ZH
RU
ES
ms nut
ms nut, Total:500 items.
In the international standard classification, ms nut involves: Fasteners, Fasteners for aerospace construction, Shipbuilding and marine structures in general, Coatings and related processes used in aerospace industry, Cutting tools, Rails and railway components, Vocabularies, Machine tools, Road vehicle systems, Screw threads, Hand-held tools, Machine tool systems, Aerospace fluid systems and components, Electrical accessories, Electronic tubes, Valves, Commercial vehicles, Pipeline components and pipelines, Electromechanical components for electronic and telecommunications equipment, Cycles, Springs, Standardization. General rules, Medical equipment, Welding, brazing and soldering.
CZ-CSN, ms nut
Aerospace Industries Association/ANSI Aerospace Standards, ms nut
- AIA/NAS NAS 488-1979 Nut -"J" Type Sheet Spring (Rev. 4)
- AIA/NAS NAS 395-1978 Nut -"U" Type Sheet Spring (Rev. 2)
- AIA/NAS NAS 396-1978 Nut -"U" Type Countersunk Sheet Spring (Rev. 2)
- AIA/NAS NAS 509-1992 Nut, Drilled Jam Rev. 6
- AIA/NAS NAS 489-1951 Nut - Latching Type (Rev. 1)
- AIA/NAS NAS 576-1978 Thread Length for Self- Locking Nuts Revision 2
- AIA/NAS NAS 487-1993 Nut-Instrument Mount (Rev. 8)
- AIA/NAS NAS 699-1981 nut, cylinder lock
- AIA/NAS NAM51474-2011 SCREW, CAP, HEX HEAD, FULLY THREADED, METRIC
- AIA/NAS NAS 445-1951 Nut - Offset Anchor Type (Rev. 2)
- AIA/NAS NAS 449-1951 Nut - Corner Anchor Type (Rev. 2)
- AIA/NAS NAS 947-1961 Cap-Protective, Beaded Tube Assembly
- AIA/NAS NAS 1195-1992 Shim - Miniature Anchor Nut (Rev. 3)
- AIA/NAS NAS 1410-1993 Nut, Universal Port Fitting (Rev. 4)
- AIA/NAS NASM316-1998 Nut, Jam, Hexagon
- AIA/NAS NASM7873-2000 Nut, Self-Locking, 1,200 Degrees Fahrenheit
- AIA/NAS NAS 3-1945 Plate - Bolt, Locking (Rev. 1) Rev 1
- AIA/NAS NAS 472-1951 Bracket - Angle Speed Nut (Rev. 1)
- AIA/NAS NAS 473-1951 Bracket - Angle Speed Nut (Rev. 1)
- AIA/NAS NAS 474-1951 Bracket - Angle Speed Nut (Rev. 1)
- AIA/NAS NAS 475-1951 Bracket - Angle Speed Nut (Rev. 1)
- AIA/NAS NAS 443-1951 Nut - Self Locking Internal Wrenching (Rev. 1)
- AIA/NAS NAS 446-1992 Nut - Flat Type Sheet Spring (Rev. 5)
- AIA/NAS NAS 946-1961 Cap - Protective, NAS 593 Nut
- AIA/NAS NAS 593-1981 Nut - Rigid Tube Connector, Aluminum (Rev. 5)
- AIA/NAS NAS 1493-1991 Locknut Bearing Retaining (Rev. 6)
- AIA/NAS NASM310-1998 Nut, Plain, Castellated, Airframe
- AIA/NAS NASM3214-1998 Nuts, Plain, Clinch-Flush
- AIA/NAS NASM14200-2003 Nut, Floating, Self Locking, Attached Retention Element (A.R.E.), 450 Degrees F, Steel, 125 KSI Ftu, Replaceable Nut Element Rev 1
- AIA/NAS NASM14201-2003 Nut, Floating, Self Locking, Attached Retention Element (A.R.E.), 450 Degrees F, Steel, 125 KSI Ftu, Replaceable Nut Element, 1/64 Oversize Rapair Rev 1
- AIA/NAS NA 0134-1981 Retainer, Nut, Floating Barrel, Metric
- AIA/NAS NAS 444-1951 Nut - Double Lug Anchor Type (Rev. 2)
- AIA/NAS NAS 240-1947 Nut - Flared Tube Coupling Plastic (Rev. 2)
- AIA/NAS NAS 1062-1962 Strip - High Temperature Terminal Block Nut Insulating (Rev. 2)
- AIA/NAS NAS 1063-1993 Strip - High Temperature Terminal Block Base Insulating (Rev. 3)
- AIA/NAS NAS 3354-1963 Fixtures - Vibration Test - Self-Locking Nuts
- AIA/NAS NASM320-2002 Nut, Plain, Castellated, Shear Rev 1
- AIA/NAS NASM315-1999 Nut, Plain, Hexagon, Airframe
- AIA/NAS NASM33737-1999 Nut, Sheet Spring, Instrument Mounting
- AIA/NAS NAS 3351-1963 Stud and Mandrel Test Fixture Self-Locking Nuts
- AIA/NAS NASM35649-2002 Nut, Plain, Hexagon, Machine Screw UNC-2B FSC 5310
- AIA/NAS NASM35650-2002 Nut, Plain, Hexagon, Machine Screw, UNF-2B
- AIA/NAS NAM51474-2015 SCREW, CAP, HEX HEAD, FULLY THREADED, METRIC (Rev 2)
- AIA/NAS NAS 1726-1992 Nut, Self-Locking, Captive Washer, Shear Type, 450 Degrees F and 800 Degrees F (Rev. 3)
- AIA/NAS NA 0184-1994 Nut Spacer, Plate-Universal, Metric
- AIA/NAS NAS 351-1961 Nut - Pilot's Control Wheel Attaching (Rev. 1)
- AIA/NAS NAS 500-1992 Nut Spacer, Plate - Countersunk (Rev. 8)
- AIA/NAS NAS 448-1950 Nut Plate - Self-Locking - Angle (Rev. 1)
- AIA/NAS NAS 450-1951 Nut Plate, Self-Locking- Plain (Rev. 2)
- AIA/NAS NAS 945-1961 Cap - Protective, NAS 591 Coupling
- AIA/NAS NAS 1794-2003 Nut - Self-Locking, Counterbore Replaceable Element Rev 2; FSC 5310
- AIA/NAS NAS 1795-2007 Retaining Clip - Replaceable Nut Plate Revision 2
- AIA/NAS NAS 3356-1991 Lubricant Coatings, Suitability of Self- Locking Nuts (Rev. 2)
- AIA/NAS NASM14493-1999 Nut, Self-Locking, Channel, Floating, Carbon Steel, 125 KSI, Ftu
- AIA/NAS NASM8984-2000 Nut, Self-Locking, Steel, 260 KSI Ftu, 450 Degrees F
- AIA/NAS NAS 1793-2001 Nut, Self-Locking, Plate - Corner, Floating, Variable Counterbore, Replaceable Nut Element 125KSA Ftu, 450 Degrees F and 800 Degrees F Revision 1; FSC 5310
- AIA/NAS NASM14210-2003 Nut, Floating, Self Locking, Attached Retention Element (A.R.E.), 450 Degrees F, Cres (A-286), 125 KSI Ftu, Replaceable Nut Element Rev 1
- AIA/NAS NAS 353-1961 Specification - Nut - Aircraft Self-Locking for 160,000 to 180,000 psi Tension Bolts (Rev. 2)
- AIA/NAS NAS 679-1974 Nut, Self-Locking, Hexagon - Low Height Revision 9
- AIA/NAS NAS 463-2000 Nut Spacer, Plate - Plain Revision 8; BEST AVAILABLE COPY
- AIA/NAS NAS 242-1947 Nut - Flared Tube Fitting Plastic Lock (Rev. 2)
- AIA/NAS NAS 596-1981 Nut - Rigid Tube Connector, Corrosion Resistant Steel (Rev. 5)
- AIA/NAS NAS 1872-1975 Nut, Torque Limiting, 900 Degrees F Application, 1/4-28 UNJF-3B Thread
- AIA/NAS NA0069-2012 SCREWS, CAP, HEXAGON SOCKET HEAD, FULL THREAD A-286, 1100 MPa, METRIC (Rev 7)
- AIA/NAS NAS 21-1981 Strip, Terminal Board Mounting Nut Insulating (Rev. 5)
- AIA/NAS NAS 447-1951 Nut Plate - Self-Locking - One Lug (Rev. 2)
- AIA/NAS NAS 1291-1991 Nut, Self-Locking, Hexagon-Low Height, Light Weight (Rev. 12)
- AIA/NAS NAS 3355-1963 Fixture - Tensile Yield Test - Self-Locking Nuts
- AIA/NAS NAS 4445-1996 Nut, Crimp, for Crimplock Fastener System (Rev. 3)
- AIA/NAS NASM14144-1999 Nut, Self-Locking, Lightweight, Castellated, 450 Degrees F FSC5310
- AIA/NAS NASM45938/1-2001 Nut, Plain, Clinch (Self-Clinching, Round) Rev 1
CU-NC, ms nut
YU-JUS, ms nut
SE-SIS, ms nut
Military Standards (MIL-STD), ms nut
- DOD A-A-53066-1987 BOTTLE, SCREW CAP
- DOD A-A-53659-1988 BOTTLE, SCREW CAP
- DOD A-A-54073-1990 BOTTLE, SCREW CAP
- DOD A-A-53828-1989 BOTTLE, SCREW CAP
- DOD A-A-54278-1990 BOTTLE, SCREW CAP
- DOD A-A-30054 D-1991 JAR, SCREW CAP, OINTMENT
- DOD A-A-51770-1986 BOTTLE, SCREW CAP, (PLASTIC)
- DOD A-A-53342-1988 BOTTLE, SCREW CAP, (PLASTIC SQUARE)
- DOD A-A-53989-1989 CAP, SCREW, BOTTLE AND JAR
- DOD A-A-53810-1989 CAP, SCREW, BOTTLE AND JAR
- DOD A-A-53871-1989 TEST TUBE (SCREW CAP, DISPOSABLE)
- DOD A-A-53559 A-1988 JAR, SCREW CAP (PATHOLOGICAL SPECIMEN) [Use In Lieu Of: DOD A-A-0053559]
Taiwan Provincial Standard of the People's Republic of China, ms nut
- CNS 4729-1984 Round Nuts
- CNS 4067-1983 Square Nuts
- CNS 4771-1979 T-Slot Nuts
- CNS 4469-1983 Castle Nuts (Crown Nuts)
- CNS 4773-1979 Rivet Nuts
- CNS 4474-1978 Knurled Nuts
- CNS 4483-1978 Screwed Inserts
- CNS 4376-1987 Bow Nuts
- CNS 4375-1987 Butterfly Nuts
- CNS 4607-1983 Studs for T-Nuts
- CNS 4465-1978 Slotted Round Nut
- CNS 4471-1983 Castle Nuts with Small Widths Across Flats
- CNS 4377-1983 Square Thin Nuts
- CNS 4434-1993 Round Nuts With Drilled Holes in One Face
- CNS 4433-1993 Round Nuts With Set Pin Hole in Side
- CNS 4432-1993 Slotted Round Nuts
- CNS 14568-2001 Steel track bolts and nuts
- CNS 4463-1978 Round Nut with Set Pin Holes Inside ISO Metric Fine Thread
- CNS 4239-1978 Marking of Bolts, Screws, Studs, and Nuts
- CNS 4240-1980 Electroplated Coating of Bolts, Screws and Nuts
- CNS 4234-1991 Screws and Nuts, Made of Stainless Steel
- CNS 6878-1981 Machine Nut Taps, for Coarse ISO Metric Threads
- CNS 4237-2000 Hot dip galvanized bolts and nuts
- CNS 5571-1996 Ships' Butterfly Nuts
- CNS 4535-1997 Terms of fasteners for nuts
- CNS 9666-2004 Fasteners－Surface discontinuities－Nuts
- CNS 4315-1983 Self-Locking Domed Cap Nuts
- CNS 4378-1983 Special Foundation Nuts
- CNS 4462-1978 Knurled Nuts, Thin Type
- CNS 4470-1983 Castle Nuts, Thin Type
- CNS 5014-1979 Hexagon Nuts 1.5 d High Metric Thread
- CNS 4373-1987 Wing Nuts (Heavy Type)
- CNS 4732-1984 Knurled Nuts with Ring
- CNS 4374-1987 Wing Nuts ( Small Type )
- CNS 4472-1983 Hexagon Cap Nuts
- CNS 5673-1980 Arbor Nuts for Milling Machines
- CNS 4430-1983 Hexagon Weld Nuts
- CNS 4431-1993 Square Weld Nuts
- CNS 3129-1998 Hexagon nuts - Thin type
- CNS 4733-1984 Hexagon Nuts with Collar
- CNS 4730-1984 Lifting Eye Nuts
- CNS 4772-1979 Hexagon and Castle Nuts with Round Thread for Motive Power Unit Turnbuckles and Drawbars
- CNS 4428-1992 Hexagon Nuts, Rounded Trapezoidal Thread
- CNS 7889-1981 Wheel Nuts for Automobiles
- CNS 14780-2003 Widening test on nuts
- CNS 4241-1978 Method of Test for Electroplated Coating of Bolts, Screws and Nuts
- CNS 14569-2001 Method of test for steel track bolts and nuts
- CNS 3130-1998 Hexagon nuts - Regular metric coarse thread
- CNS 4326-1978 Additional Form and Performance of Screws and Nuts
- CNS 4814-2000 Assembly tools for screws and nuts-Screwdrivers
- CNS 4236-2005 Hexagon nuts with large widths across flats for steel structures
- CNS 4314-2000 Self-locking hexagon nuts,thin type
- CNS 4313-2000 Self-locking hexagon nuts, heavy type
- CNS 4473-1983 Hexagon Domed Cap Nuts
- CNS 4704-1982 Mounting Bolts and Wing Nuts for Watt-hour Meters
- CNS 4585-1998 Assembly tools for screws and nuts-Nomenclature
- CNS 4429-1992 Hexagon Nuts, Rounded Trapezoidal Thread
- CNS 4238-1981 Finishes and Tolerances of Bolts, Screws, Studs, and Nuts
- CNS 4581-1978 Bolted Connections with Reduced Body Hexagon Nuts
- CNS 4582-1978 Bolted Connections with Reduced Body Cap Nuts
- CNS 4808-1979 Counterbores for Hexagon Screws and Nuts
- CNS 153-1994 Coarse Type Washers (Primarity for Hexagonal Bolts and Nuts)
- CNS 150-1994 Medium Type Washers (Primarily for Hexagonal Bolts and Nuts)
- CNS 4669-1978 Testing Standard for Nut Former
- CNS 9667-2004 Method of test for surface discontinuities － Nuts
- CNS 7974-1991 Tyre Valve Nuts for Automobiles
- CNS 4661-1984 Tommy Nuts with Movable Clamping Bolt
- CNS 5399-1980 Self-Locking Nuts
- CNS 8817-1982 Wheel Nut Wrenches for Automobiles
- CNS 4254-1978 Machine Tools Internal Tab Washers for Slotted Round Nuts for Hook Spanner
- CNS 4660-1984 Tommy Nuts with Fixed Clamping Bolt
- CNS 4731-1984 Knurled Nuts for Drawing Instruments
- CNS 4242-1978 Widths Across Flats and Widths Across Corners for Bolts, Screws and Nuts
- CNS 5001-2000 Assembly tools for screws and nuts-Driving squares for hand socket tools and power socket wrenches
- CNS 4244-1987 Hexagon Screws and Nuts-Heights of Heads and Thicknesses of Nuts
- CNS 5105-1980 Assembly Tools for Screws and Nuts-Pin Type Face Wrench
- CNS 4296-1999 Assembly tools for screws and nuts - Combination wrenches
- CNS 155-1994 Unfinished Square Washers (for Metric Bolts and Nuts)
- CNS 65-1998 Assembly tools for screws and nuts-Wrench and socket openings
- CNS 4818-2000 Assembly tools for screws and nuts-Insulated screwdrivers
- CNS 5306-2001 Assembly tools for screws and nuts-Slotted screwdriver
- CNS 4466-1978 Groove Nuts Securing by Snap Rings
- CNS 4379-1983 Thin Nuts with Small Widths Across Flats
- CNS 10303-1983 Nut, Coupling
- CNS 4230-2000 Torque-type steel hexagon locknuts
- CNS 5055-1979 Hexagon Nuts 1.5 d High with Collar Metric Thread
- CNS 3128-1998 Hexagon nuts - Finished and semi-finished metric coarse thread
- CNS 5097-1998 Assembly tools for screws and nuts - Hexagon socket screws keys
- CNS 5048-1979 Assembly Tools for Screws and Nuts-Wrench Male Cruciform
- CNS 5104-1980 Assembly Tools for Screws and Nuts-Face Wrench for Slotted Lock Rings
- CNS 5303-2001 Assembly tools for screws and nuts - Forms of keys for triangular socket wrenches
- CNS 79-1947 Minimum Distance Across Hexagonal Bolts
- CNS 14781-2003 Cone proof load test on nuts
- CNS 4467-1978 Groove Nuts Securing by Locking Plates
- CNS 3132-1983 Hexagon Nuts with Small Widths Across Flats
- CNS 4662-1984 Open Insert Nuts for Plastics Mouldings
- CNS 4229-1978 ISO Metric Screw Threads-Selected Sizes for Screws, Bolts and Nuts
- CNS 5307-2001 Assembly tools for screws and nuts-Screw driver for hexagon insert bits
- CNS 5309-2001 Assembly tools for screws and nuts - Plastic handles for screwdrivers
- CNS 14110-1998 Assembly tools for screws and nuts-Technical specifications for head operated wrenches and sockets
- CNS 4354-2005 Finishes and tolerances for product grade of screws and nuts
- CNS 13382-12-1995 Implants for Surgery - Metal Bone Screws with Hexagonal Drive Connection, Spherical Under - surface of Head ,asymmetrical Thread - Dimensions
- CNS 13382.12-1995 Implants for Surgery - Metal Bone Screws with Hexagonal Drive Connection, Spherical Under - surface of Head ,asymmetrical Thread - Dimensions
- CNS 5300-2001 Assembly tools for screws and nuts-Screwdriver bit for slotted head screws,with male hexagon drive
- CNS 5181-1980 Assembly Tools for Screws and Nuts-Square Drive Bit for Use with Spiral Ratchet Drivers
- CNS 4464-1978 Rolling Bearing Accessories, Locknuts
- CNS 5405-1980 Triangle Nuts for Non-Sparking & Explosion Gun Tools
- CNS 5098-1998 Assembly tools for screws and nuts - Hexagon socket screws keys with pilot
- CNS 5047-1979 Assembly Tools for Screws and Nuts-Screwdriver for Slotted Head Screws Double Offset
- CNS 14282-1998 Assembly tools for screws and nuts - Four-way socket wrenches
- CNS 154-1994 Large Unfinished Washers (for Metric Bolts and Nuts: M6 - M52)
- CNS 158-1994 Rectangular Lock Washers (for Metric Bolts and Nuts: M3 - M52)
- CNS 5301-2001 Assembly tools for screws and nuts - Square drive socket for hexagon insert bits
- CNS 4316-1978 Mechanical Properties of Nuts-Effective Height of Thread < 0.4 d)
- CNS 5103-1980 Assembly Tools for Screws and Nuts-Hook Wrench and Pin Wrench
- CNS 5299-2000 Assembly tools for screws and nuts-Screwdriver bit for cross recessed head screws,with male hexagon drive
- CNS 5308-2001 Assembly tools for screws and nuts-Screwdrivers for slotted screws for fine mechanics
- CNS 5010-2000 Assembly tools for screws and nuts-Hexagon insert bits for hexagon socket head screws
- CNS 4028-1999 Mechanical properties of nuts-Effective heights of thread ≧0.4d
- CNS 5003-2000 Assembly tools for screws and nuts-Hexagon drive ends for hand -and machine-operated screwdriver bits
- CNS 4948-1982 Coupling Screws with Collared Nut and Washers for Double-Ties
- CNS 5046-1979 Assembly Tools for Screws and Nuts--Screwdriver for Recessed Head Screws, Double Offset
- CNS 4208-1995 Inserted Nut Abrasive Discs and Inserted Nut Ring Wheels
- CNS 4852-1999 Assembly tools for screws and nuts - Hand torque tools
- CNS 151-1994 Semi - Finished Washers (for Hexagonal Bolts and Nuts: M1 -M20)
- CNS 12209-1988 Sets of High Strength Torque Control Bolt, Hexagon Nut and Plain Washers
- CNS 5106-1980 Assembly Tools Screws and Nuts-Adapter for Hexagon Insert Bits for Use with Spiral Ratchet Drivers
- CNS 4664-1984 Closed Insert Nuts with Dead Hole for Plastics Mouldings
HU-MSZT, ms nut
Association Francaise de Normalisation, ms nut
Professional Standard-Ships, ms nut
German Institute for Standardization, ms nut
RU-GOST R, ms nut
Korean Agency for Technology and Standards (KATS), ms nut
Defense Logistics Agency, ms nut
- DLA MS51857 NOTICE 2-2000 NUT, PUSH-ON, STEEL
- DLA MS51857 VALID NOTICE 1-1988 NUT, PUSH-ON, STEEL
- DLA MS51857-1969 NUT, PUSH-ON, STEEL
- DLA MS21268 REV A NOTICE 2-1999 SCREW, INSTRUMENT - FILLISTER HEAD
- DLA MS21268 REV A VALID NOTICE 1-1994 SCREW, INSTRUMENT - FILLISTER HEAD
- DLA MS21268 REV A-1963 SCREW, INSTRUMENT - FILLISTER HEAD
- DLA A-A-59733-2002 CAP LUBRICATION FITTING
- DLA MS51553 NOTICE 1-1997 NUT, SELF-LOCKING, WING
- DLA MS51553-1987 NUT, SELF-LOCKING, WING
- DLA MS27417 (1)-2001 CAP-PROPELLER SHAFT THREAD, SHIPPING
- DLA MS27417 NOTICE 2-1997 CAP-PROPELLER SHAFT THREAD, SHIPPING
- DLA MS27417 VALID NOTICE 1-1994 CAP-PROPELLER SHAFT THREAD, SHIPPING
- DLA MS27417-1965 CAP-PROPELLER SHAFT THREAD, SHIPPING
- DLA FF-S-86 E NOTICE 2-2002 SCREW, CAP, SOCKET-HEAD
- DLA FF-S-86 E NOTICE 1-2000 SCREW, CAP, SOCKET-HEAD
- DLA FF-S-86 E (4)-1991 SCREW, CAP, SOCKET-HEAD
- DLA FF-S-86 E-1987 SCREW, CAP, SOCKET-HEAD
- DLA MS90723 VALID NOTICE 1-1996 NUT, SHEET SPRING& J TYPE
- DLA MS90723-1963 NUT, SHEET SPRING& J TYPE
- DLA MS90724 VALID NOTICE 1-1996 NUT, SHEET SPRING& U TYPE
- DLA MS90724-1963 NUT, SHEET SPRING& U TYPE
- DLA AN502 REV 6 NOTICE 2-1998 SCREW - MACHINE, DRILLED FILLISTER HEAD, FINE THREAD
- DLA AN502 REV 6 VALID NOTICE 1-1994 SCREW - MACHINE, DRILLED FILLISTER HEAD, FINE THREAD
- DLA AN502 REV 6-1953 SCREW - MACHINE, DRILLED FILLISTER HEAD, FINE THREAD
- DLA AN503 REV 5 NOTICE 2-1997 SCREW - MACHINE, DRILLED FILLISTER HEAD, COARSE THREAD
- DLA AN503 REV 5 VALID NOTICE 1-1994 SCREW - MACHINE, DRILLED FILLISTER HEAD, COARSE THREAD
- DLA AN503 REV 5-1953 SCREW - MACHINE, DRILLED FILLISTER HEAD, COARSE THREAD
- DLA FF-S-85 D-2005 SCREW, CAP, SLOTTED AND HEXAGON HEAD
- DLA A-A-55442 VALID NOTICE 2-2007 JAR, SCREW CAP
- DLA A-A-55442 VALID NOTICE 1-2001 JAR, SCREW CAP
- DLA A-A-55442-1995 JAR, SCREW CAP
- DLA MS21264 NOTICE 2-1997 NUT DRILLED JAM
- DLA MS21264 VALID NOTICE 1-1991 NUT DRILLED JAM
- DLA MS21264-1960 NUT DRILLED JAM
- DLA MS27955 REV A NOTICE 1-2000 NUT, PLAIN-ROUND, SPANNER
- DLA MS27955 REV A (1)-1996 NUT, PLAIN-ROUND, SPANNER
- DLA MS27955 REV A-1967 NUT, PLAIN-ROUND, SPANNER
- DLA MS51858 REV B NOTICE 1-2000 NUT, PLAIN HEXAGON, PLASTIC NYLON
- DLA MS51858 REV B (1)-1996 NUT, PLAIN HEXAGON, PLASTIC NYLON
- DLA MS51858 REV B-1973 NUT, PLAIN HEXAGON, PLASTIC NYLON
- DLA MIL-DTL-45913 C-1998 NUTS, SELF-LOCKING, HEXAGON, PREVAILING TORQUE
- DLA MS14310 REV C-2009 CAPS, PIPE, BRASS OR BRONZE, THREADED, CLASS 125
- DLA MS16203 REV C NOTICE 1-2000 NUT, PLAIN, HEXAGON, AND HEXAGON JAM, UNC-2B, NONMAGNETIC
- DLA MS16203 REV C (1)-1996 NUT, PLAIN, HEXAGON, AND HEXAGON JAM, UNC-2B, NONMAGNETIC
- DLA MS16203 REV C-1969 NUT, PLAIN, HEXAGON, AND HEXAGON JAM, UNC-2B, NONMAGNETIC
- DLA MS51480 VALID NOTICE 3-2004 SCREW, CAP, SOCKET HEAD, ALLOY STEEL, UNF-3A
- DLA MS51480 NOTICE 2-1999 SCREW, CAP, SOCKET HEAD, ALLOY STEEL, UNF-3A
- DLA MS51480 VALID NOTICE 1-1996 SCREW, CAP, SOCKET HEAD, ALLOY STEEL, UNF-3A
- DLA MS51480-1984 SCREW, CAP, SOCKET HEAD, ALLOY STEEL, UNF-3A
- DLA MS51484 VALID NOTICE 3-2004 SCREW, CAP, SOCKET HEAD, ALLOY STEEL, UNC-3A
- DLA MS51484 NOTICE 2-1999 SCREW, CAP, SOCKET HEAD, ALLOY STEEL, UNC-3A
- DLA MS51484 VALID NOTICE 1-1996 SCREW, CAP, SOCKET HEAD, ALLOY STEEL, UNC-3A
- DLA MS51484-1984 SCREW, CAP, SOCKET HEAD, ALLOY STEEL, UNC-3A
- DLA MS33538 REV A NOTICE 1-1994 NUT, SHEET SPRING, LIMITATIONS FOR USAGE ON AIRCRAFT
- DLA MS33538 REV A-1958 NUT, SHEET SPRING, LIMITATIONS FOR USAGE ON AIRCRAFT
- DLA MS33784 NOTICE 2-1998 WRENCHING FEATURES FOR CYLINDRICAL NUTS, DESIGN STANDARD FOR
- DLA MS33784 VALID NOTICE 1-1991 WRENCHING FEATURES FOR CYLINDRICAL NUTS, DESIGN STANDARD FOR
- DLA MS33784-1966 WRENCHING FEATURES FOR CYLINDRICAL NUTS, DESIGN STANDARD FOR
- DLA MS51488 VALID NOTICE 3-2004 SCREW, CAP HEXAGON HEAD (FINISHED HEXAGON BOLT), ALLOY STEEL, GRADE 8
- DLA MS51488 NOTICE 2-1999 SCREW, CAP HEXAGON HEAD (FINISHED HEXAGON BOLT), ALLOY STEEL, GRADE 8
- DLA MS51488 VALID NOTICE 1-1996 SCREW, CAP HEXAGON HEAD (FINISHED HEXAGON BOLT), ALLOY STEEL, GRADE 8
- DLA MS51488-1984 SCREW, CAP HEXAGON HEAD (FINISHED HEXAGON BOLT), ALLOY STEEL, GRADE 8
- DLA MS51866 REV A NOTICE 2-2000 NUT, SELF-LOCKING, SPLINE-GENERAL PURPOSE, 250 DEG. F
- DLA MS51866 REV A (1)-1998 NUT, SELF-LOCKING, SPLINE-GENERAL PURPOSE, 250 DEG. F
- DLA MS51866 REV A VALID NOTICE 1-1988 NUT, SELF-LOCKING, SPLINE-GENERAL PURPOSE, 250 DEG. F
- DLA MS51866 REV A-1976 NUT, SELF-LOCKING, SPLINE-GENERAL PURPOSE, 250 DEG. F
- DLA MS27952 REV A NOTICE 2-2000 NUT, PLAIN-HEXAGON, JAM, LEFT HAND
- DLA MS27952 REV A VALID NOTICE 1-1988 NUT, PLAIN-HEXAGON, JAM, LEFT HAND
- DLA MS27952 REV A-1968 NUT, PLAIN-HEXAGON, JAM, LEFT HAND
- DLA MIL-DTL-52618/6 E-2012 FITTINGS, PIPE, ALUMINUM-ALLOY THREADED, 150-POUND, CAPS
- DLA A-A-55628 A-1998 NUT, PLAIN, CAP, HIGH CROWN UNC-2B AND UNF-2B
Professional Standard - Automobile, ms nut
GM North America, ms nut
Indonesia Standards, ms nut
- SNI 05-2248-1991 Bolts, screws, studs, and nuts, General requirement
- SNI 05-4058-1996 Hexagon nuts for jig and fixture
- SNI 05-1586-1989 General purpose bolts and screws, Radii under the head
- SNI 05-3070-1992 Hexagon nuts - Product grade C
- SNI 05-3067-1992 Hexagon head bolts with metric fine pitch thread - Product grade A and B
- SNI 05-2924-1992 General purpose metric screw threads - Selected size for screws, bolts and nuts
- SNI 05-3221-1992 Metric threaded crown nuts and slotted nuts, thread diameter 42 to 100 mm
- SNI 05-3216-1992 Mechanical properties of fastener, Nuts with specified proof load values, thread effective height 0, 4 d to 0, 6 d
- SNI 05-3069-1992 Hexagon nuts style 2 - Product grade A and B
- SNI 05-3068-1992 Hexagon nuts, style 1 - Product grade A and B
- SNI 05-3219-1992 Prevailing torque type steel hexagon locknut, Inches series dimensions
PL-PKN, ms nut
American National Standards Institute （ANSI), ms nut
NL-NEN, ms nut
AIA/NAS - Aerospace Industries Association of America Inc., ms nut
- NAS946-1961 Cap - Protective@ NAS 593 Nut
- NAM51474-2000 Screw@ Cap@ Hex Head@ Fully Threaded - Metric
- NAM51474-2011 SCREW@ CAP@ HEX HEAD@ FULLY THREADED@ METRIC (Rev 1)
- NAM51474-2015 SCREW@ CAP@ HEX HEAD@ FULLY THREADED@ METRIC (Rev 2)
- NASM16995-1998 Screw@ Cap@ Socket Head-Hexagon@ Corrosion Resistant Steel@ UNC-3A
- NA0069-2006 Screw@ Cap@ Hexagon Socket Head@ Full Thread A-286@ 1100 MPa@ Metric (Rev 4)
- NA0069-1996 Screw@ Cap@ Hexagon Socket Head@ Full Thread@ A-286 CRES@ 1100 MPa@ Metric (Rev 3)
- NA0274-1997 Screw@ Cap@ Socket Head@ Full Thread@ 300 Series CRES@ 500 MPa FTU@ Metric
- NASM16996-1998 Screw@ Cap@ Socket Head-Hexagon@ Corrosion Resistant Steel@ UNF-3A
- NASM90725-1999 Screw@ Cap@ Hexagon Head (Finished Hexagon Bolt)@ Steel@ Grade 5@ Cadmium Plated@ UNC-2A
- NASM90726-1999 Screw@ Cap@ Hexagon Head (Finished Hexagon Bolt)@ Steel@ Grade 5@ Cadmium Plated@ UNF-2A
- NASM24677-1998 Screw@ Cap@ Socket Head@ Hexagon@ Drilled Alloy Steel@ (UNC-3A)
- NASM24678-1998 Screw@ Cap@ Socket Head@ Hexagon@ Drilled Alloy Steel@ (UNF-3A)
Society of Automotive Engineers (SAE), ms nut
- SAE AS6342-1-1956 AS6342 Cap Nut. (Rudder Bar)
- SAE AS2224-4-1988 AS2224 Cap Nut (Rudder Bar)
- SAE AS2576-4-1946 AS2576 Jointing Washer (Screw Cap)
- SAE AS41915-3-1993 AS41915 Caps, Long, Protection, Metric Threads
- SAE AS4503-3-2015 AS4503-4505 Protection Cap for Propeller Shaft
- SAE AS4500-1-1953 AS4500-4502 Protection Cap for Propeller Shaft
- SAE AS2924-2-1947 AS2924 Bolt. M.S. - "Phillip's" Round Head
- SAE AS41914-3-1993 AS41914 Caps. Short. Protection. Metric Thread
- SAE J995-1999 Mechanical and Material Requirements for Steel Nuts
- SAE J995-2012 Mechanical and Material Requirements for Steel Nuts
- SAE J483-2006 High and Low Crown (Blind, Acorn) Hex Nuts
- SAE J483-2013 High and Low Crown (Blind, Acorn) Hex Nuts
- SAE J2295-2006 Fasteners Part Standard Cap Screws, Hex Bolts, and Hex Nuts (inch Dimensioned)
- SAE AS3261-1980 Nut, Self-Locking, Clip, Floating, AMS 7251
RO-ASRO, ms nut
- STAS 555/4-1983 Screw caps for elcctrical incandescent /amps CAPS E 14 Special technical requiremenLs for quality
- STAS 555/3-1983 Serew caps for elcctrical incandescent lamps CAPS E 10 Special technical requirements for quality
- STAS 555/5-1983 Serew caps for electrica] incandescent larnps CAPS E 27 Special technical requirements for quality
- STAS 1112/9-1979 Taps for metric thread NUT TAPS Dimensions
- STAS 555/1-1983 SCREW CAPS FOR ELECTRICAL INCANDESCENT LAMPS General technical requirements for quality
- STAS 555/2-1983 SCREW CAPS FOR ELECTR ICAL INCANDESCENT LAMPS CAPS E 5 Special technical requirements for quality
- STAS 555/6-1983 Screw caps for electrical incandescent lamps CAPS E 40 Special technical requirements for quality
- STAS 555/7-1984 Screw caps for electrical incandescent lamps CAPS K 12 Special technical requirements for quality
- STAS 10838-1988 SELF-LOCKING SCREWS HEXAGONAL HEAD SCREW Product grade A
- STAS 9247/3-1973 E 16 screw fuses SCREWED CAPS Shapes and dimensions
- STAS 486-1984 Mallkeable cast iron pipe fittings CAPS, PLUGS Dimensions
- STAS 9225-1973 Precision bolts HEXAGON SOCKET HEAD CAP SCREWS WITH REDUCED HEIGHT OF HEAD
- STAS 452/3-1984 Type D-screw fuses SCREW CAPS 6 FUSE GARRIERS Shapes and dimensions
- STAS 1112/10-1987 Taps for metric thread NUT TAPS WITH CURVED SHANK Dimensions
ES-AENOR, ms nut
SAE - SAE International, ms nut
- SAE AS173-2004 CAP@ PROPELLER SHAFT@ SHIPPING
- SAE J2295-1996 Ship Systems and Equipment - Fasteners - Part Numbers@ Standard
- SAE J2295-2016 Fasteners - Part Standard - Cap Screws@ Hex Bolts@ and Hex Nuts (Metric)
- SAE J2295-1998 Fasteners - Part Standard - Cap Screws@ Hex Bolts@ and Hex Nuts (Metric)
- SAE J2295M-2019 Fasteners - Part Standard - Cap Screws@ Hex Bolts@ and Hex Nuts (Metric)
AT-ON, ms nut
CL-INN, ms nut
Japanese Industrial Standards Committee (JISC), ms nut
Aerospace Industries Association, ms nut
U.S. Military Regulations and Norms, ms nut
- ARMY MIL-N-11151 C-1962 NUT RUNNER AND SCREWDRIVERS, ELECTRIC
- ARMY A-A-57174-1992 NUT, CAP, DUAL WHEEL MOUNTING
- ARMY MIL-C-14285 A-1961 CAN, SCREW CAP; FOR ANTI-DIM SET
- ARMY MS51865 REV A VALID NOTICE 1-1988 NUT, SELF-LOCKING, CAP-GENERAL PURPOSE, 250 DEG. F
- ARMY MS51865 REV A-1976 NUT, SELF-LOCKING, CAP-GENERAL PURPOSE, 250 DEG. F
United States Navy, ms nut
PT-IPQ, ms nut
IT-UNI, ms nut
U.S. Air Force, ms nut
GM Europe, ms nut
- GME QE 001204-1986 Elastomer f黵 K黨lerschraubdeckel Elastomer for Radiator Screw Cap German
Professional Standard - Machinery, ms nut
IN-BIS, ms nut
FI-SFS, ms nut
British Standards Institution (BSI), ms nut
CO-ICONTEC, ms nut
American Society of Mechanical Engineers (ASME), ms nut
BE-NBN, ms nut
Standard Association of Australia （SAA）, ms nut
American Society for Testing and Materials (ASTM), ms nut
- ASTM F468-03 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
- ASTM F468M-06(2012) Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
- ASTM F468-05a Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
- ASTM F468-05 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
- ASTM F468-03a Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
- ASTM F837-13e1 Standard Specification for Stainless Steel Socket Head Cap Screws
ZA-SANS, ms nut
- SANS 1700-2-22:2004 Fasteners Part 2: Screw threads Section 22: Aerospace - MJ threads - Limit dimensions for bolts and nuts
International Truck and Engine Corporation (ITEC), ms nut