ZH
RU
ES
What are the testers
What are the testers, Total:84 items.
In the international standard classification, What are the testers involves: Electric filters, Nuclear energy engineering, Water quality, Laboratory medicine, Medical equipment, Power stations in general, Power transmission and distribution networks, Transformers. Reactors, Measurement of fluid flow, Wastes, Surface treatment and coating, Equipment for the metallurgical industry, Road vehicles in general, Optical equipment, Electronic components in general, Analytical chemistry, Earthworks. Excavations. Foundation construction. Underground works, Lubricants, industrial oils and related products, Protective equipment, Alarm and warning systems, Rubber and plastics products, Soil quality. Pedology.
Korean Agency for Technology and Standards (KATS), What are the testers
- KS C IEC 60939-3:2019 Passive filter units for electromagnetic interference suppression — Part 3: Passive filter units for which safety tests are appropriate
- KS P ISO 15004-1:2018 Ophthalmic instruments — Fundamental requirements and test methods — Part 1: General requirements applicable to all ophthalmic instruments
- KS M ISO 7765-2:2002 Plastics film and sheeting－Determination of impact resistance by the free－falling dart method－Part 2：Instrumented puncture test
KR-KS, What are the testers
- KS C IEC 60939-3-2019 Passive filter units for electromagnetic interference suppression — Part 3: Passive filter units for which safety tests are appropriate
- KS P ISO 15004-1-2018 Ophthalmic instruments — Fundamental requirements and test methods — Part 1: General requirements applicable to all ophthalmic instruments
International Electrotechnical Commission (IEC), What are the testers
- IEC 60939-3:2015 Passive filter units for electromagnetic interference suppression - Part 3: Passive filter units for which safety tests are appropriate
- IEC 62321-8:2017 Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS)
Professional Standard - Petroleum, What are the testers
US-CFR-file, What are the testers
- CFR 40-60.5413-2013 Protection of Environment. Part60:Standards of performance for new stationary sources. Section60.5413:What are the performance testing procedures for control devices used to demonstrate compliance at my storage vessel or centrifugal compressor affected fa
- CFR 40-63.144-2014 Protection of Environment. Part63:National emission standards for hazardous air pollutants for source categories. Section63.144:Process wastewater provisions—test methods and procedures for determining applicability and Group 1/Group 2 determinations (det
British Standards Institution (BSI), What are the testers
- BS EN IEC 62372:2022 Nuclear instrumentation. Housed scintillators. Test methods of light output and intrinsic resolution
- 19/30351471 DC BS EN ISO 15004-1. Ophthalmic instruments. Fundamental requirements and test methods. Part 1. General requirements applicable to all ophthalmic instruments
- BS EN 50241-1:1999 Specification for open path apparatus for the detection of combustible or toxic gases and vapours - General requirements and test methods
National Metrological Technical Specifications of the People's Republic of China, What are the testers
Indonesia Standards, What are the testers
- SNI 06-2510-1991 Water, Test methods for organic phosphate content by gas chromatography apparatus
- SNI 06-2508-1991 Water, Test methods for organic chlor pesticide content by gas chromotography apparatus
- SNI 06-2505-1991 Water, Test methods for total organic carbon content by infrared KOT analyzers
- SNI 06-6991.1-2004 Soils - Part 1: Test methods of organochlorine pesticides with extraction using n-hexane solvent by gas chromatography-mass spectrophotometers (GC-MS)
German Institute for Standardization, What are the testers
- DIN EN IEC 62372:2023-03 Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic resolution (IEC 62372:2021); German version EN IEC 62372:2022
- DIN 50158-1:2008-07 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 1: Test method
- DIN EN ISO 15004-1:2021-05 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020); German version EN ISO 15004-1:2020 / Note: DIN EN ISO 15004-1 (2009-07) remains valid alongsi...
- DIN EN ISO 15004-1:2019 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO/DIS 15004-1:2019); German and English version prEN ISO 15004-1:2019
- DIN 51810-2:2017-04 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
- DIN 51810-4:2021-04 Testing of lubricants - Determination of the consistency of metal saponified lubricating greases using an oscillatory rheometer with a cone/plate system
- DIN 50158-2:2008-04 Metallic materials - Hardness testing with portable measuring instruments operating with electrical penetration depth - Part 2: Verification and calibration of the testing devices
- DIN 51810-2:2017 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
- DIN 51810-4:2021 Testing of lubricants - Determination of the consistency of metal saponified lubricating greases using an oscillatory rheometer with a cone/plate system
- DIN 51810-2:2011 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
- DIN EN ISO 15004-1:2009 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2006); English version of DIN EN ISO 15004-1:2009-07
CZ-CSN, What are the testers
- CSN 35 6858-1976 Instruments with piezoelectric pick-ups for service vibratlon measurement. Metrologic testing
- CSN 36 6150-1987 Telegraph apparatus wiih 5 element code. Basic parameters, lechnica! requirements and lesting methods
- CSN 35 6534-1987 Electronic measuring instruments. Signal measuring generators with coaxial output. General technical requirements and testing methods
Professional Standard - Medicine, What are the testers
- YY/T 0456.4-2014 Reagents for hematology analyzer.Part 4:Nucleated red blood cell enumeration reagents
RU-GOST R, What are the testers
- GOST R 53518-2009 Ophtnalmic instruments. Part 1. General requirements applicable to all ophthalmic instruments and test methods
Professional Standard - Electricity, What are the testers
- DL/T 846.8-2004 General technical specifications for high voltage test equipments Part 8: detector of on-load tap-changers
- DL/T 846.8-2017 General Specifications for High Voltage Test Equipment Part 8: On-load tap-changer tester
Group Standards of the People's Republic of China, What are the testers
- T/CEC 481-2021 Technical specification for vibration characteristic tester of transformer on-load tap-changer
American Society for Testing and Materials (ASTM), What are the testers
- ASTM D5089-95(2008) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
- ASTM D8174-18 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester
- ASTM D8175-18 Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester
- ASTM D4060-10 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
- ASTM D522-93a(2008) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
- ASTM F457-04 Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
- ASTM F457-04(2010) Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
- ASTM D6132-13(2022) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
- ASTM F457-04(2017) Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
- ASTM D6132-13 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
- ASTM F1930-00 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash Fire Simulations Using an Instrumented Manikin
- ASTM D6132-04 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage
- ASTM D6132-97 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Over Concrete Using an Ultrasonic Gage
- ASTM D6132-08 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage
- ASTM D6132-13(2017) Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage
ES-UNE, What are the testers
- UNE-EN IEC 62372:2022 Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic resolution (Endorsed by Asociación Española de Normalización in January of 2023.)
- UNE-EN ISO 15004-1:2021 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)
- UNE-EN 50436-2:2014/A1:2015 Alcohol interlocks - Test methods and performance requirements - Part 2: Instruments having a mouthpiece and measuring breath alcohol for general preventive use (Endorsed by AENOR in April of 2015.)
- UNE-EN 50436-2:2014 Alcohol interlocks - Test methods and performance requirements - Part 2: Instruments having a mouthpiece and measuring breath alcohol for general preventive use (Endorsed by AENOR in March of 2014.)
Danish Standards Foundation, What are the testers
- DS/EN ISO 15004-1:2009 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments
- DS/EN ISO 15004-1:2020 Ophthalmic instruments – Fundamental requirements and test methods – Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)
IT-UNI, What are the testers
- UNI EN ISO 15004-1:2021 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments
International Organization for Standardization (ISO), What are the testers
- ISO 15004-1:2020 Ophthalmic instruments — Fundamental requirements and test methods — Part 1: General requirements applicable to all ophthalmic instruments
Association Francaise de Normalisation, What are the testers
- NF EN ISO 15004-1:2020 Instruments ophtalmiques - Exigences fondamentales et méthodes d'essai - Partie 1 : exigences générales applicables à tous les instruments ophtalmiques
- NF S10-045:1999 Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field.
- NF P94-074:1994 Soils : investigation and testing. Shear strength tests with revolving triaxial test apparatus. Apparatus. Preparation of test specimens. Unconsolidated and undrained (UU) test. Consolidated and undrained (Cu+U) test with measurement of the interstitial p
Japanese Industrial Standards Committee (JISC), What are the testers
- JIS T 15004-1:2022 Ophthalmic instruments -- Fundamental requirements and test methods -- Part 1: General requirements applicable to all ophthalmic instruments
工业和信息化部, What are the testers
- YS/T 1186-2017 Falling sand tester for testing the wear resistance of anodized films and organic polymer films on aluminum surfaces
European Committee for Standardization (CEN), What are the testers
- EN ISO 15004-1:2020 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)
- EN ISO 15004-1:2009 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2006)
- PD CEN/TS 1071-7:2003 Advanced technical ceramics Methods of test for ceramic coatings Part 7: Determination of hardness and Young磗 modulus by instrumented indentation testing
CEN - European Committee for Standardization, What are the testers
- EN ISO 15004-1:2006 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments
Lithuanian Standards Office , What are the testers
- LST EN ISO 15004-1:2009 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2006)
- LST EN ISO 15004-1:2021 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)
AT-ON, What are the testers
- OENORM EN ISO 15004-1:2021 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)
CH-SNV, What are the testers
- SN EN ISO 15004-1:2021 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)
PL-PKN, What are the testers
- PN-EN ISO 15004-1-2021-05 E Ophthalmic instruments -- Fundamental requirements and test methods -- Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2020)
- PN Z04158-02-1986 Air purity protection ests for ethers etermination of diethyl ether in work laces by gas chromatography with ample enrichment
- PN Z04207-03-1990 Air punty protection Tests for mercaptans Determination of ethyl mercaptan n work places by gas chromatography ith flame ionization detection
- PN Z04207-04-1992 Air purity protection Tests for mercaptans Determination of methyl mercaptan n work places by gas chromatography with flame ionization detection
- PN Z04159-10-1989 Air purity protection ests for phenol etermination of phenol in permanent esidence area air by gas hromatography with sample nrichment
- PN Z04045-10-1990 Air purity protection Tcsts lor aldehydes Dctermination of formaldehyde in pcrmanent residence area air by uas chromatooraphy with sample cnrichment
AENOR, What are the testers
- UNE-EN ISO 15004-1:2009 Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requirements applicable to all ophthalmic instruments (ISO 15004-1:2006)
IN-BIS, What are the testers
- IS 13875 Pt.1-1993 Digital Measuring Instruments for Measurement and Control Part 1 General Specifications Concerning Terms Tests and Data Sheet Details
CENELEC - European Committee for Electrotechnical Standardization, What are the testers
- EN 50241-1:1999 Specification for Open Path Apparatus for the Detection of Combustible or Toxic Gases and Vapours@ Part 1: General Requirements and Test Methods
European Committee for Electrotechnical Standardization（CENELEC）, What are the testers
- DIN EN 62321-8:2017 Determination of certain substances in electrotechnical products - Part 8: Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas chromatography-mass spectrometry using a pyrolyzer/thermal desorption accessory (Py/TD-GC-MS) (IEC 62321