ZH
RU
ES

Determination method of heat sealer

Determination method of heat sealer, Total:500 items.

In the international standard classification, Determination method of heat sealer involves: Geology. Meteorology. Hydrology, Milk and milk products, Construction equipment, Thermodynamics and temperature measurements, Measurement of volume, mass, density, viscosity, Non-destructive testing, Materials for the reinforcement of composites, Coals, Testing of metals, Road engineering, Protection of and in buildings, Sterilization and disinfection, Terminology (principles and coordination), Hydraulic energy engineering, Products of the textile industry, Plastics, Ergonomics, Linear and angular measurements, Metrology and measurement in general, Glass, Air quality, Lubricants, industrial oils and related products, Installations in buildings, Measurement of fluid flow, Analytical chemistry, Paper products, Radiation measurements, Buildings, Construction materials, Test conditions and procedures in general, Refractories, Nuclear energy engineering, Rubber and plastics products, Elements of buildings, Construction industry, Pesticides and other agrochemicals, Paint ingredients, Mechanical testing, Equipment for petroleum and natural gas industries, Electricity. Magnetism. Electrical and magnetic measurements, Leather technology, Medical equipment, Dentistry, Heat treatment, Heat recovery. Thermal insulation, Welding, brazing and soldering, Vocabularies, Road vehicle systems, Fuels, Natural gas, Ceramics, Paints and varnishes, Kitchen equipment, Textile machinery, Animal feeding stuffs, Conducting materials, Solar energy engineering, Integrated circuits. Microelectronics, Acoustics and acoustic measurements, Paper and board, Protection against fire, Electronic components in general, Domestic, commercial and industrial heating appliances, Reinforced plastics, Environmental testing, Burners. Boilers, Environmental protection, Insulating fluids, Petroleum products in general, Aircraft and space vehicles in general, Energy and heat transfer engineering in general, Tyres, Earthworks. Excavations. Foundation construction. Underground works, Seals, glands, Equipment for the metallurgical industry, Optics and optical measurements, Photography, Agricultural machines, implements and equipment, Mining and quarrying, Graphic technology, Shipbuilding and marine structures in general, Packaging and distribution of goods in general, Extraction and processing of petroleum and natural gas, Headgear. Clothing accessories. Fastening of clothing, Occupational safety. Industrial hygiene, Measurement of force, weight and pressure, Wood, sawlogs and sawn timber, Bottles. Pots. Jars, Metalliferous minerals.

Professional Standard - Water Conservancy, Determination method of heat sealer

SL 124-2014 Calibration methods for testing instrument of hydration heat of cement
SL 136-1995 Test method for adiabatic temperature rise tester
SL 136-2017 Calibration method of concrete thermal parameter tester
SL 124-1995 Method for calibration of cement hydration heat (direct method) tester
SL 113-2014 Code for calibration of photoelectric fall cone liquid limit and plastic limit device
SL 123-1995 Method for calibration of cement mortar flow tester
SL 132-1995 Method for calibration of vapor-pressure type air entrainment meter
SL 113-1995 Calibration method of photoelectric liquid-plastic limit tester
SL 144.2-2008 Calibration method of multi-parameter water quality sonde
SL 135-1995 Test method for dynamic elastic concrete modulus tester
SL 135-2017 Calibration method of concrete dynamic elastic modulus tester

水利部, Determination method of heat sealer

SL/T 124-2014 Calibration method of cement hydration heat meter
SL/T 136-2017 Calibration method of concrete thermal parameter measuring instrument
SL/T 113-2014 Calibration method of photoelectric liquid plastic limit measuring instrument
SL 123-2012 Calibration method of cement mortar fluidity tester
SL/T 135-2017 Calibration method of concrete dynamic elastic modulus measuring instrument

ZA-SANS, Determination method of heat sealer

SANS 5764:2005 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)

National Metrological Technical Specifications of the People's Republic of China, Determination method of heat sealer

JJF(航空) 040-1988 Calibration method of thermoelectric comparator
JJF(纺织) 05A-1985 Verification method of Y412A raw cotton moisture meter
JJF(纺织) 05-1985 Verification method of Y412 raw cotton moisture meter
JJF(电子) 13-1982 Calibration Method of CC-6 Small Capacitance Measuring Instrument
JJF(电子) 17-1982 Calibration method of LCD-1 large inductance measuring instrument
JJF(纺织) 02-1985 Calibration method of Y145 air-flow fiber fineness tester
JJF(电子) 24-1982 Verification method of 2K2-1 coaxial impedance measuring instrument
JJF(电子) 36-1982 Verification method of ZCL-10B radar comprehensive tester
JJF(航空) 036-1988 Verification method of pendulum weighing instrument for impact testing machine
JJF(电子) 35-1982 Verification method of HL-6 comprehensive radar tester
JJF(电子) 22-1982 Verification method of BT-3 frequency characteristic tester
JJF(电子) 34-1982 Verification method of HL-12A comprehensive radar tester
JJF(纺织) 06-1985 Verification method of Y₂-I type yarn moisture meter

European Committee for Standardization (CEN), Determination method of heat sealer

EN ISO 5764:2009 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)
EN 13880-4:2003 Hot applied joint sealants - Part 4: Test method for the determination of heat resistance; Change in penetration value
EN 993-14:1998 Methods of Test for Dense Shaped Refractory Products - Part 14: Determination of Thermal Conductivity by the Hot-Wire (Cross-Array) Method
EN 13880-1:2003 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C
EN 13880-2:2003 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 °C
EN 993-19:2004 Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differintial method
EN 13880-8:2003 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
EN 13880-9:2003 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements
EN 993-11:2007 Methods of test for dense shaped refractory products - Part 11: Determination of resistance to thermal shock
EN 13880-13:2003 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)
EN 13880-3:2003 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)
EN 13880-13:2018 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)

American Society for Testing and Materials (ASTM), Determination method of heat sealer

ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E126-92(1998) Standard Test Method for Inspection and Verification of Hydrometers
ASTM E1269-01 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-99 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
ASTM E3142-18a(2023) Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
ASTM D93-90e1 Standard Test Methods for Flash Point by Pensky-Martens Closed Tester
ASTM D93-80e1 Standard Test Methods for Flash Point By Pensky-Martens Closed Tester
ASTM C518-17 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM D5591-22 Standard Test Method for Thermal Shrinkage Force of Yarn and Cord With a Thermal Shrinkage Force Tester
ASTM D7750-23 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D7750-12(2017) Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM E1311-89(2004) Standard Test Method for Minimum Detectable Temperature Difference for Thermal Imaging Systems
ASTM D7750-12 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
ASTM D3464-96(2001) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D3464-96(2023) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM E1363-97e1 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers
ASTM F1320-01(2006) Standard Test Method for Evaluating Thermal Paper Employing a Facsimile Thermal Printer as a Test Instrument
ASTM E3367-23 Standard Test Method for Determining the Combustion Behavior of Layered Assemblies using a Cone Calorimeter
ASTM D3464-96(2014) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D6375-99a Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-05 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-09(2019) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM D6375-09(2014) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer 40;TGA41; Noack Method
ASTM E2744-16e1 Standard Test Method for Pressure Calibration of Thermal Analyzers
ASTM E2206-11 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2206-21 Standard Test Method for Force Calibration of Thermomechanical Analyzers
ASTM E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
ASTM E2113-09 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers
ASTM C1871-22 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM E476-87(2001) Standard Test Method for Thermal Instability of Confined Condensed Phase Systems (Confinement Test)
ASTM E1582-17 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
ASTM E228-95 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Vitreous Silica Dilatometer
ASTM E2550-07 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM E2550-11 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM C1871-18a Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM C1871-18 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
ASTM E2550-21 Standard Test Method for Thermal Stability by Thermogravimetry
ASTM D3835-79(1983) Standard Test Method for Rheological Properties of Thermoplastics with a Capillary Rheometer
ASTM D6073-96 Standard Test Method for Relative Setting of Heatset Printing Inks by the Sinvatrol Tester
ASTM E1068-85(2003) Standard Test Method for Testing Nonmetallic Seal Materials by Immersion in a Simulated Geothermal Test Fluid
ASTM F1921/F1921M-12(2018) Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
ASTM C518-15 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM D3795-00a Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
ASTM C1832-21 Standard Test Method for Determination of Uranium Isotopic Composition by Modified Total Evaporation (MTE) Method Using Thermal Ionization Mass Spectrometer
ASTM D5335-04 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gages
ASTM D5335-99 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gages
ASTM D5335-08 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
ASTM E2069-06(2018) Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM E2069-19 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
ASTM C1363-19 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM D56-21 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D56-21a Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D56-22 Standard Test Method for Flash Point by Tag Closed Cup Tester
ASTM D5093-90(1997) Standard Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring
ASTM D5093-15e1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM D5093-15 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
ASTM F1444-00 Standard Test Method for Determining Dynamic Thermal Response of Direct Thermal Paper-Label Printer Method
ASTM F825-93(2004) Standard Specification for Drawers, Furniture, Marine, Steel
ASTM C1832-23 Standard Test Method for Determination of Uranium Isotopic Composition by Modified Total Evaporation (MTE) Method Using Thermal Ionization Mass Spectrometer
ASTM C1832-22 Standard Test Method for Determination of Uranium Isotopic Composition by Modified Total Evaporation (MTE) Method Using Thermal Ionization Mass Spectrometer
ASTM C1832-16 Standard Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal Ionization Mass Spectrometer

RU-GOST R, Determination method of heat sealer

GOST R 56623-2015 Non-destructive testing. Methods of determination of thermal resistance of enclosing structures
GOST R ISO 5764-2011 Milk. Determination of freezing point. Thermistor cryoscope method (reference method)
GOST 8.411-1981 State system for ensuring the uniformity of measurements. Lever microme ters. Rules and procedure of verification
GOST R 54165-2010 Glass and glass products. Thermal properties determination methods. Thermal resistance determination method
GOST 25935-1983 Dosimetric instruments. Methods of measuring main parameters
GOST R 54853-2011 Bulidings and structures. Method for determination of thermal resistance and thermal coefficient of enclosing structures wiht assistance of heat flow meter
GOST 27319-1987 Thermoplastic materials. Method of determination of thermal bonding strength
GOST 33076-2014 Medical gloves. Method for determination of leak tightness
GOST 26602-1985 Windows. Methods of determination of thermal resistance
GOST 8.255-2003 State system for ensuring the uniformity of measurements. Electrical capacity measures. Verification procedure
GOST 8.255-1977 State system for ensuring the uniformity of measurements. Capasitance measures. Methods and means of calibration
GOST R ISO 13402-2008 Surgical and dental hand instruments. Determination of resistance against autoclaving, corrosion and thermal exposure. Test methods
GOST 33785-2016 Sealing materials and gaskets from them. Method for determination of resistance to liquids
GOST 18136-1972 Oils. Method for determination of oxidation stability in a universal apparatus
GOST 8.518-1984 State system for ensuring the uniformity of measurements. Ferritometers for austenite steel. Methods of verification
GOST 7875-1983 Refractory products. Method for detemination of thermal stability
GOST 33291-2015 Paint materials. Method for determination of the effect of heat
GOST R 53651-2009 Paint materials. Method for determination of the effect of heat
GOST 32091-2013 Ceramic ware. Method of thermoresistivity determinations
GOST R 53547-2009 Ceramic ware. Method of acid resistance determination
GOST R 53546-2009 Ceramic ware. Method of thermoresistivity determinatios
GOST 8.154-1975 State system for ensuring the uniformity of measurements. "Artifical ear"-type measuring instruments. Methods and means of verification
GOST EN 673-2016 Glass and glass products. Thermal properties determination methods. Thermal resistance calculation method
GOST R 54166-2010 Glass and glass products. Thermal properties determination methods. Thermal resistance calculation method
GOST 29104.14-1991 Industrial fabrics. Method for determination of heat resistance
GOST 938.28-1977 Leather. Method of determination of hygrothermic stability
GOST 7714-1975 Coals and anthracites. Method for the determination of thermal stability
GOST EN 675-2014 Glass and glass products. Thermal properties determination methods. Thermal resistance determination by heat flow meter method
GOST EN 674-2016 Glass and glass products. Thermal properties determination methods. Thermal resistance determination by guarded hot plate method
GOST 8852-1974 Petroleum products. Method of test for coking by apparatus "LKN-70"
GOST 8.493-1983 State system for ensuring the uniformity of measurements. Coaxial impedance meters. Methods and means of verification
GOST 8.114-1974 State system for ensuring the uniformity of measurements. Vertical optical length comparators. Methods an means of verification
GOST 8.212-1984 State system for ensuring the uniformity of measurements. Measures of electromotive force. Standard cells. Calibration methods and facilities
GOST 8.452-1982 State system for ensuring the uniformity of measurements. Radioisotope X-ray devices. Methods and means for verification
GOST ISO 13402-2011 Surgical and dental hand instruments. Determination of resistance against autoclaving, corrosion and thermal exposure. Test methods
GOST 7875.1-1994 Refractory products. Procedure for determination of thermal shook resistance on bricks
GOST R ISO 12156-1-2006 Diesel fuel. Determination of lubricity by the HFRR-apparatus. Part 1. Test method
GOST 32334-2013 Lubricating oils. Determination of evaporation loss of by thermogravimetric analyzer (TGA) Noack method
GOST 13903-2005 Glass containers. Methods of testing the thermal resistivity
GOST 28903-1991 Caps with ear-flaps. Method for determination of total thermal resistance
GOST R 50238-1992 Modified wood. Method for determination of heat conductivity
GOST R 50237-1992 Modified wood. Method for determination of heat capacity
GOST 13903-1993 Glass containers. Test methods for thermal resistivity

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Determination method of heat sealer

GB/T 31850-2015 Test method for thermogravimetry(TG) of no-matallic sealing materials
GB/T 22638.7-2008 Test methods for aluminium and aluminium alloy foils.Part7:Determination of heat seal strength
GB/T 12959-1991 Test method for heat of hydration of cement--The heat of solution method
GB/T 1573-2001 Determination of thermal stability of coal
GB/T 13754-1992 Test method of thermal output of heat emittor
GB/T 13754-2008 Test methods of thermal of output of heating radiators
GB/T 213-1996 Determination of calorific value of coal
GB/T 213-2003 Determination of calorific value of coal
GB/T 12959-2008 Test methods for heat of hydration of cement
GB/T 213-2008 Determination of calorific value of coal
GB/T 19136-2003 Testing method for the storage stability at elevated temperature of pesticides
GB/T 9338-1988 Method of instrumental measurement of whiteness of fluorescent whitening agents
GB/T 32266-2015 Method of performance testing for atomic fluorescence spectrometer
GB/T 9452-2003 Testing method for work zone of heat treatment furnace
GB/T 9452-2023 Test method for qualified work zone of heat treatment furnace
GB/T 9452-2012 Testing method for working zone of heat treatment furnace
GB/T 13477.13-2002 Test method for building sealants Part 13: Determination of adhesion/cohesion properties at variable temperatures
GB/T 12206-1990 Method of testing for calorific value of gas in urban areas
GB/T 14862-1993 Junction-to-case thermal resistance test methods of packages for semiconductor integrated circuits
GB/T 28860-2012 Test method for the determination of get time of encapsulating material of powdered epoxy
GB/T 3298-1991 Standard test method for thermal shock resistance of domestic ceramic ware
GB/T 2392-1980 Determination of heat stability for reactive dyes
GB/T 18204.17-2000 Methods for determination of thermal radiation in public places
GB/T 3074.4-2003 Method for the determination of the coefficient of thermal expansion of graphite electrodes
GB/T 42647-2023 On-orbit site calibration method for spaceborne laser altimeter
GB/T 32287-2015 Method of determination and calculation of heat balance for hot stove in blast furnace
GB 6053-1985 The methods for the measurement and calculation of heat balance,heat efficiency of annular kilne
GB/T 8360-1987 The lattice constant determination of metals--Method of X-ray diffractometer
GB/T 14235.9-1993 Testing method for thermal stability of pattern materials in investment casting
GB/T 31229-2014 Test method for volatility rate by thermogravimetry
GB/T 5598-2015 Test method for thermal conductivity of beryllium oxide ceramics
GB/T 3815-1983 Determination of loss in weight of montane wax
GB/T 5598-1985 Test method for thermal conductivity of beryllium oxide ceramics
GB/T 13767-1992 Textiles--Method for the determination of the ability of textiles to heat resistance
GB/T 26282-2010 Measuring methods of heat balance of cement rotary kiln
GB/T 10322.6-2004 Iron ore-Determination of decrepitation index
GB/T 12680.5-1990 Test method for the resistance to heat of alcohol soluble dyes

Professional Standard - Machinery, Determination method of heat sealer

JB/T 6298-1992 Test method of determining combustion characteristics of coal with thermal analyzer

National Metrological Verification Regulations of the People's Republic of China, Determination method of heat sealer

JJG 463-1996 Verification Regulation of Melting-Point-Measuring Instruments With Thermo-Micro-Method
JJG(烟草) 32-2023
JJG(烟草)32-2023 Verification Regulation of Cigarette Packet Seal Tester—Method of Pumping-water Immersion

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Determination method of heat sealer

GB/T 22638.7-2016 Test methods for aluminium and aluminium alloy foils－Part 7：Determination of heat seal strength
GB/T 1573-2018 Determination of thermal stability of coal
GB/T 13754-2017 Test methods of thermal output of heating radiators
GB/T 32065.6-2015 Environmental test methods for oceanographic instruments—Part 6：Damp heat, steady state

Professional Standard - Aviation, Determination method of heat sealer

HB 5367.4-1986 Determination method for thermal oxidation weight loss of carbon graphite sealing materials
HB 5367.7-1986 Method for Determination of Density of Carbon Graphite Sealing Materials
HB 5337-1986 Method for measuring radial force of lip rubber seal ring
HB 5367.3-1986 Method for determination of open porosity of carbon graphite sealing materials

British Standards Institution (BSI), Determination method of heat sealer

BS EN 13880-4:2003 Hot applied joint sealants - Test method for the determination of heat resistance - Change in penetration value
BS EN 13880-5:2004 Hot applied joint sealants - Test method for the determination of flow resistance
BS EN 13880-1:2003 Hot applied joint sealants - Test method for the determination of density at 25 °C
BS EN 13880-2:2003 Hot applied joint sealants - Test method for the determination of cone penetration at 25 °C
BS EN 13880-9:2003 Hot applied joint sealants - Test method for the determination of compatibility with asphalt pavements
BS EN ISO 4787:2011 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
BS EN 13880-3:2003 Hot applied joint sealants - Test method for the determination of penetration and recovery (resilience)
BS EN 50193:1997 Closed electrical instantaneous water heaters - Methods for measuring performance
BS EN 13880-13:2003 Hot applied joint sealants - Test method for the determination of the discontinuous extension (adherence test)
BS 7334-4:1992 Measuring instruments for building construction. Methods for determining accuracy in use of theodolites
BS EN 13880-8:2003 Hot applied joint sealants - Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
BS EN 13880-10:2003 Hot applied joint sealants - Test method for the determination of adhesion and cohesion following continuous extension and compression
BS 7603:1992 Method for determination of stresses in glass-to-glass sealings
20/30381891 DC BS ISO 21901. Thermal insulation. Test method for thermal diffusivity. Periodic heat method
BS 7334-3:1990 Measuring instruments for building construction. Methods for determining accuracy in use: optical levelling instruments
BS EN 14187-7:2019 Cold applied joint sealants - Test method for the determination of the resistance to flame
BS EN 14187-1:2003 Cold applied joint sealants - Test method for the determination of rate of cure
BS EN 14187-7:2003 Cold applied joint sealants - Test method for the determination of the resistance to flame
BS 7334-7:1992 Measuring instruments for building construction - Methods for determining accuracy in use of instruments when used for setting out
BS EN 13880-6:2019 Tracked Changes. Hot applied joint sealants. Method for the preparation of samples for testing
BS 2782-1 Method 130A:1991 Methods of testing plastics. Thermal properties. Determination of the thermal stability of polyvinyl chloride by the Congo red method
23/30467365 DC BS EN 13880-5. Hot applied joint sealants - Part 5. Test method for the determination of flow resistance
BS EN 13880-13:2018 Tracked Changes. Hot applied joint sealants. Test method for the determination of the discontinuous extension (adherence test)
BS EN 13880-8:2018 Tracked Changes. Hot applied joint sealants. Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
BS 7334-8:1992 Measuring instruments for building construction. Methods for determining accuracy in use of electronic distance-measuring instruments up to 150 m
BS 7334-5:1992 Measuring instruments for building construction. Methods for determining accuracy in use of optical plumbing instruments
BS 874:1973 Methods for determining thermal insulating properties with definitions of thermal insulating terms
BS EN 14187-2:2003 Cold applied joint sealants - Test method for the determination of tack free time
BS ISO 11527:2010 Building construction. Sealants. Test method for the determination of stringiness
22/30455543 DC BS EN 13880-3. Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)
BS IEC 61336:1996 Nuclear instrumentation. Thickness measurement systems utilizing ionizing radiation. Definitions and test methods
BS IEC 60692:1999 Nuclear instrumentation. Density gauges utilizing ionizing radiation. Definitions and test methods
DD CEN/TS 15400:2006 Solid recovered fuels — Methods for the determination of calorific value

AASHTO - American Association of State Highway and Transportation Officials, Determination method of heat sealer

T73-1989 Standard Method of Test for Flash Point by Pensky-Martens Closed Tester
TP 89-2013 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
TP 89-2010 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
T 370-2018 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester
T 370-2017 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester
T 368-2017 Standard Method of Test for Measuring Low-Temperature Flexural Creep Stiffness of Hot-Poured Asphalt Crack Sealant by Bending Beam Rheometer (BBR)
TP 126-2017 Standard Method of Test for Evaluation of the Tracking Resistance of Hot-Poured Asphalt Crack Sealant by Dynamic Shear Rheometer (DSR)
TP 126-2018 Standard Method of Test for Evaluation of the Tracking Resistance of Hot-Poured Asphalt Crack Sealant by Dynamic Shear Rheometer (DSR)
T73-1999 Standard Method of Test for Flash Point by Pensky-Martens Closed Tester (Nineteenth Edition; Revision Per Interim Specifications - Tests and Methods - 1999)

Professional Standard - Textile, Determination method of heat sealer

FZ/T 01069-1999 Measuring method of yarn diameter CCD measuring instrument method

中国轻工总会, Determination method of heat sealer

ZBW 0017-1989 Yarn diameter measurement method CCD measuring instrument method

German Institute for Standardization, Determination method of heat sealer

DIN EN 13880-4:2003-09 Hot applied joint sealants - Part 4: Test method for the determination of heat resistance; Change in penetration value; German version EN 13880-4:2003 / Note: To be replaced by DIN EN 13880-4 (2022-10).
DIN EN 13880-5:2004 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance; German version EN 13880-5:2004
DIN EN 13880-4:2003 Hot applied joint sealants - Part 4: Test method for the determination of heat resistance; Change in penetration value; German version EN 13880-4:2003
DIN EN 13880-1:2003 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C; German version EN 13880-1:2003
DIN EN 13880-2:2003 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 °C; German version EN 13880-2:2003
DIN EN ISO 5764:2009 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2009); English version of DIN EN ISO 5764:2009-10
DIN EN 13880-5:2023-07 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance; German and English version prEN 13880-5:2023 / Note: Date of issue 2023-05-26*Intended as replacement for DIN EN 13880-5 (2004-10).
DIN EN 13880-5:2004-10 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance; German version EN 13880-5:2004
DIN EN 13880-1:2003-11 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C; German version EN 13880-1:2003
DIN EN 13880-2:2003-11 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 °C; German version EN 13880-2:2003
DIN EN 13880-8:2003 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion; German version EN 13880-8:2003
DIN EN 13880-9:2003 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements; German version EN 13880-9:2003
DIN EN 13880-3:2022 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience); German and English version prEN 13880-3:2022
DIN EN 13880-8:2019-03 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion; German version EN 13880-8:2018
DIN EN 13880-13:2003 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test); German version EN 13880-13:2003
DIN EN 13880-3:2003 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience); German version EN 13880-3:2003
DIN EN 13880-3:2022-10 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience); German and English version prEN 13880-3:2022 / Note: Date of issue 2022-09-23*Intended as replacement for DIN EN 13880-3 (2003-09).
DIN EN 13880-3:2003-09 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience); German version EN 13880-3:2003 / Note: To be replaced by DIN EN 13880-3 (2022-10).
DIN 51900-1:2000-04 Testing of solid and liquid fuels - Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value - Part 1: Principles, apparatus, methods / Note: To be replaced by DIN 51900 (2022-06).
DIN EN 13880-6:2019 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
DIN EN 13880-13:2018 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)
DIN EN 13880-10:2003 Hot applied joint sealants - Part 10: Test method for the determination of adhesion and cohesion following continuous extension and compression; German version EN 13880-10:2003
DIN EN 13880-9:2003-09 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements; German version EN 13880-9:2003
DIN EN 14231:2003-07 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester; German version EN 14231:2003
DIN EN 13880-8:2019 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
DIN EN 13880-13:2018-08 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test); German version EN 13880-13:2018
DIN IEC 61336:1999-05 Nuclear instrumentation - Thickness measurement systems utilizing ionizing radiation - Definitions and test methods (IEC 61336:1996)
DIN EN 13880-6:2019-06 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing; German version EN 13880-6:2019

Professional Standard - Medicine, Determination method of heat sealer

YY/T 1432-2016 Test method for determination of heatsealability of flexible webs of medical devices as measured by seal strength

The American Road & Transportation Builders Association, Determination method of heat sealer

AASHTO TP 89-2010 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO TP 89-2013 Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO TP 85-2010 Standard Method of Test for Apparent Viscosity of Hot-Poured Bituminous Crack Sealant Using Brookfield Rotational Viscometer RV Series Instrument

Hunan Provincial Standard of the People's Republic of China, Determination method of heat sealer

DB43/T 2129-2021 Test method for trace carbon residual detector

Military Standard of the People's Republic of China-General Armament Department, Determination method of heat sealer

GJB 570.13-1988 Meteorological instrument final test method cloud meter
GJB 772.309-1993 Test Methods for Explosives Specific Heat Capacity Determination Microcaloric Calorimetry
GJB 337-1987 Determination method of nitrogen content of nitrocellulose (interferometer method)
GJB 8684.20-2015 Pyrotechnic performance test methods Part 20: Determination of infrared shielding time Infrared thermal imaging camera method
GJB 772.303-1990 Test methods for explosives - Determination of heat of explosion
GJB 737.8-1993 Test methods for pyrotechnics. Determination of specific heat capacity. Microcalorimetric method.
GJB 737.5-1993 Test methods for pyrotechnics agents - Determination of heat of explosion and combustion - Adiabatic calorimeter method

Danish Standards Foundation, Determination method of heat sealer

DS/EN 27726:1994 Thermal environments-Instruments and methods for measuring physical quantities
DS/EN 13880-5:2005 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
DS/EN 13880-4:2003 Hot applied joint sealants - Part 4: Test method for the determination of heat resistance - Change in penetration value
DS/EN 13880-1:2004 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C
DS/EN 13880-2:2004 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25 °C
DS/EN 13880-3:2003 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)
DS/EN 13880-9:2003 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements
DS/EN 13880-6:2004 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing
DS/EN 13880-13:2004 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)
DS/EN 13880-8:2004 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
DS/ISO 3148:1976 Radiators, convectors and similar appliances. Determination of thermal output. Test method using air-cooled closed booth
DS/ISO 3149:1976 Radiators, convectors and similar appliances. Determination of thermal output. Test method using liquid-cooled closed booth

CZ-CSN, Determination method of heat sealer

CSN ISO 7726:1993 Thermal environments. Instruments and methods for measuring physical quantities
CSN 66 8102 Cast.5-1997
CSN 73 0545-1970 Teating of thermal resistance of building elements by stationary heat f low method
CSN 70 0536-1982 Glass products Method for determination of thermal endurance

Association Francaise de Normalisation, Determination method of heat sealer

NF P98-880-5*NF EN 13880-5:2005 Hot applied joint sealants - Part 5 : test method for the determination of flow resistance
NF P98-880-4*NF EN 13880-4:2003 Hot applied joint sealants - Part 4 : test method for the determination of heat resistance - Change in penetration value
NF X35-202:1994 Thermal environments. Instruments and methods for measuring physical quantities.
NF C73-193:2014 Closed electrical instantaneous water heaters - Methods for measuring performance
NF EN 13880-4:2003 Produits de scellement de joints appliqués à chaud - Partie 4 : Méthode d'essai pour la détermination de la résistance à la chaleur - Variation de la pénétrabilité
NF EN 13880-1:2004 Produits de scellement de joints appliqués à chaud - Partie 1 : méthode d'essai pour la détermination de la masse volumique à 25 oC
NF EN 13880-5:2005 Produits de scellement de joints appliqués à chaud - Partie 5 : méthode d'essai pour la détermination de la résistance au fluage
NF ISO 21901:2021 Isolation thermique - Méthode d'essai pour la diffusivité thermique - Méthode de chauffage périodique.
NF EN 13880-2:2004 Produits de scellement de joints appliqués à chaud - Partie 2 : méthode d'essai pour la détermination de la pénétration au cône à 25 oC
NF P98-880-10:2004 Hot applied joint sealants - Part 10 : Test method for the determination of adhesion and cohesion following continuous extension and compression.
NF EN 13880-3:2003 Produits de scellement de joints appliqués à chaud - Partie 3 : méthode d'essai pour la détermination de la pénétrabilité et du retour élastique
NF P98-880-9*NF EN 13880-9:2003 Hot applied joint sealants - Part 9 : test method for the determination of compatibility with asphalt pavements
NF P98-880-1*NF EN 13880-1:2004 Hot applied joint sealants - Part 1 : test method for the determination of density at 25o C
NF X10-025:1991 Isolation thermique - Détermination de la résistance thermique et de la conductivité thermique en régime stationnaire - Méthode fluxmétrique
NF EN IEC 60695-2-10:2021 Essais relatifs aux risques du feu - Partie 2-10 : essais au fil incandescent/chauffant - Appareillage et méthode commune d'essai
NF P98-880-13:2004 Hot applied joint sealants - Part 13 : test method for the determination of the discontinuous extension (adherence test).
NF P98-880-2*NF EN 13880-2:2004 Hot applied joint sealants - Part 2 : test method for the determination of cone penetration at 25o C
NF EN 13880-9:2003 Produits de scellement de joints appliqués à chaud - Partie 9 : méthode d'essai pour la détermination de la compatibilité avec les revêtements bitumineux
NF EN 13880-6:2019 Produits de scellement de joints appliqués à chaud - Partie 6 : méthode d'essai pour la préparation des échantillons destinés à l'essai
NF P98-880-6*NF EN 13880-6:2019 Hot applied joint sealants - Part 6 : method for the preparation of samples for testing
NF P98-880-13*NF EN 13880-13:2018 Hot applied joint sealants - Part 13 : Test method for the determination of the discontinuous extension (adherence test)
NF P98-880-8:2004 Hot applied joint sealants - Part 8 : test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion.
NF P85-523:2011 Building construction - Sealants - Test method for the determination of stringiness.
NF P98-880-3*NF EN 13880-3:2003 Hot applied joint sealants - Part 3 : test method for the determination of penetration and recovery (resilience)
NF EN 13880-13:2018 Produits de scellement de joints appliqués à chaud - Partie 13 : Méthode d'essai pour la détermination de la traction discontinue (essai d'adhérence)
NF B35-309:2011 Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use.
NF B10-636*NF EN 14231:2003 Natural stone test methods - Determination of the slip resistance by means of the pendulum tester.

AENOR, Determination method of heat sealer

UNE 32105:1995 SOLID MINERAL FUELS. DETERMINATION OF GROSS CALORIFIC VALUE BY THE CALORIMETER BOMB METHOD.
UNE-EN 13880-5:2006 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
UNE-EN 13880-1:2004 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C
UNE-EN 13880-2:2004 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25°C
UNE-EN 13880-3:2004 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)
UNE-EN 13880-9:2004 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements
UNE-EN 13880-6:2006 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing
UNE-EN 13880-13:2004 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)
UNE-EN 13880-8:2004 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
UNE-EN 13880-4:2004 Hot applied joint sealants - Part 4: Test method for the determination of head resistance - Change in penetration value
UNE 104281-5-10:1987 BITUMINOUS AND BITUMINOUS MODIFIED MATERIALS. PAINTING AND ADHESIVES. TESTING METHODS. FLASH POINT. TAG CLOSED TESTER

Professional Standard - Military and Civilian Products, Determination method of heat sealer

WJ 2261-1994 Verification rules for thermal conductivity and infrared absorption nitrogen and oxygen detectors

RO-ASRO, Determination method of heat sealer

STAS SR EN 27726-1996 Thermal environments - Instruments and methods for measuring physical quantities
STAS 7622-1966
STAS 5924/6-1990 Winding wires METHODS OF TEST Thermal properties determination

International Organization for Standardization (ISO), Determination method of heat sealer

ISO 7726:1985 Thermal environments — Instruments and methods for measuring physical quantities
ISO 11527:2010 Building construction - Sealants - Test method for the determination of stringiness
ISO 14807:2001 Photography - Transmission and reflection densitometers - Method for determining performance
ISO 24365:2022 Radiators and convectors — Methods and rating for determining the heat output

Group Standards of the People's Republic of China, Determination method of heat sealer

T/CMA 031-2021 Calibration method for basic nitrogen meters
T/CMA 034-2021 Calibration method for salt content meters analyzers
T/HBJLXH 003-2023 Calibration method for asphalt wax content tester
T/HBJLXH 003-2022 Calibration Method of Free calcium oxide analyzer
T/CMA 033-2021 Calibration method for distillation range testers of petroleum products
T/HBJLXH 002-2022 Calibration Method of Geotextile water permeability tester
T/CMA 032-2021 Calibration method for automatic benzene crystal point testers
T/GDCKCJH 043-2021 Performance requirements and test methods of mercury diffusion hydrogen tester
T/CCAS 017-2021 Test method for heat of hydration of cement （Isothermal conduction calorimetry）
T/CSTM 00335-2022 Determination method of brake rotor thermal cracking for vehicles
T/GDES 22-2018 Determining method of thermal efficiency for dyeing machine
T/CBFIA 02001-2020 Determination of thermostability of phytase
T/CMA HG109-2023 Calibration Method for On-line Dissolved Oxygen Analyzer
T/CMA HG019-2020 Method for Measuring Friction Coefficient of Tire Test Pavement--Pendulum Measuring Method
T/NAIA 0138-2022 Determination method of calorific value of light liquid fuel oil (oxygen bomb calorimetry)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Determination method of heat sealer

PREN 3101-1990 Aerospace Series Test Methods for Sealants Determination of Resistance to Thermal Rupture

Standard Association of Australia （SAA）, Determination method of heat sealer

AS/NZS 3580.12.1:2001 Methods for sampling and analysis of ambient air - Determination of light scattering - Integrating nephelometer method

American National Standards Institute （ANSI), Determination method of heat sealer

ANSI/ASTM D6375:2009 Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) (Noack Method)
ANSI/ASTM D3795:2000 Test Method for Thermal Flow and Cure Properties of Thermosetting Plastics by Torque Rheometer (15.04)
ANSI/ASHRAE 193P-2010 Method of Test for Determining the Airtightness of HVAC Equipment
ANSI/ASTM D4591:2001 Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry

European Committee for Electrotechnical Standardization（CENELEC）, Determination method of heat sealer

EN 50193:1997 Closed Electrical Instantaneous Water Heaters; Methods for Measuring Performance (Remains Current)

Professional Standard - Petroleum, Determination method of heat sealer

SY/T 7517-1994 Determination method of crude oil specific heat capacity adiabatic calorimetry
SY/T 6816-2010 Calibration method of equipment for measuring sand content in drilling fluids
SY 6816-2010 Calibration Method of Drilling Fluid Sand Content Meter
SY 6677-2007 Calibration Method of Drilling Fluid Solid Phase Quantity Meter
SY/T 7517-2010 Determination for heat capacity of crude oil
SY 7517-2010 Determination method of specific heat capacity of crude oil
SY/T 7081-2016 Calibrating method for calibration device of geophone tester
SY/T 6810-2010 The calibration method of measuring instruments of core gas
SY/T 6677-2007 Calibration method of drilling fluid retort assembly
SY 7081-2016 Calibration method of calibration device of geophone tester
SY 6810-2010 Calibration method of rock gas permeability tester
SY/T 6107-2010 Test method of reservoir thermophysical parameters

Lithuanian Standards Office , Determination method of heat sealer

LST EN 13880-5-2004 Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
LST EN 13880-4-2004 Hot applied joint sealants - Part 4: Test method for the determination of heat resistance - Change in penetration value
LST EN 13880-1-2004 Hot applied joint sealants - Part 1: Test method for the determination of density at 25 °C
LST EN 13880-2-2004 Hot applied joint sealants - Part 2: Test method for the determination of cone penetration at 25°C
LST EN 13880-3-2004 Hot applied joint sealants - Part 3: Test method for the determination of penetration and recovery (resilience)
LST EN 13880-9-2004 Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements
LST EN 13880-6-2004 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing
LST EN 13880-13-2004 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)
LST EN 13880-8-2004 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion

Japanese Industrial Standards Committee (JISC), Determination method of heat sealer

JIS A 1316:2022 Test method using cone calorimeter measuring heat release rate and smoke production rate for building materials
JIS Z 4511:1991 Methods of calibration for exposure meters and dose-equivalent meters
JIS K 0971:1989 Calibration methods for micro-volumetric apparatus
JIS B 7440:1987 Test code for accuracy of coordinate measuring machines
JIS A 1420:1999 Determination of steady-state thermal transmission properties -- Hot box method
JIS R 2618:1995 Testing method for thermal conductivity of insulating fire bricks by hot wire
JIS P 8143:2009 Paper -- Determination of stiffness -- Clark stiffness tester method
JIS A 1412:1994 Test methods for thermal transmission properties of thermal insulations
JIS P 8114:1994 Testing method for folding endurance of paper and paperboard by schopper tester

Taiwan Provincial Standard of the People's Republic of China, Determination method of heat sealer

CNS 8516-1982 Method of Test for Flow Rates of Thermoplastics by Extrusion Plastometer

Korean Agency for Technology and Standards (KATS), Determination method of heat sealer

KS H ISO 5764-2006(2016) Milk－Determination of freezing point－Thermistor cryoscope method
KS M 2734-2013 Testing method of colour of fats and oils by means of loviboned tintometer
KS M 6898-2016 Testing method for set in lasting with the dome plasticity apparatus
KS L 3121-2010 Testing method for thermal conductivity of insulating firebrick
KS L 3121-2015 Testing method for thermal conductivity of insulating refractory bricks
KS F 2823-2006 Method of testing to determine the thermal properties of insulated heating tubes (hot water circulation procedure)
KS E 3609-1992 Determination of moisture in natural gas
KS L 1202-2009 Thermal conductivity of whiteware ceramics
KS B ISO 3149-2005(2010) Radiators, convectors and similar appliances－Determination of thermal output－Test method using liquid-cooled closed booth
KS B 0537-2005 Methods for assessing the electrical characteristics ofultrasonic testing instrument using pulse echo technique
KS L 5106-1995 Testing method for fineness of portland cement by air permeability apparatus
KS B ISO 3149:2005 Radiators, convectors and similar appliances-Determination of thermal output-Test method using liquid-cooled closed booth
KS L 9016-2010 Test methods for thermal transmission properties of thermal insulations
KS A 0521-2003 Measuring methods of low pressures by thermal conductivity gauge
KS D 8505-1996 Method for measuring the heat of hydriding reaction of hydrogen absorbing alloys
KS F 2608-2011(2016) Measuring method of linear thermal expansion for building materials
KS A 0521-1982 Measuring methods of low pressures by thermal conductivity gauge

VN-TCVN, Determination method of heat sealer

TCVN 5241-1990 Sewing thread.Method for determination of diameter on thickness tester
TCVN 4298-1986 Natural gases.Method for the determination of calorific power

海关总署, Determination method of heat sealer

SN/T 5240-2020 Cone calorimeter method for determination of heat release rate of imported and exported textiles

International Federation of Trucks and Engines, Determination method of heat sealer

NAVISTAR CEMS DT-7-2009 VOID - Method for Determining Hardness of Seal Materials

国家市场监督管理总局、中国国家标准化管理委员会, Determination method of heat sealer

GB/T 37991-2019 Measuring method for ultra-thin glass reheating line shrinkage—Dilatometer method
GB/T 19136-2021 Testing method of the accelerated storage stability at elevated temperature for pesticides
GB/T 13477.13-2019 Test method for building sealants－Part 13：Determination of adhesion/cohesion properties at variable temperatures
GB/T 8722-2019 Test method for thermal conductivity of carbon materials
GB/T 26282-2021 Measuring methods of heat balance of cement rotary kiln

American Gear Manufacturers Association, Determination method of heat sealer

AGMA 96FTM9-1996 Development of a Practical Thermal Rating Method for Enclosed Gear Drives

AT-ON, Determination method of heat sealer

ONORM EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)

Society of Automotive Engineers (SAE), Determination method of heat sealer

SAE ARP4252A-2017 Instrumental Methods of Determining Surface Cleanliness
SAE ARP4252-1995 INSTRUMENTAL METHODS OF DETERMINING SURFACE CLEANLINESS
SAE J1918-2002 Method for the Determination of Expansion and Water Absorption of Automotive Sealers

Professional Standard - Radio Television Film, Determination method of heat sealer

GY 22-1984 Verification Method of RC-1 Field Strength Meter

SAE - SAE International, Determination method of heat sealer

SAE ARP4252B-2017 Instrumental Methods of Determining Surface Cleanliness
SAE J1918-1988 Method for the Determination of Expansion and Water Absorption of Automotive Seals@ Recommended Practice (May 1988)
SAE J1918-2021 Method for the Determination of Expansion and Water Absorption of Automotive Seals@ Recommended Practice (May 1988)

BE-NBN, Determination method of heat sealer

NBN B 12-213-1975
NBN 236-1952
NBN-EN 27726-1994 Thermal environments. Instruments and methods for measuring physical quantities (ISO 7726:1985)
NBN X 10-002-1986 Specifications relating to the appliances and methods
NBN 316-1954

Aerospace, Security and Defence Industries Association of Europe (ASD), Determination method of heat sealer

ASD-STAN PREN 3101-1997 Aerospace Series Non-Metallic Materials Sealants Test Method Determination of Resistance to Thermal Rupture (Edition P 1)

AR-IRAM, Determination method of heat sealer

IRAM 8502-1954

IN-BIS, Determination method of heat sealer

Instrument Society of America (ISA), Determination method of heat sealer

ISA RP67.04.02-2010 Methodologies for the Determination of Setpoints for Nuclear Safety-Related Instrumentation

Professional Standard - Traffic, Determination method of heat sealer

JT/T 3162-1993 Testing methods for portable pendulum tester

TR-TSE, Determination method of heat sealer

TS 1092-1972 METHODS OF TEST POR BOT POURED ELASTIC TYPE?S OF CONCRETE, JOINT SEALERS

CEN - European Committee for Standardization, Determination method of heat sealer

EN 13880-8:2018 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
PREN 13880-6-2017 Hot applied joint sealants - Part 6: Method for the preperation of samples for testing
PREN 13880-8-2016 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Determination method of heat sealer

GJB 5384.20-2005 Test methods of performance for pyrotechnic composition Part 20: Determination of infrared screening time Infrared thermal imaging sets method

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Determination method of heat sealer

ASHRAE 41.9-2000 Calorimeter Test Methods for Mass Flow Measurements of Volatile Refrigerants
ASHRAE 32.1 INT 1-2011 Methods of Testing for Rating Vending Machines for Sealed Beverages
ASHRAE 93 ERTA-2013 Methods of Testing to Determine the Thermal Performance of Solar Collectors

International Electrotechnical Commission (IEC), Determination method of heat sealer

IEC 62372:2006 Nuclear instrumentation - Housed scintillators - Measurement methods of light output and intrinsic resolution

Professional Standard - Environmental Protection, Determination method of heat sealer

HJ 924-2017 Technical requirements and detection methods of COD photometric rapid detector
HJ 925-2017 Technical requirements and testing methods of portable dissolved oxygen meter

未注明发布机构, Determination method of heat sealer

BS 874:1973(1999) Methods for Determining thermal insulating properties with definitions of thermal insulating terms
BS IEC 61336:1996(1999) Nuclear instrumentation — Thickness measurement systems utilizing ionizing radiation — Definitions and test methods

Professional Standard - Coal, Determination method of heat sealer

MT/T 924-2004 Determination of thermal stability of industrial briquette
MT 394-1995 Determination method of sampling efficiency of respirable dust measuring instrument
MT/T 394-1995
MT/T 1073-2008 Determination of thermal strength of industrial briquette
MT/T 751-1997 Determination of calarific value of industrial briquette
MT/T 751-2007 Determination of calorific value of industrial briquette
MT/T 751-1991 Determination method of calorific value of industrial briquette

工业和信息化部, Determination method of heat sealer

YB/T 6048-2022 Determination method of thermal weight loss of coal pitch
JC/T 791-2019 Measurement and calculation method of heat balance and thermal efficiency of wheel kiln

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), Determination method of heat sealer

ASHRAE 93-2010 Methods of Testing to Determine the Thermal Performance of Solar Collectors
ASHRAE 93-2010 (RA 2014) Methods of Testing to Determine the Thermal Performance of Solar Collectors
ASHRAE 32.1-2010 Methods of Testing for Rating Vending Machines for Sealed Beverages
ASHRAE 93 ERTA-2014 Methods of Testing to Determine the Thermal Performance of Solar Collectors

中国石油天然气总公司, Determination method of heat sealer

SY/T 5798-1993 Evaluation method for wax inhibitors in crude oil Wax deposition tester method

SG-SPRING SG, Determination method of heat sealer

SS 323 Pt.F1-1987 Methods Of Test For Flexible Plastic Packaging Materials Part F1 : Determination Of Heat Seal Strength

国家能源局, Determination method of heat sealer

SY/T 6677-2022 Calibration method of drilling fluid solid phase content measuring instrument

GM North America, Determination method of heat sealer

GM GM9006P-1988 Method for Determining Lip to Case Eccentricity

ES-AENOR, Determination method of heat sealer

UNE 80-118-1986

CU-NC, Determination method of heat sealer

NC 41-46-1987 Leather. Determination of Starching Flexural Strength by Means of Bally Flexometer Testing Method

SE-SIS, Determination method of heat sealer

SIS 65 00 42-1957

Anhui Provincial Standard of the People's Republic of China, Determination method of heat sealer

DB34/T 2135-2014 Determination method of carbon, hydrogen and nitrogen in coal thermal conductivity method

ECIA - Electronic Components Industry Association, Determination method of heat sealer

275-A-1971 Thermistor Definitions and Test Methods

Sichuan Provincial Standard of the People's Republic of China, Determination method of heat sealer

DB51/T 1398-2011 Biomass Gas Calorific Value Determination Method

国家安全生产监督管理总局, Determination method of heat sealer

MT/T 1073-2007 Method for determination of thermal strength of industrial briquettes

Professional Standard - Building Materials, Determination method of heat sealer

JC/T 791-1985 The methods for the measurement and calculation of heat balance,heat efficiency of annular kilns
JC/T 791-2007 The method for the measurement and calculation of heat balance, heat efaciencyof annular kilns
JC/T 1005-2006 Determination of calorific value of cement black raw meal
JC/T 733-2007 Methods for the measuring of heat balance of cement rotary kiln

Professional Standard - Aerospace, Determination method of heat sealer

QJ 990.13-1986 Coating inspection method Determination method of specific gravity of thermal insulation coating

Professional Standard - Chemical Industry, Determination method of heat sealer

HG/T 3087-2001 Method of accelerated determination for Shelf-life of rubber static sealing parts

Professional Standard - Agriculture, Determination method of heat sealer

309药典四部-2020 4000 Testing methods for pharmaceutical packaging materials 4008 Determination of heat seal strength

ES-UNE, Determination method of heat sealer

UNE-EN 13880-8:2020 Hot applied joint sealants - Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion
UNE-EN 13880-13:2019 Hot applied joint sealants - Part 13: Test method for the determination of the discontinuous extension (adherence test)
UNE-EN 13880-6:2019 Hot applied joint sealants - Part 6: Method for the preparation of samples for testing

Professional Standard - Ferrous Metallurgy, Determination method of heat sealer

YB/T 5337-2006 Determination method of metal lattice constant X-ray diffractometer method

GOSTR, Determination method of heat sealer

GOST 7875.1-2018 Refractory products. Method for determination of thermal shock resistance on bricks

Hebei Provincial Standard of the People's Republic of China, Determination method of heat sealer

DB13/T 81.7-1991 Determination method of thermal stability of fireworks and firecrackers

Professional Standard - Energy, Determination method of heat sealer

NB/T 51008-2012 Determination of thermal environment and evaluation methods in coal mine

NZ-SNZ, Determination method of heat sealer

NZS 4214:1977 METHODS OF DETERMINING THE TOTAL THERMAL RESISTANCES OF PARTS OF BUILDINGS

Professional Standard - Electron, Determination method of heat sealer

SJ/T 11037-1996 Test method for thermal stability of electronic glass