferronickels — Determination of carbon content — Infrared absorption method after induction furnace combustion
ISO 7526:2020 Ferronickels — Determination of sulfur content — Infrared absorption method after induction furnace combustion
ISO 16424:2012 Nuclear energy - Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd<(Index)2>O<(Index)3> content in gadolinium fuel pellets by measurements of uranium and gadolinium elements
ISO 8005:2005 Carbonaceous materials used in the production of aluminium - Green and calcined coke - Determination of ash content
ISO/TS 10719:2016 Cast irons - Determination of non-combined carbon content - lnfrared absorption method after combustion in an induction furnace
ISO/TS 10719:1994 Cast irons - Determination of non-combined carbon content - lnfrared absorption method after combustion in an induction furnace
ISO 7527:1985 Nickel, ferronickel and nickel alloys; Determination of sulfur content; Iodimetric titration method after induction furnace combustion
ISO 15911:2000 Petroleum products - Estmation of net specific emergy of eviation turbine fuels using hydrogen content data
ISO 4260:1987 Petroleum products and hydrocarbons; Determination of sulfur content; Wickbold combustion method
ISO/TS 14425:1999 Carbonaceous materials used in the production of aluminium - Cold-ramming pastes - Determination of volatile-matter content of unbaked pastes
ISO 14869-2:2002 Soil quality - Dissolution for the determination of total element content - Part 2: Dissolution by alkaline fusion
ISO 11437-2:1994 Nickel alloys - Determination of trace-element content by electrothermal atomic absorption spectrometric method - Part 2: Determination of lead content

ZA-SANS, elemental content of combustion

SANS 5938:1980 Carbon and hydrogen contents of coal (high temperature combustion method)

YU-JUS, elemental content of combustion

JUS C.N2.004-1988 Powder metallurgy. Sintered metal materials. Sintered iron and sintered steel containing one or both of the elements carbon and copper, used for structural parts. Specifications
JUS H.F8.506-1991 Natural gas. Determinatlon of sulfur content. t/ickbold combustion method
JUS N.C0.085-1989 Test on gases evolved during combustion of electric cables. Determinstion of the amount of halogen acidgas evolved during the combustion of polvmeric materials taken from cables
JUS B.H8.316-1984 Methods of analysis of coal nad coke. Determination of total sulphur. High temperature combustion method
JUS C.A1.616-1980 Methods for chemical analvsis ofcopper and copper alloys. Votumetric determination ofcontent ofiron as alloving element
JUS C.A1.704-1987 Nickel metal, feronickel and nickel alloys. Determination of sulfur content. lodimetric titration method after induction furnace combustion

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, elemental content of combustion

GB/T 6730.17-2014 Iron ores.Determination of sulfur content.Combustion iodometric method
GB/T 5195.5-2006 Fluorspar. Determination of total sulfur content. The iodometric method after combustion
GB/T 31292-2014 Carbon fibre.Determination of carbon content.Combustion absorption method
GB/T 30647-2014 Determination of harmful elements total content of coatings
GB/T 24224-2009 Chromium ores.Determination of sulfur content.Combustion-neutralization titration method,combustion-potassium iodate titration method and combustion-infrared absorption method
GB/T 4497-1984 Vulcanized rubber--Determination of total sulphur content--Oxygen combustion flask method
GB/T 23991-2009 Determination of soluble harmful elements content of coatings
GB/T 26930.9-2014 Carbonaceous materials used in the production of aluminium.Pitch for electrodes.Part 9:Determination of sulful content by the bomb method
GB/T 5059.9-2008 Ferromolybdenum.Determination of sulfur content.The infrared absorption method and the combustion-iodate volumetric method
GB/T 4497.1-2010 Rubber.Determination of total sulfur content.Part 1:Oxygen combustion flask method
GB/T 43012-2023 Determination of sulfur element and sulfate half-ester content in pulp cellulose nanocrystals
GB/T 6730.61-2005 Iron ores-Determination of carbon and sulfur content-High frequency combustion with infrared absorption method
GB/T 12700-1990 Petroleum products and hydrocarbons--Determination of sulfur content--Wickbold combustion method
GB/T 6730.61-2022 Iron ores—Determination of carbon and sulfur content—High frequency combustion with infrared absorption method
GB/T 223.69-2008 Iron,steel and alloy.Determination of carbon contents.Gas-volumetric method after combustion in the pipe furnace
GB/T 9872-1998 Rubber and rubber products--Determination of bromine and chlorine content--Oxygen flask combustion technique
GB/T 2462-1996 Pyrites and concentrate--Determination of effective sulfur content--Combustion neutralization method
GB/T 32573-2016 Determination of total carbon content of silicon powder Infrared absorption method after combustion in induction furnace
GB/T 4701.10-2008 Ferrotitanium. Determination of sulfur content. Infrared absorption method and combustion-neutralization titration method
GB/T 7731.12-2008 Ferrotungsten. Determination of sulfur content. Infrared absorption method and combustion titration method
GB/T 8704.3-2009 Ferrovanadium.Determination of sulfur content.The infrared absorption method and the combustion-neutralization titration method
GB/T 41942-2022 Rubber, raw natural, and rubber latex, natural—Determination of nitrogen content—Micro Dumas combustion method
GB/T 21931.1-2008 Nickel,ferronickel and nickel alloys.Determination of carbon content.Infrared absorption method afer induction furnace combustion
GB/T 21931.2-2008 Nickel,ferronickel and nickel alloys.Determination of sulfur content.Infrared absorption method after induction furnace combustion
GB/T 223.85-2009 Steel and iron.Determination of sulfur content.Infrared absorption method after combustion in an induction furnace
GB/T 29652-2013 Direct reduced iron.Determination of carbon and sulfur.High frequency combustion with infrared absorption method
GB/T 30905-2014 Inorganic chemicals for industrial use.Determination of element contents.X-ray fluorescence analysis
GB/T 223.79-2007 Iron and steel-Determination of multi-element contents-X-ray fluorescence spectrometry (Routine method)
GB/T 11060.7-2011 Natural gas.Determination of sulfur compounds.Part 7: Determination of total sulfur content by Lingener combustion method

National Metrological Verification Regulations of the People's Republic of China, elemental content of combustion

JJG 2096-2017 Concentration of Element Based on Isotope Dilution Mass Spectrometry

Liaoning Provincial Standard of the People's Republic of China, elemental content of combustion

DB21/T 1320-2004 Determination of Calcium and Magnesium Content in Medium Element Fertilizer

HU-MSZT, elemental content of combustion

International Electrotechnical Commission (IEC), elemental content of combustion

IEC 60754-3:2018 Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level of halogen content by ion chromatography
IEC 60754-1:2011+AMD1:2019 CSV Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
IEC 60754-1:2011/AMD1:2019 Amendment 1 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content

ES-UNE, elemental content of combustion

UNE-EN 14582:2016 Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods
UNE-EN ISO 16968:2015 Solid biofuels - Determination of minor elements (ISO 16968:2015)
UNE-EN IEC 60754-3:2021 Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level of halogen content by ion chromatography
UNE-EN ISO 16424:2018 Nuclear energy - Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements (ISO 16424:2012)
UNE-EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020) (Endorsed by Asociación Española de Normalización in May of 2020.)

Danish Standards Foundation, elemental content of combustion

DS/EN 14582:2007 Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods
DS/EN 12938/AC:2001 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
DS/EN 12938:2001 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
DS/EN 15410:2011 Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
DS/ISO 6528/1:1984 Rubber. Determination of total sulfur content. Part 1: Oxygen combustion flask method
DS/EN 24935:1993 Steel and iron. Determination of sulfur content. Infrared absorption method after combustion in an induction furnace
DS/EN 24260:1995 Petroleum products and hydrocarbons - Determination of sulfur contents - Wickbold combustion method
DS/ISO 4935:1993 Steel and iron - Determination of sulfur content - Infrared absorption method after combustion in an induction furnace
DS/EN 15411:2011 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
DS/EN 27527:1993 Nickel, ferronickel and nickel alloys. Determination of sulfur content. Iodimetric titration method after induction furnace combustion
DS/ISO 7527:1993 Nickel, ferronickel and nickel alloys - Determination of sulfur content - Iodimetric titration method after induction furnace combustion
DS/EN 723:2009 Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings
DS/EN 10036:1989 Chemical analysis of ferrous materials. Determination of total carbon in steels and irons. Gravimetric method after combustion in a stream of oxygen

Lithuanian Standards Office , elemental content of combustion

LST EN 14582-2007 Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods
LST EN 12938-2000 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
LST EN 12938-2000/AC-2003 Methods for the analysis of pewter - Determination of alloying and impurity element contents by atomic spectrometry
LST EN 15410-2011 Solid recovered fuels - Methods for the determination of the content of major elements (Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
LST EN ISO 16968:2015 Solid biofuels - Determination of minor elements (ISO 16968:2015)
LST EN 15411-2011 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
LST EN 723-2009 Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings

CEN - European Committee for Standardization, elemental content of combustion

PD CEN/TS 15297:2006 Solid Biofuels - Determination of minor elements
PD CEN/TS 15410:2006 Solid recovered fuels - Method for the determination of the content of major elements (Al@ Ca@ Fe@ K@ Mg@ Na@ P@ Si@ Ti)
PD CEN/TS 15411:2006 Solid recovered fuels - Methods for the determination of the content of trace elements (As@ Ba@ Be@ Cd@ Co@ Cr@ Cu@ Hg@ Mo@ Mn@ Ni@ Pb@ Sb@ Se@ Tl@ V and Zn)
EN ISO 16424:2017 Nuclear energy - Evaluation of homogeneity of Gd distribution within gadolinium fuel blends and determination of Gd2O3 content in gadolinium fuel pellets by measurements of uranium and gadolinium elements

Professional Standard - Ferrous Metallurgy, elemental content of combustion

YB/T 159.5-2015 Titanium concentrate (rock minerals).Determination of sulfur content.The combustion iodometric method
YB/T 5041-2012 Molybdenum oxide.Determination of sulfur content.Combustion-potassium iodate volumetric method
YB/T 5342-2015 Ferrophosphorus.Determination of sulfur content.The combustion-neutralization titration method
YB/T 5317-2016 Calcium silicon alloy.Determination of sulfur content.High frequency combustion with infrared absorption method and the combustion-potassium iodate titration method
YB/T 190.7-2014 Continuous casting mold powder.The determination of total carbon content.The gas volumetric method after combustion and the infrared absorption method

NL-NEN, elemental content of combustion

NEN 3276-1980 Petroleum products - Determination of sulfur content - Sch?niger combustion method
NEN 2481-1989 Combustion products of solid mineral fuels -Determination of the sulfur content in powder coal ash after combustion in a furnace -Titrimetric method
NEN 2509-1991 Combustion products of solid mineral fuels - Determination of the moisture content of pulverized fuel ash and bottom-ash

RO-ASRO, elemental content of combustion

STAS SR 13209-1994 Chemical fertilizers with trace elements. Determination of zinc content
STAS 9139/9-1973 VISCOSE FIBRES AND YARNS Determination of elementary sulphur content
STAS 11359/4-1980 NATIVE SULPHUR ORES AND CONCENTRATES Determination of elementary sulphur content

Shandong Provincial Standard of the People's Republic of China, elemental content of combustion

DB37/T 2618-2014 Determination of Selenium Content in Microelement Water-Soluble Fertilizer

European Committee for Standardization (CEN), elemental content of combustion

EN 14582:2007 Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods
EN 14582:2016 Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods
EN 41:1975 Determination of the sulphur content of petroleum products by the Wickbold combustion method
EN ISO 16968:2015 Solid biofuels - Determination of minor elements (ISO 16968:2015)
EN 14756:2006 Determination of the limiting oxygen concentration (LOC) for gases and vapours
FprCEN/TS 17790-2021 Organo-mineral fertilizers - Determination of the chelated micronutrient content and the chelated fraction of micronutrients by treatment with a cation exchange resin
EN 15411:2011 Solid recovered fuels - Methods for the determination of the content of trace elements (As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb, Sb, Se, Tl, V and Zn)
EN ISO 7526:2020 Ferronickels - Determination of sulfur content - Infrared absorption method after induction furnace combustion (ISO 7526:2020)
EN 13501-1:2007+A1:2009 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN 13501-1:2018 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN 13501-1:2002 Fire Classification of Construction Products and Building Elements - Part 1: Classification Using Test Data from Reaction to Fire Tests

Group Standards of the People's Republic of China, elemental content of combustion

T/CAS 318-2018 Halogen content detection for polymers of wire and cable- Oxygen bomb-ion chromatography
T/GDASE 0009-2020 Determination of the content of carbon, hydrogen, oxygen, nitrogen and sulfur in graphene
T/CMES 08006-2020 Determination of Sulfur Content in Carburizers High Frequency Combustion Infrared Absorption Method
T/SPSTS 013-2019 Determination of the carbon, hydrogen, oxygen, nitrogen, and sulfur content of graphene powder materials— Elemental analyzer method
T/CSTM 00340-2020 Determination of the carbon, hydrogen, oxygen, nitrogen, and sulfur content of graphene powder materials— Elemental analyzer method
T/CMES 08005-2020 Determination of Carbon and Sulfur Content in Ferrochromium Nitride High Frequency Combustion Infrared Absorption Method

Japanese Industrial Standards Committee (JISC), elemental content of combustion

JIS G 1211-1:2011 Iron and steel -- Determination of carbon content -- Part 1: Combustion gravimetric method
JIS M 8404:1976 Methods for determination of rare earths in ores
JIS M 8406:1976 Method for determination of yttrium group rare earths in ores
JIS K 6233-3:1998 Rubber -- Determination of total sulfur content -- Part 3: Furnace combustion method
JIS K 6233-1:1998 Rubber -- Determination of total sulfur content -- Part 1: Oxygen combustion flask method
JIS G 1211-2:2011 Iron and steel -- Determination of carbon content -- Part 2: Gas volumetric method after combustion
JIS G 1211-3:2011 Iron and steel -- Determination of carbon content -- Part 3: Infrared absorption method after combustion

CO-ICONTEC, elemental content of combustion

ICONTEC 1708-1981

未注明发布机构, elemental content of combustion

BS 1428-B2:1960(2007) Specification for Ammonia distillation apparatus (Markham) — Microchemical apparatus — Group B : apparatus for the determination of elements by other than combustion methods
BS EN ISO 9556:2001(2009) Steel and iron — Determination oftotal carbon content — Infrared absorption method after combustion in an induction furnace

Indonesia Standards, elemental content of combustion

SNI 13-4116-1996 Determination of total carbon hydrogen content of coal by high temperature combustion method

Professional Standard - Agriculture, elemental content of combustion

GB/T 42955-2023 Determination of total nitrogen content in fertilizers Dumas combustion method
NY/T 2007-2011 Determination of the crude protein content in cereal and pules seeds by combustion according to the dumas principle

IT-UNI, elemental content of combustion

UNI EN 41-1979

Canadian Standards Association (CSA), elemental content of combustion

CAN/CSA-ISO 16968:2015 Solid biofuels - Determination of minor elements (First Edition)

SE-SIS, elemental content of combustion

SIS SS 18 71 68-1986 Coal and coke - Determination of carbon and hydrogen - High temperature combustion method
SIS SS-EN 24 935-1992 Steel and iron — Determination of sulfur content — Infrared absorption method after combustion in an induction furnace

American Society for Testing and Materials (ASTM), elemental content of combustion

ASTM UOP619-83 Fluorine in Hydrocarbons by Oxy-Hydrogen Combustion
ASTM D3682-13 Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
ASTM D3682-01(2006) Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
ASTM D3682-01e1 Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
ASTM D3682-01 Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
ASTM D3682-00 Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
ASTM D381-00 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D381-01 Standard Test Method for Gum Content in Fuels by Jet Evaporation
ASTM D6307-10 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
ASTM C816-15 Standard Test Method for Sulfur Content in Graphite by Combustion-Iodometric Titration Method

Tianjin Provincial Standard of the People's Republic of China, elemental content of combustion

DB12/T 1023-2020 Determination of total nitrogen content in organic fertilizers Dumas combustion method

IN-BIS, elemental content of combustion

IS 1448 Pt.81-1973

Henan Provincial Standard of the People's Republic of China, elemental content of combustion

DB41/T 1704-2018 Determination of total nitrogen content in compound fertilizers Dumas combustion method
DB41/T 1569-2018 Determination of Fixed Carbon Content in Graphite Ore High Frequency Combustion Infrared Absorption Method

PL-PKN, elemental content of combustion

PN H04208-03-1989 Analiza chemiczna ?elazostopów ?elazomolibden Oznaczanie zawarto?ci krzemu
PN C04005-1988 Petroleum productsDetermination of sulfur and chlorine content in petroleum products by Wickbold combustion method

国家质量监督检验检疫总局, elemental content of combustion

SN/T 4764-2017 Elemental analyzer method for determination of carbon, hydrogen, nitrogen and sulfur content in coal
SN/T 4447-2016 Determination of chlorine content in wood products Tube furnace combustion - Mercury nitrate titration method

Professional Standard - Forestry, elemental content of combustion

LY/T 1253-1999 Determination of mineral total elements(silica,iron,aluminium,titanium,manganese,calcium,magnesium,phosphorus)ignition loss in forest soil

VE-FONDONORMA, elemental content of combustion

NORVEN 22-13-1965

AT-ON, elemental content of combustion

ONORM EN 41-1983 Determination of the sulphur content of petroleum products by the Wickbold combustion method

海关总署, elemental content of combustion

SN/T 4763.2-2021 Determination of mercury content in coal Oxygen bomb combustion-atomic fluorescence spectrometry
SN/T 5250-2020 Determination of sulfur content in mineral products by high-frequency combustion infrared absorption method

Occupational Health Standard of the People's Republic of China, elemental content of combustion

GBZ/T(卫生) 200.5-2014 Reference individuals for use in radiation protection—Part 5:human body elemental composition and contents of element in main tissues and organs
GBZ/T 200.5-2014 Reference individuals for use in radiation protection.Part 5: human body elemental composition and contents of element in main tissues and organs

Professional Standard - Building Materials, elemental content of combustion

JC/T 2132-2012 Determination of doped and trace elements in barium strontium titanate (BST).Inductively coupled plasma atomic emission spectrometric method

Professional Standard - Non-ferrous Metal, elemental content of combustion

YS/T 1058-2015 Nickel, cobalt, manganese three-element composite oxide chemical analysis method Determination of sulfur content High-frequency induction furnace combustion infrared absorption method
YS/T 575.17-2007 Methods for chemical analysis of bauxite.Part 17:Determination of sulfur content.Direct combusion-iodometric method
YS/T 1600-2023 Determination of trace impurity elements in silicon carbide single crystal —Glow discharge mass spectrometry

工业和信息化部, elemental content of combustion

YB/T 5316-2016 Determination of carbon content of calcium silicon alloy by high frequency combustion infrared absorption method
YB/T 4908.5-2021 Determination of carbon and sulfur content in vanadium-aluminum alloys High-frequency induction combustion-infrared absorption method

Hebei Provincial Standard of the People's Republic of China, elemental content of combustion

DB13/T 5622-2022 Determination of Fluorine Content in Solid Biomass Fuel Oxygen Bomb Combustion-Ion Selective Electrode Method

Society of Automotive Engineers (SAE), elemental content of combustion

SAE AMS5808C-2006 Steel, Corrosion and Heat Resistant, Welding Wire 19Cr - 13Ni - 2.5Mo High Ferrite Grade, Trace Element Controlled

Professional Standard - Chemical Industry, elemental content of combustion

HG 2842-1997 Rare earths content and determination in ammonium bicarbonate-compound fertilizers(tentadtive)
HG/T 2842-1997 Content and determination of rare earth elements in ammonium bicarbonate compound fertilizer (provisional)

Sichuan Provincial Standard of the People's Republic of China, elemental content of combustion

DB51/T 2044-2015 Determination method of impurity element content in high-purity vanadium pentoxide
DB51/T 2042-2015 Determination of Carbon and Sulfur Content in Vanadium Aluminum Alloys High Frequency Induction Combustion-Infrared Absorption Method

American National Standards Institute （ANSI), elemental content of combustion

ANSI/ASTM C816:2015 Standard Test Method for Sulfur Content in Graphite by Combustion-Iodometric Titration Method

Jiangsu Provincial Standard of the People's Republic of China, elemental content of combustion

DB32/T 3595-2019 Elemental analyzer method for the determination of carbon, hydrogen, nitrogen, sulfur and oxygen content in graphene materials

Professional Standard - Medicine, elemental content of combustion

YY/T 1507.4-2016 Determination the content of impurity element in the implant for surgery ultra-high molecular weight polyethylene powder.Part 4:Determination of aluminum by ICP-MS

国家食品药品监督管理局, elemental content of combustion

YY/T 1507.3-2016 Determination of impurity elements in ultra-high molecular weight polyethylene powder for surgical implants Part 3 Determination of calcium (Ca) element content by ICP-MS
YY/T 1507.1-2016 Determination of impurity elements in ultra-high molecular weight polyethylene powder for surgical implants Part 1 Determination of titanium (Ti) element content by ICP-MS