ZH
RU
ES
Modulus of Elasticity and Bending Modulus
Modulus of Elasticity and Bending Modulus, Total:82 items.
In the international standard classification, Modulus of Elasticity and Bending Modulus involves: Wood-based panels, Wood, sawlogs and sawn timber, Construction materials, Glass, Chipless working equipment, Construction industry, Structures of buildings, Ceramics, Plastics, Protection of and in buildings, Valves, Rubber and plastics products, Cellular materials, Continuous handling equipment, Iron and steel products.
PT-IPQ, Modulus of Elasticity and Bending Modulus
- NP EN 310-2002 Wood-based panels Determination of modulus of elasticity in bending and of bending strength
Danish Standards Foundation, Modulus of Elasticity and Bending Modulus
- DS 1103.2:1976 Test methods for rigid flat sheets. Modulus of elasticity in bending and bending strength
- DS 434.5:1989 Lightweight aggregate concrete components. Determination of modules of elasticity
- DS/EN 1680:1998 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
- DS 433.5:1989 Aerated lightweight concrete components. Modules of elasticity
- DS 423.25:1984 Testing of concrete. Hardened concrete. Modulus of elasticity
RU-GOST R, Modulus of Elasticity and Bending Modulus
- GOST 16483.9-1973 Wood. Methods for determination of modulus of elasticity in static bending
- GOST 21523.7-1987 Modified wood. Method for determination of modulus of elasticity in static bending
- GOST 21554.1-1981 Sawn timber and blanks. Methods for determination of modulus of elasticity in static bending
- GOST 9900-1985 Inorganic glass and glasscrystal materials. Methods for the determination of elastic module at cross static bending
- GOST 10635-1988 Particle boards. Methods for determinining of ultimate strength and modulus of elasticity in bendind
- GOST 9625-1987 Laminated glued wood. Method for determination of strength and elasticity module in static bending
- GOST 9625-2013 Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
- GOST 21523.9-1987 Modified wood. Method for determination of modulus of elasticity in tension
- GOST 24452-1980 Concretes. Methods of prismatic compressive strength, modulus of elasticity and Poisson's ratio determination
- GOST 22346-1977 Flexible cellular plastics. Method for the determination cold-resistance
- GOST 21523.8-1993 Modified wood. Method for determination of modulus of elasticity in compression
- GOST 21523.8-1987 Modified wood. Method for determination of modulus of elasticity in compression
- GOST 9622-1987 Laminated glued wood. Methods for determination of ultimate strenght and modulus of elasticity in tension
- GOST 9623-1987 Laminated glued wood. Method for determination of ultimate strength and modulus of elasticity in compression
ESDU - Engineering Sciences Data Unit, Modulus of Elasticity and Bending Modulus
- ESDU 88035 B-1994 Maximum inelastic bending moments and form factors for symmetric bending of beams.
- STRUCT 02.01.10 A-1979 Buckling stress coefficients for slightly curved plates with clamped edges.
- STRUCT 01.06.02-1956 Form factors for flanged sections under combined bending and axial load.
- STRUCT 01.06.01-1956 Form factors for circular sections under combined bending and axial load.
- ESDU 18003-2019 Form factors for flanged sections under combined bending and axial load
- STRUCT 02.03.18 A-1977 Buckling stress coefficients for curved plates in shear (axial length exceeding circumferential length@ edges simply-supported).
- STRUCT 02.03.19 B-1979 Buckling stress coefficients for curved plates in shear (circumferential length exceeding axial length@ edges simply-supported).
- STRUCT 01.06.03-1956 Form factors for angle@ tee and channel sections under combined bending and axial load.
American Society for Testing and Materials (ASTM), Modulus of Elasticity and Bending Modulus
- ASTM C120-06e1 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
- ASTM C120-06 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
- ASTM C120/C120M-09 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
- ASTM C120-00 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
- ASTM C120/C120M-12 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
- ASTM C120-05 Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity)
- ASTM D747-99 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
- ASTM C120/C120M-15 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
RO-ASRO, Modulus of Elasticity and Bending Modulus
- STAS 7157-1978 FIBERBOARDS HARDBOARDS Determination of strength and elasticity modulus at static bending
- STAS 337/2-1989 Wood DETERMINATIONOFMODULUS OF ELASTICITY IN STATIC BENDING
Standard Association of Australia （SAA）, Modulus of Elasticity and Bending Modulus
- AS/NZS 4266.5(Int):2001 Reconstituted wood-based panels - Methods of test - Modulus of elasticity in bending and bending strength
CZ-CSN, Modulus of Elasticity and Bending Modulus
- CSN 49 0147-1989 Tests of wood based panels. Method of apparent modulus of elasticity in bending and of bending strength determination
- CSN 21 0607-1990 Forming machines. Bending machines. Main parameter series
- CSN 49 0124-1980 Resonant method for determination of modulus of elasticity and of tho loga- rithmic decrement of vibration
ZA-SANS, Modulus of Elasticity and Bending Modulus
- SANS 6015:2004 Modulus of elasticity and modulus of rupture in static bending of fibreboards
PL-PKN, Modulus of Elasticity and Bending Modulus
- PN D04117-1963 Physical and mechanical properties ol ?imber. Determination of the mo- dulus of etasticity at static bending
(U.S.) Plastic Pipe Association, Modulus of Elasticity and Bending Modulus
- PPI TN-19-2005 Resistance to Ring Bending ?Pipe Stiffness (PS), Ring Stiffness Constant (RSC) and Flexibility Factor (FF) for Buried Gravity Flow Pipes
The American Road & Transportation Builders Association, Modulus of Elasticity and Bending Modulus
AASHTO - American Association of State Highway and Transportation Officials, Modulus of Elasticity and Bending Modulus
British Standards Institution (BSI), Modulus of Elasticity and Bending Modulus
- BS 7604-2:1992 Method for determination of stress-optical coefficient of glass. Bending test
- BS EN 12509:2001 Timber Poles for Overhead Lines - Test Methods - Determination of Modulus of Elasticity, Bending Strength, Density and Moisture Content
- BS EN 1680:1997 Plastics piping systems. Valves for polyethylene (PE) piping systems. Test method for leaktightness under and after bending applied to the operating mechanism
German Institute for Standardization, Modulus of Elasticity and Bending Modulus
- DIN 53457:1987 Testing of plastics; determination of the elastic modulus by tensile, compression and bend testing
- DIN 18800-2:1990 Structural steelwork; analysis of safety against buckling of linear members and frames
- DIN EN 1680:1997 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
- DIN EN 1680:1997-03 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism; German version EN 1680:1997
- DIN EN 1680:2023-11 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms; German and English version prEN 1680:2023 / Note: Date of issue 2023-10-13*Intended as re...
- DIN 6935 Bb.1:2010 Cold bending of flat rolled steel - Supplement 1: Factors determining the correction value for calculating length of flats prior to bending
American Welding Society (AWS), Modulus of Elasticity and Bending Modulus
- WRC 179:1972 Stress Indices and Flexibility Factors for Moment Loadings on Elbows and Curved Pipe
IT-UNI, Modulus of Elasticity and Bending Modulus
International Organization for Standardization (ISO), Modulus of Elasticity and Bending Modulus
- ISO 10345-2:1992 Glass; determination of stress-optical coefficient; part 2: bending test
- ISO 6721:1983 Plastics; Determination of damping properties and complex modulus by bending vibration
- ISO 9856:2003/Amd 1:2012 Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus; Amendment 1
WRC - Welding Research Council, Modulus of Elasticity and Bending Modulus
- BULLETIN 179-1972 STRESS INDICES AND FLEXIBILITY FACTIORS FOR MOMENT LOADINGS ON ELBOWS AND CURVED PIPE
American Gear Manufacturers Association, Modulus of Elasticity and Bending Modulus
- AGMA 908-B89-1989 Geometry Factors for Determining the Pitting Resistance and Bending Strength of Spur, Helical and Herringbone Gear Teeth
YU-JUS, Modulus of Elasticity and Bending Modulus
- JUS U.J6.236-1983 Testing of plastics and damped laminated systems.Bending vibration test;determination of complex modulus of elasticity
Taiwan Provincial Standard of the People's Republic of China, Modulus of Elasticity and Bending Modulus
- CNS 12702-1990 Method of Test for Flastic Modulus of High Performance Ceramics
Professional Standard - Ferrous Metallurgy, Modulus of Elasticity and Bending Modulus
- YB/T 5244-1993 Positive temperature coefficient constant elastic alloy 3J63
European Committee for Standardization (CEN), Modulus of Elasticity and Bending Modulus
- EN 12509:2001 Timber Poles for Overhead Lines - Test Methods - Determination of Modulus of Elasticity, Bending Strength, Density and Moisture Content
- EN 1680:1997 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism
Professional Standard - Tobacco, Modulus of Elasticity and Bending Modulus
- YC/T 169.4-2002 Testing physical and chemical characteristics of tow for cigarette----Part 4: Crimp index and percentage crimp recovery
Group Standards of the People's Republic of China, Modulus of Elasticity and Bending Modulus
- T/CSTM 00392-2021 Test method for resilience factor of resilient blanket for LNG storage tank
Association Francaise de Normalisation, Modulus of Elasticity and Bending Modulus
- NF EN 1680:1997 Systèmes de canalisations en plastique - Robinets pour les systèmes de canalisations en polyéthylène (PE) - Méthode d'essai d'étancheité sous et après une flexion appliquée au mécanisme d'entraînement.
Military Standard of the People's Republic of China-General Armament Department, Modulus of Elasticity and Bending Modulus
- GJB 10013-2021 Test method for error coefficient of ballistic missile inertial platform
Lithuanian Standards Office , Modulus of Elasticity and Bending Modulus
- LST EN 1680-2002 Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms
GOSTR, Modulus of Elasticity and Bending Modulus
- GOST 22346-2017 Cellular flexible plastics. Method for determination cold-resistance
GM Global, Modulus of Elasticity and Bending Modulus
- GMW 16973-2013 Coefficient of Linear Thermal Expansion (CLTE) for Elastomers Issue 1; English
AENOR, Modulus of Elasticity and Bending Modulus
- UNE-EN 1680:1997 PLASTICS PIPING SYSTEMS. VALVES FOR POLYETHYLENE (PE) PIPING SYSTEMS. TEST METHOD FOR LEAKTIGHTNESS UNDER AND AFTER BENDING APPLIED TO THE OPERATING MECHANISM.
Japanese Industrial Standards Committee (JISC), Modulus of Elasticity and Bending Modulus
- JIS K 6378:2010 Light conveyor belts -- Determination of the relaxed elastic modulus