ZH
RU
ES

Advantages of Chromatography

Advantages of Chromatography, Total:499 items.

In the international standard classification, Advantages of Chromatography involves: Ferrous metals, Ferroalloys, Sugar. Sugar products. Starch, Food products in general, Analytical chemistry, Electronic components in general, Soil quality. Pedology, Fuels, Refractories, Animal feeding stuffs, Natural gas, Water quality, Physics. Chemistry, Metalliferous minerals, Edible oils and fats. Oilseeds, Fertilizers, Surface treatment and coating, Pharmaceutics, Paint ingredients, Sensory analysis, Non-ferrous metals, Fruits. Vegetables, Equipment for entertainment, Nuclear energy engineering, Glass, Quality, Optical equipment, Welding, brazing and soldering, Meat, meat products and other animal produce, Power stations in general, Testing of metals, Paper and board, Tobacco, tobacco products and related equipment, Construction materials, Plastics, Organic chemicals, Raw materials for rubber and plastics, Products of the chemical industry, Wood, sawlogs and sawn timber, Company organization and management, Rubber and plastics products, Protection against dangerous goods, Hydraulic construction, Petroleum products in general, Construction industry, Paints and varnishes, Vocabularies, METALLURGY, Beverages, Protection against fire, Air quality, Farming and forestry, General methods of tests and analysis for food products, Cereals, pulses and derived products, Pesticides and other agrochemicals, Geology. Meteorology. Hydrology, Milk and milk products, AGRICULTURE, Insulating materials, Elements of buildings, Microbiology, Linear and angular measurements, Software development and system documentation, Iron and steel products, Sports equipment and facilities, Environmental protection.

American Gear Manufacturers Association, Advantages of Chromatography

AGMA 06FTM06-2006 An Analytical Approach to the Prediction of Micropitting on Case Carburised Gears
AGMA 90FTMS1-1990 Kinematic Analysis of Transmissions - Based on the Finite Element Method
AGMA 2000FTM12-2000 Finite Strips Methods as an Alternative to the Finite Elements in Gear Tooth Stress and Strain Analysis
AGMA 91FTM16-1991 Contact Analysis of Gears Using a Combined Finite Element and Surface Integral Method
AGMA 11FTM28-2011 Simulation of Wear for High Contact Ratio Gear - A Mixed FE and Analytical Approach

Professional Standard - Petroleum, Advantages of Chromatography

SY/T 5119-1995 Tomographic Analysis Method of Rock Soluble Organisms and Crude Group Components
SY/T 6338-1997 Analysis of family composition of rock extract and crude oil by tlc-fid
SY/T 5239-1991 Methods for Hydrogen and Carbon Isotope Analysis of Petroleum and Sedimentary Organic Matter
SY/T 5777-1995 Analysis method of core resonance hydrogen spectrum and carbon spectrum of rock soluble organic matter and crude oil
SY 5777-1995 H NMR and C NMR analysis methods of rock soluble organic matter and crude oil

RO-ASRO, Advantages of Chromatography

STAS 12001-1981 NATURAL GASES Cromatographyc analysis in gasous phase
STAS 9538/3-1974 PAPER FOR CHROMATOGRAPHY AND ELECTROPHORESIS Fluorescence analysis
STAS 9538/3-1981 PAPER FOR CHROMATOGRAPHY AND ELECTROPHORESIS Fluorescence analysis
SR 110-2-1995 Sugar. Methods of analysis. Estimation of European points
STAS 12968-1991 Metallic coatings. Setting bathes of tin-lead alloy. Analysis methods
STAS SR EN 10188-1994 Chemical analysis of ferrous materials. Determination of chromium in steels and irons. Flame atomic absorption spectrometric method
STAS 8283/1-1980 CORD FABRICS OF MAN-MADE FIBRES FOR TYRES Rules for quality checking and analysis methods and tests

Professional Standard - Agriculture, Advantages of Chromatography

GB 10221.4-1988 Sensory analysis terminology related to analytical methods
GB/T 5009.56-1996 Analytical method of pastry hygienic standard
水产品质量安全检验手册 1.2.4.6-2005 Chapter 1 General introduction Section 2 Analytical methods for aquatic product inspection 4. Physicochemical analysis method (6) Chromatographic method
NY/T 1121.25-2012 Soil testing.Part 25:Method for determination of available phosphorus by continuous flow analyzer
NY/T 2548-2014 Determination of aflatoxin B<下标1> in feed.Time-resolved fluorescent immunochromatographic method
KJ 201707 Colloidal gold immunochromatography method for rapid detection of morphine and codeine in food
KJ 201903 Rapid detection of barbiturates in health food by colloidal gold immunochromatography

British Standards Institution (BSI), Advantages of Chromatography

BS 6200-3.0:2002 Sampling and analysis of iron, steel and other ferrous metals - Methods of analysis - Reference methods of analysis - Summary of methods
BS EN 955-2:1995 Chemical analysis of refractory products - Products containing silica and/or alumina (wet method)
BS ISO 17470:2014 Microbeam analysis. Electron probe microanalysis. Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
BS DD ISO/TS 11308:2011 Nanotechnologies. Characterization of single-wall carbon nanotubes using thermogravimetric analysis
BS ISO 11536:2015 Iron ores. Determination of loss on ignition. Gravimetric method
BS 684-1.5:1987 Methods of analysis of fats and fatty oils - Physical methods - Determination of cloud point
BS ISO 22489:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy
BS ISO 22489:2016 Microbeam analysis. Electron probe microanalysis. Quantitative point analysis for bulk specimens using wavelength dispersive X-ray spectroscopy
BS ISO 22415:2019 Surface chemical analysis. Secondary ion mass spectrometry. Method for determining yield volume in argon cluster sputter depth profiling of organic materials
BS 684 Sec.1.5:1987 Methods of analysis of fats and fatty oils. Physical methods. Determination of cloud point
BS EN 71-11:2005 Safety of toys - Organic chemical compounds - Methods of analysis
BS ISO 20263:2017 Microbeam analysis. Analytical electron microscopy. Method for the determination of interface position in the cross-sectional image of the layered materials
BS ISO 24417:2022 Surface chemical analysis. Analysis of metallic nanolayers on iron based substrates by glow-discharge optical-emission spectrometry
BS 684 Sec.1.4:1976 Methods of analysis of fats and fatty oils. Physical methods. Determination of flow and drop points
BS ISO 23812:2009 Surface chemical analysis - Secondary-ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials
BS EN ISO 21079-2:2009 Chemical analysis of refractories containing alumina, zirconia, and silica. Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method). Wet chemical analysis
BS EN ISO 21079-2:2008 Chemical analysis of refractories containing alumina, zirconia, and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis (ISO 21079-2:2008)
21/30405786 DC BS ISO 24417. Surface chemical analysis. Analysis of metallic nanolayers on iron based substrates by glow-discharge optical-emission spectrometry
BS ISO 248-2:2012 Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
BS ISO 12963:2017 Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
BS ISO 12963:2017+A1:2020 Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
BS EN ISO 17353:2004 Water quality - Determination of selected organotin compounds - Gas chromatographic method
BS EN ISO 23161:2009 Soil quality. Determination of selected organotin compounds. Gas-chromatographic method
BS EN ISO 23161:2011 Soil quality. Determination of selected organotin compounds. Gas-chromatographic method
BS EN ISO 17353:2005 Water quality - Determination of selected organotin compounds - Gas chromatographic method
BS DD 257-4:2003 Methods of analysis of wood preservatives and treated timber. Quantitative analysis of cypermethrin in solutions of wood preservatives in organic solvents
BS ISO 29301:2017 Microbeam analysis. Analytical electron microscopy. Methods for calibrating image magnification by using reference materials with periodic structures
BS 684 Sec.1.8:1976 Methods of analysis of fats and fatty oils. Physical methods. Determination of smoke point
BS ISO 29301:2010 Microbeam analysis - Analytical transmission electron microscopy - Methods for calibrating image magnification by using reference materials having periodic structures
BS ISO 17109:2022 Surface chemical analysis. Depth profiling. Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter dept profiling using single and multi-layer thin…
BS 5766-22:2001 Methods for analysis of animal feeding stuffs. Determination of residues of organochlorine pesticides. Gas chromatographic method
20/30419851 DC BS ISO 12963 AMD1. Gas analysis. Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
BS EN ISO 6327:1987 Gas analysis - Determination of the water dew point of natural gas - Cooled surface condensation hygrometers
BS ISO 248-2:2019 Tracked Changes. Rubber, raw. Determination of volatile-matter content. Thermogravimetric methods using an automatic analyser with an infrared drying unit
BS ISO 17109:2015 Surface chemical analysis. Depth profiling. Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
BS 3762-3.5:1986 Analysis of formulated detergents - Quantitative test methods - Methods for determination of total organic matter content
BS DD 257-3:2003 Methods of analysis of wood preservatives and treated timber. Quantitative analysis of permethrin in solutions of wood preservatives in organic solvents
BS 684 Sec.1.6:1988 Methods of analysis of fats and fatty oils. Physical methods. Determination of titre
PD CEN/TS 17784-1:2022 Organo-mineral fertilizers. Identification of complexing agents.. Method using UV-Vis spectrophotometry and gravimetry
BS EN ISO 21571:2005 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Nucleic acid extraction
BS 7755-3.8:1995 Soil quality. Chemical methods. Determination of organic and total carbon after dry combustion (elementary analysis)
BS 5202-10:2001 Methods for chemical analysis of tobacco and tobacco products. Determination of organochlorine pesticide residues (gas chromatographic method)
BS 3762 Sec.4.1:1989 Analysis of formulated detergents. Physical test methods. Method for determination of clear point of liquid detergents
BS 3762 Sec.3.5:1986 Analysis of formulated detergents. Quantitative test methods. Methods for determination of total organic matter content
BS EN ISO 10111:2002 Metallic and other inorganic coatings. Measurement of mass per unit area. Review of gravimetric and chemical analysis methods
BS EN ISO 7827:2012 Water quality. Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium. Method by analysis of dissolved organic carbon (DOC)
BS EN ISO 21253-2:2019 Water quality. Multi-compound class methods - Criteria for the quantitative determination of organic substances using a multi-compound class analytical method
BS EN 17266:2019 Foodstuffs. Determination elements and their chemical species. Determination of organomercury in seafood by elemental mercury analysis
BS ISO 20341:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Method for estimating depth resolution parameters with multiple delta-layer reference materials

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Advantages of Chromatography

GB/T 5009.56-2003 Method for analysis of hygienic standard of pastry
GB/T 43087-2023 Method for determining the interface position in cross-sectional images of layered materials using microbeam analysis and electron microscopy
GB/T 20175-2006 Surface chemical analysis.Sputter depth profiling.Optimization using layered systems as reference materials
GB/T 17506-1998 The method of electron probe micro analysis as corrosive layer on ferrous metals of ship
GB/T 17506-2008 The analysis method of corrosive layer on ferrous metals of ship with EPMA
GB/T 22227-2008 Chemical products for industrial use.Determination of water solubility of solid and liquids with low solubility.Column elution method
GB/T 11895-1989 Water quality--Determination of benzo(alpha)-pyrene--Acetylated paper chromatography with fluorescence spectrophotometric method
GB/T 16587-1996 Fast gas chromatographic method for analyzing active ingredients of pesticides--Part 1: 12 kinds of pesticides
GB/T 22906.8-2008 Testing of cores.Part 8:Determination of natural frequency and flexural modulus by experimental modal analysis
GB/T 6609.26-2004 Chemical analysis methods and determination of physical performance of alumina Determination of absolute density-Pycnometer method
GB/T 20017-2005 Metallic and other inorganic coatings.Measurement of mass per unit area.Review of gravimetric and chemical analysis methods
GB/T 28971-2012 Cigarettes.Determination of tobacco specific N-nitrosamines in sidestream smoke.GC-TEA method
GB/T 11222.1-1989 Radiochemical analysis of strontium-90 in ash of biological samples--Extraction chromatography by di-(2-ethylhexyl) phosphate
GB/T 8971-1988 Analysis of Benzo(α)Dyrene in Airborne particulates matters by acctylated paper chromatography fluorescence spectrophotometric method

Korean Agency for Technology and Standards (KATS), Advantages of Chromatography

KS M 1995-2009 Determination of organic compounds emitted from plastics－Gas chromatographic method
KS D ISO 22489:2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy
KS M 7073-2016 Quantitative analysis method for mineral filler and mineral coating of paper
KS D ISO 10111-2012(2022) Metallic and other inorganic coatings－Measurement of mass per unit area－Review of gravimetric and chemical analysis methods
KS L 3415-2006(2016) Methods for chemical analysis of refractories containing alumina and magnesia
KS D ISO 3892:2002 Conversion coatings on metallic materials－Determination of coating mass per unit area－Gravimetric methods
KS M 3005-2002 Testing method for softening temperature of thermoplastic film and sheet by thermomechanical analysis
KS M ISO 248-2-2014(2019) Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
KS L ISO 21079-2:2012 Chemical analysis of refractories containing alumina, zirconia and silica－Refractories containing 5 % to 45 % of ZrO2(alternative to the X-ray fluorescence method)－Part 2：Wet chemical analysis
KS I ISO 10694:2005 Soil quality－Determination of organic and total carbon after dry combustion(elementary analysis)
KS M ISO 8502-6:2012 Preparation of steel substrates before application of paints and related products－Tests for the assessment of surface cleanliness－Part 6：Extraction of soluble contaminants for analysis－The Bresle method
KS L 3414-2006(2016) Methods for chemical analysis of refractories containing alumina, zirconia and silica
KS M 9235-2001 Water quality－Evaluation of “ultimate” aerobic biodegradablity of organic compounds in aqueous medium [Method by analysis of dissolved organic carbon(DOC)]
KS I ISO 7827-2008(2018) Water quality－Evaluation in an aqueous medium of the “ultimate”aerobic biodegradability of organic compounds－Method by analysis of dissolved organic carbon(DOC)
KS J ISO 21571:2006 Foodstuffs－Methods of analysis for the detection of genetically modified organisms and derived products－Nucleic acid extraction
KS J ISO 21569:2011 Foodstuffs－Methods of analysis for the detection of genetically modified organisms and derived products－Qualitative nucleic acid based methods
KS D ISO 20341-2005(2020) Surface chemical analysis－Secondary-ion mass spectrometry－Method for estimating depth resolution parameters with multiple delta-layer reference materials
KS D ISO 10111:2012 Metallic and other inorganic coatings－Measurement of mass per unit area－Review of gravimetric and chemical analysis methods
KS I ISO 7827:2008 Water quality－Evaluation in an aqueous medium of the “ultimate”aerobic biodegradability of organic compounds－Method by analysis of dissolved organic carbon(DOC)
KS D ISO 20341:2005 Surface chemical analysis－Secondary-ion mass spectrometry－Method for estimating depth resolution parameters with multiple delta-layer reference materials

Professional Standard - Electron, Advantages of Chromatography

SJ/Z 1096-1976 Typical methods for the analysis alloy coatings

Association Francaise de Normalisation, Advantages of Chromatography

NF X31-441:2011 Soil quality - Determination of selected organotin compounds - Gas-chromatographic method.
NF EN ISO 7579:2009 Colorants - Détermination de la solubilité dans les solvants organiques - Méthodes gravimétrique et photométrique
NF X21-006:2007 Microbeam analysis - Electron probe microanalysis - Quantitative point analysis for bulk specimens using wavelength-dispersive X-ray spectroscopy.
NF B30-104:1968 Glass. Analysis of seals of two glasses obtained by hot welding. (photo-elasticimetric method).
FD A06-500*FD CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
NF A91-125:2002 Metallic coatings and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods.
NF X50-100:2011 Value management - Functional analysis, basic characteristics - Functional analysis : Need (or external) functional analysis and technology/product (or internal) functional analysis - Requirements for deliverables and implementation approach.
NF X21-062*NF ISO 14606:2008 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
NF X20-105*NF ISO 12963:2017 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
NF A91-125*NF EN ISO 10111:2019 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
NF X21-066*NF ISO 23812:2009 Surface chemical analysis - Secondary ion mass spectrometry - Method for depth calibration for silicon using multiple delta-layer reference materials
NF EN ISO 21253-2:2019 Qualité de l'eau - Méthodes d'analyse de composés multi-classes - Partie 2 : critères pour la détermination quantitative de composés organiques avec une méthode d'analyse de composés multi-classes
NF A91-474:1995 CONVERSION COATINGS ON METALLIC MATERIALS. DETERMINATION OF COATING MASS PER UNIT AREA. GRAVIMETRIC METHODS. (EUROPEAN STANDARD EN ISO 3892).
NF S51-523*NF EN 71-11:2006 Safety of toys - Part 11 : organic chemical compounds - Methods of analysis
NF A91-474*NF EN ISO 3892:2001 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
NF T20-613:1967 Chemical analysis of organic products. Determination of iron. (2.2'bipyridyl spectrophotometric method).
NF M07-090*NF EN 14077:2004 Petroleum products - Determination of organic halogen content - Oxidative microcoulometric method.
FD ISO/TR 22335:2008 Analyse chimique des surfaces - Profilage en profondeur - Mesurage de la vitesse de pulvérisation : méthode par empreinte de grille au moyen d'un profilomètre à stylet mécanique
NF X20-530:1984 Natural gas. Determination of water and methanol contents. Gas chromatographic method.
NF H60-147*NF EN 14047:2003 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxyde
NF T73-289*NF EN 14667:2005 Surface active agents - Determination of low boiling solvents in liquid formulations - Gas chromatographic method
NF B49-424-2*NF EN ISO 21079-2:2008 Chemical analysis of refractories containing alumina, zirconia, and silica - Refractories containing 5 % to 45 % of ZrO2 (alternative to the X-ray fluorescence method) - Part 2 : Wet chemical analysis
NF T90-128*NF EN 12918:1999 Water quality - Determination of parathion, parathion-methyl and some other organophosphorous compounds in water by dichloromethane extraction and gas chromatographic analysis.
NF X43-272-1*NF ISO 16200-1:2001 Workplace air quality - Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography - Part 1 : pumped sampling method.
NF U44-164:2014 Organic soil improvers and growing media - Analytical method for inert components - Bleach washing method
NF EN 12698-2:2008 Analyse chimique des produits réfractaires contenant du carbure de silicium lié au nitrure - Partie 2 : méthodes de DRX
NF ISO 12963:2017 Analyse des gaz - Méthodes de comparaison pour la détermination de la composition des mélanges de gaz basées sur un ou deux points d'étalonnage
XP U42-761-1*XP CEN/TS 17784-1:2022 Organo-mineral fertilizers - Identification of complexing agents - Part 1 : method using UV-Vis spectrophotometry and gravimetry
XP CEN/TS 17784-1:2022 Engrais organo-minéraux - Identification des agents complexants - Partie 1 : méthode utilisant la spectrophotométrie UV-Vis et la gravimétrie
NF V03-022*NF EN ISO 21569:2006 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Qualitative nucleic acid based methods
NF V04-172-2*NF EN ISO 14673-2:2004 Milk and milk products - Determination of nitrate and nitrite contents - Part 2 : method using segmented flow analysis (Routine method).
NF H60-146*NF EN 14046:2003 Packaging - Evaluation ot the ultimate aerobic biodegradability of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide
NF X31-409*NF ISO 10694:1995 Soil quality. Determination of organic and total carbon after dry combustion (elementary analysis).
NF V03-023*NF EN ISO 21571:2005 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Nucleic acid extraction
NF V37-011/A1:2011 Cigarettes - Determination of water in smoke condensates - Part 1 : gas-chromatographic method - Amendment 1.
NF X20-105/A1*NF ISO 12963/A1:2021 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration - AMENDMENT 1 : correction to Formula 5
NF T90-312:1996 "Water quality. Evaluation in an aqueous medium of the ""ultimate"" aerobic biodegradability of organic compounds. Method by analysis of dissolved organic carbon (doc).".
NF X31-408*NF ISO 11264:2008 Soil quality - Determination of herbicides - Method using HPLC with UV-detection
NF T90-312*NF EN ISO 7827:2013 Water quality - Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium - Method by analysis of dissolved organic carbon (DOC)
NF EN 1071-4:2006 Céramiques techniques avancées - Méthodes d'essai pour revêtements céramiques - Partie 4 : détermination de la composition chimique par microanalyse avec sonde électronique (MASE)

能源, Advantages of Chromatography

NB/T 10020-2015 Coalbed methane sampling and component analysis methods

International Organization for Standardization (ISO), Advantages of Chromatography

ISO 17470:2004 Microbeam analysis - Electron probe microanalysis - Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
ISO 15366:1999 Nuclear energy - Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and dilution analysis by solvent chromatography
ISO 29301:2017 Microbeam analysis - Analytical electron microscopy - Methods for calibrating image magnification by using reference materials with periodic structures
ISO 14606:2000 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
ISO 14606:2015 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
ISO 5515:1979 Fruits, vegetables and derived products; Decomposition of organic matter prior to analysis; Wet method
ISO 10111:2000 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
ISO/CD 20263:2023 Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials
ISO 20263:2017 Microbeam analysis — Analytical electron microscopy — Method for the determination of interface position in the cross-sectional image of the layered materials
ISO 4389:1997/Cor 1:1998 Tobacco - Determination of organochlorine pesticide residues - Gas chromatographic method; Technical Corrigendum 1
ISO 29301:2010 Microbeam analysis - Analytical transmission electron microscopy - Methods for calibrating image magnification by using reference materials having periodic structures
ISO 5516:1978 Fruits, vegetables and derived products; Decomposition of organic matter prior to analysis; Ashing method
ISO 24417:2022 Surface chemical analysis — Analysis of metallic nanolayers on iron based substrates by glow-discharge optical-emission spectrometry
ISO 3892:1980 Conversion coatings on metallic materials; Determination of coating mass per unit area; Gravimetric methods
ISO 7827:1984 Water quality; Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds; Method by analysis of dissolved organic carbon (DOC)
ISO 12963:2017 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration
ISO/FDIS 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures
ISO 29301:2023 Microbeam analysis — Analytical electron microscopy — Methods for calibrating image magnification by using reference materials with periodic structures
ISO 248-2:2019 Rubber, raw — Determination of volatile-matter content — Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
ISO 248-2:2012 Rubber, raw - Determination of volatile-matter content - Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
ISO 17109:2015 Surface chemical analysis - Depth profiling - Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films
ISO/TS 12828-3:2020 Validation method for fire gas analysis — Part 3: Considerations related to interlaboratory trials
ISO/TS 11308:2011 Nanotechnologies - Characterization of single-wall carbon nanotubes using thermogravimetric analysis
ISO 15788-1:1999 Animal and vegetable fats and oils - Determination of stigmastadienes in vegetable oils - Part 1: Method using capillary-column gas chromatography (Reference method)
ISO/TR 23173:2021 Surface chemical analysis - Electron spectroscopies - Measurement of the thickness and composition of nanoparticle coatings
ISO 12963:2017/Amd 1:2020 Gas analysis - Comparison methods for the determination of the composition of gas mixtures based on one- and two-point calibration - Amendment 1: Correction to Formula 5
ISO 10694:1995 Soil quality - Determination of organic and total carbon after dry combustion (elementary analysis)
ISO 1460:1973 Metallic coatings — Hot dip galvanized coatings on ferrous materials — Determination of the mass per unit area — Gravimetric method
ISO 1460:2020 Metallic coatings — Hot dip galvanized coatings on ferrous materials — Determination of the mass per unit area — Gravimetric method
ISO 14673-2:2001 Milk and milk products - Determination of nitrate and nitrite contents - Part 2: Method using segmented flow analyses (Routine method)
ISO 14673-2:2004 Milk and milk products - Determination of nitrate and nitrite contents - Part 2: Method using segmented flow analysis (Routine method)
ISO 14673-2:2004|IDF 189-2:2004 Determination of nitrate and nitrite content in milk and dairy products Part 2: Stratified flow analysis method (conventional method)
ISO 7827:1994 Water quality - Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds - Method by analysis of dissolved organic carbon (DOC)
ISO 21571:2005 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Nucleic acid extraction
ISO 21569:2005 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Qualitative nucleic acid based methods
ISO 5496:1992 Sensory analysis; methodology; initiation and training of assessors in the detection and recognition of odours
ISO 7827:2010 Water quality - Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium - Method by analysis of dissolved organic carbon (DOC)
ISO/IEC 24570:2005 Software engineering - NESMA functional size measurement method version 2.1 - Definitions and counting guidelines for the application of Function Point Analysis
ISO/IEC 24570:2018 Software engineering - NESMA functional size measurement method - Definitions and counting guidelines for the application of function point analysis
ISO 21569:2005/Amd 1:2013 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Qualitative nucleic acid based methods; Amendment 1
ISO 21570:2005/Amd 1:2013 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Quantitative nucleic acid based methods; Amendment 1
ISO 20341:2003 Surface chemical analysis - Secondary-ion mass spectrometry - Method for estimating depth resolution parameters with multiple delta-layer reference materials

CZ-CSN, Advantages of Chromatography

CSN 56 0130-2-1995 Methods of confectioner's products analysis - Part 2: Sampling
CSN 56 0130-5-1995 Methods of confectione?s products analysis - Part 5: Detennination of sugars
CSN 56 0130-1-1995 Methods of confectioner's products analysis - Part 1: General guidance
CSN 56 0130-7-1995 Methods of confectione?s products analysis - Part 7: Detenninatíon of titratable acids
CSN 42 0602-1985 Non-ferrous metals and alloys. General requirements for methods of chemical analysis
CSN 68 4141-1989 Pure chemicals. Thin-layer chromato- raphy. General instructions for arrying out estimations.
CSN 56 0130-4-1995 Methods of confectione?s products anafysis - Part 4: Determination of ash and its part insoluble in acid
CSN 38 5554-1988 Gaseous fuels Determination of odorants by gas chromatography

European Committee for Standardization (CEN), Advantages of Chromatography

EN 16158:2012 Animal feeding stuffs - Determination of semduramicin content - Liquid chromatographic method using a "tree" analytical approach
EN 71-9:2005+A1:2007 Safety of toys - Part 9: Organic chemical compounds - Requirements
CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
EN ISO 10111:2001 Metallic and Other Inorganic Coatings - Measurement of Mass Per Unit Area - Review of Gravimetric and Chemical Analysis Methods ISO 10111:2000
EN ISO 3892:1994 Conversion Coatings on Metallic Materials - Determination of Coating Mass per Unit Area - Gravimetric Methods (ISO 3892 : 1980)
EN ISO 3892:2001 Conversion Coatings on Metallic Materials - Determination of Coating Mass Per Unit Area - Gravimetric Methods ISO 3892:2000
EN ISO 7827:1995 Water Quality - Evaluation in an Aqueous Medium of the 碪ltimate?Aerobic Biodegradability of Organic Compounds - Method by Analysis of Dissolved Organic Carbon (DOC)
EN ISO 14673-2:2004 Milk and milk products Determination of nitrate and nitrite contents Part 2: Method using segmented flow analysis (Routine method) ISO 14673-2:2004
EN 16939:2017 Animal feeding stuffs: Methods of sampling and analysis - Detection of tylosin@ spiramycin and virginiamycin - Thin Layer Chromatography and bioautography

German Institute for Standardization, Advantages of Chromatography

DIN EN ISO 6327:2008 Gas analysis - Determination of the water dew point of natural gas - Cooled surface condensation hygrometers (ISO 6327:1981); English version of DIN EN ISO 6327:2008-04
DIN EN ISO 7579:2010-03 Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009); German version EN ISO 7579:2009
DIN 53174-2:1992 Solvents for paints, varnishes and similar coating materials; methods of analysis for solvent mixtures; gas chromatographic method
DIN 10741:2010-08 Analysis of honey - General guidelines for the ad hoc validation of analysis methods for organic residues or contaminants
DIN 10741:2010 Analysis of honey - General guidelines for the ad hoc validation of analysis methods for organic residues or contaminants
DIN V 50993-3:2008 Determination of hexavalent chromium in corrosion protection coatings - Part 3: Qualitative analysis - Spot-test
DIN EN 16158:2012 Animal feeding stuffs - Determination of semduramicin content - Liquid chromatographic method using a "tree" analytical approach; German version EN 16158:2012
DIN EN ISO 10111:2019-04 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019); German version EN ISO 10111:2019
DIN 55683:1994 Solvents for paints and varnishes - Determination of the solvents in coating materials containing organic solvents only - Gaschromatographic method
DIN 10373 Berichtigung 1:2005 Analysis of tobacco and tobacco products - Determination of nicotine content - Gaschromatographic method, Corrigenda to DIN 10373:2003-01
DIN EN ISO 10111:2019 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019)
DIN EN ISO 10111:2018 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO/DIS 10111:2018); German and English version prEN ISO 10111:2018
DIN EN ISO 21079-2:2008 Chemical analysis of refractories containing alumina, zirconia and silica - Refractories containing 5 % to 45 % of ZrO<(Index)2> (alternative to the X-ray fluorescence method) - Part 2: Wet chemical analysis (ISO 21079-2:2008); German version EN ISO 21079
DIN EN ISO 3892:2001-12 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:2000); German version EN ISO 3892:2001
DIN EN 12918:1999 Water quality - Determination of parathion, parathion-methyl and some other organophosphorus compounds in water by dichloromethane extraction and gas chromatographic analysis; German version EN 12918:1999
DIN CEN/TS 17784-1:2022-07 Organo-mineral fertilizers - Identification of complexing agents - Part 1: Method using UV-Vis spectrophotometry and gravimetry; German version CEN/TS 17784-1:2022
DIN EN ISO 14673-2:2004 Milk and milk products - Determination of nitrate and nitrite contents - Part 2: Method using segmented flow analysis (Routine method) (ISO 14673-2:2004); German version EN ISO 14673-2:2004
DIN CEN/TS 15568:2007 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Sampling strategies; German version CEN/TS 15568:2006
DIN EN 17294:2019 Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by lon Chromatography with Conductivity Detection (IC-CD)
DIN 50988-2:1988 Measurement of coating thickness; determination of the mass per unit area of zinc and tin-coatings on ferrous materials by dissolution of the coating material; volumetric method

Shandong Provincial Standard of the People's Republic of China, Advantages of Chromatography

DB37/T 4154-2020 Determination of water quality odor Olfactory hierarchy analysis method (FPA method)

KR-KS, Advantages of Chromatography

KS D ISO 22489-2018 Microbeam analysis — Electron probe microanalysis — Quantitative point analysis for bulk specimens using wavelength dispersive x-ray spectroscopy

RU-GOST R, Advantages of Chromatography

GOST 26712-1994 Organic fertilizers. General requirements for methods of analysis
GOST 25086-1987 Nonferrous metals and their alloys. General requirements for methods of analysis
GOST 9717.2-1982 Copper. Method of spectral analysis of metal standart specimens with photographic registration of spectrum
GOST 27329-1987 Ores and concentrates of non-ferrous metals. General requirements for methods of chemical analysis
GOST 30536-2013 Vodka and ethanol from food raw material. Gas-chromatographic express-method for determination of toxic microadmixtures content
GOST 30536-1997 Vodka and ethanol. Gazochromatography method for determination of toxic microadmixtures content
GOST R 53244-2008 Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. Quantitative nucleic acid based methods
GOST 20068.1-1979 Tinless bronze. Method of spectral analysis of metal standard specimens with spectrum photographic record
GOST 20068.2-1979 Tinless bronze. Method of spectral analysis of metal standard specimens with spectrum photo-electric record
GOST 16923-1983 Organic products. Preparation of standard solutions for analyses by diazotization and combination methods
GOST 20068.3-1979 Tinless bronze. Method of spectral analysis of oxide standard specimens with spectrum photographic record
GOST 20841.8-1979 Silicon organic products. Gas chromatographic method for determination aril-alkylarilchlorsilanes composition
GOST R ISO 16200-1-2007 Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Part 1. Pumped sampling method
GOST R ISO 16200-2-2007 Workplace air quality. Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography. Part 2. Diffusive sampling method
GOST 14180-1980 Ores and concentrates of non-ferrous metals. Methods for sampling and preparation of samples for chemical analysis and determination of moisture

American Society for Testing and Materials (ASTM), Advantages of Chromatography

ASTM B767-88(2006) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B767-88(1994) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B767-88(2001) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM B767-88(2016) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM E2610-08 Standard Test Method for Sensory Analysisx2014;Duo-Trio Test
ASTM B767-88(2010) Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures
ASTM C1718-10 Standard Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning
ASTM UOP832-83 Carbon Structure of C9 and Lower Boiling Hydrocarbons by Gas Chromatography
ASTM D6806-02 Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography
ASTM D6806-02(2007)e1 Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography
ASTM D6806-02(2012) Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography
ASTM E351-18 Standard Test Methods for Chemical Analysis of Cast Iron—All Types
ASTM D452/D452M-19(2022) Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
ASTM E2092-00 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-04 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D6286-98(2006) Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
ASTM D6286-98 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
ASTM E2092-03 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D7871-19 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)
ASTM D7871-18 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)
ASTM D7871-23 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)
ASTM D5473/D5473M-15 Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer
ASTM UOP389-09 Trace Metals in Organics by Wet Ashing - ICP-OES
ASTM UOP389-09a Trace Metals in Organics by Wet Ashing - ICP-OES
ASTM D2699-04 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
ASTM D2699-04a Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
ASTM D2699-04e1 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
ASTM D7215-22 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
ASTM D4106-96 Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
ASTM D820-93(2023) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
ASTM E2403-06(2018) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2092-23 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM B975-15 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM E1765-16(2023) Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes
ASTM D7871-13 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)
ASTM D4106-96(2008) Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
ASTM D7215-08(2013) Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
ASTM D7215-16 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
ASTM D7215-08 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
ASTM E2403-04 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2403-06 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E2403-06(2012) Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
ASTM E1765-16 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes
ASTM D5590-94 Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM D5590-00 Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM D5590-00(2005) Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM D5590-00(2010) Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
ASTM E1914-98 Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis
ASTM E1914-98(2003) Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis
ASTM E2092-09 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
ASTM D3687-19 Standard Test Method for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
ASTM D4105-96(2002) Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
ASTM D4105-96 Standard Test Method (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
ASTM D5352-95(2012) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
ASTM D451/D451M-17(2022) Standard Test Method for Sieve Analysis of Granular Mineral Surfacing for Asphalt Roofing Products
ASTM D3687-01 Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
ASTM D3687-95 Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
ASTM D3687-07(2012) Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
ASTM B975-18e1 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM B975-18 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM D4105/D4105M-15e1 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
ASTM E60-98(2004) Standard Practice for Analysis of Metals, Ores, and Related Materials by Molecular Absorption Spectrometry
ASTM E60-98 Standard Practice for Analysis of Metals, Ores, and Related Materials by Molecular Absorption Spectrometry
ASTM D5270/D5270M-20 Standard Practice for (Analytical Procedures) Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
ASTM D5920-96 Standard Test Method [Analytical Procedure] for Tests of Anisotropic Unconfined Aquifers by Neuman Method
ASTM D5920-96(2005) Standard Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by Neuman Method
ASTM E1659-05 Standard Test Methods Coating Weight and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
ASTM E1659-12 Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet
ASTM B975-22 Standard Test Method for Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
ASTM E1915-05 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
ASTM E1915-99 Standard Test Method for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
ASTM E1915-01 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
ASTM E485-94(1999)e1 Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique
ASTM E2769-22 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM E485-94(2005) Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique
ASTM D6806-02(2022) Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography
ASTM E2399-05 Standard Test Method for Maximum Media Density for Dead Load Analysis of Green Roof Systems
ASTM D3687-07 Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method
ASTM E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
ASTM D5785-95(2013) Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
ASTM E1915-09 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics
ASTM D5808-03 Standard Test Method for Determining Organic Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
ASTM D7504-12 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM D6029-96 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
ASTM D6029-17 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
ASTM D126-87(2023) Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green
ASTM E1086-08 Standard Test Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique
ASTM D5296-11 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
ASTM D7504-15e1 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
ASTM UOP990-11 Organic Analysis of Distillate by Comprehensive Two-Dimensional Gas Chromatography with Flame Ionization Detection

Group Standards of the People's Republic of China, Advantages of Chromatography

T/CIS 11005-2023 Real-time determination of the start point and end point of column chromatography elution in traditional Chinese medicine production process —Near infrared spectroscopy
T/CITS 0002-2021 Detection of heavy mental cadmium in grain—Time-resolved fluorescent immunochromatographic method
T/CITS 0001-2021 Detection of heavy mental plumbum in grain—Time-resolved fluorescent immunochromatographic method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Advantages of Chromatography

GB/T 5832.2-2016 Gas analysis—Determination of water—Part 2: Dew point method

AGMA - American Gear Manufacturers Association, Advantages of Chromatography

06FTM06-2006 An Analytical Approach to the Prediction of Micropitting on Case Carburised Gears
2000FTM12-2000 Finite Strips Methods as an Alternative to the Finite Elements in Gear Tooth Stress and Strain Analysis
08FTM02-2008 A Methodology for Identifying Defective Cycloidal Reduction Components Using Vibration Analysis and Techniques
11FTM28-2011 Simulation of Wear for High Contact Ratio Gear - A Mixed FE and Analytical Approach

IN-BIS, Advantages of Chromatography

GOSTR, Advantages of Chromatography

GOST 25086-2011 Non-ferrous metals and their alloys. General requirements for methods of analysis
GOST 9717.2-2018 Copper. Method of spectral analysis by metal standard specimens with photographic registration of spectrum
GOST R 58138-2018 Organic fertilizers. Methods of parasitological analysis. Methods for determination of larvae of synanthropic flies
GOST R 57782-2017 Organic fertilizers. Methods parasitological analysis. Methods for determination of oocysts and cysts of parasitic protozoa

江西省市场监督管理局, Advantages of Chromatography

DB36/Z 001-2022 Detection of Carbofuran in Vegetables and Fruits Quantum Dot Microsphere Fluorescence Immunochromatography
DB36/Z 002-2022 Quantum dot microsphere fluorescence immunochromatography for detection of amantadine in animal-derived foods

IT-UNI, Advantages of Chromatography

UNI 3658-1955 Procedures for chemical analysis of minerals. Determination of titanium in iron ore. Photometric and colorimetric methods for disaggregation with sodium peroxide.
UNI 6878-1971
UNI 6968-1971
UNI 6553-1969

Xinjiang Provincial Standard of the People's Republic of China, Advantages of Chromatography

DB65/T 602.5-2001 The determinanation of available phosphous in soil
DB65/T 602.13-2001 The determinanation of available zinc、manganese、copper and iron in soil

PL-PKN, Advantages of Chromatography

PN C04951-1986 Chemical analysis Determination of optical rotation of organie compounds
PN EN 10178-1993 Chemical analysis of ferrous materials Determination of niobium in steels Spectrophotometric method
PN EN 10179-1992 Chemical analysis of ferrous materials. Determination of nitrogen (trace amounts) in steels. Spectrophotometric method
PN EN 24943-1992 Chemical analysis of ferrous metal. Determination of copper content. Flame atomic absorption spectrometric method
PN EN 10181-1992 Chemical analysis of ferrous materials. Determination of lead in steels. Flame atomic absorption spectrometric method
PN EN 10177-1993 Chemical analysis of ferrous materials Determination of calcium in steels Flame atomie absorption spectrometric method
PN EN 10136-1992 Chemical analysis of ferrous materials. Determination of knickel in steels and irons. Flame atomic absorption spectrometric method
PN EN 10188-1992 Chemical analysis of ferrous materials Determination of chromi um in steels and irons Flame atomie absorption spectrometric inethod

TR-TSE, Advantages of Chromatography

TS 2627-1977 Methods FSr The Analys?s Of Water Determination Of Organochlorine Pesticides Content
TS 3245-1978 Methods For The Analysis Of Ceramic Whiteware Clays - Determination Of Moisture And Loss On Ignition Contents

Japanese Industrial Standards Committee (JISC), Advantages of Chromatography

JIS H 1405:2001 Methods for chemical analysis of thoriated tungsten materials
JIS H 1405:2016 Methods for chemical analysis of thoriated tungsten materials
JIS Z 3184:2003 Method of preparing deposited metal pad and samples for chemical analysis
JIS H 7802:2005 Testing method of ultrafine metal particles for ignition temperature by differential thermal analysis
JIS R 9301-3-2:1999 Alumina powder -- Part 3: Methods of chemical analysis -- 2: Determination of loss of mass by ignition
JIS K 5601-2-2:1999 Testing methods for paint components -- Part 2: Component analysis in solvent soluble matter -- Section 2: Softening point (Ring and ball method)
JIS B 7989:2008 Measuring method for volatile organic compounds in flue gas by analyzers
JIS K 0146:2002 Surface chemical analysis -- Sputter depth profiling -- Optimization using layered systems as reference materials
JIS K 5601-4-2:2008 Testing methods for paint components -- Part 4 : Analysis for components emitted from film -- Section 2 : Volatile organic compounds
JIS K 0156:2018 Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth calibration for silicon using multiple delta-layer reference materials
JIS A 1481-3:2014 Determination of asbestos in building material products -- Part 3: Quantitative analysis of containing asbestos by X-ray diffraction method

API - American Petroleum Institute, Advantages of Chromatography

API PUBL 308-1992 ANALYSIS OF AIR TOXIC-HOTSPOTS (AB-2588) DATA FOR ELEVEN CALIFORNIA REFINERIES

Professional Standard - Commodity Inspection, Advantages of Chromatography

SN/T 3126-2012 Determination of sulfated ash of organic materials.Thermogravimetry
SN/T 3128-2012 Determination of oxygen element in organic chemicals.Elemental analyzer method
SN/T 3005-2011 Test method for instrumental determination of carbon,hydrogen,nitrogen and sulfur in organic chemicals
SN/T 2297.2-2009 Chemical analysis method for the imported and exported gypsum and gypsum products.Part 2:Determination of organic content by the loss on ignition

CU-NC, Advantages of Chromatography

NC 93-15-1986 Community Hygiene. Determination of Organic Matter in Soils. Analysis Method

BE-NBN, Advantages of Chromatography

NBN-EN 23907-1993 Hardmetals. Determination of total carbon content. Gravimetric method (ISO 3907: 1985)
NBN T 91-255-1976 Water analysis methods - Determination of the ammoniacal and organic nitrogen - (Kjeldahl nitrogen)
NBN-EN ISO 2177:1995 Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution (ISO 2177:1985)
NBN T 03-351-1981 Crude sodium borates for industrial use - Determination of total aluminium content - Titrimetric method
NBN T 52-020-1990 Analyse van vloeibare aardoliekoolwaterstoffen - Gaschromatografische analyse - Bepaling van deorganische zuurstofverbindingen en van de organisch gebonden zuurstof met behulp van een zuurstof-specifieke detector (O-FID)
NBN EN ISO 3892:1995 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods (ISO 3892:1980)
NBN T 03-369-1988 Crude sodium borates for industrial use - Determination of total and alkali-soluble calcium and magnesium contents - Titrimetric method

WRC - Welding Research Council, Advantages of Chromatography

BULLETIN 356-1990 FINITE ELEMENT MODELLING OF A SINGLE PASS WELD ; FINITE ELEMENT ANALYSIS OF MULTI-PASS WELDS ; THERMAL AND MECHANICAL SIMULATIONS OF RESISTANCE SPOT WELDING

Danish Standards Foundation, Advantages of Chromatography

DS/CEN/TR 10350:2013 Analysis of steels and irons - Internal laboratory procedure for checking the accuracy of an analytical method by using Certified Reference Materials
DS/EN ISO 10111:2002 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
DS/ISO 3892:1983 Conversion coatings on metallic materials. Determination of coating mass per unit area. Gravimetric methods
DS/ISO 7827:1988 Water quality. Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds. Method by analysis of dissolved organic carbon (DOC)
DS/ISO 1460:1980 Metallic coatings. Hot dip galvanized coatings on ferrous materials. Determination of the mass per unit area. Gravimetric method

CEN - European Committee for Standardization, Advantages of Chromatography

EN ISO 10111:2019 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods
EN ISO 14673-2:2001 Milk and Milk Products - Determination of Nitrate and Nitrite Contents - Part 2: Method Using Segmented Flow Analysis (Routine Method)
EN ISO 7827:2012 "Water quality - Evaluation of the ""ready""@ ""ultimate"" aerobic biodegradability of organic compounds in an aqueous medium - Method by analysis of dissolved organic carbon (DOC)"

Standard Association of Australia （SAA）, Advantages of Chromatography

AS ISO 14606:2006 Surface chemical analysis - Sputter depth profiling - Optimization using layered systems as reference materials
AS 2331.1.2:2001 Methods of test for metallic and related coatings - Local thickness tests - Coulometric method
AS/NZS ISO/IEC 24570:2022 Software engineering — NESMA functional size measurement method — Definitions and counting guidelines for the application of function point analysis
AS 2331.2.1:2001 Methods of test for metallic and related coatings - Tests for average coating mass per unit area or for thickness Dissolution methods - Strip and weigh and analytical

Professional Standard - Electricity, Advantages of Chromatography

DL/T 1358-2014 Analytical methods of steam and water in power plants determination of total organic carbon
DL/T 502.28-2006 Analytical methods of steam and water in power plants Part 28: Determination of organic matter (Ultraviolet spectrophotometry)

Professional Standard - Nuclear Industry, Advantages of Chromatography

EJ/T 315-1988 Analytical method for environment-related accidents in pressurized water reactor nuclear power plants

未注明发布机构, Advantages of Chromatography

BS 684-1.4:1976(1999) Methods of analysis of Fats and fatty oils — Part 1 : Physical methods — Section 1.4 : Determination of flow and drop points
BS 684-1.8:1976(2009) Methods of analysis of Fats and fatty oils — Part 1 : Physical methods — Section 1.8 : Determination of smoke point
BS 684-1.5:1987(2011) Methods of analysis of Fats and fatty oils — Part 1 : Physical methods — Section 1.5 Determination of cloud point
BS 5666-4:1979(2008) Methods of analysis of Wood preservatives and treated timber — Part 4 : Quantitative analysis of preservatives and treated timber containing copper naphthenate
BS 4551:2005+A2:2013(2014) Mortar — Methods of test for mortar and screed — Chemical analysis and physical testing
BS 5666-7:1991(2008) Methods of analysis of Wood preservatives and treated timber — Part 7 : Quantitative analysis of preservatives containing bis (tri - n - butyltin) oxide : determination of total tin
BS 3762-4.1:1989(2011) Analysis of formulated detergents — Part 4 : Physical test methods — Section 4.1 Method for determination of clear point of liquid detergents
BS 3762-3.5:1986(2008) Analysis of formulated detergents — Part 3 : Quantitative test methods — Section 3.5 Methods for determination of total organic matter content
BS EN 955-2:1995(1999) Chemical analysis of refractory products — Part 2 : Products containing silica and / or alumina (wet method)
BS EN 17266:2019(2020) Foodstuffs — Determination elements and their chemical species — Determination of organomercury in seafood by elemental mercury analysis

SE-SIS, Advantages of Chromatography

SIS 11 77 90-1974 Methods for analysis of aluminium oxide. International recommendations'lstandards' validity as Swedish standard
SIS SS-EN 10 178-1989 Chemical analysis of ferrous materials — Determination of niobium in steels — Spectrophotometric method
SIS SS-EN 10 200-1992 Chemical analysis of ferrous materials — Determination of boron in steel — Spectrophotometric method
SIS SS-ISO 3892:1983 Conversion coatings on metallic ma- terials - Determination of coating m?ss per unit area - Gravimetric methods
SIS SS-EN 10 184-1990 Chemical analysis of ferrous materials — Determination of phosfor in steels and irons — Spectrophotometric method
SIS SS-EN 10 179-1989 Chemical analysis of ferrous materials — Determination of nitrogen (trace amounts) in steel — spectrophotometric method
SIS SS 11 77 85-1979 Methods for analysis of hardmetals — International standards' validity as Swedish standard
SIS SS-EN 10 071-1989 Chemical analysis of ferrous materials — Determination of manganese in steels and irons — Electrometric titration method
SIS SS-EN 24 943-1991 Chemical analysis of ferrous metal — Deter- mination of copper content — Flame atomic absorption spectrometric method
SIS SS-EN 10 181-1989 Chemical analysis of ferrous materials — Determination of lead in steels — Flame atomic absorption spectrometric method
SIS SS-EN 10 188-1990 Chemical analysis of ferrous materials — Determination of chromium in steels and irons — Flame atomic absorption spectro- metric method
SIS SS-EN 10 177-1989 Chemical analysis of ferrous materials — Determination of calcium in steels — Flame atomic absorption spectrometric method
SIS SS-EN 10 136-1989 Chemical analysis of ferrous materials — Determination of nickel in steels and irons — Flame atomic absorption spectrometric method

ES-UNE, Advantages of Chromatography

UNE-EN ISO 10111:2020 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2019)
UNE-CEN/TS 17784-1:2022 Organo-mineral fertilizers - Identification of complexing agents - Part 1: Method using UV-Vis spectrophotometry and gravimetry (Endorsed by Asociación Española de Normalización in May of 2022.)

Professional Standard - Public Safety Standards, Advantages of Chromatography

GA/T 101-1995 Qualitative and quantitative analysis method of organophosphorus pesticides in poisoned samples
GA 101-1995 Qualitative and quantitative analysis methods for organic phosphorous pesticides in case samples

YU-JUS, Advantages of Chromatography

JUS H.F8.302-1988 Natural gas. Determlnation of the nater dew point of natural gas. Coole? surface condBttsation hygrometers

ZA-SANS, Advantages of Chromatography

SANS 3892:2000 Conversion coatings on metallic materials - Determination of coating mass per unit area - Gravimetric methods
SANS 5550:1993 Potency of antibiotics - Microbiological agar diffusion method of assay (two-point technique)
SANS 24570:2005 Software engineering - NESMA functional size measurement method version 2.1 - Definitions and counting guidelines for the application of Function Point Analysis

Lithuanian Standards Office , Advantages of Chromatography

LST EN ISO 10111:2003 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods (ISO 10111:2000)
LST ISO 5515:1999 Fruits, vegetables and derived products. Decomposition of organic matter prior to analysis. Wet method (idt ISO 5515:1979)
LST ISO 5516:1999 Fruits, vegetables and derived products. Decomposition of organic matter prior to analysis. Ashing method (idt ISO 5516:1978)

AENOR, Advantages of Chromatography

UNE-EN ISO 10111:2002 Metallic and other inorganic coatings - Measurement of mass per unit area - Review of gravimetric and chemical analysis methods. (ISO 10111:2000)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Advantages of Chromatography

GJB 5381.7-2005 Methods of chemical analysis for pyrotech. Part 7: Determination of organic compound content. Weighing method
GJB 5381.4-2005 Methods of chemical analysis for pyrotech. Part 4: Extract organic compound from sample and residuum. Organic solvent extraction method

Military Standard of the People's Republic of China-General Armament Department, Advantages of Chromatography

GJB 8682.7-2015 Methods of chemical analysis of pyrotechnics Part 7: Determination and weighing method of organic content
GJB 8682.4-2015 Methods for chemical analysis of pyrotechnics Part 4: Extraction of organic matter in samples and residues Organic solvent extraction method

The American Road & Transportation Builders Association, Advantages of Chromatography

AASHTO T 339-2010 Standard Method of Test for Analysis of Structural Steel Coatings for Isocyanate Content

AASHTO - American Association of State Highway and Transportation Officials, Advantages of Chromatography

T 339-2009 Standard Method of Test for Analysis of Structural Steel Coatings for Isocyanate Content
TP 67-2006 Standard Method of Test for Analysis of Structural Steel Coatings for Isocyanate Content
T 339-2010 Standard Method of Test for Analysis of Structural Steel Coatings for Isocyanate Content
TP 67-2003 Standard Method of Test for Analysis of Structural Steel Coatings for Isocyanate Content
TP 67-2005 Standard Method of Test for Analysis of Structural Steel Coatings for Isocyanate Content
TP 66-2005 Standard Method of Test for Analysis of Structural Steel Coatings for Hindered Amine Light Stabilizer (HALS)
TP 66-2006 Standard Method of Test for Analysis of Structural Steel Coatings for Hindered Amine Light Stabilizer (HALS)
T 338-2009 Standard Method of Test for Analysis of Structural Steel Coatings for Hindered Amine Light Stabilizer (HALS)
TP 66-2003 Standard Method of Test for Analysis of Structural Steel Coatings for Hindered Amine Light Stabilizer (HALS)

NL-NEN, Advantages of Chromatography

NEN 6646-1990 Water - Photometric determination of the content of ammonium nitrogen and of the sum of the contents of ammoniacal and organically bound nitrogen according to Kjeldahl by continuous flow analysis

工业和信息化部, Advantages of Chromatography

YS/T 575.21-2020 Methods of chemical analysis of bauxite ores Part 21: Determination of organic carbon content

Professional Standard - Non-ferrous Metal, Advantages of Chromatography

YS/T 575.21-2007 Methods for chemical analysis of bauxite.Part 21:Determination of organic carbon content.Titrimetric method
YS/T 358.1-2011 Methods for chemical analysis of tantalite,columbite concentrate.Part 1:Determination of tantalum and niobium content.Gravimatric of paper chromatography method

ESDU - Engineering Sciences Data Unit, Advantages of Chromatography

ESDU 91013 A-2011 Methods for improving damping Part 2: layered damping treatment for structures: analysis and examples
ESDU 91013 A-1994 Methods for improving damping. Part 2: layered damping treatment for structures: analysis and examples.
ESDU 98007-1998 Design and performance evaluation of heat exchangers: the effectiveness-NTU method. Part 5: analytical techniques.
ESDU 98005 B-2006 Design and performance evaluation of heat exchangers: The effectiveness – NTU method Part 3: Graphical and analytical data
ESDU 98005-1998 Design and performance evaluation of heat exchangers: The effectiveness – NTU method Part 3: Graphical and analytical data
ESDU 98005 A-1998 DESIGN AND PERFORMANCE EVALUATION OF HEAT EXCHANGERS: THE EFFECTIVENESS - NTU METHOD PART 3: GRAPHICAL AND ANALYTICAL DATA

American Welding Society (AWS), Advantages of Chromatography

WRC 356:1990 Part 1: Finite Element Modelling Of A Single Pass Weld; Part 2: Finite Element Analysis of Multi-Pass Welds; Part 3: Thermal and Mechanical Simulations of Resistance Spot Welding

VN-TCVN, Advantages of Chromatography

TCVN 2621-1987 Ores of non-ferrous metals and theirs concentrates.General requirements for methods of chemical analysis
TCVN 4777-1989 Ores and concentrates of non-ferrous metals.Method of sieve and sedimentary analysis for determination of particle size
TCVN 6642-2000 Soil quality.Determination of organic and total carbon after dry combustion (elementary analysis)

GM North America, Advantages of Chromatography

GM GMN6814-2014 Standard Test Methods for Vulcanized Rubber and TPE for Use in Finite Element Analysis Modeling

国家市场监督管理总局、中国国家标准化管理委员会, Advantages of Chromatography

GB/T 41064-2021 Surface chemical analysis—Depth profiling—Method for sputter rate determination in X-ray photoelectron spectroscopy, Auger electron spectroscopy and secondary-ion mass spectrometry sputter depth profiling using single and multi-layer thin films

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Advantages of Chromatography

IPC TM-650 2.3.39-2004 Surface Organic Contaminant Identification Test (Infrared Analytical Method) Revision C

(U.S.) Ford Automotive Standards, Advantages of Chromatography

FORD FLTM BI 017-03-2001 DETERMINATION OF COATING WEIGHT - CHROMATE/ZINC DUST COMPLEX PORTASPEC X-RAY ANALYSIS METHOD
FORD FLTM BI 017-3-2001 DETERMINATION OF COATING WEIGHT - CHROMATE/ZINC DUST COMPLEX PORTASPEC X-RAY ANALYSIS METHOD

Canadian General Standards Board （CGSB), Advantages of Chromatography

CGSB 1-GP-71 METH 50.29-1980 Methodes D'Essai Des Peintures Et Pigments Analyse Pigmentaire Teneur Totale En Zinc Des Revetements Mineraux A Base De Zinc

中华人民共和国环境保护部, Advantages of Chromatography

GB 11895-1989 Water quality-Determination of benzo(a)-pyrene-Aectylated paper chromatography with fluorescence spectrophotometric method
GB 11222.1-1989 Radiochemical analysis of strontium-90 in ash of biological samples
GB 8971-1988 Air quality-Determination of benzo(a) pyrene in flying dust-Acetylated paper chromatography fluorescence spectrophotometric method

ISA - International Society of Automation, Advantages of Chromatography

ISA SAF INTGRTY LVL SELCT-2002 Safety Integrity Level Selection - Systematic Methods Including Layer of Protection Analysis
ISA SAF INT LEV SEL-2002 Safety Integrity Level Selection - Systematic Methods Including Layer of Protection Analysis

PT-IPQ, Advantages of Chromatography

NP 4409-2002 Animal feeding stuffs Determination of furazolidone content Method using high-performance liquid chromatography

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Advantages of Chromatography

ASHRAE 4484-2001 Heat Transfer Through a Composite Wall with Enclosed Spaces: A Practical Two-Dimensional Analysis Approach

Anhui Provincial Standard of the People's Republic of China, Advantages of Chromatography

DB34/T 3368.6-2019 Analytical methods of hazardous substances in printed circuit boards-Part 6: Determination of hexavalent chromium content by spectrophotometric method
DB34/T 3368.2-2019 Analytical methods of hazardous substances in printed circuit boards - Part 2: Determination of halogens (chlorine and bromine) by ion chromatography
DB34/T 2979.2-2017 Analytical methods of organic pollutants in plastics and their products - Part 2: Determination of formamide by gas chromatography-mass spectrometry

Aerospace, Security and Defence Industries Association of Europe (ASD), Advantages of Chromatography

ASD-STAN PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy (Edition P1)

Jiangsu Provincial Standard of the People's Republic of China, Advantages of Chromatography

DB32/T 4368-2022 Determination of Zearalenone in Feed by Time-Resolved Fluorescence Immunochromatographic Quantitative Method
DB32/T 4367-2022 Quantitative Time-Resolved Fluorescence Immunochromatographic Method for the Determination of Deoxynivalenol in Feed

IX-EU/EC, Advantages of Chromatography

93/1/EEC-1993 Commission Directive Amending Directive 77/535/EEC on the Approximation of the Laws of the Member States Relating to Methods of Sampling and Analysis for Fertilizers (Analysis Methods for Trace Elements)

AT-ON, Advantages of Chromatography

ONORM L 1088-1993 Chemical analysis of soils - Determination of plant-available phosphate and potassium by calcium-lactate-hydrochloric acid-method (DL-method)
ONORM L 1087-1993 Chemical analysis of soiis - Determination of plant-available phosphate and potassium by calcium-acetate-lactate (CAL)-method

Professional Standard - Water Conservancy, Advantages of Chromatography

SL/T 273.1-2001 Determination of trace nitrobenzenes by resin adsorption and gas ohromatography

BELST, Advantages of Chromatography

STB 1313-2002 Raw material and food productsMethods of definition contents of toxic elements zinc, cadmium, lead and copper by stripping voltammetric analysis on analyzers type TA

American National Standards Institute （ANSI), Advantages of Chromatography

ANSI/ASTM F1632:2003 TEST METHOD FOR PARTICLE SIZE ANALYSIS AND SAND SHAPE GRADING OF GOLF COURSE PUTTING GREEN AND SPORTS FIELD ROOTZONE MIXES

Universal Oil Products Company (UOP), Advantages of Chromatography

UOP 990-2011 Organic Analysis of Distillate by Comprehensive Two-Dimensional Gas Chromatography with Flame Ionization Detection