ZH
RU
ES
Specific resistance tester
Specific resistance tester, Total:500 items.
In the international standard classification, Specific resistance tester involves: Electricity. Magnetism. Electrical and magnetic measurements, Linear and angular measurements, Hand-held tools, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Wastes, Environmental protection, Power stations in general, Textile machinery, Conducting materials, Ground service and maintenance equipment, Insulating fluids, Inorganic chemicals, Rotating machinery, Thermodynamics and temperature measurements, Quality, Equipment for petroleum and natural gas industries, Textile fibres, Semiconductor devices, Products of the textile industry, Powder metallurgy, Testing of metals, Protection of and in buildings, Paints and varnishes, Refractories, Welding, brazing and soldering, Power transmission and distribution networks, Air quality, Electrical wires and cables, Transformers. Reactors, Products of the chemical industry, Electromechanical components for electronic and telecommunications equipment, Protection against crime, Equipment for the chemical industry, Electrical and electronic testing, Electrical equipment for working in special conditions, Geology. Meteorology. Hydrology, Milk and milk products, Rubber and plastics products, Insulating materials, Glass, Industrial automation systems, Tyres, Paint ingredients, Resistors, Ceramics, Plastics, Structure and structure elements, Electrical accessories, Semiconducting materials, Non-ferrous metals, Paper and board, Terminology (principles and coordination), Insulation, Nuclear energy engineering, Mining and quarrying, Heat recovery. Thermal insulation, Electronic components in general, Integrated circuits. Microelectronics, Printed circuits and boards, Aircraft and space vehicles in general, Metalliferous minerals, Mechanical testing, Adhesives, Acoustics and acoustic measurements, Earthworks. Excavations. Foundation construction. Underground works, Corrosion of metals, Electronic tubes, Surface treatment and coating, Magnetic materials, Metrology and measurement in general, Materials for aerospace construction, Environmental testing, Occupational safety. Industrial hygiene, Protection against fire, Lubricants, industrial oils and related products.
National Metrological Technical Specifications of the People's Republic of China, Specific resistance tester
- JJF(纺织) 097-2021 Calibration Specification for Fiber Specific Resistance Meters
- JJF(纺织)097-2021 Calibration Specification for Fiber Specific Resistance Meters
- JJF 1285-2011 Calibration Specification for Surface Resistance Tester
- JJF 1620-2017 Calibration Specification for Battery Internal Resistance Testers
- JJF(机械) 073-2009 Calibration specification for loop resistance tester
- JJF(纺织) 100-2021 Calibration Specification for Textile Electrical Resistance Testers
- JJF(纺织)100-2021 Calibration Specification for Textile Electrical Resistance Testers
- JJF 2000-2022 Calibration specification for loop impedance/prospective short-circuit current tester
- JJF 1379-2012 Calibration Specification of Thermistor Thermometers
- JJF(机械) 019-2008 Calibration specification for motor temperature rise resistance measuring instrument
- JJF 1444-2014 Calibration Specification for D. C. Comparator Bridges for Measuring Temperatures
- JJF 1618-2017 Calibration Specification for Insulating Oil Dielectric Dissipation Factor and Volume Resistivity Testers
- JJF 1380-2012 Program of Pattern Evaluation of Capacitive and Resistive Grain Moisture Testers
- JJF 1843-2020 Calibration Specification for SAR Testing Systems
- JJF 1339-2012 Calibration Specification for Electro-acoustical Measurement Instruments
- JJF 1856-2020 Calibration Specification for Partial Discharge Testers—Part 1:Ultrasonic Partial Discharge Testers
- JJF 2039-2023 Calibration Specification for Battery Charge & Discharge Testers
National Metrological Verification Regulations of the People's Republic of China, Specific resistance tester
- JJG 1052-2009 Verification Regulation of Loop Resistance Tester and DC Resistance Meters
- JJG 508-2004 Resistivity Measuring Instruments with Four - Probe Array Method
- JJG 984-2004 Earth-Continuity Testers
- JJG 508-1987 Verification Regulation of Resistivity Measuring Instruments with Four-Prope Array Method
- JJG(电子) 05001-1987 RCJ-3 Insulation Resistance Tester Trial Verification Regulations
- JJG 159-2020 Concrete resistivity tester
- JJG(民航) 0089-2006 Verification Regulation of 906-10247-2 Loop Resistance Tester
- JJG(电子) 05018-1988 Trial Verification Regulations for HM2672 Insulation Resistance Measuring Instrument
- JJG 690-2003 Verification Regulation of High Insulation Resistance Meters
- JJG 623-1989 Verification Regulation of Resistance Strain Gauge Indicator
- JJG(铁道) 114-1989 Trial Verification Regulations for Railway Wheelset Contact Resistance Measuring Instrument
- JJG 1129-2016 Instrument for Measuring Touching Resistance of Railway Wheelsets
- JJG 891-2019 Capacitive and Resistive Grain Moisture Testers
- JJG(电子) 05013-1988 AV2551 type potentiometer dynamic contact resistance change measuring instrument trial verification regulations
- JJG 1180-2021 Power Frequency GroundImpedance Testers for Large Grounding Grid
- JJG(烟草) 02-2014 Calibration rules for cigarette draw resistance and filter rod pressure drop tester
- JJG(烟草)02-2014 Calibration rules for cigarette draw resistance and filter rod pressure drop tester
- JJG 891-1995 Verification Regulation of Instruments for Measuring The Moisture Content of Grain With Capacitance and Resistance Methods
- JJG 795-2016 Withstanding Voltage Testers
- JJG 795-2004 Withstanding Voltage Testers
- JJG 1112-2015 Testers for Relaying Protection
- JJG(粤) 027-2014 Touch Current Testers
- JJG 843-2022 Leakage Current Tester
- JJG 1188-2022 Medical Leakage Current Testers
- JJG(电子) 04016-1988 BJ2984 (QR-3) Trial Verification Regulations for Transient Thermal Resistance Tester of Crystal Transistor
- JJG 869-2002 Verification Regulation of Electro-acoustical Measuring Instrument for Telephone Sets
- JJG 795-1992 Verification Regulation of Withstanding Voltage Tester
Professional Standard - Electricity, Specific resistance tester
- DL/T 967-2005 Verification regulation of loop resistance tester and DC resistance high-speed tester
- DL/T 1287-2013 Determination of electrical resistivity of coal ash in laboratory
- DL/T 1742-2017 Differential Resistance Measuring Instruments
- DL/T 845.3-2004 General specifications for measuring resistance equipments Part 3: DC resistance meters
- DL/T 845.4-2004 General specifications for measuring resistance equipments Part 4: loop resistance measurement testor
- DL/T 845.4-2019 General Specifications for Resistance Measuring Devices Part 4: Loop Resistance Testers
- DL/T 845.3-2019 General Specifications for Resistance Measuring Devices Part 3: DC Resistance Testers
- DL/T 845.2-2004 General specifications for measuring resistance equipments Part 2: power frequency earth resistance testers
- DL/T 845.2-2020 General Specifications for Resistance Measuring Devices Part 2: Power Frequency Grounding Resistance Tester
- DL/T 963-2005 General technical specifications of the transformation ratio tester
- DL/T 1694.5-2017 Calibration specifications for high-voltage testing instruments and equipment Part 5: Zinc oxide arrester resistive current tester
- DL/T 987-2005 General technical conditions of resistive current tester for zinc oxide surge arrester
- DL/T 987-2017 General technical requirements for zinc oxide arrester resistive current tester
- DL/T 1397.5-2014 General specification for DC power system test equipments of electric power system.Part 5: Battery internal resistance tester
- DL/T 1254-2013 Specification for appraisal of elastic wire resistance type sensor
- DL/T 2261-2021 Technical requirements for mobile hand-held electric tool insulation resistance tester
- DL/T 474.1-2006 Guide for insulation test on site Insulation resistance、dielectric absorption ratio and polarization index test
- DL/T 474.1-2018 Insulation Resistance, Absorption Ratio and Polarization Index Tests
- DL 474.1-1992 Insulation Resistance, Absorption Ratio and Polarization Index Tests
- DL/T 846.14-2023 General technical conditions for high voltage testing equipment Part 14: Insulating oil dielectric loss factor and volume resistivity tester
- DL/T 826-2002 On-site Testing equipment for alternating current electricity meters
IN-BIS, Specific resistance tester
Professional Standard - Machinery, Specific resistance tester
- JB/T 7585-1994 D.C. low resistance tester
- JB/T 7585-2013 Tester for direct current low-resistence
- JB/T 8537-1997 Laboratory test method of dust specific electric resistance
- JB/T 8537-2010 Testing method for dust resistivity in lab
- JB/T 8537-2023 Testing method for dust resistivity in laboratory
- JB/T 5469-1991 Testing instrument of total loss ratio of single electric steel sheet (strip)
- JB/T 9233.13-1999 General methods of testing the performance of industrial process measurement and control instruments.Contact resistance
- JB/T 7129-2008 Test method for per meter resistance in continuous measurement
- JB/T 7129-1993 Meter resistance continuous test method
- JB/T 4279.2-1994 Enamelled winding wire test equipment verification method DC resistance test device
Korean Agency for Technology and Standards (KATS), Specific resistance tester
- KS C 1302-2014(2019) Insulation resistance testers(battery operated)
- KS M 0104-1991
- KS C IEC 61788-11-2005(2015) Superconductivity－Part 11：Residual resistance ratio measurement－Residual resistance ratio of Nb3Sn composite superconductors
- KS C IEC 61788-4:2003 Superconductivity－Part 4：Residual resistance ratio measurement－Residual resistance ratio of Nb－Ti composite superconductors
- KS C IEC 61788-4-2017(2022) Superconductivity－Part 4：Residual resistance ratio measurement－Residual resistance ratio of Nb－Ti composite superconductors
- KS C IEC 61788-4:2017 Superconductivity－Part 4：Residual resistance ratio measurement－Residual resistance ratio of Nb－Ti composite superconductors
- KS C 2603-1980(2020) Testing Method for Conductor-Resistance and Resistivity of Metallic Resistance materials
- KS H ISO 5764-2006(2016) Milk－Determination of freezing point－Thermistor cryoscope method
- KS C 0263-2002(2022) Testing methods of resistivity germanium
- KS C 0263-2002(2017) Testing methods of resistivity germanium
- KS C IEC 60512-25-7-2009(2009) Connectors for electronic equipment－Tests and measurements－Part 25-7：Test 25g：Impedance, reflection coefficient, and voltage standing wave ratio(VSWR)
- KS M ISO 16392:2010 Tyres-Electrical resistance-Test method for measuring electrical resistance of tyres on a test rig
- KS C 2608-2013(2018) Testing method of electrical resistance-temperature characteristics of metallic resistance materials
- KS C 5115-7-2001 Fixed resistors for use in electronic equipment－Part 7：Sectional specification：Fixed resistor networks in whichnot all resistors are individually measurable
- KS C 2711-2001 Test method for PTC thermistors
- KS C IEC 60512-25-7:2009 Connectors for electronic equipment-Tests and measurements-Part 25-7:Test 25g:Impedance, reflection coefficient, and voltage standing wave ratio(VSWR)
- KS C IEC 60512-25-7:2014 Connectors for electronic equipment－Tests and measurements－Part 25-7：Test 25g：Impedance, reflection coefficient, and voltage standing wave ratio(VSWR)
- KS B ISO 148-2-2004(2009) Metallic materials－Charpy pendulum impact test－Part 2：Verification of test machines
- KS C 5115-6-2001 Fixed resistors for use in electronic equipment－Part 6：Sectional specification：Fixed resistor networks withindividually measurable resistors
- KS C IEC 62397-2012(2022) Nuclear power plants－Instrumentation and control important to safety－Resistance temperature detectors
- KS C IEC 60051-6:2013 Direct acting indicating analogue electrical measuring instruments and their accessories－Part 6：Special requirements for ohmmeters(impedance meters) and conductance meters
- KS L ISO 8301-2006(2021) Thermal insulation－Determination of steady-state thermal resistance and related properties－Heat flow meter apparatus
- KS C IEC 60345-2002(2017) Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
- KS C 2711-2003 Test method for PTC thermistors
- KS C 4217-2006(2011) Switched reluctance motors
- KS C IEC 62397-2012(2017) Nuclear power plants－Instrumentation and control important to safety－Resistance temperature detectors
- KS C 5115-71-2001 Fixed resistors for use in electronic equipment-Part 7:Blank detail specification:Fixed resistor networks in whichnot all resistors are individually measurable Assesment level E
- KS C IEC 60093:2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
- KS B 6509-1991(2011) Test Methods for Electro-hydraulic Proportional Metering Valves
- KS M ISO 179-2-2012(2022) Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
- KS M ISO 179-2-2012(2017) Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
- KS D 0296-2019 Standard practice for determining area specific resistance of oxide scale formed on stainless steel plates
- KS C 2129-1996(2001) TESTING METHODS FOR DC RESISTANCE OR CONDUCTANCE OF INSULATING MATERIALS
- KS C IEC 60645-5A:2017 Electroacoustics — Audiometric equipment — Part 5：Instruments for the measurement of aural acoustic impedance/admittance
- KS K 0170-2014 Test method for electrical surface resistivity of fabrics
- KS K 0170-2019 Test method for electrical surface resistivity of fabrics
- KS M ISO 179-1-2012(2017) Plastics－Determination of Charpy impact properties－Part 1：Non-instrumented impact test
- KS M ISO 179-1:2022 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Specific resistance tester
- GB/T 28030-2011 Earth continuity tester
- GB/T 14342-1993 Testing method for specific resistance of synthetic staple fibres
- GB/T 12968-1991 Eddy current decay method for measurement of resistivity and residual resistance ratio of pure metals
- GB/T 14342-2015 Man-made fiber.Test method for specific resistance of staple fibers
- GB/T 16913.10-1997 Methods of dust character test--Part 10: Determination of electrical resistivity--Disk method
- GB/T 3048.5-1994 Test methods for determining electrical properties of electric cables and wires.Determining insulation resistance.Comparison-galvanometer method
- GB/T 25897-2010 Superconductivity:Residual resistance ratio measurement of Nb-Ti composite superconductors
- GB/T 6146-1985 Test method for resistivity of precision resistance alloys
- GB/T 6146-2010 Test method for resistivity of precision resistance alloys
- GB/T 3413-2008 Instrument for dam monitoring.Embedded Cu resistance thermometer
- GB/T 32192-2015 Withstanding voltage tester
- GB/T 6148-1985 Test method for temperature-resistance coefficient of precision resistance alloys
- GB/T 6148-2005 Test method for temperature-resistance coefficient of precision resistance alloys
- GB/T 20160-2006 Recommended practice for testing insulation resistance of rotating machinery
- GB/T 32191-2015 Leakage Current Tester
- GB/T 3410.1-2008 Instrument for dam monitoring.joint meter.Part 1:Unbonded elastic wire resistance joint meter
- GB/T 19878-2005 General specifications for capacitance type & resistance type grain moisture tester
- GB/T 11446.4-1997 Test methods for resistivity of electronic grade water
- GB/T 11446.4-2013 Test method for resistivity of electronic grade water
- GB/T 19248-2003 Test method for measuring the resistance of package leads
- GB/T 12631-1990 Test method for resistance of conductor of printed boards
- GB/T 22264.6-2009(英文版) Fixed digital electric measuring instruments—Part 6: Special requirements for insulation resistance meters
- GB/T 7341.5-2018 Electroacoustics.Audiometric equipment.Part 5:Instruments for the measurement of aural acoustic impedance/admittance
- GB/T 16913.11-1997 Methods of dust character test--Part 11: Determination of field resistivity--Concentric rings method by means of filtration
- GB/T 32514.2-2016 Resistance welding.Welding current measurement for resistance welding.Part 2:Welding current meter with current sensing coil
- GB/T 6587.4-1986 Vibration tests for electronic measuring instruments
- GB/T 6587.5-1986 Shock tests for electronic measuring instruments
- GB/T 6587.6-1986 Transportation tests for electronic measuring instruments
- GB/T 6587.2-1986 Temperature tests for electronic measuring instruments
- GB/T 6587.3-1986 Humidity tests for electronic measuring instruments
- GB/T 15662-1995 Method of testing volume resistivity of conducting and antistatic plastics
Taiwan Provincial Standard of the People's Republic of China, Specific resistance tester
Professional Standard - Electron, Specific resistance tester
- SJ/T 11385-2008 General specification of insulation resistance tester
- SJ/T 11386-2008 General specification of earth coninuity tester
- SJ/T 10314-1992 Generic specification of resistivity measuring instrument with four-point probe
- SJ/T 10690-1996 General specification for digital directcurrent micro resistance measuring instruments
- SJ/T 10300-1991 Test methods of capacitance measuring instruments
- SJ 20515-1995 Test method for sheet resistance of gold plating layer
- SJ/T 10092-1991 Test methods for vacuum electric resistance furnace for use in electronic equipment
- SJ/T 10095-1991 Test methods for hydrogen electric resistance furnace for electronic equipment
- SJ/Z 9010.7-1987 Measurements of electrical properties of electronic tubes and valves--Part 7: Measurement of equivalent noise resistance
- SJ/Z 9010.12-1987 Measurements of electrical properties of electronic tubes and valves--Part 12: Methods of measuring for electrode resistance, transcondductance, amplification factor, conversion resistance and conversion transconductance
Group Standards of the People's Republic of China, Specific resistance tester
Professional Standard - Textile, Specific resistance tester
British Standards Institution (BSI), Specific resistance tester
- BS EN 61788-11:2011 Superconductivity. Residual resistance ratio Measurement. Residual resistance ratio of Nb3Sn composite superconductors
- BS EN 61788-4:2011 Superconductivity. Residual resistance ratio Measurement. Residual resistance ratio of Nb-Ti composite superconductors
- BS EN 61788-4:2001 Superconductivity - Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
- BS EN 61788-4:2016 Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
- BS EN IEC 61788-4:2020 Superconductivity - Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
- 18/30382796 DC BS EN 61788-4. Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
- BS EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements - Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
- BS EN IEC 61788-23:2021 Tracked Changes. Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of cavity-grade Nb superconductors
- 19/30390197 DC BS EN 61788-23. Superconductivity. Part 23. Residual resistance ratio measurement. Residual resistance ratio of Nb superconductors
- 19/30402599 DC BS EN IEC 61788-23. Superconductivity. Part 23. Residual resistance ratio measurement. Residual resistance ratio of Nb superconductors
- BS ISO 16392:2007 Tyres - Electrical resistance - Test method for measuring electrical resistance of tyres on a test rig
- BS 5823:1979 Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
- ISO 179-1:2023 Plastics. Determination of Charpy impact properties - Non-instrumented impact test
- BS EN ISO 179-2:2020 Plastics. Determination of Charpy impact properties - Instrumented impact test
- BS EN 14701-2:2006 Characterization of
sludges - Filtration
properties -
Part 2: Determination of the specific
resistance to filtration
- BS EN ISO 11092:2014 Textiles. Physiological effects. Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
- 23/30473276 DC BS EN IEC 61788-23. Superconductivity - Part 23. Residual resistance ratio measurement. Residual resistance ratio of cavity-grade Nb superconductors
- BS EN ISO 10447:2022 Tracked Changes. Resistance welding. Testing of welds. Peel and chisel testing of resistance spot and projection welds
- 21/30439477 DC BS EN ISO 10447. Resistance welding. Testing of welds. Peel and chisel testing of resistance spot and projection welds
- BS ISO 21283:2018 Iron ores. Determination of specific surface area. Test method using air-permeability apparatus (Blaine)
- BS EN ISO 10447:2007 Resistance welding - Peel and chisel testing of resistance spot and projection welds
- BS EN ISO 10447:2015 Resistance welding. Testing of welds. Peel and chisel testing of resistance spot and projection welds
- BS ISO 16392:2017 Tracked Changes. Tyres. Electrical resistance. Test method for measuring electrical resistance of tyres on a test rig
- BS EN 60512-25-1:2001 Connectors for electronic equipment. Test and measurements. Test 25a. Crosstalk ratio
- BS EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2c - Contact resistance variation
- BS EN 60512-2-2:2003 Connectors for electronic equipment - Tests and measurements - Electrical continuity and contact resistance tests - Test 2b - Contact resistance - Specified test current method
United States Navy, Specific resistance tester
American Society for Testing and Materials (ASTM), Specific resistance tester
- ASTM D1169-19 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
- ASTM D1169-19a Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
- ASTM D6110-04e1 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
- ASTM A833-84(2001) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
- ASTM A833-84(1996) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
- ASTM A833-08 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
- ASTM C729-05 Standard Test Method for Density of Glass by the Sink-Float Comparator
- ASTM D2448-85(2019) Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment
- ASTM D1169-02e1 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
- ASTM D1169-02 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
- ASTM D1169-95 Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
- ASTM D116-86(1999) Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications
- ASTM F673-90(1996)e1 Standard Test Methods for Measuring Resistivity of Semiconductor Slices or Sheet Resistance of Semiconductor Films with a Noncontact Eddy-Current Gage
- ASTM E251-92(2003) Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
- ASTM E1269-05 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM E1269-04 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- ASTM D5335-04 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gages
- ASTM D5335-99 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gages
- ASTM D5335-08 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
- ASTM B63-07(2018) Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
- ASTM C729-11(2022) Standard Test Method for Density of Glass by the Sink-Float Comparator
- ASTM E644-98 Standard Test Methods for Testing Industrial Resistance Thermometers
- ASTM E644-08 Standard Test Methods for Testing Industrial Resistance Thermometers
- ASTM E644-02 Standard Test Methods for Testing Industrial Resistance Thermometers
- ASTM D7298-06(2017) Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
German Institute for Standardization, Specific resistance tester
- DIN 51911:1997 Testing of carbon materials - Determination of specific electrical resistance by the current-voltage method - Solid matters
- DIN 51911:2020-12 Testing of carbonaceous materials - Determination of specific electrical resistance by the current-voltage method - Solid materials
- DIN 55667:2009 Paints and varnishes - Determination of electrical conductivity and specific electrical resistivity
- DIN EN 60512-25-7:2005-12 Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient and standing voltage wave ratio (VSWR) (IEC 60512-25-7:2004); German version EN 60512-25-7:2005
- DIN EN ISO 10447:2023-03 Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2022); German version EN ISO 10447:2022
- DIN IEC 60345:1996 Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures (IEC 60345:1971); German version HD 438 S1:1984
- DIN EN IEC 61788-4:2021 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (IEC 61788-4:2020); German version EN IEC 61788-4:2020
- DIN EN 61788-4:2017 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (IEC 61788-4:2016); German version EN 61788-4:2016
- DIN EN ISO 10447:2023 Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2022)
- DIN EN 60512-2-2:2004-01 Connectors for electronic equipment - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Specified test current method (IEC 60512-2-2:2003); German version EN 60512-2-2:2003 / Note: DIN...
- DIN EN 1149-2:1997-11 Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance); German version EN 1149-2:1997
- DIN EN 60512-2-3:2003-01 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests; Test 2c: Contact resistance variation (IEC 60512-2-3:2002); German version EN 60512-2-3:2002 / Note: DIN IEC 60512-2 (1994-05) ...
- DIN EN ISO 179-2:2020-09 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020); German version EN ISO 179-2:2020
- DIN EN ISO 179-1:2022-05 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO/DIS 179-1:2022); German and English version prEN ISO 179-1:2022 / Note: Date of issue 2022-03-25*Intended as replacement for DIN EN ISO 179-1 (2010-11).
- DIN EN ISO 179-1:2010-11 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010); German version EN ISO 179-1:2010 / Note: To be replaced by DIN EN ISO 179-1 (2022-05).
RU-GOST R, Specific resistance tester
- GOST 9506.4-1974 Brushes for electrical machines. The method for determination of specific resistance
- GOST 4.388-1985 Product-quality index system. Electrical measuring instruments for comparison. Index nomenclature
- GOST 19616-1974 Weaving and knitted fabrics. A method for evaluating the specific surface resistance
- GOST 25947-1983 Sintered hard metals. Method of determination of electric resistance
- GOST 8623-1978 Supplementary resistances for electrical measuring instruments. Specifications
- GOST 29104.20-1991 Industrial fabrics. Method for determination of surface specific electric resistance
- GOST R ISO 5764-2011 Milk. Determination of freezing point. Thermistor cryoscope method (reference method)
- GOST 14014-1991 Digital instruments and measuring transducers of voltage, current and resistance. General technical requirements and methods of tests
- GOST 30421-1996 Electrical capacitance, pure resistance and dissipation factor high-voltage meters. General specifications
- GOST 14014-1982 Digital instruments and measuring transducers of voltage, current and resistance. General specifications
- GOST R 50499-1993 Solid electrical insulating materials. Methods of test for volume resistivity and surface resistivity
- GOST R ISO 105-J02-1999 Textiles. Tests for colour fastness. Part J02. Instrumental assessment of relative whiteness
- GOST 7229-1976 Cables, wires and cords. Method of measurement of electrical resistance of conductors
- GOST 19296-1973 Petroleum oils. Test for soda reaction from petroleum oils. Photoelectric colorimeter method
Japanese Industrial Standards Committee (JISC), Specific resistance tester
- JIS H 7306:2012 Superconductivity -- Residual resistance ratio measurement -- Residual resistance ratio of Nb-Ti composite superconductors
- JIS H 7306:2018 Superconductivity -- Residual resistance ratio measurement -- Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
- JIS H 7306:2005 Superconductivity --Part 4: Residual resistance ratio measurement -- Residual resistance ratio of Nb-Ti composite superconductors
- JIS C 5402-2-1:2005 Connectors for electronic equipment -- Tests and measurements -- Part 2-1: Electrical continuity and contact resistance tests -- Test 2a : Contact resistance -- Millivolt level method
- JIS K 3834:1990 Testing methods for specific resistivity recovery characteristic of water filtered by membranes
- JIS C 1202:1986 Circuit testers
- JIS C 1202:2000 Circuit testers
- JIS K 3822:1990 Testing methods for specific resistivity recovery characteristic of water filtered by ultrafiltration modules
- JIS H 0601:1962 Testing methods of resistivity for germanium
International Electrotechnical Commission (IEC), Specific resistance tester
- IEC 61788-23:2018 Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors
- IEC 61788-23:2021 RLV Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of cavity-grade Nb superconductors
- IEC 61788-23:2021 Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of cavity-grade Nb superconductors
- IEC 61788-4:2020 RLV Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
- IEC 61788-4:2020 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
- IEC 60512-25-7:2004 Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g: Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)
- IEC 62397:2007 Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors
- IEC 62397:2022 Nuclear power plants - Instrumentation and control important to safety - Resistance temperature detectors
- IEC 60512-21-1:2010 Connectors for electronic equipment - Tests and measurements - Part 21-1: RF resistance tests - Test 21a: RF shunt resistance
Association Francaise de Normalisation, Specific resistance tester
- NF C31-888-23*NF EN IEC 61788-23:2018 Superconductivity - Part 23 : residual resistance ratio measurement - Residual resistance ratio of Nb superconductors
- NF C31-888-23*NF EN IEC 61788-23:2021 Superconductivity - Part 23 : residual resistance ratio measurement - Residual resistance ratio of cavity-grade Nb superconductors
- NF EN IEC 61788-23:2021 Supraconductivité - Partie 23 : mesurage du rapport de résistance résiduelle - Rapport de résistance résiduelle des supraconducteurs de Nb à cavités
- NF E11-068:1992 Electronic compartors. Specifications. Test methods.
- NF C31-888-4*NF EN 61788-4:2016 Superconductivity - Part 4 : residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
- NF C31-888-4*NF EN IEC 61788-4:2020 Superconductivity - Part 4 : residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
- NF EN IEC 61788-4:2020 Supraconductivité - Partie 4 : mesurage du rapport de résistance résiduelle - Rapport de résistance résiduelle des composites supraconducteurs de Nb-Ti et de Nb3Sn
- NF EN 60512-25-7:2005 Connecteurs pour équipements électroniques - Essais et mesures - Partie 25-7 : essais 25g : impédance, coefficient de réflexion et rapport d'ondes stationnaires en tension (VSWR)
- NF ISO 16392:2017 Pneumatiques - Résistance électrique - Méthode d'essai pour mesurer la résistance électrique des pneumatiques sur une installation d'essai
- NF E11-062:1985 Electronic comparators. Linear dimensional sensors. Test methods.
- NF E11-067:1992 Electronic comparators. Angular dimensional sensors. Specifications. Test methods.
- NF EN 60512-21-1:2011 Connecteurs pour équipements électroniques - Essais et mesures - Partie 21-1 : essais de résistance aux fréquences radioélectriques - Essai 21a : résistance parallèle aux fréquences radioélectriques
- NF R12-751:2008 Tyres - Electrical resistance - Test method for measuring electrical resistance of tyres on a test rig.
- NF C93-400-25-7*NF EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements - Part 25-7 : test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR).
- NF EN ISO 17654:2011 Soudage par résistance - Essais destructifs des soudures - Essai de pression des soudures par résistance à la molette
- NF EN 60512-2-2:2003 Connecteurs pour équipements électroniques - Essais et mesures - Partie 2-2 : essais de continuité électrique et de résistance de contact Essai 2b : résistance de contact - Méthode du courant d'essai spécifié
- NF C26-915:1965 Méthodes d'essai des vernis isolants - Résistivité transversale et résistivité superficielle.
- NF C26-915/A1:1983 Méthodes d'essai des vernis isolants - Résistivité transversale et résistivité superficielle.
- NF ISO 8716:2002 Véhicules routiers - Pivot d'attelage - Essai de résistance
- NF C93-400-21-1*NF EN 60512-21-1:2011 Connectors for electronic equipment - Tests and measurements - Part 21-1 : R.F. resistance tests - Test 21a : R.F. shunt resistance.
- NF EN 60512-2-3:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 2-3 : essais de continuité électrique et de résistance de contact - Essai 2c : variation de la résistance de contact
- NF EN ISO 10447:2022 Soudage par résistance - Essais des soudures - Essais de pelage et de déboutonnage au burin appliqués aux soudures par résistance par points et par bossages
- NF EN 60512-2-1:2002 Connecteurs pour équipements électroniques - Essais et mesures - Partie 2-1 : essai de continuité électrique et de résistance de contact - Essai 2a : résistance de contact - Méthode du niveau des millivolts
- NF A89-580:2007 Resistance welding - Peel and chisel testing of resistance spot and projection welds.
- NF EN 60645-5:2005 Électroacoustique - Appareillage audiométrique - Partie 5 : instruments pour la mesure de l'impédance ou de l'admittance aurale (impédancemètres ou admittancemètres)
- NF EN 1149-2:1997 Vêtements de protection - Propriétés électrostatiques - Partie 2 : méthode d'essai pour le mesurage de la résistance électrique à travers un matériau (résistance verticale).
- NF EN IEC/IEEE 62582-6:2021 Centrales nucléaires de puissance - Instrumentation et contrôle-commande importants pour la sûreté - Méthodes de surveillance de l'état des matériels électriques - Partie 6 : résistance d'isolement
- NF A89-580*NF EN ISO 10447:2015 Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds
- NF T51-035-2*NF EN ISO 179-2:2020 Plastics - Determination of Charpy impact properties - Part 2 : instrumented impact test
- NF A89-566*NF EN ISO 14329:2004 Resistance welding - Destructive tests of welds - Failure types and geometric measurements for resistance spot, seam and projection welds
- XP P18-481:2022 Essai sur béton durci - Mesure de la résistivité électrique
CENELEC - European Committee for Electrotechnical Standardization, Specific resistance tester
- EN IEC 61788-23:2018 Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors
- EN 60512-21-1:2010 Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance
ES-UNE, Specific resistance tester
- UNE-EN IEC 61788-23:2018 Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors (Endorsed by Asociación Española de Normalización in November of 2018.)
- UNE-EN IEC 61788-23:2021 Superconductivity - Part 23: Residual resistance ratio measurement - Residual resistance ratio of cavity-grade Nb superconductors (Endorsed by Asociación Española de Normalización in November of 2021.)
- UNE-EN IEC 61788-4:2020 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (Endorsed by Asociación Española de Normalización in June of 2020.)
- UNE-EN 60512-21-1:2010 Connectors for electronic equipment - Tests and measurements -- Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance (Endorsed by AENOR in October of 2010.)
- UNE-EN ISO 10447:2023 Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2022)
- UNE-EN 1149-2:1998 Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance)
- UNE-EN ISO 179-2:2021 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020)
国家市场监督管理总局、中国国家标准化管理委员会, Specific resistance tester
- GB/T 25897-2020 Residual resistance ratio measurement—Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
- GB/T 5095.2507-2021 Electromechanical components for electronic equipment—Basic testing procedures and measuring methods—Part 25-7: Test 25g: Impedance, reflection coefficient, and voltage standing wave ratio (VSWR)
GM Europe, Specific resistance tester
- GME 8742-2007 Testing the Specific Volume Resistance of Elastomers, Plastics and Adhesives (English/German; This specification may be applied only for current projects incl. Global Epsilon e (37##). It is Superceded for all future projects and replaced by GMW14711.)
Professional Standard - Petroleum, Specific resistance tester
- SY/T 6972-2013 Through casing resistivity logging tool
- SY/T 6844-2011 Micro conductivity imaging logging tool
- SY 6972-2013 Through casing resistivity logging tool
- SY 6844-2011 Microresistivity Imaging Logging Tool
- SY/T 6974-2013 Electromagnetic propagation resistivity logging tool while drilling
- SY/T 6908-2012 Induction resistivity logging tool while drilling
- SY 6908-2012 Induction Resistivity Logging While Drilling Tool
- SY/T 6482-2000 Data transmission cable tester
- SY/T 5585.4-1993 Earthquake data transmission cable electrical parameter test method DC resistance insulation resistance working capacitance simulation and other tests
国家能源局, Specific resistance tester
Danish Standards Foundation, Specific resistance tester
- DS/EN 61788-11:2011 Superconductivity - Part 11: Residual resistance ratio measurement - Residual resistance ratio of Nb3Sn composite superconductors
- DS/EN IEC 61788-23:2021 Superconductivity – Part 23: Residual resistance ratio measurement – Residual resistance ratio of cavity-grade Nb superconductors
- DS/EN 61788-4:2011 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti composite superconductors
- DS/EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements - Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
- DS/EN 60512-21-1:2010 Connectors for electronic equipment - Tests and measurements - Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance
- DS/EN ISO 10447:2007 Resistance welding - Peel and chisel testing of resistance spot and projection welds
- DS/EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements - Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation
- DS/EN ISO 179-2:2000 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test
- DS/EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
KR-KS, Specific resistance tester
- KS C IEC 61788-23-2023 Superconductivity — Part 23: Residual resistance ratio measurement — Residual resistance ratio of cavity-grade Nb superconductors
- KS C IEC 61788-4-2017 Superconductivity－Part 4：Residual resistance ratio measurement－Residual resistance ratio of Nb－Ti composite superconductors
- KS M ISO 2493-2-2017 Paper and board - Determination of bending resistence-Part2:Taber-type tester
- KS K ISO 14419-2016 Textiles－Oil repellency－Hydrocarbon resistance test
- KS C IEC 60093-2014 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
- KS M ISO 179-1-2022 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
Military Standard of the People's Republic of China-General Armament Department, Specific resistance tester
- GJB/J 3353-1998 Calibration procedures for extinction ratio tester
- GJB 8681-2015 Calibration procedures for conductivity and volume resistance testers of solid explosives
- GJB 360.33-1987 Test methods for electronic and electrical components Contact resistance testing
- GJB 360.29-1987 Test methods for electronic and electrical components DC resistance test
- GJB 360.28-1987 Test methods for electronic and electrical components Insulation resistance test
- GJB 8806-2015 Test method for high temperature resistivity of paint film
- GJB 360.35-1987 Test methods for electronic and electrical components Resistance voltage coefficient test
- GJB 360.30-1987 Test methods for electronic and electrical components Resistance-temperature characteristics test
- GJB 10024-2021 Microelectromechanical gyroscope test method
- GJB 9133-2017 Military electronic test instrument terminology
CZ-CSN, Specific resistance tester
- CSN 72 5042-1973 Testing of fired ceranyc materials. Definition of the specific surface and volume resistivities
- CSN 70 0537-1981 Glass Method for determination oí the spec'fic volume electrical resistanca at elevated temperatures
- CSN 62 1459-1958
- CSN ON 05 2011-1966 Resistance welding machines Climatic těsta
- CSN 35 8137-1987 Thermistors. Marking and tcsting
- CSN 34 7010 Cast.40-1973 Ozone resistance test and discharge resistance test (U-bend test)
- CSN 66 8227-1988 Ohmic resistaneo test of the electric igniters
- CSN 35 8539-1968 Methods of testing anodě resistance of electronic tubes
- CSN IEC 355:1994 Electrotechnical and electronic products.An appraisal of the problems of accelerated testing for atmospheric corrosion
- CSN IEC 345:1992 Methods of test electrical resistance and resistivity of insultating materials at elevated temperatures
- CSN 35 6512-1988 Electronic measuring instruments. General requirements on firmness and resistance at performance of mechanical influences and testing methods
- CSN 35 0013-1971 Insulation resistance test and drying of rotating electrical maehinery
- CSN 34 5615 Z3-1997
- CSN 35 4055 Cast.8-1984 Electromechanical components for electronic equipment. Insulation resistance test
- CSN IEC 93:1993 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
- CSN IEC 51-6:1992 Direct acting indicating analogue electrical measuring instruments and their accessories. Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters conductance meters
- CSN 72 5011-1979 Testing of ceramic electrotechnic materials. Methods of the deter- mination of the specific gravity
Professional Standard - Energy, Specific resistance tester
- DL/T 845.5-2021 General Specifications for Resistance Measuring Devices Part 5: Insulation Resistance Tester for Water Internally Cooled Generators
- DL/T 1694.8-2021 Calibration specification for high voltage testing instruments and equipment Part 8: Power capacitance and inductance tester
机械工业部, Specific resistance tester
- JB/T 7395.5-1994 Electrical measuring instruments terminology standard, detector, stable power supply and comparative measuring instrument
SE-SIS, Specific resistance tester
- SIS SS IEC 524:1982 Electrical measuring instruments — Direct current resistive volt ratio boxes
- SIS SS IEC 477:1982 Electrical measuring instruments - Laborator/ resistors
- SIS SS IEC 345:1982 Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
- SIS SS IEC 93:1983 Methods of test for volume résistivity and surface resistivityof solid electrical insulating materials
BE-NBN, Specific resistance tester
- NBN-EN 60051-6-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters
European Committee for Electrotechnical Standardization（CENELEC）, Specific resistance tester
- EN IEC 61788-4:2020 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors
- EN 60512-25-7:2005 Connectors for electronic equipment Tests and measurements Part 25-7: Test 25g Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
Professional Standard - Earthquake, Specific resistance tester
- DB/T 91-2022 Test specification for DC ground resistivity meter
- DB/T 29.1-2008 Technical requirements of instruments in network for earthquake monitoring.Geoelectrical meters.Part 1: Direct current meter for geoelectrical resistivity
Professional Standard - Ferrous Metallurgy, Specific resistance tester
- YB/T 173-2000 Testing method for cold specific resistivity of carbon-containing refractory products
Association of German Mechanical Engineers, Specific resistance tester
HU-MSZT, Specific resistance tester
PL-PKN, Specific resistance tester
- PN-EN IEC 61788-4-2020-12 E Superconductivity -- Part 4: Residual resistance ratio measurement -- Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (IEC 61788-4:2020)
- PN E04410-21-1986 Electroinsulating varnishes Test methods Testing of volume resistivity
- PN E04160 ArkusZ83-1973 Electric cables Me?bods of ?es?ing Measuring of ?he transfer impedance due to resis?iye and magnetic coupling
- PN O79713-1989 Glass containers Internal pressure resistance Test methods
Professional Standard - Non-ferrous Metal, Specific resistance tester
- YS/T 963-2014 Determinator for electrical resistivity of granules of calcined coke
RO-ASRO, Specific resistance tester
(U.S.) Ford Automotive Standards, Specific resistance tester
Professional Standard - Public Safety Standards, Specific resistance tester
- GA/T 953-2011 Code of practice for specific kinetic energy of firearms muzzle by velocimeter in forensic
- GA/T953-2011 Forensic science muzzle specific kinetic energy velocimetry test procedures
Professional Standard - Aerospace, Specific resistance tester
- QJ 2220.2-1992 Test methods for electrical insulation properties of coatings Test methods for insulation resistance, surface resistivity, and volume resistivity
- QJ 1523-1988 Conductive Adhesive Resistivity Test Method
- QJ 1698-1989 Thermistor Test Specifications
- QJ 1323.21-1987 Electromagnetic Relay Test Method Coil Resistance Test
- QJ 1323.20-1987 Electromagnetic relay test method Insulation resistance test
- QJ 1990.2-1990 Test methods for electrical properties of electrical insulating adhesives Insulation resistance, surface resistivity,
- QJ 1323.22-1987 Electromagnetic relay test method contact resistance (static) test
Institute of Interconnecting and Packaging Electronic Circuits (IPC), Specific resistance tester
Professional Standard - Military and Civilian Products, Specific resistance tester
- WJ 2563-2000 Verification Regulations for Low-resistance Detector of Hongjian-8 Missile
- WJ 2396-1997 Test method for maximum range extinction ratio of solid-state pulsed laser range finder
YU-JUS, Specific resistance tester
- JUS N.C0.036-1980 Testing offlexible cords and cables. Measurements ofinsulation resistance, resistance of semi-conducting layers and surface resistance.
- JUS N.R4.468-1978 Electromechanical components for dectronic equipment. Test methods. Test 17c: Cable clamp, resistance to cable pull (tensUe)
- JUS N.C0.041-1984 Testing ofcables and flexible cords. Resistance to direct voltage
FI-SFS, Specific resistance tester
Society of Automotive Engineers (SAE), Specific resistance tester
AASHTO - American Association of State Highway and Transportation Officials, Specific resistance tester
- TP 119-2015 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test
- T 373M/T 373-2017 Standard Method of Test for Comparative Qualitative Corrosion Characterization of Steel Bars Used for Concrete Reinforcement (Linear Polarization Resistance and Potentiodynamic Polarization Tests)
The American Road & Transportation Builders Association, Specific resistance tester
- AASHTO TP 119-2015 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test
- AASHTO TP 119-2021 Standard Method of Test for Electrical Resistivity of a Concrete Cylinder Tested in a Uniaxial Resistance Test
IEEE - The Institute of Electrical and Electronics Engineers@ Inc., Specific resistance tester
AT-OVE/ON, Specific resistance tester
- OVE EN IEC 61788-4:2021 Superconductivity - Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors (( IEC 61788-4:2020) EN IEC 61788-4:2020) (german version)
International Organization for Standardization (ISO), Specific resistance tester
- ISO 16392:2007 Tyres - Electrical resistance - Test method for measuring electrical resistance of tyres on a test rig
- ISO 16392:2017 Tyres - Electrical resistance - Test method for measuring electrical resistance of tyres on a test rig
- ISO/FDIS 179-1 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
Lithuanian Standards Office , Specific resistance tester
- LST EN 60512-25-7-2005 Connectors for electronic equipment. Tests and measurements. Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR) (IEC 60512-25-7:2004)
- LST EN 60512-21-1-2010 Connectors for electronic equipment - Tests and measurements -- Part 21-1: R.F. resistance tests - Test 21a: R.F. shunt resistance (IEC 60512-21-1:2010)
- LST EN 60512-2-2-2004 Connectors for electronic equipment. Tests and measurements. Part 2-2: Electrical continuity and contact resistance tests. Test 2b: Contact resistance. Specified test current method (IEC 60512-2-2:2003)
- LST HD 438 S1-2002 Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures (IEC 60345:1971)
- LST EN ISO 10447:2007 Resistance welding - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2006)
- LST EN 60512-2-3-2003 Connectors for electronic equipment. Tests and measurements. Part 2-3: Electrical continuity and contact resistance tests. Test 2c: Contact resistance variation (IEC 60512-2-3:2002)
- LST EN 60512-2-1-2003 Connectors for electronic equipment. Tests and measurements. Part 2-1: Electrical continuity and contact resistance tests. Test 2a: Contact resistance. Millivolt level method (IEC 60512-2-1:2002)
ZA-SANS, Specific resistance tester
- SANS 5764:2005 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)
AENOR, Specific resistance tester
- UNE-EN 60512-25-7:2005 Connectors for electronic equipment - Tests and measurements -- Part 25-7: Test 25g - Impedance, reflection coefficient and voltage standing wave ratio (VSWR)
- UNE-EN 60512-2-3:2002 Connectors for electronic equipment - Tests and measurements -- Part 2-3: Electrical continuity and contact resistance tests - Test 2c: Contact resistance variation.
- UNE 21330:1975 METHOD OF TEST FOR ELECTRICAL RESISTANCE AND RESISTIVITY OF INSULATING MATERIALS AT ELEVATED TEMPERATURES.
- UNE-EN 60512-2-1:2002 Connectors for electronic equipment - Tests and measurements -- Part 2-1: Electrical continuity and contact resistance tests - Test 2a: Contact resistance - Millivolt level method.
- UNE 21303:1983 METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS.
Indonesia Standards, Specific resistance tester
- SNI 04-3874-1995 Testing equipment of electric energy meters
- SNI 04-6189-1999 Measurements of winding resistance of an alternating current machines during operation at alternating voltage
- SNI 13-6977-2003 Mineral grain - Determination of specific surface area using test methods of Lea and Nurse permeabilities
- SNI 15-4937.1-1998 Test method for resistance of enamelled articles
- SNI ISO 179-1:2011 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
U.S. Military Regulations and Norms, Specific resistance tester
American National Standards Institute （ANSI), Specific resistance tester
- ANSI/ASTM B84:2001 Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
- ANSI/ASTM B63:2001 Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
- ANSI/ASTM A833:1996 Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
- ANSI/ASTM A712:1997 Test Method for Electrical Resistivity of Soft Magnetic Alloys
- BS EN ISO 179-1:2023 Plastics. Determination of Charpy impact properties Non-instrumented impact test (British Standard)
European Committee for Standardization (CEN), Specific resistance tester
- EN ISO 5764:2009 Milk - Determination of freezing point - Thermistor cryoscope method (Reference method)
- CEN EN 13523-3-2001 Coil Coated Metals - Test Methods - Part 3: Colour Difference - Instrumental Comparison
- EN ISO 17654:2011 Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)
- EN 1637:1999 Light Conveyor Belts - Test Methods for the Measurement of the Electrical Resistances
- EN ISO 14556:2015 Metallic materials - Charpy Vnotch pendulum impact test - Instrumented test method
- EN 13523-3:2014 Coil coated metals - Test methods - Part 3: Colour difference - Instrumental comparison
IPC - Association Connecting Electronics Industries, Specific resistance tester
Defense Logistics Agency, Specific resistance tester
Military Standards (MIL-STD), Specific resistance tester
Institute of Electrical and Electronics Engineers (IEEE), Specific resistance tester
- IEEE Std 118-1978 IEEE Standard Test Code for Resistance Measurement
- IEEE Std 43-2013 IEEE Recommended Practice for Testing Insulation Resistance of Electric Machinery
IT-UNI, Specific resistance tester
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Specific resistance tester
ECIA - Electronic Components Industry Association, Specific resistance tester
- 349-1968 Varistor Definitions and Test Methods
- 275-A-1971 Thermistor Definitions and Test Methods
- 186-13E-1978 Passive Electronic Component Parts@ Test Methods for; Method 13: Insulation Resistance Test
- EIA-364-06B-2000 TP-06B Contact Resistance Test Procedure for Electrical Connectors
- EIA/ECA-364-06C-2006 TP-06C Contact Resistance Test Procedure for Electrical Connectors
- 364-21B-1996 TP-21B Insulation Resistance Test Procedure for Electrical Connectors
- 364-06A-1983 TP-06A Contact Resistance Test Procedure for Electrical Connectors
- EIA-364-06C-2006 TP-06C Contact Resistance Test Procedure for Electrical Connectors
Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Specific resistance tester
- GJB 6401-2008 Test method for resistivity of coating film at high temperature
- GJB/J 5415-2005 Verfication regulation for withstanding voltage tester
Malaysia Standards, Specific resistance tester
- MS 1465 Pt.1-1999 Method of test for determination of plastics resistivity: Part 1: surface resistivity
- MS 1465 Pt.2-1999 Method of test for determination of plastics resistivity: Part 2: volume resistivity
Electronic Components, Assemblies and Materials Association, Specific resistance tester
未注明发布机构, Specific resistance tester
- BS EN 12390-19:2023 Testing of hardened concrete — Determination of electrical resistivity
- DIN EN ISO 179-1:2001 Plastics – Determination of Charpy impact properties – Part 1: Non-instrumented impact testing
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc., Specific resistance tester
- ASHRAE 3941-1996 Predicting Lubricant Performance in Refrigerant Compressors: a Comparison Between Component Testing and Benchtesters
ES-AENOR, Specific resistance tester
AT-ON, Specific resistance tester
- ONORM E 3652-1989 Tests on cables and flexible cords; flame retardance-test on bunched cables
- ONORM S 1419 Teil.1-1982 Textile floor coverings; testing of the electrostatic properties; determination of the electrical resistance
Electronic Components, Assemblies and Materials Association, Specific resistance tester
- ECA 186-13E-1978 Passive Electronic Component Parts, Test Methods for; Method 13: Insulation Resistance Test
JP-JEC, Specific resistance tester
- JEC 0221-2007 INSTRUMENTS USED FOR MEASUREMENTS IN IMPULSE VOLTAGE AND CURRENT TESTS Requirement for instruments
PT-IPQ, Specific resistance tester
- NP EN 13523-3-2002 Coil coated metals Test methods Part 3:Colour difference-Instrumental comparison