ZH
RU
ES

Non-metallic material test

Non-metallic material test, Total:248 items.

In the international standard classification, Non-metallic material test involves: Insulating materials, Fasteners for aerospace construction, Electrical wires and cables, Materials for aerospace construction, Road vehicle systems, Protection against fire, Electricity. Magnetism. Electrical and magnetic measurements.

Association Francaise de Normalisation, Non-metallic material test

NF EN 6041:2018 Série aérospatiale - Matériaux non métalliques - Méthode d'essai - Analyse Enthalpique Différentielle (AED) des matériaux non métalliques (non polymérisés)
NF C32-011-100*NF EN 60811-100:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100 : general
NF L06-451*NF EN 3238:2011 Aerospace series - Metallic materials - Test method - Shear test for wires and rivets.
NF C32-011-402*NF EN 60811-402:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 402 : miscellaneous tests - Water absorption tests
NF C32-011-503*NF EN 60811-503:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 503 : mechanical tests - Shrinkage test for sheaths
NF EN 60811-503:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 503 : essais mécaniques - Essai de rétraction des gaines
NF C32-011-203*NF EN 60811-203:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 203 : general tests - Measurement of overall dimensions
NF EN 60811-606:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 606 : essais physiques - Méthodes de détermination de la masse volumique
NF EN 60811-601:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 601 : essais physiques - Mesure du point de goutte des matières de remplissage
NF C32-011-202*NF EN 60811-202:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202 : general tests - Measurement of thickness of non-metallic sheath
NF EN 60811-203:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 203 : essais généraux - Mesure des dimensions extérieures
NF EN 60811-603:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 603 : essais physiques - Mesure de l'indice d'acide total des matières de remplissage
NF L17-041*NF EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
NF C32-011-506*NF EN 60811-506:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 506 : mechanical tests - Impact test at low temperature for insulations and sheaths
NF C32-011-504*NF EN 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: mechanical tests - Bending tests at low temperature for insulation and sheaths
NF L06-452*NF EN 3873:2012 Aerospace series - Test methods for metallic materials - Determination of fatigue crack growth rates using Corner-Cracked (CC) test pieces.
NF C32-011-411*NF EN 60811-411:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 411 : miscellaneous tests - Low temperature brittleness of filling compounds
NF EN 60811-201:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 201 : essais généraux - Mesure de l'épaisseur des enveloppes isolantes
NF EN 60811-201/A1:2017 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 201 : essais généraux - Mesure de l'épaisseur des enveloppes isolantes
NF C32-011-508*NF EN 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508 : mechanical tests - Pressure test at high temperature for insulation and sheaths
NF C32-011-505*NF EN 60811-505:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: mechanical tests - Elongation at low temperature for insulations and sheaths
NF C32-011-401*NF EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: miscellaneous tests - Thermal ageing methods - Ageing in an air oven
NF C32-011-409*NF EN 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409 : miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
NF C32-011-412*NF EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
NF C32-011-509*NF EN 60811-509:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 509 : mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
NF C32-011-511*NF EN 60811-511:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: mechanical tests - Measurement of the melt flow index of polyethylene compounds
NF EN 60811-504:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 504 : essais mécaniques - Essais d'enroulement à basse température pour les enveloppes isolantes et les gaines
NF EN 60811-506:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 506 : essais mécaniques - Essai de choc à basse température pour les enveloppes isolantes et les gaines
NF EN 60811-505:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 505 : essais mécaniques - Essai d'allongement à basse température pour les enveloppes isolantes et les gaines
NF EN 60811-406:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 406 : essais divers - Résistance des mélanges polyéthylène et polypropylène aux craquelures
NF C32-011-501*NF EN 60811-501:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501 : mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
NF EN 60811-509/A1:2017 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 509 : essais mécaniques - Essai de résistance à la fissuration des enveloppes isolantes et des gaines (essai de choc thermique)
NF EN 60811-509:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 509 : essais mécaniques - Essai de résistance à la fissuration des enveloppes isolantes et des gaines (essai de choc thermique)
NF C32-011-408*NF EN 60811-408:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 408 : miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds
NF C32-011-407*NF EN 60811-407:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 407 : miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
NF C32-011-302*NF EN 60811-302:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: electrical tests - Measurement of the d.c. resistivity at 23 oC and 100 oC of filling compounds
NF EN 60811-511/A1:2017 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 511 : essais mécaniques - Mesure de l'indice de fluidité à chaud des mélanges polyéthylène et polypropylène
NF EN 60811-407:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 407 : essais divers - Mesure de l'augmentation de la masse des mélanges polyéthylène et polypropylène
NF C32-011-405*NF EN 60811-405:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 405 : miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths
NF EN 60811-100:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 100 : généralités
NF C32-011-510*NF EN 60811-510:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 510 : mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
NF L17-005*NF EN 2744:1992 Aerospace series. Non-metallic materials. Preferred test temperatures.
NF EN 60811-402:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 402 : essais divers - Essais d'absorption d'eau
NF EN 60811-202/A1:2017 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 202 : essais généraux - Mesure de l'épaisseur des gaines non-métalliques
NF EN 60811-202:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 202 : essais généraux - Mesure de l'épaisseur des gaines non-métalliques
NF C32-011-606*NF EN 60811-606:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 606 : physical tests - Methods for determining the density
NF C32-011-201*NF EN 60811-201:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: general tests - Measurement of insulation thickness
NF C32-011-507*NF EN 60811-507:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507 : mechanical tests - Hot set test for cross-linked materials
NF EN 60811-411:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 411 : essais divers - Fragilité à basse température des matières de remplissage
NF EN 60811-602:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 602 : essais physiques - Séparation d'huile dans les matières de remplissage
NF EN 60811-507:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 507 : essais mécaniques - Essai d'allongement à chaud pour les matériaux réticulés
NF C32-011-202/A1*NF EN 60811-202/A1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202 : general tests - Measurement of thickness of non-metallic sheath
NF C32-011-404*NF EN 60811-404:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 404 : miscellaneous tests - Mineral oil immersion tests for sheaths
NF C32-011-502*NF EN 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: mechanical tests - Shrinkage test for insulations
NF EN 60811-502:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 502 : essais mécaniques - Essai de rétraction des enveloppes isolantes
NF EN 60811-404:2012 Câbles électriques et à fibres optiques - Méthodes d'essai pour les matériaux non-métalliques - Partie 404 : essais divers - Essais de résistance à l'huile minérale pour les gaines
NF C32-011-201/A1*NF EN 60811-201/A1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201 : general tests - Measurement of insulation thickness
NF C32-011-403*NF EN 60811-403:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 403 : miscellaneous tests - Ozone resistance tests on cross-linked compounds
NF C32-011-601*NF EN 60811-601:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 601 : physical tests - Measurement of the drop-point of filling compounds
NF C32-011-602*NF EN 60811-602:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 602 : physical tests - Separation of oil in filling compounds

International Electrotechnical Commission (IEC), Non-metallic material test

IEC 60811-100:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
IEC 60811-402:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests
IEC 60811-503:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
IEC 60811-201:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
IEC 60811-203:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions
IEC 60811-606:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density
IEC 60811-201:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
IEC 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
IEC 60811-507:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials
IEC 60811-404:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths
IEC 60811-202:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
IEC 60811-202:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
IEC 60811-504:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
IEC 60811-506:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
IEC 60811-411:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds
IEC 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
IEC 60811-403:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds
IEC 60811-508:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
IEC 60811-505:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths
IEC 60811-201:2012/AMD1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness; Amendment 1
IEC 60811-601:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds
IEC 60811-602:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds
IEC 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-401:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC 60811-603:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds
IEC 60811-202:2012/AMD1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath; Amendment 1
IEC 60811-409:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
IEC 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
IEC 60811-509:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
IEC 60811-509:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
IEC 60811-511:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds
IEC 60811-301:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 C of filling compounds
IEC 60811-401:2012/AMD1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven; Amendment 1
IEC 60811-501:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
IEC 60811-511:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds
IEC 60811-604:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds
IEC 60811-408:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds
IEC 60811-607:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene
IEC 60811-405:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths
IEC 60811-302:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 C and 100 C of filling compounds
IEC 60811-406:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds
IEC 60811-605:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds
IEC 60811-410:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
IEC 60811-410:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
IEC 60811-511:2012/AMD1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds; Amendment 1
IEC 60811-410:2012/AMD1:2017 Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors; Amendment 1
IEC 60811-510:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
IEC 60811-512:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature
IEC 60811-202:2012+AMD1:2017 CSV Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
IEC 60811-201:2012+AMD1:2017 CSV Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness

British Standards Institution (BSI), Non-metallic material test

BS EN 60811-503:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Shrinkage test for sheaths
BS EN 60811-203:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of overall dimensions
BS EN 60811-504:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Bending tests at low temperature for insulation and sheaths
BS EN 60811-411:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Low-temperature brittleness of filling compounds
BS EN 60811-508:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Pressure test at high temperature for insulation and sheaths
BS EN 60811-403:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Ozone resistance test on cross-linked compounds
BS EN 60811-602:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Separation of oil in filling compounds
BS EN 60811-601:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Measurement of the drop point of filling compounds
BS EN 60811-401:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
BS EN 60811-505:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Elongation at low temperature for insulations and sheaths
BS EN 60811-506:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Impact test at low temperature for insulations and sheaths
BS EN 60811-603:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Physical tests. Measurement of total acid number of filling compounds
BS EN 60811-412:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb
BS EN 60811-402:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Water absorption tests
BS EN 60811-301:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Electrical tests. Measurement of the permittivity at 23 °C of filling compounds
BS EN 60811-409:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Loss of mass test for thermoplastic insulations and sheaths
BS EN 60811-406:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Resistance to stress cracking of polyethylene and polypropylene compounds
BS EN 60811-407:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Measurement of mass increase of polyethylene and polypropylene compounds
BS EN 60811-410:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
BS EN 60811-513:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Wrapping test after conditioning
BS EN 60811-201:2012 Electric and optical fibre cables. Test methods for non-metallic materials. General tests. Measurement of insulation thickness
BS EN 2744:1992 Non-metallic materials - Preferred test temperatures
BS EN 60811-512:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Methods specific to polyethylene and polypropylene compounds. Tensile strength and elongation at break after conditioning at elevated temperature
BS EN 60811-202:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - General tests. Measurement of thickness of non-metallic sheath
BS EN 60811-201:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - General tests. Measurement of insulation thickness
BS EN 60811-404:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Mineral oil immersion tests for sheaths
BS EN 60811-508:2012+A1:2017 Electric and optical fibre cables. Test methods for non-metallic materials - Mechanical tests. Pressure test at high temperature for insulation and sheaths
BS EN 2310:1991 Test methods for the flame resistance rating of non-metallic materials
BS EN 60811-405:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Miscellaneous tests. Thermal stability test for PVC insulations and PVC sheaths
BS EN 60811-509:2012 Electric and optical fibre cables. Test methods for non-metallic materials. Mechanical tests. Test for resistance of insulations and sheaths to cracking (heat shock test)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Non-metallic material test

TR 4386-2001 Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Test Method Standards (Edition P 1)
PREN 4386-1998 Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Test Method Standards (Edition P 1)
PREN 2744-1990 Aerospace Series Non-Metallic Materials Preferred Test Temperatures (Edition 1)

Korean Agency for Technology and Standards (KATS), Non-metallic material test

KS C IEC 60811-507:2015 Electric and optical fibre cables — Test methods for non-metallic materials — Part 507: Mechanical tests — Hot set test for cross-linked materials
KS C IEC 60811-412-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 412: Miscellaneous tests ― Thermal ageing methods ― Ageing in an air bomb
KS C IEC 60811-411-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 411: Miscellaneous tests ― Low-temperature brittleness of filling compounds
KS C IEC 60811-602-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 602: Physical tests ― Separation of oil in filling compounds
KS C IEC 60811-601-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 601: Physical tests ― Measurement of the drop point of filling compounds
KS C IEC 60811-509:2015 Electric and optical fibre cables — Test methods for non-metallic materials — Part 509: Mechanical tests — Test for resistance of insulations and sheaths to cracking (heat shock test)
KS C IEC 60811-408-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 408: Miscellaneous tests ― Long-term stability test of polyethylene and polypropylene compounds
KS C IEC 60811-407-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 407: Miscellaneous tests ― Measurement of mass increase of polyethylene and polypropylene compounds
KS C IEC 60811-302-2016(2021) Electric and optical fibre cables – Test methods for non-metallic materials –Part 302: Electrical tests – Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds
KS C IEC 60811-405-2016(2021) Electric and optical fibre cables ―Test methods for non-metallic materials ― Part 405：Miscellaneous tests ― Thermal stability test for PVC insulations and PVC sheath
KS C IEC 60811-513-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 513: Mechanical tests ― Methods specific to polyethylene and polypropylene compounds ― Wrapping test after conditioni
KS C IEC 60811-510-2016(2021) Electric and optical fibre cables ― Test methods for non-metallic materials ― Part 510: Mechanical tests ― Methods specific to polyethylene and polypropylene compounds ― Wrapping test after thermal ag
KS C IEC 60811-512-2016(2021) Electric and optical fibre cables-Test methods for non-metallic materials―Part 512：Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at
KS C IEC 60811-404-2014(2019) Electric and optical fibre cables — Test methods for non-metallic materials — Part 404: Miscellaneous tests — Mineral oil immersion tests for sheaths
KS C IEC 60811-606:2015 Electric and optical fibre cables — Test methods for non-metallic materials — Part 606: Physical tests — Methods for determining the density
KS C IEC 60811-403-2014(2019) Electric and optical fibre cables — Test methods for non-metallic materials — Part 403: Miscellaneous tests — Ozone resistance test on cross-linked compounds

Aerospace, Security and Defence Industries Association of Europe (ASD), Non-metallic material test

ASD-STAN TR 4386-2001 Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Test Method Standards
ASD-STAN PREN 4386-2001 Aerospace Series Non-Metallic Materials Rules for the Drafting and Presentation of Test Method Standards (Edition P 2; Replaced by TR 4386)
ASD-STAN PREN 2744-1990 Aerospace Series Non-Metallic Materials Preferred Test Temperatures (Edition 1)

European Committee for Standardization (CEN), Non-metallic material test

EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC)
EN 2744:1992 Non Metallic Materials - Preferred Test Temperatures

German Institute for Standardization, Non-metallic material test

DIN EN 6041:2018-03 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC); German and English version EN 6041:2018
DIN EN 6041:2018 Aerospace series - Non-metallic materials - Test method - Analysis of non-metallic materials (uncured) by Differential Scanning Calorimetry (DSC); German and English version EN 6041:2018
DIN EN 60811-100:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General (IEC 60811-100:2012); German version EN 60811-100:2012
DIN EN 60811-402:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests (IEC 60811-402:2012); German version EN 60811-402:2012
DIN EN 60811-507:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials (IEC 60811-507:2012); German version EN 60811-507:2012
DIN EN 60811-202:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath (IEC 60811-202:2012); German version EN 60811-202:2012
DIN EN 60811-201:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness (IEC 60811-201:2012); German version EN 60811-201:2012
DIN EN 60811-506:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths (IEC 60811-506:2012); German version EN 60811-506:2012
DIN EN 60811-404:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths (IEC 60811-404:2012); German version EN 60811-404:2012
DIN EN 60811-411:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds (IEC 60811-411:2012); German version EN 60811-411:2012
DIN EN 60811-508:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths (IEC 60811-508:2012); German version EN 60811-508:2012
DIN EN 60811-505:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths (IEC 60811-505:2012); German version EN 60811-505:2012
DIN EN 60811-401:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven (IEC 60811-401:2012); German version EN 60811-401:2012
DIN EN 60811-602:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds (IEC 60811-602:2012); German version EN 60811-602:2012
DIN EN 60811-412:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb (IEC 60811-412:2012); German version EN 60811-412:2012
DIN EN 60811-511:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds (IEC 60811-511:2012); German version EN 60811-511:2012
DIN EN 60811-301:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds (IEC 60811-301:2012); German version EN 60811-301:2012
DIN EN 60811-607:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene (IEC 60811-607:2012); German version EN 60811-607:2012
DIN EN 60811-405:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths (IEC 60811-405:2012); German version EN 60811-405:2012
DIN EN 60811-513:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning (IEC 60811-513:2012); German version EN 60811-513:20
DIN EN 2744:1992 Aerospace series; non-metallic materials; preferred test temperatures; german version EN 2744:1992

ES-UNE, Non-metallic material test

UNE-EN 60811-202:2012/A1:2018 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
UNE-EN 60811-201:2012/A1:2018 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness

RU-GOST R, Non-metallic material test

GOST IEC 60811-100-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 100. General
GOST IEC 60811-402-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 402. Miscellaneous tests. Water absorption tests
GOST IEC 60811-203-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 203. General tests. Measurement of overall dimensions
GOST IEC 60811-202-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 202. General tests. Measurement of thickness of non-metallic sheath
GOST IEC 60811-201-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 201. General tests. Measurement of insulation thickness
GOST IEC 60811-502-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 502. Mechanical tests. Shrinkage test for insulations
GOST IEC 60811-503-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 503. Mechanical tests. Shrinkage test for sheaths
GOST IEC 60811-507-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 507. Mechanical tests. Hot set test for cross-linked materials
GOST IEC 60811-404-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 404. Miscellaneous tests. Mineral oil immersion tests for sheaths
GOST IEC 60811-403-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 403. Miscellaneous tests. Ozone resistance test on cross-linked compounds
GOST IEC 60811-401-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 401. Miscellaneous tests. Thermal ageing methods. Ageing in an air oven
GOST IEC 60811-412-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 412. Miscellaneous tests. Thermal ageing methods. Ageing in an air bomb
GOST IEC 60811-411-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 411. Miscellaneous tests. Low-temperature brittleness of filling compounds
GOST IEC 60811-601-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 601. Physical tests. Measurement of the drop point of filling compounds
GOST IEC 60811-602-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 602. Physical tests. Separation of oil in filling compounds
GOST IEC 60811-504-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 504. Mechanical tests. Bending tests at low temperature for insulation and sheaths
GOST IEC 60811-505-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 505. Mechanical tests. Elongation tests at low temperature for insulation and sheaths
GOST IEC 60811-506-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 506. Mechanical tests. Impact test at low temperature for insulations and sheaths
GOST IEC 60811-508-2015 Electric and optical fibre cables. Test methods for non-metallic materials. Part 508. Mechanical tests. Pressure test at high temperature for insulation and sheaths

European Committee for Electrotechnical Standardization（CENELEC）, Non-metallic material test

EN 60811-100:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
EN 60811-503:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
EN 60811-402:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests
EN 60811-202:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
EN 60811-606:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density
EN 60811-507:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials
EN 60811-201:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness

Danish Standards Foundation, Non-metallic material test

DS/EN 60811-100:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
DS/EN 2744:1993 Aerospace series. Non metallic materials. Preferred test temperatures
DS/EN 60811-503:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
DS/EN 60811-402:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests
DS/EN 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
DS/EN 60811-202:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
DS/EN 60811-606:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density
DS/EN 60811-203:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions
DS/EN 60811-507:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials
DS/EN 60811-201:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness

AENOR, Non-metallic material test

UNE-EN 60811-100:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
UNE-EN 60811-402:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests
UNE-EN 60811-503:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
UNE-EN 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
UNE-EN 60811-202:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
UNE-EN 60811-606:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density
UNE-EN 60811-203:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions
UNE-EN 60811-507:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials
UNE-EN 60811-201:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness

Lithuanian Standards Office , Non-metallic material test

LST EN 2744-2001 Aerospace series - Non metallic materials - Preferred test temperatures
LST EN 60811-100-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 100: General (IEC 60811-100:2012)
LST EN 60811-402-2012 Electric and optical fibre cables - Test methods for non-metallic materials -- Part 402: Miscellaneous tests - Water absorption tests (IEC 60811-402:2012)

KR-KS, Non-metallic material test

KS C IEC 60811-402-2018(2023) Electric and optical fibre cables — Test methods for non-metallic materials — Part 402: Miscellaneous tests — Water absorption tests
KS C IEC 60811-503-2018(2023) Electric and optical fibre cables — Test methods for non-metallic materials — Part 503: Mechanical tests — Shrinkage test for sheaths

Professional Standard - Aviation, Non-metallic material test

HB 5469-2014 Burning test method for cabin interior nonmetallic material of civil aircraft
HB 5469-1991 Test methods for combustion of non-metallic materials inside civil aircraft cabins

CENELEC - European Committee for Electrotechnical Standardization, Non-metallic material test

EN 60811-502:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
EN 60811-203:2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions

Society of Automotive Engineers (SAE), Non-metallic material test

SAE J322-2014 Nonmetallic Trim Materials-Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas

SAE - SAE International, Non-metallic material test

SAE J322-1996 Nonmetallic Trim Materials-Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas
SAE J322-1967 Nonmetallic Trim Materials - Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas
SAE J322-2009 Nonmetallic Trim Materials—Test Method for Determining the Staining Resistance to Hydrogen Sulfide Gas

未注明发布机构, Non-metallic material test

BS EN 2310:1991(1999) Test methods for the flame resistance rating ofnon - metallic materials

GOSTR, Non-metallic material test

GOST IEC 60811-606-2017 Electric and optical fibre cables. Test methods for non-metallic materials. Part 606. Physical tests. Methods for determining the density

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Non-metallic material test

GB/T 7286.1-1987 Test Method for total normal emittance of metals and nonmetallic materials