ZH
RU
ES
Type tee performance
Type tee performance, Total:498 items.
In the international standard classification, Type tee performance involves: Rotating machinery, Power stations in general, Mining equipment, Elements of buildings, Lighting, Aerospace electric equipment and systems, Mobile services, Fasteners, Ground service and maintenance equipment, Ergonomics, Technical drawings, Fasteners for aerospace construction, Internal combustion engines, Paint ingredients, Components for aerospace construction, Transport, Ventilators. Fans. Air-conditioners, Valves, Textile machinery, Refrigerating technology, Shop fittings, Medical equipment, Energy and heat transfer engineering in general, Characteristics and design of machines, apparatus, equipment, Machine tool systems, Cutting tools, Switchgear and controlgear, Aerospace fluid systems and components, Galvanic cells and batteries, Transformers. Reactors, Applications of information technology, Road vehicle systems, Industrial automation systems, Electrical accessories, Quality, Rubber, Products of the chemical industry, Agricultural machines, implements and equipment, Installations in buildings, Solar energy engineering, Horology, Radiocommunications, Chipless working equipment, Railway rolling stock, Shipbuilding and marine structures in general, Analytical chemistry, Pipeline components and pipelines, Test conditions and procedures in general, Clothes, Materials for aerospace construction, Road engineering, Medical sciences and health care facilities in general, Products of the textile industry, Electronic tubes, Iron and steel products, Farming and forestry, Integrated circuits. Microelectronics, Food products in general, Domestic electrical appliances in general, Graphic technology, Heat recovery. Thermal insulation, Construction materials, Environmental protection, Adhesives, Structures of buildings, Non-ferrous metals.
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Type tee performance
- GB/T 21210-2016 Starting Performance of Single-speed Three-phase Cage Induction Motor
- GB/T 21210-2007 Starting performance of single-speed three-phase cage induction motors
- GB/T 22713-2008 Effects of unbalanced voltages on the performance of three-phase cage induction motor
- GB/T 23461-2009 3D dimensions of male adult headforms
- GB/T 13231-1991 Calculated methods of carrying capacity for receiving and dispatching tracks at railway marshalling station(3-stage/3-yard)
- GB/T 3235-1999 Basic types sizes parameters and characteristics of fans
- GB/T 3235-2008 Basic types sizes parameters and characteristies curve of fans
- GB 18613-2006 Minimum allowable values of energy efficiency and the energy efficiency grades for small and medium three-phase asynchronous motors
- GB 18613-2012 Minimum allowable values of energy efficiency and energy efficiency grades for small and medium three-phase asynchronous motors
- GB 18613-2002 Limited values of energy efficiency and evaluating values of energy conservation of small and medium three-phase asynchronous motors
- GB 30254-2013 Minimum allowable values of energy efficiency and the energy efficiency grades for cage three-phase high voltage induction motor
- GB/T 19130-2015 Tri-wheel vehicles and low-speed goods vehicles.Performance of speed meters
- GB/T 19135-2015 Tri-wheel vehicles and low-speed goods vehicles.Photometric characteristics of reversing lamps
- GB/T 26916-2011 Methods for performance evaluation of small-size integrative hydrogen energy system
- GB/T 7727.3-1987 General terminology for ships--Ship hydrostatics and hydrodynamics
- GB 7727.3-1987 General terms of ship performance
- GB/T 3789.23-1991 Measurements of the electrical properties of transmitting tubes--Measuring methods of grid No3 control ability
- GB/T 32977-2016 Improving corrosion resistance of hot-rolled section steel
- GB/T 19123-2015 Tri-wheel vehicles and low-speed goods vehicles.Photometric characteristics of turn signal lamps
- GB/T 21423-2008 Tri-wheel vehicles fuel tank.Safety property requirements and test methods
- GBJ 82-1985 Testing methods for long-term and long-lasting performance of ordinary concrete
- GB/T 27030-2006 Conformity assessment.General requirements for third-party marks of conformity
Professional Standard - Aviation, Type tee performance
- HB 5727-1983 D type tee pipe joint
- HB 5725-1983 D type tee pipe joint
- HB 5736-1983 Type B tee pipe joint
- HB 5740-1983 Type A tee pipe joint
- HB 5729-1982 E type tee pipe joint
- HB 4-20-1999 Type B tee pipe joint
- HB 4-21-1999 Type A tee pipe joint
- HB 4-18-1999 D type tee pipe joint
- HB 5731-1983 E type tee pipe joint
- HB 5733-1983 Type B tee pipe joint
- HB 5729-1983 E type tee pipe joint
- HB 5734-1983 Type B tee pipe joint
- HB 4-20-1983 Type B tee pipe joint
- HB 4-21-1976 Type A tee pipe joint
- HB 4-19-1999 E type tee pipe joint
- HB 5737-1982 Type A tee pipe joint
- HB 4-18-1983 D type tee pipe joint
- HB 5732-1983 E type tee pipe joint
- HB 5737-1983 Type A tee pipe joint
- HB 4-19-1976 E type tee pipe joint
- HB 4-21-1983 Type A tee pipe joint
- HB 4-19-1983 E type tee pipe joint
- HB 5726-1983 D type tee pipe joint
- HB 5733-1982 Type B tee pipe joint
- HB 5725-1982 D type tee pipe joint
- HB 5728-1983 D type tee pipe joint
- HB 5738-1983 Type A tee pipe joint
- HB 4-20-1976 Type B tee pipe joint
- HB 5730-1983 E type tee pipe joint
- HB 4-18-1976 D type tee pipe joint
- HB 5739-1983 Type A tee pipe joint
- HB 5735-1983 Type B tee pipe joint
- HB 6022~6024-1996 Type A reducing tee pipe joint
- HB 6023-1996 Type A reducing tee pipe joint
- HB 6024-1996 Type A reducing tee pipe joint
- HB 6022-1986 Type A reducing tee pipe joint
- HB 6024-1986 Type A reducing tee pipe joint
- HB 6022-1996 Type A reducing tee pipe joint
- HB 6023-1986 Type A reducing tee pipe joint
- HB 4-18-2002 Tee,D type,flared tube
- HB 4-19-2002 Tee,E type,flared tube
- HB 4-20-2002 Tee,B type,flared tube
- HB 4-21-2002 Tee,A type,flared tube
- HB 5748-1983 Asymmetric A-type tee fittings
- HB 4-22-1999 Asymmetric type B tee pipe joint
- HB 5742-1983 Asymmetric B-type tee joint
- HB 4-64-69 Type A taper thread tee pipe joint
- HB 4-23-1999 Asymmetric Type A Tee Fittings
- HB 5741-1983 Asymmetric B-type tee joint
- HB 5745-1982 Asymmetric A-type tee fittings
- HB 5743-1983 Asymmetric B-type tee joint
- HB 4-23-1983 Asymmetric A-type tee fittings
- HB 4-22-1983 Asymmetric B-type tee joint
- HB 5741-1982 Asymmetric B-type tee joint
- HB 5744-1983 Asymmetric B-type tee joint
- HB 5747-1983 Asymmetric A-type tee fittings
- HB 5745-1983 Asymmetric A-type tee fittings
- HB 4-22-1976 Asymmetric B-type tee joint
- HB 5746-1983 Asymmetric A-type tee fittings
- HB 4-23-1976 Asymmetric A-type tee fittings
- HB 7158-1995 Three-tooth common straight shank mini-end-milling-cutter
- HB 7860-2008 Tee reducer, A type, flareless tube, 28MPa
- HB 6022-2008 Tee reducer, A type, flarsless tube, 21MPa
- HB 6023-2008 Tee reducer, A type, flarsless tube, 21MPa
- HB 6024-2008 Tee reducer, A type, flarsless tube, 21MPa
- HB 8156-2002 Tee, B type,titianium alloy,flared tube
- HB 4-22-2002 Tee,B type,asymmetry,flared tube
- HB 4-23-2002 Tee,A type,asymmetry,flared tube
- HB 8150-2002 Tee, E type, titianium alloy, flared tube
- HB 8148-2002 Titanium alloy flared D type tee pipe coupling
- HB 8158-2002 Tee, B type,asymmetry,titianium alloy,flared tube
- HB 7159-1995 Three-tooth end cutting edge over-center common straight shank mini-end-milling-cutter
- HB 8152-2002 Tee reducer,G type,asymmetry,titianium alloy,flared tube
- HB 8154-2002 Tee reducer,H type,asymmetry,titianium alloy,flared tube
- HB 8205~8208-2002 Tee reducer,D type,with swivel nut,asymmetry,flared tube
- HB 8209~8212-2002 Tee reducer,E type,with swivel nut,asymmetry,flared tube
- HB 8205-2002 Flared type asymmetric D type union tee reducer extender with swivel nut (8205)
- HB 8206-2002 Flared type asymmetric D type union tee reducer extender with swivel nut (8206)
- HB 8207-2002 Flared type asymmetric D type union tee reducer extender with swivel nut (8207)
- HB 8208-2002 Flared type asymmetric D type union tee reducer extender with swivel nut (8208)
- HB 8209-2002 Flared type asymmetric E type union tee reducer extender with swivel nut (8209)
- HB 8210-2002 Flared type asymmetric E type union tee reducer extender with swivel nut (8210)
- HB 8211-2002 Flared type asymmetric E type union tee reducer extender with swivel nut (8211)
- HB 8212-2002 Flared type asymmetric E type union tee reducer extender with swivel nut (8212)
- HB 8213-2002 Flared type asymmetric F type union tee reducer extender with swivel nut (8213)
- HB 8214-2002 Flared type asymmetric F type union tee reducer extender with swivel nut (8214)
- HB 8215-2002 Flared type asymmetric F type union tee reducer extender with swivel nut (8215)
- HB 8216-2002 Flared type asymmetric F type union tee reducer extender with swivel nut (8216)
Professional Standard - Electricity, Type tee performance
- DL/T 1489-2015 Type specification for three-phase smart energy meter
- DL/T 2659-2023 Selection guide for high-pressure three-way valves in power stations
Professional Standard - Coal, Type tee performance
- MT 451-1995 Flameproof low voltage three-phase asynchronous motors intended to be used in coal mines General technical specification for safety performance
- MT 451-2011 General sepcification for lowvoltage three phases flameproofinduction motor for coal mine
国家安全生产监督管理总局, Type tee performance
- MT/T 451-2011 General technical specifications for safety performance of flameproof low-voltage three-phase asynchronous motors for coal mines
RU-GOST R, Type tee performance
- GOST 31310-2005 Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
- GOST IEC 60034-12-2021 Rotating electrical machines. Part 12. Starting performance of single-speed three-phase cage induction motors
- GOST R IEC 60034-12-2009 Rotating electrical machines. Part 12. Starting performance of single-speed three-phase cage induction motors
- GOST R ISO/IEC 17030-2007 General requirements for third party marks of conformity
- GOST 14242-1969 Middle flow three-way actuating device SSI. Types and basic parameters
- GOST 23409.15-1978 Moulding sand mixtures. Method for determination of mouldability
- GOST R 56543-2015 Functional beverages. General specifications
- GOST R IEC 61056-1-2012 General purpose lead-acid batteries (valve-regulated types). Part 1. General requirements, functional characteristics. Methods of test
- GOST 31310-2015 Wall three-layer reinforced concrete panels with enerqy-efficient insulation. General specifications
Korean Agency for Technology and Standards (KATS), Type tee performance
- KS W ISO 1509-2002(2012) General purpose push-pull three-pole circuit-breakers for aircraft-Performance requirements
- KS B 1068-2009 Mechanical and performance properties for prevailing torque type steel nuts
- KS B ISO 7720-2005(2010) Prevailing torque type all-metal hexagon nuts, style 2-Property class 9
- KS C IEC 60034-12:2008 Rotating electrical machines-Part 12:Starting performance of single-speed three-phase cage induction motors for voltages up to and including 660 V
- KS B 5432-1997(2012) Antimagnetic watches-Classification and performance
- KS B ISO 2320:2003 Prevailing torque type steel hexagon nuts-Mechanical and performance properties
- KS B 4075-2014(2020) Test code for performance of sand moulding machines
- KS B 4075-1981 Test code for performance of sand moulding machines
- KS B 5435-1999 Diver’s watches-Classification and performance
- KS B ISO 7041:2008 Prevailing torque type hexagon nuts (with non-metallic insert), style 2-Property classes 9 and 12
- KS B ISO 7046-1-2008(2018) Countersunk flat head screws(common head style) with type H or type Z cross recess-Product grade A-Part 1:Steel of property class 4.8
- KS C 8536-2005 General rules for stand-alone photovoltaic power generating system
- KS Q ISO/IEC 17030:2004 Conformity assessment-General requirements for third-party marks of conformity
- KS M ISO 14679:2007 Adhesives-Measurement of adhesion characteristics by a three-point bending method
- KS X 9001-3-2016 Smart Factory ― Part 3: Operation management system(diagnostics and assessment model)
- KS A 5301-1995(2021) Methods for determining foundry molding sand properties
- KS A 5301-1995(2016) Methods for determining foundry molding sand properties
- KS B ISO 7040:2008 Prevailing torque type hexagon nuts(with non-metallic insert), style 1-Property classes 5, 8 and 10
- KS C 8056-1-2005 Small-sized sealed lead-acid batteries(Valve regulated types)-Part 1:General requirements, functional characteristics-Methods of test
API - American Petroleum Institute, Type tee performance
Professional Standard - Aerospace, Type tee performance
- QJ 214-1977 Tee joint type and size
- QJ 216-1977 Tapered tee joint type and size
- QJ 2889.8-1997 37° Conduit Connector Tee Type and Size
- QJ 2889.10-1997 37° Conduit Connector Tapered Tee Type and Size
- QJ 2889.9-1997 Type and size of 37° conduit connector reducing tee joint
- QJ 2305-1992 Test method for tensile properties of three-dimensional carbon/carbon composite materials
- QJ 2099-1991 Test method for flexural properties of three-dimensional fiber reinforced composite materials
Military Standard of the People's Republic of China-General Armament Department, Type tee performance
- GJB 859.20-1990 Type A reducing tee pipe joint
- GJB 4110.6-2000 General test procedures for design and finalization of military wheeled construction machinery through performance test methods
- GJB 59.19-1988 Armored Vehicle Test Procedures Three Defense Device Performance Test
- GJB 81.6-1985 Military bulldozer design and type test procedures pass performance test method
International Organization for Standardization (ISO), Type tee performance
- ISO/CD 1509 General purpose push-pull three-pole circuit-breakers for aircraft — Performance requirements
- ISO/DIS 1509:2023 General purpose push-pull three-pole circuit-breakers for aircraft — Performance requirements
- ISO/CD 24351 General requirements of three-dimensional modeling for mechanical products
- ISO/IEC GUIDE 28:1982 General rules for a model third-party certification system for products
- ISO/CD TR 17732:2023 Intelligent transport systems — Communications — ITS communication role and functional model
- ISO/DTR 17732:2023 Intelligent transport systems — Communications — ITS communication role and functional model
- ISO 4097:1988 Rubber, ethylene-propylene-diene (EPDM) — Non-oil-extended general purpose types — Evaluation procedure
- ISO 19072-2:2007 Road vehicles - Connection interface for pyrotechnic devices, two-way and three-way connections - Part 2: Test methods and general performance requirements
- ISO/TR 4445:2021 Intelligent transport systems - Mobility integration - Role model of ITS service application in smart cities
- ISO 2320:2008 Prevailing torque type steel nuts - Mechanical and performance properties
- ISO 7046-1:1994 Countersunk flat head screws (common head style) with type H or type Z cross recess; product grade A; part 1: steel of property class 4.8
- ISO 7040:1983 Prevailing torque type hexagon nuts (with non-metallic insert), style 1; Property classes 5, 8 and 10
- ISO 7041:1983 Prevailing torque type hexagon nuts (with non-metallic insert), style 2; Property classes 9 and 12
- ISO 37157:2018 Smart community infrastructures - Smart transportation for compact cities
- ISO/IEC 17030:2003 Conformity assessment - General requirements for third-party marks of conformity
International Federation of Trucks and Engines, Type tee performance
Society of Automotive Engineers (SAE), Type tee performance
- SAE AS5010-2015 FITTING, TEE, EXTERNAL SWAGE, HYDRAULIC
- SAE AMS3260A-1983 ETHYLENE-PROPYLENE-DIENE RUBBER EPDM Type, General Purpose 45 – 55
- SAE AIR34A-1996 PENALTIES IN PERFORMANCE OF THREE-PHASE, FOUR-WIRE, 400-CYCLE MOTORS CAUSED BY THE OPENING OF ONE PHASE
- SAE CRP-013-1997 Heavy Truck Crashworthiness - Phase III
- SAE AS43080-2-1980 AS43080 Tee-Forged Blank-Steel Swaged Pipe Coupling
- SAE AS62370-1-1993 AS62370 Tee - Forged Blank (Cres) Swaged Pipe Coupling
- SAE AS4133B-2013 TEE, STANDARD AND REDUCER, REDUCED BODY, FLARELESS
- SAE AS43088-2-1980 AS43088 Bulkhead Tee-Forged Blank-Steel Swaged Pipe Coupling
- SAE AS43170-1-1980 AS43170 Tee-Forged Blank-Aluminium Alloy Swaged Pipe Coupling
- SAE AS43087-2-1980 AS43087 Bulkhead Tee-Forged Blank-Steel Swaged Pipe Coupling
- SAE AS6045C-2019 FITTING, TEE, STANDARD AND REDUCER, FLARELESS, PRECISION TYPE
- SAE AS43178-1-1980 AS43178 Bulkhead Tee-Forged Blank-Aluminium Alloy Swaged Pipe Coupling
- SAE AS43177-1-1980 AS43177 Bulkhead Tee-Forged Blank-Aluminium Alloy Swaged Pipe Coupling
- SAE AS150E-2014 Hose Assembly, Type Classifications of, Basic Performance and Fire Resistance
- SAE AS150-1994 HOSE ASSEMBLY, TYPE CLASSIFICATIONS OF, BASIC PERFORMANCE AND FIRE RESISTANCE
- SAE J377-1987 PERFORMANCE OF VEHICLE TRAFFIC HORNS
- SAE J377-1977 PERFORMANCE OF VEHICLE TRAFFIC HORNS
- SAE AS6049B-2019 FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARELESS, PRECISION TYPE
- SAE J2030-2009 Heavy-Duty Electrical Connector Performance Standard
- SAE J2030-2002 (R) Heavy-Duty Electrical Connector Performance Standard
American National Standards Institute (ANSI), Type tee performance
British Standards Institution (BSI), Type tee performance
- BS EN 60034-12:2002 Rotating electrical machines - Starting performance of single-speed three-phase cage induction motors
- BS EN 60034-12:2017 Rotating electrical machines. Starting performance of single-speed three-phase cage induction motors
- BS EN ISO 2320:2008 Prevailing torque type steel nuts - Mechanical and performance
properties
- BS EN 61056-1:2012 General purpose lead-acid batteries (valve-regulated types). General requirements, functional characteristics. Methods of test
- BS ISO 19072-2:2013 Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Test methods and general performance requirements
- BS ISO 19072-2:2019 Road vehicles. Connection interface for pyrotechnic devices, two-way and three-way connections. Test methods and general performance requirements
- BS EN ISO 7046-1:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A. Steel of property class 4.8
- 23/30461079 DC BS EN IEC 60034-12. Rotating electrical machines - Part 12. Starting performance of single-speed three-phase cage induction motors
- BS EN 50533:2011 Railway applications. Three-phase train line voltage characteristics
- BS 6716:1986 Guide to properties and types of rubber
- PD IEC/TR 62325-102:2005 Framework for energy market communications. Energy market model example
- BS EN 14175-2:2003 Fume cupboards. Safety and performance requirements
- BS EN 14175-2:2003(2014) Fume cupboards. Safety and performance requirements
- BS EN 14175-8:2022 Fume cupboards. Safety and performance requirements
- BS EN 1716:1997 Plastics piping systems. Polyethylene (PE) tapping tees. Test method for impact resistance of an assembled tapping tee
- BS ISO 16494-1:2022+A1:2023 Heat recovery ventilators and energy recovery ventilators. Method of test for performance - Development of metrics for evaluation of energy related performance
- BS IEC 63011-3:2018 Integrated circuits. Three dimensional integrated circuits - Model and measurement conditions of through-silicon via
- BS EN ISO/IEC 17030:2009 Conformity assessment - General requirements for third-party marks of conformity
Standard Association of Australia (SAA), Type tee performance
(U.S.) Ford Automotive Standards, Type tee performance
Canadian Standards Association (CSA), Type tee performance
- CSA C747-94-CAN/CSA-1994 Essais De Rendement Energetique Des Petits Moteurs Monophases Et Triphases Fiche No 1
- CSA B415.1-2010 Performance testing of solid-fuel-burning heating appliances (Third Edition)
- CAN/CSA-C861-2010 Performance of self-ballasted compact fluorescent lamps and ballasted adapters (Third Edition; Update No. 1: February 2012)
- CSA C861-2010 Performances des lampes fluorescentes compactes à ballast intégré et des adaptateurs à ballast (Troisième édition; Mise à jour no 1: Février 2012)
- CSA C804-09-2009 Performances 閚erg閠iques des distributeurs automatiques deuxi鑝e 閐ition
- CAN/CSA-C22.2 NO.60601-1-6-2011 Medical electrical equipment — Part 1-6: General requirements for basic safety and essential performance — Collateral standard: Usability (Third Edition)
- CSA M422-2014 Fire-performance and antistatic requirements for conveyor belting (Third Edition)
(U.S.) Telecommunications Industries Association , Type tee performance
Professional Standard - Railway, Type tee performance
- TB/T 1168-1991 K1, K2, GK type three-way valve technical conditions
- TB/T 1970-1987 The test method of the three-way valve of the truck on the 701 type test bench
- TB/T 1971-1987 Test method of three-way valve for passenger car on 701 type test bench
Association Francaise de Normalisation, Type tee performance
- NF E25-408:2008 Prevailing torque type steel nuts - Mechanical and performance properties.
- NF E25-408:1997 Prevailing torque type steel hexagon nuts. Mechanical and performance properties.
- NF E48-402*NF ISO 7789:2017 Hydraulic fluid power - Two-, three- and four-port screw-in cartridge valves - Cavities
- NF C51-312:2003 Rotating electrical machines - Part 12 : starting performance of single-speed three-phase cage induction motors.
- NF C51-312*NF EN 60034-12:2017 Rotating electrical machines - Part 12 : starting performance of single-speed three-phase cage induction motors
- NF F60-533*NF EN 50533:2012 Railway applications - Three-phase train line voltage characteristics
- NF EN IEC 61291-2:2023 Amplificateurs optiques - Partie 2 : applications à un seul canal - Modèle de spécifications de performances
- NF EN 61291-2:2016 Amplificateurs optiques - Partie 2 : applications à un seul canal - Modèle de spécifications de performances
- NF EN 61291-4:2012 Amplificateurs optiques - Partie 4 : applications multicanaux - Modèle de spécification de fonctionnement
- NF E25-409:1997 Prevailing torque type hexagon nuts (with non-metallic insert), style 1. Property classes 5, 8 and 10.
- NF EN 13141-4:2021 Ventilation des bâtiments - Essais de performance des composants/produits pour la ventilation des logements - Partie 4 : performance aéraulique, de puissance électrique et acoustique des unités de ventilation simple flux
- NF E25-420:1997 Prevailing torque type all-metal hexagon nuts, style 2. Property classes 5, 8, 10 and 12.
- NF E25-421:1997 Prevailing torque type hexagon thin nuts (with non-metallic insert), style 1, with metric fine pitch thread. Property classes 6, 8 and 10.
- NF EN ISO 13350:2015 Ventilateurs - Essai de performance des ventilateurs accélérateurs
- NF C58-560-1*NF EN 61056-1:2013 General purpose lead-acid batteries (valve-regulated types) - Part 1 : general requirements, functional characteristics - Methods of test
- NF F01-461/IN1*NF EN 15461/IN1:2011 Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements
Defense Logistics Agency, Type tee performance
- DLA A-A-59451 A-2013 TEES, TUBE, STRAIGHT, SOLDER-JOINT, REFRIGERATION
- DLA MS9435 NOTICE 1-1996 BOLT, TEE HEAD - AMS 5735, CHAMFERED, .375-24 UNJF-3A
- DLA MS9435-1962 BOLT, TEE HEAD - AMS 5735, CHAMFERED, .375-24 UNJF-3A
- DLA MS9436 NOTICE 1-1996 BOLT, TEE HEAD - AMS 5735, CHAMFERED, .4375-20 UNJF-3A
- DLA MS9436-1962 BOLT, TEE HEAD - AMS 5735, CHAMFERED, .4375-20 UNJF-3A
- DLA MS9437 NOTICE 1-1996 BOLT, TEE HEAD - AMS 5735, CHAMFERED, .500-20 UNJF-3A
- DLA MS9437-1962 BOLT, TEE HEAD - AMS 5735, CHAMFERED, .500-20 UNJF-3A
- DLA SMD-5962-94623 REV B-2004 MICROCIRCUIT, HYBRID, LINEAR, +5 AND +/-15 VOLT, TRIPLE CHANNEL, DC/DC CONVERTER
- DLA SMD-5962-93073 REV E-2003 MICROCIRCUIT, HYBRID, LINEAR, +5 AND PLUS/MINUS 12 VOLT, TRIPLE CHANNEL, DC/DC CONVERTER
- DLA SMD-5962-93158 REV B-2006 MICROCIRCUIT, HYBRID, LINEAR, +5 AND PLUS/MINUS 12 VOLT, TRIPLE CHANNEL, DC-DC CONVERTER
- DLA SMD-5962-89483 REV E-2008 MICROCIRCUIT, LINEAR, CMOS, QUAD, UNIVERSAL FILTER BUILDING BLOCK, MONOLITHIC SILICON
- DLA DSCC-DWG-89075 REV B-2006 CONNECTOR, ELECTRICAL, INSERT ARRANGEMENT, MINIATURE, THREE SIZE 8 CONTACT CAVITIES
- DLA MIL-PRF-23419/12 E-2012 FUSES, INSTRUMENT TYPE, STYLE FM12 (SUBMINIATURE - HIGH PERFORMANCE)
- DLA SMD-5962-78009 REV D-2004 MICROCIRCUIT, LINEAR, ECL, TRIPLE LINE RECEIVER, MONOLITHIC SILICON
- DLA SMD-5962-08205 REV A-2009 MICROCIRCUIT, HYBRID, LINEAR, TRIPLE CHANNEL, DC-DC CONVERTER
- DLA SMD-5962-08206 REV A-2009 MICROCIRCUIT, HYBRID, LINEAR, TRIPLE CHANNEL, DC-DC CONVERTER
- DLA SMD-5962-08205 REV B-2010 MICROCIRCUIT, HYBRID, LINEAR, TRIPLE CHANNEL, DC-DC CONVERTER
- DLA SMD-5962-08206 REV B-2010 MICROCIRCUIT, HYBRID, LINEAR, TRIPLE CHANNEL, DC-DC CONVERTER
- DLA MIL-PRF-23419/7 J-2012 FUSES, CARTRIDGE, INSTRUMENT TYPE, STYLE FM07, (SUBMINIATURE - HIGH PERFORMANCE)
- DLA MIL-PRF-23419/8 J-2012 FUSE, CARTRIDGE, INSTRUMENT TYPE, STYLE FM08, (SUBMINIATURE - HIGH PERFORMANCE)
IN-BIS, Type tee performance
KR-KS, Type tee performance
Professional Standard - Machinery, Type tee performance
- JB/T 5135.1-2001 General utility small gasoline engine.Performance test method
- JB/T 8158-1999 Starting performance of single-speed three-phase cage induction motors for voltages up to and including 690 V
- JB/T 1308.19-1999 Type,dimensions and specifications of equal - dimameter three - way and equal - diameter four - way PN 250 MPa valves
- JB/T 1308.20-1999 Type,dimensions and specifications of reduced three - way and reduced four - way PN 250 MPa valves
- JB/T 7223-2011 3/2 Solenoid valve for small refrigeration system
- JB/T 7223-1994 Two-position three-way solenoid valve for small refrigeration system
- JB/T 5135.2-2013 General utility small gasoline engine.Part 2: Performance test method
- JB/T 11014-2010 Technical requirements and test methods on seal performance of general utility small gasoline engines
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Type tee performance
- ASHRAE CH-99-14-4-1999 Numerical Analysis of Ventilation System Performance by COMIS Model
- ASHRAE DA-00-9-2000 Symposium on Airtightness@ Ventilation@ Indoor Climate@ and Energy Performance of Small Commercial Buildings
- ASHRAE 4826-2006 Comparative Analysis of Three Solar Models for Tunisia
- ASHRAE 4534-2002 Pressure Loss Data for Large Pipe Tees (RP-1034)
- ASHRAE 3781-1994 Simulation and Performance Analysis of Triple-Effect Absorption Cycles
- ASHRAE 4066-1997 Energy Performance Analysis of Prototype Electrochromic Windows
- ASHRAE DA-07-059-2007 Coupling Multiple Heat production and Consumption Units by Employing a New Three-Pipe System
- ASHRAE PH-97-8-4-1997 Residential Ventilation and Energy Characteristics
- ASHRAE 4582-2002 Frost/Defrost Performance of a Three-Row Fin Staged Heat Pump Evaporator (RP-1002)
- ASHRAE CH-03-9-2-2003 Modeling Transient Performance of Two-Dimensional and Three-Dimensional Building Assemblies (RP-1145)
- ASHRAE CH-03-9-1-2003 Whole Building Energy Simulation with a Three-Dimensional Ground-Coupled Heat Transfer Model
- ASHRAE 4012-1997 Sensitivity Study of Floor and Ceiling Plenum Energy Model Parameters (RP-787)
TIA - Telecommunications Industry Association, Type tee performance
Group Standards of the People's Republic of China, Type tee performance
- T/FSI 006-2017 Water-based cross-linked emulsion of trifluorochlor compolymer
- T/QGCML 453-2022 Three-level intelligent joint control system for mine local fans
- T/GAIA 006.1-2020 The method of performance testing for fume cupboards— Part 1:Type test methods
- T/CCMSA 50213-2020 High Performance Flat Plate Solar Collectors
- T/CEMTA 3.1-2023 General-purpose detonators for industrial electronic detonators - Part 1: Performance specifications
- T/CAMDI 035-2020 Disposable three-way stopcock for infusion and transfusion equipments
- T/ZAII 004-2018 Intelligent manufacturing of lead-acid battery—A general model of intelligent factory
- T/GDAQI 047-2020 GeneralrequirementsforperformancetestingofintelligentInternetofthings
- T/SPEMF 0036-2022 General specification?for performance of water purifiers
- T/SZECDC 004-2023 General technical requirements for three-in-one control connection components for new energy vehicles
- T/CIPR 056-2022 New type wheel hub with good brake performance
- T/CIPR 109-2023 New wheel hub with good braking performance
ETSI - European Telecommunications Standards Institute, Type tee performance
- PRETS 300 175-7-1997 Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security Features (Third Edition)
- ETS 300 175-7-1997 Digital Enhanced Cordless Telecommunications (DECT); Common Interface (CI); Part 7: Security Features (Third Edition)
- EG 201 096-3-1997 Intelligent Network (IN); Cordless Terminal Mobility (CTM); IN Architecture and Functionality for the Support of CTM; Part 3: CTM Interworking between Private Networks and Public Intelligent Networks (V1.1.1)
- EG 201 096-3-1998 Intelligent Network (IN); Cordless Terminal Mobility (CTM); IN Architecture and Functionality for the Support of CTM; Part 3: CTM Interworking between Private Networks and Public INs (V1.1.1)
- TS 102 636-3-2010 Intelligent Transport Systems (ITS); Vehicular Communications; GeoNetworking; Part 3: Network architecture (V1.1.1)
VN-TCVN, Type tee performance
- TCVN 6627-12-2011 Rotating electrical machines.Part 12: Starting performance of single-speed three-phase cage induction motors
International Electrotechnical Commission (IEC), Type tee performance
- IEC 60034-12:2002 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
- IEC 60034-12:2007 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
- IEC 60034-12:2016 RLV Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
- IEC 60034-12:2002+AMD1:2007 CSV Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
- IEC 60034-12:2002/AMD1:2007 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors; Amendment 1
European Committee for Electrotechnical Standardization(CENELEC), Type tee performance
- EN 60034-12:2017 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
- EN 50533:2011 Railway applications - Three-phase train line voltage characteristics
- HD 53.12-1986 Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors for Voltages up to and Including 660 V, 50 Hz
- EN 60034-12:2002 Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors (Incorporates Amendment A1: 2007)
CENELEC - European Committee for Electrotechnical Standardization, Type tee performance
- EN 60034-12:1995 Rotating Electrical Machines Part 12: Starting Performance of Single-Speed Three-Phase Cage Induction Motors for Voltages up to and Including 690 V@ 50 Hz (Incorporates Amendments A2: 1995 and A11: 1999)
ZA-SANS, Type tee performance
- SANS 60034-12:2003 Rotating electrical machines Part 12: Starting performance of single-speed three-phase cage induction motors
- SANS 1700-11-2:1996 Fasteners Part 11: Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A Section 2: Steel of property class 4.8
Danish Standards Foundation, Type tee performance
- DS/EN 60034-12/A1:2008 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
- DS/EN 60034-12:2003 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
- DS/EN 16102:2012 Intelligent transport systems - eCall - Operating requirements for third party support
- DS/EN 60034-26:2007 Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors
- DS/ISO 7042:1985 Prevailing torque type all-metal hexagon nuts, style 2. Property classes 5, 8, 10 and 12
- DS/EN ISO 7046-1:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel of property class 4.8
- DS/EN ISO 7719:2013 Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10
- DS/ISO 7040:1985 Prevailing torque type hexagon nuts (with non-metallic insert), style 1. Property classes 5, 8 and 10
- DS/ISO 7041:1988 Prevailing torque type hexagon nuts (with non-metallic insert), style 2. Property classes 9 and 12
Indonesia Standards, Type tee performance
- SNI IEC 60034-12:2011 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors
AENOR, Type tee performance
- UNE-EN 60034-12:2003 Rotating electrical machines -- Part 12: Starting performance of single-speed three-phase cage induction motors
- UNE-EN 16102:2013 Intelligent transport systems - eCall - Operating requirements for third party support
- UNE-EN 60034-26:2008 Rotating electrical machines -- Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors
- UNE-EN 1716:1997 PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) TAPPING TEES. TEST METHOD FOR IMPACT RESISTANCE OF AN ASSEMBLED TAPPING TEE.
- UNE-EN 60034-12:2003/A1:2008 Rotating electrical machines -- Part 12: Starting performance of single-speed three-phase cage induction motors (IEC 60034-12:2002/A1:2007).
Professional Standard - Textile, Type tee performance
- FZ/T 97010-2016 General technical requirements of cams on circular weft knitting machine
- FZ/T 50009.3-1998 Testing method for crimping performance of three-dimensional crimp polyester staple fibres
IT-UNI, Type tee performance
Professional Standard - Medicine, Type tee performance
- YY/T 1279-2015 Test method for performance of three-dimensional ultrasonography
German Institute for Standardization, Type tee performance
- DIN 4003-180:2017 Concept for the design of 3D models based on properties according to DIN 4000 - Part 180: Tool assemblies
- DIN 4003-210:2015 Concept for the design of 3D models based on properties according to DIN 4000 - Part 210: Cutting machine tools
- DIN 4003-174:2014 Concept for the design of 3D models based on properties according to DIN 4000 - Part 174: Inserts for reaming
- DIN 32869-3:2012-06 Technical product documentation - Three-dimensional CAD-models - Part 3: Features
- DIN EN 16102:2012-03 Intelligent transport systems - eCall - Operating requirements for third party support; German version EN 16102:2011
- DIN 4003-172:2013 Concept for the design of 3D models based on properties according to DIN 4000 - Part 172: Driven tool units
- DIN 4003-127:2013 Concept for the design of 3D models based on properties according to DIN 4000 - Part 127: Reamers for replaceable inserts
- DIN 4003-171:2013 Concept for the design of 3D models based on properties according to DIN 4000 - Part 171: Replaceable inserts for drilling
- DIN 4003-80:2011 Concept for the design of 3D models based on properties according to DIN 4000 - Part 80: Screwing tabs, cold forming taps and screwing dies
- DIN EN ISO 2320:2009 Prevailing torque type steel nuts - Mechanical and performance properties (ISO 2320:2008); English version of DIN EN ISO 2320:2009-03
- DIN 472:2017-06 Retaining rings for bores - Normal type and heavy type
- DIN CEN/TS 17313:2019-06*DIN SPEC 4633:2019-06 Intelligent transport systems - ESafety - Interoperability and user choice in eCall aftermarket and third party eCall services; German version CEN/TS 17313:2019
- DIN EN 1716:1997-03 Plastics piping systems - Polyethylene (PE) tapping tees - Test method for impact resistance of an asssembled tapping tee; German version EN 1716:1997
- DIN EN ISO 7719:2013-04 Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012); German version EN ISO 7719:2012 / Note: To be replaced by DIN EN ISO 7719 (2016-05).
- DIN CEN/TS 17234:2019-05*DIN SPEC 4631:2019-05 Intelligent transport systems - eSafety - eCall: Tests to enable PSAPs to demonstrate conformance and performance; German version CEN/TS 17234:2018
- DIN EN IEC 62325-301:2019-08 Framework for energy market communications - Part 301: Common information model (CIM) extensions for markets (IEC 62325-301:2018); English version EN IEC 62325-301:2018 / Note: DIN EN 62325-301 (2015-01) remains valid alongside this standard until 2021...
- DIN EN 15239:2007 Ventilation for buildings-
Enery performance of buildings-
Guidelines for inspection of ventilation systems
English version of DIN EN 15239:2007-08
Professional Standard - Light Industry, Type tee performance
- QB 2566-2002 Light tricycle for delivery use----General technical requirements
Hebei Provincial Standard of the People's Republic of China, Type tee performance
- DB13/ 473-2001 General technical requirements for safety of light electric tricycles
Japanese Industrial Standards Committee (JISC), Type tee performance
- JIS B 1056:2000 Prevailing torque type steel hexagon nuts -- Mechanical and performance properties
- JIS B 1056:2011 Prevailing torque type steel nuts -- Mechanical and performance properties
- JIS C 4210 AMD 1:2010 Low-voltage three-phase squirrel-cage induction motors for general purpose (Amendment 1)
- JIS E 6002:1989 General rules for performance of electric railcars for commuter use
Fujian Provincial Standard of the People's Republic of China, Type tee performance
- DB35/T 968-2009 Technical conditions for energy-saving three-phase oil-immersed distribution transformers
European Committee for Standardization (CEN), Type tee performance
- EN 16102:2011 Intelligent transport systems - eCall - Operating requirements for third party support
- EN 63:1977 Glass Reinforced Plastics: Determination of Flexural Properties; Three Point Method
- prEN ISO 7719 rev Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10
- EN ISO/IEC 17030:2021 Conformity assessment - General requirements for third-party marks of conformity (ISO/IEC 17030:2021)
- EN ISO/IEC 17030:2009 Conformity assessment - General requirements for third-party marks of conformity
- EN 13775-5:2004 Railway applications - Measuring of new and modified freight wagons - Part 5: Bogies with 3 wheelsets
- CEN/TS 17234:2018 Intelligent transport systems - eSafety - eCall: Tests to enable PSAPs to demonstrate conformance and performance
SAE - SAE International, Type tee performance
- SAE AS6045-2009 FITTING@ TEE@ STANDARD AND REDUCER@ FLARELESS@ PRECISION TYPE
- SAE AS6045A-2012 FITTING@ TEE@ STANDARD AND REDUCER@ FLARELESS@ PRECISION TYPE
- SAE AS6045B-2018 FITTING, TEE, STANDARD AND REDUCER, FLARELESS, PRECISION TYPE
- SAE J377-1998 PERFORMANCE OF VEHICLE TRAFFIC HORNS
- SAE J377-1969 Performance of Vehicle Traffic Horns
- SAE AIR34B-2017 Penalties IN Performance of Three-Phase@ Four-Wire@ 400-Cycle Motors Caused by the Opening of One Phase
- SAE J2030-1994 Heavy-Duty Electrical Connector Performance Standard@ Standard (November 1994)
- SAE J2030-2007 Heavy-Duty Electrical Connector Performance Standard
- SAE J2030-2015 Heavy-Duty Electrical Connector Performance Standard@ Standard (November 1994)
CZ-CSN, Type tee performance
Association of German Mechanical Engineers, Type tee performance
Professional Standard - Post and Telecommunication, Type tee performance
- YD 5084.3-2015 Specification for Seismic Test of Switching Equipment.Part3:Mobile Communication Core Network Equipment
- YD/T 1548.1-2009 Test Method for 2GHz WCDMA Digital Cellular Mobile Communication Network User Equipment(PhaseⅢ)Part 1:Basic Functions,Services and Performance
NZ-SNZ, Type tee performance
- AS/NZS 1359.5:2004 Rotating electrical machines - General requirements Part 5: Three-phase cage induction motors - High efficiency and minimum energy performance standards requirements
Lithuanian Standards Office , Type tee performance
- LST EN 16102-2012 Intelligent transport systems - eCall - Operating requirements for third party support
- LST EN 60034-12-2003 Rotating electrical machines. Part 12: Starting performance of single-speed three-phase cage induction motors (IEC 60034-12:2002)
- LST EN 60034-12-2003/A1-2008 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors (IEC 60034-12:2002/A1:2007)
- LST EN 60034-26-2007 Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors (IEC 60034-26:2006)
Liaoning Provincial Standard of the People's Republic of China, Type tee performance
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Type tee performance
AT-ON, Type tee performance
- ONORM EN 63-1979 Glass reinforced plastics. Determination of flexural properties. Three point method.
工业和信息化部, Type tee performance
- JB/T 13862-2020 Three-wheel vehicle sliding performance requirements and test methods
- JB/T 13863-2020 Climbing performance requirements and test methods for three-wheel vehicles
- JB/T 13864-2020 Braking performance requirements and test methods for three-wheel vehicles
- YD/T 1548.1-2019 WCDMA digital cellular mobile communication network terminal equipment testing method (Phase 3) Part 1: Basic functions, services and performance testing
- YB/T 4831-2020 Thickness direction properties of hot-rolled H-shaped steel
National Aeronautics and Space Administration (NASA), Type tee performance
- NASA NACA-RM-L7K07-1948 Flight characteristics at low speed of delta-wing models
- NASA-CR-165720-1981 A comparison of some static and dynamic mechanical properties of 18 x 5.5 and 49 x 17 type VII aircraft tires as measured by three test facilities
Building Officials and Code Administrators International(U.S.), Type tee performance
SSPC - The Society for Protective Coatings, Type tee performance
- PS 28.02-2010 Three-Coat Moisture-Cured Polyurethane Coating System@ Performance-Based
PL-PKN, Type tee performance
- PN Z04220-02-1991 Air purity protection Tests for triethylenetetramine content Determination of triethylenetetramine in work places by high performance li?uid chromatography
- PKN-CEN/TS 17313-2021-05 E Intelligent transport systems -- ESafety -- Interoperability and user choice in eCall aftermarket and third party eCall services
- PN C82055-02-1991 Test methods of pressed carbon products Determination of flexural strength by three-point method
- PKN-CEN/TS 17234-2021-05 E Intelligent transport systems -- eSafety -- eCall: Tests to enable PSAPs to demonstrate conformance and performance
U.S. Military Regulations and Norms, Type tee performance
- ARMY MIL-PRF-49471/1 A VALID NOTICE 1-2007 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X599/U
- ARMY MIL-PRF-49471/1 A (1)-2002 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X599/U
- ARMY MIL-PRF-49471/1 A-2000 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X599/U
- ARMY MIL-PRF-49471/2 A VALID NOTICE 1-2007 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X598/U
- ARMY MIL-PRF-49471/2 A (1)-2002 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X598/U
- ARMY MIL-PRF-49471/2 A-2000 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X598/U
- ARMY MIL-PRF-49471/3 A VALID NOTICE 1-2007 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X590/U
- ARMY MIL-PRF-49471/3 A (1)-2002 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X590/U
- ARMY MIL-PRF-49471/6 A VALID NOTICE 1-2007 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X557/U
- ARMY MIL-PRF-49471/6 A (1)-2002 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X557/U
- ARMY MIL-PRF-49471/6 A-2000 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X557/U
- ARMY MIL-PRF-49471/7 A VALID NOTICE 1-2007 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X558/U
- ARMY MIL-PRF-49471/7 A (1)-2002 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X588/U
- ARMY MIL-PRF-49471/7 A-2000 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X588/U
- ARMY MIL-PRF-49471/8 A VALID NOTICE 1-2007 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X600/U
- ARMY MIL-PRF-49471/8A (1)-2002 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X600/U
- ARMY MIL-PRF-49471/8A-2000 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X600/U
- ARMY MIL-PRF-49471/12A-2000 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X093/U
- ARMY MIL-C-12124-1952 CUP, CASE, CARTRIDGE, STEEL, CAL. .50 MODIFIED THREE DRAW PROCESS
- ARMY MIL-PRF-49471/11 A VALID NOTICE 1-2007 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X800/U
- ARMY MIL-PRF-49471/11 A (1)-2002 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X800/U
- ARMY MIL-PRF-49471/11 A-2000 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X800/U
- ARMY MIL-PRF-49471/12 A VALID NOTICE 1-2007 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X093/U
- ARMY MIL-PRF-49471/12A (1)-2002 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, BA-X093/U
- ARMY MIL-PRF-39009 E-2004 RESISTORS, FIXED, WIRE WOUND, (POWER TYPE, CHASSIS MOUNTED), NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
- ARMY MIL-PRF-49471/10 A VALID NOTICE 1-2007 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, WATERTIGHT, BA-X112/U
- ARMY MIL-PRF-49471/10 A (2)-2002 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, WATERTIGHT, BA-X112/U
- ARMY MIL-PRF-49471/10 A-2000 BATTERY, NON-RECHARGEABLE, HIGH PERFORMANCE, WATERTIGHT, BA-X112/U
National Metrological Technical Specifications of the People's Republic of China, Type tee performance
- JJF 1608-2016 Rules of Metrology Testing for Energy Efficiency of Small and Medium Three-phase Asynchronous Motors
WRC - Welding Research Council, Type tee performance
American Welding Society (AWS), Type tee performance
- WRC 238:1978 Plastic Stability of Pipes and Tees Exposed to External Couples
ES-UNE, Type tee performance
- UNE-CEN/TS 17313:2019 Intelligent transport systems - ESafety - Interoperability and user choice in eCall aftermarket and third party eCall services (Endorsed by Asociación Española de Normalización in May of 2019.)
- UNE-CEN/TS 17234:2018 Intelligent transport systems - eSafety - eCall: Tests to enable PSAPs to demonstrate conformance and performance (Endorsed by Asociación Española de Normalización in January of 2019.)
CEN - European Committee for Standardization, Type tee performance
- PD CEN/TS 17313:2019 Intelligent transport systems - ESafety - Interoperability and user choice in eCall aftermarket and third party eCall services
- PD CEN/TS 17234:2018 Intelligent transport systems - eSafety - eCall: Tests to enable PSAPs to demonstrate conformance and performance
Shandong Provincial Standard of the People's Republic of China, Type tee performance
- DB37/T 2953-2017 Environmentally friendly product technical requirements Glycerol type, propylene glycol type of heat transfer medium for solar water heating system
- DB37/T 4367-2021 General requirements for the joint construction of three areas of production and living ecology in new rural communities
RO-ASRO, Type tee performance
- STAS 1848/4-1986 Safety of traffic TRAFFIC LIGHTS Emplacement and performance
- STAS 7246/9-1974 THREE-PHASE INDUCTION MOTORS Methods of test Eeteimination of on load performances
BE-NBN, Type tee performance
- NBN T 41-002-1977 Glass reinforced plastics - Determination of flexural properties - Three point method
The Society for Protective Coatings (SSPC), Type tee performance
- SSPC PS 28.02-2010 Three-Coat Moisture-Cured Polyurethane Coating System, Performance-Based
国家能源局, Type tee performance
- NB/T 10524-2021 Test method for supporting performance of three machines in fully mechanized mining working face
American Society for Testing and Materials (ASTM), Type tee performance
- ASTM F1291-99 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
- ASTM F1291-22 Standard Test Method for Measuring the Thermal Insulation of Clothing Using a Heated Manikin
Professional Standard - Traffic, Type tee performance
Professional Standard - Electron, Type tee performance
- SJ 20126-1992 Interoperability and performance requirement for short wave single-sideband communication equipment
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Type tee performance
- IPC 6011 GERMAN-1996 Allgemeine Leistungsspezifikation f黵 Leiterplatten Generic Performance Specification for Printed Boards
- IPC 6011-1996 Generic Performance Specification for Printed Boards
Taiwan Provincial Standard of the People's Republic of China, Type tee performance
- CNS 11524-2006 Method of test for windows and doors-general rule
- CNS 11524-2003 Method of test for windows and doors-general rule
- CNS 852-1982 Ductile Cast Iron Special Castings for Pressure Main Lines,All Flanged Tees (AFT)
IPC - Association Connecting Electronics Industries, Type tee performance
Professional Standard - Chemical Industry, Type tee performance
- HG/T 4903-2016 Dynamically full vulcanized thermoplastic elastomer (TPV).Ethylene-propylene-diene/polypropylene type
Shanghai Provincial Standard of the People's Republic of China, Type tee performance
- DB31/T 614-2012 Technical performance requirements for energy-saving and low-noise cooling towers
IEC - International Electrotechnical Commission, Type tee performance
- IEC 851-5:1996 Winding Wires - Test Methods - Part 5: Electrical Properties Third Edition
European Telecommunications Standards Institute (ETSI), Type tee performance
- ETSI PRETS 300 187-1993 Integrated Services Digital Network (ISDN); Three-Party (3PTY) Supplementary Service Functional Capabilities and Information Flows
- ETSI PRETS 300 187-1992 Integrated Services Digital Network (ISDN); Three Party (3PTY) Supplementary Service Functional Capabilities and Information Flows
- ETSI TS 132 405-2008 Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); Telecommunication management; Performance Management (PM); Performance measurements Universal Terrestrial Radio Access Network (UTRAN) Performance m
TH-TISI, Type tee performance
- TIS 17030-2007 Conformity assessment.general requirements for third.party marks of conformity
国家市场监督管理总局、中国国家标准化管理委员会, Type tee performance
- GB/T 39744-2021 General requirements of mechanical product electronic manual based on three-dimensional model
- GB/T 40814-2021 Intelligent manufacturing—Customization—Capability maturity model
未注明发布机构, Type tee performance
- BS EN 15239:2007(2008) Ventilation for buildings — Energy performance of buildings — Guidelines for inspection of ventilation systems
ES-AENOR, Type tee performance