ZH
RU
ES

Sample Mass Concentration

Sample Mass Concentration, Total:499 items.

In the international standard classification, Sample Mass Concentration involves: Air quality, Beverages, Food products in general, Animal feeding stuffs, Laboratory medicine, Shipbuilding and marine structures in general, Water quality, Quality, Particle size analysis. Sieving, Construction materials, Soil quality. Pedology, Medical equipment, Milk and milk products, Nuclear energy engineering, Radiation measurements, Prepackaged and prepared foods, Compressors and pneumatic machines, Metalliferous minerals, Products of the textile industry, Thermodynamics and temperature measurements, Fruits. Vegetables, Semiconducting materials, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Geology. Meteorology. Hydrology, Products of the chemical industry, Jewellery, Microbiology, Rubber and plastics products, Protection against fire, Farm buildings, structures and installations, Software development and system documentation, Cereals, pulses and derived products, Test conditions and procedures in general, Standardization. General rules, Farming and forestry, Meat, meat products and other animal produce, Radiation protection, Wastes, Semiconductor devices, Vocabularies.

VN-TCVN, Sample Mass Concentration

TCVN 6157-1996 Ambient air.Determination of the mass concentration of ozone.Chemiluminescence method
TCVN 7556-1-2005 Health care solid waste incinerators.Determination of the mass concentration of PCDDs/PCDFs.Part 1: Sampling
TCVN 5754-1993 Work place air.Methods for determination of mass concentration of toxic gases and vapours.General sampling methods
TCVN 5978-1995 Air quality.Determination of mass concentration of sulphur dioxide in ambient air.Thorin spectrophotometry method
TCVN 5977-2009 Stationary source emissions.Manual determination of mass concentration of particulate matter
TCVN 6662-2000 Water quality.Measurement of biochemical parameters.Spectrometry determination of the chlorophyll-a concentration
TCVN 5972-1995 Ambient air.Determination of the mass concentration of carbon monoxide.Gas chromatographic method
TCVN 6138-1996 Ambient air.Determination of the mass concentration of nitrogen oxides.Chemiluminescence method
TCVN 7172-2002 Stationary source emissions.Determination of the mass concentration of nitrogen oxides.Naphthylethylenediamine photometric method
TCVN 6750-2000 Stationary source emissions.Determination of mass concentration of sulfur dioxide.Ion chromatography method

British Standards Institution (BSI), Sample Mass Concentration

BS ISO 13271:2012 Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
BS EN 14412:2004 Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
BS EN 14412:2004(2009) Indoor air quality - Diffusive samplers the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
19/30367217 DC BS EN 17346. Ambient Air Quality. Standard method for the determination of the concentration of ammonia by diffusive sampling
BS EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Sampling of PCDDs/PCDFs
BS EN 13528-1:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - General requirements
BS EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Automated pumped sampling with in situ gas chromatography
BS ISO 12141:2002 Stationary source emissions. Determination of mass concentration of particulate matter (dust) at low concentrations. Manual gravimetric method
BS ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
BS EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN 14662-1:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by thermal desorption and gas chromatography
BS EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
BS EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
BS EN 14662-4:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by thermal desorption and gas chromatography
BS EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
BS EN 13528-3:2003(2008) Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Guide to selection, use and maintenance
BS ISO 16000-37:2019 Indoor air - Measurement of PM₂$d,₅ mass concentration
BS EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
BS EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
BS EN 14662-5:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Diffusive sampling followed by solvent desorption and gas chromatography
BS EN 14662-2:2005(2010) Ambient air quality - Standard method for measurement of benzene concentrations - Pumped sampling followed by solvent desorption and gas chromatography
BS PD CEN/TS 1948-5:2015 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Long-term sampling of PCDDs/PCDFs and PCBs
BS EN 13528-2:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Specific requirements and test methods
BS EN 16161:2012 Water quality. Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples
BS EN 16966:2018 Workplace exposure. Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates. Metrics to be used such as number concentration, surface area concentration and mass concentration
BS EN 1948-4:2010+A1:2013 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Sampling and analysis of dioxin-like PCBs
BS ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
BS ISO 9096:2017 Stationary source emissions. Manual determination of mass concentration of particulate matter
BS EN ISO 21877:2019 Stationary source emissions. Determination of the mass concentration of ammonia. Manual method
BS EN 14625:2005 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
BS DD CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Sampling and analysis of dioxin-like PCBs
BS EN ISO 13161:2015 Water quality. Measurement of polonium 210 activity concentration in water by alpha spectrometry
BS EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry
BS EN 13725:2022 Air quality - Determination of odour concentration by dynamic olfactometry
BS EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
BS EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
BS EN 14791:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
BS EN 13205-4:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Laboratory performance test based on comparison of concentrations
DD CEN/TS 1948-4:2007 Stationary source emissions — Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs — Part 4: Sampling and analysis of dioxin-like PCBs
BS EN 13284-2:2005 Stationary source emissions - Determination of low range mass concentration of dust - Automated measuring systems
BS EN 13284-2:2004 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems
BS ISO 8573-8:2004 Compressed air - Test methods for solid particle content by mass concentration
BS EN 12341:2014 Ambient air. Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
BS EN 13284-2:2017 Tracked Changes. Stationary source emissions. Determination of low range mass concentration of dust. Quality assurance of automated measuring systems
BS ISO 11564:1998 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method
BS EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
BS EN 12127:1998 Textiles - Fabrics - Determination of mass per unit area using small samples
BS PD CEN/TR 13205-3:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Analysis of sampling efficiency data

International Organization for Standardization (ISO), Sample Mass Concentration

ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
ISO 25597:2013 Stationary source emissions - Test method for determining PM<(Index)2,5> and PM<(Index)10> mass in stack gases using cyclone samplers and sample dilution
ISO/CD 12141 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
ISO 23196:2022 Water quality — Calculation of biological equivalence (BEQ) concentrations
ISO 16000-37:2019 Indoor air — Part 37: Measurement of PM2,5 mass concentration
ISO 12141:2002 Stationary source emissions - Determination of mass concentration of particulate matter (dust) at low concentrations - Manual gravimetric method
ISO 23909:2008 Soil quality - Preparation of laboratory samples from large samples
ISO/CD TS 6818 Traditional Chinese medicine — Test method for moxa floss quality — concentration of waste particles
ISO 9096:2017 Stationary source emissions — Manual determination of mass concentration of particulate matter
ISO 23210:2009 Stationary source emissions - Determination of PM<(Index)10>/PM<(Index)2,5> mass concentration in flue gas - Measurement at low concentrations by use of impactors
ISO 6767:1990 Ambient air; determination of the mass concentration of sulfur dioxide; tetrachloromercurate (TCM)/pararosaniline method
ISO 4221:1980 Air quality; Determination of mass concentration of sulphur dioxide in ambient air; Thorin spectrophotometric method
ISO 8761:1989 Work-place air; determination of mass concentration of nitrogen dioxide; method using detector tubes for short-term sampling with direct indication
ISO 13161:2011 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry
ISO 9096:2003 Stationary source emissions - Manual determination of mass concentration of particulate matter
ISO 10313:1993 Ambient air; determination of the mass concentration of ozone; chemiluminescence method
ISO 21877:2019 Stationary source emissions— Determination of the mass concentration of ammonia — Manual method
ISO 13271:2012/CD Amd 1:2011 Stationary source emissions — Determination of PM10/PM2,5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors — Amendment 1
ISO 4591:1992 Plastics; film and sheeting; determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
ISO/DIS 12141:2023 Stationary source emissions - Determination of low range mass concentration of dust - Manual gravimetric method
ISO 10260:1992 Water quality; measurement of biochemical parameters; spectrometric determination of the chlorophyll-a concentration
ISO 7996:1985 Ambient air; Determination of the mass concentration of nitrogen oxides; Chemiluminescence method
ISO 8186:1989 Ambient air; determination of the mass concentration of carbon monoxide; gas chromatographic method
ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned calibrators and control materials
ISO 8299:1993 Determination of isotopic content and concentration of uranium and plutonium in nitric acid solution; mass spectrometric method
ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
ISO 8760:1990 Work-place air — Determination of mass concentration of carbon monoxide — Method using detector tubes for short-term sampling with direct indication

RU-GOST R, Sample Mass Concentration

GOST 32113-2013 Alcoholic products and raw materials for their production. Enzymatic method for determination of citric acid mass fraction
GOST R 52690-2006 Foods. Voltammetric method of vitamin C mass concentration determination
GOST 31660-2012 Foods. Anodic stripping voltammetric method of iodine mass concentration determination
GOST R 52689-2006 Foods. Anodic stripping voltammetric method of iodine mass concentration determination
GOST 34749-2021 Alcoholic and non-alcoholic products. Method for the determination of the mass concentration of quinine
GOST 31628-2012 Food-stuffs and food raw materials. Anodic stripping voltammetric method of arsenic mass concentration determination
GOST R 52968-2008 Ethanol from food raw material. Method for determination of mass concentration of dry residue
GOST 18165-1989 Drinking water. Method for determination of aluminium mass concentration
GOST 4152-1989 Drinking water. Method for determination of arsenic mass concentration
GOST R 52391-2005 Wine production. Method for determination of citric acid mass concentration
GOST 31685-2012 Rectified ethanol from food raw material. Method for determination of mass concentration of dry residue
GOST R ISO 13271-2016 Stationary source emissions. Determination of PM/PM mass concentration in flue gas. Measurement at higher concentrations by use of virtual impactors
GOST R 55247-2012 Dairy componented and milkcontained products. Determination of fat mass concentration by Weibull-Berntrop method
GOST R ISO 9096-2006 Stationary source emissions. Manual determination of mass concentration of particulate matter
GOST 32930-2014 Ethanol from food raw material, strong drinks. Spectrophotometric method for determination of the mass concentration of furfurol
GOST R 53954-2010 Wine production. Identification. Method of determining the mass concentration of ash and ash alkalinity
GOST 15113.1-1977 Food concentrates. Methods for determination of packing quality, net and volume weight, separate components mass fraction, particle size of certain types of product and milling grade
GOST R 51655-2000 Alcohol products and raw material for it's production. Method for determination of free and total sulphurous acid mass concentration
GOST R ISO 8573-8-2007 Compressed air. Part 8. Test methods for solid particle content by mass concentration
GOST 33527-2015 Milk and dairy component products for baby food. Determination of mono- and disugars mass concentration by method of capillary electrophoresis
GOST 14138-2014 Alcoholic beverages and raw materials for its production. Spectrophotometric method for determination of mass concentration higher alcohols
GOST R 52716-2007 Work-place air. Determination of mass concentration of carbon monoxide. Method using detector tubes for short-term sampling with direct indication
GOST R 52717-2007 Work-place air. Determination of mass concentration of nitrogen dioxide. Method using detector tubes for short-term sampling with direct indication
GOST R 51181-1998 Food concentrates for children and dietary nutrition. Procedure of mass parts measurement of carotinoids
GOST 30305.3-1995 Condensed preserved and dry milk products. Procedures of measurement of titrimetric acidity
GOST 32713-2014 Alcoholic beverages and raw materials for its production. Identification. Enzymatic method for determination of D-malic acid mass concentration
GOST R 53971-2010 Wine production. Determination of mass concentration of triazole pesticides by capillary electrophoresis method in combination with solid-phase extraction
GOST ISO 18153-2011 In vitro diagnostic medical devices. Measurement of quantities in biological samples. Metrological traceability of assigned values for catalytic concentration of enzymes in calibrators and control materials
GOST R ISO 7708-2006 Air quality. Particle size fraction definitions for health-related sampling

BELST, Sample Mass Concentration

STB 17.13.05-49-2021 Еnvironmental pгоtесtion аnd nature use. Sampling and measurements, monitoring. Water quality. Determination of the mass concentration of nitrogen-containing substances using photometric tests

Association Francaise de Normalisation, Sample Mass Concentration

NF X43-324:1997 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs. Part 1 : Sampling.
FD T90-012:2021 Water quality - Determination of metal content - Method for the measurement of metal concentration with passive sampling by diffusive gradient in thin films
NF X43-063*NF EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentration of gases and vapours - Guide for selection, use and maintenance
NF ISO 25597:2014 Émissions de sources fixes - Méthode d'essai pour la détermination de la concentration en masse de PM 2,5 et PM 10 dans les gaz émis à la cheminée en utilisant des échantillonneurs cyclone et une dilution d'échantillon
NF X43-710:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Part 1 : measurement at low concentrations by use of impactors.
NF EN ISO 23210:2009 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des faibles concentrations au moyen d'impacteurs
NF ISO 23909:2008 Qualité du sol - Préparation des échantillons de laboratoire à partir d'échantillons de grande taille
FD X43-070-6:2019 Air quality - Practical guidance for estimating the uncertainty of measurement on polluant concentration in ambient air - Part 6 : estimation of the uncertainties on mass concentrations of particulate matters measured automatically
NF X43-602*NF EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
NF X43-324-1*NF EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1 : sampling of PCDDs/PCDFs
NF EN 1948-1:2006 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 1 : prélèvement des PCDD/PCDF
NF EN 16161:2012 Qualité de l'eau - Lignes directrices pour l'utilisation de techniques d'absorption in vivo pour l'estimation de la concentration de chlorophylle-a dans des échantillons d'eau de mer et d'eau douce
NF ISO 13271:2012 Émissions de sources fixes - Détermination de la concentration en masse de PM10/PM2,5 dans les effluents gazeux - Mesurage à des hautes concentrations à l'aide des impacteurs virtuels
XP X43-321:2018 Qualité de l'air - Émissions de sources fixes - Détermination de la concentration massique d'ammoniac par des techniques instrumentales
NF X43-302:1986 Qualité de l'air - Émissions de sources fixes - Détermination de la concentration de poussière par opacimétrie à lumière réfléchie.
NF M60-412:1998 Requirements for representative sampling of uranyl nitrate solutions for the determination of uranium concentration.
NF X43-308*NF EN ISO 21877:2019 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method
NF EN ISO 21877:2019 Émissions de sources fixes - Détermination de la concentration en masse de l'ammoniac - Méthode manuelle
XP X43-322:2018 Air quality - Stationary source emission - Determination of the mass concentration of formaldehyde by instrumental techniques
NF EN 14662-5:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration de benzène - Partie 5 : prélèvement par diffusion suivi d'une désorption au solvant et d'une chromatographie gazeuse
NF EN 14662-2:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 2 : prélèvement par pompage suivi d'une désorption au solvant et d'une méthode de chromatographie en phase gazeuse
NF X43-342*NF ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors.
NF T90-207*NF EN 16161:2012 Water quality - Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples.
NF EN 14662-1:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage des concentrations en benzène - Partie 1 : échantillonnage par pompage suivi d'une désorption thermique et d'une méthode chromatographie en phase gazeuse
NF EN 16966:2018 Exposition sur les lieux de travail - Mesurage de l'exposition par inhalation de nano-objets et de leurs agrégats et agglomérats - Métriques à utiliser telles que concentration en nombre, concentration en surface et concentration en masse
NF EN 13211:2001 Qualité de l'air - Émissions de sources fixes - Méthode manuelle de détermination de la concentration en mercure total
NF X43-064*NF EN 14625:2013 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
NF G07-108:1986 Textiles. Determination of the heat retention of materials by measurement of the thickness and mass of specimens.
NF X43-324-4/IN1*NF EN 1948-4/IN1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4 : sampling and analysis of dioxin-like PCBs
NF ISO 8760:1990 Air des lieux de travail - Détermination de la concentration en masse du monoxyde de carbone - Méthode utilisant des tubes détecteurs pour échantillonnage rapide à lecture directe.
NF ISO 8761:1990 Air des lieux de travail - Détermination de la concentration en masse du dioxyde d'azote - Méthode utilisant des tubes détecteurs pour échantillonnage rapide à lecture directe.
NF EN 14412:2004 Qualité de l'air intérieur - Échantillonnage par diffusion pour la détermination de la concentration des gaz et des vapeurs - Guide pour la sélection, l'utilisation et la maintenance
NF X43-029-3:2005 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 3 : automated pumped sampling with in situ gas chromatography.
NF X43-029-2*NF EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : pumped sampling followed by solvent desorption and gas chromatography
NF X31-501:1992 Qualité des sols - Méthodes physiques - Mesure de la masse volumique apparente d'un échantillon de sol non remanié - Méthode du cylindre.
NF M60-808:2011 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry.
NF X43-327:2003 Air quality - Determination of odour concentration by dynamic olfactometry.
NF X43-372:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method.
NF X43-029-5*NF EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5 : diffusive sampling followed by solvent desorption and gas chromatography.
NF EN 12127:1998 Textiles - Étoffes - Détermination de la masse surfacique sur de petits échantillons.
XP X43-324-5*XP CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5 : long-term sampling of PCDDs/PCDFs and PCBs
XP CEN/TS 1948-5:2015 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 5 : prélevement à long terme de PCDD/PCDF et PCB
NF EN 14662-3:2015 Qualité de l'air ambiant - Méthode normalisée pour le mesurage de la concentration en benzène - Partie 3 : prélèvement par pompage automatique avec analyse chromatographique en phase gazeuse sur site
NF X44-052:2002 Émissions de sources fixes - Détermination de fortes concentrations massiques de poussières - Méthode gravimétrique manuelle
NF EN 15549:2008 Qualité de l'air - Méthode normalisée pour le mesurage de la concentration du benzo[a]pyrene dans l'air ambiant
NF X43-029-1*NF EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : pumped sampling followed by thermal desorption and gas chromatography
NF X43-029-3*NF EN 14662-3:2015 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 3 : automated pumped sampling with in situ gas chromatography
NF EN 14662-4:2005 Qualité de l'air ambiant - Méthode normalisée pour le mesurage des concentrations en benzène - Partie 4 : échantillonnage par diffusion suivi d'une désorption thermique et d'une chromatographie en phase gazeuse
XP CEN/TS 17021:2018 Émissions de sources fixes - Détermination de la concentration massique en dioxyde de soufre par des techniques instrumentales
NF EN 13205-5:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 5 : essais de performances des échantillonneurs d'aérosols, réa...
NF EN 13284-2:2017 Émissions de sources fixes - Détermination de faibles concentrations en masse de poussières - Partie 2 : assurance qualité des systèmes de mesurage automatisés
NF X43-029-4*NF EN 14662-4:2005 Ambient air quality - Standard method for the measurement of benzene concentrations - Part 4 : diffusive sampling followed by thermal desorption and gas chromatography
NF X43-560*NF EN 15549:2008 Air quality - Standard method for the measurement of the concentration of Benzo[a]pyrene in ambient air
NF X43-324-4*NF EN 1948-4+A1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4 : sampling and analysis of dioxin-like PCBs
NF EN 1948-4/IN1:2014 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 4 : prélèvement et analyse des PCB de type dioxine
NF EN 1948-4+A1:2014 Émissions de sources fixes - Détermination de la concentration massique en PCDD/PCDF et PCB de type dioxine - Partie 4 : prélèvement et analyse des PCB de type dioxine
FD X43-284*FD CEN/TR 15547:2007 Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
NF X43-049*NF EN 12341:2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
NF EN 13284-1:2017 Émissions de sources fixes - Détermination de faibles concentrations en masse de poussières - Partie 1 : méthode gravimétrique manuelle
NF X43-333-2*NF EN 13284-2:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 2 : quality assurance of automated measuring systems
NF X43-339*NF ISO 11564:2000 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method.
NF X43-336*NF EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury.
XP X43-043*XP CEN/TS 17021:2018 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
NF X43-254*NF ISO 8760:1990 Work-place air. Determination of mass concentration of carbon monoxide. Method using detector tubes for short-term sampling with direct indication.
NF EN 13528-1:2003 Qualité de l'air - Echantillonneurs par diffusion pour la détermination des concentrations des gaz et des vapeurs - Prescriptions et méthodes d'essai - Partie 1: prescriptions générales
NF ISO 8573-8:2004 Air comprimé - Partie 8 : méthodes d'essai pour la détermination de la teneur en particules solides par concentration massique
NF X43-283-4*NF EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4 : laboratory performance test based on comparison of concentrations
NF EN ISO 16665:2014 Qualité de l'eau - Lignes directrices pour l'échantillonnage quantitatif et le traitement d'échantillons de la macrofaune marine des fonds meubles
NF EN ISO 18153:2004 Dispositifs médicaux de diagnostic in vitro - Mesurage des grandeurs dans des échantillons d'origine biologique - Traçabilité métrologique des valeurs de concentration catalytique des enzymes attribuées aux agents d'étalonnage et aux matériau...

Korean Agency for Technology and Standards (KATS), Sample Mass Concentration

KS A 0082-2008(2018) Low volume air samplers and methods for measuring mass concentration of airborne dust by the low volume air samplers
KS I ISO 12141:2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 12141:2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
KS P ISO 18153-2010(2016) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control mater
KS P ISO 18153-2010(2021) In vitro diagnostic medical devices－Measurement of quantities in biological samples－Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control mater
KS I ISO 12141:2007 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 23909:2009 Soil quality－Preparation of laboratory samples from large samples
KS I ISO 13271-2014(2019) Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
KS I ISO 9096:2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
KS I ISO 23210:2012 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
KS I ISO 23210:2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
KS I ISO 23210:2017 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
KS I ISO 6767:2006 Ambient air－Determination of the mass concentration of sulphur dioxide [Tetrachloromercurate (TCM)/pararosaniline method]
KS I ISO 13271:2014 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at higher concentrations by use of virtual impactors
KS I ISO 23909-2009(2019) Soil quality－Preparation of laboratory samples from large samples
KS I ISO 4221:2006 Air quality－Determination of mass concentration of sulphur dioxide in ambient air(Thorin spectrophotometric method)
KS I ISO 4221-2006(2016) Air quality－Determination of mass concentration of sulphur dioxide in ambient air(Thorin spectrophotometric method)
KS I ISO 8760:2008 Work-place air－Determination of mass concentration of carbon monoxide－Method using detector tubes for short-term sampling with direct indication
KS I ISO 8761:2008 Work-place air－Determination of mass concentration of nitrogen dioxide－Method using detector tubes for short-term sampling with direct indication
KS I ISO 9096:2009 Stationary source emissions－Manual determination of mass concentration of particulate matter
KS I ISO 10313:2005 Ambient air-Determination of the mass concentration of ozone(Chemiluminescence method)
KS I ISO 10313-2005(2020) Ambient air－Determination of the mass concentration of ozone(Chemiluminescence method)
KS E ISO 9599:2018 Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method
KS E ISO 12745:2003 Copper, lead and zinc ores and concentrates－Precision and bias of mass measurement techniques
KS I ISO 10260:2006 Water quality－Measurement of biochemical parameters－Spectrometric determination of the chlorophyll-a concentration
KS I ISO 10260-2006(2021) Water quality－Measurement of biochemical parameters－Spectrometric determination of the chlorophyll-a concentration
KS E ISO 12743:2008 Copper, lead, zinc and nickel concentrates-Sampling procedures for determination of metal and moisture content
KS I ISO 11564-2014(2019) Stationary source emissions — Determination of the mass concentration of nitrogen oxides(naphthylethylenediamine photometric method)
KS I ISO 7996:2006 Ambient air－Determination of the mass concentration of nitrogen oxides(Chemiluminescence method)
KS I ISO 8186:2006 Ambient air－Determination of the mass concentration of carbon monoxide(Gas chromatographic method)
KS M 9107-1996 Water quality-Measurement of biochemeical parameters(Spectrometric determination of the chlorophyll-a concentration)
KS I ISO 8186-2006(2016) Ambient air－Determination of the mass concentration of carbon monoxide(Gas chromatographic method)
KS I ISO 7996-2006(2016) Ambient air－Determination of the mass concentration of nitrogen oxides(Chemiluminescence method)
KS I ISO 7996:2021 Ambient air — Determination of the mass concentration of nitrogen oxides — Chemiluminescence method
KS I ISO 8186:2021 Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method
KS P ISO 18153:2010 In vitro diagnostic medical devices-Measurement of quantities in biological samples-Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials
KS I ISO 7708-2010(2016) Air quality－Particle size fraction definitions for health-related sampling
KS I 2004-2005(2010) Air quality－Particle size fraction definitions for health-related sampling
KS I ISO 11564:2004 Stationary source emissions-Determination of the mass concentrationof nitrogen oxides(Naphthylethylenediamine photometric method)
KS I ISO 11564:2014 Stationary source emissions — Determination of the mass concentration of nitrogen oxides(naphthylethylenediamine photometric method)
KS I ISO 11632:2004 Stationary source emissions-Determination of the massconcentration of sulfur dioxide(Ion chromatography method)
KS I ISO 11632:2014 Stationary source emissions — Determination of the mass concentration of sulfur dioxide(ion chromatography method)
KS I ISO 11632-2014(2019) Stationary source emissions — Determination of the mass concentration of sulfur dioxide(ion chromatography method)

National Metrological Technical Specifications of the People's Republic of China, Sample Mass Concentration

JJF 1659-2017 Calibration Specification for PM2.5 Mass Concentration Measurement Instruments

CEN - European Committee for Standardization, Sample Mass Concentration

PREN 17346-2019 Ambient Air Quality - Standard method for the determination of the concentration of ammonia by diffusive sampling
EN 16966:2018 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration@ surface area concentration and mass concentration
EN ISO 9698:2019 Water quality - Tritium - Test method using liquid scintillation counting
PREN 13205-2010 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations

European Committee for Standardization (CEN), Sample Mass Concentration

EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
EN ISO 13161:2020 Water quality - Polonium 210 - Test method using alpha spectrometry (ISO 13161:2020)
prEN ISO 23196 Water quality - Calculation of biological equivalence (BEQ) concentrations (ISO 23196:2022)
EN ISO 23196:2023 Water quality - Calculation of biological equivalence (BEQ) concentrations (ISO 23196:2022)
EN 14662-3:2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
EN 14662-3:2015 Ambient air - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
EN ISO 13161:2015 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry
EN 16161:2012 Water quality - Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples
EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
EN 13528-3:2003 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Requirements and test methods - Part 3: Guide to selection, use and maintenance
EN ISO 21877:2019 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019)
EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
EN 1948-1:1996 Stationary Source Emissions - Determination of the Mass Concentration of PCDDs/PCDFs - Part 1: Sampling
EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
EN ISO 9698:2015 Water quality - Determination of tritium activity concentration - Liquid scintillation counting method
CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs
EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
CEN EN 15549-2008 Air quality — Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography
EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
PD CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
CEN/TR 15547:2007 Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
FprEN 12341 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
EN ISO 8299:2021 Nuclear fuel technology - Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry (ISO 8299:2019)
EN 14791:2017 Stationary source emissions - Determination of mass concentration of sulphur oxides - Standard reference method
PD CEN/TS 17021:2017 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
EN 13528-1:2002 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours; Requirements and test methods - Part 1: General requirements
EN 12127:1997 Textiles - Fabrics - Determination of mass per unit area using small samples
EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations

German Institute for Standardization, Sample Mass Concentration

DIN EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance; German version EN 14412:2004
DIN EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs English version of DIN EN 1948-1:2006-06
DIN EN ISO 23210:2009-12 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009); German version EN ISO 23210:2009
DIN EN 16966:2019 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
DIN EN ISO 13161:2016-01 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry (ISO 13161:2011); German version EN ISO 13161:2015 / Note: To be replaced by DIN EN ISO 13161 (2019-11).
DIN EN ISO 23196:2023-07 Water quality - Calculation of biological equivalence (BEQ) concentrations (ISO 23196:2022); German and English version prEN ISO 23196:2023 / Note: Date of issue 2023-06-02
DIN EN ISO 23196:2023-11 Water quality - Calculation of biological equivalence (BEQ) concentrations (ISO 23196:2022); German version EN ISO 23196:2023
DIN EN 1948-1:2006-06 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs; German version EN 1948-1:2006
DIN EN 16161:2012-09 Water quality - Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples; German version EN 16161:2012
DIN ISO 16000-37:2019-05 Indoor air - Part 37: Measurement of PM<(Index)2,5> mass concentration (ISO 16000-37:2019)
DIN EN 16966:2019-01 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration; German version EN 16966:2018
DIN EN 14662-4:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
DIN EN 14662-1:2022-09 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German and English version prEN 14662-1:2022 / Note: Date of issue 2022-07-29*Intended as r...
DIN EN 14662-1:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005 / Note: To be replaced by DIN EN 14662-1 (2022-09).
DIN EN ISO 21877:2020-01 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019); German version EN ISO 21877:2019
DIN ISO 16000-37:2019 Indoor air - Part 37: Measurement of PM mass concentration (ISO 16000-37:2019)
DIN EN 14662-3:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography; German version EN 14662-3:2005
DIN EN 14662-2:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography; German version EN 14662-2:2005
DIN EN 14662-5:2005-08 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography; German version EN 14662-5:2005
DIN SPEC 91127:2011 Recommendation for Temperature Calibration of Fast Scanning Calorimeters (FSCs) for Sample Mass and Scan Rate; Text in English
DIN EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry; German version EN 13725:2003
DIN ISO 16000-37:2018 Indoor air - Part 37: Measurement of PM mass concentration (ISO/DIS 16000-37:2018); Text in German and English
DIN EN 14412:2004-12 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance; German version EN 14412:2004
DIN EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography; German version EN 14662-4:2005
DIN EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography; German version EN 14662-1:2005
DIN EN ISO 18153:2003-11 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003); German version EN ISO 181...
DIN CEN/TS 1948-5:2015-06*DIN SPEC 33970:2015-06 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs; German version CEN/TS 1948-5:2015
DIN EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air; German version EN 15549:2008
DIN EN 15549:2008-06 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air; German version EN 15549:2008
DIN EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography; German version EN 14662-2:2005
DIN EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography; German version EN 14662-5:2005
DIN EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; German version EN 13211:2001
DIN CEN/TS 17021:2017-05*DIN SPEC 33976:2017-05 Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques; German version CEN/TS 17021:2017
DIN EN 13211 Berichtigung 1:2005-06 Air quality - Stationary source emissions - Manual methode of determination of the concentration of total mercury; German version EN 13211:2001, Corrigenda to DIN EN 13211:2001-06; German version EN 13211:2001/AC:2005
DIN EN 14791:2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method; English version of DIN EN 14791:2006-04
DIN EN 13211:2001-06 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury; German version EN 13211:2001
DIN 58932-1:2023-08 Haematology - Determination of the concentration of blood corpuscles in blood - Part 1: Blood collection, sample preparation, influence quantities, interference factors; Text in German and English
DIN EN 13528-3:2004 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance; German version EN 13528-3:2003
DIN EN 13528-3:2004-04 Ambient air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Part 3: Guide to selection, use and maintenance; German version EN 13528-3:2003
DIN EN ISO 18153:2003 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
DIN EN 1948-4:2014-03 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs; German version EN 1948-4:2010+A1:2013
DIN EN 13205-4:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version EN 13205-4:2014
DIN EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
DIN EN 13284-2:2018-02 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems; German version EN 13284-2:2017 / Note: Applies in conjunction with DIN EN 14181 (2015-02).
DIN EN ISO 13161:2016 Water quality - Measurement of polonium 210 activity concentration in water by alpha spectrometry (ISO 13161:2011)
DIN CEN/TS 17638:2021-09 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method; German version CEN/TS 17638:2021
DIN CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs; German version CEN/TS 1948-4:2007
DIN EN 12127:1997 Textiles - Fabrics - Determination of mass per unit area using small samples; German version EN 12127:1997
DIN EN ISO 16665:2014-06 Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna (ISO 16665:2014); German version EN ISO 16665:2013

Professional Standard - Medicine, Sample Mass Concentration

YY/T 0638-2008 In vitro diagnostic medical devices.Measurement of quantities in biological samples.Metrological traceability of assigned values for catalytic concentration of enzymes in calibrators and control materials

American Society for Testing and Materials (ASTM), Sample Mass Concentration

ASTM D6331-14 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations &40;Manual Gravimetric Method&41;
ASTM E1413-06 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
ASTM D5756-02 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration
ASTM D5756-95 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Mass Concentration

KR-KS, Sample Mass Concentration

KS I ISO 12141-2017 Stationary source emissions－Determination of mass concentration of particulate matter(dust) at low concentrations－Manual gravimetric method
KS I ISO 12141-2022 Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method
KS I ISO 23210-2017 Stationary source emissions－Determination of PM10/PM2.5 mass concentration in flue gas－Measurement at low concentrations by use of impactors
KS I ISO 9096-2020 Stationary source emissions — Manual determination of mass concentration of particulate matter
KS I ISO 23210-2022 Stationary source emissions — Determination of PM10/PM2.5 mass concentration in flue gas — Measurement at low concentrations by use of impactors
KS E ISO 9599-2018 Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method
KS I ISO 7996-2021 Ambient air — Determination of the mass concentration of nitrogen oxides — Chemiluminescence method
KS I ISO 8186-2021 Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method
KS I ISO 16665-2015 Water quality — Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna

U.S. Military Regulations and Norms, Sample Mass Concentration

ARMY MIL-A-46186-1984 ARMOR PLATE, STEEL, WROUGHT, HIGH-STRENGTH, HIGH-QUALITY
ARMY MIL-DTL-46193 A-1998 ARMOR PLATE, CONTROL ROLLED, STEEL, WROUGHT, HIGH STRENGTH, HIGH QUALITY

未注明发布机构, Sample Mass Concentration

ISO 25597:2013/Cor 1:2015 Stationary Source Emissions. Technical Corrigendum 1 for Test Method for Determination of PM and PM Mass in Stack Waste Using Cyclone Samples and Sample Concentration Dilutions
BS EN 1948-1:2006(2019) Stationary source emissions - Determination of the mass concentration of PCDDs / PCDFs and dioxin - like PCBs Part 1 : Sampling of PCDDs / PCDFs
DIN EN 14626:2005 Air quality — measuring method for determining the concentration of carbon monoxide using non-dispersive infrared photometry
BS ISO 10260:1992(2014) Water quality — Measurement of biochemical parameters — Spectrometric determination of the chlorophyll - a concentration
DIN EN 1948-3:1997 Emissions from stationary sources —— Determination of mass concentration of PCDD/PCDF I Part 3: Identification and quantification
DIN EN 13211 Ber-1:2005 Air quality — Emissions from stationary sources — Manual method for determining total mercury concentration
BS ISO 11632:1998(1999) Stationary source emissions — Determination of mass concentration of sulfur dioxide — Ion chromatography method
BS EN ISO 16665:2013(2014) Water quality — Guidelines for quantitative sampling and sample processing of marine soft - bottom macrofauna

GOSTR, Sample Mass Concentration

GOST 34128-2017 Juice products. Refractometric method for the determination of soluble solids mass concentration
GOST R 59016-2020 Mineral natural drinking waters. Determination of the mass concentration of bromide ions by the photometric method
GOST 28326.4-1989 Technical liquid ammonia. Determination of oil mass concentration by spectrophotometry method
GOST R 58797-2020 Drinking bottled water. Determination of mass concentration of dissolved oxygen. Measurement procedure
GOST 33834-2016 Wine products and raw materials for it’s production. Gas chromatographic method for determination of mass concentration of volatile components
GOST R 57893-2017 Products of fermentation and raw materials for it’s production. Gas chromatographic method for determination of mass concentration of volatile components
GOST R 54760-2011 Мilk products and infant milk products. Method for determination of mass concentration of mono- and disugar using high performance liquid chromatography
GOST 33815-2016 Wine products and raw materials for it’s production. Method for determination of mass concentration of total and the reduced extract

Japanese Industrial Standards Committee (JISC), Sample Mass Concentration

JIS Z 7152:2013 Determination of PM10/PM2.5 mass concentration in flue gas by use of virtual impactors
JIS Z 8813:1994 Measuring methods for suspended particulate matter concentration in air-general requirements
JIS B 8392-9:2008 Compressed air -- Part 9: Test methods for liquid water content by mass concentration

HU-MSZT, Sample Mass Concentration

Jilin Provincial Standard of the People's Republic of China, Sample Mass Concentration

DB22/T 1952-2013 Product quality inspection sampling sample management specification
DB22/T 1951-2013 On-site sampling management specification for product quality

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Sample Mass Concentration

GB 14882-1994 Limited concentrations of radioactive materials in foods
GB/T 13277.8-2023 Compressed air part 8: Methods of measurement of mass concentration of solid particles
GB/T 20220-2006 Plastic.Film and sheeting.Determination of average thickness of a sample,and average thickness and yield of a roll,by gravimetric techniques (gravimetric thickness)
GB/T 15000.5-2023 Reference sample working instructions part 5: Internal development of quality control samples
GB/T 14162-1993 Sampling procedures and tables for product quality audit(Apply to inspection by attributes for nonconformities per hundued units)
GB/T 14900-1994 Single sampling procedures and tables for product quality audit by variableg for mean value
GB/T 16306-1996 Procedures and the plan of sampling for repeat test or inspection in product quality audit
GB/T 14437-1997 Single sampling procedures and tables by attributes for product quality audit
GB/T 28863-2012 Sampling inspection procedures for commodity applying to the case with prior information of quality

SE-SIS, Sample Mass Concentration

SIS SS-ISO 8760:1990 Work-place air — Determination of mass concentration of carbon monoxide — Method using detector tubes for short-term sampling with direct indication
SIS SS-ISO 8761:1990 Work-place air — Determination of mass concentration of nitrogen dioxide — Method using detector tubes for short- term sampling with direct indication
SIS SS 02 84 23-1991 Air Quality — Stationary source emissions — Determination of the total mass concentration ofmercury — Flameless atomic absorption methods
SIS SS 02 84 22-1990 Stationary source emissions — Determination of the mass concentration of hydrogen chloride — Potentiometric titration.

AENOR, Sample Mass Concentration

UNE-ISO 12141:2006 Stationary source emissions -- Determination of mass concentration of particulate matter (dust) at low concentrations -- Manual gravimetric method (ISO 12141:2002)
UNE-EN 13725:2004 Air quality - Determination of odour concentration by dynamic olfactometry
UNE-EN 14662-4:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
UNE-EN 14662-1:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
UNE-EN 1948-1:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
UNE-EN ISO 23210:2010 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
UNE 77203:1993 AIR QUALITY. DETERMINATION OF MASS CONCENTRATION OF SULPHUR DIOXIDE IN AMBIENT AIR. THORIN SPECTROPHOTOMETRIC METHOD.
UNE-EN 16161:2013 Water quality - Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples
UNE-ISO 9096:2005 Stationary source emissions -- Manual determination of mass concentration of particulate matter
UNE 77232:1996 AMBIENT AIR. DETERMINATION OF THE MASS CONCENTRATION OF OZONE. CHEMILUMINESCENCE METHOD.
UNE-EN 14412:2005 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
UNE-EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
UNE-EN 14662-2:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography
UNE-EN 14662-5:2006 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
UNE 77228:2002 Stationary source emissions. Determination of the mass concentration of nitrogen oxides. Naphthylethylenediamine photometric method.
UNE-EN ISO 18153:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
UNE 77212:1993 AMBIENT AIR. DETERMINATION OF THE MASS CONCENTRATION OF NITROGEN OXIDES. CHEMILUMINESCENCE METHOD.
UNE-EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury.
UNE-EN 1948-4:2011+A1:2014 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
UNE-EN 12341:2015 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
UNE 77226:1999 STATIONARY SOURCE EMISSIONS. DETERMINATION OF MASS CONCENTRATION OF SULFUR DIOXIDE. ION CHROMATOGRAPHY METHOD.
UNE-EN 13205-4:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations

国家市场监督管理总局、中国国家标准化管理委员会, Sample Mass Concentration

GB/T 39193-2020 Ambient air—Determination of particulate matter mass concentration—Gravimetric method
GB/T 38358-2019 Sampling method of quality monitoring for E-commerce product

RO-ASRO, Sample Mass Concentration

STAS SR ISO 10275-1:1997 PI aste rs - General specification sample preparing, preparation of normal consistency paste and determination of white degree
STAS SR ISO 10313:1995 Ambient air - Detennination of the mass concentration of ozon -Chemiluminescence method
STAS SR ISO 10260:1996 Water quality - Measurement of biochemical parameters -Spectrometric determination of the chlorophylle - a concentration

Professional Standard - Machinery, Sample Mass Concentration

JB/T 53596-1999 Product quality classification of central drive thickener
JB/T 53526-1999 Dispatch winch product quality classification

Group Standards of the People's Republic of China, Sample Mass Concentration

T/CHYY 011-2023 Quality specification for the production of organic selenium-rich concentrated products
T/QGCML 1501-2023 Agricultural product quality and safety sampling and storage device
T/BSPT 003-2018 Performance test method for fine particulate matter （PM2.5 ）mass concentration measurement instruments based on light scattering principle
T/SDAS 460-2022 Product quality supervision and spot check sampling work specification
T/CASAS 010-2019 Determination of Trace Impurities Concentration and Distribution in GaN Materials by Secondary Ion Mass Spectrometry
T/NAIA 036-2021 Sampling specification for quality and safety supervision of edible agricultural products

Danish Standards Foundation, Sample Mass Concentration

DS/EN 13725/AC:2006 Air quality – Determination of odour concentration by dynamic olfactometry
DS/EN 13725:2003 Air quality - Determination of odour concentration by dynamic olfactometry
DS/EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors
DS/EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography
DS/EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
DS/EN 1948-1:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
DS/EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2: Pumped sampling followed by solvent desorption and gas chromatography
DS/ISO 13271:2012 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at higher concentrations by use of virtual impactors
DS/EN 16161:2012 Water quality - Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples
DS/EN 14412:2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
DS/EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
DS/EN 14662-5:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
DS/EN 14662-3:2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
DS/EN 14791:2005 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
DS/ISO 11564+Cor.1:2000 Stationary source emissions - Determination of the mass concentration of nitrogen oxides - Naphthylethylenediamine photometric method
DS/CEN/TS 17638:2021 Stationary source emissions – Manual method for the determination of the mass concentration of formaldehyde – Reference method
DS/EN 13211/AC:2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
DS/EN 13211:2001 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
DS/ISO 11704:2010 Water quality - Measurement of gross alpha and beta activity concentration in non-saline water - Liquid scintillation counting method
DS/EN 1948-4:2011 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
DS/CEN/TR 15547:2007 Workplace atmospheres - Calculation of the health-related aerosol fraction concentration from the concentration measured by a sampler with known performance characteristics
DS/ISO 11632:1998 Stationary source emissions - Determination of mass concentration of sulfur dioxide - Ion chromatography method
DS/EN ISO 16665:2006 Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna

Lithuanian Standards Office , Sample Mass Concentration

LST EN 13725-2004 Air quality - Determination of odour concentration by dynamic olfactometry
LST EN 13725-2004/AC-2006 Air quality - Determination of odour concentration by dynamic olfactometry
LST EN 14662-1-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography
LST EN 14662-4-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
LST EN 1948-1-2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs
LST EN ISO 23210:2009 Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009)
LST EN 16161-2012 Water quality - Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples
LST EN 14412-2004 Indoor air quality - Diffusive samplers for the determination of concentrations of gases and vapours - Guide for selection, use and maintenance
LST EN 15549-2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
LST EN 14662-3-2005 Ambient Air Quality - Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography
LST EN 14662-2-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography
LST EN 14662-5-2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
LST EN 14791-2006 Stationary source emissions - Determination of mass concentration of sulphur dioxide - Reference method
LST EN ISO 18153:2004 In vitro diagnostic medical devices - Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials (ISO 18153:2003)
LST EN 13211-2002 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
LST EN 13211-2002/AC-2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
LST EN 1948-4-2011 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
LST EN 12341-2014 Ambient air - Standard gravimetric measurement method for the determination of the PM10 or PM2,5 mass concentration of suspended particulate matter
LST ISO 9696:2008 Water quality - Measurement of gross alpha activity in non-saline water - Thick source method (ISO 9696:2007, identical)
LST ISO 9697:2009 Water quality - Measurement of gross beta activity in non-saline water - Thick source method (ISO 9697:2008, identical)
LST EN 12619-2000 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon at low concentrations in flue gases - Continuous flame ionisation detector method

IT-UNI, Sample Mass Concentration

EC 1-2021 UNI EN 13725-2021 Air quality - Determination of odour concentration by dynamic olfactometry

Shaanxi Provincial Standard of the People's Republic of China, Sample Mass Concentration

DB61/T 1430-2021 Product Quality Inspection Sampling Procedures

ES-UNE, Sample Mass Concentration

UNE-ISO 9096:2005/COR 1:2009 Stationary source emissions -- Manual determination of mass concentration of particulate matter
UNE-EN 16966:2022 Workplace exposure - Measurement of exposure by inhalation of nano-objects and their aggregates and agglomerates - Metrics to be used such as number concentration, surface area concentration and mass concentration
UNE-EN ISO 21877:2020 Stationary source emissions - Determination of the mass concentration of ammonia - Manual method (ISO 21877:2019)
UNE-EN 13211:2001/AC:2005 Air quality - Stationary source emissions - Manual method of determination of the concentration of total mercury
UNE-EN 13284-2:2018 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Quality assurance of automated measuring systems
UNE-CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method (Endorsed by Asociación Española de Normalización in August of 2021.)

AT-ON, Sample Mass Concentration

ONORM M 6272-1985 Water analysis; determination of the mass concentration of settleable matter in water and waste water
ONORM M 6274-1985 Water analysis; determination ofthe mass concentration offilterable matter and its residue on ignition

FI-SFS, Sample Mass Concentration

SFS 5265-1987
SFS 5293-1987
SFS 3864-1977 Determination of mass concentration of sulphur dioxide in ambient air. Analysis by the photometric thorin method

PL-PKN, Sample Mass Concentration

PN Z04112-06-1990 Air purity protection Tests for vinyl chloride Determination of vinyl chloride in ambient air (immission) by gas chromatography with sample enrichment
PN A74104-1986 Baked goods Sampling and qualit inspection

Standard Association of Australia （SAA）, Sample Mass Concentration

AS 4595:1999 Copper, lead and zinc sulfide concentrates - Precision and bias of mass measurement techniques

NL-NEN, Sample Mass Concentration

NEN 2795-1985 Air quality - Ambient air and indoor air Determination of the concentration of methanal (formaldehyde) - Pararosanilin photometric method
NVN 2968-1992 Air quality. Workplace atmosphere. Determination of the concentration of ketones by active sorbent tube sampling, thermal desorption and gas chromatography
NVN 2964-1992 Air quality. Workplace atmosphere. Determination of the concentration of vaporous chlorinated hydrocarbons by active sorbent tube sampling, liquid desorption and gas chromatography
NVN 2961-1992 Air quality. Workplace atmosphere. Determination of the concentration of aliphatic hydrocarbons by active sorbent tube sampling, thermal desorption and gas chromatography

Professional Standard - Electron, Sample Mass Concentration

SJ/T 11493-2015 Test method for measuring nitrogen concentration in silicon substrates by secondary ion mass spectrometry
SJ/T 11375-2007 Software component.Product quality.Part 2: Quality metrics
SJ/T 11498-2015 Test method for measuring oxygen contamination in heavily doped silicon substrates by secondary ion mass spectrometry

中国气象局, Sample Mass Concentration

QX/T 476-2019 Beta ray method for observing the mass concentration of aerosol PM10 and PM2.5

CU-NC, Sample Mass Concentration

NC 92-09-2-1984 Quality Control. Methods for Selecting Random Samples
NC 92-32-1981 Quality Control. Chemical Products General Rules for Sampling

Hunan Provincial Standard of the People's Republic of China, Sample Mass Concentration

DB43/T 1999-2021 Sampling specification for product quality supervision and random inspection

Yunnan Provincial Standard of the People's Republic of China, Sample Mass Concentration

DB53/T 438-2012 Jade Jewelry Quality Grade Evaluation Standard Sample

PT-IPQ, Sample Mass Concentration

NP 1352-1976

ZA-SANS, Sample Mass Concentration

SANS 4591:2003 Plastics - Film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
SANS 9126-4:2004 Software engineering - Product quality Part 4: Quality in use metrics

CZ-CSN, Sample Mass Concentration

CSN 05 1022-1986 Welding. Classiíication of consumables for welding from the viewpoint of aerosols geueiation. Sampling of aeroaols
CSN ISO 2859-3:1993 Sampling procedures for inspection by attributes. Part 3: Skip-lot sampling procedures

Professional Standard - Meteorology, Sample Mass Concentration

QX/T 307-2015 Observation method of atmospheric aerosol mass concentration.Tapered element oscillating microbalance

IN-BIS, Sample Mass Concentration

IS 5182 Pt.15-1974

Professional Standard - Agriculture, Sample Mass Concentration

空气和废气监测分析方法 5.1.4-2003 Chapter 5 Pollution Source Monitoring Chapter 1 Sampling 4 Emission Concentration Calculation of Emissions

Shandong Provincial Standard of the People's Republic of China, Sample Mass Concentration

DB37/T 3870-2020 Technical regulations for sample preparation for agricultural product quality and safety monitoring
DB37/T 3869-2020 Technical regulations for preservation of agricultural product quality and safety monitoring samples

Xinjiang Provincial Standard of the People's Republic of China, Sample Mass Concentration

DB6523/T 354-2023 Technical regulations for preservation of agricultural product quality and safety monitoring samples
DB6523/T 352-2023 Technical regulations for sample preparation for agricultural product quality and safety monitoring
DB6523/T 353-2023 Agricultural product quality and safety monitoring and sampling technical specifications
DB65/ 302-2000 Single sampling procedures and tables by attributes for product quality audit
DB65/T 302-2000 One-time sampling inspection procedure and sampling plan for product quality supervision and counting

Inner Mongolia Provincial Standard of the People's Republic of China, Sample Mass Concentration

DB15/T 1171-2017 Evaluation of Nutritional Quality and Balance Degree of Dairy Cow Diet Samples

International Electrotechnical Commission (IEC), Sample Mass Concentration

IEC 61563:2019 Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Sample Mass Concentration

ASHRAE OR-94-22-1994 Carbon Dioxide Concentration as an Indicator of Ventilation Rate and IAQ
ASHRAE CH-93-22-1993 Carbon Dioxide Concentration as an Indicator of Ventilation Rate and IAQ

Military Standard of the People's Republic of China-General Armament Department, Sample Mass Concentration

GJB 9254-2017 Determination method of mass concentration of neodymium element in neodymium phosphate glass ICP-AES method

Hebei Provincial Standard of the People's Republic of China, Sample Mass Concentration

DB13/T 5139-2019 Standards for sampling and management of livestock product quality and safety monitoring samples

CL-INN, Sample Mass Concentration

INDITECNOR 20-13ch-1960

Association of German Mechanical Engineers, Sample Mass Concentration

VDI 2119-2013 Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration