ZH
RU
ES
Niobium ion titration
Niobium ion titration, Total:272 items.
In the international standard classification, Niobium ion titration involves: Non-ferrous metals, Products of the chemical industry, Analytical chemistry, Ferrous metals, Organic chemicals, Water quality, Fertilizers, Ferroalloys, Iron and steel products, Wood-based panels, Metalliferous minerals, Soil quality. Pedology, Pulps, Farming and forestry, Inorganic chemicals, Rubber, Nuclear energy engineering, Edible oils and fats. Oilseeds, Power stations in general, Surface treatment and coating, Construction industry, Coals, Tobacco, tobacco products and related equipment, Environmental protection, Testing of metals, Non-metalliferous minerals, Fruits. Vegetables, Geology. Meteorology. Hydrology, Mining equipment, Radiation measurements, General methods of tests and analysis for food products, Paint ingredients.
AENOR, Niobium ion titration
- UNE 35054-1:1985 FERRONIOBIUM. SPECTROPHOTOMETRIC DETERMINATION OF NIOBIUM AFTER SEPARATION ON ION EXCHANGE RESIUS
- UNE-EN 14480:2005 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
- UNE 55540:1979 SURFACE ACTIVE AGENTS. DETERMINATION OF FREEE ALKALINITY OR FREE ACIDITY. TITRIMETRIC METHOD
- UNE 55520:1991 SURFACE ACTIVE AGENTS. DETERGENTS. DETERMINATION OF ANIONIC-ACTIVE MATTER. MANUAL OR MECHANICAL DIRECT TWO-PHASE TITRATION PROCEDURE.
- UNE-EN 14669:2005 Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method
ES-AENOR, Niobium ion titration
Association Francaise de Normalisation, Niobium ion titration
- NF A11-102:1977 Chemical analysis of ferroniobium.Spectrophotometric determination of niobium after separation on ion exchange resins.
- NF EN 14480:2004 Agents de surface - Détermination des agents de surface anioniques - Méthode potentiométrique de titrage dans deux phases
- NF T73-287*NF EN 14480:2004 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
- NF T90-048*NF EN ISO 14911:1999 Water quality - Determination of dissolved Li+, Na+, NH 4+, K+, Mn 2+, Ca 2+, Mg 2+, Sr 2+ and Ba 2+ using ion chromatography - Method for water and waste water.
- NF T73-205:1977 Surface active agents. Determination of free alkalinity or free acidity. Titrimetric method.
- NF T73-258*NF ISO 2271:1990 Surface active agents. Detergents. Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure.
- NF T73-293*NF EN 14880:2005 Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method.
- NF EN ISO 10304-4:2022 Qualité de l'eau - Dosage des anions dissous par chromatographie des ions en phase liquide - Partie 4 : dosage des ions chlorate, chlorure et chlorite dans des eaux faiblement contaminées
Korean Agency for Technology and Standards (KATS), Niobium ion titration
- KS D ISO TR 11434:2001 Nickel alloys-Determination of niobium and tantalum in nickel alloys-Ion exchange method
- KS D ISO 22033:2021 Nickel alloys — Determination of niobium — Inductively coupled plasma/atomic emission spectrometric method
- KS D ISO 22033:2006 Nickel alloys－Determination of niobium－Inductively coupled plasma atomic emission spectrometric method
- KS D ISO 11653-2003(2018) Steel－Determination of high cobalt content－Potentiometric titration method after separation by ion exchange
- KS D ISO TR 11434-2001(2016) Nickel alloys－Determination of niobium and tantalum in nickel alloys－Ion exchange method
- KS D ISO 13899-2:2006 Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 2：Determination of Nb content
- KS D ISO 13899-2-2006(2016) Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 2：Determination of Nb content
- KS D ISO 11653:2003 Steel－Determination of high cobalt content－Potentiometric titration method after separation by ion exchange
- KS E ISO 12739:2007 Zinc sulfide concentrates－Determination of zinc content－Ion-exchange and EDTA titrimetric method
- KS K 0195-2006 Non-ionic surface active agents-Determination of cloud point index-Volumetric method
- KS D ISO 22033-2006(2016) Nickel alloys－Determination of niobium－Inductively coupled plasma atomic emission spectrometric method
- KS E ISO 12739-2007(2022) Zinc sulfide concentrates－Determination of zinc content－Ion-exchange and EDTA titrimetric method
- KS E ISO 12739-2007(2017) Zinc sulfide concentrates－Determination of zinc content－Ion-exchange and EDTA titrimetric method
- KS I ISO 14911:2009 Water quality-Determination of dissolved Li+, Na+,NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography-Method for water and waste water
- KS D ISO 13899-1-2010(2020) Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 1：Determination of Mo content
- KS D ISO 13899-3-2006(2016) Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 3：Determination of W content
- KS M ISO 4314:2003 Surface active agents－Determination of free alkalinity or free acidity－Titrimetric method
- KS M ISO 4314-2003(2018) Surface active agents－Determination of free alkalinity or free acidity－Titrimetric method
- KS D ISO 13899-1:2010 Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 1：Determination of Mo content
- KS D ISO 13899-3:2006 Steel－Determination of Mo, Nb and W contents in alloyed steel－Inductively coupled plasma atomic emission spectrometric method－Part 3：Determination of W content
- KS M ISO 2993:2002 Ammonium sulphate for industrial use－Determination of free acidity－Titrimetric method
- KS M ISO 2993:2017 Ammonium sulphate for industrial use — Determination of free acidity — Titrimetric method
- KS M ISO 2993-2017(2022) Ammonium sulphate for industrial use — Determination of free acidity — Titrimetric method
- KS M ISO 2271-2007(2022) Surface active agents－Detergents－Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure
- KS M ISO 2271-2007(2017) Surface active agents－Detergents－Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure
- KS M ISO 2271:2007 Surface active agents－Detergents－Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure
RO-ASRO, Niobium ion titration
International Organization for Standardization (ISO), Niobium ion titration
- ISO/TR 11434:1992 Nickel alloys; determination of niobium and tantalum; ion exchange method
- ISO 22033:2005 Nickel alloys - Determination of niobium - Inductively coupled plasma atomic emission spectrometric method
- ISO 22033:2011 Nickel alloys - Determination of niobium - Inductively coupled plasma/atomic emission spectrometric method
- ISO 13899-2:2005 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 2: Determination of Nb content
- ISO 3693:1977 Nitric acid for industrial use; Determination of chloride ions content; Potentiometric method
- ISO 12739:2006 Zinc sulfide concentrates - Determination of zinc - Ion-exchange/EDTA titrimetric method
- ISO 3694:1977 Ammonium sulphate for industrial use; Determination of chloride ions content; Potentiometric method
- ISO 3695:1977 Ammonium nitrate for industrial use; Determination of chloride ions content; Potentiometric method
- ISO 6227:1982 Chemical products for industrial use; General method for determination of chloride ions; Potentiometric method
- ISO 23777:2023 Pulps — Kraft liquor — Determination of hydrosulphide ion concentration using potentiometric titration
- ISO 14911:1998 Water quality - Determination of dissolved Li<(hoch)+>, Na<(hoch)+>, NH<(Index)4><(hoch)+>, K<(hoch)+>, Mn<(hoch)2+>, Ca<(hoch)2+>, Mg<(hoch)2+>, Sr<(hoch)2+> and Ba<(hoch)2+> using ion chromatography - Method for water and waste water
- ISO 2271:1972 Surface active agents — Detergents — Determination of anionic-active matter (Direct two-phase titration procedure)
- ISO 2871:1973 Surface active agents — Detergents — Determination of cationic-active matter — Direct two-phase titration procedure
- ISO 4314:1977 Surface active agents; Determination of free alkalinity or free acidity; Titrimetric method
- ISO/TS 13899-1:2004 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 1: Determination of Mo content
- ISO/TS 13899-3:2005 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Part 3: Determination of W content
- ISO 2993:1974 Ammonium sulphate for industrial use; Determination of free acidity; Titrimetric method
- ISO 2271:1989 Surface active agents; detergents; determination of anionic-active matter by manual or mechanical direct two-phase titration procedure
American Society for Testing and Materials (ASTM), Niobium ion titration
- ASTM D3049-89(1996)e1 Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
- ASTM D3049-89(2003) Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
- ASTM D304-95(1999) Standard Specification for n-Butyl Alcohol (Butanol)
- ASTM D3049-89(2009) Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
- ASTM D3049-89(2016) Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
- ASTM D1681-92(1997) Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure
- ASTM D1681-05 Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure
- ASTM D1681-05(2014) Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure
- ASTM D4251-89(2009) Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
- ASTM D6173-97(2014) Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration
- ASTM D4251-89(1995)e1 Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
- ASTM D4251-89(2016) Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
- ASTM D6173-97(2005) Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration
- ASTM D6173-97 Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration
- ASTM D4251-89(2003) Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
KR-KS, Niobium ion titration
- KS D ISO 22033-2021 Nickel alloys — Determination of niobium — Inductively coupled plasma/atomic emission spectrometric method
- KS M ISO 4314-2003(2023) Surface active agents－Determination of free alkalinity or free acidity－Titrimetric method
- KS M ISO 2993-2017 Ammonium sulphate for industrial use — Determination of free acidity — Titrimetric method
RU-GOST R, Niobium ion titration
- GOST R ISO 22033-2014 Nickel alloys. Determination of niobium. Inductively coupled plasma/atomic emission spectrometric method
- GOST R ISO 13899-2-2009 Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method. Part 2. Determination of Nb content
- GOST 29336-1992 Ammonium sulphate for industrial use. Determination of free acid content. Titrimetric method
- GOST 15615-1979 Ion exchange rezins. Method for determination of chlorine ions content
- GOST 33914-2016 Juice products. Determination of anions by ion chromatography
- GOST R 50233.5-1992 Niobium pentoxide. Chemical-atomic-emission method for determination of impurity metals
- GOST R 55339-2012 Juice products. Determination of anions by ion exchange chromatography method
- GOST 34744-2021 Drinking water. Determination of bromide and iodide ions by capillary electrophoresis method
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Niobium ion titration
- GB/T 223.38-1985 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-gravimetric method for the determination of niobium content
- GB 223.38-1985 Chemical analysis method of iron, steel and alloy Ion exchange separation gravimetric method for determination of niobium content
- GB/T 13199-1991 Water quality--Determination of anionic detergent--Potentiometric method
- GB/T 3654.1-1983 Methods for chemical analysis of ferroniobium--The paper chromatographic gravimetric method for the determination of niobium and tantalum content
- GB 3654.1-1983 Ferro-niobium chemical analysis method Determination of niobium and tantalum by paper chromatographic gravimetric method
- GB/T 223.40-1985 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-sulphochlorophenol S photometric method for the determination of niobium content
- GB/T 15452-1995 Industrial circulating cooling water--Determination of calcium and magnesium--EDIT titration method
- GB/T 15452-2009 Industrial circulating cooling water.Determination of calcium and magnesium.EDTA titration method
- GB/T 15453-1995 Industrial circulating cooling water Determination of chloride Silver nitrate titration method
- GB/T 5174-1985 Surface active agents--Detergents--Determination of cationic-active matter--Direct two-phase titration procedure
- GB/T 15076.7-2020 Methods for chemical analysis of tantalum and niobium—Part 7:Determination of phospherus content in niobium—4-Formyloxy-pentyl ketone-[2] extraction separation phosphomolybdate blue spectrophotometry and inductively coupled plasma atomic emission spectrom
- GB/T 15076.6-2020 Methods for chemical analysis of tantalum and niobium—Part 6:Determination of silicon content—Inductively coupled plasma atomic emission spectrometry
- GB/T 15253-1994 Rubber--Determination of tree Sulpher--Potentiometic titration method
- GB/T 5173-1995 Surface active agents and detergents--Determination of anionic-active matter by direct two-phase titration procedure
- GB/T 6365-1986 Surface active agents--Determination of free alkalinity or free acidity--Titrimetric method
- GB/T 6365-2006 Surface active agents. Determination of free alkalinity or free acidity. Titrimetric method
- GB 6365-1986 Surface active agents－Determination of free alkalinity or free acidity－Titrimetric method
- GB/T 17415.2-1998 Methods for chemical analysis of Tantalum and Niobium ores--Determination of Niobium content--Preconcentration and separation with silica gel--Thiocyanate extraction photometric method
- GB/T 6150.7-2008 Methods for chemical analysis of tungsten concentrates.Determination of tantalum content and niobium content.Inductively coupled plasma emission spectrometry and spectrophotometry
- GB/T 8151.18-2012 Methods for chemical analysis of zinc concentrates.Part 18:Determination of zinc content.Ion-exchange/Na<下标2>EDTA titrimetric method
- GB/T 17863-1999 Determination of thorium in thorium ores N263 separation EDTA titration method
- GB/T 8151.1-2012 Methods for chemical analysis of zinc concentrates.Part 1:Determination of zinc content.Precipitate separation-Na<下标2>EDTA titrimetric method and extractive separatioh-Na<下标2> EDTA titrimetric method
- GB/T 38513-2020 Methods for chemical analysis of niobium hafnium alloys—Determination of hafnium, titanium, zirconium, tungsten, tantalum contents—Inductively coupled plasma atomic emission spectrometry
- GB/T 42276-2022 Determination of fluorine ion and chloride ion in silicon nitride powder—Ion chromatography method
- GB/T 29400-2012 Determination of microamount of inorganic anions in fertilizers by ion chromatography
- GB/T 18882.5-2002 Chemical analysis methods for mixed rare earth oxide of ion-absorpted type RE ore-Determination of aluminum oxide content-EDTA titrimetric method
- GB/T 23978-2009 Liquid dyes.Determination of chloride of chloride ion.Ion chromatography
- GB/T 3884.12-2023 Methods of chemical analysis of copper concentrates - Part 12: Determination of fluorine and chlorine content by ion chromatography and potentiometric titration
- GB/T 5122.2-1985 Methods for chemical analysis of brass--The electrolytic separation--EDTA titrimetric method for the determination of lead content
- GB 8150.2-1987 Methods for chemical analysis of xanthates--The acetic acid titration method for determination of free alkali content
- GB/T 15076.11-2020 Methods for chemical analysis of tantalum and niobium—Part 11:Determination of arsenic,antimony,lead,tin and and bismuth contents in niobium—Direct current arc atomic emission spectrometry
- GB/T 6150.2-2022 Methods for chemical analysis of tungsten concentrates—Part 2: Determination of tin content—Potassium iodate titrimetry and inductively coupled plasma atomic emission spectrometry
- GB/T 31197-2014 Inorganic chemicals for industrial use.Determination of impurity anions.Ion chromatography method
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Niobium ion titration
- GB/T 15076.1-2017 Methods for chemical analysis of tantalum and niobium—Part 1: Determination of tantalum content in niobium—Inductively coupled plasma atomic emission spectrometry
- GB/T 15076.5-2017 Methods for chemical analysis of tantalum and niobium—Part5:Determination of molybdenum and tungsten contents—Inductively coupled plasma atomic emission spectrometry
- GB/T 35664-2017 Determination of ammonium in the wet precipitation—Ion chromatography
- GB/T 4698.8-2017 Methods for chemical analysis of titanium sponge, titanium and titanium alloys—Part 8：Determination of aluminum content—Separation with sodium hydroxide-EDTA complex-metric titration and inductively coupled plasma atomic emission spectrometry
- GB/T 13747.25-2017 Methods for chemical analysis of zirconium and zirconium alloys—Part 25：Determination of niobium content—2-(5-bromo-2-pyridylazo)-5-diethylam inophenol spectrophotometry and inductively coupled plasma atomic emission spectrometry
国家市场监督管理总局、中国国家标准化管理委员会, Niobium ion titration
- GB/T 15076.2-2019 Methods for chemical analysis of tantalum and niobium—Part 2:Determination of niobium content in tantalum—Inductively coupled plasma atomic emission spectrometry and stratography gravimetry
- GB/T 5174-2018 Surface active agents—Detergents—Determination of cationic-active matter content—Direct two-phase titration procedure
- GB/T 5173-2018 Surface active agents—Detergents—Determination of anionic-active matter content—Direct two-phase titration procedure
- GB/T 37385-2019 Test method for chloride content of silicon—Ion chromatography method
- GB/T 40395-2021 Determination of ammonium in methanol for industrial use—Ion chromatography
Professional Standard - Commodity Inspection, Niobium ion titration
- SN/T 3121-2012 Determination of high cobalt content in Steel.Potentiometric titration method after separation by ion exchange
- SN/T 3515-2013 Iron,steel and alloy.Determination of boron,titanium,zirconium,niobium,tin,antimony,tantalum,tungsten and lead.Inductively coupled plasma mass spectrometric
- SN/T 3806-2014 Determination of niobium、boron、wolfram and zirconium content in carbon steel and alloy steel for import and export.Inductively coupled plasma atomic emission spectrometric method
- SN/T 4310-2015 Determination of chloride,nitrate and sulphate in phosphoric acid for import and export.Ion chromatography
中华人民共和国环境保护部, Niobium ion titration
- GB 13199-1991 Water quality-Determination of anionic detergent-Potentiometric method
Group Standards of the People's Republic of China, Niobium ion titration
- T/QAS 014-2020 Determination of Chloride Ion Content in Fertilizer Potentiometric Titration
- T/CMES 08002-2020 Determination of Ferroniobium Impurity Elements by Inductively Coupled Plasma Atomic Emission Spectrometry
- T/QAS 072-2021 Determination of ammonium ion content in potassium chloride Titration method after distillation
- T/NAIA 0174-2022 Determination of Cation Exchange Capacity of Calcareous Soil by Eluting Titration
- T/SBX 029-2019 Mercury Salt Titration Method for Determination of Trace Chloride Ion Content in Water-Insoluble Organic Amines
- T/CECS 10206-2022 Determination of Chloride Ion and Sulfate Ion in Concrete by Ion Chromatography
- T/QAS 081.2-2023 Chemical Analysis of Polymetallic Minerals Part 2: Determination of Niobium and Tantalum Atmospheric Pressure Acid Dissolution - Inductively Coupled Plasma Mass Spectrometry
- T/CSTM 00376-2021 Vanadium Titanium Magnetite ore—The determination of scandium, niobium, zirconium, gallium, germanium, indium, selenium, tellurium and bismuth contents—Microwave digestion- Inductively coupled plasma mass spectrometric method
Sichuan Provincial Standard of the People's Republic of China, Niobium ion titration
- DB51/T 1782-2014 Determination of Niobium and Tantalum in Geological Samples by Inductively Coupled Plasma Mass Spectrometry
- DB51/T 2040-2015 Determination of Aluminum Content in Vanadium Aluminum Alloy Barium Salt-Strong Alkali Separation-EDTA Back Titration Method
Jiangxi Provincial Standard of the People's Republic of China, Niobium ion titration
- DB36/T 689-2012 Chemical analysis method of ionic rare earth raw ore Determination of total amount of rare earth in ionic phase EDTA titration method
Professional Standard - Ferrous Metallurgy, Niobium ion titration
- YB/T 4395-2014 Steel.Determination of molybdenum, niobium and tungsten contents.Inductively coupled plasma atomic emission spectrometric method
工业和信息化部, Niobium ion titration
- YB/T 4726.2-2018 Determination of chloride ion content in iron-containing dust sludge by silver nitrate titration method
- SJ/T 11635-2016 Determination of carbonate ions in developing solutions for the electronics industry by automatic potentiometric titration
- YB/T 6013.2-2022 Determination of chloride ion content in sintering flue gas desulfurization ash using potentiometric titration method
- HG/T 5938-2021 Determination of chloride ion content in humic acid fertilizers by automatic potentiometric titration
- YB/T 4908.3-2021 Determination of aluminum content in vanadium-aluminum alloy Barium salt strong alkali separation-EDTA titration method
- YS/T 1380-2020 Chemical analysis methods for rhodium compounds Determination of chloride ion and nitrate ion content Ion chromatography
- YB/T 4566.2-2016 Determination of nitrogen content of vanadium iron nitride, distillation and separation-acid-base neutralization titration method
Canadian General Standards Board （CGSB), Niobium ion titration
- CGSB 2.11-94 17.3-CAN/CGSB-1994 Methodes D'Echantillonnage Et Et D'Essai Des Savons Et Detergents Determination De La Teneur En Ingredient Anionique Actif (Par Titrage Cationique)
Professional Standard - Agriculture, Niobium ion titration
- GB 5174-1985 Determination of Cationic Actives in Detergents by Direct Two-Phase Titration
- NY/T 1797-2009 Method for determination of free fatty acids content in rapeseed-Titrimetric method
- SN/T 5056-2018 Determination of fluoride ion, nitrite ion, nitrate ion, phosphate ion and sulfate ion in sodium chloride by ion chromatography
- SN/T 5052-2018 Ion chromatography for the determination of fluoride, chloride, sulfate and nitrate ions in water-soluble carbonates
- SN/T 5051-2018 Determination of Fluoride, Chloride, Sulfate and Nitrate in Water-Soluble Phosphates by Ion Chromatography
British Standards Institution (BSI), Niobium ion titration
- BS ISO 23777:2023 Pulps. Kraft liquor. Determination of hydrosulphide ion concentrationusing potentiometric titration
- BS ISO 12739:2006 Zinc sulfide concentrates - Determination of zinc - Ion-exchange/EDTA titrimetric method
- BS DD ISO/TS 13899-3:2006 Steel - Determination of Mo, Nb and W contents in alloyed steel - Inductively coupled plasma atomic emission spectrometric method - Determination of W content
- BS EN 14480:2004 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
- BS EN 14480:2004(2009) Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
- BS EN ISO 7393-3:2000 Water quality. Determination of free chlorine and total chlorine. Iodometric titration method for the determination of total chlorine
- BS 7079-B12:2003 Preparation of steel substrates before application of paints and related products - Methods for the assessment of surface cleanliness - Field method for the titrimetric determination of water-soluble ferrous ions
- BS EN 14669:2005 Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method
- BS EN 14880:2005 Surface active agents - Determination of inorganic sulfate content in anionic surface active agents - Potentiometric lead selective electrode titration method
Liaoning Provincial Standard of the People's Republic of China, Niobium ion titration
- DB21/T 609-1991 Determination of chloride ions in soil soluble salts - silver phosphate titration method
- DB21/T 608-1991 Determination of carbonate and bicarbonate ions in soil soluble salts - double indicator titration method
Jiangsu Provincial Standard of the People's Republic of China, Niobium ion titration
- DB32/T 4032-2021 Determination of lithium, niobium, tin, bismuth in soil and sediments by inductively coupled plasma mass spectrometry
BE-NBN, Niobium ion titration
- NBN T 63-127-1980 Surface active agents - Detergents -Dermination of cationic-active matter - Direct two-phase titration
- NBN T 63-122-1980 Surface active agents - Detergents- Determination of anionic active matter - Direct two-phase titration method
- NBN T 63-131-1980 Surface active agents - DEermination of free alkalinity or free acidity - Titrimetric method
- NBN T 03-067-1979 Ammonium sulphate for industrial use - Determination of free acidity - Titrimetric method
- NBN-ISO 2271:1990 Surface active agents - Detergents - Détermination of anionic-active matter by manual or mechanical direct two-phase titration procedure
PL-PKN, Niobium ion titration
- PN C07000-1993 Chemical products for industrial use. General method for determination of chloride ions. Potentiometric method
- PN C04818-1987 Surface active agents Determination of cationic active matter Direct twophase titration procedur?
- PN C04603-04-1986 Water and waste water Tests for cyanides Determination of frec combined and total cyanides by potentiometric method with ion selective electrode
Danish Standards Foundation, Niobium ion titration
- DS/EN 14480/AC:2006 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
- DS/EN 14480:2004 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
- DS/EN 14669:2005 Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method
Lithuanian Standards Office , Niobium ion titration
- LST EN 14480-2005 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
- LST EN 14480-2005/AC-2006 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
- LST EN 14669-2005 Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method
Standard Association of Australia （SAA）, Niobium ion titration
- AS 2678.2:2008 Zinc sulfide concentrates - Chemical analysis - Determination of zinc - Ion-exchange/EDTA titrimetric method
ES-UNE, Niobium ion titration
- UNE-EN 14480:2005/AC:2006 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
German Institute for Standardization, Niobium ion titration
- DIN EN 14480:2004 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method; German version EN 14480:2004
- DIN EN ISO 14911:1999 Water quality - Determination of dissolved Li<(hoch)+>, Na<(hoch)+>, NH<(Index)4><(hoch)+>, K<(hoch)+>, Mn<(hoch)2+>, Ca<(hoch)2+>, Mg<(hoch)2+>, Sr<(hoch)2+> and Ba<(hoch)2+> using ion chromatography - Method for water and waste water (ISO 14911:1998); G
- DIN EN 14480 Berichtigung 1:2006 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method; German version EN 14480:2004, Corrigenda to DIN EN 14480:2004-11; German version EN 14480:2004/AC:2006
- DIN ISO 2271:1982 Surface active agents; detergents; determination of anionic-active matter (direct two-phase titration procedure)
- DIN EN 14480:2004-11 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method; German version EN 14480:2004
- DIN 25456-4:1999 Neutron fluence measurement - Part 4: Fast-neutron fluence determination with niob activation detectors
- DIN 38405-7:2002-04 German standard methods for examination of water, waste water and sludge - Anions (group D) - Part 7: Determination of cyanides in low polluted water by liquid chromatography of ions or potentiometric titration (D 7)
- DIN EN 14880:2005 Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method; English version of DIN EN 14880
- DIN 54402:2001 Testing of ion exchangers - Determination of the total capacity of anion exchangers
- DIN 54403:2001 Testing of ion exchangers - Determination of the total capacity of cation exchangers
- DIN 54402:1985 Testing of ion exchangers; determination of the total capacity of anion exchangers
- DIN 38405-7:2002 German standard methods for examination of water, waste water and sludge - Anions (group D) - Part 7: Determination of cyanides in low polluted water by liquid chromatography of ions or potentiometric titration (D 7)
Professional Standard - Water Conservancy, Niobium ion titration
- SL 80-1994 Determination of free carbon dioxide (Base titration method )
- SL 86-1994 Determination of inorganic anions in water (Ion chromatography method)
Professional Standard - Chemical Industry, Niobium ion titration
- HG/T 3838-2006 Determination of free sulfur in rubber by potentiometric titration
- HG/T 3838-2008 Rubber.Determination of free sulphur.Potentiometric titration method
Professional Standard - Electron, Niobium ion titration
- SJ/T 10905-1996 Determination of PbO in electronic glass - Extraction / EDTA complexometric titration method
Professional Standard - Non-ferrous Metal, Niobium ion titration
- YS/T 896-2013 Methods for chemical analysis of high purity niobium.Determination of trace impurity element content.Inductively coupled plasma mass spectrometry
- YS/T 861.5-2013 Methods for chemical analysis of niobium-titanium alloy.Part 5:Determination of titanium content.The ammonium ferric sulfate titration
- YS/T 358.10-2011 Methods for chemical analysis of tantalite,columbite concentrate.Part 10:Determination of tin content.Potassium iodate titrimetric method
- YS/T 358.8-2011 Methods for chemical analysis of tantalite,columbite concentrate.Part 8:Determination of ferrous content.Potassium dichromate titrimetric method
- YS/T 358.9-2011 Methods for chemical analysis of tantalite,columbite concentrate.Part 9:Determination of antimony content.Inductively coupled plasma atomic emission spectrometry
- YS/T 358.5-2011 Methods for chemical analysis of tantalite,columbite concentrate.Part 5:Determination of uranium content.Inductively coupled plasma atomic emission spectrometry
- YS/T 358.7-2011 Methods for chemical analysis of tantalite,columbite concentrate.Part 7:Determination of iron content.Inductively coupled plasma atomic emission spectrometry
- YS/T 861.1-2013 Methods for chemical analysis of niobium-titanium alloy.Part 1:Determination of aluminium,nickel,silicon,iron,chromium, copper and tantalum content.Inductively coupled plasma atomic emission spectrometry
- YS/T 358.6-2011 Methods for chemical analysis of tantalite,columbite concentrate.Part 6:Determination of thorium oxide content.Inductively coupled plasma atomic emission spectrometry
- YS/T 271.2-1994 Xanthate Chemical Analysis Method Acetic Acid Titration Determination of Free Alkali Content
European Committee for Standardization (CEN), Niobium ion titration
- EN ISO 14911:1999 Water Quality - Determination of Dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ Using Ion Chromatography - Method for Water and Waste Water ISO 14911:1998
- EN 14480:2004 Surface active agents - Determination of anionic surface active agents - Potentiometric two-phase titration method
- EN 14669:2005 Surface active agents - Determination of anionic surface active agents and soaps in detergents and cleansers - Potentiometric two-phase titration method
- EN 14880:2005 Surface active agents - Determination of inorganic sulphate content in anionic surface active agents - Potentiometric lead selective electrode titration method
CZ-CSN, Niobium ion titration
- CSN 66 6141-1987 Surface active agents. Detergents. Deter- mination of anionicactive-matter (direct two-phase titration procedu?e)
- CSN 42 0630 Cast.4-1984 Chemical analysis of non-ferrous metals and alloys. Zinc alloys. Determination of magnesium by the atomic absorption method and titrimetric method
- CSN 42 0630 Cast.2-1984 Chemical analysis of non-ferrous metals and alloys. Zinc alloys. Determination of aluminum by the titrimetric and atomic absorption method
- CSN 42 0641 Cast.7-1984 Nickel alloys. Determination of chromium by the titrimetric method and atoraic absorption method
- CSN 64 0239-1954
Taiwan Provincial Standard of the People's Republic of China, Niobium ion titration
- CNS 8854-1982 Method for Determining Arsenic in Ores (Titration Method After Separating Arsenic by Distillation)
- CNS 8855-1982 Method for Determining Arsenic in Ores(Titration Method After Separating Arsenic with Hydrogen Sulfide)
- CNS 8856-1982 Method for Determining Arsenic in Ores(Titration Method After Separating Arsenic as Silver Arsenate)
- CNS 6199-1980 Determination of Apparent Free Phenols Content of Tritolyl Phosphate for Industrial Use(Volumetric Method)
- CNS 7510-1981 Method for Determination of Nikel in Ores (EDTA Titration Method After Sepating Ni with Dimethylglyoxime)
AT-ON, Niobium ion titration
- ONORM ISO 2271:1987 Surface active agents; detergents; determination of anionic-active matter (direct two-phase titration procedure)
TH-TISI, Niobium ion titration
- TIS 2021-2000 Ammonium sulphate for industrial use.determination of free acidity.titrimetric method
TR-TSE, Niobium ion titration
- TS 2078-1975 AMMONIUM SULPHATE FOR INDUSTRIAL USE DETERMINATION OF FREE ACIDITY TITRIMETRIC METHOD
Professional Standard - Electricity, Niobium ion titration
- DL/T 954-2005 Analysis of water and steam in fossil fuel power plant Determination of fluoride, acetate, formate, chloride, nitrite, nitrate, phosphate and sulfate by ion chromatography
- DL/T 301-2011 Analytical method of steam and water in power plant. Determination of trace cations by ion chromatography
Professional Standard - Aviation, Niobium ion titration
- HB/Z 339.2-1999 Analytical method of aluminum alloy chromic acid anodizing solution for determination of chloride ion content by potentiometric titration
- HB/Z 5104.3-1999 Analysis method for aluminum alloy sulphide acid anodizing solution Determination of chloride Ion content through potentiometric titration
- HB 7716.15-2022 Spectrometric analysis of titanium alloys – Part 15：Determination of tungsten, niobium, tantalum, nickel content –Inductively coupled plasma atomic emission spectrometric method
Professional Standard - Coal, Niobium ion titration
- MT/T 202-2008 Determination of calcium ion and magnesium ion in coalmine water
- MT/T 252-2000 Determination method of potassium ion and sodium ion in coal mine water
- MT/T 203-1995 Determination method of calcium ion and magnesium ion in coal mine water
- MT 252-1991 Determination method of potassium ion and sodium ion in coal mine water
国家安全生产监督管理总局, Niobium ion titration
- MT/T 202-2007 Determination of calcium ions and magnesium ions in coal mine water
Professional Standard - Tobacco, Niobium ion titration
- YC/T 275-2008 Determination of citrate,phosphate and acetate in cigarette paper-Ion chromatography method
ZA-SANS, Niobium ion titration
- SANS 7393-3:2005 Water quality - Determination of free chlorine and total chlorine Part 3: Iodometric titration method for the determination of total chlorine
- SANS 163-2:1995 Water quality - Determination of dissolved anions by liquid chromatography of ions Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
- SANS 163-1:1992 Water quality - Determination of dissolved fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulfate ions, using liquid chromatography of ions Part 1: Method for water with low contamination
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Niobium ion titration
- GJB 5969.7-2007 Test methods for microsphere uranium dioxide with coated niobium for submarine nuclear power plant.Part 7: Determination of boracium by methyl alcohol distillation.ion selective electrode method
- GJB 5969.10-2007 Test methods for microsphere uranium dioxide with coated niobium for submarine nuclear power plant.Part 10: Determination of lead, zine and cadmium by ion chromatography
未注明发布机构, Niobium ion titration
- GJB 8793.7-2015 Testing method for niobium-coated uranium dioxide microspheres used in submarine nuclear power plants Part 7: Determination of boron Methanol distillation separation-ion selective electrode method
- GJB 8793.10-2015 Testing method for niobium-coated uranium dioxide microspheres for use in submarine nuclear power plants - Part 10: Determination of lead, zinc and cadmium by ion chromatography
Professional Standard - Environmental Protection, Niobium ion titration
- HJ/T 84-2001 Water quality.Determination of inorganic anions.Ion chromatography method
HU-MSZT, Niobium ion titration
Professional Standard - Rare Earth, Niobium ion titration
- XB/T 617.5-2014 Chemical analysis methods for neodymium iron boron alloy.Part 5:Determination of zirconium,niobium,molybdenum,tungsten and titanium contents.Inductively coupled plasma atomic emission spectrometry
Professional Standard - Geology, Niobium ion titration
- DZ/T 0064.51-1993 Groundwater quality testing methods - Determination of chloride, fluoride, bromide, nitrate and sulfate by ion chromatography
- DZ/T 0064.49-2021 Analytical methods for groundwater quality - Part 49: Determination of carbonate, bicarbonate and hydroxide ions by titration
- DZ/T 0064.47-1993 Groundwater Quality Testing Method Titration Determination of Free Carbon Dioxide
Henan Provincial Standard of the People's Republic of China, Niobium ion titration
- DB41/T 778-2013 Determination of Chloride Ion Content in Chemical Fertilizers by Ion Chromatography
Japanese Industrial Standards Committee (JISC), Niobium ion titration
- JIS H 1632-2:2014 Titanium.ICP atomic emission spectrometry.Part 2: Determination of palladium, manganese, iron, magnesium, silicon, aluminium, vanadium, nickel, chromium, tin, copper, molybdenum, zirconium, niobium, tantalum, cobalt and yttrium
- JIS H 1289:2015 Nickel and nickel alloys -- ICP atomic emission spectrometric method -- Determination of niobium, tantalum and zirconium
NL-NEN, Niobium ion titration
- NEN 2863-1989 Fruit juices Determination of free tartaric acid content of grape juice - Titrimetric method
National Metrological Verification Regulations of the People's Republic of China, Niobium ion titration
Guangdong Provincial Standard of the People's Republic of China, Niobium ion titration
- DB44/T 417-2007 Determination of bromate in drinking water using ion chromatography
Ningxia Provincial Standard of the People's Republic of China, Niobium ion titration
VN-TCVN, Niobium ion titration
- TCVN 5455-1998 Surface active agents.Dertergents.Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure
FI-SFS, Niobium ion titration
IECQ - IEC: Quality Assessment System for Electronic Components, Niobium ion titration
- PQC 1-1997 Fixed Capacitors for Use in Electronic Equipment Sectional Specification: Fixed Niobium Capacitors with Solid Electrolyte
国家质量监督检验检疫总局, Niobium ion titration
- SN/T 4815-2017 Determination of fluoride ions in imported and exported food animals by ion chromatography