ZH
RU
ES
Decarburizer Packing
Decarburizer Packing, Total:136 items.
In the international standard classification, Decarburizer Packing involves: Raw materials for rubber and plastics, Products of the chemical industry, Continuous handling equipment, Power stations in general, Organic chemicals, Miscellaneous domestic and commercial equipment, Construction materials, Burners. Boilers, Dentistry, Valves, Wastes, Textile fibres, Water quality, Hospital equipment, Rubber and plastics products, Fluid storage devices, Welding, brazing and soldering, Insulating materials, Products of the textile industry, Paint coating equipment, Environmental protection, Transformers. Reactors, Equipment for the rubber and plastics industries, Equipment for the chemical industry, Installations in buildings, Paint ingredients, Materials for aerospace construction, ENVIRONMENT. HEALTH PROTECTION. SAFETY, Fuels.
Professional Standard - Light Industry, Decarburizer Packing
轻工业部, Decarburizer Packing
工业和信息化部, Decarburizer Packing
- QB/T 1126-2021 Polyolefin filler masterbatch
- JB/T 13416-2018 Filter media for dust control bag dust collectors in the cement industry
- JB/T 13837-2020 Method for determination of wear resistance of filter materials used in bag dust collectors
- JB/T 13836-2020 Method for determination of pore size characteristics of filter materials used in bag dust collectors
Cooling Technology Institute, Decarburizer Packing
- CTI STD-136-2010 Thermoplastic Materials Used for Film Fill, Splash Fill, Louvers And Drift Eliminators
- CTI STD-136-2000 Polyvinyl Chloride and Chlorinated Polyvinyl Chloride Materials Used for Film Fill, Splash Fill, Louvers and Drift Eliminators
YU-JUS, Decarburizer Packing
- JUS B.B3.045-1982 Mineral filler for hydrocarbon mixtures. Technical requirements
- JUS H.C8.223-1989 Pigments and extenders. Determination of density (using a centrifuge to remove entrained air)
ZA-SANS, Decarburizer Packing
Professional Standard - Electricity, Decarburizer Packing
- DL/T 933-2005 Test methods for determining the performance of cooling tower of transfer packing, drift eliminator and sprayer
Japanese Industrial Standards Committee (JISC), Decarburizer Packing
CZ-CSN, Decarburizer Packing
GM North America, Decarburizer Packing
- GM GMP.E/P.009-1993 Polyolefin Alloy - Mineral Filled, Modified Do Not Use on New Drawings; Scheduled for Deletion Replaced by GMP.E/P.023
- GM GMP.E/P.021-1993 Polyolefin Alloy - 28% Mineral Filled, 1600 MPa Flexural Modulus Do Not Use on New Drawings; Scheduled for Deletion Replaced by GMP.E/P.013
- GM GMP.E/P.031-1993 Polyolefin Alloy - 20% Mineral Filled, Black 1650 MPa Flexural Modulus Do Not Use on New Drawings; Scheduled for Deletion Replaced by GMP.E/P.013
- GM GMP.E/P.027-1993 Polyolefin Alloy - 27% Mineral Filled, 1700 MPa Flexural Modulus, Injection Molding Grade Do Not Use on New Drawings; Scheduled for Deletion Replaced by GMP.E/P.013
American Society for Testing and Materials (ASTM), Decarburizer Packing
- ASTM C1080-98(2003)e1 Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers
- ASTM C1080-98 Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers
- ASTM C1080-98(2003) Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers
- ASTM C1080-98(2014) Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers
- ASTM C1080-98(2008) Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers
- ASTM D7174-05(2016) Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
- ASTM D7174-05(2022) Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
- ASTM F106-06 Standard Specification for Brazing Filler Metals for Electron Devices
- ASTM F106-12(2017) Standard Specification for Brazing Filler Metals for Electron Devices
- ASTM D7174-05 Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
- ASTM D4568-86 Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Cable Materials
- ASTM D4568-99(2009) Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
- ASTM D4568-13 Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
- ASTM D4568-99 Standard Test Methods for Evaluating Compatibility Between Cable Filling And Flooding Compounds And Polyolefin Wire and Cable Materials
- ASTM D4568-99(2004)e1 Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
- ASTM D7174-05(2011) Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
- ASTM E1559-03 Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
- ASTM D4568-13(2020) Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Wire and Cable Materials
- ASTM D240-02(2007) Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-92(1997)e2 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-00 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-02 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- ASTM D240-09 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
Korean Agency for Technology and Standards (KATS), Decarburizer Packing
- KS B 8007-1988(1998) FILLER PUMPS FOR OIL BURNING APPLIANCES
- KS B 8008-2010(2020) Filler pumps for oil burning appliances
- KS B ISO 11513:2012 Gas cylinders-Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging(excluding acetylene)-Design, construction, testing, use and periodic inspection
- KS M ISO 787-23-2007(2017) General methods of test for pigments and extenders－Part 23：Determination of density (using a centrifuge to remove entrained air)
U.S. Military Regulations and Norms, Decarburizer Packing
Professional Standard - Petrochemical Industry, Decarburizer Packing
- SH/T 0239-1992 Determination of C6~C9alkanes, cycloalkanes and aromatics in reformed feedstock oil and its produced oil (thin-layer packed column chromatography)
FI-SFS, Decarburizer Packing
U.S. Air Force, Decarburizer Packing
- AIR FORCE MIL-PRF-7891 F (1)-1998 FILLER VALVE, AIRCRAFT OXYGEN
- AIR FORCE MIL-PRF-7891 F-1997 FILLER VALVE, AIRCRAFT OXYGEN
- AIR FORCE MIL-V-25469 H NOTICE 1-1996 VALVES, FILLER, LIQUID OXYGEN, AIRCRAFT TYPE
- AIR FORCE MIL-V-25469 H-1990 VALVES, FILLER, LIQUID OXYGEN, AIRCRAFT TYPE
- AIR FORCE QPL-25469-11-2003 VALVES, FILLER, LIQUID OXYGEN, AIRCRAFT TYPE
Aerospace Industries Association, Decarburizer Packing
HU-MSZT, Decarburizer Packing
Taiwan Provincial Standard of the People's Republic of China, Decarburizer Packing
Group Standards of the People's Republic of China, Decarburizer Packing
- T/JSWA 003-2021 Submersible MBBR Flow Propeller
- T/CAQI 58-2018 Biological treatment of sewage and wastewater Technical specification of removal of aging biofilm on suspended filler
- T/ZZB 2626-2022 Needle punched nonwovens with superfine fiber layer for bag house
- T/ZZB 2533-2021 Multi-component nonwoven for bag house
Defense Logistics Agency, Decarburizer Packing
- DLA MS28782 REV E VALID NOTICE 1-2010 Retainer, Packing, Back-up, Teflon
- DLA MS28774 REV L VALID NOTICE 2-2008 RETAINER, PACKING BACKUP, SINGLE TURN TETRAFLUOROETHYLENE
- DLA MS27595 REV E VALID NOTICE 1-2010 Retainer, Packing Backup, Continuous Ring, Polytetrafluoroethylene
- DLA MS28773 REV A VALID NOTICE 1-2010 Retainer, Packing Back-Up, Tetrafluoroethylene, Straight Thread Tube Fitting Boss
British Standards Institution (BSI), Decarburizer Packing
- BS 1425-1:1991 Cleanliness of fillings and stuffings for bedding, upholstery and other domestic articles - Specification for fillings and stuffings other than feather and/or down
- BS 2992:1970 Specification for painters' and decorators' brushes for local authorities and public institutions (excluding quality of fillings)
- BS EN 12012-4:2006 Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
- BS EN ISO 787-23:1980 General methods of test for pigments and extenders - Determination of density (using a centrifuge to remove entrained air)
Institute of Electrical and Electronics Engineers (IEEE), Decarburizer Packing
- IEEE Std 1069-1991 IEEE Recommended Practice for Precipitator and Baghouse Hopper Heating Systems
Professional Standard - Machinery, Decarburizer Packing
- JB/T 8625-2008 Level controller standard for the electrostatic precipitator
- JB/T 8625-1997 Electrostatic precipitator swing contact material level controller
- JB/T 7817-1995 Marine filler-enclosed tube fuse
- JB/T 12125-2015 Pure polytetrafluoroethylene filter fabric laminated with membrane for bag filter
- JB/T 11823-2014 High gradient magnetic separator for port conveying material purification
- JB/T 11310-2012 Fabric for bag filter of exhaust gas treatment in solid waste incinerator
- JB/T 11261-2012 Fabric for bag filter of tail gas treatment in coal-fired power plant boiler
- JB/T 11261-2023 Tail gas treatment in coal-fired power plant boiler— Fabric for bag filter
AIA/NAS - Aerospace Industries Association of America Inc., Decarburizer Packing
(U.S.) Ford Automotive Standards, Decarburizer Packing
- FORD WSS-M4D670-B1-2015 THERMOPLASTIC POLYOLEFIN ELASTOMER, (TEO) MOLDING COMPOUND, <12% MINERAL FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D714-A2-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) 27% MINERAL FILLED MOLDING COMPOUND PAINTABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D873-B1-2012 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED, MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D873-B1-2013 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED, MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D873-B1-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED, MOLDING COMPOUND, MOLD-IN-COLOR, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D550-A10-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, MOLDED IN COLOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSS-M4D713-A8-2021 THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO), 5% WOLLASTONITE FILLED, COLOR PIGMENTED, UV STABILIZED, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
- FORD WSK-M4D550-A-2010 THERMOPLASTIC POLYOLEFIN ELASTOMER (TPO) 15% MINERAL FILLED, MEDIUM HIGH IMPACT MOLDING COMPOUND, HIGH SCRATCH RESISTANT MOLDING COMPOUND, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
United States Navy, Decarburizer Packing
American National Standards Institute （ANSI), Decarburizer Packing
- ANSI/ASTM D4568:2013 Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds And Polyolefin Wire and Cable Materials
CU-NC, Decarburizer Packing
- NC 32-54-1988 Paints and Varnishes Oxide Remover Quality Specifications
SAE - SAE International, Decarburizer Packing
- SAE ARP6059-2013 Solid De-Icing/Anti-Icing Material Spreader for Airport Application
- SAE AS8791-1997 Retainer@ Packing@ Hydraulic and Pneumatic@ Tetrafluoroethylene Resin
- SAE J223-1995 Symbols and Color Codes for Maintenance Instructions@ Container and Filler Identification (The PDF is not Available)
Society of Automotive Engineers (SAE), Decarburizer Packing
- SAE ARP6059A-2023 Solid De-Icing/Anti-Icing Material Spreader for Airport Application
- SAE J223-1992 Symbols and Color Codes for Maintenance Instructions, Container and Filler Identification
Association Francaise de Normalisation, Decarburizer Packing
- NF T31-201*NF EN ISO 787-23:1995 General methods of tests for pigments and extenders. Part 23 : determination of density (using a centrifuge to remove entrained air).
NL-NEN, Decarburizer Packing
Danish Standards Foundation, Decarburizer Packing
- DS 753:1955 Fire protection. A-fixed coupling with rubber packing
- DS 754:1955 Fire oritection. B-fixed coupling with rubber packing
- DS 755:1955 Fire protection. C-fixed coupling with rubber packing
- DS 756:1955 Fire protectopn. D-fixed coupling with rubber packing
- DS/EN 15334:2007 Sanitary appliances - Methacrylic dispersions of high filler content
German Institute for Standardization, Decarburizer Packing
- DIN 28163:1983 Stuffing box for agitator shafts of carbon and stainless steel
- DIN 42562-1:1987 Transformers; silica gel breathers with fillings of 1,2 to 4,8 kg; assembly
- DIN 42562-2:1987 Transformers; silica gel breathers with fillings of 1,2 to 4,8 kg; components
- DIN 28162-2:1983 Agitator gear stools for agitator drives with gland sealing
- DIN EN 15334:2007-05 Sanitary appliances - Methacrylic dispersions of high filler content; German version EN 15334:2007
- DIN 28156:2021-06 Shaft end for agitators of carbon and stainless steel, for stuffing boxes - Dimensions
- DIN 28156:1981 Shaft end for agitators of carbon and stainless steel, for stuffing boxes; dimensions
- DIN 28156:2021 Shaft end for agitators of carbon and stainless steel, for stuffing boxes - Dimensions
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Decarburizer Packing
- GB 12625-1990 Technical requirements of fabric and bag for bag filter
Indonesia Standards, Decarburizer Packing
工业和信息化部/国家能源局, Decarburizer Packing
- JB/T 13560-2018 Test method for folding resistance of filter materials used in bag dust collectors
- JB/T 13559-2018 Test method for high temperature tensile properties of bag dust collector filter materials
IT-UNI, Decarburizer Packing
PL-PKN, Decarburizer Packing
- PN A55543-1991 Stuffing mixers. Basic parameters, requirements and testing methods
IPC - Association Connecting Electronics Industries, Decarburizer Packing
Lithuanian Standards Office , Decarburizer Packing
- LST EN 15334-2007 Sanitary appliances - Methacrylic dispersions of high filler content
AENOR, Decarburizer Packing
- UNE-EN 15334:2007 Sanitary appliances - Methacrylic dispersions of high filler content
Professional Standard - Environmental Protection, Decarburizer Packing
- HJ/T 324-2006 Specifications for environmental protection product. Fabric for bag house
RO-ASRO, Decarburizer Packing