ZH
RU
ES

Chromatic difference principle

Chromatic difference principle, Total:138 items.

In the international standard classification, Chromatic difference principle involves: Paints and varnishes, Technical drawings, Linear and angular measurements, Plastics, Products of the textile industry, Bearings, Screw threads, Optics and optical measurements, Audio, video and audiovisual engineering, Paint ingredients, Colour coding, Medical sciences and health care facilities in general, Piezoelectric and dielectric devices, Bridge construction, Computer graphics, Shipbuilding and marine structures in general, Surface treatment and coating, Iron and steel products, Farming and forestry, Measurement of fluid flow, Petroleum products in general, Integrated circuits. Microelectronics, Products of the chemical industry, Electrical engineering in general, Graphical symbols, Fuels, Pesticides and other agrochemicals, Air quality.

British Standards Institution (BSI), Chromatic difference principle

BS 3900-D8:1986 Methods of test for paints. Optical tests on paint films. Determination of colour and colour difference: principles
BS ISO 8015:2001 Technical drawings. Fundamental tolerancing principle
BS EN ISO 11357-1:2016 Plastics. Differential scanning calorimetry (DSC). General principles
BS EN ISO 11357-1:1997 Plastics - Differential scanning calorimetry (DSC) - General principles
BS EN ISO 11357-1:2009 Plastics - Differential scanning calorimetry (DSC) - General principles
BS EN ISO 105-J01:2000 Textiles - Tests for colour fastness - General principles for measurement of surface colour
BS ISO 1132-2:2002 Rolling bearings. Tolerances. Measuring and gauging principles and methods
BS ISO 1132-2:2001 Rolling bearings. Tolerances - Measuring and gauging principles and methods
BS ISO 965-1:2013+A1:2021 ISO general purpose metric screw threads. Tolerances - Principles and basic data
BS 5100:1974 Guide to the principles of geometrical tolerancing (conforming to BS 308:Part 3:1972)
BS EN 61966-2-5:2010 Multimedia systems and equipment. Colour measurement and management. Colour management. Optional RGB colour space. opRGB
BS EN 61966-2-5:2008 Multimedia systems and equipment - Colour measurement and management - Colour management - Optional RGB colour space - opRGB
BS EN ISO 105-A01:1996 Textiles - Tests for colour fastness - General principles of testing
BS EN ISO 105-A01:2010 Textiles - Tests for colour fastness - General principles of testing
20/30423710 DC BS ISO 965-1 AMD1. ISO general purpose metric screw threads. Tolerances. Part 1. Principles and basic data
BS EN 10244-1:2001 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - General principles
21/30438772 DC BS ISO 965-1.2 AMD 1. ISO general purpose metric screw threads. Tolerances. Part 1. Principles and basic data
BS EN ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - General principles and requirements
BS EN 60446:2000 Basic and safety principles for man-machine interface, marking and identification - Identification of conductors by colours or numerals

FI-SFS, Chromatic difference principle

SFS 2105-1976

AT-ON, Chromatic difference principle

ONORM ISO 8015:1987 Technical drawings; fundamental tolerancing principle
ONORM ISO 965 Teil.1:1983 ISO generalpurpose metric screw threads; Tolerances; Principles and basic data

AENOR, Chromatic difference principle

UNE 72036:1982 DIFFERENCES SPECIFICATION OF PSYCHOPHYSIES COLOUR
UNE 58911:2002 Storage and retrieval machines. Calculation principles of storage and retrieval machines. Tolerances, deformations and clearances in the high-bay warehouse.

German Institute for Standardization, Chromatic difference principle

DIN 51007:1994 Thermal analysis; differential thermal analysis; principles
DIN 51007-1:2023-07 Thermal analysis - Differential thermal analysis (DTA) and differential scanning calorimetry (DSC) - Part 1: General principles / Note: Date of issue 2023-05-26*Intended as replacement for DIN 51007 (2019-04).
DIN 55603:2003 Testing of pigments - Determination of relative tinting strength and of colour difference on reduction of inorganic pigments using the lightness method
DIN 80010-1:1999 Visual display performance marine technology - Part 1: Selection of colours, association of colours, principles of design
DIN ISO 965-1/A1:2021-01 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data - Amendment 1 (ISO 965-1:2013/DAM 1:2020); Text in German and English / Note: Date of issue 2020-12-04*Intended as an amendment to DIN ISO 965-1 (2017-05).
DIN 55603 Bb.1:2003 Testing of pigments - Determination of relative tinting strength and of colour difference on reduction of inorganic pigments using the lightness method - Calculation example and example of test report
DIN 51405:2004 Testing of mineral oil hydrocarbons, similar liquids and solvents for paints and varnishes - Analysis by gas chromatography - General working principles
DIN ISO 3864-2:2008 Graphical symbols - Safety colours and safety signs - Part 2: Design principles for product safety labels (ISO 3864-2:2004);English version of DIN ISO 3864-2:2008-07
DIN 51425:2004 Testing of mineral oil hydrocarbons and similar materials - Analysis by high pressure liquid chromatography - General working principles
DIN ISO 3864-3:2007 Graphical symbols - Safety colours and safety signs - Part 3: Design principles for graphical symbols for use in safety signs (ISO 3864-3:2006) English version of DIN ISO 3864-3:2007-02

Association of German Mechanical Engineers, Chromatic difference principle

VDI/VDE 2631 Blatt 1-1999 Form measurement - Principles for the measurement of geometrical deviations
VDI 2100 Blatt 1-2008 Gaseous ambient air pollution measurement - Indoor air pollution measurement - Gas chromatographic determination of organic compounds - Fundamentals

SE-SIS, Chromatic difference principle

SIS SMS 1722-1973 Metric screw threads. Tolerances. Principles and basic data
SIS SMS 1722-1966 Metric screw threads. Tolerances. Principles and basic data

International Organization for Standardization (ISO), Chromatic difference principle

ISO 7724-1:1984 Paints and varnishes; Colorimetry; Part 1 : Principles
ISO 965-1:1998 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data
ISO 965-1:2013 ISO general purpose metric screw threads.Tolerances.Part 1: Principles and basic data
ISO 22324:2022 Security and resilience – Emergency management – Guidelines for colour-coded alert
ISO 105-A01:1990 Textiles; tests for colour fastness; part A01: general principles of testing
ISO 965-1:2013/Amd 1:2021 ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data — Amendment 1
ISO 965-1:1998/cor 1:2009 ISO general-purpose metric screw threads - Tolerances - Part 1: Principles and basic data; Technical Corrigendum 1
ISO 3864-2:2004 Graphical symbols - Safety colours and safety signs - Part 2: Design principles for product safety labels
ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements
ISO 3864-1:2011 Graphical symbols - Safety colours and safety signs - Part 1: Design principles for safety signs and safety markings
ISO 3864-3:2006 Graphical symbols - Safety colours and safety signs - Part 3: Design principles for graphical symbols for use in safety signs
ISO 3864-3:2012 Graphical symbols - Safety colours and safety signs - Part 3: Design principles for graphical symbols for use in safety signs

Danish Standards Foundation, Chromatic difference principle

DS/ISO 7724/1:1986 Paints and varnishes. Colorimetry. Part 1: Principles
DS/ISO 965-1:2013 ISO general purpose metric screw threads - Tolerances - Part 1: Principles and basic data

Korean Agency for Technology and Standards (KATS), Chromatic difference principle

KS M ISO 7724-1-2007(2022) Paints and varnishes－Colorimetry－Part 1：Principles
KS M ISO 7724-1-2007(2017) Paints and varnishes－Colorimetry－Part 1：Principles
KS F ISO 1803-2002(2017) Building construction－Tolerances－Expression of dimensional accuracy－Principles and terminology
KS M ISO 7724-1:2007 Paints and varnishes－Colorimetry－Part 1：Principles
KS M ISO 217:2008 Paper-Untrimmed sizes-Designation and tolerances for primary and supplementary ranges, and indication of machine direction
KS B ISO 5167-1:2004 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full-Part 1:General principles and requirements
KS B ISO 5167-1:2014 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 1: General principles and requirements
KS S ISO 3864-2:2005 Graphical symbols-Safety colours and safety signs-Part 2:Design principles for product safety labels
KS S ISO 3864-1:2011 Graphical symbols-Safety colours and safety signs-Part 1:Design principles for safety signs and safety markings
KS S ISO 3864-3:2007 Graphical symbols--Safety colours and safety signs--Part 3：Design principles for graphical symbols for use in safety signs
KS S ISO 3864-3:2012 Graphical symbols－Safety colours and safety signs－Part 3：Design principles for graphical symbols for use in safety signs
KS S ISO 3864-1:2016 Graphical symbols－Safety colours and safety signs－Part 1：Design principles for safety signs and safety markings
KS S ISO 3864-3:2017 Graphical symbols－Safety colours and safety signs－Part 3：Design principles for graphical symbols for use in safety signs

American Society of Mechanical Engineers (ASME), Chromatic difference principle

ASME Y14.5.1M-1994 Mathematical definition of dimensioning and tolerancing principles

CU-NC, Chromatic difference principle

NC 06-69-1969 ISO metric screw threads. Tolerances. Principies and basic data

Taiwan Provincial Standard of the People's Republic of China, Chromatic difference principle

CNS 3-12-1994 Engineering Drawing (Geometrical Tolerancing - Maximum Material Principle)
CNS 3.12-1994 Engineering Drawing (Geometrical Tolerancing - Maximum Material Principle)
CNS 3.16-1994 Engineering Drawing (Geometrical Tolerancing - Principles and Methods of Verification)
CNS 3-16-1994 Engineering Drawing (Geometrical Tolerancing - Principles and Methods of Verification)

CH-SNV, Chromatic difference principle

RU-GOST R, Chromatic difference principle

GOST R 52489-2005 Paint materials. Colorimetry. Part 1. Principles

American National Standards Institute （ANSI), Chromatic difference principle

ANSI/ASME Y14.43-2011 Dimensioning and Tolerancing Principles for Gages and Fixtures

Association Francaise de Normalisation, Chromatic difference principle

NF A91-424:1988 Surface treatments - Anodized aluminium and aluminium alloys - Determination of colour and colour difference of coloured anodic coatings
NF E22-337-2*NF ISO 1132-2:2002 Rolling bearings - Tolerances - Part 2 : measuring and gauging principles and methods
NF ISO 965-1:2013 Filetages métriques ISO pour usages généraux - Tolérances - Partie 1 : principes et données fondamentales
NF EN ISO 16373-1:2016 Textiles - Colorants - Partie 1 : principes généraux d'essai des textiles colorés pour l'identification des colorants
NF E03-051*NF ISO 965-1:2013 ISO general purpose metric screw threads - Tolerances - Part 1: principles and basic data
NF ISO 1132-2:2002 Roulements - Tolérances - Partie 2 : principes et méthodes de mesurage et de vérification par calibre
NF G07-010-1*NF EN ISO 105-A01:2010 Textiles - Tests for colour fastness - Part A01 : general principles of testing
NF G07-010-1:1996 Textiles. Tests for colour fastness. Part A01 : general principles of testing.
NF ISO 965-1/A1:2021 Filetages métriques ISO pour usages généraux - Tolérances - Partie 1 : principes et données fondamentales - Amendement 1
NF EN ISO 105-J01:2000 Textiles - Essais de solidité des teintures - Partie J01 : principes généraux du mesurage de la couleur de surface
NF X08-020:2005 Graphical symbols - Safety colours and safety signs - Part 2 : design principles for product safety labels.
NF X10-102-1*NF EN ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1 : general principles and requirements
NF X08-020-1*NF ISO 3864-1:2013 Graphical symbols - Safety colours and safety signs - Part 1 : design principles for safety signs and safety markings
NF X08-020-3*NF ISO 3864-3:2012 Graphical symbols - Safety colours and safety signs - Part 3 : design principles for graphical symbols for use in safety signs

IT-UNI, Chromatic difference principle

UNI 7226-P2-1976

未注明发布机构, Chromatic difference principle

BS ISO 1803:1997(1999) Building construction — Tolerances — Expression of dimensional accuracy — Principles and terminology

HU-MSZT, Chromatic difference principle

Shanxi Provincial Standard of the People's Republic of China, Chromatic difference principle

DB14/T 591-2010 Taiyuan Green Foot Bath Industry Service Management Specifications
DB14/T 592-2010 Purchasing and distribution management specifications for green commercial chain enterprises in Taiyuan

KP-CSK, Chromatic difference principle

KPS 2551-1-2002 General purpose metric screw threads-Tolerances-Part 1:Principles and basic data

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Chromatic difference principle

GB/T 11186.1-1989 Methods for measuring the colour of paint films--Part 1:Principles
GB 11186.1-1989 The measurement method of the color of the coating film, the first part of the principle
GB 17149.7-1997 Diagnostic criteria and principles of management of skin discolouration induced by cosmetics
GB/T 2624.1-2006 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements
GB/T 15670.17-2017 Toxicological test methods for pesticides registration.Part 17: Mammalian spermatogonial/spermatocyte chromosome aberration test

International Electrotechnical Commission (IEC), Chromatic difference principle

IEC 61966-2-5:2007 Multimedia systems and equipment - Colour measurement and management - Part 2-5: Colour management - Optional RGB colour space - opRGB

Japanese Industrial Standards Committee (JISC), Chromatic difference principle

JIS B 0217-1:2013 ISO metric trapezoidal screw threads.Tolerances .Part 1: Principles and basic data
JIS B 1515-2:2006 Rolling bearings -- Tolerances -- Part 2: Measuring and gauging principles and methods
JIS Z 8317-1:2008 Technical drawings -- Indications of dimensions and tolerances -- Part 1: General principles
JIS K 5600-4-4:1999 Testing methods for paints -- Part 4: Visual characteristics of film -- Section 4: Colorimetry (Principles)
JIS K 5600-4-4 ERRATUM 1:2002 Testing methods for paints -- Part 4: Visual characteristics of film -- Section 4: Colorimetry (Principles) (Erratum 1)
JIS Z 9101:2005 Safety colours and safety signs -- Design principles for safety signs in workplaces and public areas

国家技术监督局、中华人民共和国卫生部, Chromatic difference principle

GB/T 17149.7-1997 Disgnostic criteria and principles of management of skin discolouration induced by cosmetics

Group Standards of the People's Republic of China, Chromatic difference principle

T/CECA 83-2023 Lithium tantalate and lithium niobate reduced single crystal wafers— technical requirements and measurement methods for lightness and color difference
T/COCIA 14-2021 Determination of Chlorogenic Acid Content in Toothpaste of Oral Cleaning and Nursing Products by High Performance Liquid Chromatography

Hubei Provincial Standard of the People's Republic of China, Chromatic difference principle

DB42/T 1742-2021 Technical regulations for bridge vertical displacement monitoring based on the principle of liquid-gas coupling pressure difference

Anhui Provincial Standard of the People's Republic of China, Chromatic difference principle

DB34/T 910.3-2009 Management guidelines for standardized production bases of green food raw materials (tea)
DB34/T 1231-2010 Management Guidelines for Standardized Production Bases of Green Food Raw Materials (Rapeseed)
DB34/T 910.1-2009 Management guidelines for standardized production bases of green food raw materials (rice)
DB34/T 910.2-2009 Management Guidelines for Standardized Production Bases of Green Food Raw Materials (Wheat)
DB34/T 1520-2011 Anhui Province Green Food Raw Material (Soybean) Standardized Production Base Management Guidelines
DB34/T 1779-2012 Management Guidelines for Standardized Production Bases of Green Food Raw Materials (Common Corn) in Anhui Province

VE-FONDONORMA, Chromatic difference principle

Professional Standard - Electron, Chromatic difference principle

SJ/T 11007-1996 Semiconductor TV integrated circuits - General principles of measuring methods for video signal and chrominance signal processing circuits

Yunnan Provincial Standard of the People's Republic of China, Chromatic difference principle

DB53/T 904.2-2019 Plateau characteristic agricultural product Zhenyuan chicken part 2: Breeding environment and feeding management
DB53/T 568.6-2014 Plateau characteristic agricultural product South Diannan small-eared pig Part 6: Production and management technical regulations for breeding pigs

American Society for Testing and Materials (ASTM), Chromatic difference principle

ASTM D7133-11 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids

European Committee for Standardization (CEN), Chromatic difference principle

EN ISO 5167-1:2022 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2022)
EN ISO 5167-1:2003 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements ISO 5167-1:2003;

CEN - European Committee for Standardization, Chromatic difference principle

EN ISO 5167-1:1995 Measurement of Fluid Flow by Means of Pressure Differential Devices - Part 1: Orifice Plates@ Nozzles and Venturi Tubes Inserted in Circular Cross-Section Conduits Running Full

European Telecommunications Standards Institute (ETSI), Chromatic difference principle

ETSI TR 125 921-2000 Universal Mobile Telecommunications System (UMTS); Guidelines and Principles for Protocol Description and Error Handling 3G TR 25.921 Version 3.1.0 Release 1999
ETSI TR 125 921-2003 Universal Mobile Telecommunications System (UMTS); Guidelines and principles for protocol description and error handling 3GPP TR 25.921 Version 5.2.0 Release 5
ETSI TR 125 921-2002 Universal Mobile Telecommunications System (UMTS); Guidelines and Principles for Protocol Description and Error Handling 3GPP TR 25.921 Version 4.4.0 Release 4
ETSI TR 125 921-2004 Universal Mobile Telecommunications System (UMTS); Guidelines and principles for protocol description and error handling 3GPP TR 25.921 version 4.8.0 Release 4
ETSI TR 125 921-2005 Universal Mobile Telecommunications System (UMTS); Guidelines and principles for protocol description and error handling 3GPP TR 25.921 version 6.1.0 Release 6
ETSI TR 125 921-2001 Universal Mobile Telecommunications System (UMTS); Guidelines and Principles for Protocol Description and Error Handling 3GPP TR 25.921 Version 4.2.0 Release 4
ETSI TR 125 921-2007 Universal Mobile Telecommunications System (UMTS); Guidelines and principles for protocol description and error handling

US-CFR-file, Chromatic difference principle

CFR 2-1800.6-2014 Grants and agreements. Part1800:Uniform administrative requirements, cost principles, and audit requirements for federal awards. Section1800.6:Deviations.
CFR 2-200.474-2013 Grants and Agreements. Part200:Uniform administrative requirements, cost principles,and audit requirements for Federal awards. Section200.474:Travel costs.